extended ascii - Page 76

ASA 5505 stops local internet when connected to VPN

- by g18c

Hi I have a Cisco ASA router running firmware 8.2(5) which hosts an internal LAN on 192.168.30.0/24. I have used the VPN Wizard to setup L2TP access and I can connect in fine from a Windows box and can ping hosts behind the VPN router. However, when connected to the VPN I can no longer ping out to my internet or browse web pages. I would like to be able to access the VPN, and also browse the internet at the same time - I understand this is called split tunneling (have ticked the setting in the wizard but to no effect) and if so how do I do this? Alternatively, if split tunneling is a pain to setup, then making the connected VPN client have internet access from the ASA WAN IP would be OK. Thanks, Chris names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.30.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address 208.74.158.58 255.255.255.252 ! ftp mode passive access-list inside_nat0_outbound extended permit ip any 10.10.10.0 255.255.255.128 access-list inside_nat0_outbound extended permit ip 192.168.30.0 255.255.255.0 192.168.30.192 255.255.255.192 access-list DefaultRAGroup_splitTunnelAcl standard permit 192.168.30.0 255.255.255.0 access-list DefaultRAGroup_splitTunnelAcl_1 standard permit 192.168.30.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool LANVPNPOOL 192.168.30.220-192.168.30.249 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 192.168.30.0 255.255.255.0 route outside 0.0.0.0 0.0.0.0 208.74.158.57 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 timeout floating-conn 0:00:00 dynamic-access-policy-record DfltAccessPolicy http server enable http 192.168.30.0 255.255.255.0 inside snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 TRANS_ESP_3DES_SHA crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.30.3 vpn-tunnel-protocol l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value DefaultRAGroup_splitTunnelAcl_1 username user password Cj7W5X7wERleAewO8ENYtg== nt-encrypted privilege 0 tunnel-group DefaultRAGroup general-attributes address-pool LANVPNPOOL default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum client auto message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global prompt hostname context : end

Read the article

MPLS basic configuration

- by Vineet Menon

I want to test out MPLS VPN in my lab. I have 3 routers. 2 PEs and 1P router, all cisco 2921. Something like this, ----- ---- ----- | PE1 |.1____192.168.1.0____.2| P |.2____192.168.2.0____.1| PE2 | | | | | | | ----- ---- ----- lo0:10.1.1.1 lo0:10.1.1.2 lo0:10.1.1.3 Here's the configuration file for each of them, PE1 router hostname PE1 ! no ipv6 cef ip source-route ip cef ! ! ! ip vrf cust1 rd 100:100 route-target export 100:100 route-target import 100:100 ! ! interface Loopback0 ip address 10.1.1.1 255.255.255.255 ! interface GigabitEthernet0/0 ip address 192.168.1.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 ip vrf forwarding cust1 ip address 172.16.1.1 255.255.255.0 duplex auto speed auto ! router ospf 1 network 10.1.1.1 0.0.0.0 area 0 network 192.168.1.0 0.0.0.255 area 0 ! router bgp 100 bgp log-neighbor-changes neighbor 10.1.1.3 remote-as 100 neighbor 10.1.1.3 update-source Loopback0 neighbor 172.16.1.2 remote-as 65001 ! address-family vpnv4 neighbor 10.1.1.3 activate neighbor 10.1.1.3 send-community extended exit-address-family For P router: hostname P ! no ipv6 cef ip source-route ip cef ! interface Loopback0 ip address 10.1.1.2 255.255.255.255 ! interface GigabitEthernet0/1 ip address 192.168.1.2 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/2 ip address 192.168.2.2 255.255.255.0 duplex auto speed auto ! router ospf 1 network 10.1.1.2 0.0.0.0 area 0 network 192.168.1.0 0.0.0.255 area 0 network 192.168.2.0 0.0.0.255 area 0 ! For PE2 router: ! hostname PE2 ! no ipv6 cef ip source-route ip cef ! ! ! ip vrf cust1 rd 100:100 route-target export 100:100 route-target import 100:100 ! ! ! interface Loopback0 ip address 10.1.1.3 255.255.255.0 ! interface GigabitEthernet0/0 ip address 192.168.2.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 ip vrf forwarding cust1 ip address 172.16.2.1 255.255.255.0 duplex auto speed auto ! router ospf 1 network 10.1.1.3 0.0.0.0 area 0 network 192.168.2.0 0.0.0.255 area 0 ! router bgp 100 bgp log-neighbor-changes neighbor 10.1.1.1 remote-as 100 neighbor 10.1.1.1 update-source Loopback0 neighbor 172.16.2.2 remote-as 65001 ! address-family vpnv4 neighbor 10.1.1.1 activate neighbor 10.1.1.1 send-community extended exit-address-family ! I am following this article form cisco. But things are not working properly. Any help would be appreciated.

Read the article

TFS 2010 Basic Concepts

- by jehan

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Here, I’m going to discuss some key Architectural changes and concepts that have taken place in TFS 2010 when compared to TFS 2008. In TFS 2010 Installation, First you need to do the Installation and then you have to configure the Installation Feature from the available features. This is bit similar to SharePoint Installation, where you will first do the Installation and then configure the SharePoint Farms. 1) Installation Features available in TFS2010: a) Basic: It is the most compact TFS installation possible. It will install and configure Source Control, Work Item tracking and Build Services only. (SharePoint and Reporting Integration will not be possible). b) Standard Single Server: This is suitable for Single Server deployment of TFS. It will install and configure Windows SharePoint Services for you and will use the default instance of SQL Server. c) Advanced: It is suitable, if you want use Remote Servers for SQL Server Databases, SharePoint Products and Technologies and SQL Server Reporting Services. d) Application Tier Only: If you want to configure high availability for Team Foundation Server in a Load Balanced Environment (NLB) or you want to move Team Foundation Server from one server to other or you want to restore TFS. e) Upgrade: If you want to upgrade from a prior version of TFS. Note: One more important thing to know here about TFS 2010 Basic is that, it can be installed on Client Operations Systems(Windows 7 and Windows Vista SP3), Where as earlier you cannot Install previous version of TFS (2008 and 2005) on client OS. 2) Team Project Collections: Connect to TFS dialog box in TFS 2008: In TFS 2008, the TFS Server contains a set of Team Projects and each project may or may not be independent of other projects and every checkin gets a ever increasing changeset ID irrespective of the team project in which it is checked in and the same applies to work items also, who also gets unique Work Item Ids.The main problem with this approach was that there are certain things which were impossible to do; those were required as per the Application Development Process. a) If something has gone wrong in one team project and now you want to restore it back to earlier state where it was working properly then it requires you to restore the Database of Team Foundation Server from the backup you have taken as per your Maintenance plans and because of this the other team projects may lose out on the work which is not backed up. b) Your company had a merge with some other company and now you have two TFS servers. One TFS Server which you are working on and other TFS server which other company was working and now after the merge you want to integrate the team projects from two TFS servers into one, which is almost impossible to achieve in TFS 2008. Though you can create the Team Projects in one server manually (In Source Control) which you want to integrate from the other TFS Server, but will lose out on History of Change Sets and Work items and others which are very important. There were few more issues of this sort, which were difficult to resolve in TFS 2008. To resolve issues related to above kind of scenarios which were mainly related TFS Maintenance, Integration, migration and Security, Microsoft has come up with Team Project Collections concept in TFS 2010.This concept is similar to SharePoint Site Collections and if you are familiar with SharePoint Architecture, then it will help you to understand TFS 2010 Architecture easily. Connect to TFS dialog box in TFS 2010: In above dialog box as you can see there are two Team Project Collections, each team project can contain any number of team projects as you can see on right side it shows the two Team Projects in Team Project Collection (Default Collection) which I have chosen. Note: You can connect to only one Team project Collection at a time using an instance of TFS Team Explorer. How does it work? To introduce Team Project Collections, changes have been done in reorganization of TFS databases. TFS 2008 was composed of 5-7 databases partitioned by subsystem (each for Version Control, Work Item Tracking, Build, Integration, Project Management...) New TFS 2010 database architecture: TFS_Config: It’s the root database and it contains centralized TFS configuration data, including the list of all team projects exist in TFS server. TFS_Warehouse: The data warehouse contains all the reporting data of served by this server (farm). TFS_* : This contains individual team project collection data. This database contains all the operational data of team project collection regardless of subsystem.In additional to this, you will have databases for SharePoint and Report Server. 3) TFS Farms: As TFS 2010 is more flexible to configure as multiple Application tiers and multiple Database tiers, so it will be more appropriate to call as TFS Farm if you going for multi server installation of TFS. NLB support for TFS application tiers – With TFS 2010: you can configure multiple TFS application tier machines to serve the same set of Team Project Collections. The primary purpose of NLB support is to enable a cleaner and more complete high availability than in TFS 2008. Even if any application tier in the farm fails then farm will automatically continue to work with hardly any indication to end users of a problem. SQL data tiers: With 2010 you can configure many SQL Servers. Each Database can be configured to be on any SQL Server because each Team Project Collection is an independent database. This feature can also be used to load balance databases across SQL Servers.These new capabilities will significantly change the way enterprises manage their TFS installations in the future. With Team Project Collections and TFS farms, you can create a single, arbitrarily large TFS installation. You can grow it incrementally by adding ATs and SQL Servers as needed.

Read the article

Bye Bye Year of the Dragon, Hello BPM

- by Ajay Khanna

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} As 2012 fades and we usher in a New Year, let’s look back at some of the hottest BPM trends and those we’ll be seeing more of in the coming months. BPM is as much about people as it is about technology. As people adopt new ways of engagement, new channels of communications and new devices to interact , the changes are reflected in BPM practices. As Social and Mobile have become an integral part of our personal and professional lives, we’ll see tighter integration of social and mobile with BPM, and more use cases emerging for smarter process management in 2013. And with products and services becoming less differentiated, organizations will strive to differentiate on Customer Experience. Concepts like Pace Layered Architecture and Dynamic Case Management will provide more flexibility and agility to IT groups and knowledge workers. Take a look at some of these capabilities we showcased (see video) at Oracle OpenWorld 2012. Some of these trends that will continue to gain momentum in 2013: Social networks and social media have provided a new way for businesses to engage with customers. A prospect is likely to reach out to their social network before making any purchase. Companies are increasingly engaging with customers in social networks to influence their purchasing decisions, as well as listening to customers via tools like sentiment analysis to see what customers think about a particular product or process. These insights are valuable as companies look to improve their processes. Inside organizations, workers are using social tools to engage with each other to design new products and processes. Social collaboration tools are being used to resolve issues where an employee needs consultation to reach a decision. Oracle BPM Suite includes social interaction as an integral part of its process design and work management to empower today’s business users. Ubiquitous smart mobile devices are trending as a tool of choice for many workers. Many companies are adopting the policy of “Bring Your Own Device,” and the device of choice is a tablet. Devices like smart phones and tablets not only provide mobility to workers and customers, but they also provide additional important information – the context. By integrating the mobile context (location, photos, and preferences) into your processes, organizations can make much more informed decisions, as well as offer more personalized service to customers. Using Oracle ADF Mobile, you can easily create user interfaces for mobile devices and also capture location data for process execution. Customer experience was at the forefront of trending topics in 2012. Organizations are trying to understand their customers better and offer them more personalized and differentiated services. Customer experience is paramount when companies design sales and support processes. Companies are looking to BPM to consistently and efficiently orchestrate customer facing processes across disparate systems, departments and channels of communication. Oracle BPM Suite provides just the right capabilities for organizations to design and deliver an excellent customer experience. Pace Layered Architecture strategy is gaining traction as a way to maximize agility and minimize disruption in organizations. It provides a framework to manage the evolution of your information system when different pieces of it are changing at different rates and need to be updated independent of one another. Oracle Fusion Middleware and Oracle BPM Suite are designed with this in mind. The database layer, integration layer, application layer, and process layer should not be required to change at the same time. Most of the business changes to policy or process can be done at the process layer without disrupting the whole infrastructure. By understanding the type of change needed at a particular level, organizations can become much more agile and efficient. Adaptive Case Management proposes more flexibility to manage processes or cases that do not follow a structured process flow. In such situations, the knowledge worker managing the case needs to evaluate what step should occur next because the sequence of steps can’t be predetermined. Another characteristic is that it requires much more collaboration than straight-through process. As simple processes become automated, and customers adopt more and more self-service, cases that reach the case workers are much more complex and need more investigation. Oracle BPM suite includes comprehensive adaptive case management capability to manage such unstructured and complex processes. Smart BPM or making your BPM intelligent has been the holy grail for BPM practitioners who imagined that one day BPM would become one with Business Intelligence, Business Activity Monitoring and Complex Event Processing, making it much more responsive and helpful in organizational decision making. In 2013, organizations will begin to deploy these intelligent BPM solutions. Oracle offers an integrated solution that brings together the powerful functionality of BI, BAM, event processing, and Real Time Decisions to help organizations create smart process based solutions. In order to help customers reach their BPM goals faster and remove risks associated with BPM initiatives, Oracle has introduced Oracle Process Accelerators, pre-built best practices applications built on Oracle BPM Suite that are fully production grade and ready to deploy. These are exiting times for BPM practitioners and there is so much to look forward to in 2013. We wish you a very happy and prosperous New Year 2013. Happy BPMing!

Read the article

How Mary Meeker’s Latest Findings May Make You Re-Imagine Commerce

- by Brenna Johnson-Oracle

0 0 1 954 5439 Endeca Technologies 45 12 6381 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Today, Mary Meeker released her highly anticipated annual “Internet Trends” presentation for 2014. All 164 slides are jam-packed with pretty much everything you need to know about the state of the Internet. And as luck would have it, Oracle is staying ahead of these trends (but we’ll talk about that later). There were a few surprises, some stats to solidify what you likely already know, and Meeker’s novel observations about where we are all going. What interested me the most is not only how people are engaging in their personal lives, but how they engage with brands. As you could probably predict, Internet usage growth is slowing while tablet user and mobile data traffic growth continue their meteoric rise around the globe, with tremendous growth in underpenetrated markets like China, India, Brazil and Indonesia. Now hold those the “Internet is dead” comments. Keep in mind there’s still plenty of room to grow, and a multiscreen model is Meeker’s vision for our future. Despite 1.5x YOY growth for mobile traffic, mobile still only makes up about 23% of all traffic today. With tablet shipments easily outpacing figures for PCs even at their height (in 2007), mobile will only continue on it’s path, but won’t be everything to everyone. Mobile won’t replace every touchpoint, it’s just created our shorter attention spans and demand for simpler, more personal experiences. As Meeker points out TVs, tablets, PCs, and smartphones are used for different activities at present, but lines will blur (for example, 84% of smartphones owners use their device while watching TV). Day-to-day activities are being re-imagining through simple, beautiful user experiences. It seems like every day I discover a new way a brand/site/app made the most mundane or mounting task enjoyable and frictionless – and I’m not alone. Meeker points out the evolution of how we do everything from how we communicate, get information, use money, meet someone, get places, order a meal, and consume media is all done through new user interfaces that make day-to-day tasks simpler. This movement has caused just about everyone’s patience for a poor UX to take a nosedive. And it’s not just the digital user experience, technology is making a lot of people’s offline lives easier, and less expensive. Today 47% of online shopping utilizes free shipping— nearly half. And Meeker predicts same day local delivery will be the “next big thing” (and you can take a guess on who will own that). Content, Community and Commerce creates the “Internet Trifecta.” Meeker pointed out that when content, communities and commerce occur in a single experience it’s embraced by consumers, which translates to big dollars for brands. The magic happens when consumers can get inspired, research, and buy in a single experience. As the buying cycle has changed and touchpoints (Web, mobile, social, store) are no longer tied to “roles” or steps in the customer journey, brands must make all experiences (content and commerce) available in a single, adaptable experience. (We at Oracle Commerce have a lot to say on this topic – stay tuned!) And in what Meeker calls the “biggest re-imagination of all:” consumers enabled with smartphones and sensors are creating troves of findable and sharable data, which she says is in the early stages, by growing rapidly. She notes that transparency and patterns of consumers with this hardware (FYI - there are up to 10 sensors embedded in smartphones now) has created a Big Data treasure chest to be mined to improve business and the life of the consumer. The opportunities are endless. So what does it all mean for a company doing business online? Start thinking about how you can: Re-imagine your experience. Not your online experience and your mobile experience and your social experience – your overall experience. When consumers can research, buy, and advocate from anywhere (and their attention spans are at an all-time low) channels don’t exist. Enable simple and beautiful interactions informed by all of the online and offline data you leverage across your enterprise. Ethically leverage the endless supply of data (user generated content, clicks, purchases, in-store behavior, social activity) to make experiences more beautiful, more accurate, and more personalized (not to mention, more lucrative for you). Re-imagine content and commerce. Content and commerce must co-exist in a single destination where shoppers can get inspired, explore, research, share, and purchase in a collective experience. Think of how you can deliver an experience where all types of experiences (brand stories and commerce) adapt to every customer need. (Look for more on this topic coming soon). Re-imagine your reach. Look to Meeker’s findings to see how the global appetite for digital experiences is growing, but under-served in many places (i.e.: India, Mexico, Indonesia, Brazil, Philippines, etc.). Growing your online business to a new geography doesn’t have to mean starting from scratch or having an entirely new team manage the new endeavor. Expand using what you’ve already built in a multisite framework, with global language support. And of course, make sure it’s optimized for mobile! Re-imagine the possible. After every Meeker report, I’m always left with the thought “we are just at the beginning.” Everyday there is more data, more possibilities, more online consumers, and more opportunities to use new latest technology to get closer to your customers and be more successful. There’s a lot going on in our Product Development and Product Innovations groups to automate innovation for our customers, so that they can continue to stay ahead of these trends, without disrupting their business. Check out a recent interview with our Innovations Team on some of these new possibilities. Staying on track despite the seemingly endless possibilities out there is the hard part. Prioritizing where you will focus based on your unique brand promise, customer and goals is what you do best. To learn how Oracle Commerce can help your business achieve your goals check out oracle.com/commerce. Check out Meeker’s entire report here.

Read the article

Session memory – who’s this guy named Max and what’s he doing with my memory?

- by extended_events

SQL Server MVP Jonathan Kehayias (blog) emailed me a question last week when he noticed that the total memory used by the buffers for an event session was larger than the value he specified for the MAX_MEMORY option in the CREATE EVENT SESSION DDL. The answer here seems like an excellent subject for me to kick-off my new “401 – Internals” tag that identifies posts where I pull back the curtains a bit and let you peek into what’s going on inside the extended events engine. In a previous post (Option Trading: Getting the most out of the event session options) I explained that we use a set of buffers to store the event data before we write the event data to asynchronous targets. The MAX_MEMORY along with the MEMORY_PARTITION_MODE defines how big each buffer will be. Theoretically, that means that I can predict the size of each buffer using the following formula: max memory / # of buffers = buffer size If it was that simple I wouldn’t be writing this post. I’ll take “boundary” for 64K Alex For a number of reasons that are beyond the scope of this blog, we create event buffers in 64K chunks. The result of this is that the buffer size indicated by the formula above is rounded up to the next 64K boundary and that is the size used to create the buffers. If you think visually, this means that the graph of your max_memory option compared to the actual buffer size that results will look like a set of stairs rather than a smooth line. You can see this behavior by looking at the output of dm_xe_sessions, specifically the fields related to the buffer sizes, over a range of different memory inputs: Note: This test was run on a 2 core machine using per_cpu partitioning which results in 5 buffers. (Seem my previous post referenced above for the math behind buffer count.) input_memory_kb total_regular_buffers regular_buffer_size total_buffer_size 637 5 130867 654335 638 5 130867 654335 639 5 130867 654335 640 5 196403 982015 641 5 196403 982015 642 5 196403 982015 This is just a segment of the results that shows one of the “jumps” between the buffer boundary at 639 KB and 640 KB. You can verify the size boundary by doing the math on the regular_buffer_size field, which is returned in bytes: 196403 – 130867 = 65536 bytes 65536 / 1024 = 64 KB The relationship between the input for max_memory and when the regular_buffer_size is going to jump from one 64K boundary to the next is going to change based on the number of buffers being created. The number of buffers is dependent on the partition mode you choose. If you choose any partition mode other than NONE, the number of buffers will depend on your hardware configuration. (Again, see the earlier post referenced above.) With the default partition mode of none, you always get three buffers, regardless of machine configuration, so I generated a “range table” for max_memory settings between 1 KB and 4096 KB as an example. start_memory_range_kb end_memory_range_kb total_regular_buffers regular_buffer_size total_buffer_size 1 191 NULL NULL NULL 192 383 3 130867 392601 384 575 3 196403 589209 576 767 3 261939 785817 768 959 3 327475 982425 960 1151 3 393011 1179033 1152 1343 3 458547 1375641 1344 1535 3 524083 1572249 1536 1727 3 589619 1768857 1728 1919 3 655155 1965465 1920 2111 3 720691 2162073 2112 2303 3 786227 2358681 2304 2495 3 851763 2555289 2496 2687 3 917299 2751897 2688 2879 3 982835 2948505 2880 3071 3 1048371 3145113 3072 3263 3 1113907 3341721 3264 3455 3 1179443 3538329 3456 3647 3 1244979 3734937 3648 3839 3 1310515 3931545 3840 4031 3 1376051 4128153 4032 4096 3 1441587 4324761 As you can see, there are 21 “steps” within this range and max_memory values below 192 KB fall below the 64K per buffer limit so they generate an error when you attempt to specify them. Max approximates True as memory approaches 64K The upshot of this is that the max_memory option does not imply a contract for the maximum memory that will be used for the session buffers (Those of you who read Take it to the Max (and beyond) know that max_memory is really only referring to the event session buffer memory.) but is more of an estimate of total buffer size to the nearest higher multiple of 64K times the number of buffers you have. The maximum delta between your initial max_memory setting and the true total buffer size occurs right after you break through a 64K boundary, for example if you set max_memory = 576 KB (see the green line in the table), your actual buffer size will be closer to 767 KB in a non-partitioned event session. You get “stepped up” for every 191 KB block of initial max_memory which isn’t likely to cause a problem for most machines. Things get more interesting when you consider a partitioned event session on a computer that has a large number of logical CPUs or NUMA nodes. Since each buffer gets “stepped up” when you break a boundary, the delta can get much larger because it’s multiplied by the number of buffers. For example, a machine with 64 logical CPUs will have 160 buffers using per_cpu partitioning or if you have 8 NUMA nodes configured on that machine you would have 24 buffers when using per_node. If you’ve just broken through a 64K boundary and get “stepped up” to the next buffer size you’ll end up with total buffer size approximately 10240 KB and 1536 KB respectively (64K * # of buffers) larger than max_memory value you might think you’re getting. Using per_cpu partitioning on large machine has the most impact because of the large number of buffers created. If the amount of memory being used by your system within these ranges is important to you then this is something worth paying attention to and considering when you configure your event sessions. The DMV dm_xe_sessions is the tool to use to identify the exact buffer size for your sessions. In addition to the regular buffers (read: event session buffers) you’ll also see the details for large buffers if you have configured MAX_EVENT_SIZE. The “buffer steps” for any given hardware configuration should be static within each partition mode so if you want to have a handy reference available when you configure your event sessions you can use the following code to generate a range table similar to the one above that is applicable for your specific machine and chosen partition mode. DECLARE @buf_size_output table (input_memory_kb bigint, total_regular_buffers bigint, regular_buffer_size bigint, total_buffer_size bigint) DECLARE @buf_size int, @part_mode varchar(8) SET @buf_size = 1 -- Set to the begining of your max_memory range (KB) SET @part_mode = 'per_cpu' -- Set to the partition mode for the table you want to generate WHILE @buf_size <= 4096 -- Set to the end of your max_memory range (KB) BEGIN BEGIN TRY IF EXISTS (SELECT * from sys.server_event_sessions WHERE name = 'buffer_size_test') DROP EVENT SESSION buffer_size_test ON SERVER DECLARE @session nvarchar(max) SET @session = 'create event session buffer_size_test on server add event sql_statement_completed add target ring_buffer with (max_memory = ' + CAST(@buf_size as nvarchar(4)) + ' KB, memory_partition_mode = ' + @part_mode + ')' EXEC sp_executesql @session SET @session = 'alter event session buffer_size_test on server state = start' EXEC sp_executesql @session INSERT @buf_size_output (input_memory_kb, total_regular_buffers, regular_buffer_size, total_buffer_size) SELECT @buf_size, total_regular_buffers, regular_buffer_size, total_buffer_size FROM sys.dm_xe_sessions WHERE name = 'buffer_size_test' END TRY BEGIN CATCH INSERT @buf_size_output (input_memory_kb) SELECT @buf_size END CATCH SET @buf_size = @buf_size + 1 END DROP EVENT SESSION buffer_size_test ON SERVER SELECT MIN(input_memory_kb) start_memory_range_kb, MAX(input_memory_kb) end_memory_range_kb, total_regular_buffers, regular_buffer_size, total_buffer_size from @buf_size_output group by total_regular_buffers, regular_buffer_size, total_buffer_size Thanks to Jonathan for an interesting question and a chance to explore some of the details of Extended Event internals. - Mike

Read the article

ODI 12c - Parallel Table Load

- by David Allan

In this post we will look at the ODI 12c capability of parallel table load from the aspect of the mapping developer and the knowledge module developer - two quite different viewpoints. This is about parallel table loading which isn't to be confused with loading multiple targets per se. It supports the ability for ODI mappings to be executed concurrently especially if there is an overlap of the datastores that they access, so any temporary resources created may be uniquely constructed by ODI. Temporary objects can be anything basically - common examples are staging tables, indexes, views, directories - anything in the ETL to help the data integration flow do its job. In ODI 11g users found a few workarounds (such as changing the technology prefixes - see here) to build unique temporary names but it was more of a challenge in error cases. ODI 12c mappings by default operate exactly as they did in ODI 11g with respect to these temporary names (this is also true for upgraded interfaces and scenarios) but can be configured to support the uniqueness capabilities. We will look at this feature from two aspects; that of a mapping developer and that of a developer (of procedures or KMs). 1. Firstly as a Mapping Developer..... 1.1 Control when uniqueness is enabled A new property is available to set unique name generation on/off. When unique names have been enabled for a mapping, all temporary names used by the collection and integration objects will be generated using unique names. This property is presented as a check-box in the Property Inspector for a deployment specification. 1.2 Handle cleanup after successful execution Provided that all temporary objects that are created have a corresponding drop statement then all of the temporary objects should be removed during a successful execution. This should be the case with the KMs developed by Oracle. 1.3 Handle cleanup after unsuccessful execution If an execution failed in ODI 11g then temporary tables would have been left around and cleaned up in the subsequent run. In ODI 12c, KM tasks can now have a cleanup-type task which is executed even after a failure in the main tasks. These cleanup tasks will be executed even on failure if the property 'Remove Temporary Objects on Error' is set. If the agent was to crash and not be able to execute this task, then there is an ODI tool (OdiRemoveTemporaryObjects here) you can invoke to cleanup the tables - it supports date ranges and the like. That's all there is to it from the aspect of the mapping developer it's much, much simpler and straightforward. You can now execute the same mapping concurrently or execute many mappings using the same resource concurrently without worrying about conflict. 2. Secondly as a Procedure or KM Developer..... In the ODI Operator the executed code shows the actual name that is generated - you can also see the runtime code prior to execution (introduced in 11.1.1.7), for example below in the code type I selected 'Pre-executed Code' this lets you see the code about to be processed and you can also see the executed code (which is the default view). References to the collection (C$) and integration (I$) names will be automatically made unique by using the odiRef APIs - these objects will have unique names whenever concurrency has been enabled for a particular mapping deployment specification. It's also possible to use name uniqueness functions in procedures and your own KMs. 2.1 New uniqueness tags You can also make your own temporary objects have unique names by explicitly including either %UNIQUE_STEP_TAG or %UNIQUE_SESSION_TAG in the name passed to calls to the odiRef APIs. Such names would always include the unique tag regardless of the concurrency setting. To illustrate, let's look at the getObjectName() method. At <% expansion time, this API will append %UNIQUE_STEP_TAG to the object name for collection and integration tables. The name parameter passed to this API may contain %UNIQUE_STEP_TAG or %UNIQUE_SESSION_TAG. This API always generates to the <? version of getObjectName() At execution time this API will replace the unique tag macros with a string that is unique to the current execution scope. The returned name will conform to the name-length restriction for the target technology, and its pattern for the unique tag. Any necessary truncation will be performed against the initial name for the object and any other fixed text that may have been specified. Examples are:- <?=odiRef.getObjectName("L", "%COL_PRFEMP%UNIQUE_STEP_TAG", "D")?> SCOTT.C$_EABH7QI1BR1EQI3M76PG9SIMBQQ <?=odiRef.getObjectName("L", "EMP%UNIQUE_STEP_TAG_AE", "D")?> SCOTT.EMPAO96Q2JEKO0FTHQP77TMSAIOSR_ Methods which have this kind of support include getFrom, getTableName, getTable, getObjectShortName and getTemporaryIndex. There are APIs for retrieving this tag info also, the getInfo API has been extended with the following properties (the UNIQUE* properties can also be used in ODI procedures); UNIQUE_STEP_TAG - Returns the unique value for the current step scope, e.g. 5rvmd8hOIy7OU2o1FhsF61 Note that this will be a different value for each loop-iteration when the step is in a loop. UNIQUE_SESSION_TAG - Returns the unique value for the current session scope, e.g. 6N38vXLrgjwUwT5MseHHY9 IS_CONCURRENT - Returns info about the current mapping, will return 0 or 1 (only in % phase) GUID_SRC_SET - Returns the UUID for the current source set/execution unit (only in % phase) The getPop API has been extended with the IS_CONCURRENT property which returns info about an mapping, will return 0 or 1. 2.2 Additional APIs Some new APIs are provided including getFormattedName which will allow KM developers to construct a name from fixed-text or ODI symbols that can be optionally truncate to a max length and use a specific encoding for the unique tag. It has syntax getFormattedName(String pName[, String pTechnologyCode]) This API is available at both the % and the ? phase. The format string can contain the ODI prefixes that are available for getObjectName(), e.g. %INT_PRF, %COL_PRF, %ERR_PRF, %IDX_PRF alongwith %UNIQUE_STEP_TAG or %UNIQUE_SESSION_TAG. The latter tags will be expanded into a unique string according to the specified technology. Calls to this API within the same execution context are guaranteed to return the same unique name provided that the same parameters are passed to the call. e.g. <%=odiRef.getFormattedName("%COL_PRFMY_TABLE%UNIQUE_STEP_TAG_AE", "ORACLE")%> <?=odiRef.getFormattedName("%COL_PRFMY_TABLE%UNIQUE_STEP_TAG_AE", "ORACLE")?> C$_MY_TAB7wDiBe80vBog1auacS1xB_AE <?=odiRef.getFormattedName("%COL_PRFMY_TABLE%UNIQUE_STEP_TAG.log", "FILE")?> C2_MY_TAB7wDiBe80vBog1auacS1xB.log 2.3 Name length generation As part of name generation, the length of the generated name will be compared with the maximum length for the target technology and truncation may need to be applied. When a unique tag is included in the generated string it is important that uniqueness is not compromised by truncation of the unique tag. When a unique tag is NOT part of the generated name, the name will be truncated by removing characters from the end - this is the existing 11g algorithm. When a unique tag is included, the algorithm will first truncate the <postfix> and if necessary the <prefix>. It is recommended that users will ensure there is sufficient uniqueness in the <prefix> section to ensure uniqueness of the final resultant name. SUMMARY To summarize, ODI 12c make it much simpler to utilize mappings in concurrent cases and provides APIs for helping developing any procedures or custom knowledge modules in such a way they can be used in highly concurrent, parallel scenarios.

Read the article

SQL SERVER – Extending SQL Azure with Azure worker role – Guest Post by Paras Doshi

- by pinaldave

This is guest post by Paras Doshi. Paras Doshi is a research Intern at SolidQ.com and a Microsoft student partner. He is currently working in the domain of SQL Azure. SQL Azure is nothing but a SQL server in the cloud. SQL Azure provides benefits such as on demand rapid provisioning, cost-effective scalability, high availability and reduced management overhead. To see an introduction on SQL Azure, check out the post by Pinal here In this article, we are going to discuss how to extend SQL Azure with the Azure worker role. In other words, we will attempt to write a custom code and host it in the Azure worker role; the aim is to add some features that are not available with SQL Azure currently or features that need to be customized for flexibility. This way we extend the SQL Azure capability by building some solutions that run on Azure as worker roles. To understand Azure worker role, think of it as a windows service in cloud. Azure worker role can perform background processes, and to handle processes such as synchronization and backup, it becomes our ideal tool. First, we will focus on writing a worker role code that synchronizes SQL Azure databases. Before we do so, let’s see some scenarios in which synchronization between SQL Azure databases is beneficial: scaling out access over multiple databases enables us to handle workload efficiently As of now, SQL Azure database can be hosted in one of any six datacenters. By synchronizing databases located in different data centers, one can extend the data by enabling access to geographically distributed data Let us see some scenarios in which SQL server to SQL Azure database synchronization is beneficial To backup SQL Azure database on local infrastructure Rather than investing in local infrastructure for increased workloads, such workloads could be handled by cloud Ability to extend data to different datacenters located across the world to enable efficient data access from remote locations Now, let us develop cloud-based app that synchronizes SQL Azure databases. For an Introduction to developing cloud based apps, click here Now, in this article, I aim to provide a bird’s eye view of how a code that synchronizes SQL Azure databases look like and then list resources that can help you develop the solution from scratch. Now, if you newly add a worker role to the cloud-based project, this is how the code will look like. (Note: I have added comments to the skeleton code to point out the modifications that will be required in the code to carry out the SQL Azure synchronization. Note the placement of Setup() and Sync() function.) Click here (http://parasdoshi1989.files.wordpress.com/2011/06/code-snippet-1-for-extending-sql-azure-with-azure-worker-role1.pdf ) Enabling SQL Azure databases synchronization through sync framework is a two-step process. In the first step, the database is provisioned and sync framework creates tracking tables, stored procedures, triggers, and tables to store metadata to enable synchronization. This is one time step. The code for the same is put in the setup() function which is called once when the worker role starts. Now, the second step is continuous (or on demand) synchronization of SQL Azure databases by propagating changes between databases. This is done on a continuous basis by calling the sync() function in the while loop. The code logic to synchronize changes between SQL Azure databases should be put in the sync() function. Discussing the coding part step by step is out of the scope of this article. Therefore, let me suggest you a resource, which is given here. Also, note that before you start developing the code, you will need to install SYNC framework 2.1 SDK (download here). Further, you will reference some libraries before you start coding. Details regarding the same are available in the article that I just pointed to. You will be charged for data transfers if the databases are not in the same datacenter. For pricing information, go here Currently, a tool named DATA SYNC, which is built on top of sync framework, is available in CTP that allows SQL Azure <-> SQL server and SQL Azure <-> SQL Azure synchronization (without writing single line of code); however, in some cases, the custom code shown in this blogpost provides flexibility that is not available with Data SYNC. For instance, filtering is not supported in the SQL Azure DATA SYNC CTP2; if you wish to have such a functionality now, then you have the option of developing a custom code using SYNC Framework. Now, this code can be easily extended to synchronize at some schedule. Let us say we want the databases to get synchronized every day at 10:00 pm. This is what the code will look like now: (http://parasdoshi1989.files.wordpress.com/2011/06/code-snippet-2-for-extending-sql-azure-with-azure-worker-role.pdf) Don’t you think that by writing such a code, we are imitating the functionality provided by the SQL server agent for a SQL server? Think about it. We are scheduling our administrative task by writing custom code – in other words, we have developed a “Light weight SQL server agent for SQL Azure!” Since the SQL server agent is not currently available in cloud, we have developed a solution that enables us to schedule tasks, and thus we have extended SQL Azure with the Azure worker role! Now if you wish to track jobs, you can do so by storing this data in SQL Azure (or Azure tables). The reason is that Windows Azure is a stateless platform, and we will need to store the state of the job ourselves and the choice that you have is SQL Azure or Azure tables. Note that this solution requires custom code and also it is not UI driven; however, for now, it can act as a temporary solution until SQL server agent is made available in the cloud. Moreover, this solution does not encompass functionalities that a SQL server agent provides, but it does open up an interesting avenue to schedule some of the tasks such as backup and synchronization of SQL Azure databases by writing some custom code in the Azure worker role. Now, let us see one more possibility – i.e., running BCP through a worker role in Azure-hosted services and then uploading the backup files either locally or on blobs. If you upload it locally, then consider the data transfer cost. If you upload it to blobs residing in the same datacenter, then no transfer cost applies but the cost on blob size applies. So, before choosing the option, you need to evaluate your preferences keeping the cost associated with each option in mind. In this article, I have shown that Azure worker role solution could be developed to synchronize SQL Azure databases. Moreover, a light-weight SQL server agent for SQL Azure can be developed. Also we discussed the possibility of running BCP through a worker role in Azure-hosted services for backing up our precious SQL Azure data. Thus, we can extend SQL Azure with the Azure worker role. But remember: you will be charged for running Azure worker roles. So at the end of the day, you need to ask – am I willing to build a custom code and pay money to achieve this functionality? I hope you found this blog post interesting. If you have any questions/feedback, you can comment below or you can mail me at Paras[at]student-partners[dot]com Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Azure, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Best of Breed vs. Suite – Oracle’s SaaS Delivers Both

- by yaldahhakim

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} The debate of which is better: “best of breed” business applications vs. an integrated suite is certainly not a new conversation. This has been argued between IT vendors and CIOs for years. It’s also important to clarify that “best of breed” does not necessarily translate into being the richest functionality; rather it’s often about just having the best fit solution to solve a specific business problem or need. So what does cloud have to do with the niche vs. suite debate? Consuming business applications in a cloud or SaaS deployment model can change the best of breed vs. suite discussion - if the cloud is done right. It’s having your cake and eating it too only better: you don’t have to gather all the ingredients or wait to bake your cake, and you can adjust how big of slice you take. Before you eat, it’s worth pausing to recall much of what we learned about IT over the last decade. These basic IT principles still hold true even though the financial model has changed from buying to renting. In other words, what’s under the technology hood still matters. Architecture and development methodologies like building an application based on open standards so it works with other systems - is still important. Data and information silos, complex integrations, and proprietary technologies that lock you in, are still bad. While some may argue that IT no longer matters with cloud, the opposite is actually true. If anything cloud can help return IT back to its rightful place as key strategic asset vs. a liability on the balance sheet. The “I” in CIO was never meant to stand for “integration” yet it’s amazing how much time and money is poured into these types of initiatives for most organizations each year. Rather the “I” needs to stand for “innovation”. This is where Oracle SaaS can uniquely help. Oracle’s application strategy has not really changed over the years. It’s always been about bringing the best and richest functionality across the enterprise to our customers while leveraging a common, standards-based, and enterprise-grade platform. So not jut best fit, but the best capabilities based on the input of thousands of enterprise customers across the globe. Oracle invests billions in R&D every year to add new capabilities to the broadest cloud portfolio in the industry, spanning across functional pillars like CRM, HCM, ERP, etc. And where it makes sense, Oracle combines key strategic acquisitions to complement organic functionality. The result is best of breed delivered in a suite. Again this is not something new. The game changer now with cloud is that it impacts HOW Oracle customers adopt the richest, most modern applications across the business – and continue on getting it. Consuming oracle applications in the cloud means you can adopt new capabilities and updates very quickly and easily. There’s no hardware to buy or software to manage. Oracle does it for you. Low upfront costs and an OpEx financial model is the easy part. Oracle Cloud Applications take it a big step further. For organizations that demand having the latest and richest functionality and accelerating the time to value from their IT investment, Oracle Cloud is the right path. It’s about holistically changing the “hows” and the “whys” of the organization by leveraging transformational innovations like social, mobile, and big data in a consistent and more powerful way. Not just about sales force automation or talent management. These technologies should impact all parts of the company and Oracle Cloud is the enterprise-grade delivery vehicle. Oracle SaaS helps break down barriers of adoption and is eases the headache of upgrades, investing in new supporting hardware, or adding internal expertise to manage it all. With Oracle Cloud, customers can get best of breed capabilities in either a full suite model or a la carte. And because it’s entirely built on open standards, it’s built to co-exist with existing IT investments. Updates can be automatic or delayed based on a customer’s requirements. And it’s complete – a full suite of cross pillar functionality. Even better, if you don’t like it, need more or less, just turn the dial up or down. Just like your utility bill, you pay for what you use, and can consume more or less power whenever you need it. Lower cost, lower investment risk, without compromising on functionality, security, or performance. Technology still matters in the cloud. So our cloud customers also like that when they adopt our cloud applications, they also get the best underlying technology, from the middleware and database platform down to infrastructure and Oracle’s engineered systems. Therefore it’s not just the greatest and latest in application functionality, but everything underneath that makes it work is also the latest and greatest. The best of breed technology stack powering best of breed business applications, and all delivered in a subscription based model. The best of both worlds. Yep, that’s the idea.

Read the article

Why It Is So Important to Know Your Customer

- by Christie Flanagan

Over the years, I endured enough delayed flights, air turbulence and misadventures in airport security clearance to watch my expectations for the air travel experience fall to abysmally low levels. The extent of my loyalty to any one carrier had more to do with the proximity of the airport parking garage to their particular gate than to any effort on the airline’s part to actually earn and retain my business. That all changed one day when I found myself at the airport hoping to catch a return flight home a few hours earlier than expected, using an airline I had flown with for the first time just that week. When you travel regularly for business, being able to catch a return flight home that’s even an hour or two earlier than originally scheduled is a big deal. It can mean the difference between having a normal evening with your family and having to sneak in like a cat burglar after everyone is fast asleep. And so I found myself on this particular day hoping to catch an earlier flight home. I approached the gate agent and was told that I could go on standby for their next flight out. Then I asked how much it was going to cost to change the flight, knowing full well that I wouldn’t get reimbursed by my company for any change fees. “Oh, there’s no charge to fly on standby,” the gate agent told me. I made a funny look. I couldn’t believe what I was hearing. This airline was going to let my fly on standby, at no additional charge, even though I was a new customer with no status or points. It had been years since I’d seen an airline pass up a short term revenue generating opportunity in favor of a long term loyalty generating one. At that moment, this particular airline gained my loyal business. Since then, this airline has had the opportunity to learn a lot about me. They know where I live, where I fly from, where I usually fly to, and where I like to sit on the plane. In general, I’ve found their customer service to be quite good whether at the airport, via call center and even through social channels. They email me occasionally, and when they do, they demonstrate that they know me by promoting deals for flights from where I live to places that I’d be interested in visiting. And that’s part of why I’m always so puzzled when I visit their website.Does this company with the great service, customer friendly policies, and clean planes demonstrate that they know me at all when I visit their website? The answer is no. Even when I log in using my loyalty program credentials, it’s pretty obvious that they’re presenting the same old home page and same old offers to every single one of their site visitors. I mean, those promotional offers that they’re featuring so prominently -- they’re for flights that originate thousands of miles from where I live! There’s no way I’d ever book one of those flights and I’m sure I’m not the only one of their customers to feel that way.My reason for recounting this story is not to pick on the one customer experience flaw I've noticed with this particular airline, in fact, they do so many things right that I’ll continue to fly with them. But I did want to illustrate just how glaringly obvious it is to customers today when a touch point they have with a brand is impersonal, unconnected and out of sync. As someone who’s spent a number of years in the web experience management and online marketing space, it particularly peeves me when that out of sync touch point is a brand’s website, perhaps because I know how important it is to make a customer’s online experience relevant and how many powerful tools are available for making a relevant experience a reality. The fact is, delivering a one-size-fits-all online customer experience is no longer acceptable or particularly effective in today’s world. Today’s savvy customers expect you to know who they are and to understand their preferences, behavior and relationship with your brand. Not only do they expect you to know about them, but they also expect you to demonstrate this knowledge across all of their touch points with your brand in a consistent and compelling fashion, whether it be on your traditional website, your mobile web presence or through various social channels.Delivering the kind of personalized online experiences that customers want can have tremendous business benefits. This is not just about generating feelings of goodwill and higher customer satisfaction ratings either. More relevant and personalized online experiences boost the effectiveness of online marketing initiatives and the statistics prove this out. Personalized web experiences can help increase online conversion rates by 70% -- that’s a huge number.1 And more than three quarters of consumers indicate that they’ve made additional online purchases based on personalized product recommendations.2Now if only this airline would get on board with delivering a more personalized online customer experience. I’d certainly be happier and more likely to spring for one of their promotional offers. And by targeting relevant offers on their home page to appropriate segments of their site visitors, I bet they’d be happier and generating additional revenue too. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} ***** If you're interested in hearing more perspectives on the benefits of demonstrating that you know your customers by delivering a more personalized experience, check out this white paper on creating a successful and meaningful customer experience on the web. Also catch the video below on the business value of CX in attracting new customers featuring Oracle's VP of Customer Experience Strategy, Brian Curran. 1 Search Engine Watch 2 Marketing Charts

Read the article

How to launch LOV and Date dialogs using the keyboard

- by frank.nimphius

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Using the ADF Faces JavaScript API, developers can listen for user keyboard input in input components to filter or respond to specific characters or key combination. The JavaScript shown below can be used with an af:clientListener tag on af:inputListOfValues or af:inputDate. At runtime, the JavaScript code determines the component type it is executed on and either opens the LOV dialog or the input Date popup. <af:resource type="javascript"> /** * function to launch dialog if cursor is in LOV or * input date field * @param evt argument to capture the AdfUIInputEvent object */ function launchPopUpUsingF8(evt) { var component = evt.getSource(); if (evt.getKeyCode() == AdfKeyStroke.F8_KEY) { //check for input LOV component if (component.getTypeName() == 'AdfRichInputListOfValues') { AdfLaunchPopupEvent.queue(component, true); //event is handled on the client. Server does not need //to be notified evt.cancel(); } //check for input Date component else if (component.getTypeName() == 'AdfRichInputDate') { //the inputDate af:popup component ID always is ::pop var popupClientId = component.getAbsoluteLocator() + '::pop'; var popup = component.findComponent(popupClientId); var hints = {align : AdfRichPopup.ALIGN_END_AFTER, alignId : component.getAbsoluteLocator()}; popup.show(hints); //event is handled on the client. Server does not need //to be notified evt.cancel(); } } } </af:resource> The af:clientListener that calls the JavaScript is added as shown below. <af:inputDate label="Label 1" id="id1"> <af:clientListener method="launchPopUpUsingF8" type="keyDown"/> </af:inputDate> As you may have noticed, the call to open the popup is different for the af:inputListOfValues and the af:inputDate. For the list of values component, an ADF Faces AdfLaunchPopupEvent is queued with the LOV component passed s an argument. Launching the input date popup is a bit more complicate and requires you to lookup the implicit popup dialog and to open it manually. Because the popup is opened manually using the show() method on the af:popup component, the alignment of the dialog also needs to be handled manually. For this, the popup component specifies alignment hints, that for the ALIGN_END_AFTER hint aligns the dialog at the end and below the date component. The align Id hint specifies the component the dialog is relatively positioned to, which of course should be the input date field. The ADF Faces JavaScript API and how to use it is further explained in the Using JavaScript in ADF Faces Rich Client Applications whitepaper available from the Oracle Technology Network (OTN) http://www.oracle.com/technetwork/developer-tools/jdev/1-2011-javascript-302460.pdf An ADF Insider recording about JavaScript in ADF Faces can be watched from here http://download.oracle.com/otn_hosted_doc/jdeveloper/11gdemos/adf-insider-javascript/adf-insider-javascript.html

Read the article

Thank You for a Great Welcome for Oracle GoldenGate 11g Release 2

- by Irem Radzik

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Yesterday morning we had two launch webcasts for Oracle GoldenGate 11g Release 2. I had the pleasure to present, as well as moderate the Q&A panels in both of these webcasts. Both events had hundreds of live attendees, sending us over 150 questions. Even though we left 30 minutes for Q&A, it was not nearly enough time to address for all the insightful questions our audience sent. Our product management team and I really appreciate the interaction we had yesterday and we are starting to respond back with outstanding questions today. Oracle GoldenGate’s new release launch also had great welcome from the media. You can find the links for various articles on the new release below: ITBusinessEdge Oracle Embraces Cross-Platform Data Integration Information Week: Oracle Real-Time Advance Taps Compressed Data Integration Developer News, Oracle GoldenGate Adds Deeper Oracle Integration, Extends Real-Time Performance CIO, Oracle GoldenGate Buddies Up with Sibling Software DBTA, Real-Time Data Integration: Oracle GoldenGate 11g Release 2 Now Available CBR Oracle unveils GoldenGate 11g Release 2 real-time data integration application In this blog, I want to address some of the frequently asked questions that came up during the webcasts. You can find the top questions and their answers along with related resources below. We will continue to address frequently asked questions via future blogs. Q: Will the new Integrated Capture for Oracle Database replace the Classic Capture? If not, which one do I use when? A: No, Classic Capture will be around for long time. Core platform specific features, bug fixes, and patches will be available for both Capture processes.Oracle Database specific features will be only available in the Integrated Capture. The Integrated Capture for Oracle Database is an option for users that need to capture data from compressed tables or need support for XML data types, XA on RAC. Users who don’t leverage these features should continue to use our Classic Capture. For more information on Oracle GoldenGate 11g Release 2 I recommend to check out the White paper: Oracle GoldenGate 11gR2 New Features as well as other technical white papers we have on OTN. For those of you coming to OpenWorld, please attend the related session: Extracting Data in Oracle GoldenGate Integrated Capture Mode, Monday Oct 1st 1:45pm Moscone South – 102 to learn more about this new feature. Q: What is new in Conflict Detection and Resolution? And how does it work? A: There are now pre-built functions to identify the conditions under which an error occurs and how to handle the record when the condition occurs. Error conditions handled include inserts into a target table where the row already exists, updates or deletes to target table rows that exist, but the original source data (before columns) do not match the existing data in the target row, and updates or deletes where the row does not exist in the target database table.Foreach of these conditions a method to handle the error is specified. Please check out our recent blog on this topic and the White paper: Oracle GoldenGate 11gR2 New Features white paper. Also, for those attending OpenWorld please attend the session: Best Practices for Conflict Detection and Resolution in Oracle GoldenGate for Active/Active- Wednesday Oct 3rd 3:30pm Mascone 3000 Q: Does Oracle GoldenGate Veridata and the Management Pack require additional licenses, or is it incorporated with the GoldenGate license? A: Oracle GoldenGate Veridata and Oracle Management Pack for Oracle GoldenGate are additional products and require separate licenses. Please check out Oracle's price list here. Q: Does GoldenGate - Oracle Enterprise Manager Plug-in require additional license? A: Oracle Enterprise Manager Plug-in is included in the Oracle Management Pack for Oracle GoldenGate license, which is separate from Oracle GoldenGate license. There is no separate license for the Enterprise Manager Plug-in by itself. Oracle GoldenGate Monitor, Oracle GoldenGate Director, and Enterprise Manager Plug-in are included in the Management Pack for Oracle GoldenGate license. Please check out Management Pack for Oracle GoldenGate data sheet for more info on this product bundle. Q: Is Oracle GoldenGate replacing Oracle Streams product? A: Oracle GoldenGate is the strategic data replication product. Therefore, Oracle Streams will continue to be supported, but will not be actively enhanced. Rather, the best elements of Oracle Streams will be added to Oracle GoldenGate. Conflict management is one of them and with the latest release Oracle GoldenGate has a more advanced conflict management offering. Current customers depending on Oracle Streams will continue to be fully supported. Q: How is Oracle GoldenGate different than Oracle Data Integrator? A: Oracle Data Integrator is designed for fast bulk data movement and transformation between heterogeneous systems, while GoldenGate is designed for real-time movement of transactions between heterogeneous systems. These two products are completely complementary where GoldenGate provides low-impact real-time change data capture and delivery to a staging area on the target. And Oracle Data Integrator transforms this data and loads the DW tables. In fact, Oracle Data Integrator integrates with GoldenGate to use GoldenGate’s Capture process as one option for its CDC mechanism. We have several customers that deployed GoldenGate and ODI together to feed real-time data to their data warehousing solutions. Please also check out Oracle Data Integrator Changed Data Capture with Oracle GoldenGate Data Sheet (PDF). Thank you again very much for welcoming Oracle GoldenGate 11g Release 2 and stay in touch with us for more exciting news, updates, and events.

Read the article

MySQL Cluster 7.2: Over 8x Higher Performance than Cluster 7.1

- by Mat Keep

0 0 1 893 5092 Homework 42 11 5974 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin; mso-ansi-language:EN-US;} Summary The scalability enhancements delivered by extensions to multi-threaded data nodes enables MySQL Cluster 7.2 to deliver over 8x higher performance than the previous MySQL Cluster 7.1 release on a recent benchmark What’s New in MySQL Cluster 7.2 MySQL Cluster 7.2 was released as GA (Generally Available) in February 2012, delivering many enhancements to performance on complex queries, new NoSQL Key / Value API, cross-data center replication and ease-of-use. These enhancements are summarized in the Figure below, and detailed in the MySQL Cluster New Features whitepaper Figure 1: Next Generation Web Services, Cross Data Center Replication and Ease-of-Use Once of the key enhancements delivered in MySQL Cluster 7.2 is extensions made to the multi-threading processes of the data nodes. Multi-Threaded Data Node Extensions The MySQL Cluster 7.2 data node is now functionally divided into seven thread types: 1) Local Data Manager threads (ldm). Note – these are sometimes also called LQH threads. 2) Transaction Coordinator threads (tc) 3) Asynchronous Replication threads (rep) 4) Schema Management threads (main) 5) Network receiver threads (recv) 6) Network send threads (send) 7) IO threads Each of these thread types are discussed in more detail below. MySQL Cluster 7.2 increases the maximum number of LDM threads from 4 to 16. The LDM contains the actual data, which means that when using 16 threads the data is more heavily partitioned (this is automatic in MySQL Cluster). Each LDM thread maintains its own set of data partitions, index partitions and REDO log. The number of LDM partitions per data node is not dynamically configurable, but it is possible, however, to map more than one partition onto each LDM thread, providing flexibility in modifying the number of LDM threads. The TC domain stores the state of in-flight transactions. This means that every new transaction can easily be assigned to a new TC thread. Testing has shown that in most cases 1 TC thread per 2 LDM threads is sufficient, and in many cases even 1 TC thread per 4 LDM threads is also acceptable. Testing also demonstrated that in some instances where the workload needed to sustain very high update loads it is necessary to configure 3 to 4 TC threads per 4 LDM threads. In the previous MySQL Cluster 7.1 release, only one TC thread was available. This limit has been increased to 16 TC threads in MySQL Cluster 7.2. The TC domain also manages the Adaptive Query Localization functionality introduced in MySQL Cluster 7.2 that significantly enhanced complex query performance by pushing JOIN operations down to the data nodes. Asynchronous Replication was separated into its own thread with the release of MySQL Cluster 7.1, and has not been modified in the latest 7.2 release. To scale the number of TC threads, it was necessary to separate the Schema Management domain from the TC domain. The schema management thread has little load, so is implemented with a single thread. The Network receiver domain was bound to 1 thread in MySQL Cluster 7.1. With the increase of threads in MySQL Cluster 7.2 it is also necessary to increase the number of recv threads to 8. This enables each receive thread to service one or more sockets used to communicate with other nodes the Cluster. The Network send thread is a new thread type introduced in MySQL Cluster 7.2. Previously other threads handled the sending operations themselves, which can provide for lower latency. To achieve highest throughput however, it has been necessary to create dedicated send threads, of which 8 can be configured. It is still possible to configure MySQL Cluster 7.2 to a legacy mode that does not use any of the send threads – useful for those workloads that are most sensitive to latency. The IO Thread is the final thread type and there have been no changes to this domain in MySQL Cluster 7.2. Multiple IO threads were already available, which could be configured to either one thread per open file, or to a fixed number of IO threads that handle the IO traffic. Except when using compression on disk, the IO threads typically have a very light load. Benchmarking the Scalability Enhancements The scalability enhancements discussed above have made it possible to scale CPU usage of each data node to more than 5x of that possible in MySQL Cluster 7.1. In addition, a number of bottlenecks have been removed, making it possible to scale data node performance by even more than 5x. Figure 2: MySQL Cluster 7.2 Delivers 8.4x Higher Performance than 7.1 The flexAsynch benchmark was used to compare MySQL Cluster 7.2 performance to 7.1 across an 8-node Intel Xeon x5670-based cluster of dual socket commodity servers (6 cores each). As the results demonstrate, MySQL Cluster 7.2 delivers over 8x higher performance per data nodes than MySQL Cluster 7.1. More details of this and other benchmarks will be published in a new whitepaper – coming soon, so stay tuned! In a following blog post, I’ll provide recommendations on optimum thread configurations for different types of server processor. You can also learn more from the Best Practices Guide to Optimizing Performance of MySQL Cluster Conclusion MySQL Cluster has achieved a range of impressive benchmark results, and set in context with the previous 7.1 release, is able to deliver over 8x higher performance per node. As a result, the multi-threaded data node extensions not only serve to increase performance of MySQL Cluster, they also enable users to achieve significantly improved levels of utilization from current and future generations of massively multi-core, multi-thread processor designs.

Read the article

MySQL Cluster 7.3 Labs Release – Foreign Keys Are In!

- by Mat Keep

0 0 1 1097 6254 Homework 52 14 7337 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin; mso-ansi-language:EN-US;} Summary (aka TL/DR): Support for Foreign Key constraints has been one of the most requested feature enhancements for MySQL Cluster. We are therefore extremely excited to announce that Foreign Keys are part of the first Labs Release of MySQL Cluster 7.3 – available for download, evaluation and feedback now! (Select the mysql-cluster-7.3-labs-June-2012 build) In this blog, I will attempt to discuss the design rationale, implementation, configuration and steps to get started in evaluating the first MySQL Cluster 7.3 Labs Release. Pace of Innovation It was only a couple of months ago that we announced the General Availability (GA) of MySQL Cluster 7.2, delivering 1 billion Queries per Minute, with 70x higher cross-shard JOIN performance, Memcached NoSQL key-value API and cross-data center replication. This release has been a huge hit, with downloads and deployments quickly reaching record levels. The announcement of the first MySQL Cluster 7.3 Early Access lab release at today's MySQL Innovation Day event demonstrates the continued pace in Cluster development, and provides an opportunity for the community to evaluate and feedback on new features they want to see. What’s the Plan for MySQL Cluster 7.3? Well, Foreign Keys, as you may have gathered by now (!), and this is the focus of this first Labs Release. As with MySQL Cluster 7.2, we plan to publish a series of preview releases for 7.3 that will incrementally add new candidate features for a final GA release (subject to usual safe harbor statement below*), including: - New NoSQL APIs; - Features to automate the configuration and provisioning of multi-node clusters, on premise or in the cloud; - Performance and scalability enhancements; - Taking advantage of features in the latest MySQL 5.x Server GA. Design Rationale MySQL Cluster is designed as a “Not-Only-SQL” database. It combines attributes that enable users to blend the best of both relational and NoSQL technologies into solutions that deliver web scalability with 99.999% availability and real-time performance, including: Concurrent NoSQL and SQL access to the database; Auto-sharding with simple scale-out across commodity hardware; Multi-master replication with failover and recovery both within and across data centers; Shared-nothing architecture with no single point of failure; Online scaling and schema changes; ACID compliance and support for complex queries, across shards. Native support for Foreign Key constraints enables users to extend the benefits of MySQL Cluster into a broader range of use-cases, including: - Packaged applications in areas such as eCommerce and Web Content Management that prescribe databases with Foreign Key support. - In-house developments benefiting from Foreign Key constraints to simplify data models and eliminate the additional application logic needed to maintain data consistency and integrity between tables. Implementation The Foreign Key functionality is implemented directly within MySQL Cluster’s data nodes, allowing any client API accessing the cluster to benefit from them – whether using SQL or one of the NoSQL interfaces (Memcached, C++, Java, JPA or HTTP/REST.) The core referential actions defined in the SQL:2003 standard are implemented: CASCADE RESTRICT NO ACTION SET NULL In addition, the MySQL Cluster implementation supports the online adding and dropping of Foreign Keys, ensuring the Cluster continues to serve both read and write requests during the operation. An important difference to note with the Foreign Key implementation in InnoDB is that MySQL Cluster does not support the updating of Primary Keys from within the Data Nodes themselves - instead the UPDATE is emulated with a DELETE followed by an INSERT operation. Therefore an UPDATE operation will return an error if the parent reference is using a Primary Key, unless using CASCADE action, in which case the delete operation will result in the corresponding rows in the child table being deleted. The Engineering team plans to change this behavior in a subsequent preview release. Also note that when using InnoDB "NO ACTION" is identical to "RESTRICT". In the case of MySQL Cluster “NO ACTION” means “deferred check”, i.e. the constraint is checked before commit, allowing user-defined triggers to automatically make changes in order to satisfy the Foreign Key constraints. Configuration There is nothing special you have to do here – Foreign Key constraint checking is enabled by default. If you intend to migrate existing tables from another database or storage engine, for example from InnoDB, there are a couple of best practices to observe: 1. Analyze the structure of the Foreign Key graph and run the ALTER TABLE ENGINE=NDB in the correct sequence to ensure constraints are enforced 2. Alternatively drop the Foreign Key constraints prior to the import process and then recreate when complete. Getting Started Read this blog for a demonstration of using Foreign Keys with MySQL Cluster. You can download MySQL Cluster 7.3 Labs Release with Foreign Keys today - (select the mysql-cluster-7.3-labs-June-2012 build) If you are new to MySQL Cluster, the Getting Started guide will walk you through installing an evaluation cluster on a singe host (these guides reflect MySQL Cluster 7.2, but apply equally well to 7.3) Post any questions to the MySQL Cluster forum where our Engineering team will attempt to assist you. Post any bugs you find to the MySQL bug tracking system (select MySQL Cluster from the Category drop-down menu) And if you have any feedback, please post them to the Comments section of this blog. Summary MySQL Cluster 7.2 is the GA, production-ready release of MySQL Cluster. This first Labs Release of MySQL Cluster 7.3 gives you the opportunity to preview and evaluate future developments in the MySQL Cluster database, and we are very excited to be able to share that with you. Let us know how you get along with MySQL Cluster 7.3, and other features that you want to see in future releases. * Safe Harbor Statement This information is intended to outline our general product direction. It is intended for information purposes only, and may not be incorporated into any contract. It is not a commitment to deliver any material, code, or functionality, and should not be relied upon in making purchasing decisions. The development, release, and timing of any features or functionality described for Oracle’s products remains at the sole discretion of Oracle.

Read the article

You Say You Want a (Customer Experience) Revolution

- by Christie Flanagan

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} rev-o-lu-tion [rev-uh-loo-shuhn] noun 1. a sudden, radical or complete change 2. fundamental change in the way of thinking about or visualizing something; a change of paradigm 3. a changeover in use or preference especially in technology <the computer revolution> Lately, I've been hearing an awful lot about the customer experience revolution. Tonight Oracle will be hosting The Experience Revolution, an evening of exploration and networking with customer experience executives in New York City where Oracle President Mark Hurd will introduce Oracle Customer Experience, a cross-stack suite of customer experience products that includes Oracle WebCenter and a number of other Oracle technologies. Then on Tuesday and Wednesday, the Forrester Customer Experience Forum East also kicks off in New York City where they'll examine how businesses can "reap the full business benefits of the customer experience revolution." So, are we in the midst of a customer experience revolution? As a consumer, I can answer that question with a definitive “yes.” When I bought my very first car, I had a lot of questions. How do I know if I’m paying a fair price? How do I know if this dealer is honest? Why do I have to sit through these good cop, bad cop shenanigans between sales and sales management at the dealership? Why do I feel like I’m doing these people a favor by giving them my business? In the end the whole experience left me feeling deeply unsatisfied. I didn’t feel that I held all that much power over the experience and the only real negotiating trick I had was to walk out, which I did, many times before actually making a purchase. Fast forward to a year ago and I found myself back in the market for a new car. The very first car that I bought had finally kicked the bucket after many years, many repair bills, and much wear and tear. Man, I had loved that car. It was time to move on, but I had a knot in my stomach when I reflected back on my last car purchase experience and dreaded the thought of going through that again. Could that have been the reason why I drove my old car for so long? But as I started the process of researching new cars, I started to feel really confident. I had a wealth of online information that helped me in my search. I went to Edmunds and plugged in some information on my preferences and left with a short list of vehicles. After an afternoon spent test driving the cars my short list, I had determined my favorite – it was a model I didn’t even know about until my research on Edmunds! But I didn’t want to go back to the dealership where I test drove it. They were clearly old school and wanted me to buy the way that they wanted to sell. No thanks! After that I went back online. I figured out exactly what people had paid for this car in my area. I found out what kind of discount others were able to negotiate from an online community forum dedicated to the make and model. I found out how the sales people were being incentivized by the manufacturer that month. I learned which dealers had the best ratings and reviews. This was actually getting exciting. I was feeling really empowered. My next step was to request online quotes from the some of the highest rated dealers but I already knew exactly how much I was going to pay. This was really a test for the dealers. My new mantra was “let he who delivers the best customer experience win.” An inside sales rep from one dealer responded to my quote request within a couple of hours. I told him I had already decided on the make and model and it was just a matter of figuring out who I would buy it from. I also told them that I was really busy and wouldn’t set foot in the dealership unless we had come to terms beforehand. Lastly, I let him know that I’d prefer to work out the details via email. He promised to get back to me shortly with a detailed quote. Over the next few days I received calls from other dealers. One asked me a host of questions that I had already answered in their lengthy online form. Another blamed their website performance issues for their delay in responding to my request. But by then it didn’t really matter because I’d already bought the car days before from the dealer who responded to me first and who was willing to adjust their sales process to accommodate my buying one. So, yes, I really do believe we are in the midst of a customer experience revolution. And every revolution leaves some victorious and other vanquished. Which side do you want to be on when it comes to the customer experience revolution?

Read the article

Thoughts on the Nomination Committee Campaign 2014

- by Testas

Congratulations to Erin, Andy and Allen on making the Nomination Committee for 2014. As Mark Broadbent (@retracement) stated in his tweet, there’s a great set of individuals for the Nom Com, and I could not agree more. I know Erin and Allen, and I know how much value they will bring to the process. I don’t know Andy as well, but I am sure he will do a great job and I hope I can meet him at PASS soon. The final candidate appointed by the PASS board is Rick Bolesta, who brings a wealth of experience to the process. I also want to take the opportunity to thank all who have voted. Not just for me, but for all the candidates during the election. Your contribution is greatly appreciated. Would I apply for the Nom Com again? Yes I would. My first election experience has been a learning experience in itself. So I accept the result and look forward to applying next year. Moving on from this, I do want to express my opinion about the lack of international representation in the election process. One of the tweets that I saw after the result was from Adam Machanic (@AdamMachanic) who commented on the lack of international members on the Nom Com. If truth be told, I was disappointed – when the candidate list was released -- that for the second time in recent elections there was a lack of international candidates on the candidate list. It feels that only Brits and Americans partake in such elections. This is a real shame, and I can’t help thinking why this is the case. Hugo Kornelis (@Hugo_Kornelis) wrote a blog here to express his thoughts. He did raise some valid points. I don’t know why there is an absence of international candidates. I know that the team at PASS are looking to improve the situation, so I do not want to give the impression that PASS are doing nothing. For reference please see Bill Graziano’ s article here to see how PASS are addressing the situation. There is a clear direction to change the rules within PASS to give greater inclusion of international members. In addition to this, I wanted to explore a couple of potential approaches to address the situation. I am not saying that they are the right answer, but when I see challenges, I like to bring potential solutions to the table. 1. Use the PASS mission statement to define a tactical objective that engages community leaders into the election process. If you are not familiar with the PASS mission statement, let me provide it here as laid out on the PASS website. “Empower data professionals who leverage Microsoft technologies to connect, share, and learn through networking, knowledge sharing, and peer-based learning” PASS fulfil this mission statement regularly. Whether you attend SQL Saturday, SQLRally, SQLPASS and BA conference itself. The biggest value of PASS is the ability to bring our profession together. And the 24 hour hop allows you to learn from the comfort of your own office/home. This mission should be extended to define a tactical objectives that bring greater networking and knowledge sharing between PASS Chapter leaders/Regional Mentors and PASS HQ. It should help educate the leaders about the opportunities of elections and how leaders can become involved. I know PASS engage with Chapter leaders on a regular basis to discuss community matters for the benefit of PASS members. How could this be achieved? Perhaps PASS could perform a quarterly virtual meeting that specifically looks at helping leaders become more involved with the election process 2. Evolve the Global Growth Strategy into a Global Engagement Strategy. One of the remits of the PASS board over the last couple of years is the Global Growth strategy. This has been very successful as we have seen the massive growth of events across the world. For that, I congratulate the board for this success. Perhaps the time is now right to look at solidifying this success, through a Global Engagement Strategy that starts with the collaboration of Chapter Leaders, Regional Mentors and Evangelists in their respective Countries or Regions. The engagement strategy should look at increasing collaboration between community leaders for the benefit of their respective communities. It should also provide a channel for encouraging leaders to put themselves forward for the elections. How could this be achieved? In the UK, there has been a big growth in PASS Chapters and SQL Server Events that was approaching saturation point. The introduction of the Community Engagement Day -- channelled through the SQLBits conference -- has enabled Chapter Leaders to collaborate, connect and share with PASS, Sponsors and Microsoft. It also provides the ability for Chapter Leaders to speak directly to the PASS representatives from PASSHQ. This brings with it the ability for PASS community evangelists to communicate PASS objectives. It has also been the event where we have found out; and/or encouraged, Chapter Leaders to put themselves forward for elections. People like encouragement and validation when going for something like an election, and being able to discuss this with peers at a dedicated event provides a useful platform. PASS has the people in place already to facilitate such an event. Regional Mentors could potentially help organise such events on an annual basis, with PASSHQ providing support in providing a room/Lync access for the event to take place. It would be really good if a PASSHQ representative could attend in person as well. 3. Restrict candidates to serve only a limited number of terms. A frequent comment I saw on social networking was that the elections can be seen by some as a popularity conference. Perhaps by limiting the number of terms that an individual can serve on either the Nom Com or the BOD, other candidates may be encouraged to be more actively involved within the PASS election process. I don’t think that the current byelaws deal with this particular suggestion. I also saw a couple of tweets that stated that more active community members did not apply for the Nom Com. I struggled to understand how the individuals of the tweets measured “more active”. It just also further solidified the subjective nature of elections. In the absence of how candidates are put forward for the elections. Then a restriction of terms enables the opportunity to be extended to others. How could this be achieved? Set a resolution that is put to a community vote as to the viability of such a solution. For example, the questions for the vote could be: Should individuals in the Nom Com and BoD be limited to a certain number of terms? Yes/No. What is the maximum number of terms a candidate could serve? It would be simple to execute such a vote, and the community will have an opportunity to have a say in an important aspect of the PASS organisation. And is the change is successful, then add it as a byelaw. So there are some of my thoughts. I am not saying they are right or wrong. But I do hope that there is a concerted effort to encourage more candidates from other reaches of the Globe to become involved with future elections. It would be good to hear your thoughts Thanks Chris

Read the article

Developing with Fluid UI – The Fluid Home Page

- by Dave Bain

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} The first place to start with Fluid UI is with the Fluid Home Page. Sometimes it’s referred to as the landing page, but it’s formally called the Fluid Home Page. It’s delivered with PeopleTools 8.54, and the nice thing about it is, it’s a component. That’s one thing you’ll discover with Fluid UI. Fluid UI is built int PeopleTools with Fluid UI. The Home Page is a component, the tiles or grouplets are group boxes, and the search and prompt pages are just pages. It makes it easy to find things, customize and brand the applications (and of course to see what’s going on) when you can open it in AppDesigner. To see what makes a component fluid, let’s start with the Fluid Home Page. It’s a component called PT_LANDINGPAGE. You can open it in AppDesigner and see what’s unique and different about Fluid UI. If you open the Component Properties dialog, you’ll see a new tab called Fluid On the Component Properties Fluid tab you’ll see the most important checkbox of all, Fluid Mode. That is the one flag that will tell PeopleSoft if the component is Fluid (responsive, dynamic layout) or classic (pixel perfect). Now that you know it’s a single flag, you know that a component can’t be both Fluid UI and Classic at the same time, it’s one or the other. There are some other interesting fields on this page. The Small Form Factor Optimized field tells us whether or not to display this on a small device (think smarphone). Header Toolbar Actions offer standard options that are set at the component level so you have complete control of the components header bar. You’ll notice that the PT_LANDINGPAGE has got some PostBuild PeopleCode. That’s to build the grouplets that are used to launch Fluid UI Pages (more about those later). Probably not a good idea to mess with that code! The next thing to look at is the Page Definition for the PT_LANDINGPAGE component. When you open the page PT_LANDINGPAGE it will look different than anything you’ve ever seen. You’re probably thinking “What’s up with all the group boxes”? That is where Fluid UI is so different. In classic PeopleSoft, you put a button, field, group, any control on a page and that’s where it shows up, no questions asked. With Fluid UI, everything is positioned relative to something else. That’s why there are so many containers (you know them as group boxes). They are UI objects that are used for dynamic positioning. The Fluid Home Page has some special behavior and special settings. The first is in the Web Profile Configuration settings (Main Menu->PeopleTools->Web Profile->Web Profile Configuration from the main menu). There are two checkboxes that control the behavior of Fluid UI. Disable Fluid Mode and Disable Fluid On Desktop. Disable Fluid Mode prevents any Fluid UI component from being run from this installation. This is a web profile setting for users that want to run later versions of PeopleTools but only want to run Classic PeopleSoft pages. The second setting, Disable Fluid On Desktop allows the Fluid UI to be run on mobile devices such as smartphones and tablets, but prevents Fluid UI from running on a desktop computer. Fluid UI settings are also make in My Personalizations (Main Menu->My Personalizations from the Main Menu), in the General Options section. In that section, each user has the choice to determine the home page for their desktop and for tablets. Now that you know the Fluid UI landing page is just a component, and the profile and personalization settings, you should be able to launch one. It’s pretty easy to add a menu using Structure and Content, just make sure the proper security is set up. You’ll have to run a Fluid UI supported browser in order to see it. Latest versions of Chrome, Firefox and IE will do. Check the certification page on MOS for all the details. When you open the first Fluid Landing Page, there’s not much there. Not to worry, we’ll get some content on it soon. Take a moment to navigate around and look at some of the header actions that were set up from the component properties. The home button takes you back to the classic system. You won’t see any notifications and the personalization doesn’t have any content to add. The NavBar icon on the top right has a lot of content, including a Navigator and Classic home. Spend some time looking through what’s available. Stay tuned for more. Next up is adding some content. Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:8.0pt; mso-para-margin-left:0in; line-height:107%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

Guide to MySQL & NoSQL, Webinar Q&A

- by Mat Keep

0 0 1 959 5469 Homework 45 12 6416 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin; mso-ansi-language:EN-US;} Yesterday we ran a webinar discussing the demands of next generation web services and how blending the best of relational and NoSQL technologies enables developers and architects to deliver the agility, performance and availability needed to be successful. Attendees posted a number of great questions to the MySQL developers, serving to provide additional insights into areas like auto-sharding and cross-shard JOINs, replication, performance, client libraries, etc. So I thought it would be useful to post those below, for the benefit of those unable to attend the webinar. Before getting to the Q&A, there are a couple of other resources that maybe useful to those looking at NoSQL capabilities within MySQL: - On-Demand webinar (coming soon!) - Slides used during the webinar - Guide to MySQL and NoSQL whitepaper - MySQL Cluster demo, including NoSQL interfaces, auto-sharing, high availability, etc. So here is the Q&A from the event Q. Where does MySQL Cluster fit in to the CAP theorem? A. MySQL Cluster is flexible. A single Cluster will prefer consistency over availability in the presence of network partitions. A pair of Clusters can be configured to prefer availability over consistency. A full explanation can be found on the MySQL Cluster & CAP Theorem blog post. Q. Can you configure the number of replicas? (the slide used a replication factor of 1) Yes. A cluster is configured by an .ini file. The option NoOfReplicas sets the number of originals and replicas: 1 = no data redundancy, 2 = one copy etc. Usually there's no benefit in setting it >2. Q. Interestingly most (if not all) of the NoSQL databases recommend having 3 copies of data (the replication factor). Yes, with configurable quorum based Reads and writes. MySQL Cluster does not need a quorum of replicas online to provide service. Systems that require a quorum need > 2 replicas to be able to tolerate a single failure. Additionally, many NoSQL systems take liberal inspiration from the original GFS paper which described a 3 replica configuration. MySQL Cluster avoids the need for a quorum by using a lightweight arbitrator. You can configure more than 2 replicas, but this is a tradeoff between incrementally improved availability, and linearly increased cost. Q. Can you have cross node group JOINS? Wouldn't that run into the risk of flooding the network? MySQL Cluster 7.2 supports cross nodegroup joins. A full cross-join can require a large amount of data transfer, which may bottleneck on network bandwidth. However, for more selective joins, typically seen with OLTP and light analytic applications, cross node-group joins give a great performance boost and network bandwidth saving over having the MySQL Server perform the join. Q. Are the details of the benchmark available anywhere? According to my calculations it results in approx. 350k ops/sec per processor which is the largest number I've seen lately The details are linked from Mikael Ronstrom's blog The benchmark uses a benchmarking tool we call flexAsynch which runs parallel asynchronous transactions. It involved 100 byte reads, of 25 columns each. Regarding the per-processor ops/s, MySQL Cluster is particularly efficient in terms of throughput/node. It uses lock-free minimal copy message passing internally, and maximizes ID cache reuse. Note also that these are in-memory tables, there is no need to read anything from disk. Q. Is access control (like table) planned to be supported for NoSQL access mode? Currently we have not seen much need for full SQL-like access control (which has always been overkill for web apps and telco apps). So we have no plans, though especially with memcached it is certainly possible to turn-on connection-level access control. But specifically table level controls are not planned. Q. How is the performance of memcached APi with MySQL against memcached+MySQL or any other Object Cache like Ecache with MySQL DB? With the memcache API we generally see a memcached response in less than 1 ms. and a small cluster with one memcached server can handle tens of thousands of operations per second. Q. Can .NET can access MemcachedAPI? Yes, just use a .Net memcache client such as the enyim or BeIT memcache libraries. Q. Is the row level locking applicable when you update a column through memcached API? An update that comes through memcached uses a row lock and then releases it immediately. Memcached operations like "INCREMENT" are actually pushed down to the data nodes. In most cases the locks are not even held long enough for a network round trip. Q. Has anyone published an example using something like PHP? I am assuming that you just use the PHP memcached extension to hook into the memcached API. Is that correct? Not that I'm aware of but absolutely you can use it with php or any of the other drivers Q. For beginner we need more examples. Take a look here for a fully worked example Q. Can I access MySQL using Cobol (Open Cobol) or C and if so where can I find the coding libraries etc? A. There is a cobol implementation that works well with MySQL, but I do not think it is Open Cobol. Also there is a MySQL C client library that is a standard part of every mysql distribution Q. Is there a place to go to find help when testing and/implementing the NoSQL access? If using Cluster then you can use the [email protected] alias or post on the MySQL Cluster forum Q. Are there any white papers on this? Yes - there is more detail in the MySQL Guide to NoSQL whitepaper If you have further questions, please don’t hesitate to use the comments below!

Read the article

Contracting as a Software Developer in the UK

- by Frez

Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} Having had some 15 years’ experience of working as a software contractor, I am often asked by developers who work as permanent employees (permies) about the pros and cons of working as a software consultant through my own limited company and whether the move would be a good one for them. Whilst it is possible to contract using other financial vehicles such as umbrella companies, this article will only consider limited companies as that is what I have experience of using. Contracting or consultancy requires a different mind-set from being a permanent member of staff, and not all developers are capable of this shift in attitude. Whilst you can look forward to an increase in the money you take home, there are real risks and expenses you would not normally be exposed to as a permie. So let us have a look at the pros and cons: Pros: More money There is no doubt that whilst you are working on contracts you will earn significantly more than you would as a permanent employee. Furthermore, working through a limited company is more tax efficient. Less politics You really have no need to involve yourself in office politics. When the end of the day comes you can go home and not think or worry about the power struggles within the company you are contracted to. Your career progression is not tied to the company. Expenses from gross income All your expenses of trading as a business will come out of your company’s gross income, i.e. before tax. This covers travelling expenses provided you have not been at the same client/location for more than two years, internet subscriptions, professional subscriptions, software, hardware, accountancy services and so on. Cons: Work is more transient Contracts typically range from a couple of weeks to a year, although will most likely start at 3 months. However, most contracts are extended either because the project you have been brought in to help with takes longer to deliver than expected, the client decides they can use you on other aspects of the project, or the client decides they would like to use you on other projects. The temporary nature of the work means that you will have down-time between contracts while you secure new opportunities during which time your company will have no income. You may need to attend several interviews before securing a new contract. Accountancy expenses Your company is a separate entity and there are accountancy requirements which, unless you like paperwork, means your company will need to appoint an accountant to prepare your company’s accounts. It may also be worth purchasing some accountancy software, so talk to your accountant about this as they may prefer you to use a particular software package so they can integrate it with their systems. VAT You will need to register your company for VAT. This is tax neutral for you as the VAT you charge your clients you will pass onto the government less any VAT you are reclaiming from expenses, but it is additional paperwork to undertake each quarter. It is worth checking out the Fixed Rate VAT Scheme that is available, particularly after the initial expenses of setting up your company are over. No training Clients take you on based on your skills, not to train you when they will lose that investment at the end of the contract, so understand that it is unlikely you will receive any training funded by a client. However, learning new skills during a contract is possible and you may choose to accept a contract on a lower rate if this is guaranteed as it will help secure future contracts. No financial extras You will have no free pension, life, accident, sickness or medical insurance unless you choose to purchase them yourself. A financial advisor can give you all the necessary advice in this area, and it is worth taking seriously. A year after I started as a consultant I contracted a serious illness, this kept me off work for over two months, my client was very understanding and it could have been much worse, so it is worth considering what your options might be in the case of illness, death and retirement. Agencies Whilst it is possible to work directly for end clients there are pros and cons of working through an agency. The main advantage is cash flow, you invoice the agency and they typically pay you within a week, whereas working directly for a client could have you waiting up to three months to be paid. The downside of working for agencies, especially in the current difficult times, is that they may go out of business and you then have difficulty getting the money you are owed. Tax investigation It is possible that the Inland Revenue may decide to investigate your company for compliance with tax law. Insurance is available to cover you for this. My personal recommendation would be to join the PCG as this insurance is included as a benefit of membership, Professional Indemnity Some agencies require that you are covered by professional indemnity insurance; this is a cost you would not incur as a permie. Travel Unless you live in an area that has an abundance of opportunities, such as central London, it is likely that you will be travelling further, longer and with more expense than if you were permanently employed at a local company. This not only affects you monetarily, but also your quality of life and the ability to keep fit and healthy. Obtaining finance If you want to secure a mortgage on a property it can be more difficult or expensive, especially if you do not have three years of audited accounts to show a mortgage lender. Caveat This post is my personal opinion and should not be used as a definitive guide or recommendation to contracting and whether it is suitable for you as an individual, i.e. I accept no responsibility if you decide to take up contracting based on this post and you fare badly for whatever reason.

Read the article

T4 Performance Counters explained

- by user13346607

Now that T4 is out for a few month some people might have wondered what details of the new pipeline you can monitor. A "cpustat -h" lists a lot of events that can be monitored, and only very few are self-explanatory. I will try to give some insight on all of them, some of these "PIC events" require an in-depth knowledge of T4 pipeline. Over time I will try to explain these, for the time being these events should simply be ignored. (Side note: some counters changed from tape-out 1.1 (*only* used in the T4 beta program) to tape-out 1.2 (used in the systems shipping today) The table only lists the tape-out 1.2 counters) 0 0 1 1058 6033 Oracle Microelectronics 50 14 7077 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} pic name (cpustat) Prose Comment Sel-pipe-drain-cycles, Sel-0-[wait|ready], Sel-[1,2] Sel-0-wait counts cycles a strand waits to be selected. Some reasons can be counted in detail; these are: Sel-0-ready: Cycles a strand was ready but not selected, that can signal pipeline oversubscription Sel-1: Cycles only one instruction or µop was selected Sel-2: Cycles two instructions or µops were selected Sel-pipe-drain-cycles: cf. PRM footnote 8 to table 10.2 Pick-any, Pick-[0|1|2|3] Cycles one, two, three, no or at least one instruction or µop is picked Instr_FGU_crypto Number of FGU or crypto instructions executed on that vcpu Instr_ld dto. for load Instr_st dto. for store SPR_ring_ops dto. for SPR ring ops Instr_other dto. for all other instructions not listed above, PRM footnote 7 to table 10.2 lists the instructions Instr_all total number of instructions executed on that vcpu Sw_count_intr Nr of S/W count instructions on that vcpu (sethi %hi(fc000),%g0 (whatever that is)) Atomics nr of atomic ops, which are LDSTUB/a, CASA/XA, and SWAP/A SW_prefetch Nr of PREFETCH or PREFETCHA instructions Block_ld_st Block loads or store on that vcpu IC_miss_nospec, IC_miss_[L2_or_L3|local|remote]\ _hit_nospec Various I$ misses, distinguished by where they hit. All of these count per thread, but only primary events: T4 counts only the first occurence of an I$ miss on a core for a certain instruction. If one strand misses in I$ this miss is counted, but if a second strand on the same core misses while the first miss is being resolved, that second miss is not counted This flavour of I$ misses counts only misses that are caused by instruction that really commit (note the "_nospec") BTC_miss Branch target cache miss ITLB_miss ITLB misses (synchronously counted) ITLB_miss_asynch dto. but asynchronously [I|D]TLB_fill_\ [8KB|64KB|4MB|256MB|2GB|trap] H/W tablewalk events that fill ITLB or DTLB with translation for the corresponding page size. The “_trap” event occurs if the HWTW was not able to fill the corresponding TLB IC_mtag_miss, IC_mtag_miss_\ [ptag_hit|ptag_miss|\ ptag_hit_way_mismatch] I$ micro tag misses, with some options for drill down Fetch-0, Fetch-0-all fetch-0 counts nr of cycles nothing was fetched for this particular strand, fetch-0-all counts cycles nothing was fetched for all strands on a core Instr_buffer_full Cycles the instruction buffer for a strand was full, thereby preventing any fetch BTC_targ_incorrect Counts all occurences of wrongly predicted branch targets from the BTC [PQ|ROB|LB|ROB_LB|SB|\ ROB_SB|LB_SB|RB_LB_SB|\ DTLB_miss]\ _tag_wait ST_q_tag_wait is listed under sl=20. These counters monitor pipeline behaviour therefore they are not strand specific: PQ_...: cycles Rename stage waits for a Pick Queue tag (might signal memory bound workload for single thread mode, cf. Mail from Richard Smith) ROB_...: cycles Select stage waits for a ROB (ReOrderBuffer) tag LB_...: cycles Select stage waits for a Load Buffer tag SB_...: cycles Select stage waits for Store Buffer tag combinations of the above are allowed, although some of these events can overlap, the counter will only be incremented once per cycle if any of these occur DTLB_...: cycles load or store instructions wait at Pick stage for a DTLB miss tag [ID]TLB_HWTW_\ [L2_hit|L3_hit|L3_miss|all] Counters for HWTW accesses caused by either DTLB or ITLB misses. Canbe further detailed by where they hit IC_miss_L2_L3_hit, IC_miss_local_remote_remL3_hit, IC_miss I$ prefetches that were dropped because they either miss in L2$ or L3$ This variant counts misses regardless if the causing instruction commits or not DC_miss_nospec, DC_miss_[L2_L3|local|remote_L3]\ _hit_nospec D$ misses either in general or detailed by where they hit cf. the explanation for the IC_miss in two flavours for an explanation of _nospec and the reasoning for two DC_miss counters DTLB_miss_asynch counts all DTLB misses asynchronously, there is no way to count them synchronously DC_pref_drop_DC_hit, SW_pref_drop_[DC_hit|buffer_full] L1-D$ h/w prefetches that were dropped because of a D$ hit, counted per core. The others count software prefetches per strand [Full|Partial]_RAW_hit_st_[buf|q] Count events where a load wants to get data that has not yet been stored, i. e. it is still inside the pipeline. The data might be either still in the store buffer or in the store queue. If the load's data matches in the SB and in the store queue the data in buffer takes precedence of course since it is younger [IC|DC]_evict_invalid, [IC|DC|L1]_snoop_invalid, [IC|DC|L1]_invalid_all Counter for invalidated cache evictions per core St_q_tag_wait Number of cycles pipeline waits for a store queue tag, of course counted per core Data_pref_[drop_L2|drop_L3|\ hit_L2|hit_L3|\ hit_local|hit_remote] Data prefetches that can be further detailed by either why they were dropped or where they did hit St_hit_[L2|L3], St_L2_[local|remote]_C2C, St_local, St_remote Store events distinguished by where they hit or where they cause a L2 cache-to-cache transfer, i.e. either a transfer from another L2$ on the same die or from a different die DC_miss, DC_miss_\ [L2_L3|local|remote]_hit D$ misses either in general or detailed by where they hit cf. the explanation for the IC_miss in two flavours for an explanation of _nospec and the reasoning for two DC_miss counters L2_[clean|dirty]_evict Per core clean or dirty L2$ evictions L2_fill_buf_full, L2_wb_buf_full, L2_miss_buf_full Per core L2$ buffer events, all count number of cycles that this state was present L2_pipe_stall Per core cycles pipeline stalled because of L2$ Branches Count branches (Tcc, DONE, RETRY, and SIT are not counted as branches) Br_taken Counts taken branches (Tcc, DONE, RETRY, and SIT are not counted as branches) Br_mispred, Br_dir_mispred, Br_trg_mispred, Br_trg_mispred_\ [far_tbl|indir_tbl|ret_stk] Counter for various branch misprediction events. Cycles_user counts cycles, attribute setting hpriv, nouser, sys controls addess space to count in Commit-[0|1|2], Commit-0-all, Commit-1-or-2 Number of times either no, one, or two µops commit for a strand. Commit-0-all counts number of times no µop commits for the whole core, cf. footnote 11 to table 10.2 in PRM for a more detailed explanation on how this counters interacts with the privilege levels

Read the article

Rapid Evolution of Society & Technology

- by Michael Snow

We caught up with Brian Solis on the phone the other day and Christie Flanagan had a chance to chat with him and learn a bit more about him and some of the concepts he'll be addressing in our Social Business Thought Leaders Webcast on Thursday 12/13/12. «--- Interview with Brian Solis Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast- mso-fareast-theme-font:minor-latin; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Be sure and register for this week's webcast ---» ------------------- Guest post by Brian Solis. Reposted (Borrowed) from his posting of May 24, 2012 Dear [insert business name], what’s your promise? - Brian Solis You say you want to get closer to customers, but your actions are different than your words. You say you want to “surprise and delight” customers, but your product development teams are too busy building against a roadmap without consideration of the 5th P of marketing…people. Your employees are your number one asset, however the infrastructure of the organization has turned once optimistic and ambitious intrapreneurs into complacent cogs or worse, your greatest detractors. You question the adoption of disruptive technology by your internal champions yet you’ve not tried to find the value for yourself. You’re a change agent and you truly wish to bring about change, but you’ve not invested time or resources to answer “why” in your endeavors to become a connected or social business. If we are to truly change, we must find purpose. We must uncover the essence of our business and the value it delivers to traditional and connected consumers. We must rethink the spirit of today’s embrace and clearly articulate how transformation is going to improve customer and employee experiences and relationships now and over time. Without doing so, any attempts at evolution will be thwarted by reality. In an era of Digital Darwinism, no business is too big to fail or too small to succeed. These are undisciplined times which require alternative approaches to recognize and pursue new opportunities. But everything begins with acknowledging the 360 view of the world that you see today is actually a filtered view of managed and efficient convenience. Today, many organizations that were once inspired by innovation and engagement have fallen into a process of marketing, operationalizing, managing, and optimizing. That might have worked for the better part of the last century, but for the next 10 years and beyond, new vision, leadership and supporting business models will be written to move businesses from rigid frameworks to adaptive and agile entities. I believe that today’s executives will undergo a great test; a test of character, vision, intention, and universal leadership. It starts with a simple, but essential question…what is your promise? Notice, I didn’t ask about your brand promise. Nor did I ask for you to cite your mission and vision statements. This is much more than value propositions or manufactured marketing language designed to hook audiences and stakeholders. I asked for your promise to me as your consumer, stakeholder, and partner. This isn’t about B2B or B2C, but instead, people to people, person to person. It is this promise that will breathe new life into an organization that on the outside, could be misdiagnosed as catatonic by those who are disrupting your markets. A promise, for example, is meant to inspire. It creates alignment. It serves as the foundation for your vision, mission, and all business strategies and it must come from the top to mean anything. For without it, we cannot genuinely voice what it is we stand for or stand behind. Think for a moment about the definition of community. It’s easy to confuse a workplace or a market where everyone simply shares common characteristics. However, a community in this day and age is much more than belonging to something, it’s about doing something together that makes belonging matter The next few years will force a divide where companies are separated by intention as measured by actions and words. But, becoming a social business is not enough. Becoming more authentic and transparent doesn’t serve as a mantra for a renaissance. A promise is the ink that inscribes the spirit of the relationship between you and me. A promise serves as the words that influence change from within and change beyond the halls of our business. It is the foundation for a renewed embrace, one that must then find its way to every aspect of the organization. It’s the difference between a social business and an adaptive business. While an adaptive business can also be social, it is the culture of the organization that strives to not just use technology to extend current philosophies or processes into new domains, but instead give rise to a new culture where striving for relevance is among its goals. The tools and networks simply become enablers of a greater mission You are reading this because you believe in something more than what you’re doing today. While you fight for change within your organization, remember to aim for a higher purpose. Organizations that strive for innovation, imagination, and relevance will outperform those that do not. Part of your job is to lead a missionary push that unites the groundswell with a top down cascade. Change will only happen because you and other internal champions see what others can’t and will do what other won’t. It takes resolve. It takes the ability to translate new opportunities into business value. And, it takes courage. “This is a very noisy world, so we have to be very clear what we want them to know about us”-Steve Jobs ----------------------------------------------------------------- So -- where do you begin to evaluate the kind of experience you are delivering for your customers, partners, and employees? Take a look at this White Paper: Creating a Successful and Meaningful Customer Experience on the Web and then have a cup of coffee while you listen to the sage advice of Guy Kawasaki in a short video below. An interview with Guy Kawasaki on Maximizing Social Media Channels

Read the article

Configuring Oracle HTTP Server 12c for WebLogic Server Domain

- by Emin Askerov

Oracle HTTP Server (OHS) 12c 12.1.2 which was released in July 2013 as a part of Oracle Web Tier 12c is the web server component of Oracle Fusion Middleware. In essence this is Apache HTTP Server 2.2.22 (with critical bug fixes from higher versions) which includes modules developed specifically by Oracle. It provides a listener functionality for Oracle WebLogic Server and the framework for hosting static pages, dynamic pages, and applications over the Web. OHS can be easily managed by Weblogic Management Framework, a set of tools which provides administrative capabilities (start, stop, lifecycle operations, etc.) for Oracle Fusion Middleware products. In other words all tools which are familiar to us (Node Manager, WLST, Administration Console, Fusion Middleware Control etc.) presented as a part of Weblogic Management Framework and using for managing Java and System Components both for Weblogic Server and Standalone Domain types. You can familiarize yourself with these terms using related documentation: 1. Introduction to Oracle HTTP Server: http://docs.oracle.com/middleware/1212/webtier/index.html 2. Weblogic Management Framework: http://docs.oracle.com/middleware/1212/core/ASCON/terminology.htm#ASCON11260 In the given post I would like to cover rather simple use case how to configure OHS as web proxy in Weblogic Cluster environment. For example, we have existing Weblogic Domain where some managed servers have been joined to cluster and host business applications. We need to configure web proxy component which will act as entry point, load balancer for our cluster for user requests. Of course, we could install old good Apache HTTP Server and configure mod_wl plugin. However this solution not optimal from manageability perspective: we need to install Apache, install additional plugin then configure it by editing configuration file which is not really convenient for FMW Administrators and often increase time of performing of simple administrative task. Alternatively, we could use OHS as System Component within Weblogic Domain and use full power of Weblogic Management Framework in order to configure, manage and monitor it! I like this idea! What about you? I hope after reading this post you will agree with me. First of all it is necessary to download OHS binaries. You can use this link for downloading: http://www.oracle.com/technetwork/java/webtier/downloads/index2-303202.html As we will use Fusion Middleware Control for managing OHS instances it is necessary to extend your domain with Enterprise Manager and Oracle ADF and JRF templates. This is not topic for focusing in this post, but you could get more information from documentation or one of my previous posts: http://docs.oracle.com/middleware/1212/wls/WLDTR/fmw_templates.htm#sthref64 https://blogs.oracle.com/imc/entry/the_specifics_of_adf_12c Note: you should have properly configured Node Manager utility for managing OHS instances Let’s consider configuration process step by step: 1. Shut down all Weblogic instances of existing domain including Admin Server; 2. Install Oracle HTTP Server. You should use your Fusion Middleware Home Path (e.g. /u01/Oracle/FMW12) for Installation Location and select Colocated HTTP Server option as Installation Type. I will not focus on this topic in this post. All information related to OHS installation you could find here: http://docs.oracle.com/middleware/1212/webtier/WTINS/install_gui.htm#i1082009 3. Next we need to extend our existing domain with OHS component. In order to do this you should do the following: a. Run Fusion Middleware Configuration Wizard (ORACLE_HOME/oracle_common/common/bin/config.sh); b. On the step 1 select Update an existing domain option and point your Fusion Middleware Home Path; c. On the step 2 check Oracle HTTP Server, Oracle Enterprise Manager Plugin for WEBTIER templates; d. Go through other steps without any changes and finish configuration process. 4. Start Admin Server and all managed servers related to your cluster 5. Log in to Enterprise Manager FMW Control using http://<hostname>:<port>/em URL 6. Now we will create OHS instance within our Weblogic Domain Infrastructure. Navigate to Weblogic Domain -> Administration -> Create/Delete OHS menu item; 7. Enter to edit mode, clicking Changes -> Lock&Edit menu item; 8. Create new OHS instance clicking Create button; 9. Define Instance Name (e.g. DevOSH) and Machine parameters; 10. Now we need to define listen port. By default OHS will use 7777 port number for income HTTP requests. We could change it to any free port number we would like to use. In order to do it, right click on our created OHS instance (left hand panel) and navigate to Administration -> Port Configuration; 11. Click on record with port number 7777 and then click Edit button; 12. Change port number value (in our case this will be 8080) and then click OK button; 13. Now we need to edit mod_wl_ohs configuration in order to enable OHS to act as proxy for WebLogic Server Instances/Cluster; 14. In order to do it right click on our created OHS instance (left panel) and navigate to Administration -> mod_wl_ohs Configuration; a. In Weblogic Cluster you should enter cluster address (define <host:port> for all managed servers which participated in cluster), e.g: 192.168.56.2:7004,192.168.56.2:7005 b. Define Weblogic Port parameter at which the Oracle WebLogic Server host is listening for connection requests from the module (or from other servers); c. Check Dynamic Server List option. This will dynamically update cluster list for every request; d. In the Location table define list of endpoint locations which you would like to process. In order to do this click Add Row button and define Location, Weblogic Cluster, Path Trim and Path Prefix parameters (if required); e. Click Apply button in order to save changes. 15. Activate changes clicking Changes ? Activate Changes menu item; 16. Finally we will start configured OHS instance. Right click on OHS instance tree item under Web Tier folder, select Control -> Start Up menu item; 17. Ensure that OHS instance up and running and then test your environment. Run deployed application to your Weblogic Cluster accessing via OHS web proxy; Normal 0 false false false RU X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

Read the article

Securing an ADF Application using OES11g: Part 1

- by user12587121

Future releases of the Oracle stack should allow ADF applications to be secured natively with Oracle Entitlements Server (OES). In a sequence of postings here I explore one way to achive this with the current technology, namely OES 11.1.1.5 and ADF 11.1.1.6. ADF Security Basics ADF Bascis The Application Development Framework (ADF) is Oracle’s preferred technology for developing GUI based Java applications. It can be used to develop a UI for Swing applications or, more typically in the Oracle stack, for Web and J2EE applications. ADF is based on and extends the Java Server Faces (JSF) technology. To get an idea, Oracle provides an online demo to showcase ADF components. ADF can be used to develop just the UI part of an application, where, for example, the data access layer is implemented using some custom Java beans or EJBs. However ADF also has it’s own data access layer, ADF Business Components (ADF BC) that will allow rapid integration of data from data bases and Webservice interfaces to the ADF UI component. In this way ADF helps implement the MVC approach to building applications with UI and data components. The canonical tutorial for ADF is to open JDeveloper, define a connection to a database, drag and drop a table from the database view to a UI page, build and deploy. One has an application up and running very quickly with the ability to quickly integrate changes to, for example, the DB schema. ADF allows web pages to be created graphically and components like tables, forms, text fields, graphs and so on to be easily added to a page. On top of JSF Oracle have added drag and drop tooling with JDeveloper and declarative binding of the UI to the data layer, be it database, WebService or Java beans. An important addition is the bounded task flow which is a reusable set of pages and transitions. ADF adds some steps to the page lifecycle defined in JSF and adds extra widgets including powerful visualizations. It is worth pointing out that the Oracle Web Center product (portal, content management and so on) is based on and extends ADF. ADF Security ADF comes with it’s own security mechanism that is exposed by JDeveloper at development time and in the WLS Console and Enterprise Manager (EM) at run time. The security elements that need to be addressed in an ADF application are: authentication, authorization of access to web pages, task-flows, components within the pages and data being returned from the model layer. One typically relies on WLS to handle authentication and because of this users and groups will also be handled by WLS. Typically in a Dev environment, users and groups are stored in the WLS embedded LDAP server. One has a choice when enabling ADF security (Application->Secure->Configure ADF Security) about whether to turn on ADF authorization checking or not: In the case where authorization is enabled for ADF one defines a set of roles in which we place users and then we grant access to these roles to the different ADF elements (pages or task flows or elements in a page). An important notion here is the difference between Enterprise Roles and Application Roles. The idea behind an enterprise role is that is defined in terms of users and LDAP groups from the WLS identity store. “Enterprise” in the sense that these are things available for use to all applications that use that store. The other kind of role is an Application Role and the idea is that a given application will make use of Enterprise roles and users to build up a set of roles for it’s own use. These application roles will be available only to that application. The general idea here is that the enterprise roles are relatively static (for example an Employees group in the LDAP directory) while application roles are more dynamic, possibly depending on time, location, accessed resource and so on. One of the things that OES adds that is that we can define these dynamic membership conditions in Role Mapping Policies. To make this concrete, here is how, at design time in Jdeveloper, one assigns these rights in Jdeveloper, which puts them into a file called jazn-data.xml: When the ADF app is deployed to a WLS this JAZN security data is pushed to the system-jazn-data.xml file of the WLS deployment for the policies and application roles and to the WLS backing LDAP for the users and enterprise roles. Note the difference here: after deploying the application we will see the users and enterprise roles show up in the WLS LDAP server. But the policies and application roles are defined in the system-jazn-data.xml file. Consult the embedded WLS LDAP server to manage users and enterprise roles by going to the domain console and then Security Realms->myrealm->Users and Groups: For production environments (or in future to share this data with OES) one would then perform the operation of “reassociating” this security policy and application role data to a DB schema (or an LDAP). This is done in the EM console by reassociating the Security Provider. This blog posting has more explanations and references on this reassociation process. If ADF Authentication and Authorization are enabled then the Security Policies for a deployed application can be managed in EM. Our goal is to be able to manage security policies for the applicaiton rather via OES and it's console. Security Requirements for an ADF Application With this package tour of ADF security we can see that to secure an ADF application with we would expect to be able to take care of at least the following items: Authentication, including a user and user-group store Authorization for page access Authorization for bounded Task Flow access. A bounded task flow has only one point of entry and so if we protect that entry point by calling to OES then all the pages in the flow are protected. Authorization for viewing data coming from the data access layer In the next posting we will describe a sample ADF application and required security policies. References ADF Dev Guide: Fusion Middleware Fusion Developer's Guide for Oracle Application Development Framework: Enabling ADF Security in a Fusion Web Application Oracle tutorial on securing a sample ADF application, appears to require ADF 11.1.2 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

The Future of Project Management is Social

- by Natalia Rachelson

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A guest post by Kazim Isfahani, Director, Product Marketing, Oracle Rapid Ascent. Breakneck Speed. Lightning Fast. Perhaps even overwhelming. No matter which set of adjectives we use to describe it, social media’s rise into the enterprise mainstream has been unprecedented. Indeed, the big 4 social media powerhouses (Facebook, Google+, LinkedIn, and Twitter), have nearly 2 Billion users between them. You may be asking (as you should really) “That’s all well and good for the consumer, but for me at my company, what’s your point? Beyond the fact that I can check and post updates, that is.” Good question, kind sir. Impact of Social and Collaboration on Project Management I’ll dovetail this discussion to the project management realm, since that’s what I’m writing about. Speed is a big challenge for project-driven organizations. Anything that can help speed up project delivery - be it a new product introduction effort or a geographical expansion project - fast is a good thing. So where does this whole social thing fit particularly since there are already a host of tools to help with traditional project execution? The fact is companies have seen improvements in their productivity by deploying departmental collaboration and other social-oriented solutions. McKinsey’s survey on social tools shows we have reached critical scale: 72% of respondents report that their companies use at least one and over 40% say they are using social networks and blogs. We don’t hear as much about the impact of social media technologies at the project and project manager level, but that does not mean there is none. Consider the new hire. The type of individual entering the workforce and executing on projects is a generation of worker expecting visually appealing, easy to use and easy to understand technology meshing hand-in-hand with business processes. Consider the project manager. The social era has enhanced the role that the project manager must play. Today’s project manager must be a supreme communicator, an influencer, a sympathizer, a negotiator, and still manage to keep all stakeholders in the loop on project progress. Social tools play a significant role in this effort. Now consider the impact to the project team. The way that a project team functions has changed, with newer, social oriented technologies making the process of information dissemination and team communications much more fluid. It’s clear that a shift is occurring where “social” is intersecting with project management. The Rise of Social Project Management We refer to the melding of project management and social networking as Social Project Management. Social Project Management is based upon the philosophy that the project team is one part of an integrated whole, and that valuable and unique abilities exist within the larger organization. For this reason, Social Project Management systems should be integrated into the collaborative platform(s) of an organization, allowing communication to proceed outside the project boundaries. What makes social project management "social" is an implicit awareness where distributed teams build connected links in ways that were previously restricted to teams that were co-located. Just as critical, Social Project Management embraces the vision of seamless online collaboration within a project team, but also provides for, (and enhances) the use of rigorous project management techniques. Social Project Management acknowledges that projects (particularly large projects) are a social activity - people doing work with people, for other people, with commitments to yet other people. The more people (larger projects), the more interpersonal the interactions, and the more social affects the project. The Epitome of Social - Fusion Project Portfolio Management If I take this one level further to discuss Fusion Project Portfolio Management, the notion of Social Project Management is on full display. With Fusion Project Portfolio Management, project team members have a single place for interaction on projects and access to any other resources working within the Fusion ERP applications. This allows team members the opportunity to be informed with greater participation and provide better information. The application’s the visual appeal, and highly graphical nature makes it easy to navigate information. The project activity stream adds to the intuitive user experience. The goal of productivity is pervasive throughout Fusion Project Portfolio Management. Field research conducted with Oracle customers and partners showed that users needed a way to stay in the context of their core transactions and yet easily access social networking tools. This is manifested in the application so when a user executes a business process, they not only have the transactional application at their fingertips, but also have things like e-mail, SMS, text, instant messaging, chat – all providing a number of different ways to interact with people and/or groups of people, both internal and external to the project and enterprise. But in the end, connecting people is relatively easy. The larger issue is finding a way to serve up relevant, system-generated, actionable information, in real time, which will allow for more streamlined execution on key business processes. Fusion Project Portfolio Management’s design concept enables users to create project communities, establish discussion threads, manage event calendars as well as deliver project based work spaces to organize communications within the context of a project – all within a secure business environment. We’d love to hear from you and get your thoughts and ideas about how Social Project Management is impacting your organization. To learn more about Oracle Fusion Project Portfolio Management, please visit this link

Read the article

Benchmarking MySQL Replication with Multi-Threaded Slaves

- by Mat Keep

0 0 1 1145 6530 Homework 54 15 7660 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin; mso-ansi-language:EN-US;} The objective of this benchmark is to measure the performance improvement achieved when enabling the Multi-Threaded Slave enhancement delivered as a part MySQL 5.6. As the results demonstrate, Multi-Threaded Slaves delivers 5x higher replication performance based on a configuration with 10 databases/schemas. For real-world deployments, higher replication performance directly translates to: · Improved consistency of reads from slaves (i.e. reduced risk of reading "stale" data) · Reduced risk of data loss should the master fail before replicating all events in its binary log (binlog) The multi-threaded slave splits processing between worker threads based on schema, allowing updates to be applied in parallel, rather than sequentially. This delivers benefits to those workloads that isolate application data using databases - e.g. multi-tenant systems deployed in cloud environments. Multi-Threaded Slaves are just one of many enhancements to replication previewed as part of the MySQL 5.6 Development Release, which include: · Global Transaction Identifiers coupled with MySQL utilities for automatic failover / switchover and slave promotion · Crash Safe Slaves and Binlog · Optimized Row Based Replication · Replication Event Checksums · Time Delayed Replication These and many more are discussed in the “MySQL 5.6 Replication: Enabling the Next Generation of Web & Cloud Services” Developer Zone article Back to the benchmark - details are as follows. Environment The test environment consisted of two Linux servers: · one running the replication master · one running the replication slave. Only the slave was involved in the actual measurements, and was based on the following configuration: - Hardware: Oracle Sun Fire X4170 M2 Server - CPU: 2 sockets, 6 cores with hyper-threading, 2930 MHz. - OS: 64-bit Oracle Enterprise Linux 6.1 - Memory: 48 GB Test Procedure Initial Setup: Two MySQL servers were started on two different hosts, configured as replication master and slave. 10 sysbench schemas were created, each with a single table: CREATE TABLE `sbtest` ( `id` int(10) unsigned NOT NULL AUTO_INCREMENT, `k` int(10) unsigned NOT NULL DEFAULT '0', `c` char(120) NOT NULL DEFAULT '', `pad` char(60) NOT NULL DEFAULT '', PRIMARY KEY (`id`), KEY `k` (`k`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1 10,000 rows were inserted in each of the 10 tables, for a total of 100,000 rows. When the inserts had replicated to the slave, the slave threads were stopped. The slave data directory was copied to a backup location and the slave threads position in the master binlog noted. 10 sysbench clients, each configured with 10 threads, were spawned at the same time to generate a random schema load against each of the 10 schemas on the master. Each sysbench client executed 10,000 "update key" statements: UPDATE sbtest set k=k+1 WHERE id = <random row> In total, this generated 100,000 update statements to later replicate during the test itself. Test Methodology: The number of slave workers to test with was configured using: SET GLOBAL slave_parallel_workers=<workers> Then the slave IO thread was started and the test waited for all the update queries to be copied over to the relay log on the slave. The benchmark clock was started and then the slave SQL thread was started. The test waited for the slave SQL thread to finish executing the 100k update queries, doing "select master_pos_wait()". When master_pos_wait() returned, the benchmark clock was stopped and the duration calculated. The calculated duration from the benchmark clock should be close to the time it took for the SQL thread to execute the 100,000 update queries. The 100k queries divided by this duration gave the benchmark metric, reported as Queries Per Second (QPS). Test Reset: The test-reset cycle was implemented as follows: · the slave was stopped · the slave data directory replaced with the previous backup · the slave restarted with the slave threads replication pointer repositioned to the point before the update queries in the binlog. The test could then be repeated with identical set of queries but a different number of slave worker threads, enabling a fair comparison. The Test-Reset cycle was repeated 3 times for 0-24 number of workers and the QPS metric calculated and averaged for each worker count. MySQL Configuration The relevant configuration settings used for MySQL are as follows: binlog-format=STATEMENT relay-log-info-repository=TABLE master-info-repository=TABLE As described in the test procedure, the slave_parallel_workers setting was modified as part of the test logic. The consequence of changing this setting is: 0 worker threads: - current (i.e. single threaded) sequential mode - 1 x IO thread and 1 x SQL thread - SQL thread both reads and executes the events 1 worker thread: - sequential mode - 1 x IO thread, 1 x Coordinator SQL thread and 1 x Worker thread - coordinator reads the event and hands it to the worker who executes 2+ worker threads: - parallel execution - 1 x IO thread, 1 x Coordinator SQL thread and 2+ Worker threads - coordinator reads events and hands them to the workers who execute them Results Figure 1 below shows that Multi-Threaded Slaves deliver ~5x higher replication performance when configured with 10 worker threads, with the load evenly distributed across our 10 x schemas. This result is compared to the current replication implementation which is based on a single SQL thread only (i.e. zero worker threads). Figure 1: 5x Higher Performance with Multi-Threaded Slaves The following figure shows more detailed results, with QPS sampled and reported as the worker threads are incremented. The raw numbers behind this graph are reported in the Appendix section of this post. Figure 2: Detailed Results As the results above show, the configuration does not scale noticably from 5 to 9 worker threads. When configured with 10 worker threads however, scalability increases significantly. The conclusion therefore is that it is desirable to configure the same number of worker threads as schemas. Other conclusions from the results: · Running with 1 worker compared to zero workers just introduces overhead without the benefit of parallel execution. · As expected, having more workers than schemas adds no visible benefit. Aside from what is shown in the results above, testing also demonstrated that the following settings had a very positive effect on slave performance: relay-log-info-repository=TABLE master-info-repository=TABLE For 5+ workers, it was up to 2.3 times as fast to run with TABLE compared to FILE. Conclusion As the results demonstrate, Multi-Threaded Slaves deliver significant performance increases to MySQL replication when handling multiple schemas. This, and the other replication enhancements introduced in MySQL 5.6 are fully available for you to download and evaluate now from the MySQL Developer site (select Development Release tab). You can learn more about MySQL 5.6 from the documentation Please don’t hesitate to comment on this or other replication blogs with feedback and questions. Appendix – Detailed Results

Search Results

Search found 3880 results on 156 pages for 'extended ascii'.

Page 76/156 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83 | Next Page >

- by g18c

- by Vineet Menon

- by jehan

- by Ajay Khanna

- by Brenna Johnson-Oracle

- by extended_events

- by David Allan

- by pinaldave

- by yaldahhakim

- by Christie Flanagan

- by frank.nimphius

- by Irem Radzik

- by Mat Keep

- by Mat Keep

- by Christie Flanagan

- by Testas

- by Dave Bain

- by Mat Keep

- by Frez

- by user13346607

- by Michael Snow

- by Emin Askerov

- by user12587121

- by Natalia Rachelson

- by Mat Keep

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83 | Next Page >