Search Results

Search found 9235 results on 370 pages for 'social networking'.

Page 77/370 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

  • Wall jacks to patch panel?

    - by rj454me
    OK, I'm by no means a seasoned networking pro and I had no say so in the design of our current server room which is in dire need of an extreme makeover. Basically, in our server room we have 12 wall plates with 4 RJ-45 ports on each - 48 total RJ-45 ports. From these 48 ports is a spaghetti bowl of network cables feeding our servers located in a rack - there is no patch panel currently, just straight from the wall jack to each server. What I was wondering is, is it feasible to mount a 48 port patch panel in our server rack and feed into this patch panel from the wall jacks (of course nicely routing this cable through some new cable trays)? We really don't have the funds to mount the patch panel and have it fed directly from the switches in the telcom closet which is several hundred feet away. Current: Switch (Telcom Closet) - Wall Jacks - Servers Proposed: Switch (Telcom Closet) - Wall Jacks - Patch Panel - Servers

    Read the article

  • Hostname problems in CentOS 5.5

    - by spoon16
    I just set up a CentOS 5.5 machine on my local network and attempted to modify the hostname by editing /etc/sysconfig/network file. When I'm logged in locally the change to the hostname is reflected and seems to be working fine. When I open a SSH session via PuTTY from Windows this is what I see at the prompt: [root@? ~]# cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=yes HOSTNAME=mini.local [root@? ~]# sysctl kernel.hostname kernel.hostname = ? [root@? ~]# hostname ? [root@? ~]# hostname -f hostname: Unknown server error A couple of other symptoms that may be helpful in troubleshooting this problem. I can ping the CentOS box from my Windows machine via IP but not hostname. Also, my Netgear router does not display the hostname when I view the "Connected Devices", I do see the mac address and the proper IP listed though. How can I make it so that the hostname is properly propagated throughout my network?

    Read the article

  • XP Mode as a server, Win 7 as a client

    - by Spyro
    I have two virtual machines (XP Mode). They are connected to each other by a network setting - Internal Network. It is the only working setting. This is the only way I got two virtual XP to ping each other. Now I want to connect each of them from the application that runs on Windows 7 which is hosting both virtual machines, but I can't do that. The firewall on both XP-Mode machines is disabled. Any other networking setting added as additional adapter on Xp-Mode machine does not allow me to connect from Windows 7. So my question is this - how to enable connection from Windows 7 application to XP mode application (client - server)? Point 2 (pass message) work perfectly because of the "internal network" setting. The problem is point 1 and 3.

    Read the article

  • Customer Engagement: Are Your Customers Engaged With Your Brands?

    - by Michael Snow
    Engaging Customers is Critical for Business Growth This week we'll be spending some time looking at Customer Engagement. We all have stories about how we try to engage our customers better than ever before.  We all know that successfully engaging customers is critical to an organization’s business success. We also know that engaging our customers is more challenging today than ever before. There is so much noise to compete with for getting anyone's attention. Over the last decade and a half we’ve watched as the online channel became a primary one for conducting our business and even managing our lives. And during this whole process or evolution, the customer journey has grown increasingly complex. Customers themselves have assumed increasing power and influence over the purchase process and for setting the tone and pace of the relationships they have with brands and you see the evidence of this in the really high expectations that customers have today. They expect brand experiences that are personalized and relevant -- In other words they want experiences that demonstrate that the brand understands their interests, preferences and past interactions with them. They also expect their experience with a brand and the community surrounding it to be social and interactive – it’s no longer acceptable to have a static, one-way dialogue with your customer base or to fail to connect your customers with fellow customers, or with your employees and partners. And on top of all this, customers expect us to deliver this rich and engaging, personalized and interactive experience, in a consistent way across a variety of channels including web, mobile and social channels or even offline venues such as in-store or via a call center. And as a result, we see that delivery on these expectations and successfully engaging your customers is a great challenge today. Customers expect a personal, engaging and consistent online customer experience. Today’s consumer expects to engage with your brand and the community surrounding it in an interactive and social way. Customers have come to expect a lot for the online customer experience.  ·        They expect it to be personal: o   Accessible:  - Regardless of my device  Via my existing online identities  o   Relevant:  Content that interests me  o   Customized:  To be able to tailor my online experience  ·        They expect it to be engaging: o   Social:  So I can share content with my social networks  o   Intuitive:  To easily find what I need   o   Interactive:  So I can interact with online communities And they expect it to be consistent across the online experience – so you better have your brand and information ducks in a row. These expectations are not only limited to your customers by any means. Your employees (and partners) are also expecting to be empowered with engagement tools across their internal and external communications and interactions with customers, partners and other employees. We had a great conversation with Ted Schadler from Forrester Research entitled: "Mobile is the New Face of Engagement" that is now available On-Demand. Take a look at all the webcasts available to watch from our Social Business Thought Leader Series. Social capabilities have become so pervasive and changed customers’ expectations for their online experiences. The days of one-direction communication with customers are at an end. Today’s customers expect to engage in a dialogue with your brand and the community surrounding it in an interactive and social way. You have at a very short window of opportunity to engage a customer before they go to another site in their pursuit of information, product, or services. In fact, customers who engage with brands via social media tend to spend more that customers who don’t, between 20% and 40% more.  And your customers are also increasingly influenced by their social networks too – 40% of consumers say they factor in Facebook recommendations when making purchasing decisions.  This means a few different things for today’s businesses. Incorporating forms of social interaction such as commenting or reviews as well as tightly integrating your online experience with your customers’ social networking experiences into the online customer experience are crucial for maintaining the eyeballs on your desired pages. --- Notes/Sources: 93% - Cone Finds that Americans Expect Companies to Have a Presence in Social Media - http://www.coneinc.com/content1182 40% of consumers factor in Facebook recommendations when making decisions about purchasing (Increasing Campaign Effectiveness with Social Media, Syncapse, March 2011) 20%-40% - Customers who engage with a company via social media spend this percentage more with that company than other customers (Source: Bain & Company Report – Putting Social Media to Work)

    Read the article

  • Automatically generated /etc/hosts is wrong

    - by Niels Basjes
    I've created a kickstart script to install CentOS 5.5 (32bit) in a fully automated way. The DNS/DHCP setup correctly gives the system the right hostname in both the forward and reverse lookups. dig node4.mydomain.com. +short 10.10.10.64 dig -x 10.10.10.64 +short node4.mydomain.com. In the state the installed system is right after the installation completed is as follows: cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=yes GATEWAY=10.10.10.1 HOSTNAME=node4.mydomain.com echo ${HOSTNAME} node4.mydomain.com cat /etc/hosts # Do not remove the following line, or various programs # that require network functionality will fail. 127.0.0.1 localhost.localdomain localhost ::1 localhost6.localdomain6 localhost6 10.10.10.64 node4 My problem is that this automatically generated hosts file is slightly different from the way I want it (or better: the way Hadoop wants it). The last line should look like this: 10.10.10.64 node4.mydomain.com node4 What do I modify where to fix this? Thanks.

    Read the article

  • ubuntu server 10 - slow and can't remove desktop environment

    - by Alex
    i'm running ubuntu server 10.10 with the desktop environment. simple page requests are taking over 5 seconds even when connecting to the server through our local network. i believe this is partially related to having the desktop environment installed, as the server worked faster (but not as fast as it should considering that it's on the local network), but tasksel fails every time (aptitude failed 100). my knowledge of networking and linux in general is limited. would really appreciate ideas on how i can troubleshoot this problem. oh also, in the system monitor, one of the processors is almost always around 100%. i doubt this is normal too....

    Read the article

  • How can I fix my Virtual PC 2007 network configuration

    - by DanJ
    Hi, I have installed Windows Virtual PC 2007 on my Windows 2003 R2 Server. I have installed a virtual Windows XP. I have configured the virtual PC to use Shared Networking (NAT) I have disabled the firewall on the virtual windows XP The problem: I am unable to PING from Windows 2003 (the host) to the Windows XP (virtual) I do have normal traffic from the virtual to the internet Could this problem be related to routing? How I can I fix this network configuration to allow for the following traffic: 1. From Virtual to Internet 2. From Host to Virtual 3. If possible, from Internet to Virtual on pre-defined ports (port forwarding?) Thanks

    Read the article

  • How to enable printer settings over Jetdirect on HP 4100N

    - by zsero
    I have a HP 4100N printer and I am using it over network. Previously I was able to access the printer settings over internet, but now the only thing visible is Device Info and Networking. I can connect to the web server and I can set all the network related settings, but that's not what I want. There should be a supplies, config, print info, etc. page, what are not visible now. Can you tell me what setting should I set to enable this printer config page on the webserver? The printer is a HP 4100N and the network card is J4169A (Jetdirect 610n).

    Read the article

  • Use dns suffixes only on certain wireless networks?

    - by eidylon
    Hello all, quick question. I'm a software guy and networking is all black magic to me! I have a laptop which I use at home and at the office. In order to be able to more easily reference our servers at work, I have our domain name in the DNS suffixes on my TCP/IP settings on my wireless connection. This all works beautifully and I can reference our servers simply by name only. Now the problem... When I go home, it still has those suffixes in there, and I cannot access other servers because it appends the DNS suffixes to the server names. Is there a way I can set up DNS suffixes so that they are only applied when connected to a certain wireless network (I'm thinking by SSID).

    Read the article

  • setting up delegate or smtp forwarding

    - by cotiso
    for work we have a remote dedicated server to run our webservice that also runs our email services, at home(comcast residential internet) i cannot send mail using the dedicated server's SMTP, comcast spits back a error saying i can only use their SMTP server for sending mail at work(comcast business internet) we can use our dedicated server for sending mail with no problem so i set up a box at work to forward smtp traffic, i'm new to all this networking stuff by the way i used delegate to forward smtp traffic, can someone point me in the right direction on how to use this program(delegate) to fix our issue the delegate command i used to test is : delegated -P25 SERVER="smtp://dedicated.server.com:25" PERMIT=":::" -v i also opened up port 25 on the router so it points to my boxes ip are there any other ways to fool comcast into thinking im using my works ip to send mail, my coworkers and i are unable to send mail from home for some time now thanks

    Read the article

  • cannot access my own computer through My Network Places

    - by vgv8
    My home Windows XP Pro SP3 machine is DHCP client receiving configurations from ISP. Trying to access in WindowsExplorer -My Network Places - Microsoft Windows Network shows Workgroup with a delay of 3 min and then popups messagebox: Microsoft Windows Network Workgroup is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The list of servers for this workgroup is not currently available OK I am logged-in as local machine Administrator. The internet is accessible (I am writing this post through it) The Firewall is disabled The "Computer Bowser" and all networking services, I could find, are running Control Panel -- Network Connections -- Properties (of connection) --- Internet Protocol (TCP/IP), btn Properties --- --- tab General, btn "Advanced..." -- tab WINS-- rbtn "Enable NetBIOS over TCP/IP" checked Why cannot I access my own PC (and shares on it) through My Network Places What is the possible problem? How to daignose the problem?

    Read the article

  • Network access to VM only from host ...

    - by Jamie
    I'm trying to do some testing of Ubuntu 10.04 Beta 2 Server in a VMWare environment. The host is XP, and the VM software is VMPlayer. Problem is, I want to be able to see the VM from the network, not just from the host. I can SSH into the VM from the host, but from any other machine on the network I can't even get the VM to respond to a ping. Going the other way (from the VM out) isn't a problem at all. The VM software did an 'easy installer' so I'm not really sure what was going on with the networking. Suggestions?

    Read the article

  • Connect to wired and wireless networks at same time, Ubuntu

    - by Gary Chambers
    Currently, I have a media PC running Ubuntu 10.04 that I am trying to connect via a wired network cable directly to a NAS box, and wirelessly to the router. This works no problem after I run sudo /etc/init.d/networking restart but I can't get both interfaces to come up on system startup. My /etc/network/interfaces file reads as follows: auto eth0 iface eth0 inet static address 10.0.1.2 netmask 255.255.254.0 broadcast 10.0.1.255 network 10.0.1.0 auto wlan2 iface wlan2 inet dhcp As I say, I know this works, because I can get it to work by restarting the network interfaces, but I can't bring them both up on system startup. Does anyone know why this might be?

    Read the article

  • Process of carrying out a BER Test

    - by data
    I am subscribed to an ISP supplying a 3meg ADSL line. Lately (for the last 4 weeks) speeds have dropped from the usual average downstream speed of ~250kbps to just 0.14Mbps (according to speedtest.net) and employees are complaining about lack of access to the server. I have been calling customer support and logging calls for the last 3 weeks, but they have been unable to determine the source of the problem other than carrying out a few bitstream tests and checking the DHCP renewal times. I am going to call back and suggest carrying out a BER test. What type of equipment is needed to carry out this test? I have access to a wide range of Cisco networking equipment. Other: We don't need a leased line as there are less than ten employees.

    Read the article

  • VPN: What should my Gateway remote ID be?

    - by Lynn Owens
    I have a Netgear ProSafe UTM. I set the Gateway local ID to it's WAN IP. But I'm not sure what to put for it's Remote ID. I want to be able to connect to it from a laptop across the internet. I can chose between: Remote IP FQDN Client FQDN Cert DN Frankly I've tried them messing around with them all but I'm just shooting in the dark, and the help desk docs are worthless. Also, Googling around seems to end up with lots of pages not really related to what I want. A lot of pages on configuring Cisco or Windows home networking or privacy advocates.

    Read the article

  • LinkSys WRT54GL + AM200 in half-bridge mode - Setup guide recommendations?

    - by Peter Mounce
    I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. My ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

    Read the article

  • How do I access an Ubuntu VirtualBox guest at a static IP from an OS X host?

    - by David Siegel
    How does one configure an Ubuntu guest to use a static IP that's visible to an OS X host, and ensure that the static IP is independent of the host's network configuration? I previously used bridged networking for my guest, but I'm constantly moving my host between networks so the guest IP is always different. First, I tried setting the guest network configuration to NAT and forwarding host port 1022 to guest port 22, so I could at least ssh to a fixed address (localhost:1022): $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/Protocol" "TCP" $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/GuestPort" 22 $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/HostPort" 1022 Then, $ ssh localhost -p 1022 ssh: connect to host localhost port 1022: Connection refused But this didn't work (guest has no network access with NAT and OS X refused the connection, as you can see). I'd love a general solution that would let me communicate with my guest at a fixed IP.

    Read the article

  • VPN within a VM to allow for internet access on the host

    - by David Durrant
    I have a network connection (created under Networks and Sharing) that I use to connect to a customer's site. But when I use this to connect to the site, I loose all access to the public internet, and can only access customer specific items. I want to circumvent this issue by creating a VM and then utilizing the VM to connect to the network location and interact within the customer's domain, while leaving my host machine open to the internet. I'm not extremely familiar with networking, but I have a few basic skills. Please let me know if this is possible and what the correct procedures are. I already have a VM created with VirtualBox, and both the host and guest are running Windows 7 x64. I have created duplicate VPNs already, but can only connect successfully on the host machine.

    Read the article

  • Connect to wired and wireless networks at same time, Ubuntu

    - by Gary Chambers
    Currently, I have a media PC running Ubuntu 10.04 that I am trying to connect via a wired network cable directly to a NAS box, and wirelessly to the router. This works no problem after I run sudo /etc/init.d/networking restart but I can't get both interfaces to come up on system startup. My /etc/network/interfaces file reads as follows: auto eth0 iface eth0 inet static address 10.0.1.2 netmask 255.255.254.0 broadcast 10.0.1.255 network 10.0.1.0 auto wlan2 iface wlan2 inet dhcp As I say, I know this works, because I can get it to work by restarting the network interfaces, but I can't bring them both up on system startup. Does anyone know why this might be?

    Read the article

  • Vmware Workstation Development Server on Laptop

    - by Koobz
    I'm running an Ubuntu guest OS on my Windows 7 laptop. Currently, I have it set up for bridged networking. The guest is os is configured for a static ip of 192.168.1.115, which depending on the network I'm connected to, may not be available. When I want to view my development work I hit that up in my web browser. I'm really looking for the following scenario: 1) My guest OS ip address stays constant. 2) I can access my guest os even if I don't have an internet connection, or a lan/router. 3) I can share files with my guest/host. How does one accomplish this using VMware Workstation?

    Read the article

  • Where is debian storing its network settings?

    - by user13743
    I have a debian machine that is supposed to have a static ip, but insists on getting its address from the DHCP server. Here's this settings file: $> cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 192.168.1.99 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 Yet $> sudo /etc/init.d/networking restart Reconfiguring network interfaces...done. $> sudo ifconfig eth0 Link encap:Ethernet HWaddr 00:e0:03:09:05:2e inet addr:192.168.1.205 Bcast:255.255.255.255 Mask:255.255.255.0 ... Where is it being told to use dhcp?

    Read the article

  • Security tips for adding wireless AP to domain network?

    - by Cy
    I am researching best-practices for adding wireless to our existing domain network. My DHCP server is running Windows Server 03 Standard (not sure if thats useful). I am familiar with simple home networking but I thought I'd get some expert advice for the more advanced stuff. Any tips and / or best-practices? Is this Cisco Wireless Access Point a good option? Are there any additional hardware recommendations? Thank you in advance for your help.

    Read the article

  • LinkSys WRT54GL + AM200 in half-bridge mode - UK setup guide recommendations?

    - by Peter Mounce
    I am basically looking for a good guide on how to set up my home network with this set of hardware. I need: Dynamic DNS Firewall + port-forwarding VPN Wake-on-LAN from outside firewall VOIP would be nice QoS would be nice (make torrents take lower priority to other services when those other services are happening) DHCP Wireless + WPA2 security Ability to play multiplayer computer games I am not a networking or computing neophyte, but the last time I messed with network gear was a few years ago, so am needing to dust off knowledge I kinda half have. I have read that I should be wanting to set up the AM200 in half-bridge mode, so that the WRT54GL gets the WAN IP - this sounds like a good idea, but I'd still like to be advised. I have read that the dd-wrt firmware will meet my needs (though I gather I'll need the vpn-specific build, which appears to preclude supporting VOIP), but I'm not wedded to using it. I live in the UK and my ISP supplies me with: a block of 8 static IPs, of which 5 are usable to me a PPPoA ADSL2+ connection

    Read the article

  • How do I set up different configurations on an Ubuntu laptop based on different physical locations?

    - by Andrew Larned
    I'm looking for a way to have a couple (or three) multiple configurations set up on my laptop, and easily switch between them. To be more specific, when my laptop is at work, it's plugged into a second monitor, and has a specific set of networks configurations. At home, the second monitor is gone, the network configurations are different. At a public wireless point there are other configurations to set, etc. I know I can go into my preferences and turn on/turn off the monitor, and mess with the networking preferences, and so on, but I'm looking for a way to change a bunch of preferences all at once, and if it's possible to do that automatically, maybe based on the wireless APs in the vicinity, that would be even better.

    Read the article

  • TCP Windows Size vs Socket Buffer Size on Windows

    - by Patrick L
    I am new to Windows networking. When people talk about TCP tuning on Windows platform, they always mention about TCP Window Size. I am wondering whether Windows uses the concept of "Socket Buffer Size"? On Windows XP, the TCP window size is fixed. We can set it using the TCPWindowSize registry value. How about Socket Buffer Size? How can we set Socket Buffer size on Windows? Can we set it to a value different from TCP window size?

    Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >