Search Results

Search found 8923 results on 357 pages for 'wireless keyboard'.

Page 77/357 | < Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >

  • Struggles to connect to network when using WPA with a BCM43225

    - by pst007x
    When booting my laptop, it will try to connect to my wireless network, however a window keeps popping up asking me for my security password, which has already been saved. I have to keep deleting my network settings, and reconnecting, otherwise it keeps failing to connect. My wireless is set up with a WPA, I do not want to lower my security because of this, but it is a pain and can take me 15mins plus to finally connect. The problem has only become apparent since a fresh install of 11.10. IPV6 disabled. System info: 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) Subsystem: Acer Incorporated [ALI] Device 036d Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at b3400000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 02:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01) Subsystem: Broadcom Corporation Device 04da Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at b2400000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: wl, brcmsmac ADDITIONAL: In terminal I get this: pst007x@pst007x-ubuntu64:~$ nm-applet start ** Message: applet now removed from the notification area ** (nm-applet:2816): DEBUG: old state indicates that this was not a disconnect 0 ** Message: using fallback from indicator to GtkStatusIcon ** Message: applet now embedded in the notification area ** Message: No keyring secrets found for Auto Access 01/802-11-wireless-security; asking user. ** (nm-applet:2816): DEBUG: foo_client_state_changed_cb Note this line: ** Message: No keyring secrets found for Auto Access 01/802-11-wireless-security; asking user. At this point is where I am asked for the password. Please report WPA issues with Ubuntu 11.10 here: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/892727

    Read the article

  • Frequent disconnects using wlan AR9285

    - by John Neil
    I'm getting a large number of disconnects from my wireless when I switched to oneiric server (I did not see these happen with oneiric desktop) from my AR9285 wireless LAN device. Here is the syslog snippet: Oct 17 09:43:17 weather kernel: [ 1537.329138] wlan0: deauthenticated from 00:12:17:7a:8e:42 (Reason: 7) Oct 17 09:43:17 weather kernel: [ 1537.340409] cfg80211: All devices are disconnected, going to restore regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340423] cfg80211: Restoring regulatory settings Oct 17 09:43:17 weather kernel: [ 1537.340435] cfg80211: Calling CRDA to update world regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348571] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain Oct 17 09:43:17 weather kernel: [ 1537.348581] cfg80211: World regulatory domain updated: Oct 17 09:43:17 weather kernel: [ 1537.348586] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) Oct 17 09:43:17 weather kernel: [ 1537.348594] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348600] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348607] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348613] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Oct 17 09:43:17 weather kernel: [ 1537.348620] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) Here is the relevant lspci output: # lspci | grep Atheros 02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) I have done quite a bit of searching and saw discussions for previous versions of ubuntu that recommended installing the linux-backports-modules package. However, this does not appear to be available for oneiric (just the headers are listed as a package). Any advice on how to achieve a stable wireless connection for this server? It's location mitigates against using a wired connection.

    Read the article

  • xmodmap modifications aren't enough - anything else I can do?

    - by Codemonkey
    I'm using an Apple keyboard which has some annoyances compared to other keyboards. Namely, the Alt_L and Super_L keys are swapped, and the bar and less keys are swapped ("|" and "<"). I've written an Xmodmap file to swap the keys back: keycode 49 = less greater less greater onehalf threequarters keycode 64 = Super_L NoSymbol Super_L keycode 94 = bar section bar section brokenbar paragraph keycode 108 = Super_R NoSymbol Super_R keycode 133 = Alt_L Meta_L Alt_L Meta_L keycode 134 = Alt_R Meta_R Alt_R Meta_R I did this by identifying the keys using xev and the default modmap xmodmap -pke and swapping the keycodes. xev now identifies all my keys as correct, which is awesome! I can also use the correct keys to type the bar and less than symbols. (I followed this answer on askubuntu: How do I remap certain keys?) But it seems the change isn't very deep. For instance, the Super key is now broken in the Compiz Settings Manager. No shortcuts involving the Super key works (but the Alt key does). Also the settings dialog for Gnome Do doesn't heed the changes in xmodmap, and I can't open the Gnome Do window anymore if I use any of the remapped keys. So to summarize, everything broke. I would like a deeper way of telling Ubuntu (or any other Linux distro for that matter) which keys are which on the keyboard. Is there a way to edit the Keyboard Layout directly? I'm using the Norwegian Bokmål keyboard layout. Does it reside in a file somewhere I could edit? Any comments, previous experiences or relevant stray thoughts would be greatly appreciated - Thanks

    Read the article

  • Is it worth replacing mouse by standalone trackpad for heavy code-editing? [on hold]

    - by heltonbiker
    I recently got more interested in improving my tools, workspace and worflow. The first sting came with a sore finger due to a crappy keyboard, and then after some research I fell in love with the "mechanical keyboard is what you need" doctrine, bought one (cherry MX Brown if you're curious), and am very happy with the results. Currently I am replacing my previous text editor (Geany) with Sublime Text 3, and am also very happy and feeling much more powerful and professional :) Well, but while I re-read all the ancient debates about VIM vs whatever-else, the following excerpt from a blog post got me thinking again about the mouse vs keyboard, and the "moving around from the very home row" (in VIM) versus gesturing away with the tiny and unstable mouse cursor: Reaching for a mouse may indeed slow you down, but developers are commonly on machines where the trackpad is a micro-hand movement away. Most novice programmers can click on a character on screen faster than an expert Vimmer can type 20jFp; or LkEEE or /word or any other nasty way Vimmers have to use. The point of a mouse is to make arbitrary on screen jumps efficient, and it’s very good at doing that. Don’t you ever think you can beat a mouse. Well, although there is some bitterness in this statement, it makes a lot of sense, and EVEN MORE if you consider your direct input to be a TRACKPAD conveniently placed in front of your spacebar (which oddly is where I like to put my mouse, rotated 90° ccw, due to a serious tendonitis in my right shoulder, already healed, but you knod...). So, the question is: Has anyone replaced mouse by a standalone trackpad, to work in code editing in a desktop machine (that is, with a sandalone keyboard)? Was it worth the change?

    Read the article

  • Wifi doesn't connect if I'm upstairs

    - by user11233
    Hello there, I'm finding that Wifi connects when I'm in the living room, where the internet router etc is. But if I try to connect upstairs it is a no go. Booting in Windows 7 (dual boot :D ) I find that Wifi connects. I find this very confusing and have it since the install. Please help! Kind regards. #sudo lshw -c network *-network description: Wireless interface product: PRO/Wireless 5100 AGN [Shiloh] Network Connection vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 00:21:5d:1a:63:58 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=2.6.35-26-generic firmware=8.24.2.12 ip=10.0.0.4 latency=0 link=yes multicast=yes wireless=IEEE 802.11abg resources: irq:49 memory:de200000-de201fff Hope it helps! Hello guys, just tried to connect internet upstairs and to my surprise it does connect. Don't know exactly why. Only thing I've done recently is input the codes said bij Oli. Two things I've done on my own 1: installed Jupiter and 2: installed laptop-mode-tools. I really don't know if this can effect my internet but it's the only thing I can think of. Thanks for all the help, really appreciate it :) PS If someone thinks it might be helpful for others I would like to help find a 'real' solution to this problem. Just post down what I need to post here and I will try my best to help.

    Read the article

  • Wifi interface changes name seemingly at random

    - by ray_voelker
    I'm currently having some issues getting a wireless interface to work continuously under an install of Ubuntu 12.04.1 LTS. Some of the issues I'm experiencing include Connection will drop out after some time after it has initially worked. Interface will be a different name after a reboot. For example, wlan0 will become wlan4 when using the ifconfig -a command. Ubuntu will take a long time to boot, looking for network adapters. The purpose of this build is to function as a web kiosk in a library. The computer is supposed to boot up into a web browser, and allow for browsing of the catalog. For some reason this interface does not appear to be working as it should. Are there any explanations for some of these problems I'm having, and perhaps some solutions? The wireless card appears as this after doing an lspci ... Ralink corp. RT2561/RT61 802.11g PCI In the /etc/network/interfaces file I have the following configuration for the interface. auto wlan0 iface wlan0 inet dhcp wireless-essid UDwireless wireless-mode Managed Thanks in advance for help on this.

    Read the article

  • Dual boot 12.04 and W7 - keybaord and screen not responsive

    - by Saariko
    I installed 12.04 using WUBI on a working W7 64bit system. both KB and mouse work perfect during the BIOS boot, and on the bootmgr, I can select Windows 7 or Ubuntu to load. Once I select Ubuntu, the KB and mouse seem to loose their power (light on the mouse and Numlock leds go off) After couple of seconds, the screen gets blurry. The screen pops back at the Ubuntu login screen, the mouse gets activated (light works, as well as mouse pointer is moving) However, the keyboard is not responsive to any click, nor does any icon on the login screen. - Using the mouse, I can't select the virtual keyboard, nor the shutdown icon - like it's not accepting any mouse clicks. The following Q&A didn't answer: Keyboard not responding at login with 12.04 dual boot on toshiba satellite L775 which links to a post on the web I also tried 12.04 - Windows 7 Dual boot - not responding to keyboard in boot menu - that goes beyond the login screen, but still didnt' assist me. It's a wired USB KB The board is an Intel board, and there isn't even a PS/2 connection anymore. Tried moving around the USB's Tried removing the Mouse, and only have the KB. Neither helped.

    Read the article

  • WiFi problems on several Ubuntu installations

    - by Rickyfresh
    Okay this is the first time I have ever had to ask a question as usually the Ubuntu community have answered everything already but on this occasion there are many people asking for the answer but not one good solution has become available so far so someone please help or I will have to install Windows on my sons and my girlfriends PCs and that would be a disaster as I am trying to help convince people to move from Windows. I installed 12.04 on three computers on the same day. Dell Inspiron (Works Perfect) Toshiba Satellite Home built Desktop The Dell works perfect but the other two either keep losing connection to the wireless Internet and even when they are connected they stop connecting to web sites, for some reason it searches Google fine but will not connect to web sites when a link is clicked. So far people have recommended in other forums: Removing network manager and installing wicd (didn't solve it) Changing the MTU in the wireless settings (didn't solve it) All sorts of messing about with Firefox settings (this doesn't solve it and even if it did this would leave most average PC users scratching their heads and wishing they had stuck to windows) The problem exists on two very different machines and different wireless cards so I doubt its a driver or hardware issue, also many other Ubuntu users are having the same problem with a vast array of different machines and wireless cards. Can someone please give a good solution to this as its going to turn a lot of people away from Ubuntu if they cannot get this sorted. I would give some PC specs but the two machines are vastly different and the other people complaining of this problem also have very different systems all showing the same problem.

    Read the article

  • Configuring network to set wlan0 as primary

    - by Sheed
    I recently had to rebuild my pc and decided to go for ubuntu 14.04. I think the mistake I made was I started from a 12.04 install disk instead of the 12.10 disk I'd used previously and when given the option set my primary connection as ethernet (because the wireless option didn't work). After upgrading to 14.04 etc, I managed to get the wireless working, or more using steps like ifconfig -a and the likes I managed to prove that the wireless card etc. is all installed and working. However every time I boot without a hard wired connection plugged in I get the message "waiting for network configuration". I can then once it's booted without a network get my wirless working using sudo ifconfig wlan0 up iwlist wlan0 scan This seems to kick the wireless module into life and it appears in the GUI and I can then select a network, however all the options like edit network and disconnect etc are all greyed out. What I would like of course is if the WLAN0 was just set as my primary default network so I've been looking for a solution to this and it would seem that I need to adjust the old /etc/network/interfaces file but when I try to do so using the sudo vi /etc/network/interfaces command I, well I simply have no idea what I'm doing. Other than that typing :q! gets me out of there before I do to much damage! As far as I can tell (by navigating to the file in the GUI) the output of my /etc/network/interfaces is as follows: (obviously not including the " in each line that's just to break the heading rule of the #) "# This file describes the network interfaces available on your system "# and how to activate them. For more information, see interfaces(5). "# The loopback network interface auto lo iface lo inet loopback "# The primary network interface auto eth0 iface eth0 inet dhcp If this is the case then this clearly doesn't contain what it should do but I don't how to fix it. Nor do I even know if I'm on the right track. Any help would be appreciated thanks :)

    Read the article

  • How can I install Ubuntu's 10.10 kernel I Ubuntu 12.10?

    - by user103533
    I did use Ubuntu 10.10 for a long time, and now I replaced it with Ubuntu 12.10, every thing works great, but I do have one little problem, which is with my wireless card. On Ubuntu 10.10, it worked PERFECTLY, and it even worked better than in windows 7, so I was very happy with Ubuntu 10.10, but, like I said, after installing 12.10, my wireless card doesn't work any more, so I heard that KERNELS are the reason for that. Are kernels the reason for my wireless not working now? If yes then please teach me how to remove my current kernels and install 10.10 kernels. I went to -Additional Drivers- and i found something very weird i took picture and this is what it look like "apply changes" Button NOT active so i can't install driver :( anyway... my Wireless card is WL-138g v2 (remember on Ubuntu 10.10 it was WORKING 100% normally and FREE i did NOT pay for it driver) so... now what shall i do ? it is saying in picture // Using Non-Free firmware for linux kernel drivers from linux-firmware-nonfree (proprietary) // BTW i did "rfkill list" but NO-thing appear under that command.

    Read the article

  • Can't get IPv6 address using radvd on wireless interface on windows, wired works fine.

    - by AndrejaKo
    I set up my router to use OpenWRT and set it up to use IPv6 using a tunnel form SixXs. I'm having problems with stateless autoconfiguration using radvd. On my computer, wired connection can get its IPv6 address fine, but wireless can't. After spending some time on OpenWRT forums, I'm pretty much sure now that router is set up fine and that the problem is with my windows settings. Also, I do not have any problems getting IPv6 address on openSUSE 11.3. So what should I do to solve this and what information should I post? Here's radvdump output for wired interface: interface br-lan { AdvSendAdvert on; # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump AdvManagedFlag on; AdvOtherConfigFlag on; AdvReachableTime 0; AdvRetransTimer 0; AdvCurHopLimit 64; AdvDefaultLifetime 1800; AdvHomeAgentFlag off; AdvDefaultPreference medium; AdvSourceLLAddress on; prefix 2001:15c0:67d0::/64 { AdvValidLifetime 86400; AdvPreferredLifetime 14400; AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; # End of prefix definition }; # End of interface definition Here's radvdump output for wireless interface: # # radvd configuration generated by radvdump 1.6 # based on Router Advertisement from fe80::a0b7:deff:fef0:5b34 # received by interface br-lan # interface br-lan { AdvSendAdvert on; # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump AdvManagedFlag on; AdvOtherConfigFlag on; AdvReachableTime 0; AdvRetransTimer 0; AdvCurHopLimit 64; AdvDefaultLifetime 1800; AdvHomeAgentFlag off; AdvDefaultPreference medium; AdvSourceLLAddress on; prefix 2001:15c0:67d0::/64 { AdvValidLifetime 86400; AdvPreferredLifetime 14400; AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; # End of prefix definition }; # End of interface definition # # radvd configuration generated by radvdump 1.6 # based on Router Advertisement from fe80::a0b7:deff:fef0:5b34 # received by interface br-lan # interface br-lan { AdvSendAdvert on; # Note: {Min,Max}RtrAdvInterval cannot be obtained with radvdump AdvManagedFlag on; AdvOtherConfigFlag on; AdvReachableTime 0; AdvRetransTimer 0; AdvCurHopLimit 64; AdvDefaultLifetime 1800; AdvHomeAgentFlag off; AdvDefaultPreference medium; AdvSourceLLAddress on; prefix 2001:15c0:67d0::/64 { AdvValidLifetime 86400; AdvPreferredLifetime 14400; AdvOnLink on; AdvAutonomous on; AdvRouterAddr off; }; # End of prefix definition }; # End of interface definition

    Read the article

  • How do I connect my Windows XP laptop to the internet?

    - by rubysiddhi
    Hello fellow super users, The Past I have a Acer Travelmate 2300 laptop running Windows XP. 6 months ago I moved into a new apartment and got a new internet connection set up. After getting an internet connection installed in my apartment I reinstalled Windows XP and at the same time wiped my drive clean losing all the original Acer software and drivers. Once XP was reinstalled I had to find all the drivers again to get the Travelmate laptop connected to the internet. So, using my Vista laptop which was connected fine, I went to the Acer Travelmate Series drivers download page to download the necessary drivers. I transferred them to my Acer XP machine and installed them the best I could (there were no easy instructions so I just had to find all the executables and run them). I eventually got connected to the internet but not exactly in the way I had hoped for. The Present To be connected to the internet I need to have an Ethernet cord connecting my computer (via the Ethernet port) to my router. This is a problem since it defeats the purpose of having a Wireless LAN card in my Acer laptop. One of the programs I downloaded from the Acer Travelmate Series page was the Acer Wireless LAN Configuration Utility. This program allows me to see the current network I am connected to and all the available networks I could potentially connect to. It reminds me of XP's Wireless Network Connection window/utility where you can see all available wireless networks, refresh the network list and connect to one of the networks. I should mention that my ISP set up a security enabled wireless network with WPA. This network requires a network key if you want to connect to it. I guess my Vista computer has the network key entered into it already. The problem is that I do not know what the network key is. Now obviously you would say just contact my ISP to get the key. And I will but there is just one extra weird issue. I am able to connect to another unsecured wireless network in the Wireless Network Connection window/utility. I can be on it as long as my Ethernet cable is plugged in. So this is not really wireless is it? And this indicates that even if I do get that network key password from my ISP, I will only solve one of the two problems I have. I will only solve being able to get online as long as I am connected to my router via the Ethernet cable. The Main Questions So how do I enable my acer IPN2220 Wireless LAN Card so that I can use my Acer laptop from anywhere with in my apartment? Or should I first get the network key from my ISP to access my security enabled wireless network? And then deal with getting the acer IPN2220 Wireless LAN Card working? Hard & Learned VS Easy & Stupid Of course contacting the ISP would be easier. Have em just come in here and do there thing. The problem with that is that they do not speak English (yeah, im in Poland) and it'd be a hell of a time trying to understand what they are doing (uncomfortable looking over their shoulder). Also, I want to learn how to do this task myself so that I can fix the problem if it ever happens again. You know, be more self sufficient. I look forward to helpful replies. Thanks, Xaviour

    Read the article

  • Ubuntu 12.04 + Wifi not working

    - by user171154
    i'm having problems connecting over wireless. At the moment, I'm using wicd. It seems to get stuck on "Verifying AP association...". Without wicd I can get the connection up and ping the Net - but if I take eth0 down (ifconfig eth0 down), my wireless goes away too (same result if I unplug the wire instead). wicd is the only way I can bring eth0 back (which is the main reason I'm using it) - ifconfig eth0 and/or ifup eth0 do not re-enable the connection (I just discovered it leaves out the gateway. Adding the gateway back in re-enables the connection including wifi; I didn't want to delete the info about wicd above in case it gives someone an idea.) Doing it manually, despite the errors (which it would be nice to also resolve) - allows me to ping the outside world: ifup wlan0 ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument ssh stop/waiting ssh start/running, process 17336 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=43 time=48.8 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=43 time=47.9 ms 64 bytes from 8.8.8.8: icmp_req=3 ttl=43 time=48.7 ms 64 bytes from 8.8.8.8: icmp_req=4 ttl=43 time=53.2 ms --- 8.8.8.8 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 47.975/49.711/53.235/2.063 ms # iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"TPLINK" Mode:Managed Frequency:2.427 GHz Access Point: 64:66:xx:xx:xx:22 Bit Rate=108 Mb/s Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=70/70 Signal level=-39 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:3 Missed beacon:0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: f0:7d:68:c1:b4:13 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-67-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:dfbf0000-dfbfffff ip route default via 192.168.0.1 dev eth0 default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 (For the record, I have no idea what the 169.254.0.0 address is doing there.) uname -a 3.2.0-67-generic-pae #101-Ubuntu SMP Tue Jul 15 18:04:54 UTC 2014 i686 i686 i386 GNU/Linux lshw -C network *-network description: Ethernet interface product: NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 01 serial: 00:11:11:59:fc:09 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5751-v3.23a ip=192.168.0.102 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:dfcf0000-dfcfffff *-network description: Wireless interface product: AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn] (PCI-Express) vendor: Qualcomm Atheros physical id: 0 /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback source /etc/network/interfaces.eth0 source /etc/network/interfaces.wlan0 /etc/network/interfaces.eth0 #Main Interface auto eth0 iface eth0 inet static address 192.168.0.102 netmask 255.255.255.0 gateway 192.168.0.1 /etc/network/interfaces.wlan0 auto wlan0 iface wlan0 inet static address 192.168.0.12 gateway 192.168.0.1 dns-nameservers 192.168.0.1 8.8.8.8 netmask 255.255.255.0 wpa-driver wext wpa-ssid TPLINK wpa-ap-scan 1 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk dca1badb5fd4e9axxx4xxdaaxxfa91xx610bxx6a7d57ef67af9809dxx6af42e39 /etc/wpa_supplicant.conf ctrl_interface=/var/run/wpa_supplicant network={ ssid="TPLINK" psk="my password" key_mgmt=WPA-PSK proto=RSN pairwise=CCMP group=CCMP } ifdown eth0 ifdown: interface eth0 not configured ifconfig eth0 Link encap:Ethernet HWaddr 00:11:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:213690 errors:0 dropped:0 overruns:0 frame:0 TX packets:155266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:220057808 (220.0 MB) TX bytes:21137696 (21.1 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196412 errors:0 dropped:0 overruns:0 frame:0 TX packets:196412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270697 (153.2 MB) TX bytes:153270697 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11335 errors:0 dropped:0 overruns:0 frame:0 TX packets:7287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2563290 (2.5 MB) TX bytes:855746 (855.7 KB) ifconfig eth0 down ifconfig eth0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:192 (192.0 B) TX bytes:94 (94.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196418 errors:0 dropped:0 overruns:0 frame:0 TX packets:196418 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270871 (153.2 MB) TX bytes:153270871 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11359 errors:0 dropped:0 overruns:0 frame:0 TX packets:7293 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2565482 (2.5 MB) TX bytes:856363 (856.3 KB) ip route default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. --- 8.8.8.8 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3024ms ping -I eth0 -c 3 router PING router (192.168.0.1) from 192.168.0.102 eth0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2015ms ping -I wlan0 -c 3 router PING router (192.168.0.1) from 192.168.0.12 wlan0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms Let me know if you need more info. Thank you in advance.

    Read the article

  • What is the most effective way to test for combined keyboard arrow direction in ActionScript 3.0?

    - by Relee
    I need to monitor the direction a user is indicating using the four directional arrow keys on a keyboard in ActionScript 3.0 and I want to know the most efficient and effective way to do this. I've got several ideas of how to do it, and I'm not sure which would be best. I've found that when tracking Keyboard.KEY_DOWN events, the event repeats as long as the key is down, so the event function is repeated as well. This broke the method I had originally chosen to use, and the methods I've been able to think of require a lot of comparison operators. The best way I've been able to think of would be to use bitwise operators on a uint variable. Here's what I'm thinking var _direction:uint = 0x0; // The Current Direction That's the current direction variable. In the Keyboard.KEY_DOWN event handler I'll have it check what key is down, and use a bitwise AND operation to see if it's already toggled on, and if it's not, I'll add it in using basic addition. So, up would be 0x1 and down would be 0x2 and both up and down would be 0x3, for example. It would look something like this: private function keyDownHandler(e:KeyboardEvent):void { switch(e.keyCode) { case Keyboard.UP: if(!(_direction & 0x1)) _direction += 0x1; break; case Keyboard.DOWN: if(!(_direction & 0x2)) _direction += 0x2; break; // And So On... } } The keyUpHandler wouldn't need the if operation since it only triggers once when the key goes up, instead of repeating. I'll be able to test the current direction by using a switch statement labeled with numbers from 0 to 15 for the sixteen possible combinations. That should work, but it doesn't seem terribly elegant to me, given all of the if statements in the repeating keyDown event handler, and the huge switch. private function checkDirection():void { switch(_direction) { case 0: // Center break; case 1: // Up break; case 2: // Down break; case 3: // Up and Down break; case 4: // Left break; // And So On... } } Is there a better way to do this?

    Read the article

  • MS-DOS 6.22 keyboard configuration

    - by AlexV
    I have MS-DOS 6.22 in a virtual machine (Virtual PC 2007) and I wanted to properly configure the keyboard. The keyboard I have is a French-Canadian one (FYI in Windows XP my keyboard is labeled "Français (Canada) - Français (Canada)" in the control pannel). What do I need to put in autoexec.bat and config.sys in order to use the keyboard properly (Windows 3.11 will be installed later if it matters)? I haven't configured DOS since like 14 years so all my references are lost/trashed now :)

    Read the article

  • The wireless connection could not be detected by other computer

    - by Rienna
    i tried to configure router pc in my linux ubuntu 10.04 . I use 2 connection to connect 2 client. 1st computer use LAN connection and 2nd use wireless connection. when i make new wireless connection in my ubuntu, the wireless that i make could not be detected by other computer that use wireless connection.i have tried to use windows and ubuntu as a client but it doesn't work. Maybe there's someone who know about it. Please share :)

    Read the article

  • How to type french accents with a US Apple keyboard in Windows 7 (EN) with Boot Camp

    - by Nicolas
    Hi, Everything's in the question. I have an iMac running Snow Leopard with a US Apple keyboard, and I've installed Windows 7 (english) with boot camp. I need to be able to type French accents but I don't really anyway to do it. I tried the way I did on Snow Leopard with the ALT + E and E for instance to make an e acute and even the Windows way with ALT + 1 3 0 but no luck. Any of you have something to suggest to me? Cheers, Nicolas.

    Read the article

  • What Is the Keyboard Shortcut for Moving to Last Message in Mac OS X Mail.app?

    - by Philip Durbin
    I'm on Mac OS X 10.5.8 (Leopard). In Mail, I have the first message in my Inbox selected and I'm trying to navigate to the last message using my keyboard. In Thunderbird, I just hit the End key, which for me is "Function-right arrow" because I'm on a MacBook Pro. In Mail, with the first message selected, if I hit "Function-right arrow" (i.e. End), the scroll bar moves down, allowing me to see the messages at the bottom of the list, but the first message at the top of the list is still selected. What I want is for the last message to be selected. I've tried lots of key combinations and searched for the answer but haven't been able to find it. Please help. I posted this originally at discussions.apple.com but the only advice I received was to file a bug with Apple, which I did.

    Read the article

  • Keyboard shortcut to quickly jump to the URL address field in Firefox...

    - by James Burton
    Hi, in Firefox I very often want to quickly enter a new URL in the address field. Therefore it would be very nice to be able to quickly jump to the URL address field with a keyboard shortcut! Today I must move my mouse and place the cursor in that field and also ensure that the current address is selected so I can overwrite it when entering the new URL. Very annoying! I'm sure I'm not the first one to have this need so there is probably a shortcut or an extension that does this already, but I cannot find that information! Thanks in advance, /James

    Read the article

  • Upgrade AirPort on Macs to support Snow Leopard's Wake on Wireless/WLAN?

    - by wojo
    Snow Leopard now supports Wake on WLAN, but not all hardware supports this. For example, my Octo Mac Pro from early 2008 has an AirPort card, but it does not support this. Nor does my 2007 2.33GHz MacBook Pro. For reference to what is needed, look at http://www.macrumors.com/2009/08/28/a-closer-look-at-snow-leopards-wake-on-demand-feature/ which includes a screenshot of what the System Profiler should show. It's pretty hard to find Apple parts, but is it possible to put newer cards into these machines to have them support Wake on Wireless?

    Read the article

  • How to change 802.1x settings for Wireless in Windows XP SP3?

    - by mspoerr
    Hello, I want to configure EAP-TLS with Machine Authentication ONLY for a wireless network. The supplicant is the bulit-in supplicant in Windows XP SP3. I found the following document: http://support.microsoft.com/kb/929847 - How to enable computer-only authentication for a 802.1X-based network in Windows Vista, in Windows Server 2008, and in Windows XP Service Pack 3 But unforunately the needed command "netsh wlan" is not available in Windows XP - "Note Windows XP SP3 and earlier versions of Windows XP do not support the netsh wlan command." How can I change the settings without the "netsh wlan" command? Thanks, mspoerr

    Read the article

  • What is the best way to setup a public and private wireless access point on the same home network?

    - by Dougman
    For my home network (with internet provided from a cable modem) I would like to setup a secure wireless access point that I use for all of my personal connections (home PC, iPhone, Xbox, etc) and also another public access point that friends and folks in the neighborhood may connect to (for good karma). I want to ensure that my private traffic cannot be accessed from users of the public access point. I currently have one router that is running the Tomato firmware that I use with WPA security. What is the best way to accomplish this kind of setup securely (if it is possible in a home environment)?

    Read the article

  • Compaq nc4200 screen cutting out and keyboard lagging after dropping - could I repair this?

    - by Holly Gray
    I have a HP Compaq nc4200 laptop. I got it from a family member who no longer needed it, who got it from a sale of old office equipment, so it's at the very least third-hand, and somewhat battered. Today, I dropped it. It seemed unharmed at first, but the screen cuts out every few minutes (sometimes seconds), then fades back. Keyboard input also occasionally starts lagging, as does the mouse. It might be a coincidence, but, oddly, it seems as if, when the screen cuts out, it comes back sooner if I use the trackpad. Is this something that I could fix? What might be causing it?

    Read the article

  • What options do I have for creating customized keyboard shortcuts?

    - by Moses
    As I am getting more heavily into programming as a job and no longer as a hobby, I am definitely in need of some ways to improve my productivity. One thing that would definitely help in that respect is being able to create customized keyboard shortcuts for text/code snippets. For instance, holding down CMD+L+O+R+E+M will output a paragraph or two of the Lorem ipsum filler text, or CMD+F+U creates a function declaration. What I am ideally looking for is a database where I can store formatted text snippets, bind them to my choice of keystrokes, and then have the text paste whenever I perform the associated keystrokes. Are there any stand-alone applications that can do this for a Mac. Also, are there any text editors / IDEs that have this ability built in?

    Read the article

  • Option and command keys in OSX are swapped and keyboard preferences do not set them back.

    - by bikesandcode
    On my MacBook pro, I occasionally use external keyboards, generally Windows ones and things have been fine. Yesterday, I plugged in a new one, remapped the command/option keys so the windows/alt keys were in the same configuration, again, nothing new here. However, this time when I unplugged the USB keyboard, the laptops option/command keys remained switched. More annoying is that if I go into the System Preferences - Keyboards - Modifier keys, remapping the keys to actions does not work. I can use the drop downs to disable any specific keys, but switching the behaviours does nothing. (Cmd/Option obvious, tried remapping anything to caps lock and a few other combinations, no joy. Restore defaults set the configuration to what I'd expect, but the settings are evidently ignored.) So: Any ideas?

    Read the article

< Previous Page | 73 74 75 76 77 78 79 80 81 82 83 84  | Next Page >