Search Results

Search found 4248 results on 170 pages for 'adsl router'.

Page 78/170 | < Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >

  • Virtualizing an Inline network appliance with VirtualBox (or VMWare)

    - by Tzury Bar Yochay
    My device, which is a Linux based IP in-liner is transparent to the network peripherals, that is, no IP address assigned to any of its interfaces. For the sake of the conversation, let's use ADSL connection as an example, while the device is inspecting the bi-directional traffic, the network is behaving same as if device was not there, attached to the wire (see Physical setup at the attached diagram). I wonder if I can enclosed that "device" within a Windows machine and have it operated virtually so it still seats inline between the ADSL router and the Windows netwroking interface by using virtual NICs, (or whatever their name is in windows), and inspecting the traffic, same as if it was on a separate physical device, the drawing under "Virtual Setup" in the attached diagram show what I am trying to achieve. Reading a bit on the VirtualBox docs, seems like binding the right side is relatively simple, perhaps I should have one network adapter set as Bridge Networking and VirtualBox will connect it to the physical NIC on the host machine, and network packets are exchanged directly, circumventing the host operating system's network stack (WinXP in my case). However, I have no idea how to achieve the left side of my diagram, which requires adding virtual NICs to windows and configure them correctly in a way to make that pipeline possible. I would appreciate any help. by the way, if that is not possible with VirtualBox but with other virtualization solution (e.g. VMWare), I would accept the other as well.

    Read the article

  • Why can't i ping server? VMware set to 'Bridged' loses IP address on 10.04.

    - by Dave
    I have installed a fresh 10.04 server onto a laptop on a home network as a VMware machine and set network connection to 'Bridged: connect directly to the physical network' from within VMware and rebooted the server. It then loses its IP address. 'dhclient eth0' says "No working leases in persistent database - sleeping" DHCP is working fine on the wi-fi router. The laptop is wired to a wireless router and from there wirelessly to a desktop. Desktop and Laptop can ping each other from Windows. I can ping the VM from Windows on the same laptop, but not from the desktop. Strangely ping has started to resolve hostnames to IPv6 addresses and not IPv4. Don't know whether that's connected? A kick in the right direction would be greatly appreciated. I've been an Ubuntu desktkop user for a few years, but new to ubuntu servers.

    Read the article

  • How do I know if my serial adapter card is working?

    - by Ingram
    I just installed a 2 port serial adapter in my Ubuntu 10.10 system, then I tried following this tutorial that I used on my old system to connect to a cisco router (my old system had an onboard serial adapter, and the tutorial worked just fine). I can't get my system to connect to the cisco router, so I'm wondering if the card even works in Ubuntu. How can I tell if the card actually works with Ubuntu? #dmesg | grep tty [ 0.000000] console [tty0] enabled [ 0.358667] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.358994] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.359128] ttyS1: detected caps 00000700 should be 00000100 [ 0.359132] 0000:03:00.0: ttyS1 at MMIO 0xfeafd000 (irq = 16) is a 16C950/954 [ 0.359191] ttyS2: detected caps 00000700 should be 00000100 [ 0.359195] 0000:03:00.0: ttyS2 at MMIO 0xfeafd200 (irq = 16) is a 16C950/954

    Read the article

  • Why can't I ping server? VMware set to 'Bridged' loses IP address

    - by Dave
    I have installed a fresh 10.04 server onto a laptop on a home network as a VMware machine and set network connection to 'Bridged: connect directly to the physical network' from within VMware and rebooted the server. It then loses its IP address. dhclient eth0 says "No working leases in persistent database - sleeping" DHCP is working fine on the wi-fi router. The laptop is wired to a wireless router and from there wirelessly to a desktop. Desktop and Laptop can ping each other from Windows. I can ping the VM from Windows on the same laptop, but not from the desktop. Strangely ping has started to resolve hostnames to IPv6 addresses and not IPv4. Don't know whether that's connected? A kick in the right direction would be greatly appreciated. I've been an Ubuntu desktkop user for a few years, but new to ubuntu servers.

    Read the article

  • Confused about nova-network

    - by neo0
    I'm so sorry because this question doesn't related to Ubuntu. I asked in Openstack forum but this forum is not very active. So I think if someone have experience with Openstack Nova can help me with my problem. I've read some explanations about nova-network and how to configure it like this one from wiki: http://wiki.openstack.org/UnderstandingFlatNetworking I'm confusing about a detail. If every traffic from the instances must go through nova controller node, then why we still need the public interface for nova-compute node? Is it necessary? What happen when a request from outside to an instance. For example I have a controller node and a nova-compute node. In nova-compute node I run an instance with a Wordpress website. Then someone connect to the public IP of this instance. So the request go directly from router to the nova-compute node or from router to controller node then nova-compute node? Thank you!

    Read the article

  • How to change the IP address on my Ubuntu virtual NIC

    - by DextrousDave
    I have a physical windows system, on which I run Vmware Workstation. Now on VMware I run Ubuntu 12.10. I am running a webserver on Ubuntu via LAMP, inside VMware. Problem: Now my local IP address for my virtual NIC (the one Ubuntu is using) has an address of 192.168.159.7, and my home router only issues IP addresses of the range 10.0.0.x. So if I want to port forward to the virtual NIC, which has a 192.168 address, I cannot, so my LAMP webserver cannot be accessed externally since the router does not know to send the packets on port 80 to the virtual NIC... How do I fix that? The only way I guess is to assign a 10.0.0.x ip address to the virtual NIC?? But how do I do that? I tried to do it on the host Windows machine with 'Get my IP address automatically' but it issues a 192.168 address every time... Thank you

    Read the article

  • Broadcom 4313 Signal strength very low on an HP Pavilion dv4

    - by thegreyspot
    I have a HP pavilion dv4 4141US laptop running fresh ubuntu 11.10. This laptop has a broadcom 4313gn chipset for the network card. The network card is using the brcmsmac driver. Which, I heard else where on askUbuntu that its the best driver to be using for this card. I can connect to my network, however I have extremely low network signal. Right now I am right in front of the router, and I only get 72%. If i go to the room directly behind the router's wall, i get no signal, where as with windows 7 I get a nice 70% percent. UPDATE: I use WEP at home and an open wireless connection at work. Both have same result. Both are completely different routers. Also you G What can i do?

    Read the article

  • Hosting a website from a dynamic IP

    - by nick
    I recently upgraded my internet to the point that it is much faster and more reliable than my current webhost. I would like to move my current domain to be hosted at home, but my IP address is dynamic. As far as I know, I only get a new IP when I restart my modem and or router (which is almost never) or when cable one (my ISP) pushes out a firmware update (rarely). There are a few ways I can see doing this 1) convince my ISP to give me a static IP 2) assign my router my current IP to force a static IP (which might work?) 3) set my dns record to my current IP address and update it on the rare occasions that it changes. Obviously I'm hoping that the first one works, but I don't want to pay a lot of extra money (if that's what it takes) to get a static IP address. Has anyone had any luck with something like that?

    Read the article

  • pfsense 2.0 traffic priority - set full priority for single host

    - by Waxhead
    I have a network with several computers all on the same network and since I have very limited bandwidth I would like to prioritize traffic almost like a CPU scheduler prioritize processes. Example: Computer A: Used for webstuff: YouTube, downloads, news, emails etc. Computer B: Transferring files over HTTP Computer C: Transferring files over ftp, rsync whatever What I would like to do is to give A up to for example 90% of the available bandwidth IF A requires it. The leftovers (10%) is divided between B and C (5% each if both is busy) If A is not utilizing all bandwidth then of course B and C should share the full bandwidth (50% each as long as both are maxing out their bandwidth). All computers are on the same network (192.168.1.0 - 192.168.1-10 for example). Appreciate if anyone could shed some light on how I should set up my network to achieve this. To be honest I actually need a step by step guide on how I should set this up. Network setup: (ADSL modem configured in bridge mode (1500kbps/300kbps)) [ADSL modem (bridge)]<-[pfsense2.0]<-[switch]<-[Computer A,B,C...etc]

    Read the article

  • Questionable ethics regarding closed source softwares which are supposed to be open source.

    - by edem
    Several days ago I heard a sentence "Cracking company name routers are not a crime.". I asked "Why?" and the guy explained to me that company name used a linux distribution on their routers which source can not be closed because of their license but company name closed it. What do you think about this? Doing otherwise unethical "cracking" becomes ethical, or somewhat neutral if the software in question is "cracked" too? By "cracking" I don't mean breaking into a computer through someones' company name router but "cracking" my own router's OS which otherwise would be unethical.

    Read the article

  • bridge network using route

    - by wannabe
    I have been googeling and searching on how to do bridge my wifi connections to my internet connection using route. I have a ubuntu server 12.04 with a wifi and normal network card I also have a router that is connected to the internet on my ubuntu server i have eth0 connected to the router; IP 192.168.1.12 GW 192.168.1.1 DNS 212.54.40.25 this all works great I have set up my wlan0 as my accespoint, and DHCP to feed an IP to any device that connects to it. if i connect, for example, my android smartphone to my wlan0 acces point it will get the following IP 10.10.0.2 GW 10.10.0.1 DNS 212.54.40.25 How in earth can I bridge this connection and acces the internet from my android? I dont want to make use of BR0 bridge-utils but accomplish this using route. Many thanks in advance

    Read the article

  • access to site owner not working

    - by Daveo
    I made a website it works for everyone except for the site owner, who cannot access the site. He gets a server could not be found error. I went to his house and the issue occurs for all of his devices (PC, laptop, iPhone using WiFi) when I turn WiFi off the iPhone it works. So I thought it was a problem on his router so I reset is router to default factory settings but it still does not work, I have flushed his DNS cache and his browser cache. But nothing seems to help. He cannot even PING the server using the domain name. However when he uses the IP address he can see the site fine. I looked in cpanel for an blocked IP addresses but cannot see anything. What could be stopping just him from accessing the site via domainname and not the IP address? Site details are: PHP, osCommerce it is hosted by site5 on my reseller account.

    Read the article

  • WiFi, No ping, other works fine

    - by Linux Mom
    I installed Ubuntu 12.04 LTS for my mom, this runs OK. However recently, I switched back and forth between encryptions on our WiFi Router from WPA-PSK to WEP and back again to WPA-PSK, same password. Now this old laptop won't even ping the gateway on the router, although the nm-applet shows connected. I tried re-adding the network and putting in the BSSID. I did this over again sometimes just to verify. I tried with my 3G Tethering on my phone, it works fine, can go online too. My other Linux laptop can go on the same wifi as well as my phone. And this laptop used to been online on the same network, same password, same encryption (WPA-PSK) What can be wrong ? Does it need a serious kick in the butt or removing some cached authorisation somewhere?

    Read the article

  • Internet connection crashes while wifi / lan stay connected

    - by pirad
    I am connected to a router by wifi or lan. But every few moments (sometimes seconds, sometimes half an hour) my connection to the internet breaks down. So in one moment I can surf with my firefox and have ping times of 20 ms (wifi) to the google server. And in the next moment I can't open any pages in any browser and the ping shows no new messages first and then "Destination Host Unreachable". This is especially odd as another computer or my smart phone stays connected at the same time to the same network and seems to notice nothing. So I have a problem independend of wifi or lan drivers but with something else. Where should I look for logs that could tell me more information? I can't find some in syslog. Just if I reconnect to the router (wich works for another few moments) there are a lot of informations. But everythin is okay then.

    Read the article

  • Wifi very slow on Ubuntu 12.04 but not on Win7, need help

    - by user84504
    I have an enormous problem: I've a Sony Vaio VGN-NR21S with win7 and Ubuntu 12.04 in dual boot. With Windows everything is fine (except that is windows) but with Ubuntu the wireless connection is awfully slow, basically unusable. I've already search for similar discussion but the solution proposed didn't worked. I've noticed this issue also in live mode both with ubuntu and linux mint. I've installed Ubuntu onto an Acer that shows the same problem when connected via wifi to my router, so I think that maybe the issue is about compatibility with my home router. I really need help, I don't want unistall ubuntu! Please tell me which output u need to help me, thanks.

    Read the article

  • How can I reconnect to a ssh session after a broken pipe?

    - by Chauncellor
    So I was running apt-get upgrade on a server when the router decided it had been too long since it last made me angry: It dropped all connection. Moral of the story is to use screen a lot when you're on a bum router. Anyway, I logged back in and found in htop that the process was still hanging there, still waiting for my Y/n to upgrade (hadn't hit it yet, luckily). Is there any way I can reattach to a session that had been broken off? I ended up just killing it since it wasn't in the middle of package management but it would be great to know for future reference.

    Read the article

  • Internet (HTTP) is not working on Sony Viao

    - by vijay
    I switched my sony viao laptop from XP to ubuntu 10.04 recently. I have it connected through router at home. The internet was working fine with XP. With ubuntu, i am not able to connect to interenet. I am able to update using apt, and i am able to ping too. It seems like there is a DNS issue, when i try to goto sites from firefox, it doesn't work. I tried disabling the ipv6 in firefox config, it doesn't work. My router is on 192.168.2.1 instead of 192.168.1.1 any ideas on what config i might need to change to make this work? or could this be a drive issue?

    Read the article

  • How do I secure a Tomcat installation?

    - by spangeman
    I have installed tomcat on my Ubuntu Home 11.10 system and can successfully access the test page online after port forwarding on 8080 within my router. I have not made any other changes to the router, Ubuntu or the tomcat install, everything else has remained standard. I intend on using this to play around with Java Servlets and basic web development for my own personal use. What steps, if any, would you suggest I take to ensure this is secure? Should I change anything within the Tomcat configuration? This seemed like a good idea to limit access - http://www.seankilleen.com/2010/09/how-to-allow-only-specific-ip-addresses_30.html But I am open to any other recommendations.

    Read the article

  • How to debug wifi connection?

    - by mmb
    I am using Ubuntu's Network Manager to connect to a local wifi router. My problem is, that it often disconnects without any visible reason (router is on, internet connection seems to be working, wifi diodes are blinking). I mostly have to disable wifi from Network Manager, enable it again to get wifi connecting again. Plus I am often experiencing Network Manager trying to connect to my wifi, trying several times but then giving up. I even tried an external usb-wifi card, but with the very same results. My question is: How can I debug this? Which logs should I read to see what is really happening when all of these errors occur - so I can post them here and see how to proceed?

    Read the article

  • Wi-Fi not working only on Ubuntu computer?

    - by Joseph_carp
    The Wi-Fi at our house does not work on my Asus notebook running Ubuntu 12.04. It works fine on all other devices except this one. Internet worked fine before I had Ubuntu and I had Windows 7, but we also had a different ISP and place. My roommate's Windows 7 notebook and netbook both work fine with the internet and so do all of our phones and iPods. I do not know what is wrong because it works fine EVERYWHERE else, but when I am connected to my own router at my house it is either EXTREMELY slow or it just loads and loads and loads. I have all of the correct drivers and all that so why is it just this one connection that is a problem. I do not know if this matters but the ISP is Comcast and so is the Modem/wireless-router. Any help is much appreciated, thank you.

    Read the article

  • My ethernet connection is not working but it is detected by my computer

    - by smithy545
    I'm setting up an old computer with ubuntu server 12.04. I wiped the drive and went through the installation fine but afterwards the ethernet would not work. It's physically connected to the router and the card is recognized by lspci(SiS 900) but it won't connect at all. I've plugged in and installed the drivers for a wifi adapter and it's worked with the same router. Just so you know I've turned it on and off plenty of times. Any help would be appreciated.

    Read the article

  • Ubuntu 12.04 wifi problem

    - by Akaash
    I'm having trouble with wifi on my MSI U180 netbook using Ubuntu 12.04. When I boot up the netbook, it will connect to my router however after a few minutes the wifi will just stop working and not find or connect to any networks. The only way to get wifi connectivity back is to reboot the netbook however the connection will again only last a few minutes. A wired connection works fine. I have tried connecting to a different router and the same thing happens. My friend has the same OS and netbook and his works fine. Does anybody have any possible solutions? Thanks in advance.

    Read the article

  • Windows 7 intermittently drops wired internet/lan connection.

    - by CraigTP
    In a nutshell, my Windows 7 Ultimate PC intermittently drops it's internet connection. Why? Background: My PC is wired to my ADSL modem/router which is directly connected to the phone line. I also have wireless connectivity turned on within the router for a laptop to connect wirelessly. Every few hours or so, when using my PC, I find I cannot access the internet and pages will not load. Eventually, Windows7 will update the network icon in the task-tray to show the exclamation mark symbol on the network icon. Opening up the Network And Sharing Centre will show the red cross between the "Multiple Networks" and "The Internet". Here's a picture of the "Network And Sharing Centre" (grabbed when everything was working!) As you can see, I'm running Sun's VirtualBox on this machine and that creates a Network connection for itself. This doesn't seem to affect the intermittent dropping (i.e. the intermittent drops occur whether the VirtualBox connection is in use or not). When the connection does drop, I cannot access any internet pages, nor can I access the router's web admin page at http://192.168.1.1/, so I'm assuming I've lost all local LAN access too. It's definitely not the router (or the internet connection itself) as my laptop, using the wireless connection (and running Vista Home Premium) continues to be able to access the internet (and the router's web admin pages) just fine. Every time this happens, I can immediately restore all internet and LAN access by opening Network Adapter page, disabling the "Local Area Connection" and then re-enabling it. Give it a few seconds and everything is fine again. I assume this is because, beneath the GUI, it's effectively doing an "ipconfig /release" then "ipconfig /renew". Why does this happen in the first place, though? I've googled for this and seen quite a few other people (even on MSDN/Technet forums) experiencing the same or almost the same problem, but with no clear resolution. Suggestions of turning off IPv6 on the LAN adapter, and ensuring there's no power management "sleeping" the network adapter have been tried but do not cure the problem. There does not seem to be any particular sequence of events that cause it to happen either. I've had it go twice in 20 minutes when just randomly browsing the web with no other traffic, and I've also had it go once then not go again for 2-3 hours with the same sort of usage. Can anyone tell me why this is happening and how to make it stop? EDIT: Additional information based upon the answer provided so far: Firstly, I forgot the mention that this is Windows 7 64 bit if that makes any difference at all. I mentioned that I don't think the VirtualBox network adpater is causing this problem in any way, and I also have VirtualBox installed on two other machines, one running Vista Home Premium and the other running XP. Neither of these machine experience the same network connectivity issues as the Windows 7 machine. The IP assignment for the Windows 7 machine is the same both before and after the "drop". I have a DHCP server on the router issuing IP Addresses, however my Windows 7 machine uses a static address. Here's the output from "ipconfig": Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Within the system's event logs, the only event that relates to the connection dropping is a "DNS Client Event" and this is generated after the connection has dropped and is an event detailing that DNS information can't be found for whatever website I may be trying to access, just as the connection drops: Log Name: System Source: Microsoft-Windows-DNS-Client Event ID: 1014 Task Category: None Level: Warning Keywords: User: NETWORK SERVICE Description: Name resolution for the name weather.service.msn.com timed out after none of the configured DNS servers responded. The network adapter chipset is Realtek PCIe GBE Family Controller and I have confirmed that this is the correct chipset for the motherboard (Asus M4A77TD PRO), and in fact, Windows Update installed an updated driver for this on 12/Jan/2009. The details of the update say that it's a Realtek software update from December 2009. Incidentally, I was still having the same intermittent problems prior to this update. It seems to have made no difference at all. EDIT 2 (1 Feb 2010): In my quest to solve this problem, I have discovered some more interesting information. On another forum, someone suggested that I should try running Windows in "Safe Mode With Networking" and see if the problem continues to occur. This was a fantastic suggestion and I don't know why I didn't think of it sooner myself. So, I proceeded to run in Safe Mode with Networking for a number of hours, and amazingly, the "drops" didn't occur once. It was a positive discovery, however, due to the intermittent nature of the original problem, I wasn't completely convinced that the problem was cured. One thing I did note is that the fan on my GFX card was running alot louder than normal. This is due to the fact that I have an ASUS ENGTS250 graphics card (http://www.asus.com/product.aspx?P_ID=B6imcoax3MRY42f3) which had a known problem with a noisy fan until a BIOS update fixed the issue. (See the "Manufacturer Response" here: http://www.newegg.com/Product/Product.aspx?Item=N82E16814121334 for details). Well, running in safe mode had the fan running (incorrectly) at full speed (as it did before the BIOS update), but with an (apparently) stable network connection. Obviously some driver was not loaded for the GFX card when in Safe Mode so this got me thinking about the GFX card (since the very noisy fan was quite obvious when running in Safe Mode). I rebooted into normal mode, and found that Nvidia had a very up-to-date new driver for my GFX card (only about 1 week old), so I downloaded the appropriate driver and installed it. After installation and a reboot, I was able to use my PC for an entire day with NO NETWORK DROPS!!! This was on Saturday. However, on the Sunday, I also had my PC for pretty much the entire day and experienced 2 network drops. No other changes have been made to my PC in this time. So, the story seems to be that updating my graphics card drivers seems to have improved (if not completely fixed) the issue, however, I'm still searching for a proper fix for this problem. Hopefully, this information may help anyone who may have additional ideas as to why this problem is occuring in the first place. (And why does new GFX card drivers have anything to do with the network?) I appreciate everyone's feedback so far. However, I'll have to ask once more if anyone has any further ideas of how to fix this particular problem? Thanks in advance.

    Read the article

  • Can I subnet a subnet?

    - by Portman
    Apologies in advance for the botched terminology. I have read the Server Fault Subnet Wiki but this is more of an ISP question. I currently have a /27 block of public IPs. I use give my router the first address in this pool and then use 1-to-1 NAT for all the servers behind the firewall, so that they each get their own public IP. The router/firewall is currently using (actual addresses removed to protect the guilty): IP Address: XXX.XXX.XXX.164 Subnet mask: 255.255.255.224 Gateway: XXX.XXX.XXX.161 What I would like to do is break out my subnet into two separate /28 subnets. And do this in a way that is transparent to the ISP (i.e., they see me as continuing to operate a single /27). Currently, my topology looks like: ISP | [Router/Firewall] | [Managed Ethernet Switch] / \ \ [Server1] [Server2] [Server3] (etc) Instead, I would like it to look like: ISP | [Switch] / \ [Router1] [Router2] | | | | [S1] [S2] [S3] [S4] (etc) As you can see, this would partition me into two separate networks. I'm struggling with what the correct IP settings would be on Router1 and Router2. Here's what I have right now: Router1 Router2 IP Address: XXX.XXX.XXX.164 XXX.XXX.XXX.180 Subnet mask: 255.255.255.240 255.255.255.240 Gateway: XXX.XXX.XXX.161 XXX.XXX.XXX.161 Note that normally you would expect Router2 to have a gateway of .177, but I'm trying to get them both to use the gateway originally given to me by the ISP. Is subnetting like this in fact possible, or am I completely botching the most basic concepts?

    Read the article

< Previous Page | 74 75 76 77 78 79 80 81 82 83 84 85  | Next Page >