Search Results

Search found 4248 results on 170 pages for 'adsl router'.

Page 81/170 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

  • DHCP Relay setup in ubuntu server

    - by jerichorivera
    I have a network appliance (QNO) that works as traffic load balancer and dhcp server. I would like to add a linux server in between the network appliance and the client computers. The linux server will be used to monitor bandwidth usage. My problem is I still want DHCP to be served by the network appliance so that load balancing will still work efficiently. We are afraid that if we setup the linux server as the DHCP server the network appliance will not be able to load balance the traffic if it only sees the linux server as a single client connecting to it. I've been searching all over for a tutorial on how to setup DHCP relay but have not found any. How do I setup DHCP relay on my linux server given there are two NICs attached to it, one connects the linux server to the network appliance and the other connects the linux server to the client computers. EDIT Router (DHCP) ---- [eth0] Linux Server (Relay agent) [eth1] ----- PC (network) Router IP is 192.168.0.100 eth0 is on DHCP eth1 is static 192.168.2.11 (if I need to change this I can) Tried to do dhcrelay -i eth1 192.168.0.100, but the PC was not getting any DHCP lease from the DHCP router. I might be missing something here.

    Read the article

  • Wake on Lan Remote not waking PC while the PC does receive the packet.

    - by Nycrea
    Over the last couple of weeks, I have been trying to set up WOL from a remote location. When I use my laptop to wake the machine locally, it works just fine. (for some reason, when I try to wake from my phone with an app called "WOL wake on lan" it does not work locally either, but I'll get to that later) Anyway, when the machine is turned on, and I let it 'listen' for incoming magic packets (with a program called "WOL magic packet sender") on my specified port, it does receive them, though when turned off, the machine does not wake. When sending from phone, either locally or via 3G remotely, it does receive but does not wake as well. Because the machine does receive them when turned on and listening, but does not wake when turned off, I am convinced the cause of the problem is my receiving PC, rather than the router or the sender. Some extra info: The receiving machine is a PC running Windows 7 64bit. My router is the Netgear JWNR2000v2. I have the port I use forwarded to my PC's static IP in the router. If anyone could help, or just share your own story with the same problem, maybe we can work this out. Thanks a lot in advance.

    Read the article

  • Blocking of certain file downloads

    - by Philip Fourie
    I have a problem where I cannot completely download a certain file from a server. The file is 1.9MB in size but only 68% is downloaded and then it hangs. I tried and these cases, which failed: Downloaded the file with HTTP Downloaded the file with FTP Moved the file to different FTP and web servers behind the ISA firewall Tried with IIS 6.0 & IIS 7.0 Multiple download clients. Which included FireFox, FileZilla (on Windows) and wget (on Linux) This worked: Downloading other files from the same location on the server. Both bigger and smaller and in size than the original. FTP and HTTP worked. Earlier version of this file (.DLL) works. It is as if the content of this file has an influence on this file being served. Network architecture: Client Machine - Internet (ISP) - ISA Server - IIS 7.0 The only constants are the ISP, Cisco router and the ISA server. Is it possible that something is rejecting the download because of the contents of the file? I am hoping ISA is the culprit... I am not a ISA expert is there somewhere I can look to establish if it is indeed ISA causing this? Update: Splitting the file into two parts with a hex editor results in one half of the file being served correctly and the other part not. Zipping the file results in the file being downloaded successfully. However this is not an option for this particular scenario. Renaming the file and its extension also doesn't work. Update 2009/10/22: It does NOT seems to be ISA that is causing this problem. We connected a laptop (running IIS) on an available public IP and still the file download to 68% before it hanged. The two remaining components are the ISP and the Cisco 800 series router. Anyone knows about an issue on the router perhaps?

    Read the article

  • Vmware Workstation, Win7 host, Ubuntu guests with Nat + Host-only networks but they cannot connect to the Internet

    - by Ikon
    I have a Win7 host machine with Vmware Workstation. In the workstation I have 3 Ubuntu installed. All 3 Ubuntu guests have a Nat network - to access the internet without asking the router for a local address - and a Host-only network - to connect all Ubuntu quests and the host in a private network for internal communication, without touching the router. When I try to make any of the Ubuntu quests to get data from the internet - assuming that they would figure out that the Nat-ed interface can access the requested data - they fail and report that there is no route to my query. If I disconnect the 2nd interface on the Ubuntu guests with the Host-only network and restart networking, they start to know the route to the internet. Odd, during the installation of the guests they asked which of the 2 given interfaces - with Nat and Host-only config - should be used to get updates during installation and they oddly managed to get the updates. Not so after the installation has finished and rebooted. I have checked the Virtual Network Editor that the Nat interface should use my real network card to access the net, so there should be no problem. I wish not to use the router's dhcp service to give the Ubuntu quests an address, and also I don't want the guests to be accessable from the local network directly, but only by the host - that's the Host-only network is for. Any suggestions? Edit: 192.168.189.0 is the Nat interface and 192.168.7.0 is the Host-only. $ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.7.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 192.168.189.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.189.2 0.0.0.0 UG 100 0 0 eth0

    Read the article

  • How to set a static route for an external IP address

    - by HorusKol
    Further to my earlier question about bridging different subnets - I now need to route requests for one particular IP address differently to all other traffic. I have the following routing in my iptables on our router: # Allow established connections, and those !not! coming from the public interface # eth0 = public interface # eth1 = private interface #1 (10.1.1.0/24) # eth2 = private interface #2 (129.2.2.0/25) iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -m state --state NEW ! -i eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth0 -o eth2 -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow outgoing connections from the private interfaces iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -A FORWARD -i eth2 -o eth0 -j ACCEPT # Allow the two private connections to talk to each other iptables -A FORWARD -i eth1 -o eth2 -j ACCEPT iptables -A FORWARD -i eth2 -o eth1 -j ACCEPT # Masquerade (NAT) iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # Don't forward any other traffic from the public to the private iptables -A FORWARD -i eth0 -o eth1 -j REJECT iptables -A FORWARD -i eth0 -o eth2 -j REJECT This configuration means that users will be forwarded through a modem/router with a public address - this is all well and good for most purposes, and in the main it doesn't matter that all computers are hidden behind the one public IP. However, some users need to be able to access a proxy at 192.111.222.111:8080 - and the proxy needs to identify this traffic as coming through a gateway at 129.2.2.126 - it won't respond otherwise. I tried adding a static route on our local gateway with: route add -host 192.111.222.111 gw 129.2.2.126 dev eth2 I can successfully ping 192.111.222.111 from the router. When I trace the route, it lists the 129.2.2.126 gateway, but I just get * on each of the following hops (I think this makes sense since this is just a web-proxy and requires authentication). When I try to ping this address from a host on the 129.2.2.0/25 network it fails. Should I do this in the iptables chain instead? How would I configure this routing?

    Read the article

  • .htaccess with godaddy not working in subdomain

    - by explorex
    Hi, i have a site uploaded to shared subdomain (which is inside a folder). and htaccess is not working. please get details from here. EDIT::copied from stack overflow Hi, i uploaded as website to a subdomain, and every page is not working except the front page please check it here. what could be the possible reason? i shoud have 8 pages in front level and many more on admin level but i am getting 404 error as you can see, does anyone has idea or suggestion? UPDATE:: .htaccess file RewriteEngine On RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ index.php [NC,L] UPDATE to url rounting i do have few url router like below BUT i dont have any default router $router->addRoute( 'get-destination', new Zend_Controller_Router_Route('destination/get/:id/:dest-name', array( 'controller' => 'destination', 'action' => 'get', 'id' => 'id', 'dest-name' => 'dest-name' )) ); just to make look cooler and on my navigation (which is loaded from xml i have) something like <nav> <home> <label>HOME</label> <controller>index</controller> <action>index</action> <route>default</route> </home> since i was getting url problem from where url was routed and please check phpinfo at http://websmartus.com/demo/globaltours/public_html/phpinfo.php

    Read the article

  • Port(s) not forwarding?

    - by user11189
    I have cable internet service through Charter Communications and feed two desktop computers through a Linksys RP614v3 router. One system is my wife's running WinXP Home Edition and the other is mine, running Vista Home Premium (sp1). I have port forwarding configured in the Linksys so I can access the Vista system remotely using TightVNC. Initially, it worked great and I was able to remotely tend email and access local files while out of town for work. Lately, the cable internet service appears to flicker intermittently and upon return, my Mailwasher program loses ability to access the net and I've been unable to make the remote connection. When I reset the port forwarded for email in the router control panel, Mailwasher functionality returns but as I'm home when that happens, I have no easy way to check remote access until the next time I'm on the road or at work. I'm at my wit's end -- the TightVNC client accesses fine from my wife's system from behind the modem/router setup but I don't know how to maintain whatever gets reset when I fiddle with the control panel and the need to do so at all is new. I accessed it fine for a week off and on while out of town a month ago and now I can't leave home and access it from work an hour later.

    Read the article

  • VMware Workstation Bridged Network Host UnReachable

    - by user2097818
    VMware Workstation 7 on Win7-64 (Home Premium). I have confirmed this on any guest running on this machine (from winxp to debian). I am using a bridged network connection for my guests (Automatic on VMnet0). All of the network configuration is done with DHCP (including on the host). Problem What I can not do: Ping my host machine from inside any VM. (either shows me "Destination Host Unreachable" or will just timeout) What I CAN do right after power up, with no problems at all. I can connect to the internet from inside the VM I can ping my router from inside the VM I can ping other machines on my network from inside the VM Other machines can ping the VM Other machines can ping the host My host machine can ping the VM (this one is important. read further) Details So I have my router assigned as 192.168.2.1/255.255.255.0, and the router provides the DHCP service (and it seems to be doing so successfully). There are no IP conflicts on the network that I am aware of. All Gateways and Subnet masks are appropriate and matching. My entire workshop is on one single subnet, with one single DHCP server and gateway. There is one method in which I can ping successfully, but it requires an active connection initiated from the host (I start pinging from host to VM). During the period of the active connection, I can successfully ping from VM to host, using explicit IP address. As soon as the host connection is closed, the VM ping starts hanging with the same old messages. My Thoughts This really feels like a firewall problem, but I have turned off all firewalls on host and VM, powered down the network, powered back up, and the problem still persists. And if it was firewall, why would only the IP address associated with bridged VM networks be blocked. I feel as though my host operating system (Win7) is somehow configured incorrectly, or, VMware Workstation is configured incorrectly from the host side. Although I have done my best to put everything in default, I feel like I am missing something silly.

    Read the article

  • Windows-7 Ultimate 64 bit wont connect to my wired/wireless networks.

    - by A302
    Windows 7 Ultimate 64 bit. Everything was working fine & then just stopped working. The nic card Realtek PCIe GBE Family Controller is enabled but does not connect to my router (cables & router ports are good). Wireless Atheros AR5007EG is enabled but the connection is limited (encryption type / key have been verified). A laptop running XP can connect both wired / wireless. SSID is not being broadcast, connect to network if it is not broadcasting is checked. Have checked services.msc for Bonjour & did not see it listed. Network & sharing center does not list any active networks. Device manager lists both devices as functioning properly. Router configuration has not been changed. Virus scan has not found anything. I would like to fix this rather than using Acronis to do a system restore. Thanks in advance for any advice offered in solving this. 26 Jan, the nic card & wireless are working using PCLinux OS Live CD. It appears that the problem is Windows 7 related.

    Read the article

  • SBS 2008 - DNS Forwarders timing out.

    - by Moif Murphy
    Hello, We have an SBS 2008 server that keeps losing connection to the internet approx 2-3 times a day. It's a simple setup, BT Business Broadband ADSL to a Wireless Zyxel router to the server. Clients connect via WiFi from their laptops. Plugging ethernet in makes no difference, only a reboot of the router seems to bring everything back again. I'm looking at the forwarders on the DNS properties page and they're timing out when trying to resolve the IPs. Currently there are two IPs in there, 194.72.9.34 which has timed out and 194.72.9.38 which has finally resolved to ns8.bt.net We've been in there and replaced all media, installed a PCI NIC, have changed the router three times. There are no errors in the DNS event logs pertaining to what's going on. We've also been on to BT who are adamant that it's not their end. Could someone shed some light on what could be going on or where else to look in the configuration of the server? Thank you.

    Read the article

  • Cant ping ip on LAN. Port forward works fine though.

    - by Anoop
    I have a Solaris 11 machine running inside the LAN. It is a default install. I can access the machine and ping it if I ssh into my router (if it matters, it is running dd-wrt). I cannot ping the Solaris machine using ip address from any other machine inside the LAN. But if I setup port forwarding everything works perfectly fine. I can also use the port forward from outside the LAN (from my office) - which is good and how I want it to be. I can SSH and ping and do pretty much everything else from outside as well as inside but only as long as I have the port forwarded from my router. Why would I not be able to ping or ssh or even access the Solaris 11 machine from within the LAN - I have checked and couldn't find any firewall running on the Solaris 11 box. I even tried disabling every known firewall on the router (dd-wrt, it had something like SPI firewall running). I even tried setting a static IP for my Solaris box but all in vain! Please help me understand how and why this happens!! Thanks.

    Read the article

  • Servers - Buying New vs Buying Second-hand

    - by Django Reinhardt
    We're currently in the process of adding additional servers to our website. We have a pretty simple topology planned: A Firewall/Router Server infront of a Web Application Server and Database Server. Here's a simple (and technically incorrect) diagram that I used in a previous question to illustrate what I mean: We're now wondering about the specs of our two new machines (the Web App and Firewall servers) and whether we can get away with buying a couple of old servers. (Note: Both machines will be running Windows Server 2008 R2.) We're not too concerned about our Firewall/Router server as we're pretty sure it won't be taxed too heavily, but we are interested in our Web App server. I realise that answering this type of question is really difficult without a ton of specifics on users, bandwidth, concurrent sessions, etc, etc., so I just want to focus on the general wisdom on buying old versus new. I had originally specced a new Dell PowerEdge R300 (1U Rack) for our company. In short, because we're going to be caching as much data as possible, I focussed on Processor Speed and Memory: Quad-Core Intel Xeon X3323 2.5Ghz (2x3M Cache) 1333Mhz FSB 16GB DDR2 667Mhz But when I was looking for a cheap second-hand machine for our Firewall/Router, I came across several machines that made our engineer ask a very reasonable question: If we stuck a boat load of RAM in this thing, wouldn't it do for the Web App Server and save us a ton of money in the process? For example, what about a second-hand machine with the following specs: 2x Dual-Core AMD Opteron 2218 2.6Ghz (2MB Cache) 1000Mhz HT 16GB DDR2 667Mhz Would it really be comparable with the more expensive (new) server above? Our engineer postulated that the reason companies upgrade their servers to newer processors is often because they want to reduce their power costs, and that a 2.6Ghz processor was still a 2.6Ghz processor, no matter when it was made. Benchmarks on various sites don't really support this theory, but I was wondering what server admin thought. Thanks for any advice.

    Read the article

  • LAN Webserver not accessible through PPTP VPN

    - by Joe
    I have this LAN Network with 10 clients and one server. The server has 4 virtual machines and a BIND DNS Server. When the router assigns an IP through the DHCP , it also gives the ip of the DNS Server, to resolve internal domains. Everything apparently works fine, the clients being able to access the server's vm's resources, but I also have to create the possibility of remote access. I installed the PPTP VPN on the server, and the vpn clients would get the same ip address range as the router's dhcp is assigning. Apparently everything is fine here also, except the fact that when we connect through the vpn , we cannot access the webserver on port 80 ( the webserver being one of the server's VM ). The iptables on the webserver has been turned off for testing purposes and the router's firewall is directing all the external traffic to the server. Can somebody suggest a solution to this? Extra details : VPN Server : PPTP Server Centos 6.3 x64 VPN Client : Windows 7 default PPTP VPN Connection The client is successfully connected to the server, everything works ( FTP/MYSQL/SSH/DNS ) , except the fact that when I try to access the webserver IP on the browser, it won't work.Pinging it works perfectly.

    Read the article

  • Problem with connecting two different networks

    - by tanascius
    I have two networks: 192.168.13.0/24 (blue) and 192.168.15.0/24 (green). Computer A is connected to the 13-net, only. Computer B has two interfaces, one in each network. There is third computer that acts like a router and connects the 13-net to the 15-net (only in this direction). Now, I'd like to ping 192.168.15.100 from computer A to B. Unfortunately there is never a reply. But when I use a hub instead of a switch it works. In my opinion the ping packet travels through the switch to the router (which is the default route/gateway for A). The router sends the packet back to the switch to B. Probably B receives it on its 15-net interface but answers with it's 15th interface? Is this possible? The problem is, that B may have only a gateway 192.168.13.50 - but I am not really sure of it (B is a embedded system with limited configuration possibilities). Can anyone explain what happens here? Thank you!

    Read the article

  • Strange WiFi problem - network is "not connected" but works

    - by GalacticCowboy
    Background I'm using a Windows XP tablet PC connected to my home network. I do broadcast the SSID, but otherwise the wireless network is locked down as tight as I can make it - WPA2 with a strong key, MAC filtering, etc. I've had this computer for about 4 years and the router for about 6 months. Before that, the previous router was set up in the same way, and I've never had any particular problems. Problem This morning - as I type this, as a matter of fact - Windows is reporting that none of my network connections are connected. Yet somehow my Internet connectivity still works! ipconfig reports a valid IP address, domain, etc., even though Windows apparently doesn't know about it. I tried repairing the connection and it had no effect - the repair eventually timed out. I'm pretty sure that I could reboot the computer and/or the router, etc. and it would fix the problem. However, I'm more interested in knowing if any of you have ever seen anything like this, and what might have caused it? Since it works I'm not inclined to mess with it too much. My concern is that it's a precursor to bigger problems.

    Read the article

  • Wifi antenna extension with F-connector/RG-6(RG-59) cable?

    - by rjz2000
    In an older house, the wire mesh in walls surrounding the furnace behave like a Faraday cage and block wifi signals. It is also difficult to lay new cable, however there is television cable to multiple locations due to there once having been a roof-installed, television antenna. It would be relatively trivial to install the wifi router at the center distribution point, then have the antenna broadcasting/receiving the signal plugged in at each of the old television outlets. I assume that it would not be too difficult to find an adapter for SMA <- F-type connectors. The cable is actually RG-59 rather than RG-6, but I assume that it still has relatively good RF isolation along its length, which is no more than a couple hundred feet in any direction. Does anyone know a problem with the idea? Will a router get confused if there is /too little/ interference between the two antenna? Is that length of cable (~100ft) too long for the signal a router broadcasts? I have seen that it is also possible to use old ~$30/each FiOS cable modems available on eBay to extend a network over television cable. However, that seems like a less elegant solution, and might interfere with upnp and dlna services I'd like to have work on a single network. Thanks if anyone has answers or suggestions before I try this project!

    Read the article

  • Need to set up a proxy on Linksys E3200 to filter home internet

    - by Justin Amberson
    the fact that I have a Linksys E3200 may not be important. I can configure the router through the web interface, but I don't know the things I will be toggling are called. I already do simple port forwarding to access applications on my Mac remotely. So router admin is not something I technically need explained. I'm looking to running a proxy on my home computer, that filters all HTTP traffic that goes through my router. So if my daughter is on her iPad and accesses Safari, my Mac will be the judge of the validity of the request. I need something like NetNanny I guess, but local. Actually, anything that can just filter all port 80 traffic that runs locally, but maybe validates with a password? I truly truly hope this question falls within the bounds of Serverfault. I'm not a total internet newb but I'm at a loss for what to Google. If possible answer this question: Is there a webapp that can listen on port 80, and validate requests to port 80 with a password? If so, can I forward all traffic on port 80 to my Mac, to be re-routed to the user? Is this the same as a VPN? Thank you for your help. Justin

    Read the article

  • Remotely port forward/launch process or a client-less remote desktop app?

    - by DC177E
    I have an XP box running Logmein at a remote location behind a linksys router, which was running well for a whole of four days, until we had a power failure. Our ISP gave us a new IP, the machine restarted, and logmein did not autorun (or, at least, it did not automatically sign in), and our service (which may or may not be a Minecraft server with non-backed-up save files) also did not run upon startup. Logmein does not register the new IP (it still displays the old one). I have a DDNS updater service, so I do know the new dynamic address. I have tried using the built in XP remote desktop service, but, as with almost all non-cloud-based remote desktop services, it requires a port forward. Thus, I would appreciate it if anyone has any ideas as to: A: Any way of accessing our router remotely to forward the remote desktop port. I've seen the Remote Management option (forwarding the setup page to port 8080), but I do not have it enabled. I've tried UPnP, but again, the setup page for our router is not forwarded. B: Any way of remotely launching a process that does not require port forwarding (or uses ports 255XX, 18XXX, or 9000.), such as a remote console service built into XP. I realize this is a near impossibility. C: A Way to remotely start logmein, and sign in, which is likely a definite impossibility. Sorry if this is too specific for Stackexchange, or if I've put it into the wrong section (is SuperUser the correct place for this?). Ideas would, again be much appreciated, as shot-in-the-dark-like this may be.

    Read the article

  • Static DHCP binding

    - by Alex
    Good time of day, SF people. I have created a manual DHCP binding entry on a Cisco router so that a client would always get leased to it. The clients wants to get the same address on both of his dual-boot linux systems. He tries to get an IP address leased and he succeeds on one of the dual-boot operating systems. When he reboots to another one he gets a lease for a completely different one. I don't get it. The MAC addresses are the same (we checked in ifconfig, so what could be happening here? Why is the router confused? Or is it something else? Also, how can I check DHCP server IP address who I have got an IP address from (on Linux)? Configuration on Cisco: ip dhcp pool MANUAL_BINDING0001 host 192.168.0.64 255.255.255.0 hardware-address dead.beef.1337 dns-server 192.168.8.11 default-router 192.168.0.254 domain-name verynicedomainigothere.cn PS. Is it mandatory to use client-name configuration line?

    Read the article

  • Why would my network slow down?

    - by monkthemighty
    The network at my work has about 40 computers on it and a quite a few printers. When there are a lot of people working the network will be slow. I can test the ping between my computer and the router and it will keep rising, sometimes to the point that it times out. The router we are using is running Ubuntu on a atom processor and it has 4gb of ram. When the network slows the process Ksoftirq will be using most if not all of the processing power. I have found that Ksoftirq is a process that handles irq requests. Also when the network slows down I have captured packets from the router and using tshark and looked at it using wireshark on my laptop. With the capture show a lot of packets with TCP Dup ACK and TCP Retransmissions. The destinations of the TCP Dup and TCP retransmissions are to most of the computers on the network but there are some that are far more than others. What could this problem be caused by?

    Read the article

  • Windows-7 Ultimate 64 bit wont connect to my wired/wireless networks

    - by A302
    Windows 7 Ultimate 64 bit. Everything was working fine & then just stopped working. The nic card Realtek PCIe GBE Family Controller is enabled but does not connect to my router (cables & router ports are good). Wireless Atheros AR5007EG is enabled but the connection is limited (encryption type / key have been verified). A laptop running XP can connect both wired / wireless. SSID is not being broadcast, connect to network if it is not broadcasting is checked. Have checked services.msc for Bonjour & did not see it listed. Network & sharing center does not list any active networks. Device manager lists both devices as functioning properly. Router configuration has not been changed. Virus scan has not found anything. I would like to fix this rather than using Acronis to do a system restore. Thanks in advance for any advice offered in solving this. 26 Jan, the nic card & wireless are working using PCLinux OS Live CD. It appears that the problem is Windows 7 related.

    Read the article

  • Other than UDP Broadcast or Multicast, what other methods can I use on a WiFI network to discover co

    - by Gubatron
    I've implemented a simple ping/pong protocol to discover other computers connected to the same WiFI router. This works fine on many routers, but it seems some public routers have UDP traffic blocked or disabled. What other options do I have to discover the computers connected to the router? I was thinking of brute forcing TCP attempts (trying to open connections to all possible IPs on my subnetwork) but this would be very costly and I would have to cycle several times and still not find every machine that's recently connected to the network.

    Read the article

  • How do I create a custom network connection entry?

    - by David Brown
    I have a Sprint MiFi 3G router that exposes its current signal strength over HTTP. I've developed a very simple tray application that displays this. However, what I would really like to do is create a custom network connection entry so the router's 3G signal strength (along with the current network version) displays when clicking on the network connections tray icon (in Windows 7, at least). Is it possible to do this with a shell extension or something (preferably in C#)? If so, how?

    Read the article

  • httpd.conf configuration - for internal/external access

    - by tom smith
    hey. after a lot of trail/error/research, i've decided to post here in the hopes that i can get clarification on what i've screwed up... i've got a situation where i have multiple servers behind a router/firewall. i want to be able to access the sites i have from an internal and external url/address, and get the same site. i have to use portforwarding on the router, so i need to be able to use proxyreverse to redirect the user to the approriate server, running the apache/web app... my setup the external urls joomla.gotdns.com forge.gotdns.com both of these point to my router's external ip address (67.168.2.2) (not really) the router forwards port 80 to my server lserver6 192.168.1.56 lserver6 - 192.168.1.56 lserver9 - 192.168.1.59 lserver6 - joomla app lserver9 - forge app i want to be able to have the httpd process (httpd.conf) configured on lserver6 to be able to allow external users accessing the system (foo.gotdns.com) be able to access the joomla app on lserver6 and the same for the forge app running on lserver9 at the same time, i would also like to be able to access the apps from the internal servers, so i'd need to be able to somehow configure the vhost setup/proxyreverse setup to handle the internal access... i've tried setting up multiple vhosts with no luck.. i've looked at the different examples online.. so there must be something subtle that i'm missing... the section of my httpd.conf file that deals with the vhost is below... if there's something else that's needed, let me know and i can post it as well.. thanks -tom ##joomla - file /etc/httpd/conf.d/joomla.conf Alias /joomla /var/www/html/joomla <Directory /var/www/html/joomla> </Directory> # Use name-based virtual hosting. #NameVirtualHost *:80 # NOTE: NameVirtualHost cannot be used without a port specifier # (e.g. :80) if mod_ssl is being used, due to the nature of the # SSL protocol. # VirtualHost example: # Almost any Apache directive may go into a VirtualHost container. # The first VirtualHost section is used for requests without a known # server name. #<VirtualHost *:80> # ServerAdmin [email protected] # DocumentRoot /www/docs/dummy-host.example.com # ServerName dummy-host.example.com # ErrorLog logs/dummy-host.example.com-error_log # CustomLog logs/dummy-host.example.com-access_log common #</VirtualHost> NameVirtualHost 192.168.1.56:80 <VirtualHost 192.168.1.56:80> #ServerAdmin [email protected] #DocumentRoot /var/www/html #ServerName lserver6.tmesa.com #ServerName fforge.tmesa.com ServerName fforge.gotdns.com:80 #ErrorLog logs/dummy-host.example.com-error_log #CustomLog logs/dummy-host.example.com-access_log common #ProxyRequests Off ProxyPass / http://192.168.1.81:80/ ProxyPassReverse / http://192.168.1.81:80/ </VirtualHost> <VirtualHost 192.168.1.56:80> #ServerAdmin [email protected] DocumentRoot /var/www/html/joomla #ServerName lserver6.tmesa.com #ServerName fforge.tmesa.com ServerName 192.168.1.56:80 #ErrorLog logs/dummy-host.example.com-error_log #CustomLog logs/dummy-host.example.com-access_log common #ProxyRequests Off </VirtualHost>

    Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >