Search Results

Search found 20418 results on 817 pages for 'social network'.

Page 77/817 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

• Cannot connect to my VPN Server from another network

  - by SantaC

  ok here is the deal. I have a Windows 2008 R2 server with RRAS installed configured for VPN. I also have DHCP running. On my DC I have AD running and they're connected with my domain. I am only using one NIC though. As a client I have Windows 7. So I tried connecting to my VPN server through my own network, which worked fine, so the setup is correct. However, when I tried connecting to my VPN server on another network, it does not work. I went to my brothers home and tried connecting to my server but it did not pass. So on my VPN server I have ip: 192.168.2.99 At my brothers house, i did the configuration on his windows 7 and it cannot connect to that ip. I am operating on the 192.168.2.1 network and he is operating on the 192.168.0.1 network. So how do I configure his client in order to get it to work? I tried changing his ip to the 192.168.2.x network, but i am not sure you can do that. I need some help here what to do.

  Read the article

• Network connection on Linux

  - by Kevin

  A general question about network connection on Linux : once a network connection goes into time_wait, is it still tied to the process ? Does it still use resources like say filehandle ? Reason I ask is because once it goes into time_wait, lsof does not report it anymore. I guess that means that the network connection is no longer tied to the process and hence does not count against filehandle limit. Would like to confirm though.

  Read the article

• Stream computer screen to TV via network instead of a USB wireless link

  - by user24559

  I want to stream my computer screen (not just video or a limited amount of content) to my TV via the network. I know there are wireless devices that use USB to tranfer the screen to the TV. However, these are limited to a short distance. What I want to do is stream the data via the network so I can be anywhere within the network and have the data shown on the tv. I am looking for video and sound to transfer. I want the entire computer screen to transfer just like when you connect the computer to the tv via VGA or HDMI and the sound out using the 3.5mm plug. I have been unable to find a unit that allows for the entire computer screen to transfer via the network. I just find the ability to stream video. I am using Windows 7 Ultimate with a quad processor and 16 GB of memory so I have the power to handle the transfer. My tv is hdtv.

  Read the article

• Ubuntu reset network configuration

  - by user1103294

  When I boot up my ubuntu server, it cannot connect to my wireless network anymore. It says "waiting for network configuration" for 60 seconds, boots up, but no wireless. I suspect it's because of the following reasons. I used to connect to a wireless connection named 2WIRE555, password: 123abc But then I upgraded my connection and my new wireless connection was named 2WIRE444, password:111111 Being lazy, I simply renamed 2WIRE555 to 2WIRE444 and changed the password accordingly. I was hoping this would work but ever since then my network configurations is messed up. So back to the issue, how do I reset my network configurations for my Ubuntu 11.10 server?

  Read the article

• Why would my network slow down?

  - by monkthemighty

  The network at my work has about 40 computers on it and a quite a few printers. When there are a lot of people working the network will be slow. I can test the ping between my computer and the router and it will keep rising, sometimes to the point that it times out. The router we are using is running Ubuntu on a atom processor and it has 4gb of ram. When the network slows the process Ksoftirq will be using most if not all of the processing power. I have found that Ksoftirq is a process that handles irq requests. Also when the network slows down I have captured packets from the router and using tshark and looked at it using wireshark on my laptop. With the capture show a lot of packets with TCP Dup ACK and TCP Retransmissions. The destinations of the TCP Dup and TCP retransmissions are to most of the computers on the network but there are some that are far more than others. What could this problem be caused by?

  Read the article

• How to block access to addresses outside network (internet)

  - by devnull

  I have a homeserver, that is now connected to the internet with an own network device (ath0 - 192.168.1.x). It also has one more network interface (eth0 - 192.168.0.x). Soon I will get a second internet line that will be connected the second network. The server then has both networks with different internet lines available, but i only want it to connect to the internet on the old ath0 interface - not the new eth0 (192.168.0.x). Background of that constellation is that the new line has a volume-limit in traffic - the old hasn't and i need the new line for all mobile devices and laptops. The devices should be able to use the new network to connect to the internet and the server. The homeserver is a debian 6 with iptables and some already written rules for it. I need now a rule to block all outgoing internet access on the eth0 interface - i guess it could be something with --target != 192.168.0.0 but i did not succeed in finding the proper solution. Edit: found the solution: iptables -A OUTPUT -o eth0 -d 192.168.0.0/24 -m state --state NEW,ESTABLISHED -j ACCEPT With that setting, all traffic that uses the eth0 interface is only allowed if the destination is inside the network 192.168.0.x - all other traffic is denied .

  Read the article

• Need solution for Network/Servers.

  - by rehanplus

  Dear All, Please help me. I just joined a new Hospital and want some help managing my network. There are some requirements: Current Network: There is a D.S.L connection and that is terminated on a LINUX proxy and then connected to D-Link layer 2 switches and then providing internet to more then 200 PC's (Would be increasing to 1500 in couple of months). D-Link switches are not configured yet. Also there is one Database server Report server and an application server. In near Future Application should be accessed by local users as well as remote users from internet via our web server. We do have a sharing server and all these servers databases and PC's are on single sub net. Required Network: All i do want is to secure my network from outside access and just allowing specific users via web application and they will be submitting there record for patient card and appointment facility by means of application and entering there record (on our database) but not violating our network resources. Secondly in house users also need to access the same application and also internet but they must have some unique identity and rights (i.e. Finance lab dept. peoples do have limited access to that application). Notes: Should i create V LAN or break sub nets. Having a firewall will solve my issues? is a router needed on these type of scenario's. Currently all the access are restricted from Linux Proxy. Thanks.

  Read the article

• Unidentified network in Win7

  - by gylns

  I connect the internet through Ad-hoc network, My machine uses win7 and another uses winows xp, There's no problem when I connect the XP machine, but if i disconnect and reconnect the net, then my local network is marked as "Unidentified network",unless restart the XP machine, I don't know why?

  Read the article

• Methods and practices for managing a network that has no internet connection

  - by FaultyJuggler

  Originally asked in Super User but realized this belongs here. Long story short, I am setting up a network with 32 servers of varying specs that will be used for testing and development. We will be using RedHat Linux, we also do not have a router as of yet and were looking into making one of the servers act as our router/DHCP etc. The small cluster will be on an isolated network with no internet. I can use external harddrives and discs to transfer anything from external sources into machines on the network, so this isn't a locked down secure network, it just won't have a direct connection to the outside world. I've worked on such setups before, but always long after they were setup. So I'm reaching out to see what everyone knows as far as how groups have handled initial setup and maintenance of such a situation. What is the best way to get them all configured and up to date? What are the best ways to automate updates, network wide installs, etc. With the only given that I have large multi-terabyte external hard drives that would be used to drop whatever files are needed onto a central server, how do i then distribute those files and install their contents? I've done perl scripting, some teammates have played with puppet, so we aren't completely in the dark, I just wanted to avoid reinventing the wheel since this is a common challenge.

  Read the article

• USB Drive that simultaneously connects to more than one computer

  - by user2499

  Background: I have a portable USB drive that I use to make sure I have access to common files whenever at home, work, travel etc for cases when I may not have Internet/Network access of any kind. There are some cases when I have to work simultaneously on a laptop and a desktop computer, and for those cases I usually have to unplug this USB hard drive and move it between the two. Question: dual-computer USB drive? Is there a USB-based solution that would enable me to use this portable drive between two computers simultaneously? If there is not a USB-based solution, does anyone have alternative suggestions, consistent with the underlying rationale? Rationale: Sometimes I have to work on a desktop computer with locked-down networking capabilities (such as at the local photocopy shop) and it can be difficult to get a network configuration that allows dual-computer access without breaking things, or accidentally making my USB drive visible to the entire network. Basically what I need is a very simply LAN that is guaranteed to work regardless of the rules or constraints set by the network administrator for wherever I happen to be at the time. See also: http://superuser.com/questions/99274/how-to-connect-two-computers-with-usb

  Read the article

• Lost network on ubuntu server

  - by user1838473

  I have a virtual machine on Vsphere 5.0 running Ubuntu 12.04 when i put dinamic IP (/etc/network/interfaces) iface eth0 inet dhcp Ubuntu have network and i can do ping to google for example (8.8.8.8) but when i put static IP and configure resolv.conf My interfaces file: auto eth0 iface eth0 inet static address 192.168.1.54 gateway 192.168.1.1 netmask 255.255.255.0 it lost the network and i cant do ping to anything...i dont understand where is the problem... Thanks a lot

  Read the article

• Colliding network addresses

  - by joepd

  A customer is using the same address space as the company network. I need to connect with Cisco VPN Client to the network of the customer, without affecting local connectivity. To keep all working, I connect from a VM to avoid network addressing collisions. This works, but I'm looking for a way to get rid of the VM. Is it possible to connect with Cisco VPN Client 4.8 from Windows 7, without changing the 'normal' routing? How to tell specific applications (most importantly: Putty, VNC, mstsc, psql) to resolve their routes to the VPN instead of the default network interface? Have been hearing about SOCKS-proxies, is that something that could be made to work? I fear that this is a a bit of a crude question, but I'd be happy to specify more details/context.

  Read the article

• Google App Engine - How to implement the activity stream in a social network

  - by spidee

  I want some ideas on the best practice to implement an activity stream for a social network im building in app engine (PYTHON) I first want to keep a log for all activities of each user - so that we have a history. i.e. someone became a friend, added a picture, changed their address etc. This way we have a users history available should we need it. Also mean we can remove friendship joins, change user data but have a historical log. I also want to stream a users activity to their friends. for this only the last X activities need to be kept - that is in the scenario that messages are sent to friends when an activity occurs. Its pretty straight forward designing a history log - ie: when, what, where. The complication comes as to how we notify friends of a user as to their activity. In our app friendships are not mutual - ie they are based on the twitter following model. Some accounts could have thousands of followers. What is the best approach to model this. using a many to many join table and doing a costly query - using a feed class that fired a copy of the activity to all the subscribers - maybe into mcache? As their maybe a need to fire thousands of messages i would imagine a cron job would need to be used. Any help ideas thoughts on this Thx

  Read the article

• Redirect network logs from syslog to another file

  - by w0rldart

  I keep logging way to much info (not needed, for now) in my syslog, and not daily or hourly... but instant. If I want to watch for something in my syslog I just can't because the network log keeps interfering. So, how can I redirect network logs to another file and/or stop logging it? Dec 10 17:01:33 user kernel: [ 8716.000587] MediaState is connected Dec 10 17:01:33 user kernel: [ 8716.000599] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:33 user kernel: [ 8716.000601] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:33 user kernel: [ 8716.000612] rt28xx_get_wireless_stats ---> Dec 10 17:01:33 user kernel: [ 8716.000615] <--- rt28xx_get_wireless_stats Dec 10 17:01:39 user kernel: [ 8722.000714] MediaState is connected Dec 10 17:01:39 user kernel: [ 8722.000729] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:39 user kernel: [ 8722.000732] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:39 user kernel: [ 8722.000747] rt28xx_get_wireless_stats ---> Dec 10 17:01:39 user kernel: [ 8722.000751] <--- rt28xx_get_wireless_stats Dec 10 17:01:44 user kernel: [ 8726.904025] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:01:45 user kernel: [ 8728.003138] MediaState is connected Dec 10 17:01:45 user kernel: [ 8728.003153] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:45 user kernel: [ 8728.003157] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:45 user kernel: [ 8728.003171] rt28xx_get_wireless_stats ---> Dec 10 17:01:45 user kernel: [ 8728.003175] <--- rt28xx_get_wireless_stats Dec 10 17:01:51 user kernel: [ 8734.004066] MediaState is connected Dec 10 17:01:51 user kernel: [ 8734.004079] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:51 user kernel: [ 8734.004082] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:51 user kernel: [ 8734.004096] rt28xx_get_wireless_stats ---> Dec 10 17:01:51 user kernel: [ 8734.004099] <--- rt28xx_get_wireless_stats Dec 10 17:01:57 user kernel: [ 8740.004108] MediaState is connected Dec 10 17:01:57 user kernel: [ 8740.004119] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:01:57 user kernel: [ 8740.004121] ==>rt_ioctl_giwfreq 11 Dec 10 17:01:57 user kernel: [ 8740.004132] rt28xx_get_wireless_stats ---> Dec 10 17:01:57 user kernel: [ 8740.004135] <--- rt28xx_get_wireless_stats Dec 10 17:01:57 user kernel: [ 8740.436021] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:03 user kernel: [ 8746.005280] MediaState is connected Dec 10 17:02:03 user kernel: [ 8746.005294] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:03 user kernel: [ 8746.005298] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:03 user kernel: [ 8746.005312] rt28xx_get_wireless_stats ---> Dec 10 17:02:03 user kernel: [ 8746.005315] <--- rt28xx_get_wireless_stats Dec 10 17:02:09 user kernel: [ 8752.004790] MediaState is connected Dec 10 17:02:09 user kernel: [ 8752.004804] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:09 user kernel: [ 8752.004808] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:09 user kernel: [ 8752.004821] rt28xx_get_wireless_stats ---> Dec 10 17:02:09 user kernel: [ 8752.004825] <--- rt28xx_get_wireless_stats Dec 10 17:02:15 user kernel: [ 8757.984031] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:15 user kernel: [ 8758.004078] MediaState is connected Dec 10 17:02:15 user kernel: [ 8758.004094] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:15 user kernel: [ 8758.004097] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:15 user kernel: [ 8758.004112] rt28xx_get_wireless_stats ---> Dec 10 17:02:15 user kernel: [ 8758.004116] <--- rt28xx_get_wireless_stats Dec 10 17:02:16 user kernel: [ 8759.492017] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:19 user kernel: [ 8762.002179] SCANNING, suspend MSDU transmission ... Dec 10 17:02:19 user kernel: [ 8762.004291] MlmeScanReqAction -- Send PSM Data frame for off channel RM, SCAN_IN_PROGRESS=1! Dec 10 17:02:19 user kernel: [ 8762.025055] SYNC - BBP R4 to 20MHz.l Dec 10 17:02:19 user kernel: [ 8762.027249] RT35xx: SwitchChannel#1(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF1, K=0x02, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.170206] RT35xx: SwitchChannel#2(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF1, K=0x07, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.318211] RT35xx: SwitchChannel#3(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF2, K=0x02, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.462269] RT35xx: SwitchChannel#4(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF2, K=0x07, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.606229] RT35xx: SwitchChannel#5(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF3, K=0x02, R=0x02 Dec 10 17:02:19 user kernel: [ 8762.750202] RT35xx: SwitchChannel#6(RF=8, Pwr0=30, Pwr1=25, 2T), N=0xF3, K=0x07, R=0x02 Dec 10 17:02:20 user kernel: [ 8762.894217] RT35xx: SwitchChannel#7(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF4, K=0x02, R=0x02 Dec 10 17:02:20 user kernel: [ 8763.038202] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:20 user kernel: [ 8763.040194] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:20 user kernel: [ 8763.040199] BAR(1) : Tid (0) - 03a3:037e Dec 10 17:02:20 user kernel: [ 8763.040387] SYNC - End of SCAN, restore to channel 11, Total BSS[03] Dec 10 17:02:20 user kernel: [ 8763.040400] ScanNextChannel -- Send PSM Data frame Dec 10 17:02:20 user kernel: [ 8763.040402] bFastRoamingScan ~~~~~~~~~~~~~ Get back to send data ~~~~~~~~~~~~~ Dec 10 17:02:20 user kernel: [ 8763.040405] SCAN done, resume MSDU transmission ... Dec 10 17:02:20 user kernel: [ 8763.047022] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:20 user kernel: [ 8763.047026] BAR(1) : Tid (0) - 03a3:03a5 Dec 10 17:02:21 user kernel: [ 8763.898130] bImprovedScan ............. Resume for bImprovedScan, SCAN_PENDING .............. Dec 10 17:02:21 user kernel: [ 8763.898143] SCANNING, suspend MSDU transmission ... Dec 10 17:02:21 user kernel: [ 8763.900245] MlmeScanReqAction -- Send PSM Data frame for off channel RM, SCAN_IN_PROGRESS=1! Dec 10 17:02:21 user kernel: [ 8763.921144] SYNC - BBP R4 to 20MHz.l Dec 10 17:02:21 user kernel: [ 8763.923339] RT35xx: SwitchChannel#8(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF4, K=0x07, R=0x02 Dec 10 17:02:21 user kernel: [ 8763.996019] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:21 user kernel: [ 8764.066221] RT35xx: SwitchChannel#9(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF5, K=0x02, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.210212] RT35xx: SwitchChannel#10(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF5, K=0x07, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.215536] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.215542] BAR(1) : Tid (0) - 0457:0452 Dec 10 17:02:21 user kernel: [ 8764.244000] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.244004] BAR(1) : Tid (0) - 0459:0456 Dec 10 17:02:21 user kernel: [ 8764.253019] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.253023] BAR(1) : Tid (0) - 045c:0458 Dec 10 17:02:21 user kernel: [ 8764.256677] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.256681] BAR(1) : Tid (0) - 045c:045b Dec 10 17:02:21 user kernel: [ 8764.259785] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.259788] BAR(1) : Tid (0) - 045d:045b Dec 10 17:02:21 user kernel: [ 8764.280467] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.280471] BAR(1) : Tid (0) - 045f:045c Dec 10 17:02:21 user kernel: [ 8764.282189] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:21 user kernel: [ 8764.282192] BAR(1) : Tid (0) - 045f:045e Dec 10 17:02:21 user kernel: [ 8764.354204] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.356408] ScanNextChannel():Send PWA NullData frame to notify the associated AP! Dec 10 17:02:21 user kernel: [ 8764.498202] RT35xx: SwitchChannel#12(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x07, R=0x02 Dec 10 17:02:21 user kernel: [ 8764.642210] RT35xx: SwitchChannel#13(RF=8, Pwr0=30, Pwr1=28, 2T), N=0xF7, K=0x02, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.790229] RT35xx: SwitchChannel#14(RF=8, Pwr0=30, Pwr1=28, 2T), N=0xF8, K=0x04, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.934238] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.935243] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:22 user kernel: [ 8764.935249] BAR(1) : Tid (0) - 048e:0485 Dec 10 17:02:22 user kernel: [ 8764.936423] SYNC - End of SCAN, restore to channel 11, Total BSS[05] Dec 10 17:02:22 user kernel: [ 8764.936436] ScanNextChannel -- Send PSM Data frame Dec 10 17:02:22 user kernel: [ 8764.936440] SCAN done, resume MSDU transmission ... Dec 10 17:02:22 user kernel: [ 8764.940529] RT35xx: SwitchChannel#11(RF=8, Pwr0=29, Pwr1=26, 2T), N=0xF6, K=0x02, R=0x02 Dec 10 17:02:22 user kernel: [ 8764.942178] CntlEnqueueForRecv(): BAR-Wcid(1), Tid (0) Dec 10 17:02:22 user kernel: [ 8764.942182] BAR(1) : Tid (0) - 0493:048e Dec 10 17:02:22 user kernel: [ 8764.942715] CNTL - All roaming failed, restore to channel 11, Total BSS[05] Dec 10 17:02:22 user kernel: [ 8764.948016] MMCHK - No BEACON. restore R66 to the low bound(56) Dec 10 17:02:22 user kernel: [ 8764.948307] ===>rt_ioctl_giwscan. 5(5) BSS returned, data->length = 1111 Dec 10 17:02:23 user kernel: [ 8766.048073] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:23 user kernel: [ 8766.552034] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:27 user kernel: [ 8770.001180] MediaState is connected Dec 10 17:02:27 user kernel: [ 8770.001197] ==>rt_ioctl_giwmode(mode=2) Dec 10 17:02:27 user kernel: [ 8770.001201] ==>rt_ioctl_giwfreq 11 Dec 10 17:02:27 user kernel: [ 8770.001219] rt28xx_get_wireless_stats ---> Dec 10 17:02:27 user kernel: [ 8770.001223] <--- rt28xx_get_wireless_stats Dec 10 17:02:28 user kernel: [ 8771.564020] QuickDRS: TxTotalCnt <= 15, train back to original rate Dec 10 17:02:29 user kernel: [ 8772.064031] QuickDRS: TxTotalCnt <= 15, train back to original rate

  Read the article

• Error 0x6ba (RPC server is unavailable) when running sfc /scannow on Windows XP in Safe Mode

  - by leeand00

  I think that my mup.sys file is corrupt. I received the following error when trying to access a network share that was located on my Windows 7 box, from my Windows XP box: No network provider accepted the given network path. After reading this I attempted to follow the directions by rebooting my computer into safe mode. After I run "sfc /scannow" I receive the following error message: The specific error code is 0x000006ba [The RPC server is unavailable]. When I go into Services, it says that the Remote Procedure Call (RPC) service is running but that the Remote Procedure Call (RPC) Locator is not running. When I try to start the Remote Procedure Call (RPC) Locator, it gives me an error saying: Error 1084: This service cannot be started in Safe Mode What can I do about this? If it can't find the Remote Procedure Call service in safe mode?

  Read the article

• Running sfc /scannow provides the error The specific error code is 0x000006ba [The RPC server is una

  - by leeand00

  I think that my mup.sys file is corrupted, I received the following error when trying to access a network share that was located on my Windows 7 box, from my Windows xp box: No network provider accepted the given network path. After reading this I attempted to follow the directions by entering my computer into safe mode. After I run "sfc /scannow" I receive the following error message: The specific error code is 0x000006ba [The RPC server is unavailable]. Additionally when I go into Services, it says that the Remote Procedure Call (RPC) service is running but that the Remote Procedure Call (RPC) Locator is not running. When I try to start the Remote Procedure Call (RPC) Locator, it gives me an error saying: Error 1084: This service cannot be started in Safe Mode So what can I do about this exactly? If it can't find the Remote Procedure Call service in safe mode?

  Read the article

• Google Apps Email for new Primary Youtube Email

  - by MLM

  I have a YouTube account that I want to change the primary email for but every time I try to add a alternate address it says it is already associated with another google account. The email is a google apps user because I want to manage my domains email through gmail. I have already tried deleting the account and re-creating it to make sure it is not associated with anything. The only way I can add it is if I delete the google apps account but then I can not verify since I need to access the verification email.

  Read the article

• Flash in browsers does not play sound accurately using Pulse network audio

  - by Dave M G

  I use PulseAudio to send sound over the LAN to an audio server. When playing any Flash media in Firefox or Chrome, the sound flutters, as if the volume were going up and down every second. The problem does not exhibit with any other software, and I think it's specific to how Flash interacts with my sound set up. How do I get Flash to play nice with the PulseAudio network sound server? Update I have discovered that I can stop the sound fluttering if I follow these steps: Start a Flash video Run pulseaudio --kill on the server Wait about 7 seconds After this, the PulseAudio server automatically respawns, and the sound in the Flash video is perfect. The problem now, though, is that I have to do this every time I start a Flash video. This is obviously not desireable. So, the question is, how do I make whatever it is that makes the sound work when I go through these steps stick so that I don't have to do them? Also, I've uploaded some PulseAudio log output to Pastebin, taken while attempting to play a Flash video, if that helps. I've tried to get logging details from Flash, but despite installing and enabling Flash for debugging, it has not generated any ouput at all. Details I have uploaded an example video of the problem onto Youtube. In the video you can see the opening of a Ted Talk video, and the sound flutters as it plays. The video also stutters while playing back. Here are my sound device output settings:

  Read the article

• Feedback on "market manipulation", a peripheral game mechanic for a satirical MMO

  - by BerndBrot

  This question asks for feedback on a specific game-mechanic. Since there is not one right feedback on a game mechanic, I tried to provide enough context and guidelines to still make it possible for users to rate answers and to accept an answer as the best answer (following these criteria from Writer.SE's meta website). Please comment if you have any suggestions on how I could improve the question in that regard. So, let's begin with the game itself and some of its elements which are relevant for this question. Context I'm working on a satirical, text-based multiplayer adventure and role-playing game set in modern-day London. The game resolves around the concept of sin and features a myriad of (venomous) allusions to all the things that go wrong in this world. Players can choose between character classes like bullshit artist (consultant), bankster, lawyer, mobster, celebrity, politician, etc. In order to complete the game, the player has to live so sinfully with regard to any of the seven deadly sins that a demon is willing to offer them a contract of sponsorship. On their quest to live a sinful live, characters explore more and more locations of modern-day London (on a GoogleMap), fight "monsters" like insurance sales agents or Jehovah's Witnesses, and complete quests, like building a PowerPoint presentation out of marketing buzz words or keeping up a number of substance abuse effects in order to progress on the gluttony path. Battles are turn based with both combatants having a deck of cards, with which they try to make their enemy give in to temptations of all sorts. Tempted enemies sometimes become contacts (an item drop mechanic), which can be exploited for various benefits, depending on their area of influence (finance, underworld, bureaucracy, etc.), level of influence, and kind of sway that the player has over them (bribed, seduced, threatened, etc.) Once a contract has been exploited, the player loses that contact. Most actions require turns. Turns are limited, but refill each day. Criteria A number of peripheral game mechanics are supposed to represent real world abuses and mischief in a humorous way integrate real world data and events to strengthen the feeling of relevance of the game's humor with regard to real world problems add fun ways of interacting with other players add ways for players to express themselves through game-play Market manipulation is one such peripheral game mechanic and should fulfill all of these goals. Market manipulation This is my initial design of the mechanic: Players can enter the London Stock Exchange (LSE) (without paying a turn) LSE displays the stock prices of a number of companies in industries like weapons or tobacco as well as some derivatives based on wheat and corn. The stock prices are calculated based on the actual stock prices of these companies and derivatives (in real time) any market manipulations that were conducted by the players any market corrections of the system Players can buy and sell shares with cash, a resource in the game, at current in-game market value (without paying a turn). Players can manipulate the market, i.e. let the price of a share either rise or fall, by some amount, over a certain period of time. Manipulating the market requires 1 turn A contact in the financial sector (see above). The higher the level of influence of the contact, the stronger the effect of the manipulation on the stock price, and/or the shorter it takes for the manipulation to manifest itself. Market manipulation also adds a crime to the player's record. (There are a multitude of ways to take care of that, but it is still another "cost" of market manipulations.) The system continuously corrects market manipulations by letting the in-game prices converge towards their real world counterparts at a rate of 2% of the difference between the two per hour. Because of this market correction mechanism, pushing up prices (and screwing down prices) becomes increasingly difficult the higher (lower) the price already is. Whenever food prices reach a certain level, in-game stories are posted about hunger catastrophes happening somewhere far, far away (maybe with links to real world news stories). Whenever a player sells a certain number of shares with a sufficiently high margin, they are mentioned in that day's in-game financial news. Since the number of stock options is very limited, players will inevitably collide in their efforts to manipulate the market in their favor. Hopefully, it will also be a fun side-arena for guilds and covenants to fight each other. Question(s) What do you think of this mechanism given the criteria for peripheral game mechanics that I specified for my game? Do you have any ideas how the mechanic could be improved with regard to these criteria (or otherwise)? Could it be improved to allow for more expressive game-play, or involve an allusion to some other real world madness (like short selling, leveraging, or some other banking magic)? Are there any game-theoretic problems with this mechanic, like maybe certain dominant individual strategies that, collectively, lead to every player profiting and thus eliminating the idea of market manipulation PVP? Also, if you like (or dislike) this question, feel free to participate in the discussion on GDSE meta: "Should we be more lax with regard to SE's question/answer format to make game design questions possible?"

  Read the article

• L2TP connection fails!

  - by a.toraby

  I've installed l2tp-ipsec-vpn but when I try to connect to the vpn server I get error 500. Here are the logs: Jun 17 12:54:37.449 ipsec_setup: Stopping Openswan IPsec... Jun 17 12:54:38.858 Stopping xl2tpd: xl2tpd. Jun 17 12:54:38.859 xl2tpd[1511]: death_handler: Fatal signal 15 received Jun 17 12:54:38.872 ipsec_setup: Starting Openswan IPsec U2.6.37/K3.2.0-23-generic... Jun 17 12:54:39.027 ipsec__plutorun: Starting Pluto subsystem... Jun 17 12:54:39.033 ipsec__plutorun: adjusting ipsec.d to /etc/ipsec.d Jun 17 12:54:39.037 recvref[30]: Protocol not available Jun 17 12:54:39.038 xl2tpd[2442]: This binary does not support kernel L2TP. Jun 17 12:54:39.038 xl2tpd[2444]: xl2tpd version xl2tpd-1.3.1 started on atp-ThinkPad-SL410 PID:2444 Jun 17 12:54:39.038 xl2tpd[2444]: Written by Mark Spencer, Copyright (C) 1998, Adtran, Inc. Jun 17 12:54:39.038 xl2tpd[2444]: Forked by Scott Balmos and David Stipp, (C) 2001 Jun 17 12:54:39.038 xl2tpd[2444]: Inherited by Jeff McAdams, (C) 2002 Jun 17 12:54:39.039 xl2tpd[2444]: Forked again by Xelerance (www.xelerance.com) (C) 2006 Jun 17 12:54:39.039 xl2tpd[2444]: Listening on IP address 0.0.0.0, port 1701 Jun 17 12:54:39.040 Starting xl2tpd: xl2tpd. Jun 17 12:54:39.062 ipsec__plutorun: 002 added connection description "L2TP" Jun 17 12:55:30.753 104 "L2TP" #1: STATE_MAIN_I1: initiate Jun 17 12:55:30.754 010 "L2TP" #1: STATE_MAIN_I1: retransmission; will wait 20s for response Jun 17 12:55:30.754 010 "L2TP" #1: STATE_MAIN_I1: retransmission; will wait 40s for response Jun 17 12:55:30.754 003 "L2TP" #1: ignoring Vendor ID payload [MS NT5 ISAKMPOAKLEY 00000008] Jun 17 12:55:30.754 003 "L2TP" #1: received Vendor ID payload [RFC 3947] method set to=109 Jun 17 12:55:30.754 003 "L2TP" #1: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] meth=106, but already using method 109 Jun 17 12:55:30.755 003 "L2TP" #1: ignoring Vendor ID payload [FRAGMENTATION] Jun 17 12:55:30.755 003 "L2TP" #1: ignoring Vendor ID payload [MS-Negotiation Discovery Capable] Jun 17 12:55:30.755 003 "L2TP" #1: ignoring Vendor ID payload [IKE CGA version 1] Jun 17 12:55:30.755 106 "L2TP" #1: STATE_MAIN_I2: sent MI2, expecting MR2 Jun 17 12:55:30.755 010 "L2TP" #1: STATE_MAIN_I2: retransmission; will wait 20s for response Jun 17 12:55:30.755 003 "L2TP" #1: NAT-Traversal: Result using RFC 3947 (NAT-Traversal): i am NATed Jun 17 12:55:30.755 108 "L2TP" #1: STATE_MAIN_I3: sent MI3, expecting MR3 Jun 17 12:55:30.756 004 "L2TP" #1: STATE_MAIN_I4: ISAKMP SA established {auth=OAKLEY_PRESHARED_KEY cipher=oakley_3des_cbc_192 prf=oakley_sha group=modp1024} Jun 17 12:55:30.756 117 "L2TP" #2: STATE_QUICK_I1: initiate Jun 17 12:55:30.756 010 "L2TP" #2: STATE_QUICK_I1: retransmission; will wait 20s for response Jun 17 12:55:30.756 003 "L2TP" #2: ignoring informational payload, type IPSEC_RESPONDER_LIFETIME msgid=6b03ff69 Jun 17 12:55:30.756 003 "L2TP" #2: NAT-Traversal: received 2 NAT-OA. ignored because peer is not NATed Jun 17 12:55:30.756 003 "L2TP" #2: our client subnet returned doesn't match my proposal - us:192.168.1.3/32 vs them:109.162.174.235/32 Jun 17 12:55:30.757 003 "L2TP" #2: Allowing questionable proposal anyway [ALLOW_MICROSOFT_BAD_PROPOSAL] Jun 17 12:55:30.757 004 "L2TP" #2: STATE_QUICK_I2: sent QI2, IPsec SA established transport mode {ESP=>0x23af21f8 <0xdb4a87b6 xfrm=AES_128-HMAC_SHA1 NATOA=none NATD=none DPD=none} Jun 17 12:55:31.759 xl2tpd[2444]: Connecting to host x.x.x.x, port 1701 Jun 17 12:55:32.021 xl2tpd[2444]: Connection established to x.x.x.x, 1701. Local: 4720, Remote: 200 (ref=0/0). Jun 17 12:55:32.023 xl2tpd[2444]: Calling on tunnel 4720 Jun 17 12:55:32.454 xl2tpd[2444]: Call established with x.x.x.x, Local: 9667, Remote: 3, Serial: 1 (ref=0/0) Jun 17 12:55:32.456 xl2tpd[2444]: start_pppd: I'm running: Jun 17 12:55:32.456 xl2tpd[2444]: "/usr/sbin/pppd" Jun 17 12:55:32.457 xl2tpd[2444]: "passive" Jun 17 12:55:32.458 xl2tpd[2444]: "nodetach" Jun 17 12:55:32.458 xl2tpd[2444]: ":" Jun 17 12:55:32.459 xl2tpd[2444]: "file" Jun 17 12:55:32.459 xl2tpd[2444]: "/etc/ppp/L2TP.options.xl2tpd" Jun 17 12:55:32.460 xl2tpd[2444]: "ipparam" Jun 17 12:55:32.461 xl2tpd[2444]: "x.x.x.x" Jun 17 12:55:32.462 xl2tpd[2444]: "/dev/pts/1" Jun 17 12:55:32.583 pppd[2711]: Plugin passprompt.so loaded. Jun 17 12:55:32.583 pppd[2711]: pppd 2.4.5 started by root, uid 0 Jun 17 12:55:32.619 pppd[2711]: Using interface ppp0 Jun 17 12:55:32.620 pppd[2711]: Connect: ppp0 <--> /dev/pts/1 Jun 17 12:55:33.693 pppd[2711]: /usr/bin/L2tpIPsecVpn exited with code 0 Jun 17 12:55:34.454 [ERROR 404] Authentication failed: closing connection to 'L2TP' Jun 17 12:55:34.456 pppd[2711]: MS-CHAP authentication failed: E=691 Authentication failure Jun 17 12:55:34.457 pppd[2711]: CHAP authentication failed Jun 17 12:55:34.461 Stopping xl2tpd: xl2tpd. Jun 17 12:55:34.462 xl2tpd[2444]: death_handler: Fatal signal 15 received Jun 17 12:55:34.463 pppd[2711]: Modem hangup Jun 17 12:55:34.463 pppd[2711]: Connection terminated. Jun 17 12:55:34.474 ipsec_setup: Stopping Openswan IPsec... Jun 17 12:55:34.482 pppd[2711]: Exit. Jun 17 12:55:35.587 ipsec_setup: ERROR: Module xfrm4_mode_transport is in use Jun 17 12:55:35.665 ipsec_setup: ERROR: Module esp4 is in use I had this problem by ubuntu 11.10 though I can easily connect to the server from windows. I use ubuntu 12.0 64bit

  Read the article

• Week 24: Karate Kid Chops, The A-Team Runs, and the OPN Team Delivers

  - by sandra.haan

  The 80's called and they want their movies back. With the summer line-up of movies reminding us to wax on and wax off one can start to wonder if there is anything new to look forward to this summer. The OPN Team is happy to report that - yes - there is. As Hannibal would say "I love it when a plan comes together"! And a plan we have; for the past 2 months we've been working to pull together the FY11 Oracle PartnerNetwork Kickoff. Listen in as Judson tells you more. While we can't offer you Bradley Cooper or Jackie Chan we can promise you an exciting line-up of guests including Safra Catz and Charles Phillips. With no lines to wait in or the annoyingly tall guy sitting in front of you this might just be the best thing you see all summer. Register now & Happy New Year, The OPN Communications Team

  Read the article

• Programming logic to group a users activities like facebook. E.g. Chris is now friends with A, B and C

  - by Chris Dowdeswell

  So I am trying to develop an activity feed for my site, Basically If I UNION a bunch of activities into a feed I would end up with something like the following. Chris is now friends with Mark Chris is now friends with Dave What I want though is a neater way of grouping these similar posts so the feed doesn't give information overload... E.g. Chris is now friends with Mark, Dave and 4 Others Any ideas on how I can approach this logically? I am using Classic ASP on SQL server. Here is the UNION statement I have so far... SELECT U.UserID As UserID, L.UN As UN,Left(U.UID,13) As ProfilePic,U.Fname + ' ' + U.Sname As FullName, 'said ' + WP.Post AS Activity, WP.Ctime FROM Users AS U LEFT JOIN Logins L ON L.userID = U.UserID LEFT OUTER JOIN WallPosts AS WP ON WP.userID = U.userID WHERE WP.Ctime IS NOT NULL UNION SELECT U.UserID As UserID, L.UN As UN,Left(U.UID,13) As ProfilePic,U.Fname + ' ' + U.Sname As FullName, 'commented ' + C.Comment AS Activity, C.Ctime FROM Users AS U LEFT JOIN Logins L ON L.userID = U.UserID LEFT OUTER JOIN Comments AS C ON C.UserID = U.userID WHERE C.Ctime IS NOT NULL UNION SELECT U.UserID As UserID, L.UN As UN,Left(U.UID,13) As ProfilePic, U.Fname + ' ' + U.Sname As FullName, 'connected with <a href="/profile.asp?un='+(SELECT Logins.un FROM Logins WHERE Logins.userID = Cn.ToUserID)+'">' + (SELECT Users.Fname + ' ' + Users.Sname FROM Users WHERE userID = Cn.ToUserID) + '</a>' AS Activity, Cn.Ctime FROM Users AS U LEFT JOIN Logins L ON L.userID = U.UserID LEFT OUTER JOIN Connections AS Cn ON Cn.UserID = U.userID WHERE CN.Ctime IS NOT NULL

  Read the article

• Content Catalog for Oracle OpenWorld is Ready

  - by Rick Ramsey

  American Major League Baseball Umpire Jim Joyce made one of the worst calls in baseball history when he ruled Jason Donald safe at First in Wednesday's game between the Detroit Lions and the Cleveland Indians. The New York Times tells the story well. It was the 9th inning. There were two outs. And Detroit Tiger's pitcher Armando Galarraga had pitched a perfect game. Instead of becoming the 21st pitcher in Major League Baseball history to pitch a perfect game, Galarraga became the 10th pitcher in Major League Baseball history to ever lose a perfect game with two outs in the ninth inning. More insight from the New York Times here. You can avoid a similar mistake and its attendant death treats, hate mail, and self-loathing by studying the Content Catalog just released for Oracle Open World, Java One, and Oracle Develop conferences being held in San Francisco September 19-23. The Content Catalog displays all the available content related to the event, the venue, and the stream or track you're interested in. Additional filters are available to narrow down your results even more. It's simple to use and a big help. Give it a try. It'll spare you the fate of Jim Joyce. - Rick

  Read the article

• book about psychology of decision and psychology of human

  - by boos

  I'm a unix developer and i want to make career in project/people management as first step. I think sometimes is better to have good communication skill and in general more human skill to make career more fast. Almost in Italy, a lot of people made career development more fast for his human skill and not for his technical skill. Anyone have read some book about psychology to better manage how people and personality work and to exploit decision making situation in the right way? I have found some interesting book about people personality and psychology of decision, but i am in doubt about the usefulness about reading such book. anyone have some experience in this path ? Anyone have found useful to read similar book about how people work, to manage career development in a more fast way and handle people and decision in a more useful way? i have already read peopleware. The table of content of one of this book have: 1 - Judicment and decision 2 - Euristics and sistematics error 3 - Estimating probability and frequency prediction 4 - Risk and decision 5 - rappresentation and decision 6 - Memory, attention and decision. Etc. what do you think about ?

  Read the article

• Solarwinds SDK/customisation

  - by Shane

  Hi, Sorry if this is the wrong place to post, but it is a hybrid serverfault/stackoverflow question. I've been directed to take a look at Solarwinds, which is an excellent network monitoring solution, for an internal project. Basically we want to write our own panel to display information custom to our network infrastructure. Has anyone done anything like this, or know if there is a plugin SDK giving developer access? [edit:] Also, if anyone knows of any other Solarwinds-type open source network solutions, please let me know. Cheers, Shane

  Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >