Search Results

Search found 3461 results on 139 pages for 'drives'.

Page 79/139 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

• Remote Desktop Connection - Connection Failed

  - by NLV

  Let me explain the problem. My system is connected to a network and 'was' having XP installed in it. Recently i formatted the system and installed windows server 2003 and added the machine to the network. Everything is working fine like mapping the network drives, pinging the machines etc. But i've the following problems. I'm not able to do a remote desktop connection to another system in the network. Some systems in the network is able to do a remote desktop to my machine. But not all. If i host any web service in my system i'm not able to connect it from any other machine in the network. I've already configured the Remote Desktop to accept connections. Any ideas? NLV

  Read the article

• BIOS flash XP, 1 long beep, 2 short beeps, over&over

  - by Paul

  BIOS issue on HP dv9233cl laptop, wiped drive of Vista, loaded XP, not all the drives loaded. Went to the HP website, downloaded all drivers for this laptop. Started loading them. Loaded WIN Flash HP Network System BIOS Window SP42187. After a minute a low resolution screen appeared stating "It is now safe to turn off the computer" I waited a minute and half. Turned it off. Let it set 10 seconds try to start and No screen images at all and a nasty loud long beep 2 short beeps, 2 seconds of silence and it happens over & over again. I have unplugged/removed battery, still same problem, Any sugg.... Thx.. Paul

  Read the article

• Using "offline files sync" to sync with a local resource [closed]

  - by Kije

  Possible Duplicate: Which is the best application to Sync two folders? I have been trying get my machine (XP-Pro SP3) to sync files to a local USB drive in the same way as I can with mapped network drives. I particularly want to the sync to happen automatically when the USB is connected - in the same way that Off-line files will sync when the network drive comes on line. I can get a folder on the USB mounted as a network drive, but cannot get XP to offer the off-line files functionality. I have tried MS's SyncToy - it works as advertised, and will do scheduled and ad-hoc sync's, but does not seem to offer automatic syncs. I suspect I could do this by plugging my USB into another machine on my network - but that seems heavy handed. All insight appreciated - If you know this cannot be done please say so.

  Read the article

• Why does my ReadyNas 4200 have a constant beep post disk failure

  - by swagner88

  Went to check on a high pitched constant beep coming from the server room and discovered that all the LED lights on the disks were black except one which had a constant green. Post a Re-boot nothing changed. Console indicated that that particular drive has failed. Pulled the drive out and BAM everything is fine. Except, the high pitched beep remains. Plan is currently to replace the drive with a new same size drive we happen to have purchased for expansion. My question is, what will this do? Will the NAS accept the new drive as a replacement for the failed one and decide to shut-up? The Manual for the device is almost to straight forward and says that I can just swap drives out as I need but I find that difficult to believe: http://www.readynas.com/download/documentation/HM/RN4200_HW_24May10.pdf

  Read the article

• Mac OS X Server 10.6 - Apple's software mirrored RAID worth it?

  - by Arko

  Hi, I am installing an Intel Xserve (Quad core Xeon) with Snow Leopard Server (10.6) on two 80Gb 7200rpm SATA HDs. I created a mirrored RAID set using Disk Utility with those two drives, all went fine. I was then asking myself if this is really a good idea. I know that an hardware RAID system would be better, but what about this software RAID? Have you any feedback on this? Will it work fine if one HD breaks down? Does this affect performance? [UPDATE] In short: Hardware RAID is better than software RAID which is better than none. Thank you all for the answers, they were very helpful. Especially Gordon's script to monitor failures. As Apple's software RAID is pretty silent about a drive failure.

  Read the article

• logon script not running

  - by Morten

  i tried make a logon script to map some network drives since it need more than homedir only but when i apply to script to "logon" in a GPO on server 2008 it doesnt run it on the pc when i logon. when i make a Gpresult -r it show as applied but it never ran the script. i tried run the script manual and that works fine. In Event Viewer in windows 7 it show an error "Event ID 1129" with this text in the general tap: The processing of Group Policy failed because of lack of network connectivity to a domain controller. This may be a transient condition. A success message would be generated once the machine gets connected to the domain controller and Group Policy has succesfully processed. If you do not see a success message for several hours, then contact your administrator.

  Read the article

• HP Recovery options: System Recovery not showing

  - by sha404

  I am using HP Pavilion dv4 notebook. Previously, there were following options in Recovery Manager(using f11 during boot): +System Recovery +Factory Restore +Minimized Image Recovery The System Recovery option allows me to restore only Operating system drive e.g. C:\ drive, keeping all other user (me) created hard drives intact. I made a set of recovery disk. Since then I don't see the System Recovery option in HP Recovery Manager. But all other options are still there. But when I use recovery disks that i created earlier, that option e.g. System Recovery is shown. But It's really boring and time consuming to use disks for recovery. So, what's the problem with internal HP Recovery Manager? Why isn't it showing that option?

  Read the article

• Tunneling a TCP/IP Connection through Remote Desktop Connection

  - by Kristopher Johnson

  There is a remote Windows server on a private network which I can connect to via Remote Desktop Connection. I would like to be able to make TCP/IP connections from my computer to other computers on that server's network. Remote Desktop Connection makes it possible to share printers, drives, and other local resources through the connection. Is there any way to "tunnel" a TCP/IP connection via RDC? I'd like something similar to the port-forwarding provided by SSH. I don't see any way to do this via RDC, but I'm hoping the capability is there and I just don't know about it.

  Read the article

• Make windows 7 client compatible with windows 2003 server

  - by caspert

  Hi, I am sysadmin for a small business with 30 clients. We have a server running windows 2003 and all the client-computers run windows XP. Now this is not an important issue, but it would be nice if it worked. My personal (home) computer is running windows 7 RC. When I bring my home-computer to work and log into the network with domain\username it logs me in just fine. Although, approving my profile, letting me into the network, including all network drives and printers, it does not download the profile fully. I do believe it might be getting the roaming profiles. So all my user- items, documents etc. attached to the profile does not show up on Windows 7. Is there any way to make it fully download the profile? as it does with Windows XP.

  Read the article

• Disable SSD in ASUS 900 running Ubuntu 9.10

  - by ashays

  Recently I managed to completely mess up my ASUS 900, but I have no immediate desire to upgrade since it's only my travel laptop (and I'm waiting for a few months to see if anything interesting comes out). For now, though, I've hit an interesting problem. The 4GB SSD that is soldered onto the motherboard is broken. Since it's soldered on, there's really no hope of replacing it (I believe), so I've been solely running off the 16GB that is inserted into the mini pci-e slot. But since it can't read from the SSD it keeps giving me an error every time it tries to boot and read the ssd. Is there any way to either force Ubuntu to not check the drives on boot or disable the drive altogether, so that I don't have to sit through a 5 minute boot process each time I want to use the computer?

  Read the article

• HP D2D 4312 Bacula configuration

  - by krisdigitx

  I have configured 5 libraries on the HP D2D system Discovery on the Bacula server shows only the last library and not all libraries. Why? [root@server bacula]# iscsiadm --mode discovery --type sendtargets --portal 10.66.59.114 10.66.59.114:3260,1 iqn.1986-03.com.hp:storage.d2dbs.czj2020vvy.50014380075dca5e.library12.drive1 10.66.59.114:3260,1 iqn.1986-03.com.hp:storage.d2dbs.czj2020vvy.50014380075dcaf2.library12.robotics I can query it fine using... [root@server bacula]# mtx -f /dev/sg2 inquiry Product Type: Tape Drive Vendor ID: 'HP ' Product ID: 'Ultrium 5-SCSI ' Revision: 'ED51' Attached Changer API: No [root@bray bacula]# mtx -f /dev/sg3 inquiry Product Type: Medium Changer Vendor ID: 'HP ' Product ID: 'MSL G3 Series ' Revision: 'EL41' Attached Changer API: No [root@server bacula]# mtx -f /dev/sg3 status Storage Changer /dev/sg3:1 Drives, 97 Slots ( 1 Import/Export ) Data Transfer Element 0:Empty Storage Element 1:Full :VolumeTag=50507F82 Storage Element 2:Full :VolumeTag=50507F83 Storage Element 3:Full :VolumeTag=50507F84 Storage Element 4:Full :VolumeTag=50507F85 Storage Element 5:Full :VolumeTag=50507F86 Storage Element 6:Full :VolumeTag=50507F87 Storage Element 7:Full :VolumeTag=50507F88 Does anyone have any good documentation for implementing Bacula with an HP D2D tape drive for server backups, and how to allocate libraries?

  Read the article

• Imaging Dell OEM Windows 7 install onto other Dell laptops purchased

  - by lolkjmz

  We have ordered 70 dell laptops directly from dell. We are wondering if we can take the existing OEM install of windows on one of the laptops, add some files and then deploy that image to the rest of the laptops. We are trying to avoid making an image from the ground up. I would imagine since we have purchased 70 laptops that the same install would work on all 70 - I am not sure though. I have imaged three laptops with this image and attached them all onto the domain with no problems. They are also all activated. Updates ran fine as well. We are using this to duplicate drives http://www.startech.com/HDD/Duplicators/4-Bay-USB-3-0-eSATA-to-SATA-Standalone-1-3-HDD-Hard-Drive-Duplicator-Dock~SATDOCK4U3RE Will this method work or is there potential for problems in the future?

  Read the article

• RAIDZ vs RAID1+0

  - by Hiro2k

  Hi guys I just got 4 SSDs for my FreeNAS box. This server is only used to serve a single iSCSI extent to my Citrix XenServer pool and was wondering if I should setup them up in a RAIDZ or a RAID 1+0 configuration. This isn't used for anything in production, just for my test lab so I'm not sure which one is going to be better in this scenario. Will I see a major difference in speed or reliability? Currently the server has three 500GB Western Digital Blue drives and it's dog slow when I deploy a new version of our software on it, hence the upgrade.

  Read the article

• OpenVPN DNS: VPN DNS stomping local VPN

  - by Eddie Parker

  I've finally noodled with OpenVPN enough to get it working. Even better, I can mount samba drives, ping network machines through the TUN device, etc - it's all great. However, I'm noticing that if I use the following directive, then some of the machines that are normally visible by the client, on the client's side (i.e., not through the VPN) get masked with some other server out on the Internet. push "dhcp-option DNS 10.0.1.1" # Push our local DNS to clients Is there any way to avoid this, besides hacking the 'hosts' file on the client machine? Ideally I'd like to only use my VPN's DNS for machines within that domain.

  Read the article

• KVM slow guest i/o

  - by Akarot

  Host: Debian 6.0 (squeeze) with qemu-kvm and libvirt from squeeze-backports ii qemu-kvm 1.0+dfsg-8~bpo60+1 ii libvirt-bin 0.9.8-2~bpo60+2 Has 3TB sata drives with software raid and lvm. It has a sequential write speed of ~140MB/s measured with dd bs=1M count=512 if=/dev/zero of=test conv=fdatasync Elevator set to cfq Guest Debian 6.0 (squeeze) Uses LVM as storage. Drivers are virtio and cache='none' Sequential write speed is considerably slower with only 25-50MB/s Elevator set to noop I'm kind of running out of ideas for further tweaks but I'm sure that I/O speed should be much faster because many people are reporting almost native performance with lvm.

  Read the article

• What is the minimum power supply wattage needed for a Pentium 2.4GHz system?

  - by scottmarlowe

  It looks like I've got a dead Antec True 330 power supply in an older desktop that has an Intel D845PESV motherboard, a Pentium 2.4GHz processor, 2 dvd/cd writers, 2 hard drives, and other typical devices. I have an even older computer that is not being used that has a 200W power supply. Can a 200W power supply drive what I've listed above? Or, put another way, what is the minimum power supply specs for the above system? (A new 350W power supply will run me $30--so buying a new one is not a problem--but I'm curious about the question nonetheless).

  Read the article

• DBan not working because disk has bad sectors?

  - by canadiancreed

  Attempting to wipe the drive of a laptop that I have before it's sold, and normally use DBAN to do so. However this time it starts and then finishes instantly with the following message. "DBAN finished with non-fatal errors This is usually cause by disks with bad sectors" Have tried multiple flags such as noverify to force it to skip this check (it doesn't show bad sectors in the OS scan in windows). but the error always comes back. This is the only time that I've seen this message, as every other of the few drives I've used this software on usually take 3-5 hours to do their job.

  Read the article

• What is the deal with hard drive technology moving to 4K sectors, vs. 512 bytes? Are 4K sector disk

  - by Chris W. Rea

  I've noticed that some Western Digital hard drives are now sporting 4K sectors, that is, the sectors are larger: 4096 bytes vs. the actual de facto standard of 512 bytes. So: What's the big deal with 4K sectors? Is it marketing hype, or a real advantage? Why should somebody building a new PC care, or not, about 4K sectors? Why is this transition taking place now? Why didn't it happen sooner? Are there things to look out for when buying a 4K sector hard drive? e.g. incompatibility? Anything else we should know about 4K sectors?

  Read the article

• Windows 7 Reading Proper Disk Usage Statistics on Mounted Volumes

  - by Troy Perkins

  I'm running windows 7 with 2 x 1.5 TBYTE Drives. The second internal drive is setup as a mounted volume as C:\Archives Clicking computer icon in windows explorer, it only shows capacity stats for C: and Not C:\Archives Also, the usage stats that do show for C: show to be 100% capacity red - yet the system runs fine. No warnings. Can someone explain this? I do have a lot of stuff on the c: drive, but I'm sure its not 1.5 TB worth and C:\Archives hardly has anything it. Thanks! Troy

  Read the article

• Two SATA HDDs connected using a Black Duet HDD Docking Station via eSATA to my Laptop, second drive

  - by leeand00

  Hi I am using a BlacX Duet HDD Docking Station to connect a 1TB WD Caviar Black SATA HDD (WD10000LSRTL) and a HITACHI SATA DESKSTAR (0S00163) to my G51VX (BestBuy) laptop via the eSATA port. When I plug in both HDDs in to the Docking Station, connect the docking station to my laptop and start Windows 7 (64-bit Ultimate), only the HDD in the first drive in the port actually shows up in My Computer and Disk Management. If I swap the drives positions I can get them both to work, but never at the same time. I also checked in the bios settings on the laptop, under Advanced-IDE Configuration-SATA Operation Mode, and it displays: SATA Operation Mode: [Enhanced] AHCI Port0 [Hard Disk] Device: Hard Disk Vendor: ST9320421AS LBA Mode: Supported S.M.A.R.T.: Supported AHCI Port5 [Hard Disk] Device: Hard Disk Vendor: Hitachi HDS721010CLA332 Size: 100.00 GB LBA Mode: Supported S.M.A.R.T.: Supported There should be a third drive, but I'm not certain why it is not being picked up. Additionally, before I played around with the settings in the IDE configuration, it used to display the DVD as well.

  Read the article

• NetApp and SQL Server?

  - by Edinor

  Do you have any good or bad experiences to share running SQL Server OLTP Systems on NetApp appliances? I have been working with a small, relatively low-volume cluster with a lower-end NetApp device, and I have found the environment to be generally unstable, at least compared to my experiences with other SANs, iSCSI arrays, and DAS setups. I struggle to believe that RAID DP and WAFL are more than fairy-dust technologies. A solution has been proposed to me that I just need a bigger, better NetApp, with PAM cards and other cool technology I've not heard of, and I feel like I would be better off spending a quarter of that on good direct-attached drives and a beefy server. At the same time, I feel that an Enterprise-class SAN should be something I can count on to be consistently a more stable, better performer than the less expensive solution I might propose. Are you a SQL Server DBA in an OLTP environment and love your NetApp? If you don't like them, why not?

  Read the article

• Windows 7 won't recognize backup set can I script extracting the files in some other way?

  - by datatoo

  The Windows 7 Backup/Restore created multiple backup sets and I was able to restore the oldest version, but not the most recent, which is not seen by the application. I do see all of the zip files and there are hundreds in later versions. Is there a way to extract each of these correctly outside of the regular restoration method? Perhaps scripting an extract of each day one after another? further clarifying The backup files were all made to an external drive. The original computer died completely, power supply, drives everything. I am trying to reconstruct as much as possible and the only backup set recognized is 6 months older. This was recovered over a new install, but unzipping thousands of zip files is not really a simple unzip copy project as the original paths are not a simple thing to reconstruct.

  Read the article

• Can I get an adapter for usb 3.0 to gigabit, or a gigabit switch with usb 3.0?

  - by techaddict

  Basically I want to be able to attach USB 3.0 external portable hard drives to my network and maintain at least gigabit speeds. I can think of four ways to do this, two of which I know exist: 1) NAS - get an NAS which features USB 3.0 and gigabit 2) Gigabit router with a USB 3.0 port and I want to know if these two exist: 3) gigabit switch (multiple gigabit ports) with at least one USB 3.0 port 4) USB 3.0 to gigabit adapter The gigabit adapter would be similar to this: http://www.addonics.com/products/nas30u2.php except that that is only USB 2.0 so it is not true gigabit, as gigabit is 125MBps but USB 2.0 is only 60MBps, so that adapter only has a maximum transfer speed of 60MBps and the "gigabit" is practically useless.

  Read the article

• How to remove raid 5 array of 5 SAS and use only use one SAS at a time without writing any thing to disc for recovery

  - by murtaza hamid

  I have HP server ML370 g5 with 8 SAS, c drive 1 72 gb raid 0, d drive 2 72 gb raid 0, f drive 5 146 gb raid 5. 2 of 5 sas drive has got bad sectors and raid 5 is showing status failed. now i want to remove all this 5 SAS and put 1 by 1 in any of the bay to make its image for data recovery purpose without writing anything to the drive. how should i proceed. i also want to keep drive c and d intact. also is it possible if i put all this 5 drives in the bay with the same sequense will it recognise the raid 5 array ( i read some where its smart controller..just curious) many thanks in advance.

  Read the article

• How do I change OSX package install directory?

  - by Scott

  It drives me nuts that every time I download a binary to run on OSX that it wants to install in system directories. ~/Applications is a perfectly fine place to install and doesn't require blindly authenticating somebody else's binary. Is there a way to change the install directory for packages? On a few I've been able to open the package and edit the plist to install it elsewhere, but that doesn't work universally. I install from source when I can, but it isn't always an option. Is there a good way to force the installer to use ~/Applications?

  Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >