Search Results

Search found 3683 results on 148 pages for 'playing'.

Page 76/148 | < Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >

  • Hardware compatibility on H97 chipset/hardware support

    - by user3238850
    I am aware that there is documentation about compatibility but it is way out dated. I am also aware that there is a hardware compatibility page on Ubuntu website, but that one is focused on the whole box rather than a single piece of hardware. I have some experience with Linux OS, and some experience playing Ubuntu Server in a virtual machine, but never worked on a machine that lives in the real internet. I am building a home server with an Intel H97 chipset motherboard. I have looked at several models and none of them has Linux in the supported OS category. I have the experience of installing Ubuntu Desktop 14.04 on my 4-years-old lap top, and except for some system errors on start up, there is not too much I can complain about, so I guess I should be fine. However, this time I am going to install Ubuntu Server 14.04 on a relatively new piece of hardware(I went to http://linux-drivers.org/ but found nothing really helpful). For example the ASUS motherboard has M.2 socket and Intel LAN I218V chip, the Gigabyte motherboard has two LAN chips(Intel LAN WGI217V and ATHEROS AR8161-BL3A-R). So I really want to make sure everything will work. Usually I would just trust Ubuntu and buy all hardware I need, but basing on my past experience with the Ubuntu Desktop version on my lap top, I am not so convinced. There is an easily noticeable difference: when the system is idle, the fan runs much more frequently and longer under Ubuntu. This leads to my suspicion that generally hardware will have worse support for Ubuntu, which is no surprising at all but enough for me to put this post here. And as far as I know, some Intel CPU features come with software that usually will not run under Linux. Any help, idea or thoughts would be greatly appreciated!

    Read the article

  • Efficient mapping layout in 2D side-scroller, and collisions between character and the world

    - by Jack
    I haven't touched Visual Studio for a couple months now, but I was playing a game from the '90s toady and had an epiphany: I was looking for something what i didn't need, and I wasn't using what I knew correctly. One of those realizations was collision, so let me tell you a bit about my project that I was working on. The project's graphics looks like Mario or Dangerous Dave, etc., you get the idea - old-school pixels. So anyway I remember trying to think of something else than AABB for character form, but I couldn't think of anything. Perhaps I could get a suggestion for this? Another thing is the world - I don't want it to be just linear world, I want mountains, etc.. My idea is to use triangles, and no idea yet what to do if I want just part of the cube, say 3/4 or 2/4 or whatever. Hard-coding such things seems inefficient. P.S. I am not looking at the precision level offered by Box2D. Actually I remember trying to implement it at first, but I failed as my understanding of C++ wasn't advanced enough, as it'll be mentioned below. P.P.S. I am programming in C++, and I haven't done it for a couple months now. I have no means of testing it either, as my PC is broken down, and this one can barely run games from late '90s, not to speak about a compiler or a program with inefficient resource management... I am also not an expert (obviously), I don't even know if I can consider myself an average programmer. In short, I am simply curious about my thoughts and my past experience when programming the game. I may come back to it when my PC is fixed, I'm already filling a note about these things.

    Read the article

  • Can I become a Game Designer? [on hold]

    - by user32721
    This is my first time posting something on a forum in 4 years. I am posting this because I want to adjust my expectations and goals regarding game design. I am in college in Morocco (Al Akhawayn university). just started my junior year. I am a communications major (school of humanities) and a gender studies minor. I want to become a video game designer. It is the only career that I am interested in. I have been playing ever since I was 5 and haven't stopped yet. Currently I don't have any noteworthy skills to become a designer. I don't know how to program (don't really have the patience for it) and I can't draw to save my life. I haven't tried visual software like MAYA or MAX so I can't comment on graphic design. So I basically want to know whether my current education is capable of helping me reach my goal. If not then should I take a master's in game design (in the U.S?) or switch my minor to computer science? I am sorry that this post is long! I look forward to hearing your advice!

    Read the article

  • Can't access any functions after chown command.

    - by explorex
    I am not being to access any functions in my desktop and I don't have an OS besides Ubuntu and I am new to Ubuntu. I think I rebooted my computer thinking that Google Chrome crashed. I opened Google Chrome but it showed opening message but never opened so I restarted my computer. and when my system was loading (I was playing with keyboard dont know what I typed) and when by Ubuntu loaded, I was unable to access anything some of characteristics are listed below: I cannot hear any sound I cannot access wired ethernet connection on the right corner where I usually enable to access internet and I have no internet. There is no local apache server either. when ever I try to start apacer I get setuid must be root or something. When I type sudo then I get message setuid must be root. I cannot access orther external storage devices like pendrive and portable hard drive and cannot mount my other drives with FAT32 filesystem. When I try to start my apache webserver with out typing sudo then I get message cannnot open socket or something like it. I remember also doing command chown -R www-data / earlier and got error message I cannot shutdown my computer, it only logs off

    Read the article

  • CodePlex Daily Summary for Sunday, January 09, 2011

    CodePlex Daily Summary for Sunday, January 09, 2011Popular ReleasesEnhSim: EnhSim 2.2.10 BETA: 2.2.10 BETAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Removed the part...TweetSharp: TweetSharp v2.0.0.0 - Preview 7: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 7 ChangesFixes the regression issue in OAuth from Preview 6 Preview 6 ChangesMaintenance release with user reported fixes Preview 5 ChangesMaintenance release with user reported fixes Third Party Library VersionsHammock v1.0.6: http://hammock.codeplex.com Json.NET 3.5 Release 8: http://json.codeplex.comExtended WPF Toolkit: Extended WPF Toolkit - 1.3.0: What's in the 1.3.0 Release?BusyIndicator ButtonSpinner ChildWindow ColorPicker - Updated (Breaking Changes) DateTimeUpDown - New Control Magnifier - New Control MaskedTextBox - New Control MessageBox NumericUpDown RichTextBox RichTextBoxFormatBar - Updated .NET 3.5 binaries and SourcePlease note: The Extended WPF Toolkit 3.5 is dependent on .NET Framework 3.5 and the WPFToolkit. You must install .NET Framework 3.5 and the WPFToolkit in order to use any features in the To...sNPCedit: sNPCedit v0.9d: added elementclient coordinate catcher to catch coordinates select a target (ingame) i.e. your char, npc or monster than click the button and coordinates+direction will be transfered to the selected row in the table corrected labels from Rot to Direction (because it is a vector)AutoLoL: AutoLoL v1.5.2: Implemented the Auto Updater Fix: Your settings will no longer be cleared with new releases of AutoLoL The mastery Editor and Browser now have their own tabs instead of nested tabs The Browser tab will only show the masteries matching ALL filters instead of just one Added a 'Browse' button in the Mastery Editor tab to open the Masteries Directory The Browser tab now shows a message when there are no mastery files in the Masteries Directory Fix: Fixed the Save As dialog again, for ...Ionics Isapi Rewrite Filter: 2.1 latest stable: V2.1 is stable, and is in maintenance mode. This is v2.1.1.25. It is a bug-fix release. There are no new features. 28629 29172 28722 27626 28074 29164 27659 27900 many documentation updates and fixes proper x64 build environment. This release includes x64 binaries in zip form, but no x64 MSI file. You'll have to manually install x64 servers, following the instructions in the documentation.StyleCop for ReSharper: StyleCop for ReSharper 5.1.14980.000: A considerable amount of work has gone into this release: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes: - StyleCop's new ObjectBasedEnvironment object does not resolve the StyleCop installation path, thus it does not return the correct path ...VivoSocial: VivoSocial 7.4.1: New release with bug fixes and updates for performance.SSH.NET Library: 2011.1.6: Fixes CommandTimeout default value is fixed to infinite. Port Forwarding feature improvements Memory leaks fixes New Features Add ErrorOccurred event to handle errors that occurred on different thread New and improve SFTP features SftpFile now has more attributes and some operations Most standard operations now available Allow specify encoding for command execution KeyboardInteractiveConnectionInfo class added for "keyboard-interactive" authentication. Add ability to specify bo....NET Extensions - Extension Methods Library for C# and VB.NET: Release 2011.03: Added lot's of new extensions and new projects for MVC and Entity Framework. object.FindTypeByRecursion Int32.InRange String.RemoveAllSpecialCharacters String.IsEmptyOrWhiteSpace String.IsNotEmptyOrWhiteSpace String.IfEmptyOrWhiteSpace String.ToUpperFirstLetter String.GetBytes String.ToTitleCase String.ToPlural DateTime.GetDaysInYear DateTime.GetPeriodOfDay IEnumberable.RemoveAll IEnumberable.Distinct ICollection.RemoveAll IList.Join IList.Match IList.Cast Array.IsNullOrEmpty Array.W...EFMVC - ASP.NET MVC 3 and EF Code First: EFMVC 0.5- ASP.NET MVC 3 and EF Code First: Demo web app ASP.NET MVC 3, Razor and EF Code FirstVidCoder: 0.8.0: Added x64 version. Made the audio output preview more detailed and accurate. If the chosen encoder or mixdown is incompatible with the source, the fallback that will be used is displayed. Added "Auto" to the audio mixdown choices. Reworked non-anamorphic size calculation to work better with non-standard pixel aspect ratios and cropping. Reworked Custom anamorphic to be more intuitive and allow display width to be set automatically (Thanks, Statick). Allowing higher bitrates for 6-ch....NET Voice Recorder: Auto-Tune Release: This is the source code and binaries to accompany the article on the Coding 4 Fun website. It is the Auto Tuner release of the .NET Voice Recorder application.BloodSim: BloodSim - 1.3.2.0: - Simulation Log is now automatically disabled and hidden when running 10 or more iterations - Hit and Expertise are now entered by Rating, and include option for a Racial Expertise bonus - Added option for boss to use a periodic magic ability (Dragon Breath) - Added option for boss to periodically Enrage, gaining a Damage/Attack Speed buffAllNewsManager.NET: AllNewsManager.NET 1.2.1: AllNewsManager.NET 1.2.1 It is a minor update from version 1.2xUnit.net - Unit Testing for .NET: xUnit.net 1.7 Beta: xUnit.net release 1.7 betaBuild #1533 Important notes for Resharper users: Resharper support has been moved to the xUnit.net Contrib project. Important note for TestDriven.net users: If you are having issues running xUnit.net tests in TestDriven.net, especially on 64-bit Windows, we strongly recommend you upgrade to TD.NET version 3.0 or later. This release adds the following new features: Added support for ASP.NET MVC 3 Added Assert.Equal(double expected, double actual, int precision)...Json.NET: Json.NET 4.0 Release 1: New feature - Added Windows Phone 7 project New feature - Added dynamic support to LINQ to JSON New feature - Added dynamic support to serializer New feature - Added INotifyCollectionChanged to JContainer in .NET 4 build New feature - Added ReadAsDateTimeOffset to JsonReader New feature - Added ReadAsDecimal to JsonReader New feature - Added covariance to IJEnumerable type parameter New feature - Added XmlSerializer style Specified property support New feature - Added ...ASP .NET MVC CMS (Content Management System): Atomic CMS 2.1.2: Atomic CMS 2.1.2 release notes Atomic CMS installation guide N2 CMS: 2.1: N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. Major Changes Support for auto-implemented properties ({get;set;}, based on contribution by And Poulsen) All-round improvements and bugfixes File manager improvements (multiple file upload, resize images to fit) New image gallery Infinite scroll paging on news Content templates First time with N2? Try the demo site Download one of the template packs (above) and open the proj...Mobile Device Detection and Redirection: 0.1.11.10: IMPORTANT CHANGESThis release changes the way some WURFL capabilities and attributes are exposed to .NET developers. If you cast MobileCapabilities to return some values then please read the Release Note before implementing this release. The following code snippet can be used to access any WURFL capability. For instance, if the device is a tablet: string capability = Request.Browser["is_tablet"]; SummaryNew attributes have been added to the redirect section: originalUrlAsQueryString If se...New Projects[OOBL] Projekt: Projekt iz kolegija Objektno Oblikovanje na Fakultetu Elektrotehnike i Racunarstva u Zagrebu.Aikido Glossary Reader: The Aikido Glossary Reader application makes it easier for Aikido students to search for Japanese terms used in martial arts training.AsyncFunc: AsyncFunc makes it easy to implement Event-based Asynchronous Pattern in .NET.BeijingAgricultureScience: ???????????BizTalk 5010 999 Generation: Create 5010 999 acknowledgement from the default 997 Generated by BizTalk ServerCheck if Knowledge Base fix is installed script: A handy script that checks if a knowledge base fix is installed or not.Coproject - rich project management: Coproject is a sample Silverlight application built on WCF RIA Services and Caliburn.Micro framework. It should demonstrate typical scenarios in business applications.DeskNote: DeskNote, makes taking and displaying a notes a lot easier. Have your notes on your desktop, write your notes in a text file and it will be automatically displayed on the desktop. DriveBackup: Are you tired of losing data? And do you sometimes forget to backup your data? Then this program is right for you, one-time setup with each new removable disk and after that Drive Backup instantly backs up your data in the background, without you pushing a button.ELSEngine XNA Game OS Engine: XNA Game Operating System Engine, designed to handle and make easy to use Interface, Interface assets, game screens, menus, controls, and more. Designed to be adaptable to XBOX or Windows, and to ANY style game.FermaProject: Team Ferma ProjectHalfNetworkNET: HalfNetworkNET makes it easier for <target user group> to <activity>. You'll no longer have to <activity>. It's developed in C++/CLILFS Record: LFS Record is a camera animation and video recording tool for Live for Speed users. It doesn't replace programs like Fraps 100%, but in most cases you'll find LFS Record allows a lot more freedom and control. It's developed in C# using WPF .net 4.MPC HC Web remote: A Web interface for Media Player Classic Home Cinema. Designed especialy for smart phones. Tested on Nokia 5800, but in theory it works on all smart phones with wifi & a browser.MSMS2CMP: Very simple application to swap particular strings (MSMS and CMPD number) in .mgf files (results from Mascot search engine used to identify proteins by mass spectrometry data). This might be a kind of example of using Regex and Text File I/OMy Now Playing to Twitter: A Simple WinForm Program that can get what user is playing in Winamp and send a status to Twitter. It's wrote in VB.Net but some source code is port of MiniTwitter(http://minitwitter.codeplex.com)and uses tagLib-sharp library(https://github.com/mono/taglib-sharp)RPM Header for .NET: RPM Header for .NET allows a developer to access the headers of RPM Package Manager files. It's developed in C#.SilverMenu: SilverMenu brings some of the menu functionality of Silverlight for Windows Phone 7 to the XNA world.Smartgrid Smartmeter GRYD: The GRYD smartgrid and Smartmeter project shows features and capabilities like Demand Response, Smart Home Appliance Load Curtailments, DMS integration with SCADA etc. GRYD, Gryd.org is to teach you the technology, this is only for personal use and not commercial use.WakeMeQt: WakeMeQt is a smart alarm for the Nokia n810 (and probably n800) internet tablets. Using a Nintendo Wii remote as the sensor it monitors your movements during sleep and chooses the optimal time to wake you. It's developed in C++ using the Qt framework.WPF SplitButton & MenuButton: This WPF SplitButton and MenuButton implementation aims to be more robust and visual attractive than the other WPF split buttons available on CodePlex and elsewhere. The code is based on David Anson's implementation made available on his blog.Y2XMas: Merry Chirstmas - Happy New Year 2011 software

    Read the article

  • Static "LoD" hack opinions

    - by David Lively
    I've been playing with implementing dynamic level of detail for rendering a very large mesh in XNA. It occurred to me that (duh) the whole point of this is to generate small triangles close to the camera, and larger ones far away. Given that, rather than constantly modifying or swapping index buffers based on a feature's rendered size or distance from the camera, it would be a lot easier (and potentially quite a bit faster), to render a single "fan" or flat wedge/frustum-shaped planar mesh that is tessellated into small triangles close to the near or small end of the frustum and larger ones at the far end, sort of like this (overhead view) (Pardon the gap in the middle - I drew one side and mirrored it) The triangle sizes are chosen so that all are approximately the same size when projected. Then, that mesh would be transformed to track the camera so that the Z axis (center vertical in this image) is always aligned with the view direction projected into the XZ plane. The vertex shader would then read terrain heights from a height texture and adjust the Y coordinate of the mesh to match a height field that defines the terrain. This eliminates the need for culling (since the mesh is generated to match the viewport dimensions) and the need to modify the index and/or vertex buffers when drawing the terrain. Obviously this doesn't address terrain with overhangs, etc, but that could be handled to a certain extent by including a second mesh that defines a sort of "ceiling" via a different texture. The other LoD schemes I've seen aren't particularly difficult to implement and, in some cases, are a lot more flexible, but this seemed like a decent quick-and-dirty way to handle height map-based terrain without getting into geometry manipulation. Has anyone tried this? Opinions?

    Read the article

  • Create Pivot collections much faster than DeepZoomTools CollectionCreator class

    - by John Conwell
    I've been playing with Microsoft Live Labs Pivot to create a hierarchy of collections all linked together to allow someone to explore a hierarchy of data visually. The problem has been the generation time of the entire hierarchy. I end up creating 500 - 600 collections total and it takes hours and hours using the CollectionCreator class that comes with the DeepZoomTools.  So digging around I found a way to make the actual DeepZoom collection creation wicked fast. Dont use the CollectionCreator!  Turns out Pivot doesnt actually use the image pyramid generated by the CollectionCreator. Or if it does, its only when you open a new collection it shows all the images zooming in. But once the zoom in is complete, Pivot uses the individual DeepZoom images. What Pivot does need is the xml generated by the CollectionCreator, which is in a very simple format.  So what i did was manually generate the xml for the collection image pyramid, and then create the folder structure required (one folder per level of the pyramid), and put a single pixel png file in each folder.  Now, I can create the required files and folders for 500 collections in about 10 seconds. Sweet! Now you still have to use the ImageCreator to create a DeepZoom image for each image in the collection and that still takes some time, but at least the total processing time is way better.

    Read the article

  • pdating modules on VPS [closed]

    - by tertle
    Been trying to install openVPN on a VPS but come into a few problems when trying to start the openvpn server. Service deferred error: IPTablesServiceBase: failed to run iptables-restore [status=1]: ['FATAL: Could not load /lib/modules/2.6.18-028stab070.14/modules.dep: No such file or directory', 'FATAL: Could not load /lib/modules/2.6.18-028stab070.14/modules.dep: No such file or directory', 'iptables-restore: line 46 failed']: internet/base:1175,internet/base:752,internet/process:45,internet/process:306,internet/_baseprocess:48,internet/process:775,internet/_baseprocess:60,svc/pp:116,svc/svcnotify:26,internet/defer:238,internet/defer:307,internet/defer:323,sagent/ipts:105,sagent/ipts:39,util/error:52,util/error:32 service failed to start due to unresolved dependencies: set(['user', 'iptables_openvpn']) service failed to start due to unresolved dependencies: set(['user', 'iptables_openvpn']) service failed to start due to unresolved dependencies: set(['iptables_openvpn']) Anyway so after a bit of playing around and some advice, I found that the linux kernal and modules don't match on my server. uname -r returns: 2.6.18-028stab070.14 and ls /lib/modules returns: 2.6.18-028stab070.7 The server is running OpenVZ and my container uses ubuntu 9.10. So my question is, is it possible for me to update my modules on a VPS and if so how would I do this, or is this something I'll need to try get my host to do? Thanks in advance.

    Read the article

  • Prevent oversteering catastrophe in racing games

    - by jdm
    When playing GTA III on Android I noticed something that has been annoying me in almost every racing game I've played (maybe except Mario Kart): Driving straight ahead is easy, but curves are really hard. When I switch lanes or pass somebody, the car starts swiveling back and forth, and any attempt to correct it makes it only worse. The only thing I can do is to hit the brakes. I think this is some kind of oversteering. What makes it so irritating is that it never happens to me in real life (thank god :-)), so 90% of the games with vehicles inside feel unreal to me (despite probably having really good physics engines). I've talked to a couple of people about this, and it seems either you 'get' racing games, or you don't. With a lot of practice, I did manage to get semi-good at some games (e.g. from the Need for Speed series), by driving very cautiously, braking a lot (and usually getting a cramp in my fingers). What can you do as a game developer to prevent the oversteering resonance catastrophe, and make driving feel right? (For a casual racing game, that doesn't strive for 100% realistic physics) I also wonder what games like Super Mario Kart exactly do differently so that they don't have so much oversteering? I guess one problem is that if you play with a keyboard or a touchscreen (but not wheels and pedals), you only have digital input: gas pressed or not, steering left/right or not, and it's much harder to steer appropriately for a given speed. The other thing is that you probably don't have a good sense of speed, and drive much faster than you would (safely) in reality. From the top of my head, one solution might be to vary the steering response with speed.

    Read the article

  • How should I show shared resources during a Shared Resource game in the Galaxy Editor?

    - by Mag Roader
    One of my favorite ways to play the original StarCraft was in a "Team" game. In this game type, multiple players on the same "team" would share control, resources, supply, and even the same starting location. It was like playing as 1 player, only 2 humans were controlling it. It was a lot of fun. I want to do something very similar in StarCraft 2, but I need to create a custom map in the Galaxy Editor to do it. I found the editor can quite easily emulate this behavior. There is a Trigger action "Set Alliance for Player Group" to "...treat each other as Ally With Shared Vision, Control, And Spending." To use this, I create units for only 1 of the players, and then set all players to be allied with each other in this way. All the other players get no units and no resources. This makes it so 1 player is the actual owner of all the units and everyone else is tagging along with full control. This nearly works! The problem is that if I am not the actual owning player, I can't actually see how many minerals/gas/supply the team has. This makes it pretty difficult to build stuff. What would be the best way to display to the other players how many Minerals/Gas/Supply the team has?

    Read the article

  • What You Said: Where Do You Find Your Next Game?

    - by Jason Fitzpatrick
    Earlier this week we asked you to share your favorite places and tricks for finding new video games to play. It turns out the least of your problems was finding new games! From the comments it became apparent How-To Geek readers had absolutely no problem finding new games to add to their gaming stable. Buzz writes: I have quite an elaborate procedure in finding my next game:For free games i simply follow the feeds on a few websites like Freegamer, LinuxGames, HappyPenguin and Penguspy. Every now and them i browse Wikipedia articles on free/FOSS games. For commercial games the procedure depends on what i enjoyed the most in that game:- If i enjoyed the story or the general feel: i usually start with a game i like and look for sequels, prequels, mods or spinoffs. I even go out on a limb and give other platforms (than a PC) a try, even if it usually means emulation. If you really enjoy a game series/saga it’s usually worth the effort.- If i enjoy the producer/gaming company then i seek out more of their games.- If i enjoy the technical achievements that went into making the game or if i am concerned for the system requirements of my gear i try to play games that are built on the same engine(s) as one of the games i ran smooth and enjoyed.- If i feel like playing a particular genre i usually start with a title i enjoyed and look for alternatives or similar games- You can always try searching for Game of The Year winners for a particular time period or other similar accomplishments. They usually yield great results. How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

    Read the article

  • How to handle multiple effect files in XNA

    - by Adam 'Pi' Burch
    So I'm using ModelMesh and it's built in Effects parameter to draw a mesh with some shaders I'm playing with. I have a simple GUI that lets me change these parameters to my heart's desire. My question is, how do I handle shaders that have unique parameters? For example, I want a 'shiny' parameter that affects shaders with Phong-type specular components, but for an environment mapping shader such a parameter doesn't make a lot of sense. How I have it right now is that every time I call the ModelMesh's Draw() function, I set all the Effect parameters as so foreach (ModelMesh m in model.Meshes) { if (isDrawBunny == true)//Slightly change the way the world matrix is calculated if using the bunny object, since it is not quite centered in object space { world = boneTransforms[m.ParentBone.Index] * Matrix.CreateScale(scale) * rotation * Matrix.CreateTranslation(position + bunnyPositionTransform); } else //If not rendering the bunny, draw normally { world = boneTransforms[m.ParentBone.Index] * Matrix.CreateScale(scale) * rotation * Matrix.CreateTranslation(position); } foreach (Effect e in m.Effects) { Matrix ViewProjection = camera.ViewMatrix * camera.ProjectionMatrix; e.Parameters["ViewProjection"].SetValue(ViewProjection); e.Parameters["World"].SetValue(world); e.Parameters["diffuseLightPosition"].SetValue(lightPositionW); e.Parameters["CameraPosition"].SetValue(camera.Position); e.Parameters["LightColor"].SetValue(lightColor); e.Parameters["MaterialColor"].SetValue(materialColor); e.Parameters["shininess"].SetValue(shininess); //e.Parameters //e.Parameters["normal"] } m.Draw(); Note the prescience of the example! The solutions I've thought of involve preloading all the shaders, and updating the unique parameters as needed. So my question is, is there a best practice I'm missing here? Is there a way to pull the parameters a given Effect needs from that Effect? Thank you all for your time!

    Read the article

  • What could be causing frequent display freezes?

    - by austen
    I just installed Ubuntu 14.04 two days ago (coming from Win8) and in the two days that I've been using it, my display has frozen four or five times. The mouse won't move but the keyboard does respond so I can use the Ctrl+Alt+Bkspc command to fix it. It seems like it might just be the display freezing because one of the times I was watching a Youtube video and the audio continued playing. I have an Nvidia graphics card with the most recent Nvidia drivers for it enabled. I see that a lot of questions about Ubuntu freezing get marked as a duplicate and pretty much always linked back to a thread about what to do when it freezes. Clearly, I've got that bit figured out already and I did read that thread for further advice. What I'm looking for though is how to fix this permanently. output from lspci -nnk | grep -iA2 VGA: 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) Subsystem: Lenovo Device [17aa:2200] Kernel driver in use: i915 Update: JohnnyEnglish pointed out that Ubuntu is using the integrated graphics, not my Nvidia card. It turns out my laptop uses Nvidia Optimus and I cannot enable only the graphics card through the BIOS. I found out about Nvidia Prime and got it set up using this article. The settings panel which allows you to select the graphics says that 'performance mode' is enabled but when I check which graphics controller is enabled through the terminal, it still says it's using the integrated graphics. I'm not sure if this could be causing the freezes but I guess it's a starting point. Any ideas on how to resolve this?

    Read the article

  • Code &amp; Slides &ndash; SDE &ndash; What&rsquo;s new in Silverlight 4

    - by Timmy Kokke
    Last Tuesday the Software Developers Network – SDN organized another SDE. I’ve had the opportunity to present a session about Silverlight 4. I talked about lots of new features in Silverlight 4 and Expression Blend 4, focused on the Out-Of-Browser features.     The slides of my presentation can be downloaded here.   In my presentation I demonstrated a couple of features from my new pet project “SilverAmp”. This project is based on the legendary WinAmp, but made entirely in Silverlight. I use it to try out many new Silverlight 4 features. It’s not finished yet, but useful already. It runs outside the browser with elevated trust. It reads your local MyMusic folder and uses the TagLib library to read the ID3 tags of the mp3s it finds. SilverAmp is using MEF for extensibility. It uses a custom Window Chrome, designed in Expression Design. And it shows a notification window when a new song starts to play.   In the future it is going to get song information from Last.FM, will be able to show YouTube videos inside itself and it will tweet about what you are playing. The project will be fully documented to function as a reference implementation for the new Silverlight 4 features.   You can download the source on  http://SilverAmp.codeplex.com   Below are two screenshot of SilverAmp.                     If you have any questions, comments,  issues or feature requests let me know.

    Read the article

  • strange behavior in Box2D+LibGDX when applying impulse

    - by Z0lenDer
    I have been playing around with Box2D and LibGDX and have been using a sample code from DecisionTreeGames as the testing ground. Now I have a screen with four walls and a rectangle shape, lets call it a brick. When I use applyLinearImpulse to the brick, it starts bouncing right and left without any pattern and won't stop! I tried adding friction and increasing the density, but the behavior still remains the same. Here are some of the code that might be useful: method for applying the impulse: center = brick.getWorldCenter(); brick.applyLinearImpulse(20, 0, center.x, center.y); Defining the brick: brick_bodyDef.type = BodyType.DynamicBody; brick_bodyDef.position.set(pos); // brick is initially on the ground brick_bodyDef.angle = 0; brick_body = world.createBody(brick_bodyDef); brick_body.setBullet(true); brick_bodyShape.setAsBox(w,h); brick_fixtureDef.density = 0.9f; brick_fixtureDef.restitution = 1; brick_fixtureDef.shape = brick_bodyShape; brick_fixtureDef.friction=1; brick_body.createFixture(fixtureDef); Walls are defined the same only their bullet value is set to false I would really appreciate it if you could help me have a change this code to have a realistic behavior (i.e. when I apply impulse to the brick it should trip a few times and then stop completely).

    Read the article

  • Profit : August, 2012

    - by user462779
    August 2012 issue of Profit is now available online. Way back in 2003, I wrote my first feature for Profit. It was titled “Everything You Always Wanted to Know About Application Servers (But Were Afraid To Ask),” and it discussed “cutting-edge” technologies like portals and XML and the brand-new Java Platform, Enterprise Edition (Java EE; we’re now on Java EE 7). But despite the dated terms I used in my Profit debut, I noticed something in rereading that old story that has stayed constant: mid-tier technology is where innovative enterprise IT projects happen. It may have been XML in 2003, but it’s SOA in 2012. While preparing the August issue of Profit was more than just a stroll down memory lane for me, it has provided a nice bit of perspective about what changes and what doesn’t in this dynamic IT industry. Technologies continuously evolve—some become standard practice, some are revived or reinvented, and some are left by the wayside. But the drive to innovate and the desire to succeed are business principles that never go out of fashion. Also, be sure to check out the Profit JD Edwards Special Issue 2012 (PDF), featuring partner profiles, customer successes, and Oracle executive interviews. The Middleware Advantage Three ways a flexible, integrate software layer can deliver a competitive edge Playing to Win Electronic Arts’ superefficient hub processes millions of online gaming transactions every day. Adjustable Loans With Oracle Exadata, Reliance Commercial Finance keeps pace with India’s commercial loan market. Future Proof To keep pace with mobile, social, and location-based services, smart technologists are using middleware to innovate. Spring Training Knowledge and communication help Jackson Hewitt’s Tim Bechtold get seasonal workers in top shape. Keeping Online Customers Happy Customers worldwide are comfortable with online service—but are companies meeting customers’ needs?

    Read the article

  • Bomberman clone, how to do bombs?

    - by hustlerinc
    I'm playing around with a bomberman clone to learn game-developement. So far I've done tiles, movement, collision detection, and item pickup. I also have pseudo bombplacing (just graphics and collision, no real functionality). I've made a jsFiddle of the game with the functionality I currently have. The code in the fiddle is very ugly though. Scroll past the map and you find how I place bombs. Anyway, what I would like to do is an object, that has the general information about bombs like: function Bomb(){ this.radius = player.bombRadius; this.placeBomb = function (){ if(player.bombs != 0){ // place bomb } } this.explosion = function (){ // Explosion } } I don't really know how to fit it into the code though. Everytime I place a bomb, do I do var bomb = new Bomb(); or do i need to constantly have that in the script to be able to access it. How does the bomb do damage? Is it as simple as doing X,Y in all directions until radius runs out or object stops it? Can I use something like setTimeout(bomb.explosion, 3000) as timer? Any help is appreciated, be it a simple explanation of the theory or code examples based on the fiddle. When I tried the object way it breaks the code.

    Read the article

  • Developing games using virtualization on macOS (or Linux) [on hold]

    - by zpinner
    From what I've seen, most of the gamedev tools and engines (that could generate cross platform games) are not supported on Mac. Havok/Project Anarchy, UDK, GameMaker, e.g. . Basically, the only options I found are: Unity3d and monogame + xamarin. Unity is nice and I've been playing with it for some time, but the free version is quite limited when we're talking about shaders, that made me consider that as an indie developer, I might want more freedom to experiment new things, without paying the expensive unity license. I didn't try monogame + xamarin yet, and altough XNA is a very nice game framework, I'd like to have more freedom to experiment and finish a game first before paying for the IDE, which is not possible with the current Xamarin business model. That leaves me with the thought that I must go back to windows, which I'd preferably do it partially, if it's possible. Using BootCamp is something that I'd like to avoid, since it's a pain to reboot when changing OS and that would probably force me to become a 100% windows user. Is there anyone actually developing a game using virtualization solutions like parallels or vmwareFusion? How was your experience?

    Read the article

  • links for 2011-01-03

    - by Bob Rhubart
    Using Solaris zfs + iscsi targets with Oracle VM (Wim Coekaerts Blog) "I was playing with my Oracle VM setup and needed some shared storage that was block based. I did not have a storage array available but I did have a Solaris box, that I use for Oracle VDI, available." - Wim Coekaerts (tags: oracle otn solaris oraclevm virtualization) DanT's GridBlog: Oracle Grid Engine: Changes for a Bright Future at Oracle "Today, we are entering a new chapter in Oracle Grid Engine’s life. Oracle has been working with key members of the open source community to pass on the torch for maintaining the open source code base to the Open Grid Scheduler project hosted on SourceForge." - Dan Templeton (tags: oracle gridengine) Oracle Fusion Middleware Security: How do I secure my services? "I've been up early for a couple of days talking to a customer about how they should secure their services,' says Chris Johnson. "I'm going to tell you what I told them." (tags: oracle fusionmiddleware security) OldSpice your Innovation - Dangers of Status Quo E2.0 | Enterprise 2.0 Blogs "If organizations only leverage E2.0 technologies in a 'me too' fashion, they are essentially using a bucket to bail water from a leaking ship." - John Brunswick (tags: oracle enteprise2.0) The Aquarium: GlassFish in 2011 - What to expect A look into the Glassfish crystal ball... (tags: oracle glassfish) Andrejus Baranovskis's Blog: Fusion Middleware 11g Security - Retrieve Security Groups from ADF 11g Oracle ACE Director Andrejus Baranovskis shows you what to do when you need to access security information directly from an ADF 11g application. (tags: oracle otn fusionmiddleware security adf) @eelzinga: Book review : Oracle SOA Suite 11g R1 Developer's Guide "What I really liked in this book...was the compare/description of the Oracle Service Bus. The authors did a great job on describing functionality of components existing in the SOA Suite and how to model them in your own process." - Oracle ACE Eric ElZinga (tags: oracle oracleace soa bookreview soasuite)

    Read the article

  • How to Enable User-Specific Wireless Networks in Windows 7

    - by The Geek
    Wireless network settings in Windows 7 are global across all users, but there’s a little-known option that lets you switch them to per-user, so each user has access to only the networks they are allowed to connect to. Here’s how it all works. How is this useful? Maybe you want to prevent a particular user from accessing the internet—if you don’t give them the wireless password, they won’t be able to get online. This could be very useful if you’ve got mini-people playing games on the family PC, but you don’t want them getting online Latest Features How-To Geek ETC How to Enable User-Specific Wireless Networks in Windows 7 How to Use Google Chrome as Your Default PDF Reader (the Easy Way) How To Remove People and Objects From Photographs In Photoshop Ask How-To Geek: How Can I Monitor My Bandwidth Usage? Internet Explorer 9 RC Now Available: Here’s the Most Interesting New Stuff Here’s a Super Simple Trick to Defeating Fake Anti-Virus Malware The Citroen GT – An Awesome Video Game Car Brought to Life [Video] Final Man vs. Machine Round of Jeopardy Unfolds; Watson Dominates Give Chromium-Based Browser Desktop Notifications a Native System Look in Ubuntu Chrome Time Track Is a Simple Task Time Tracker Google Sky Map Turns Your Android Phone into a Digital Telescope Walking Through a Seaside Village Wallpaper

    Read the article

  • MPlayer does not work

    - by Soham Pal
    Using the xubuntu desktop, on Ubuntu Raring updated from Quantal. MPlayer never really worked. No video, no audio, nothing. I really can't be any more helpful, so here's the log: petey@home-pc:~$ mplayer "/home/petey/Downloads/Polar Bear Cafe (480p)HorribleSubs]/[HorribleSubs] Polar Bear Cafe - 01 [480p].mkv" MPlayer SVN-r35984-4.7 (C) 2000-2013 MPlayer Team Playing /home/petey/Downloads/Polar Bear Cafe (480p)[HorribleSubs]/[HorribleSubs] Polar Bear Cafe - 01 [480p].mkv. libavformat version 55.0.100 (internal) libavformat file format detected. [lavf] stream 0: video (h264), -vid 0 [lavf] stream 1: audio (aac), -aid 0 [lavf] stream 2: subtitle (ass), -sid 0 VIDEO: [H264] 848x480 0bpp 23.810 fps 0.0 kbps ( 0.0 kbyte/s) Clip info: creation_time: 2012-04-05 21:36:10 Load subtitles in /home/petey/Downloads/Polar Bear Cafe (480p)[HorribleSubs]/ Can't open /dev/fb0: Permission denied [fbdev2] Can't open /dev/fb0: Permission denied VO: [v4l2] No such file or directory vo_cvidix: No vidix driver name provided, probing available ones (-v option for details)! [cyberblade] Error occurred during pci scan: Operation not permitted [mach64] Error occurred during pci scan: Operation not permitted [mga] Error occurred during pci scan: Operation not permitted [mga] Error occurred during pci scan: Operation not permitted [nvidia_vid] Error occurred during pci scan: Operation not permitted [pm3] Error occurred during pci scan: Operation not permitted [radeon] Error occurred during pci scan: Operation not permitted [rage128] Error occurred during pci scan: Operation not permitted [s3_vid] Error occurred during pci scan: Operation not permitted [SiS] Error occurred during pci scan: Operation not permitted [unichrome] Error occurred during pci scan: Operation not permitted [VO_SUB_VIDIX] Couldn't find working VIDIX driver. ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family libavcodec version 55.0.100 (internal) Selected video codec: [ffh264] vfm: ffmpeg (FFmpeg H.264) ========================================================================== ========================================================================== Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 44100 Hz, 2 ch, floatle, 0.0 kbit/0.00% (ratio: 0->352800) Selected audio codec: [ffaac] afm: ffmpeg (FFmpeg AAC (MPEG-2/MPEG-4 Audio)) ========================================================================== [AO OSS] audio_setup: Can't open audio device /dev/dsp: No such file or directory DVB card number must be between 1 and 4 AO: [null] 44100Hz 2ch floatle (4 bytes per sample) Starting playback... Movie-Aspect is 1.78:1 - prescaling to correct movie aspect. VO: [null] 848x480 = 854x480 Planar YV12 A: 4.7 V: 4.7 A-V: 0.002 ct: 0.083 0/ 0 22% 0% 0.5% 0 0 MPlayer interrupted by signal 2 in module: sleep_timer A: 4.7 V: 4.7 A-V: 0.001 ct: 0.083 0/ 0 21% 0% 0.5% 0 0 Exiting... (Quit)

    Read the article

  • XSF-FO intellisense and national languages with Apache FOP

    - by Lukasz Kurylo
    Some time ago I showed how to get an intellisense and how to configure the FO.NET to acquire national characters inside the generated pdf files. Due to the limitations that I mensioned in my previous post, I started playing with the Apache FOP. In this post I want to show, how to acquire the same result as I showed in the two posts related to FO.NET.   Intellisense   To get the intellisense from the XSL-FO templates set the xsi:schemaLocation the same way I showed it in this post. The only diffrence to FO.NET is that, during generating the document by the code I showed last time we will get an exception:   org.apache.fop.fo.ValidationException: Invalid property encountered on "fo:root": xsi:schemaLocation (See position 6:11)   Fortunatelly there is a very easy way to resolve this without removing the entire attribute along with the intellisense. Add to the FopFactory the ignoreNamespace by:   FopFactory fopFactory = FopFactory.newInstance(); fopFactory.ignoreNamespace(http://www.w3.org/2001/XMLSchema-instance);   Notice that, the url specified in this method this is a namespace for the xmlns:xsi namespace, not xsi.schemaLocation.   Fonts / national characters   This point is a little dfferent to acquire, but not more complicated that it was with FO.NET. To set the fonts in Apache FOP 1.0, we need a configuration file. A sample one can be get from the directory where we unpacked the fop binaries, from conf subdirectory. There is a file called fop.xconf. We must copy this file to our solution. In the simplest way, in the <fonts> tag we can add  <auto-detect/>. Thanks to this, FOP will index all fonts available on the installed operating system. There probably should be no problem, if we have a http handler or a WCF Service on the server that serves the generated pdf documents. In this situation we can use all available fonts on this server.   To use this config file, we must set a path to it:   FopFactory fopFactory = FopFactory.newInstance(); fopFactory.setUserConfig(new File("fop.xconf"));

    Read the article

  • What did programmers do before variable scope, where everything is global?

    - by hydroparadise
    So, I am having to deal with seemingly archiac language (called PowerOn) where I have a main method, a few datatypes to define variables with, and has the ability to have sub-procedures (essentially void methods) that does not return a type nor accepts any arguements. The problem here is that EVERYTHING is global. I've read of these type of languages, but most books take the aproach "Ok, we use to use a horse and cariage, but now, here's a car so let's learn how to work on THAT!" We will NEVER relive those days". I have to admit, the mind is struggling to think outside of scope and extent. Well here I am. I am trying to figure out how to best manage nothing but global variables across several open methods. Yep, even iterators for for loops have to be defined globaly, which I find myself recycling in different parts of my code. My Question: for those that have this type experience, how did programmers deal with a large amount of variables in a global playing field? I have feeling it just became a mental juggling trick, but I would be interested to know if there were any known aproaches.

    Read the article

  • Should I expect my team to have more than a basic proficiency with our source control system?

    - by Joshua Smith
    My company switched from Subversion to Git about three months ago. We had weeks of advance notice prior to the switch. Since I'd never used Git before (or any other DVCS), I read Pro Git and spent a little time spinning up my own repositories and playing around, so that when we switched I'd be able to keep working with minimal pain. Now I'm the 'Git guy' by default. With a couple of exceptions, most of my team still has no idea how Git works. For example, they still think of branches as complete copies of the source code, and even go so far as to clone the repo into multiple folders (one per branch). They generally look at Git as a scary black box. Given the fundamental nature of source control in our daily work (not to mention the ridiculous amount of power Git affords us), I'm of the opinion that any dev who doesn't achieve a certain level of proficiency with it is a liability. Should I expect my team to have at least some understanding of how Git works internally, and how to use it beyond the most basic pull/merge/push operations? Or am I just making something out of nothing?

    Read the article

  • CodePlex Daily Summary for Saturday, March 24, 2012

    CodePlex Daily Summary for Saturday, March 24, 2012Popular Releasesmenu4web: menu4web 0.0.3: menu4web 0.0.3Craig's Utility Library: Craig's Utility Library 3.1: This update adds about 60 new extension methods, a couple of new classes, and a number of fixes including: Additions Added DateSpan class Added GenericDelimited class Random additions Added static thread friendly version of Random.Next called ThreadSafeNext. AOP Manager additions Added Destroy function to AOPManager (clears out all data so system can be recreated. Really only useful for testing...) ORM additions Added PagedCommand and PageCount functions to ObjectBaseClass (same as M...SQL Monitor - managing sql server performance: SQLMon 4.2 alpha 14: 1. improved accuracy of logic fault checking in analysisMapWindow 6 Desktop GIS: MapWindow 6.1.1: MapWindow 6 Desktop GIS is an open source desktop GIS for Microsoft Windows that is built upon the DotSpatial Library. This release requires .Net 4 (Client Profile). Are you a software developer?Instead of downloading MapWindow for development purposes, get started with with the DotSpatial templateDotSpatial: DotSpatial 1.1: This is a Minor Release. See the changes in the issue tracker. Minimal -- includes DotSpatial core and essential extensions Extended -- includes debugging symbols and additional extensions Just want to run the software? End user (non-programmer) version available branded as MapWindow Want to add your own feature? Develop a plugin, using the template and contribute to the extension feed (you can also write extensions that you distribute in other ways). Components are available as NuGet pa...Indiefreaks Game Framework: 0.9.2.0: Feature: Added SunBurn engine v2.0.18.7 support (doesn't support versions below). Feature: Added GammaCorrection Post processor to allow developers or even players to tweak the Gamma of the game depending on their screen (courtesy of bamyazi) Feature: Added Windows, Xbox 360 & WP7 enabled StorageManager (based on Nick Gravelyn's EasyStorage) to read/write files for player or game data. Feature: Added VirtualGamePad feature for WP7 allowing developers to define Touch areas on screen and mapped...Code for Rapid C# Windows Development eBook + LINQPad and Data Tools: LLBLGen LINQPad Data Context Driver Version 2.1: Sixth release of a LLBLGen Pro Typed Data Context Driver for LINQPad. For LLBLGen Pro versions 3.1 and 3.5(coming). New features:When you switch the query language to SQL, LINQPad updates the Schema Explorer to show SQL column names rather than CLR property names Connection dialog unloads assemblies when it has closed down so they are no longer locked - this allows them to be rebuilt while LINQPad is still open Connection dialog includes a button to quickly add assemblies needed for the...People's Note: People's Note 0.40: Version 0.40 adds an option to compact the database from the profile screen. Compacting a database can make it smaller and faster by removing empty spaces left over by editing, moving, and deleting notes. To install: copy the appropriate CAB file onto your WM device and run it.Microsoft All-In-One Code Framework - a centralized code sample library: C++, .NET Coding Guideline: Microsoft All-In-One Code Framework Coding Guideline This document describes the coding style guideline for native C++ and .NET (C# and VB.NET) programming used by the Microsoft All-In-One Code Framework project team.WebDAV for WHS: Version 1.0.67: - Added: Check whether the Remote Web Access is turned on or not; - Added: Check for Add-In updates;Image 3D Viewer: Image 3D Viewer: WPF .Net 3.5 .Net 4 .Net 4.5Phalanger - The PHP Language Compiler for the .NET Framework: 3.0 (March 2012) for .NET 4.0: March release of Phalanger 3.0 significantly enhances performance, adds new features and fixes many issues. See following for the list of main improvements: New features: Phalanger Tools installable for Visual Studio 2011 Beta "filter" extension with several most used filters implemented DomDocument HTML parser, loadHTML() method mail() PHP compatible function PHP 5.4 T_CALLABLE token PHP 5.4 "callable" type hint PCRE: UTF32 characters in range support configuration supports <c...Nearforums - ASP.NET MVC forum engine: Nearforums v8.0: Version 8.0 of Nearforums, the ASP.NET MVC Forum Engine, containing new features: Internationalization Custom authentication provider Access control list for forums and threads Webdeploy package checksum: abc62990189cf0d488ef915d4a55e4b14169bc01 Visit Roadmap for more details.BIDS Helper: BIDS Helper 1.6: This beta release is the first to support SQL Server 2012 (in addition to SQL Server 2005, 2008, and 2008 R2). Since it is marked as a beta release, we are looking for bug reports in the next few months as you use BIDS Helper on real projects. In addition to getting all existing BIDS Helper functionality working appropriately in SQL Server 2012 (SSDT), the following features are new... Analysis Services Tabular Smart Diff Tabular Actions Editor Tabular HideMemberIf Tabular Pre-Build ...Json.NET: Json.NET 4.5 Release 1: New feature - Windows 8 Metro build New feature - JsonTextReader automatically reads ISO strings as dates New feature - Added DateFormatHandling to control whether dates are written in the MS format or ISO format, with ISO as the default New feature - Added DateTimeZoneHandling to control reading and writing DateTime time zone details New feature - Added async serialize/deserialize methods to JsonConvert New feature - Added Path to JsonReader/JsonWriter/ErrorContext and exceptions w...SCCM Client Actions Tool: SCCM Client Actions Tool v1.11: SCCM Client Actions Tool v1.11 is the latest version. It comes with following changes since last version: Fixed a bug when ping and cmd.exe kept running in endless loop after action progress was finished. Fixed update checking from Codeplex RSS feed. The tool is downloadable as a ZIP file that contains four files: ClientActionsTool.hta – The tool itself. Cmdkey.exe – command line tool for managing cached credentials. This is needed for alternate credentials feature when running the HTA...WebSocket4Net: WebSocket4Net 0.5: Changes in this release fixed the wss's default port bug improved JsonWebSocket supported set client access policy protocol for silverlight fixed a handshake issue in Silverlight fixed a bug that "Host" field in handshake hadn't contained port if the port is not default supported passing in Origin parameter for handshaking supported reacting pings from server side fixed a bug in data sending fixed the bug sending a closing handshake with no message which would cause an excepti...SuperWebSocket, a .NET WebSocket Server: SuperWebSocket 0.5: Changes included in this release: supported closing handshake queue checking improved JSON subprotocol supported sending ping from server to client fixed a bug about sending a closing handshake with no message refactored the code to improve protocol compatibility fixed a bug about sub protocol configuration loading in Mono improved BasicSubProtocol added JsonWebSocketSessionSurvey™ - web survey & form engine: Survey™ 2.0: The new stable Survey™ Project 2.0.0.1 version contains many new features like: Technical changes: - Use of Jquery, ASTreeview, Tabs, Tooltips and new menuprovider Features & Bugfixes: Survey list and search function Folder structure for surveys New Menustructure Library list New Library fields User list and search functions Layout options for a survey with CSS, page header and footer New IP filter security feature Enhanced Token Management New Question fields as ID, Alias...Speed up Printer migration using PrintBrm and it's configuration files: BRMC.EXE: Run the tool from the extracted directory of the printbrm backup. You can use the following command to extract a backup file to a directory - PRINTBRM.EXE -R -D C:\TEMP\EXPAND -F C:\TEMP\PRINTERBACKUP.PRINTEREXPORTNew ProjectsAsp.NET Url Router: 1.Url rewritting. 2.Provider regex matcher 3.Support custom url validate handler.BC-Web: ch projectCape: Dynamically generates Capistrano recipes for Rake tasks.cstgamebgs: Project for wp7GCalculator: GCalculator for performing basic arithmetic operations. Windows Sidebar Gadget invacc: Invacc- for inventory and Account Onlineirgsh-node: Worker nodes of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/irgsh-repo: Repository manager node of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/irgsh-web: Web interface and task manager of BlankOn Package Factory - http://irgsh.blankonlinux.or.id/Kinect Explorer For SharePoint 2010: Kinect Explorer for SharePoint is a tool which provide Natural User Interface to browse through SharePoint sites. Use body gestures to browse, read, move, copy documents. Use Speech services to read-out the files.MCU: mcu devMVC3ShellCode: MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode MVC3ShellCode NetWatch: NetWatch - network watchdog Small application primary designed for network connectivity monitoring. You can configure set of network tests (ping, http, ...) and time plan for this tests. Application is running in windows notification area and notife you each problem. NMortgage: The goal of this project will be to give a prospective home buyer or an existing home owner the insight they need to explore effects of different repayment strategies or different mortgage structures. Nucleo.NET MVP: The Nucleo MVP framework provides a Model-View-Presenter approach that isn't obtrusive, can be utilized in multiple environments, and is versatile. Providing a lot of features you see in other frameworks, the Nucleo MVP framework provides many extensibility points, pretty much allowing you to rewrite most of the framework. It features dynamic injection support, presenter and view initializers (like what you see in ASP.NET MVC), model property injection, attribute- and convention-based vie...P2PShare: This project is to build a new and moden System for p2p file shearing supporting downloads from HTTP, HTTPS, FTP support for P2Pshare client list servers so files can point to a server or a host only file so no servers are used and only p2p is usedPipeLayer: proyecto de sistemas inteligentespython-irgsh: Python library for BlankOn Package Factory - http://irgsh.blankonlinux.or.id/RamGec XNA Controls - Window Elements Library for XNA Solutions: Lightweight, ultra-high performance and flexible library for displaying and managing Window Controls for XNA system. Features its own Window Designer for creating custom windows and controls.RPG Character Generators and Tools: Various tools for pen and paper style role playing games.Screen scraper: A program that can be used to download public domain MP3 and other media such as pdf documents.SharePoint Bdc request library: The given set of classes simplifies an access to the external data, which can be reached through BDC. The library allows to make simple requests for values from external data source, using a BDC Entity Instance Identifier(s) or a value of a certain BDC Entity field. Developed to interact with Business Data Connectivity of SharePoint 2010.testtom03232012git01: testtom03232012git01testtom03232012git02: testtom03232012git02the north star uc: University projectTyphon: Typhon is a role playing simulation management application, much like Nova, but written in MVC/C#.VRE LabTrove-SharePoint connector: The VRE LabTrove-SharePoint Connector provides a means of integrating the ability to view, post to, and edit posts stored in a LabTrove electronic laboratory notebook from within the familiar environment of Microsoft SharePoint. Once installed and configured, these Web Parts give SharePoint users a straightforward way to interact with any LabTrove installation that they wish to use. They also facilitate users to attach data that is stored in a SharePoint Document Library to the LabTrove posts...

    Read the article

< Previous Page | 72 73 74 75 76 77 78 79 80 81 82 83  | Next Page >