Search Results

Search found 64721 results on 2589 pages for 'windows usb drive'.

Page 771/2589 | < Previous Page | 767 768 769 770 771 772 773 774 775 776 777 778  | Next Page >

  • How do I resolve BSOD: PAGE_FAULT_IN_NONPAGED_AREA?

    - by Burnzy
    I have been trouble shooting this for a few days and cannot fix this anyhow. Computer specifications Mobo: ASUS Sabertooth X58 LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard CPU: Intel(R) Core(TM) i7 CPU 920 (Bloomfield) @ 2.67 ( no OC ) RAM: 6144MB RAM GPU: 2x NVIDIA GeForce GTS 250 1Go in SLI (sli is not enabled anyway at the moment anyway) Drives: OCZ RevoDrive OCZSSDPX-1RVD0120 PCI-E x4 120GB PCI Express MLC Internal SSD [RAID-0]. (I know this could potentilly cause trouble but I had the BSOD before using this drive) Seagate Barracuda 7200.11 ST31500341AS 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive - Bare Drive Click here for a log of a crash I just had. Click here for a log of a crash I had 30 minutes later, note that it's another driver. Some info Occurence: It seems pretty random so far, haven't noticed any kind of pattern I tried: Windows memory diagnostic (went smoothly at 1066mhz) As I said, it was still happening on my HDD, so when I bought the revodrive I install a new OS on there and still got the error, I believed it happened and I had no drivers installed at that point (not 100% sure) Change the following registry value to 1 (true): HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SessionManager \MemoryManagement\ClearPageFileAtShutdown Tried to lower even more ram clock Made sure ram timing was set to recommended by manufacturer Verified if motherboard was in good physical condition (yes and its brand new) There is one thing to note, when I got the new motherboard, I installed the new drivers WITHOUT formatting and the I removed the motherboard drivers that I could remove from the control panel (pretty much the first things that have been installed). Could this cause an issue even ON THE OTHER drive (revodrive). Hopefully someone can help me, I am getting tired of this, spending so much money and cannot get this to work correctly. If you need any other information let me know, thank you!

    Read the article

  • Where is my free space?

    - by Andrey
    A week ago I got a low disk space warning on my Vista x64 Ultimate box - 60 Mb free on the disk C; I cleaned up some downloaded msdn images and got 20 Gb freed up. Three days ago I got another notification, it looked suspicious but I didnt have time to deal with it and just moved some heavy stuff to another drive to free up about 17 Gb.... Today morning - 53Mb left on drive C, again! Now it looks really suspecious, so I downloaded TreeSize to see what's taking up the space, just to see it reporting only 121 GB out of 200 GB used, in other words I suppose to have about 79 Gb free. Then I went to Folder Options, enabled viewing of system and hidden files, rerun teh tool to see another 5 Gb added (which is expected). Then I open disk C in windows explorer, select all and right click Properties, to see it reporting teh same amount of files - 126 Gb. But when I look at Drive C properties, it reports that 200GB of 200 Gb are taken. I just scanned the drive with two different antiviruses - Symantec and AVG and found no viruses... I'm a little confused at this point, any ideas where is my free space, woudl be highly appreciated! Thank you! Andrey

    Read the article

  • Skip all warning prompts on ACPI shutdown?

    - by N Rahl
    When I issue an ACPI shutdown command to a Windows XP guest machine from the host VM server, I want Windows to shutdown. The problem is, Windows always wants to ask some question or another, rather than just shutting down. I need shutdown to be reliable, no matter what is running or going on, so I can automate shutdowns from the host machine. But I want it to be as graceful as possible, rather than just pulling the plug. Some problems: If a user is logged in, ACPI shutdown causes a box to appear that says, "are you sure you want to shutdown while other users are logged in"? And this prevents shutdown until someone connects to the machine and clicks "yes". In this case, it should try its best to gracefully log out all users, using force if necessary, and then shutdown without promoting. Busy or non-responding programs or programs asking to save data can prevent Windows from shutting down until a user answers a prompt. This should attempt to save data, wait maybe 30 seconds for non-responding programs, but should get aggressive with stubborn programs. "nope, time's up! 3,2,1, Goodbye!" Is there a registry setting that I can change from: ACPI_Shutdown: "Shut down if Windows feels like it" to ACPI_Shutdown: "Just do it. Kill programs, bump users, try to be graceful about it, but when I come back, I expect you to be off." This should respond to the ACPI shutdown command, and not be a script on windows, unless that script is triggered by the ACPI power button. I'm hoping this can be changed with registry options.

    Read the article

  • On dual boot system, Is it possible to use VirtualBox to boot other installed OS?

    - by Derek Ziemba
    I currently run Windows 7 from a 256GB SSD as my Operating System. Lately, for school, I've been using openSUSE linux inside a VirtualBox PC and I'm really liking it. I'm starting to hate even working in Windows. But I can't just abandon Windows. I've been considering dual booting openSUSE and will likely purchase another SSD for openSUSE. Once I have the dual boot set-up, there is going to be times I need to do something quick in the operating system that I'm not currently in. It would be a pain to have to reboot the computer each time I need to switch the OS for a simple task, especially from Windows since it doesn't let you save it's state. From openSUSE, I want to be able to start a VirtualBox Machine using my Windows Drive. And in Windows, I want to be able to start a VirtualBox Machine of my openSUSE Drive. Would this be possible? The issue I'm worried about is drivers. For instance, the OS will be installed on native hardware and have the native hardware's drivers configured. When I try to boot the OS in a VirtualMachine, I feel like the OS is not going to know what to do, and have to reconfigure itself or just not work.

    Read the article

  • How to configure SCSI hard drives and RAID for Poweredge 2850 web server

    - by Saul
    I'm trying to set up a Poweredge 2850 as a web server, but as a server novice it's causing me some confusion. Its a virgin install so no data to be lost as yet, so I'd like to get the best arrangement for setting up Windows Server 2008. The box will run IIS, a mail and FTP server. The current physical arrangement of the hot swap drives is 1 73GB 3 146GB 5 blank 0 73GB 2 146GB 4 146GB (but flashes green, amber off) When I enter the PERC config screens on boot up I've got Raid Ch- 0 ID 0 ONLIN A00-00 1 ONLIN A00-01 2 ONLIN A01-00 3 ONLIN A01-01 4 HOTSP I think that drives 0 and 1 are set to RAID 1 and drives 2 and 3 are also set to RAID 1, certainly I can see 2 logical drives, both raid 1 of 69880MB and 139900MB Now what I think I am getting here is that the 2 73GB drives mirror each other and the 2 146GB drives mirror 2? so by my noob thinking if a drive fails I can pull it, insert and new one and it will reduplicate from its matching pair? I think the flashing amber probably indicates a failing drive in slot 4, should that just be binned? What confuses me coming from a home user XP background is that when I load up Windows Server 2008 OS under my computer I only see a C drive of about 70GB capacity. i.e wheres the 146GB drive? Any advice appreciated

    Read the article

  • Do registry issues with Win7 persist through a recovery from a system image?

    - by user59089
    So I need a bit of advice, please; here's my situation: I have 1) a system image on an a brand new external 1 TB SATA drive, that I managed to successfully capture before my 2) primary system drive went down. I realize this is a fairly simple matter of buying a new primary drive and performing the recovery to the fresh disk...however, the issue is that I believe Win7 was also having some significant issues of its own--basically, Update unable to install updates, and Backup continually ditching the auto backup schedule. I'd been trying to address those issues when my system was still working, but it's been so fruitless, I'm convinced a Win7 re-install would be best, and now I'm concerned that if I was in fact having what I believe are likely registry-related issues before, that these will persist through a recovery--would that likely be correct? I'm mainly worried about recovering my files, so if I did a full recovery from the image, should I be able to then access my individual files, and copy them manually to an external drive, so I can then do a full re-install of Win7? Sory if this seems obvious, but I've never done a recovery before and just trying to make sure there's no red flags with what I have in mind...

    Read the article

  • Passive FTP Server Port Configuration Troubles Win2003

    - by Chris
    Win2003 Ports 20 & 21 are open IIS6 - Direct Metabase Edit enabled Configured FTP service passive range to 5500-5550 5500-5550 added to windows firewall iisreset and double checked by restarting ftp service nothing has changed, when I connect and enter passive, it still hangs when ever I try to LIST or transfer files. Active is just as useless. Microsoft Windows [Version 6.1.7600] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\user>ftp ftp> open x.x.x.x Connected to x.x.x.x. 220-Microsoft FTP Service xxxxxxxxxxxxxxxxxx 220 xxxxxxxxxxxxxxxxxx User (x.x.x.x:(none)): user 331 Password required for user. Password: 230-YOUR ACTIVITY IS BEING RECORDED TO THE FULLEST EXTENT 230 User user logged in. ftp> QUOTE PASV 227 Entering Passive Mode (82,19,25,134,21,124) ftp> ls 200 PORT command successful. 150 Opening ASCII mode data connection for file list. and it hangs.. Now I can see from microsooft documentation that on newer windows releases, additional steps such as these are suggested, but they dont work on 2003... netsh advfirewall firewall add rule name=”FTP Service” action=allow service=ftpsvc protocol=TCP dir=in netsh advfirewall set global StatefulFTP disable is there anything I am missing, what is this StatefulFTP malarkey at the end EDIT I can connect and transfer binary files using WinSCP client - Therefore the problem must be with my ftp commands no? Can anyone see anything wrong with my windows ftp client example? why would it hang on ls, i tried QUOTE LIST as well, and that just hangs, and the windows ftp client doesnt work in active, it hangs if I try to go "binary" then put - This worked before I added 5500-5550 on the router. I have since added this range to the router but no difference to the windows ftp client.

    Read the article

  • Installing WindowsAuthentication breaks authentication / web.config?

    - by Ian Quigley
    I have a clean Windows 2008 R2 box (on a VM) and have installed IIS 7.5 with default options. I then copied a website to it (from Windows 7, IIS 7) and after a little tweaking the website is working fine. The website is currently using and working with Anonymous Authentication. I have gone back to the Windows Components/Sever Manager, Roles - Security and ticked and installed Windows Authentication. When I check my server in IIS (top level above sites) - Authentication, I see Anonymous Authentication (enabled) ASP.NET Impersonation (disabled) Forms Authentication (disbaled) Windows Authentication (enabled) When I check my default website - Authentication, I see as above but "Retrieving status" and an error dialog saying There was an error while performing this operation. Details: Filename c:\inetpub\wwwroot\screwturnwiki\web.config Line number: 96 Error: This configuration section cannot be used in this path. This happens when the section is being locked at the parent level. Locking is either by default (overriderModeDefault="Deny"), or set explicity by a location tag with overrideMode="Deny" or the legacy allowOverride="False". I have tried hand editing the web.config with no success. UN-installing Windows Authentication happily returns my site to working with Anonymous Authentication, and allows me to enable/disable these three options. FYI. I am using ScrewTurnWiki with the Active Directory plug in.

    Read the article

  • How to configure networking on an appliance such that it can plug and play on any corporate network?

    - by Joshua Lim
    I had a chance to configure a Moxa NPort device server appliance on my client's network, it was very easy to do so, done in just 2 minutes. Here's what I did:- The Moxa device server had a preset IP address of 192.168.127.254 and subnet mask 255.255.255.0 - http://www.moxa.com/doc/manual/nport/5400/NPort_5400_Series_Users_Manual_v4.pdf Moxa provides a Windows software which I used to "scan" for the device server. It worked like magic! The software returns a list of device servers found. Each device server is identified by MAC address, and by selecting the device server using the software, I can reset the default IP address and subnet mask of that device server! In comparison, during an earlier project, I spent 2 hours trying to get KVM to work for a Windows 7 embedded appliance I'm trying to install in my client's network - http://superuser.com/questions/380305/how-to-configure-windows-7-professional-appliance-pc-on-my-clients-network-usin Prior to that, I have already tried pre-configuring the IP address and subnet mask to the one which my client provided, yet the appliance still can't connect to the client's network! I've also tried cross cable, didn't work either. After KVM worked, I discovered that the network settings were "lost" after I plug the machine into the client's network. Now my question is what can I do to setup my Windows 7 embedded appliance so that it can connect to any network like that the Moxa device server? I tried experimenting this on my network using a Windows machine configured to an IP address of 192.168.127.254 and subnet mask 255.255.255.0, but it doesn't connect to my network that uses 192.168.0.*. :( EDIT: I would like to point out that the Moxa Windows configuration software seems to be able to connect to any Moxa device connected to the network even if it is on a different subnet, as long as the network adapter shows "connected". This is important because the Moxa device has no VGSM port or interface to configure the IP address.

    Read the article

  • Why can't I update Adobe Creative Suite?

    - by Lynda
    I am attempting to check for updates using the Adobe Application Manager on Windows 8 and I get this error: The update server is not responding. The server might be offline temporarily, or the Internet or firewall settings may be incorrect. I have seen this error before on Windows 7 and remembered that I needed to disable the Microsoft Virtual WiFi Miniport Adapter. I navigated to the correct place but the Miniport Adapter was not there. After a bit of searching across several forums I saw a recommendation to change <logLevel>2</logLevel> to <logLevel>10</logLevel>. I attempted that and again it still did not work. I have also tried disabling my anti-virus protection and disabling Windows Firewall. Neither worked. I am not sure what else to try or do at this point. Are there any other recommendations to solve this issue? Notes: I am running Windows 8 Pro using the Creative Cloud Version of CS6. I check for updates by choosing Help Updates from within any Adobe Application This issue was not present in Windows 7 before I upgraded to Windows 8 I originally posted this question on the Adobe Forums and received no help there.

    Read the article

  • How can I make Internet Explorer 6 render Web pages like Internet Explorer 11?

    - by gparyani
    Now, I know that this may seem like a bad question in that I can just upgrade to Internet Explorer 8, but I am sticking with IE6 in that IE8 removes valuable features, like the ability to save favorites offline and the fact that a file path turns into a Windows Explorer window and typing a Web address into Windows Explorer changes it into an IE window. I know that Internet Explorer 6 does a really bad job at rendering some pages. I know of the Google Chrome Frame extension that brings Chrome-style rendering into IE, but that will soon be discontinued. So, I tried another thing: I know that C:\Windows\System32\mshtml.dll contains the Trident rendering engine that is used by IE, so I tried something: I first backed up the original file by renaming it on Windows XP to mshtml-old.dll, then I tried to copy in the DLL from a computer running Windows 7 with Internet Explorer 10. I noticed that, after copying, the system had replaced the new DLL with the old one, but left the one I backed up intact. Is there any way I can get the system to not replace the DLL like that so that I can transfer in IE11's mshtml.dll into Windows XP and make IE6 render like IE11? I'm looking for an answer that describes how to tweak my system to make IE6 render like IE11 (or IE10), not one that tells me to upgrade IE or install another browser. I don't care how tedious the method is, just as long as it works.

    Read the article

  • What are some of the best answer file settings for a WDS Deployment?

    - by drpcken
    I've had my head buried in answer files for days now and have gotten quite comfortable setting them up, test, etc... I use a handful of Components to help my migrations, for my unattend.xml I like: Windows-International-Core-WinPE -- this is good for setting Locales the preboot environment (en-us for us english US speakers). Keeps me from having to set these on the initial image boot. Windows-Setup_neutral -- I like the WindowsDeploymentServices -> ImageSelection, especially if I'm only pushing a single image. This keeps me from having to select it each time. My OOBE_Unattend.xml is really useful and I barely have to touch anything during this part of the installation: Windows-Shell-Setup_neutral -- This lets me put a ProductKey in for my MAK volume license (very useful and time saving). I can also set the TimeZone for the installation. Windows UnattendedJoin_neutral -- I couldn't live without this component. It joins the machine on my domain before logging in as a domain administrator. I would hate to not have this ability. Windows-International-Core -- Again this component really speeds up the OOBE process. I configure my locals and time zone so I don't have to do it by hand when the machine enteres OOBE. Windows-Shell-Setup -- Allows you to configure an autologon when the new machine is finished. I like to logon as a domain admin automatically for customizing and troubleshooting the new machine immediately after it is imaged. Also the OOBE component under here lets me skip the EULA, Hide Wireless Setup, and set my default NetworkLocation. All of this makes the entire OOBE totally automated. What are some other good components I am missing as far as helping me get these images pushed and configured as quickly as possible?

    Read the article

  • New SSD, is the MBR broken? DISK BOOT FAILURE

    - by Shevek
    I've been running Windows 7 on a WD 500gb SATA single drive, single partition setup for some time with no issues. I've just installed a new Kingston V Series 64gb SSD and performed a clean install of Win7 to it, deleting the partitions on the 500gb and using that as a data drive. All was well for a few reboots but then I started to get "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER" messages. If I put the Win7 install DVD back in the drive it boots fine. Tried a clean install again, after replacing SATA cables and swapping SATA ports, with a complete partition wipe of both drives. Again, rebooted fine a few times then back with the "DISK BOOT FAILURE" error. Looked on the web and found some discussions about it so I then started from scratch again. This time I wiped the MBR on both drives using MBRWork, disconnected the 500gb and reinstalled to the SSD. Removed the install DVD and installed all the drivers which involved many reboots, all with no problem. To make sure I also did a few cold boots as well. Reconnected the 500gb, initialised, partitioned and formatted it. Copied data to it and did some more reboots and shutdowns. All was ok. Then out of the blue comes another "DISK BOOT FAILURE" and again, if the Win7 install DVD is in the drive it boots fine. So, is the SSD a bad'un? TIA UPDATE: It was a BIOS issue! I found a hidden away option for HDD boot order, which was separate from the usual HDD/CDRom/FDD boot order option. The WD was set to boot before the SSD... Swapped them round and all is well. Still don't understand how it worked at first though... Thanks Solaris

    Read the article

  • Apache runs in console but not as a service?

    - by danspants
    I have an apache 2.2 server running Django. We have a network drive T: which we need constant access to within our Django app. When running Apache as a service, we cannot access this drive, as far as any django code is concerned the drive does not exist. If I add... <Directory "t:/"> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> to the httpd.conf file the service no longer runs, but I can start apache as a console and it works fine, Django can find the network drive and all is well. Why is there a difference between the console and the service? Should there be a difference? I have the service using my own log on so in theory it should have the same access as I do. I'm keen to keep it running as a service as it's far less obtrusive when I'm working on the server (unless there's a way to hide the console?). Any help would be most appreciated.

    Read the article

  • Computer always freezing after random periods of time. No errors listed.

    - by Wesley
    Hi, all. Here are my specs beforehand: AMD Athlon XP 2400+ @ 2.00 GHz, 160GB IDE HDD, 128MB GeForce 6200 AGP, 2 x 512MB PC3200 DDR RAM, CoolMax 350W PSU, 1 x CD-RW Drive, 1 x DVD-ROM Drive, FIC AM37 Mobo, Windows XP Pro SP3 My desktop freezes after random periods of time but there are no errors listed in the Event Viewer after a forced shutdown and restart. A couple months ago, I found that when it froze, the floppy was being accessed at the same time. So, I disconnected the floppy (since I never used it anyways) from the power supply and motherboard. Everything was working fine and the computer never froze. This past Christmas break, I left for a Conference and when I got home, the computer kept freezing again. So, this time, I just disconnected the DVD reader (from mobo and power) and started it up. Still, it froze almost right away. Then I found some older sticks of RAM (2 x 256MB PC2100 DDR) and swapped them in. Everything worked fine again after that. I even swapped the 2 x 512MB PC3200 DDR RAM back in and everything worked okay. Then it started freezing again, and I tried all possible RAM combos, still freezing within 5-10 minutes of startup. One thing I've realized is that the floppy drive is still listed in My Computer and I uninstalled it from my Device Manager already. There were no software errors, and I uninstalled the most recent software, with no effect. Still, I have no idea what is wrong because everything ran fine before that. Any suggestions? EDIT: Still have yet to buy some blank CD media to use Memtest86+. However, would a lack of virtual memory cause the computer to freeze? EDIT2: So after a long time, I ran Memtest86+ and all is well. Turns out though, after removing my original DVD reader and replacing it with a DVD-ROM drive, there is no freezing whatsoever! Thanks for all your suggestions!

    Read the article

  • CUPS printer on Vritual Machine can be access via CUPS admin, but not by XP?

    - by SJaguar13
    I have a Zebra label printer connected to a Linux Mint virtual machine. It was set up with CUPS and a Windows XP computer can then print to it via http://192.168.1.76:632/printers/labelprinter. That was all fine and dandy I then hooked up a Fargo Pro L PVC card printer to a Windows XP virtual machine. I had to disconnect the label printer as the server that hosted both virtual machines only has 1 parallel port. Now I plugged in the Zebra again, and it cannot print from the Windows XP computer anymore. If I go to the CUPS admin panel on the Windows XP computer, I can see it, everything looks fine, and I can send it a test page to print which works. If I try to print from Windows, I get an error that the printer is not found/cannot connect to the server. The only other thing that changed was the firewall on the router to allow remote desktop to another computer from outside the network, but all the firewall stuff was for external use. Nothing affected the IP address of the internal network. The Linux Mint VM also had a PDF pritner that was shared with CUPS. That printer is also down. I tried setting up a new CUPS installation on another VM, and when I go to share it with XP, I get the same error. I don't know what to try. It has access, it can get to the admin from that computer, it seems to be up and ready, but when Windows tries to connect, the printer isn't found even though 4 days ago everything was fine. Any ideas?

    Read the article

  • How do I rename my old Program Files folder?

    - by SteveJ
    I installed a new SSD as my boot drive (C:), installed a fresh version of Windows 7 64-bit, and kept my existing SATA drive in the system (D:). I want to keep using my D: drive for file storage (no sense filling up the SSD with stuff that isn't performance critical) and I haven't formatted the D: drive because there's stuff on there I want to keep. I also want to create a new "D:\Program Files" folder so I can install apps that aren't performance-critical there. So I decided I'd rename the existing "D:\Program Files" from my old Windows install to "D:\Old Program Files" and then create a new "D:\Program Files" directory. Easy, right? I can see "D:\Program Files" just fine in Explorer. I right click, select Rename, and type "Old Program Files." I get the alert that says I need Admin permission to do this, so I press the confirm button with the shield. But the folder still appears as "Program Files" in Explorer. I jump out to the command line, and it appears as "Old Program Files" when I do a dir. I can even do mkdir "Program Files" and when I do a dir they both appear. But in the Explorer GUI, it looks like I have two "Program Files" folders. This will be confusing during app installation because I won't be able to tell which one is which. I've tried poking around in the properties tab of the old folder, but can't find anything that would explain what's causing the issue. How do I rename the old Program Files folder?

    Read the article

  • Fedora installed in Legacy mode, how to make it work in UEFI?

    - by TryntaLearn
    I am trying to install a linux distribution on my new laptop. It's an MSI GE40 which comes preinstalled with windows 8. It's a UEFI machine. I have tried installing Ubuntu and Fedora with limited success. I've tried: running it in UEFI, UEFI with CSM mode, with secureboot enabled, ... with secureboot disabeled, ... with secureboot enabled but in user mode. I have had no success with any of these methods. With Ubuntu the grub loader shows up, but when I pick 'try ubuntu', or 'install ubuntu', it's just a blank screen(I've been using liveusb's btw). With Fedora, it'll show me the next screen on which it says 'binary authorised by vendor certificate' or 'Secure boot not enabled' and then stop doing anything. The closest thing to success I reached was switching to legacy mode to install Ubuntu, in which case I was able to get to the ubunutu installer but it wouldn't recognize windows 8 on my computer, so instead of continuing on I rebooted, and removed the USB pendrive to find my computer couldn't find windows 8. After a little dicking about I got it to find windows 8 again. Any ideas on how I should go about trying to install a distro on my computer? UPDATE:- So I ended up installing fedora using Legacy mode. To use both it and Windows at boot, I manually enter automatic repair so I can get to my UEFI settings and switch boot mode to UEFI to boot windows 8. I guess my question needs to be modified as to how do I get all of this to work in UEFI mode, so I can dual boot via selection through a bootloader, and not by repeatedly switching boot mode.

    Read the article

  • Permanent fix for unicode characters not displaying correctly (as boxes)

    - by Chase
    Please read this entire message before replying. First I know how to fix the issue on a temporary basis. I am looking for a permanent fix. I work with foreign language files a lot. Unfortunately sometimes all the unicode characters in windows explorer, notepad, and other places (as rendered by windows, probably GDI) do not display correctly. That is they display as square blocks, where as they had just been displaying correctly. There are countless methods to temporarily correct the issue. But again, I want a way to permanently resolve the issue. What I have tried: The silly "Hide fonts based on language settings". This setting only applies to what fonts you see in the fonts folder and font dropdowns. It doesn't disable foreign fonts (doesn't work, or if it does, it is temporary). Deleting the font cache file and rebooting (works.. usually, temporary solution). Changing my locale and then back (sometimes works, temporary solution). Rebooting my PC and getting lucky (50-50 chance, temporary solution). Changing my keyboard input/adding foreign keyboard (temporary solution that only seems to work once). Reinstalling windows (temporary solution, sometimes lasts a few months though, I have done this 7 times across 3 computers) What I have not tried: Buying Windows Ultimate and installing the interface packs. This is not a solution. I can't read Japanese/Chinese and I do not want my interface in those languages. What I will not do: Switch to a different brand operating system (unix, linux, mac os x) Switch to an older version of windows (Windows Vista, XP, 2000, etc). So can anyone recommend a permanent fix for the problem?

    Read the article

  • Webcam security camera software that runs as a service

    - by hurfdurf
    I've been looking for Windows webcam software that will run as a Windows service without any user login. The goal is to use the webcam as a cheap security camera and log the results to secure networked storage (windows share, not FTP). The requirements are: Motion detection Video capture Runs as a service (should start recording immediately after reboot) Nice to have: Round-robin storage, e.g. 10Gb limit, oldest files overwritten/deleted when space gets low I've read the other webcam questions but still haven't stumbled across anything suitable. Evaluations thus far: Title MotionDetect Service Snapshots Video SpaceLimit License Yawcam Yes Yes Yes No No GPL WebCam ZoneTrigger Yes No Yes Yes No Commercial Dorgem Yes No Yes Yes No GPL AbelCam Yes No Yes Yes No Commercial Logitech Yes No Yes Yes No Paired with camera IspyConnect Yes No Yes Yes Yes Free SecureCam (SourcefoYes No Yes Yes No GPL AbelCam Yes No Yes Yes No Commercial Active WebCam Yes Yes(?) Yes Yes Volume Free Commercial WebCam Surveyor Yes No Yes Yes No Commercial WebCamsPy NA NA NA NA NA GPL Camera: Logitech Webcam Pro 9000 Windows 7 32-bit WebCamsPy failed to initialize so couldn't be tested So far, the contenders: Active Webcam comes the closest, and claims to run as a service, but i haven't been able to get it to record after a cold boot even though a service is running. Yawcam can be set up as a service but doesn't record video. IspyConnect has exactly the type of space limit I want and looks great, but doesn't run as a service (seems also to be a bit of a cpu hog) Any other suggestions? I'm locked into Windows so can't use linux Motion, which looks almost perfect. Any pointers to rich Windows webcam/motion detection libraries out there that could easily be turned into a command line program would also be appreciated.

    Read the article

  • How do I recover drivers from other hard disk

    - by Carl
    The drivers for a Cardbus (PCMCIA) card that gives me 2 USB 2.0 ports are on the hard disk from my old laptop. I have lost the driver CD. I have a way to get files from that other hard disk. Which files do I need? The drivers for the card used to be on the following website - the information is still there, except the download links don't work: http://www.ht-link.com/en/DownView.asp?ID=10 - The drivers I need are the first listing - The Win XP drivers for the HT-112NEC. My e-mails to them have not been answered. The information on this card is here http://www.ht-link.com/en/ProductView.asp?ID=106 I already tried connecting that other drive to my new laptop (via USB) and adding the drive to the search criteria when selecting update driver in the Device Manager. It says there isn't a better match, and if I select manual the matching device is not listed. (I don't think "manual" sees drivers on the external hard disk - but only ones on the main drive and/or found listed in the registry.) I would try 'have disk' if I knew exactly what file to point to on the external drive. The drivers are on that hard disk - I installed them there, and used that card on that computer. The new laptop has Windows XP Pro SP3, the old one had Pro SP2 Thanks for any help.

    Read the article

  • Cannot write to directory after taking ownership

    - by jeff charles
    I had a directory on an internal hard-drive that was created in an old Windows 7 install. After re-installing my operating system, when I try to create a new directory inside that directory, I get an Access Denied message. This isn't a protected directory, just a random directory I created at the drive root (that drive was not the C drive in either install). I tried to take ownership by opening folder properties, going to the Security tab, clicking on Advanced, going to Owner tab, clicking on Edit, selecting my user account, checking Replace owner on subcontainers and objects, and clicking Apply. There were no error messages and I closed the dialogs. I rebooted, checked the owner on that folder and a couple subfolders and it appears to be set correctly. I am still getting an Access Denied message however when trying to create a directory in it. I've also tried using attrib -R . to remove any possible readonly attribute inside the directory in an admin command prompt but am still unable to create a directory using a non-admin prompt (it does work in an admin prompt). Is there anything I can do to get write access to that folder and it's subcontents in a non-elevated context without disabling UAC?

    Read the article

  • Questions about explorer.exe

    - by nmuntz
    Hi, I was given by my company a laptop with Windows XP Professional in Spanish. I would like to translate it to English, since I really DISLIKE to use localized versions of programs. I have read about Windows MUI packs, however you MUST have Windows XP Pro in English in order to translate it to other language, you can't translate it TO English from other language. Since reinstalling the OS using a Win XP CD in english is not an option (don't have the license nor the CD, and don't have domain privileges to rejoin my computer to the domain), I was wondering what are the essential files that contain localized strings of text. I was doing some research, and apparently explorer.exe has many of the Windows Error Messages and other strings. Will replacing my original explorer.exe with one from Windows XP in English be enough (and work) for having a "basic" english version of windows? Im mainly interested in having error messages, start menu, and the control panel in english. Also, does it HAVE to be the same version as the Service Pack im running? Besides explorer.exe are there any other essential files that i should try to get and replace? Do you see any "dangers" in replacing this files with english version ones? Thanks in advance for your help.

    Read the article

  • Looking for advice on using dd to backup a dual boot laptop.

    - by AvatarOfChronos
    My questions boils down to this. If I do "dd if=/dev/sda of=usbdrive" can anybody confirm that this will get everything including mbr/partition information/all four partitions and create a drive that I can swap with the failing internal drive without losing anything? If this is done while the computer is running will it still copy everything? At this point I'm afraid to shutdown the computer for fear of it never starting again. Secondly, how tolerant is dd of failing drives? Has anybody used it to recover a half dead drive before that can share any potential pitfalls? Did it get the data ok or is this going to be a hope for the best kind of situation? And lastly, If the usbdrive is larger than the failing internal drive I'll still be able to expand the partitions later so I'm not losing space? this last part seems silly to ask but with my current streak of bad luck I'll end up overwriting some magic bit and forever turning a 640gb hdd into a 500gb hdd. Also if anybody has a better solution to create a complete clone that gets everything I'm all for hearing about it. PostScript: I had been making periodic backups however when whatever miasma that killed the laptop struck it also got the NAS :( Post PostScript: both devices were on a UPS system.

    Read the article

  • One Way Sync with Dropbox?

    - by user244805
    Is there any way I can mirror a dropbox folder to my C drive by just running a portable file? Extra background information because I know you guys hate it when you don't get the entire situation: I go back to University in fall and I need a new storage solution. I decided to use DropBox to sync my tiny University files (< 5 MB). I need to access these files from 4 machines: Windows 7 Home machine Windows 7 University A machine Windows 7 University B machine Android tablet 1 and 4 are a non-issue. The problem lies with 2 and 3. I want to be able to edit my files on 2 and 3 but those machines are not mine. There is an easy fix. Run a portable version of the DropBox syncer on a USB drive. But the problem is that I don't want to carry a USB drive around with me all the time. In that case, I can just run the small portable DropBox syncer off the internet. But where will it to store the files? A temporary directory on the C drive. There is only one issue left: there are hundreds of machines that I will randomly use that fit in categories 2 and 3. My portable DropBox syncer will notice that the temporary directory is empty on each new PC I use and instead of downloading my DropBox folder to the machine, it syncs the other way around i.e. it deletes my entire DropBox. The solution is to mirror my DropBox onto the temporary directory before running the DropBox syncer.

    Read the article

< Previous Page | 767 768 769 770 771 772 773 774 775 776 777 778  | Next Page >