Search Results

Search found 20418 results on 817 pages for 'social network'.

Page 81/817 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

  • Why do I have to reconnect my usb router cable?

    - by Searock
    I have a Iball Baton ADSD2+ Router. It's working fine but the problem is when I boot into Ubuntu I have to unplug the usb cable and then plug it again, then it starts working. Why do I have to re connect my usb cable? Let me know if you need more details. Edit : I am using a direct connection. I mean to say I don't have to enter a username or password. I am connected to internet as soon as I start my router. The problem is if I start my router before my computer I have to re connect my usb cable. Thanks.

    Read the article

  • No mobile broadband wizard with a GOBI2000

    - by XenGi
    My details: Thinkpad T410 GOBI 2000 WWAN Ubuntu 12.10 with Gnome3 In Ubnutu 12.04, Debian Squeeze and Debian Wheezy my GOBI2000 works like a charm but in Ubuntu 12.10 the connection wizard doesn't show up. I configured the card the normal way: added thnkpad ppa install gobi-loader-tp copied firmware files to /lib/firmware/gobi/ (the same files work under debian) The card is correctly recognised and my SIM is detected too. the only problem is when I try to setup a new connection the wizard doesn't start. simply nothing happens. Any idea?

    Read the article

  • Wireless BMC4311 driver install

    - by user113910
    Exasperated with Ubuntu 12.04 and BCM4311 driver. HP2133 (was SUSE 10) Installed 12.04 in March. It ran well until November with no updates) then updates killed my wireless controller. Trolled forums & other for fix. Tried sudo -apt-get ing & gedit ing. Finally got it working (on full update with STA driver) Hwew!—thought that was it, only to fail again after 3-4 days. Tried all the fixes again but sudo -apt-get ing & gedit ing does not fix. I'm not without experience either: first 'boot-loader' I/P from 20 switch panel, seq to 4096 bit core-store: run to I/P larger processes from paper tape reader. Gone thru acoustic-coupled networks-to-billboards (before 'the net') pre-DOS, DOS, Windows 3.1 & all the others. This is a tough problem. Any advice?

    Read the article

  • Ubuntu 12.04 Network Connection Unavailable

    - by user211315
    I recently added a EDIMAX EW-7811Un to my computer to allow wireless networking. That was working. Now after a reboot I am unable to connect to either wireless or wired network. the result of ifconfig is ifconfig eth0 Link encap:Ethernet HWaddr bc:ae:c5:46:19:6d inet6 addr: fe80::beae:c5ff:fe46:196d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:231 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:62615 (62.6 KB) Interrupt:51 Base address:0x4000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:664 errors:0 dropped:0 overruns:0 frame:0 TX packets:664 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:52639 (52.6 KB) TX bytes:52639 (52.6 KB) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

    Read the article

  • Hyper-V for Developers Part 1 Internal Networks

    Over the last year, weve been working with Microsoft to build training and demo content for the next version of Office Communications Server code-named Microsoft Communications Server 14.  This involved building multi-server demo environments in Hyper-V, getting them running on demo servers which we took to TechEd, PDC, and other training events, and sometimes connecting the demo servers to the show networks at those events.  ITPro stuff that should scare the hell out of a developer! It can get ugly when I occasionally have to venture into ITPro land.  Lets leave it at that. Having gone through this process about 10 to 15 times in the last year, I finally have it down.  This blog series is my attempt to put all that knowledge in one place if anything, so I can find it somewhere when I need it again.  Ill start with the most simple scenario and then build on top of it in future blog posts. If youre an ITPro, please resist the urge to laugh at how trivial this is. Internal Hyper-V Networks Lets start simple.  An internal network is one that intended only for the virtual machines that are going to be on that network it enables them to communicate with each other. Create an Internal Network On your host machine, fire up the Hyper-V Manager and click the Virtual Network Manager in the Actions panel. Select Internal and leave all the other default values. Give the virtual network a name, and leave all the other default values. After the virtual network is created, open the Network and Sharing Center and click Change Adapter Settings to see the list of network connections. The only thing I recommend that you do is to give this connection a friendly label, e.g. Hyper-V Internal.  When you have multiple networks and virtual networks on the host machines, this helps group the networks so you can easily differentiate them from each other.  Otherwise, dont touch it, only bad things can happen. Connect the Virtual Machines to the Internal Network Im assuming that you have more than 1 virtual machine already configured in Hyper-V, for example a Domain Controller, and Exchange Server, and a SharePoint Server. What you need to do is basically plug in the network to the virtual machine.  In order to do this, the machine needs to have a virtual network adapter.  If the VM doesnt have a network adapter, open the VMs Settings and click Add Hardware in the left pane.  Choose the virtual network to which to bind the adapter to. If you already have a virtual network adapter on the VM, simply connect it to the virtual network. Assign IP Addresses to the Virtual Machines on the Internal Network Open the Network and Sharing Center on your VM, there should only be 1 network at this time.  Open the Properties of the connection, select Internet Protocol Version 4 (TCP/IPv4) and hit Properties. In this environment, Im assigning IP addresses as 192.168.0.xxx.  This particular VM has an IP address of 192.168.0.40 with a subnet mask of 255.255.255.0, and a DNS Server of 192.168.0.18.  DNS is running on the Domain Controller VM which has an IP address of 192.168.0.18. Repeat this process on every VM in your environment, obviously assigning a unique IP address to each.  In an environment with a domain controller, you should now be able to ping the machines from each other. What Next? After completing this process, heres what you still cannot do: Access the internet from any of the VMs Remote desktop to a VM from the host Remote desktop to a VM over the network In the next post, well take a look configuring an External network adapter on the virtual machines.  Well then build on top of that so that you can RDP into the VMs from the host machine and over the network.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Twitter's new approach of third party application? How would you see this move as developer.... especially you plan to build a twitter client.

    - by MobileDev123
    Just today morning I have read news that twitter has issued a warning to developers not to make any new third party client, the official announcement can be read here. As a programmer, how do you see this move of twitter? Does it seems that they want to standardize the behavior of third party client or they don't want any new client in favor of the default clients they have made? What if anybody wants to create a new client? Is there any guidelines that-if followed- ensure that we can create a new mobile client? Or we should stop thinking about it? What are the option for the developers who want to build some clients for twitter? I can realize that I have asked too many questions, but I still think that there can be one common answer.

    Read the article

  • Wired : "Japanese despise western games" - how much is it true?

    - by user712092
    Wired has article that western games are seen as "bad games". Why is that? If that is true, than what do they see as bad? This article, i think, is biased towards western games: “The other day,” says Q Entertainment’s Mielke, “I was having lunch with a friend and I said, ‘Have you ever played StarCraft?’ And he said, ‘What’s StarCraft?’ Sometimes it’s just really shocking that their gaming vocabulary isn’t as extensive as it could be. I think Japanese game developers need to start playing other people’s games to open their minds, just like a writer might want to read classic literature to be inspired.” Rather than trusting such articles, I rather ask here.

    Read the article

  • Map a drive to root of a server (\\sever) in Vista

    - by Andy T
    Hi, In Win XP, I can very easily map a network drive to the root of my NAS server. I browse to it in Explorer (\192.168.1.70), choose "Map Network Drive", choose the drive letter, done. In Vista, this does not seem possible. I have to go "Map Network Drive" from 'Computer', then enter the address, but it will only let me map to specific shares (sub-folders off of the server root) and NOT to the server root share. Since my NAS has built-in shares (music, photo, video, etc.) then I would have to have drive letters for all of these, which I absolutely don't want. Can anyone tell me - how come I can easily map to the server root from XP, but not in Vista? Is there something fundamentally different in the networking across the two OS's? Or do I just need to do things a different way? Hope someone can help. Thanks, AT

    Read the article

  • Disaster Recovery Example

    Previously, I use to work for a small internet company that sells dental plans online. Our primary focus concerning disaster prevention and recovery is on our corporate website and private intranet site. We had a multiphase disaster recovery plan that includes data redundancy, load balancing, and off-site monitoring. Data redundancy is a key aspect of our disaster recovery plan. The first phase of this is to replicate our data to multiple database servers and schedule daily backups of the databases that are stored off site. The next phase is the file replication of data amongst our web servers that are also backed up daily by our collocation. In addition to the files located on the server, files are also stored locally on development machines, and again backed up using version control software. Load balancing is another key aspect of our disaster recovery plan. Load balancing offers many benefits for our system, better performance, load distribution and increased availability. With our servers behind a load balancer our system has the ability to accept multiple requests simultaneously because the load is split between multiple servers. Plus if one server is slow or experiencing a failure the traffic is diverted amongst the other servers connected to the load balancer allowing the server to get back online. The final key to our disaster recovery plan is off-site monitoring that notifies all IT staff of any outages or errors on the main website encountered by the monitor. Messages are sent by email, voicemail, and SMS. According to Disasterrecovery.org, disaster recovery planning is the way companies successfully manage crises with minimal cost and effort and maximum speed compared to others that are forced to make decision out of desperation when disasters occur. In addition Sun Guard stated in 2009 that the first step in disaster recovery planning is to analyze company risks and factor in fixed costs for things like hardware, software, staffing and utilities, as well as indirect costs, such as floor space, power protection, physical and information security, and management. Also availability requirements need to be determined per application and system as well as the strategies for recovery.

    Read the article

  • Can't connect to Wireless Network - Ubuntu 12.04 LTS & Sabrent A111N USB Dongle

    - by Ohgodwhy
    I've been trying to connect to this network for quite some time. I can't directly connect to the router with a Wire, but can access the Router with other wireless devices without any issues. I had previously tried several other Wifi nic's but none of them would load properly. Today, i went and bought a new (supported) Sabrent A111N USB Dongle, which said explicitly that it works with Linux 2.4 +. I popped the Dongle in, and low-and-behold it immediately said that there were Available Wireless Connections. I selected my connection and tried to connect, but it just loops constantly while saying Wireless Disconnected then attempts to connect again over and over. ifconfig and iwconfig both show my device in a ready and working state. However, iwlist wlan0 scan says that there are no results found. I don't get it... At one point, I could see the CPU in the DHCP client list under the router, but it doesn't fully make the connection (something about a timeout?). Any help would be appreciated. Bus 001 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN

    Read the article

  • Network print to brother MFC-7420

    - by trampster
    I am trying to pint to a Brother MFC-7420 from my ubuntu 10.04 machine. The brother is attached to a windows XP machine and is shared. This is what I have tried: System-Administration-Printing, Add, Expand Network Printer, Windows Printer via SAMBA, Browse (I can find the printer no problems here), Foward, Choose Driver Dialog, Brother, My printer is not in this list So the next thing I tried was to download the printer driver from here http://welcome.solutions.brother.com/bsc/public_s/id/linux/en/download_prn.html The driver installed fine but my printer still does not appear in the list. I also tried installing the cups wrapper but that gave the following error. Restarting Common Unix Printing System: cupsd [ OK ] cp: cannot stat `/usr/share/cups/model/MFC7420.ppd': No such file or directory dpkg: error processing cupswrappermfc7420 (--install): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: cupswrappermfc7420 I tried connecting the printer directly but even though I have installed the driver, when I go to printers and click on the printer (it shows up fine as a USB printer) then it say searching for drivers and then gives me a list, this is the same list as before which doesn't have my printer. It really shouldn't be this hard. on window you don't have to installing anything it just works and the same is true for my brothers Mac. How do I print to my printer?

    Read the article

  • Why does Public Folder share prompt for password even after I set "Turn off password protected sharing"

    - by cmaduro
    I have a fileserver on a WORKGROUP which I have created a share on. I have turned on public folder sharing, file and printing sharing and set password protected sharing to off. When I try to share the folder by right clicking it and selecting proerties, then selecting sharing tab, then clicking the "share" button, then clicking share, it prompts me asking wether or not I want to turn on network discovery for public network, and after I say either yes or no, it says that my folder cant be shared. When I try to share via advanced sharing, then the folder is shared, and it's status is set to shared. However when I try to access this folder from a computer on the same network, it prompts me to enter a username and password. I am trying to setup a share for my VMware ThinApp packages that can be access no matter what domain the users are on.

    Read the article

  • windows hosted networok on windows 8

    - by tanmaysingh
    my sister is using Acer laptop, that has an intel WLAN card and supports windows hosted network(checked in command prompt).Am using the basic way using netsh wlan command also, then am using netsh start wlan command.The hosted network gets created and it could b seen in "Network and Sharing Center" as the . I also went to Device manager, selected WLan card, made sure"allow this device to wake computer from sleep" is selected. Now I went to the newly created , clicked properties, and under sharing enabled allow this to be shared(but I am not able to select The name of the wifi my sis wants to share (in this case her college wifi name, LEts say QP4,Ethernet and Local Area connection are the only two option that are coming). Also the SSID name is not being shown in her mobile nor when I click the tower icon at the tray area,Any suggestions on what might be going wrong?She is using windows 8. Should I look for updated drivers? Her laptop is only 6 months old, i don't think the drivers are outdated. Any advice shall be appreciated.

    Read the article

  • Turning my mobile boardband into Wifi with my laptop using Kubuntu 12.04 to use it in my desktop PC

    - by Suhail cholassery
    Its been 3 or 4 months since I started using 12.04. What I want to do is very clear: Turn my mobile broadband connection into Wifi connection with my laptop using Kubuntu 12.04 to use it in my desktop PC. I browsed through most of the questions related to this (ad- hoc connections, bridging mobile broadband with Wifi, etc). I also read the ICS article, but I found those too difficult to digest. I hope that there is some other way to do this. I request you to give me a practical and applicable answer . I am not trying duplicate any other existing question.

    Read the article

  • Globacom and mCentric Deploy BDA and NoSQL Database to analyze network traffic 40x faster

    - by Jean-Pierre Dijcks
    In a fast evolving market, speed is of the essence. mCentric and Globacom leveraged Big Data Appliance, Oracle NoSQL Database to save over 35,000 Call-Processing minutes daily and analyze network traffic 40x faster.  Here are some highlights from the profile: Why Oracle “Oracle Big Data Appliance works well for very large amounts of structured and unstructured data. It is the most agile events-storage system for our collect-it-now and analyze-it-later set of business requirements. Moreover, choosing a prebuilt solution drastically reduced implementation time. We got the big data benefits without needing to assemble and tune a custom-built system, and without the hidden costs required to maintain a large number of servers in our data center. A single support license covers both the hardware and the integrated software, and we have one central point of contact for support,” said Sanjib Roy, CTO, Globacom. Implementation Process It took only five days for Oracle partner mCentric to deploy Oracle Big Data Appliance, perform the software install and configuration, certification, and resiliency testing. The entire process—from site planning to phase-I, go-live—was executed in just over ten weeks, well ahead of the four months allocated to complete the project. Oracle partner mCentric leveraged Oracle Advanced Customer Support Services’ implementation methodology to ensure configurations are tailored for peak performance, all patches are applied, and software and communications are consistently tested using proven methodologies and best practices. Read the entire profile here.

    Read the article

  • How many achievements should I include, and of what challenge?

    - by stephelton
    I know this question is fairy broad and subjective, but I'm wondering if there's been any published research into what an optimal number of achievements is and what kind of challenge they should present. The game this question directly relates to is a shoot-em-up, but an ideal answer is fairly theoretical. If there are there are too few achievements, or they are not challenging, I would expect they would fail in their goal to keep people playing. If there are too many, or they are unreasonably difficult, I would expect people to quickly give up. I personally witnessed the latter happening in Starcraft 2; a section of the achievements would have you win hundreds of games against their AI opponents (boring!)

    Read the article

  • What is the lowest ICQ number that was ever used? [closed]

    - by zzatkin
    I'm not sure if this is the correct place to post this question, so feel free to move it. I was wondering, since this is a tech-orientated questionnaire website, that someone would know what the lowest ICQ number ever used was. From doing some research, I found a lot of mixed answers, and I also found out that there was a beta period where the first few thousand numbers were used, but then they all got deleted or stopped being used.

    Read the article

  • Button "Add" is disabled in VPN Connection's dialog

    - by Innuendo
    I've just installed elementaryos-jupiter. (It's based on Ubuntu 10.10) I've entered VPN Connections' menu (nm - VPN Connections - Configure VPN) And there should be button "Add" - it is, but it's disabled (I can't press on it) I'm connecting via ethernet (LAN in a students' hostel) and we get internet via VPN connection (It worked for me in Ubuntu for a few years) Any suggestions? I've asked on IRC of elementaryos (there were few people) but they said that VPN is out-of-box, and it should work - they never met this.

    Read the article

  • Facebook Like Button on Individual Pages

    - by clifgray
    There have been a few questions like this asked before but not in the same way. I want to put a Facebook Like or Share or Recommend button on all of my website pages. The site is somewhat like Yelp but for different topics. I am wondering which button to put there. Does it do any good to have individual pages "liked" and does it show anywhere besides on that page? I basically just want people to be able to click a button and have the page show up on their wall and their friend's feeds and I am not sure what the best plugin for that is.

    Read the article

  • Share buttons vs sharer urls

    - by TeeOh
    As some people might know, adding share buttons from Facebook and Twitter can cause a page to slow down. I've seen many sites pass on the common iframe implementations that these sites offer and simply create icons that link to a sharer url for better control of page performance. http://www.facebook.com/sharer/sharer.php?u=http%3A%2F%2Fwww.cnn.com%2F&t=CNN%26s+website%27 However, I've also read that Facebook is dropping support for these links. For example, this link now redirects to the Like Button. http://www.facebook.com/facebook-widgets/share.php Here is an article noting that Facebook is deprecating/has deprecated it's share functionality and is sticking with the Like button. http://www.barbariangroup.com/posts/7544-the_facebook_share_button_has_been_deprecated_called_it I'm assuming this is the same for the sharing url. If the sharer url is no longer a reliable option, what other methods are there besides using 3rd party widgets (like Addthis)?

    Read the article

  • Movement prediction for non-shooters

    - by ShadowChaser
    I'm working on an isometric (2D) game with moderate-scale multiplayer - 20-30 players. I've had some difficulty getting a good movement prediction implementation in place. Right now, clients are authoritative for their own position. The server performs validation and broad-scale cheat detection, and I fully realize that the system will never be fully robust against cheating. However, the performance and implementation tradeoffs work well for me right now. Given that I'm dealing with sprite graphics, the game has 8 defined directions rather than free movement. Whenever the player changes their direction or speed (walk, run, stop), a "true" 3D velocity is set on the entity and a packet it sent to the server with the new movement state. In addition, every 250ms additional packets are transmitted with the player's current position for state updates on the server as well as for client prediction. After the server validates the packet, it gets automatically distributed to all of the other "nearby" players. Client-side, all entities with non-zero velocity (ie/ moving entities) are tracked and updated by a rudimentary "physics" system - basically nothing more than changing the position by the velocity according to the elapsed time slice (40ms or so). What I'm struggling with is how to implement clean movement prediction. I have the nagging suspicion that I've made a design mistake somewhere. I've been over the Unreal, Half-life, and all other movement prediction/lag compensation articles I could find, but they all seam geared toward shooters: "Don't send each control change, send updates every 120ms, server is authoritative, client predicts, etc". Unfortunately, that style of design won't work well for me - there's no 3D environment so each individual state change is important. 1) Most of the samples I saw tightly couple movement prediction right into the entities themselves. For example, storing the previous state along with the current state. I'd like to avoid that and keep entities with their "current state" only. Is there a better way to handle this? 2) What should happen when the player stops? I can't interpolate to the correct position, since they might need to walk backwards or another strange direction if their position is too far ahead. 3) What should happen when entities collide? If the current player collides with something, the answer is simple - just stop the player from moving. But what happens if two entities take up the same space on the server? What if the local prediction causes a remote entity to collide with the player or another entity - do I stop them as well? If the prediction had the misfortune of sticking them in front of a wall that the player has gone around, the prediction will never be able to compensate and once the error gets to high the entity will snap to the new position.

    Read the article

  • Utility to listen on port (Windows 2003 Server)

    - by Gero
    Hi, I need to validate some network connectivity from machine X to a Windows 2003 Server machine. To be able to do so I'm looking for a simple utility that I can run on the Windows 2003 server that will listen on a specified port. It does not have to do anything else. When it listens on the specified port I can do a telnet to that port from machine X and check if all firewalls are open. The Windows 2003 Server machine is already a production machine so I cannot install all kinds of stuff. At this stage we want to ensure that all network connectivity is in place before we do the installation of the 'real' application that will listen that port (don't want to wast time debugging network connectivity issues when we do the actual deployment of the new application. The utility should be a simple command line utility that does not require any installation. What utilities do you recommend? Thanks, Gero

    Read the article

  • My notebook goes offline automatically after some time

    - by air
    I have about 3 computers and 1 windows 2003 server in office and 1 network printer (HP LJ 2840). My network printer is installed on the server. I an sharing this printer on all clients with windows XP. All other computers are fine only 1 HP laptop. When I start that HP laptop the printer works fine but after some time, printer goes offline and I can't print until I restart the laptop. When that laptop goes to offline mode, I can work on that laptop, I can use shared network drives, I can ping server but it shows offline mode icon in Task bar status area. If i use \\servername I can see the server's shared items and if i go to printers I can't see any printer... I try my best to solve this issue, but I can't. Thanks

    Read the article

  • Cannot establish ssh connection to computer on local network

    - by ovangle
    I've just (re)installed ubuntu 11.10 on my main pc, and the connection times out every time I try to ssh connect to my laptop (over the local network) to retrieve the files I backed up there. The connection times out every time I try to connect. I can establish a connection in the other direction without issue. Here's the verbose output I get when I try to connect: ovangle@ruby-EP43-DS3:~$ ssh -v [email protected] OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 10.1.1.4 [10.1.1.4] port 22. debug1: connect to address 10.1.1.4 port 22: Connection timed out ssh: connect to host 10.1.1.4 port 22: Connection timed out ssh is installed on both machines, and I've tried deleting '~/.ssh/known_hosts' on both machines, still nada. I've changed the sshd logging on the laptop to VERBOSE and restarted the daemon (because I wasn't getting any relevant syslog entries otherwise), and this is the log for the most recent connection attempt. EDIT: posted wrong logs last time. They just showed that there was a connection received, they weren't actually the sshd logs (which were in auth.log as I recently discovered). Unfortunately, that log is filling up with extremely weird error messages and it gives me no information about the connection. Nov 8 16:02:18 ovangle-A6Rp pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Nov 8 16:02:18 ovangle-A6Rp pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Nov 8 16:02:18 ovangle-A6Rp pkexec[6270]: ovangle: Executing command [USER=root] [TTY=unknown] [CWD=/home/ovangle] [COMMAND=/usr/sbin/gnome-power-backlight-helper --set-brightness 2] Nov 8 16:02:19 ovangle-A6Rp pkexec: pam_unix(polkit-1:session): session opened for user root by (uid=1000) Nov 8 16:02:19 ovangle-A6Rp pkexec: pam_ck_connector(polkit-1:session): cannot determine display-device Nov 8 16:02:19 ovangle-A6Rp pkexec[6273]: ovangle: Executing command [USER=root] [TTY=unknown] [CWD=/home/ovangle] [COMMAND=/usr/sbin/gnome-power-backlight-helper --set-brightness 7]

    Read the article

  • NetworkManager doesn't detect my broadband device

    - by Joril
    I have a Huawei K3765 (USB ID 12D1:1520) and I'm trying to use it with Ubuntu 10.04 Lucid. I have usb-modeswitch installed, so when I plug the device I can see that it gets switched from storage-mode to modem-mode. My problem is that when I try to create a broadband mobile connection for it, NetworkManager doesn't detect the modem... I tried this on two different laptops. /var/log/daemon.log doesn't show anything of interest, AFAIKT... What could I try?

    Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >