existing records - Page 77

Help me exorcise my demon possessed logon script

- by Detritus Maximus

I have a user logon script that copies a file over to a subfolder of the current user's profile path: Script (only showing the line that isn't working): copy /Y c:\records\javasettings_Windows_x86.xml "%USERPROFILE%\Application Data\OpenOffice.org\3\user\config">>c:\records\OOo3%USERNAME%.txt 2>&1 To diagnose why it wasn't working, I did a somelogfile.log parameter on the group policy script and found that what the above command is translating to is this: C:\WINDOWS>copy /Y c:\records\javasettings_Windows_x86.xml "C:\Documents and Settings\test2\Application Data\OpenOffice.org\3\user\config" 1>>c:\records\OOo3test2.txt 2>&1 So the question is, how do I get rid of (exorcise) the " 1" in that line? Update 1: So the reason the script wasn't working was that the creator didn't have any permissions on the directory. I fixed the permissions, and now the file works but! I still have the " 1" showing on all the logs and would like to know why.

Read the article

Unable to telnet out on port 25 on windows server 2008

- by NickGPS

Hi All, I just setup a Windows 2008 R2 server and am trying to get a basic mail server up and running so that I can send emails from my applications. I setup a virtual SMTP server in IIS6 and tried doing a local telnet to port 25, which seemed to work fine. There were no errors during this stage and I can see the mail message appear in the Queue folder. The problem is that mail never leaves the Queue folder. I then tried to telnet to a remote mail server on port 25 but couldn't connect:- telnet 209.85.227.27 25 Could not open connection to the host, on port 25: Connection failed) I checked my firewall and there is a default setting to allow all outgoing TCP traffic with no restriction. I even setup a specific rule for outgoing port 25 traffic but to no avail. I then ran a SmtpDiag.exe command .\SmtpDiag.exe [email protected] [email protected] and received the following output Searching for Exchange external DNS settings. Computer name is WIN-SERVERNAME. Failed to connect to the domain controller. Error: 8007054b Checking SOA for gmail.com. Checking external DNS servers. Checking internal DNS servers. SOA serial number match: Passed. Checking local domain records. Checking MX records using TCP: gmail.com. Checking MX records using UDP: gmail.com. Both TCP and UDP queries succeeded. Local DNS test passed. Checking remote domain records. Checking MX records using TCP: gmail.com. Checking MX records using UDP: gmail.com. Both TCP and UDP queries succeeded. Remote DNS test passed. Checking MX servers listed for [email protected]. Connecting to gmail-smtp-in.l.google.com [209.85.227.27] on port 25. Connecting to the server failed. Error: 10060 Failed to submit mail to gmail-smtp-in.l.google.com. Is there any other diagnostics I can do to figure out if it's my firewall or something else? I have removed antivirus to make sure that it wasn't causing the problem. Any ideas would be much appreciated.

Read the article

Criteria strings, how many different criteria can be entered to retrieve specific data?

- by Janet

For our membership database we are currently using an old DOS program "Arclist". The program is old but the one feature we desperately need in a database program is to be able to enter multiple criteria at one time for more of a "one time" extraction of the data meeting all the various criteria entered in what I call a "criteria string". An example may be extracting only those records with zip codes matching (67893, 54235, 54323, 54201, 54302, 54303, 54301, 67894, 67895). Another set of criteria might be to omit records, not equal to, one type of criteria in one field and also extract records matching criteria in another field. So we would want records "not equal to" in one field, but whose information equals requested information in another field.

Read the article

How to set up hosting on Heroku and email forwarders on a WHM (cPanel)?

- by matija

Read the article

Is domain-transfer inherently safe for downtime when the name servers remain the same?

- by jlmt

I've been reading around this topic towards understanding whether there's some or no chance of downtime during an upcoming domain transfer for 15 live and very critical domains. In our case there are three companies involved: CompanyA is the original registrar and DNS host, CompanyB is the new DNS host, and CompanyC is the new registrar. I've already changed the nameservers for all domains to those of CompanyB. We suffered some downtime because CompanyA deleted their hosted DNS for our domains directly after the change, but the changes propagated and we're now able to configure our DNS with CompanyB. From what I understand (please correct where wrong!): There exists an SOA record that points oneofourdomains.com to ns.companyb.com. That record is maintained and authoritatively hosted by the ccTLD registry for the domain (eg. Verisign for .com). CompanyA currently has the ability to change the SOA record because they're the registrar. There exist NS records for oneofourdomains.com, which are also related to the link from domain name to nameserver, are similarly hosted by the ccTLD, and which CompanyA are also able to change while acting as registrar. Neither CompanyB nor CompanyC currently have any control over the SOA or NS records. CompanyA are unable to cause us (DNS) problems during the transfer by dropping service early, because they are not the authoritative source for the SOA and NS records. When we transfer the domains, it's administrative control of the SOA and NS records that will be transferred to CompanyC. As long as we advise CompanyC that the SOA and NS records must not change (as regards pointing to CompanyB's nameservers), there's no need for any kind of DNS change, and therefore no possibility of downtime. Is my understanding of this correct? My fear is that CompanyA will somehow cut us off again, and their support dept hasn't given me much confidence in their understanding of the topic.

Read the article

Why did I loose access to the mailboxes on my old web/mail host after changing to a new one but keeping old MX values

- by LaserBeak

So I changed the NS records with registrar to point at the new webhosts DNS servers and edited the SOA record there, deleting the new hosts default MX records and instead putting in the old ones for the old web\mail hosts. The website A record is however pointing at the new webhosts servers and the site comes up fine. But none of this should cause me to loose access to mailboxes on my old hosts mail server right? I log into the control panel on the old host, all the mailboxes are there, all the passwords are fine but I can't log in using either webmail or pop3, says incorrect log-in/password. I even created a new mailbox and password for it respectively, but it would not let me log in. For what its worth I did not change\delete the records for 'A' on the old webhost zone file, since I am not hosting the site with them anymore and NS records are pointing to other hosts DNS servers/zone file so that shouldn't matter right? The old hosts mailserver is also not simply down, I can tell because through the control panel I setup a mail forward for one of the existing inboxes and when sending mail to it, it receives it and forwards it fine. So from this I can deduce that I have correctly inputted the old hosts MX records into the zone file hosted on the new hosts DNS and the mail is being sent to the old hosts mail server(s) and is successfully forwarded by it. But why can't I log into those account/inboxes anymore ?

Read the article

coverting existin flash with cakephp website into mobile version

- by jpramod4u

How to convert the existing flash site into mobile version existing site in form of the cakephp frame work. We thought that html ,css,php,javascript may work all mobiles.We dont know exactly. Please tell us how many possible way to develop existing site into mobile version and also need to detect the from which browser the request is coming whether mobile browser or pc browser. The existing site link is :This site convert into mobile version

Read the article

I'm writing a diagnostic app for iOS that loads a predetermined set of webpages and records the time it takes for the page to render on the device.

- by user1754840

I'm writing a sort of diagnostic app for iOS that opens a predetermined list of websites and records the elapsed time it takes each to load. I have the app open a UIWebView within a ViewController. Here are the important bits of the ViewController source: - (void)viewDidLoad { [super viewDidLoad]; DataClass *obj = [DataClass getInstance]; obj.startOfTest = [NSDate date]; //load the first webpage NSString *urlString = [websites objectAtIndex:obj.counter]; //assume firstWebsite is already instantiated and counter is initially set to zero obj.counter = obj.counter + 1; NSURL *url = [NSURL URLWithString:urlString]; NSURLRequest *request = [NSURLRequest requestWithURL:url]; [obj.websiteStartTimes addObject:[NSDate date]]; [webView loadRequest:request]; } - (void)webViewDidFinishLoading:(UIWebView *)localWebView{ DataClass *obj = [DataClass getInstance]; //gets 'global' variables if(!webView.loading){ NSString *urlString = [websites objectAt:obj.counter]; obj.counter = obj.counter + 1; NSURL *url = [NSURL URLWithString:urlString]; NSURLRequest *request = [NSURLRequest requestWithURL:url]; [obj.websiteStartTimes addObject:[NSDate date]]; [webView loadRequest:request]; } The problem with this code is that it seems to load the next website before the one before it has finished. I would have thought that both the call to webViewDidFinishLoading AND the if statement within that would ensure that the website would be done, but that's not the case. I've noticed that sometimes, a single website will invoke the didFinishLoading method more than once, but it would only enter the if statement once. For example, if I have a list of ten websites, the webView would only really show the 3rd and the 6th website on the list and then indicate that it was "done" rendering them all. What else can I do to ensure that a website is done loading completely and rendered to the screen before the app moves on to the next one?

Read the article

Weird entry for robots.txt on a Naked Domain in Google Webmaster Tools

- by Metalshark

We own a .co.uk address and use an Internet hosting company that has made mistakes around DNS in the past. Our main site is hosted on www. and their reluctance to allow editing of AAAA records on-line means our naked domain does not resolve. Currently when we attempt to reach the naked version there is no entry for the browser to go to and it displays an unreachable page (nslookup just says Name: name of domain with no further entries such as an IP or Canonical Name). We recently added the relevant TXT records to verify us to view both the www. version and the naked version of the domain in Google Webmaster Tools (in anticipation of the requests to our Internet host coming to fruition). Imagine our shock when double checking the Site configuration Crawler access and finding a (admittedly failing) robots.txt with a dynamically generated HTML page (full of crude pop-up JavaScript) with references to 3 of our most prominent competitors. What could cause this to happen? As we are in the UK I am assuming some DNS server is serving Google bad information. We are going to contact the Internet hosting company to fix our A and AAAA records once and for all, then check that they work in the US (using something like OpenDNS). Should we be doing more though, for instance informing Google (through Webmaster Tools) that we are now aware there is something currently wrong with our naked domain? UPDATE: We have fixed our A records (not AAAA) and that has resolved the issue. But if there are further actions we should take for effectively having a parking page hosted on our active visitor-heavy, SEO-rich domain that advertised our competitors to US visitors, what would they be?

Read the article

DNS: forward part of a managed domain to one host, but sub domain services to another (Google Apps)

- by Paul Zee

I was going to post this as a comment against DNS: Forward domain to another host, but I don't seem able to do that. I'm in a similar situation. I have a DNS registered/managed by enom, except with the slight twist that the domain was originally registered with enom through a Google Apps account creation. The domain currently supports a Google Apps site/account. I now want to direct the bare primary domain and www entries to a hosting provider for the website component, but leave the Google Apps setup intact for its services such as calendar, mail etc. For now, I'm leaving the domain managed by enom. Also note that when I registered my account with the hosting provider, I gave the same domain name as the existing domain (e.g. example.com), so at their end I'm working with the same domain name in cpanel, etc. In my case, the existing enom DNS entries don't have an A record for the www.example.com, or the bare example.com domain. Instead, there are 4 x @ records with the Google Apps IP Address, 2 x TXT records with what I assume are Google Apps site verification strings/tokens, and a bunch of CNAME records for the various features of Google Apps (mail, calendar, docs, sites, etc). So, my questions: How do I point the www.example.com and example.com DNS entries at enom to my web site hosting provider, while leaving the domain managed by enom, and the Google Apps services working as they are now (with the obvious exception of Google Sites)? How do I setup the example.com mail-related DNS records (MX, etc) at the web site hosting provider, so that outbound email to [email protected] gets correctly sent to the google apps mail account, and doesn't get trapped inside the pseudo domain within the hosting providers servers?

Read the article

How can I create (or do I even need to create) an alias of a DNS MX record?

- by AKWF

I am in the process of moving my DNS records from Network Solutions to the Amazon Route 53 service. While I know and understand a little about the basic kinds of records, I am stumped on how to create the record that will point to the MX record on Network Solutions (if I'm even saying that right). On Network Solutions I have this: Mail Servers (MX Records) Note: Mail Servers are listed in rank order myapp.net Add Sub-Domain MXMailServer(Preference) TTL inbound.myapp.net.netsolmail.net.(10) 7200 Network Solutions E-mail I have read that the payload for an MX record state that it must point to an existing A record in the DNS. Yet in the example above, that inbound.myapp... record only has the words "Network Solutions E-mail" next to it. Our email is hosted at Network Solutions. I have already created the CNAME records that look like this: mail.myapp.net 7200 mail.mycarparts.net.netsolmail.net. smtp.myapp.net 7100 smtp.mycarparts.net.netsolmail.net. Since I am only using Amazon as the DNS, do I even need to do anything with that MX record? I appreciate your help, I googled and researched this before I posted, this is my first post on webmasters although I've been on SO for a few years.

Read the article

Designing a Database Application with OOP

- by Tim C

I often develop SQL database applications using Linq, and my methodology is to build model classes to represent each table, and each table that needs inserting or updating gets a Save() method (which either does an InsertOnSubmit() or SubmitChanges(), depending on the state of the object). Often, when I need to represent a collection of records, I'll create a class that inherits from a List-like object of the atomic class. ex. public class CustomerCollection : CoreCollection<Customer> { } Recently, I was working on an application where end-users were experiencing slowness, where each of the objects needed to be saved to the database if they met a certain criteria. My Save() method was slow, presumably because I was making all kinds of round-trips to the server, and calling DataContext.SubmitChanges() after each atomic save. So, the code might have looked something like this foreach(Customer c in customerCollection) { if(c.ShouldSave()) { c.Save(); } } I worked through multiple strategies to optimize, but ultimately settled on passing a big string of data to a SQL stored procedure, where the string has all the data that represents the records I was working with - it might look something like this: CustomerID:34567;CurrentAddress:23 3rd St;CustomerID:23456;CurrentAddress:123 4th St So, SQL server parses the string, performs the logic to determine appropriateness of save, and then Inserts, Updates, or Ignores. With C#/Linq doing this work, it saved 5-10 records / s. When SQL does it, I get 100 records / s, so there is no denying the Stored Proc is more efficient; however, I hate the solution because it doesn't seem nearly as clean or safe. My real concern is that I don't have any better solutions that hold a candle to the performance of the stored proc solution. Am I doing something obviously wrong in how I'm thinking about designing database applications? Are there better ways of designing database applications?

Read the article

Displaying a Grid of Data in ASP.NET MVC

One of the most common tasks we face as a web developers is displaying data in a grid. In its simplest incarnation, a grid merely displays information about a set of records - the orders placed by a particular customer, perhaps; however, most grids offer features like sorting, paging, and filtering to present the data in a more useful and readable manner. In ASP.NET WebForms the GridView control offers a quick and easy way to display a set of records in a grid, and offers features like sorting, paging, editing, and deleting with just a little extra work. On page load, the GridView automatically renders as an HTML <table> element, freeing you from having to write any markup and letting you focus instead on retrieving and binding the data to display to the GridView. In an ASP.NET MVC application, however, developers are on the hook for generating the markup rendered by each view. This task can be a bit daunting for developers new to ASP.NET MVC, especially those who have a background in WebForms. This is the first in a series of articles that explore how to display grids in an ASP.NET MVC application. This installment starts with a walk through of creating the ASP.NET MVC application and data access code used throughout this series. Next, it shows how to display a set of records in a simple grid. Future installments examine how to create richer grids that include sorting, paging, filtering, and client-side enhancements. We'll also look at pre-built grid solutions, like the Grid component in the MvcContrib project and JavaScript-based grids like jqGrid. But first things first - let's create an ASP.NET MVC application and see how to display database records in a web page. Read on to learn more! Read More >

Read the article

Displaying a Paged Grid of Data in ASP.NET MVC

This article demonstrates how to display a paged grid of data in an ASP.NET MVC application and builds upon the work done in two earlier articles: Displaying a Grid of Data in ASP.NET MVC and Sorting a Grid of Data in ASP.NET MVC. Displaying a Grid of Data in ASP.NET MVC started with creating a new ASP.NET MVC application in Visual Studio, then added the Northwind database to the project and showed how to use Microsoft's Linq-to-SQL tool to access data from the database. The article then looked at creating a Controller and View for displaying a list of product information (the Model). Sorting a Grid of Data in ASP.NET MVC enhanced the application by adding a view-specific Model (ProductGridModel) that provided the View with the sorted collection of products to display along with sort-related information, such as the name of the database column the products were sorted by and whether the products were sorted in ascending or descending order. The Sorting a Grid of Data in ASP.NET MVC article also walked through creating a partial view to render the grid's header row so that each column header was a link that, when clicked, sorted the grid by that column. In this article we enhance the view-specific Model (ProductGridModel) to include paging-related information to include the current page being viewed, how many records to show per page, and how many total records are being paged through. Next, we create an action in the Controller that efficiently retrieves the appropriate subset of records to display and then complete the exercise by building a View that displays the subset of records and includes a paging interface that allows the user to step to the next or previous page, or to jump to a particular page number, we create and use a partial view that displays a numeric paging interface Like with its predecessors, this article offers step-by-step instructions and includes a complete, working demo available for download at the end of the article. Read on to learn more! Read More >

Read the article

I never really understood: what is Application Binary Interface (ABI)?

- by claws

I never clearly understood what is an ABI. I'm sorry for such a lengthy question. I just want to clearly understand things. Please don't point me to wiki article, If could understand it, I wouldn't be here posting such a lengthy post. This is my mindset about different interfaces: TV remote is an interface between user and TV. It is an existing entity but useless (doesn't provide any functionality) by itself. All the functionality for each of those buttons on the remote is implemented in the Television set. Interface: It is a "existing entity" layer between the functionality and consumer of that functionality. An, interface by itself is doesn't do anything. It just invokes the functionality lying behind. Now depending on who the user is there are different type of interfaces. Command Line Interface(CLI) commands are the existing entities, consumer is the user and functionality lies behind. functionality: my software functionality which solves some purpose to which we are describing this interface. existing entities: commands consumer: user Graphical User Interface(GUI) window,buttons etc.. are the existing entities, again consumer is the user and functionality lies behind. functionality: my software functionality which solves some purpose to which we are describing this interface. existing entities: window,buttons etc.. consumer: user Application Programming Interface(API) functions or to be more correct, interfaces (in interfaced based programming) are the existing entities, consumer here is another program not a user. and again functionality lies behind this layer. functionality: my software functionality which solves some purpose to which we are describing this interface. existing entities: functions, Interfaces(array of functions). consumer: another program/application. Application Binary Interface (ABI) Here is my problem starts. functionality: ??? existing entities: ??? consumer: ??? I've wrote few softwares in different languages and provided different kind of interfaces (CLI, GUI, API) but I'm not sure, if I ever, provided any ABI. http://en.wikipedia.org/wiki/Application_binary_interface says: ABIs cover details such as data type, size, and alignment; the calling convention, which controls how functions' arguments are passed and return values retrieved; the system call numbers and how an application should make system calls to the operating system; Other ABIs standardize details such as the C++ name mangling,[2] . exception propagation,[3] and calling convention between compilers on the same platform, but do not require cross-platform compatibility. Who needs these details? Please don't say, OS. I know assembly programming. I know how linking & loading works. I know what exactly happens inside. Where did C++ name mangling come in between? I thought we are talking at the binary level. Where did languages come in between? anyway, I've downloaded the [PDF] System V Application Binary Interface Edition 4.1 (1997-03-18) to see what exactly it contains. Well, most of it didn't make any sense. Why does it contain 2 chapters (4th & 5th) which describe the ELF file format.Infact, these are the only 2 significant chapters that specification. Rest of all the chapters "Processor Specific". Anyway, I thought that it is completely different topic. Please don't say that ELF file format specs are the ABI. It doesn't qualify to be Interface according to the definition. I know, since we are talking at such low level it must be very specific. But I'm not sure how is it "Instruction Set Architecture(ISA)" specific? Where can I find MS Window's ABI? So, these are the major queries that are bugging me.

Read the article

Wildcard subdomain setup ... want to change host IP throws off client A records... what to do...

- by Joe

Here is the current set up (in a nutshell). The site is set up with a wildcard subdomain, so *.website.com is accessible. Clients can then domain map their own domains with an A record to the server IP address and it will translate the to appropriate *.website.com with re directions and env variables in htaccess. Everything is working perfect... but now comes the problem. The site has grown larger than a single DQC Xeon server can handle at peak times. Looking at cloud options seems tempting, but clients are pointing their domains to a single IP address with the A record (our server). Now, this was probably bad planing from the start, but the question is, if this was to be done today, how would we set it up so that clients use a CNAME perhaps to point their domains to our server rather than an A record. And, if that is not possible for the root domain, how can we then use multiple IP addresses on our side to translate the incoming http request? Complex enough? Hope I've explained it well!

Read the article

Oracle Enterprise Data Quality: Ever Integration-ready

- by Mala Narasimharajan

It is closing in on a year now since Oracle’s acquisition of Datanomic, and the addition of Oracle Enterprise Data Quality (EDQ) to the Oracle software family. The big move has caused some big shifts in emphasis and some very encouraging excitement from the field. To give an illustration, combined with a shameless promotion of how EDQ can help to give quick insights into your data, I did a quick Phrase Profile of the subject field of emails to the Global EDQ mailing list since it was set up last September. The results revealed a very clear theme: Integration, Integration, Integration! As well as the important Siebel and Oracle Data Integrator (ODI) integrations, we have been asked about integration with a huge variety of Oracle applications, including EBS, Peoplesoft, CRM on Demand, Fusion, DRM, Endeca, RightNow, and more - and we have not stood still! While it would not have been possible to develop specific pre-integrations with all of the above within a year, we have developed a package of feature-rich out-of-the-box web services and batch processes that can be plugged into any application or middleware technology with ease. And with Siebel, they work out of the box. Oracle Enterprise Data Quality version 9.0.4 includes the Customer Data Services (CDS) pack – a ready set of standard processes with standard interfaces, to provide integrated: Address verification and cleansing Individual matching Organization matching The services can are suitable for either Batch or Real-Time processing, and are enabled for international data, with simple configuration options driving the set of locale-specific dictionaries that are used. For example, large dictionaries are provided to support international name transcription and variant matching, including highly specialized handling for Arabic, Japanese, Chinese and Korean data. In total across all locales, CDS includes well over a million dictionary entries. Excerpt from EDQ’s CDS Individual Name Standardization Dictionary CDS has been developed to replace the OEM of Informatica Identity Resolution (IIR) for attached Data Quality on the Oracle price list, but does this in a way that creates a ‘best of both worlds’ situation for customers, who can harness not only the out-of-the-box functionality of pre-packaged matching and standardization services, but also the flexibility of OEDQ if they want to customize the interfaces or the process logic, without having to learn more than one product. From a competitive point of view, we believe this stands us in good stead against our key competitors, including Informatica, who have separate ‘Identity Resolution’ and general DQ products, and IBM, who provide limited out-of-the-box capabilities (with a steep learning curve) in both their QualityStage data quality and Initiate matching products. Here is a brief guide to the main services provided in the pack: Address Verification and Standardization EDQ’s CDS Address Cleaning Process The Address Verification and Standardization service uses EDQ Address Verification (an OEM of Loqate software) to verify and clean addresses in either real-time or batch. The Address Verification processor is wrapped in an EDQ process – this adds significant capabilities over calling the underlying Address Verification API directly, specifically: Country-specific thresholds to determine when to accept the verification result (and therefore to change the input address) based on the confidence level of the API Optimization of address verification by pre-standardizing data where required Formatting of output addresses into the input address fields normally used by applications Adding descriptions of the address verification and geocoding return codes The process can then be used to provide real-time and batch address cleansing in any application; such as a simple web page calling address cleaning and geocoding as part of a check on individual data. Duplicate Prevention Unlike Informatica Identity Resolution (IIR), EDQ uses stateless services for duplicate prevention to avoid issues caused by complex replication and synchronization of large volume customer data. When a record is added or updated in an application, the EDQ Cluster Key Generation service is called, and returns a number of key values. These are used to select other records (‘candidates’) that may match in the application data (which has been pre-seeded with keys using the same service). The ‘driving record’ (the new or updated record) is then presented along with all selected candidates to the EDQ Matching Service, which decides which of the candidates are a good match with the driving record, and scores them according to the strength of match. In this model, complex multi-locale EDQ techniques can be used to generate the keys and ensure that the right balance between performance and matching effectiveness is maintained, while ensuring that the application retains control of data integrity and transactional commits. The process is explained below: EDQ Duplicate Prevention Architecture Note that where the integration is with a hub, there may be an additional call to the Cluster Key Generation service if the master record has changed due to merges with other records (and therefore needs to have new key values generated before commit). Batch Matching In order to allow customers to use different match rules in batch to real-time, separate matching templates are provided for batch matching. For example, some customers want to minimize intervention in key user flows (such as adding new customers) in front end applications, but to conduct a more exhaustive match on a regular basis in the back office. The batch matching jobs are also used when migrating data between systems, and in this case normally a more precise (and automated) type of matching is required, in order to minimize the review work performed by Data Stewards. In batch matching, data is captured into EDQ using its standard interfaces, and records are standardized, clustered and matched in an EDQ job before matches are written out. As with all EDQ jobs, batch matching may be called from Oracle Data Integrator (ODI) if required. When working with Siebel CRM (or master data in Siebel UCM), Siebel’s Data Quality Manager is used to instigate batch jobs, and a shared staging database is used to write records for matching and to consume match results. The CDS batch matching processes automatically adjust to Siebel’s ‘Full Match’ (match all records against each other) and ‘Incremental Match’ (match a subset of records against all of their selected candidates) modes. The Future The Customer Data Services Pack is an important part of the Oracle strategy for EDQ, offering a clear path to making Data Quality Assurance an integral part of enterprise applications, and providing a strong value proposition for adopting EDQ. We are planning various additions and improvements, including: An out-of-the-box Data Quality Dashboard Even more comprehensive international data handling Address search (suggesting multiple results) Integrated address matching The EDQ Customer Data Services Pack is part of the Enterprise Data Quality Media Pack, available for download at http://www.oracle.com/technetwork/middleware/oedq/downloads/index.html.

Read the article

Which comes first DNS or name servers?

- by Thomas Clayson

Which comes first? DNS or nameservers? Its just I'm editing a domain and want to point it to different hosting servers. Now, normally I'd just set the nameservers to the new hosting nameservers, but this doesn't seem to be working (the control panels not brilliant - doesn't say "accepted" or "success" - and whois searches are turning up nothing - although I should leave it a while longer). Anyway - the point is, in the DNS records there are two A records (one for " " and one for "www") which have an ip address associated with them. So this is what I don't understand. If I change the nameservers, do I have to remove the DNS records? Will name servers "overwrite" a DNS record? Or vice versa? Thank you.

Read the article

Use Drive Mirroring for Instant Backup in Windows 7

- by Trevor Bekolay

Even with the best backup solution, a hard drive crash means you’ll lose a few hours of work. By enabling drive mirroring in Windows 7, you’ll always have an up-to-date copy of your data. Windows 7’s mirroring – which is only available in Professional, Enterprise, and Ultimate editions – is a software implementation of RAID 1, which means that two or more disks are holding the exact same data. The files are constantly kept in sync, so that if one of the disks fails, you won’t lose any data. Note that mirroring is not technically a backup solution, because if you accidentally delete a file, it’s gone from both hard disks (though you may be able to recover the file). As an additional caveat, having mirrored disks requires changing them to “dynamic disks,” which can only be read within modern versions of Windows (you may have problems working with a dynamic disk in other operating systems or in older versions of Windows). See this Wikipedia page for more information. You will need at least one empty disk to set up disk mirroring. We’ll show you how to mirror an existing disk (of equal or lesser size) without losing any data on the mirrored drive, and how to set up two empty disks as mirrored copies from the get-go. Mirroring an Existing Drive Click on the start button and type partitions in the search box. Click on the Create and format hard disk partitions entry that shows up. Alternatively, if you’ve disabled the search box, press Win+R to open the Run window and type in: diskmgmt.msc The Disk Management window will appear. We’ve got a small disk, labeled OldData, that we want to mirror in a second disk of the same size. Note: The disk that you will use to mirror the existing disk must be unallocated. If it is not, then right-click on it and select Delete Volume… to mark it as unallocated. This will destroy any data on that drive. Right-click on the existing disk that you want to mirror. Select Add Mirror…. Select the disk that you want to use to mirror the existing disk’s data and press Add Mirror. You will be warned that this process will change the existing disk from basic to dynamic. Note that this process will not delete any data on the disk! The new disk will be marked as a mirror, and it will starting copying data from the existing drive to the new one. Eventually the drives will be synced up (it can take a while), and any data added to the E: drive will exist on both physical hard drives. Setting Up Two New Drives as Mirrored If you have two new equal-sized drives, you can format them to be mirrored copies of each other from the get-go. Open the Disk Management window as described above. Make sure that the drives are unallocated. If they’re not, and you don’t need the data on either of them, right-click and select Delete volume…. Right-click on one of the unallocated drives and select New Mirrored Volume…. A wizard will pop up. Click Next. Click on the drives you want to hold the mirrored data and click Add. Note that you can add any number of drives. Click Next. Assign it a drive letter that makes sense, and then click Next. You’re limited to using the NTFS file system for mirrored drives, so enter a volume label, enable compression if you want, and then click Next. Click Finish to start formatting the drives. You will be warned that the new drives will be converted to dynamic disks. And that’s it! You now have two mirrored drives. Any files added to E: will reside on both physical disks, in case something happens to one of them. Conclusion While the switch from basic to dynamic disks can be a problem for people who dual-boot into another operating system, setting up drive mirroring is an easy way to make sure that your data can be recovered in case of a hard drive crash. Of course, even with drive mirroring, we advocate regular backups to external drives or online backup services. Similar Articles Productive Geek Tips Rebit Backup Software [Review]Disabling Instant Search in Outlook 2007Restore Files from Backups on Windows Home ServerSecond Copy 7 [Review]Backup Windows Home Server Folders to an External Hard Drive TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 Acronis Online Backup Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app AceStock, a Tiny Desktop Quote Monitor Gmail Button Addon (Firefox) Hyperwords addon (Firefox) Backup Outlook 2010

Read the article

ASP.NET 4.0 and the Entity Framework 4 - Part 2: Perform CRUD Operations Using the Entity Framework

In this article, Vince demonstrates the usage of the Entity Framework 4 to create, read, update, and delete records in the database which was created in Part 1 of this series. After a short introduction, he discusses the various step involved in the modification of the database, creation of a web form, the selection records to load a drop down list, and the adding, updating, deletion and retrieval of records from the database with the help of relevant source code and screen shots.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

I want to host clients' websites, but not their email. What's the easiest way to handle this?

- by Phil

My company lets non-technical users build their own niche industry websites on our server, which we host. they can currently point their nameservers at their registrar to us, which ends up with them no longer having access to their email if they've already set it up through said registrar. We don't want to interfere with their existing email, nor do we want to get into the business of setting up email for them through our service. Thus, having them point A records/cname to us would work, but is this too complex for a non-technie user? We thought of having them point nameservers to us but pointing the MX records back to them, but this is also beyond their scope. Is there an easy way to 'point records' at their initial state? Any other ideas/feedback?

Read the article

Oracle NoSQL Database Exceeds 1 Million Mixed YCSB Ops/Sec

- by Charles Lamb

We ran a set of YCSB performance tests on Oracle NoSQL Database using SSD cards and Intel Xeon E5-2690 CPUs with the goal of achieving 1M mixed ops/sec on a 95% read / 5% update workload. We used the standard YCSB parameters: 13 byte keys and 1KB data size (1,102 bytes after serialization). The maximum database size was 2 billion records, or approximately 2 TB of data. We sized the shards to ensure that this was not an "in-memory" test (i.e. the data portion of the B-Trees did not fit into memory). All updates were durable and used the "simple majority" replica ack policy, effectively 'committing to the network'. All read operations used the Consistency.NONE_REQUIRED parameter allowing reads to be performed on any replica. In the past we have achieved 100K ops/sec using SSD cards on a single shard cluster (replication factor 3) so for this test we used 10 shards on 15 Storage Nodes with each SN carrying 2 Rep Nodes and each RN assigned to its own SSD card. After correcting a scaling problem in YCSB, we blew past the 1M ops/sec mark with 8 shards and proceeded to hit 1.2M ops/sec with 10 shards. Hardware Configuration We used 15 servers, each configured with two 335 GB SSD cards. We did not have homogeneous CPUs across all 15 servers available to us so 12 of the 15 were Xeon E5-2690, 2.9 GHz, 2 sockets, 32 threads, 193 GB RAM, and the other 3 were Xeon E5-2680, 2.7 GHz, 2 sockets, 32 threads, 193 GB RAM. There might have been some upside in having all 15 machines configured with the faster CPU, but since CPU was not the limiting factor we don't believe the improvement would be significant. The client machines were Xeon X5670, 2.93 GHz, 2 sockets, 24 threads, 96 GB RAM. Although the clients had 96 GB of RAM, neither the NoSQL Database or YCSB clients require anywhere near that amount of memory and the test could have just easily been run with much less. Networking was all 10GigE. YCSB Scaling Problem We made three modifications to the YCSB benchmark. The first was to allow the test to accommodate more than 2 billion records (effectively int's vs long's). To keep the key size constant, we changed the code to use base 32 for the user ids. The second change involved to the way we run the YCSB client in order to make the test itself horizontally scalable.The basic problem has to do with the way the YCSB test creates its Zipfian distribution of keys which is intended to model "real" loads by generating clusters of key collisions. Unfortunately, the percentage of collisions on the most contentious keys remains the same even as the number of keys in the database increases. As we scale up the load, the number of collisions on those keys increases as well, eventually exceeding the capacity of the single server used for a given key.This is not a workload that is realistic or amenable to horizontal scaling. YCSB does provide alternate key distribution algorithms so this is not a shortcoming of YCSB in general. We decided that a better model would be for the key collisions to be limited to a given YCSB client process. That way, as additional YCSB client processes (i.e. additional load) are added, they each maintain the same number of collisions they encounter themselves, but do not increase the number of collisions on a single key in the entire store. We added client processes proportionally to the number of records in the database (and therefore the number of shards). This change to the use of YCSB better models a use case where new groups of users are likely to access either just their own entries, or entries within their own subgroups, rather than all users showing the same interest in a single global collection of keys. If an application finds every user having the same likelihood of wanting to modify a single global key, that application has no real hope of getting horizontal scaling. Finally, we used read/modify/write (also known as "Compare And Set") style updates during the mixed phase. This uses versioned operations to make sure that no updates are lost. This mode of operation provides better application behavior than the way we have typically run YCSB in the past, and is only practical at scale because we eliminated the shared key collision hotspots.It is also a more realistic testing scenario. To reiterate, all updates used a simple majority replica ack policy making them durable. Scalability Results In the table below, the "KVS Size" column is the number of records with the number of shards and the replication factor. Hence, the first row indicates 400m total records in the NoSQL Database (KV Store), 2 shards, and a replication factor of 3. The "Clients" column indicates the number of YCSB client processes. "Threads" is the number of threads per process with the total number of threads. Hence, 90 threads per YCSB process for a total of 360 threads. The client processes were distributed across 10 client machines. Shards KVS Size Clients Mixed (records) Threads OverallThroughput(ops/sec) Read Latencyav/95%/99%(ms) Write Latencyav/95%/99%(ms) 2 400m(2x3) 4 90(360) 302,152 0.76/1/3 3.08/8/35 4 800m(4x3) 8 90(720) 558,569 0.79/1/4 3.82/16/45 8 1600m(8x3) 16 90(1440) 1,028,868 0.85/2/5 4.29/21/51 10 2000m(10x3) 20 90(1800) 1,244,550 0.88/2/6 4.47/23/53

Read the article

JQuery: Get length of JSON reply?

- by Rosarch

In a JQuery getJSON call, how can I tell the length of the JSON that's returned? function refreshRoomList() { $.getJSON('API/list_rooms', function (rooms) { if (rooms.length > 0) { $("#existing-room-list").empty(); $("#join-existing-room").text("Join existing room:"); // this shouldn't be here $.each(rooms, function (index, roomName) { var newChild = sprintf('<li><a href="room?key=%s">%s</a></li>', index, roomName); $("#existing-room-list").append(newChild); }); } else { $("#join-existing-room").text("No rooms found."); } }); } For some reason this doesn't work, but if I replace rooms.length > 0 with true, the full list of rooms is printed out.

Read the article

How can a domain use its own nameservers?

- by Thomas Clayson

I have to change the MX DNS records for our company domain name and I've come across this odd situation: A whois search shows up that the nameservers for ourcompany.com are ns1.ourcompany.com and ns2.ourcompany.com. In the DNS settings at the registrar there are no A/Cname records at all. However the nameservers are defined in the DNS settings for the domain on our dedicated server. (Registrar and host are two different companies). Using the DNS lookup on http://www.mxtoolbox.com/ shows that ns2.ourcompany.com is reporting the correct IP for our dedicated server. Its all very odd... the DNS on the dedicated server doesn't seem to have much effect, but its odd that the dns at the registrar's end doesn't have any records. thanks for your help.

Read the article

Implementing Google Search Appliance results into website

- by Adam Jenkin

I’m interested to hear peoples preferred methods or approaches to implementing the search results from a Google Search Appliance into an existing website. More specifically how do people prefer to implement/embed the search results into their existing site and persist the surrounding website elements (menus, membership etc) around the search results. As far as I am aware there are 3 different approaches. Sub-domain, handle everything in the xslt – create a search.mysite.com which is completely handled by google xslt and embed surround site components in xslt. Embed search results into existing site using an iframe – Use the existing website and just use an iframe to import results into page. Embed results into existing site by using server side processing – This is how I have previously integrated search into a site using a combination of bespoke dev and the GSALib project. I would be interested to hear if anyone has other suggestions, and were people have benefited or regretted using the above approaches.

Search Results

Search found 14354 results on 575 pages for 'existing records'.

Page 77/575 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84 | Next Page >

- by Detritus Maximus

- by NickGPS

- by Janet

- by matija

- by jlmt

- by LaserBeak

- by jpramod4u

- by user1754840

- by Metalshark

- by Paul Zee

- by AKWF

- by Tim C

- by claws

- by Joe

- by Mala Narasimharajan

- by Thomas Clayson

- by Trevor Bekolay

- by Phil

- by Charles Lamb

- by Rosarch

- by Thomas Clayson

- by Adam Jenkin

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84 | Next Page >