Search Results

Search found 5658 results on 227 pages for 'eric fail'.

Page 79/227 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

• raid md device is not remove from memory, how to overcome this problem

  - by santhosha

  i create raid 10 , i removed two arrays form md11 one by one , after that i going to editing the contents those are mounted ( it will be not responding stage), after i try for remove arrays those are left it is shows device or resource busy ( is not removed from memory). i try to terminate process this is also not work, i absorve from 4 days resync will be 8.0% it can not modifying. cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec mdadm -D /dev/md11 /dev/md11: Version : 00.90.03 Creation Time : Sun Jan 16 16:20:01 2011 Raid Level : raid10 Array Size : 286743936 (273.46 GiB 293.63 GB) Device Size : 143371968 (136.73 GiB 146.81 GB) Raid Devices : 4 Total Devices : 2 Preferred Minor : 11 Persistence : Superblock is persistent Update Time : Sun Jan 16 16:56:07 2011 State : active, degraded, resyncing Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Layout : near=2, far=1 Chunk Size : 64K Rebuild Status : 8% complete UUID : 5e124ea4:79a01181:dc4110d3:a48576ea Events : 0.23 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 4 8 145 2 faulty spare rebuilding /dev/sdj1 3 8 65 3 active sync /dev/sde1 umount /dev/md11 umount: /dev/md11: not mounted mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 kill -9 2128 kill -9 5018 kill -9 27605 kill -9 30562 kill -3 30591 mdadm -S /dev/md11 mdadm: fail to stop array /dev/md11: Device or resource busy lsof /dev/md11 COMMAND PID USER FD TYPE DEVICE SIZE NODE NAME mount 2128 root 3r BLK 9,11 4058 /dev/md11 mount 5018 root 3r BLK 9,11 4058 /dev/md11 mdadm 27605 root 3r BLK 9,11 4058 /dev/md11 mount 30562 root 3r BLK 9,11 4058 /dev/md11 badblocks 30591 root 3r BLK 9,11 4058 /dev/md11 cat /proc/mdstat Personalities : [raid1] [raid0] [raid6] [raid5] [raid4] [linear] [raid10] md11 : active raid10 sde1[3] sdj14 286743936 blocks 64K chunks 2 near-copies [4/1] [___U] [1:2:3:0] [=...................] resync = 8.0% (23210368/286743936) finish=289392.6min speed=15K/sec

  Read the article

• mysql weird connection problem

  - by santiago.basulto

  Hi guys! I've a weird problem. I've mysql 5.1 installed on my ubuntu 9.04. I've used it a long time (say 3 month) and everything was going right. Until i faced this really weird problem. When i want to connect to a random database i get this message: ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... Connection id: 1 Current database: test_cake ERROR 2006 (HY000): MySQL server has gone away No connection. Trying to reconnect... ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) ERROR: Can't connect to the server It only happens with some databases, while others are totally usefull and healthy. After that, if i try to restart the server i get this. shell /etc/init.d/mysql restart * Stopping MySQL database server mysqld cat: /var/run/mysqld/mysqld.pid: Permiso denegado [fail] * Starting MySQL database server mysqld cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado cat: /var/run/mysqld/mysqld.pid: Permiso denegado [fail] ("permiso denegado" is "permission denied"). I don't know what to do. I change the /var/run/mysqld/mysqld.pid attributes but still not working. Can anybody help me ?

  Read the article

• Can't access IIS 7 server URL from the same IIS 7 server.

  - by Kevin Raffay

  We have an intranet site ie, xxx.yyyy.com, that users access by entering "http"://xxx.yyy.com. Our problems started when we migrated to IIS 7 running on a new 2003 server. We got rid of our single-sign on code and implemented a security model where we capture a user's domain credentials which we then authenticate against a DB. In order to get the domain credentials passed to our ASP.NET app, we have the following settings: Anonymous Authentication:Disabled ASP.NET Impersonation: Enabled Basic/Digest/Forms Authentication: Disabled Windows Authentication: Enabled We allow "*" and deny "?" in the web.config. Browsing "http"://xxx.yyy.com from any client PC results in a domain login prompt, and if your enter a proper user/pwd, you can get in. However, browsing "http"://xxx.yyy.com while remoting into the server results in 3 domain login prompts and eventually a 401 error - unauthorized. We have traced this behavior to problems with our web site where we have pages doing "screen scraping" using the HttpRequest calling a url on the same server. When doing a HttpRequest from any other client, using a test harness that passes authorized credentials, all is good. So internal HttpRequest calls on the server fail, just like attempts to browse that server's url from within a remote session. Why would a to "http"://xxx.yyy.com on server xxx.yyy.com fail authentication?

  Read the article

• SQL Server Management Studio not scripting all objects

  - by Ian Boyd

  i've been attempting to script a database using SQL Server 2005 Management Studio. i cannot get it to script some objects. It scripts others, but skips some. i can provide detailed screen shots the options being selected including all tables the folder where the script files will go the folder being empty before scripting the scripting process saying Sucess when scripting a table the destination folder no longer empty, with a hundred or so script files the script of some tables not being in the folder. And earlier SSMS would not script some views. Is this a known thing that the the Generate Scripts task does not generate scripts? Update Known issue on Microsoft Connect, but Microsoft couldn't repro the steps, so they closed closed the ticket. Fails on SQL Server 2005, also fails on SQL Server 2008. Update Two Some basic questions: 1.What version of SQL Server? Microsoft SQL Server 2000 - 8.00.194 (Intel X86) Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Microsoft SQL Server 2008 - 10.0.2531.0 (Intel X86) Microsoft SQL Server 2005 Management Studio: 9.00.4035.00 Microsoft SQL Server 2008 Management Studio: 10.0.1600.22 2.What O/S are you running on? Windows Server 2000 Windows Server 2003 Windows Server 2008 3.How are you logging in to SQL server? sa/password Trusted authentication 4.Have you verified your account has full access to all objects? Yes, i have access to all objects. 5.Can you use the objects that fail to script? (eg: select top(10) * from nonScriptingTable) Yes, all objects work fine. SQL Server Enterprise Manager can script the objects fine. Update Three They fail no matter what version of SQL Server you script against. It wasn't a problem in Enterprise Manager: Client Tools SQL Server 2000 SQL Server 2005 SQL Server 2008 ============ =============== =============== =============== 2000 Yes n/a n/a 2005 No No No 2008 No No No Update Four No errors found in the database using: DBCC CHECKDB go DBCC CHECKCONSTRAINTS go DBCC CHECKFILEGROUP go DBCC CHECKIDENT go DBCC CHECKCATALOG go EXECUTE sp_msforeachtable 'DBCC CHECKTABLE (''?'')' Honk if you hate SSMS.

  Read the article

• vsftp login errors 530 login incorrect

  - by mcktimo

  Using Ubuntu 10.04 on an aws ec2 instance. I was happy just using ssh but then a wordpress plugin needs ftp access...I just need ftp access for one site www.sitebuilt.net which is in /home/sitebuil. I installed a vftpd and pam and followed suggestions that got me to the following state /etc/vftpd.conf listen=YES anonymous_enable=NO local_enable=YES write_enable=YES dirmessage_enable=YES use_localtime=YES xferlog_enable=YES connect_from_port_20=YES xferlog_file=/var/log/vsftpd.log secure_chroot_dir=/var/run/vsftpd/empty pam_service_name=vsftpd rsa_cert_file=/etc/ssl/private/vsftpd.pem guest_enable=YES user_sub_token=$USER local_root=/home/$USER chroot_local_user=YES hide_ids=YES check_shell=NO userlist_file=/etc/vsftpd_users /etc/pam.d/vsftpd # Standard behaviour for ftpd(8). auth required pam_listfile.so item=user sense=deny file=/etc/ftpusers onerr=succeed # Note: vsftpd handles anonymous logins on its own. Do not enable pam_ftp.so. # Standard pam includes @include common-account @include common-session @include common-auth auth required pam_shells.so # Customized login using htpasswd file auth required pam_pwdfile.so pwdfile /etc/vsftpd/passwd account required pam_permit.so session optional pam_keyinit.so force revoke auth include system-auth account include system-auth session include system-auth session required pam_loginuid.so /etc/vsftpd_users sitebuil tim /etc/passwd ... sitebuil:x:1002:100:sitebuilt systems:/home/sitebuil:/bin/sh ftp:x:108:113:ftp daemon,,,:/srv/ftp:/sbin/nologin /etc/vsftpd/passwd sitebuil:Kzencryptedpwd /var/log/vftpd.log Wed Feb 29 15:15:48 2012 [pid 20084] CONNECT: Client "98.217.196.12" Wed Feb 29 15:16:02 2012 [pid 20083] [sitebuil] FAIL LOGIN: Client "98.217.196.12" Wed Feb 29 16:12:33 2012 [pid 20652] CONNECT: Client "98.217.196.12" Wed Feb 29 16:12:45 2012 [pid 20651] [sitebuil] FAIL LOGIN: Client "98.217.196.12"

  Read the article

• Windows 2008 R2 remote desktop - Double Login

  - by Zulgrib

  After an Active Directory fail RDP connection started to ask for credentials twice (once on local RDP program, second time on remote's logon screen) I already looked at Windows 2008 R2 RDS - Double Login Solution provided there doesn't work for me. The server is alone, without AD/DNS services, RDP service isn't installed I tried every security settings on RDP-Tcp (RDP, Negotiate, SLL) Logon option is set to "Use credentials from the client" Both windows client and server use RDP 7.1 fPromptForPassword regitries are set to 0 Local Computer Policy\Administrative Templates\Windows Components\Remote Desktop Services\Remote Desktop Session Host\Security\Always prompt for password upon connection is set to "Disabled" Why i am sure the problem comes from the server and not the client ? This problem affected a 3rd RDP program on Android too (it was directly showing "preparing desktop previously, on both MS RDP and the 3rd program) No bakcup are available (Else the Active Directory wouldn't be a fail, but just a lose of time) I am wondering if a rule linked to RDP got changed after the AD install+unistall, but i'm unable to find where. While this is not a critic problem, this is very annoying. I don't know if more information are needed, if it's the case and if you are patient enough, please tell me what is missing and i'll edit this post to add the missing informations.

  Read the article

• Alternate way to connect a vpn through a MIFI

  - by questor

  This has gotten to be a major problem at our company and depending on who I ask, the problem either does not really exist (mfr. and vendor) or is insoluble ( according to most users including techs who know how to prove their point). The problem involves getting a normal Windows 7 system to connect to a normal Server 2008 R2 Server over a cellular router (usually called a Mifi). A very few brands/models appear to work but the majority cannot make the connection. Since it is a cellular device, there are many variables that come into play and I wondered if anyone had ever found a consistent way to either make one work or else prove to the providers that their equipment was at fault. They all specifically state “VPN use” on the sales brochures. But few if any work. And those that do are not reliable. From a standpoint of pure knowledge, I just wondered if anyone knew the real reason why they fail? Pptp, L2tp, IPsec doesn’t matter. I have not tried Shrew or OpenVPN and am using strictly MS Windows protocols. Plenty of Google Searches back up my complaints but none seem to be any closer to knowing "why" they fail, just that they do. This is a "quest for knowledge"question. I don't expect a solution. Just a reason for the problem if anyone has any ideas.

  Read the article

• SQL Server Management Studio not scripting all objects

  - by Ian Boyd

  i've been attempting to script a database using SQL Server 2005 Management Studio. i cannot get it to script some objects. It scripts others, but skips some. i can provide detailed screen shots the options being selected including all tables the folder where the script files will go the folder being empty before scripting the scripting process saying Sucess when scripting a table the destination folder no longer empty, with a hundred or so script files the script of some tables not being in the folder. And earlier SSMS would not script some views. Is this a known thing that the the Generate Scripts task does not generate scripts? Update Known issue on Microsoft Connect, but Microsoft couldn't repro the steps, so they closed closed the ticket. Fails on SQL Server 2005, also fails on SQL Server 2008. Update Two Some basic questions: 1.What version of SQL Server? Microsoft SQL Server 2000 - 8.00.194 (Intel X86) Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Microsoft SQL Server 2008 - 10.0.2531.0 (Intel X86) Microsoft SQL Server 2005 Management Studio: 9.00.4035.00 Microsoft SQL Server 2008 Management Studio: 10.0.1600.22 2.What O/S are you running on? Windows Server 2000 Windows Server 2003 Windows Server 2008 3.How are you logging in to SQL server? sa/password Trusted authentication 4.Have you verified your account has full access to all objects? Yes, i have access to all objects. 5.Can you use the objects that fail to script? (eg: select top(10) * from nonScriptingTable) Yes, all objects work fine. SQL Server Enterprise Manager can script the objects fine. Update Three They fail no matter what version of SQL Server you script against. It wasn't a problem in Enterprise Manager: Client Tools SQL Server 2000 SQL Server 2005 SQL Server 2008 ============ =============== =============== =============== 2000 Yes n/a n/a 2005 No No No 2008 No No No Update Four No errors found in the database using: DBCC CHECKDB go DBCC CHECKCONSTRAINTS go DBCC CHECKFILEGROUP go DBCC CHECKIDENT go DBCC CHECKCATALOG go EXECUTE sp_msforeachtable 'DBCC CHECKTABLE (''?'')' Honk if you hate SSMS.

  Read the article

• What breaks in a Windows domain if a member has a high time skew?

  - by Ryan Ries

  It's taken for granted by most IT people that in a Windows domain, if a member server's clock is off by more than 5 minutes (or however many minutes you've configured it for) from that of its domain controller - logons and authentications will fail. But that is not necessarily true. At least not for all authentication processes on all versions of Windows. For instance, I can set my time on my Windows 7 client to be skewed all to heck - logoff/logon still works fine. What happens is that my client sends an AS_REQ (with his time stamp) to the domain controller, and the DC responds with KRB_AP_ERR_SKEW. But the magic is that when the DC responds with the aforementioned Kerberos error, the DC also includes his time stamp, which the client in turn uses to adjust his own time and resubmits the AS_REQ, which is then approved. This behavior is not considered a security threat because encryption and secrets are still being used in the communication. This is also not just a Microsoft thing. RFC 4430 describes this behavior. So my question is does anyone know when this changed? And why is it that other things fail? For instance, Office Communicator kicks me off if my clock starts drifting too far out. I really wish to have more detail on this. edit: Here's the bit from RFC 4430 that I'm talking about: If the server clock and the client clock are off by more than the policy-determined clock skew limit (usually 5 minutes), the server MUST return a KRB_AP_ERR_SKEW. The optional client's time in the KRB-ERROR SHOULD be filled out. If the server protects the error by adding the Cksum field and returning the correct client's time, the client SHOULD compute the difference (in seconds) between the two clocks based upon the client and server time contained in the KRB-ERROR message. The client SHOULD store this clock difference and use it to adjust its clock in subsequent messages. If the error is not protected, the client MUST NOT use the difference to adjust subsequent messages, because doing so would allow an attacker to construct authenticators that can be used to mount replay attacks.

  Read the article

• Cannot Kill Process in Vista 64

  - by JanSolo

  Hi I have a weird situation where a Zombie process is causing my Vista64 Dev machine to become useless. I use Incredibuild 3.40 to distribute builds of a large software product that I work on. Occasionally, a build will fail and a Zombie process is left behind. The process holds a handle to a file that is needed by the build system to retry the build. Since I cannot kill the process, the handle remains open and I cannot build my code at all. I've tried TargetManager and ProcessExplorer, but neither can kill this process. It gets worse; since Vista cannot kill all its processes, my PC refuses to shut down correctly, requiring a hard reboot after each failed build. Is there a way to really-really-kill a process in Vista? Or maybe a way to force a file handle to close? Any help is appreciated. Cheers Jan. EDIT: This is still occurring. I've used Lockhunter (which appears to successfully unlock the file handle), but retrying the build still fails because the (now unlocked) file cannot be deleted. Explorer and Lockhunter both fail to delete the file. LockHunter also tells me that there are no processes that hold handles to it. Basically, nothing owns it, but you still cant delete it. This sucks.

  Read the article

• Router failover not detecting outside interface link lost

  - by Matt

  Suppose I have two routers configured in master/slave configuration. They look something like this (addresses are not real ones) 123.123.123.10 <===> [eth0] Router 1 (10.1.1.2) [eth1] ===> +----------+ | 10.1.1.1 | ===> LAN 172.123.123.10 <===> [eth0] Router 2 (10.1.1.3) [eth1] ===> +----------+ The 10.1.1.1 is the default route for the Network (10.1.1.0). What's slightly different in this config to other's I've seen is that I don't have an external virtual IP. Also, the 10.1.1.1 addresses are in real life, public IP's (not private ones shown here). This is more of a router setup than a firewall setup so I'm not using NAT here. Now the issue that I'm having is that I can't see any way to configure UCARP or VRRP to monitor both eth0 & eth1 and fail over to the backup router should either of them go down. What I'm seeing is that if Router1 is the master and I unplug eth0 on router1, it doesn't fail over to router 2. However, it will if instead I unplug eth1 of router 1. In VRRP I see there is a cluster group, but it seems that for this to work you need to have virtual ip's or vrrp instances rather than actual interfaces assigned to it. I hope my explanation is clear. How do I get around this?

  Read the article

• Accounting setup in freeradius with mikrotik and the "always" module

  - by Matt

  I have a freeradius setup that is being used to provide authentication for users on a wireless network. The access points are all Mikrotik hardware and the users are connected 24/7. We've been using Daloradius with mysql and freeradius 2. The boss wants to use the accounting information and while this is all set up and appears to be working, I've found that not all the accounting information is present. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly. So he started poking around at this link: http://wiki.mikrotik.com/wiki/RouterOs_MySql_Freeradius#Configuring_RouterOs_for_Radius_.26_PPP.2A_AAA And was looking specifically at the following section. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly always fail { rcode = fail } always reject { rcode = reject } always ok { rcode = ok simulcount = 0 mpp = no } However, that link references freeradius 1 and I can't find this in the radius.conf file for freeradius 2. What does it do and could it be a reason I'm missing data? EDIT: I have found one issue. We have a backup freeradius server that is also receiving the accounting packets. Although they are replicating, it's only a master/slave configuration. If the slave receives accounting packets it won't replicate them back to the master. Although I suspect this might solve it, the boss is not convinced due to the always module. Is there anything special I need to configure in the mikrotik AP's or freeradius 2 for clients connected 24/7.

  Read the article

• Accounting setup in freeradius with mikrotik and the "always" module

  - by Matt

  I have a freeradius setup that is being used to provide authentication for users on a wireless network. The access points are all Mikrotik hardware and the users are connected 24/7. We've been using Daloradius with mysql and freeradius 2. The boss wants to use the accounting information and while this is all set up and appears to be working, I've found that not all the accounting information is present. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly. So he started poking around at this link: http://wiki.mikrotik.com/wiki/RouterOs_MySql_Freeradius#Configuring_RouterOs_for_Radius_.26_PPP.2A_AAA And was looking specifically at the following section. Since our users may be connected for more than 24 hours at a time we keep this in here, it will reset some attributes daily so that the accounting packets work correctly always fail { rcode = fail } always reject { rcode = reject } always ok { rcode = ok simulcount = 0 mpp = no } However, that link references freeradius 1 and I can't find this in the radius.conf file for freeradius 2. What does it do and could it be a reason I'm missing data? EDIT: I have found one issue. We have a backup freeradius server that is also receiving the accounting packets. Although they are replicating, it's only a master/slave configuration. If the slave receives accounting packets it won't replicate them back to the master. Although I suspect this might solve it, the boss is not convinced due to the always module. Is there anything special I need to configure in the mikrotik AP's or freeradius 2 for clients connected 24/7.

  Read the article

• File corruption after copying files in Windows 7 64 bit using two methods

  - by DustByte

  I have 5000 pictures and other files in a directory taking up 35 GB. I want to duplicate this directory. Method 1: I do a simple copy and paste of the directory in explorer. I have the habit of checking the checksums after copying important files. In this case I noticed that around 2000 files failed the MD5 test. At a closer inspection of a randomly chosen JPEG with different checksums it turns out that some XMP metadata had changed. In particular, the tag <MicrosoftPhoto:DateAcquired> had changed the date from 2009 to today (possibly around the time I was copying the files). I have no idea what triggered this XMP data to be changed and exactly when it was changed and why for these particular files, but at least it seems to explain the checksum discrepancy. Method 2: As I want the exact files to be duplicated, I tried the program FreeFileSync to mirror the directory, hoping no XMP metadata would mysteriously change. A checksum test in addition to a thorough file comparison test in FreeFileSync lead to two similar but yet different results: 31 files fail the checksum test, 23 files fail the file comparison test. The smaller set is not entirely contained in the bigger set, although many files occur in both. What is alarming here is that not only JPEGs are flagged as altered but also som AVIs, MPGs and a large 7-zip file. Closer inspection of a JPEG indicates that it is indeed corrupt: the bottom half of the picture is simply plain gray. Due to the size of the 7-zip file, I have not been able to pin down the discrepancy. Note, in both methods, every file has its correct file size after being copied. Question: Any thoughts on what is possibly going on here? I have never had this problem before, and I am now terrified that files get corrupted after simple actions like copy/paste and file sync. Even if I manage to successfully copy the files somehow, I would still like an explanation to this.

  Read the article

• Binding to LDAPS using PHP failing

  - by Sean

  We've finally set-up our server to accept ldap SSL connections thanks to another question answered by a helpful member. Our problem now is that when attempting to bind to ldap using the below simple PHP script, we constantly fail. Binding using ldap instead of ldaps works just fine using the script so I know the ldap is enabled. The catcher is that while using LDP.exe, we can successfully connect and bind to ldap on port 636 using a secure connection. The script we are failing with is below: <?php $ldap = ldap_connect("ldaps://localhost"); $username="user"; $password="pass"; if($bind = ldap_bind($ldap, $username,$password )) echo "logged in"; else echo "fail"; echo "<br/>done"; ?> We've also attempted inputting the username as "user@domain" or "domain/user" with no success. It seems I'm forever having LDAP/Cert questions. Our environment is Server 2008.

  Read the article

• Probability of Blade Chassis Failure

  - by ChrisZZ

  In my organisation we are thinking about buying blade servers - instead of rack servers. Of course technology vendors also make them sound very nice. A concern, that I read very often in different forums, is, that there is a theoretical possibility of the server chassis going down - which would in consequence take all the blades down. That is due to shared infrastructure. My reaction on this probability would be to have redundancy and by two chassis instead of one (very costly of course). Some people (including e.g. HP Vendors) try to convince us, that the chassis is very very unlikely to fail, due to many redundancies (redundant power supply, etc.). Another concern on my side is, that if something goes down, spare parts might be required - which is difficult in our location (Ethiopia). So I would ask to experienced administrators, that have managed blade server: What is your experience? Do they go down as a whole - and what is the sensible shared infrastructure, that might fail? That question could be extended to shared storage. Again I would say, that we need two storage units instead of only one - and again the vendors say, that this things are so rock solid, that no failure is expected. Well - I can hardly believe, that such a critical infrastructure can be very reliable without redundancy - but maybe you can tell me, whether you have successfull blade-based projects, that work without redundancy in its core parts (chassis, storage...) At the moment, we look at HP - as IBM looks much to expensive... thanks a lot best regards Christian

  Read the article

• rc scripts dependencies

  - by chris

  On a Ubuntu 10.04.1 LTS server install certain services fail to start properly after a reboot. I have a couple of virtual interfaces defined on eth0: /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 172.16.5.240 netmask 255.255.255.0 gateway 172.16.5.1 auto eth0:1 iface eth0:1 inet static address 172.16.5.241 netmask 255.255.255.0 gateway 172.16.5.1 auto eth0:2 iface eth0:2 inet static address 172.16.5.242 netmask 255.255.255.0 gateway 172.16.5.1 auto eth0:3 iface eth0:3 inet static address 172.16.5.243 netmask 255.255.255.0 gateway 172.16.5.1 and so on... The services that try to bind to for example 172.16.5.243 fail during boot, complaining that there is no such IP address. My questions: 1) Are the services started parallel by default? Can I disable that so they run sequentially? 2) Is there a way to define dependencies between rc scripts? I'm only familiar with the defining the order of seqentially started scripts using the numbers in /etc/rc[0-6].d/) Any other fix or workaround appreciated.

  Read the article

• What does this diagnostic output mean?

  - by ChrisF

  I recently had a fault with my broadband connection. It turned out to be a fault with the ISP's or teleco's equipment. My ISP posted this diagnostic, but while I understand it in general, I'd like to to know more about the details. I'm assuming that ATM means Asynchronous Transfer Mode and PPP means Point to Point Protocol. It was this that my router was indicating as the fault. xDSL Status Test Summary Sync Status: Circuit In Sync General Information NTE Status: NTE Power Status: Unknown Bypass Status: Upstream DSL Link Information Downstream DSL Link Information Loop Loss: 9.0 17.0 SNR Margin: 25 15 Errored Seconds: 0 0 HEC Errors: 0 Cell Count: 0 0 Speed: 448 8128 TAM Status: Successfully executed operation Network Test: Sub-Test Results Layer Name Value Status Modem pass Transmitter Power (Upstream) 12.4 dBm Transmitter Power (Downstream) 8.8 dBm Upstream psd -38 dBm/Hz Downstream psd -51 dBm/Hz DSL pass Equipment Vendor Name TSTC Equipment Vendor Id n/a Equipment Vendor Revision n/a Training Time 8 s Num Syncs 1 Upstream bit rate 448 kbps Downstream bit rate 8128 kbps Upstream maximum bit rate 1108 kbps Downstream maximum bit rate 11744 kbps Upstream Attenuation 3.5 dB Downstream Attenuation 0.0 dB Upstream Noise Margin 20.0 dB Downstream Noise Margin 19.0 dB Local CRC Errors 0 Remote CRC Errors 0 Up Data Path interleaved Down Data Path interleaved Standard Used G_DMT INP INP Upstream Symbols n/a INP Upstream Delay 4 ms INP Upstream Depth 4 INP Downstream Symbols n/a INP Downstream Delay 5 ms INP Downstream Depth 32 ATM Reason: No ATM cells received fail Number of cells transmitted 30 Number of cells received 0 number of Near end HEC errors 0 number of Far end HEC errors n/a PPP Reason: No response from peer fail PAP authentication nottested CHAP authentication nottested (I'm not sure that Super User is the best place to ask this, but two people have suggested I ask it here so here I am).

  Read the article

• Replacing DropBox with: Amazon S3 + SSL + GPG/TrueCrypt + Mounting on OSX ??

  - by Matt Rogish

  So, right now we're using DropBox to share various data files around between approximately 10 Mac OS X systems. However, we already have an S3 account and everyone on the lowest DropBox plan of $10/mo seems too expensive. So, I am contemplating something that would allow us to replace DropBox with our own home-grown solution. We are all fairly technical people and/or smart enough to follow some steps, so if it's not as "user friendly" as DropBox we're all comfortable with that. There are plenty of docs out there that have bits and pieces of what I want but some of the tools don't seem to fit the requirements: Transport security via SSL to the bucket Encryption of bucket contents Bi-directional syncing Most of the scripts I can find on the internet use "duplicity" which appears to fail #1 (it doesn't look like duplicity supports SSL to S3 - the docs don't state but the protocol looks plain old http http://www.nongnu.org/duplicity/duplicity.1.html#sect6 ) Many scripts use gpg to encrypt files. This seems like it could work, however I have to make sure that each OSX client is able to use the same key to encrypt and decrypt files (key management is left to me to manage). Finally, most of the scripts use one-way replication, e.g. using Amazon S3 as a simple backup store. As we'd be using Amazon S3 as the "repository" they fail this one. Whew. So, I'd love a single tool that does this but after an exhaustive search I don't think one exists. I'd be happy just knowing which tools out there can fulfill my 3 requirements, after that I can stitch together the rest. Any thoughts? THANKS!

  Read the article

• Exim: send every emails with a predefined sender

  - by Gregory MOUSSAT

  We use Exim on our servers to send emails only from local automated users, as root, cron, etc. We have to specify every possible users into /etc/email-addresses. For example: root: [email protected] cron: [email protected] backup: [email protected] This allow us te receive every email generated. The problem is when we add a user for whatever reason (for example when we add a package, some add a user), we can forget to add this user to /etc/email-addresses. Most of the time it's not a problem, but this is not clean. And the overall method is not clean. We'd like to configure Exim to send every emails with the same source address. i.e. every sent email comes from [email protected] One way could be to use a wildcard or a regular expression into /etc/email-addresses but this is not supported. I don't currently understand Exim enought to figure out how to modify this in a way or another. Ideally, Exim should look into /etc/email-addresses first, and if no match it use the predefined address. But this is very secondary. There are two places where this address is used: 1. when Exim send the FROM: command to the smtp server 2. inside the header edit: The rewrite section is the original one from Debian begin rewrite .ifndef NO_EAA_REWRITE_REWRITE *@+local_domains "${lookup{${local_part}}lsearch{/etc/email-addresses} \ {$value}fail}" Ffrs *@ETC_MAILNAME "${lookup{${local_part}}lsearch{/etc/email-addresses} \ {$value}fail}" Ffrs .endif (comments removed)

  Read the article

• smartctl short test doesn't seem to complete

  - by Cédric COPY

  I am working on project which involve automated HDD testing through smartctl. The station is working fine on most product, but I have two specific products that fail the smartctl test. Those two product are both WD product (WD2500BUDT series) Smartctl behaviour is quite strange, in fact the test is launched without any problem, i wait about 2min (test length), and when i check the smartctl, i have got no result at all. It's like I hadn't launched any test (no fail, no success in smartctl result). No error return on command, nothing in syslog, .. As i said before, the test is working for other product, thousands products worked well with this test. The main smartctl command used are : smarctl -t shortest /dev/sdX #Launch test smartctl -l selftest /dev/sdX #Look at test result I have tried to use: smartctl -s on /dev/sdX or smartctl -o on /dev/sdX But doesn't change anything. The system is using Debian 6.0, smartctl v5.40 (rev 3124) x86_64, HDD are plug through SATA to PCI controller. I have 4 HDD connected at a time. Well if anyone has some hints to give with this problem, because I have no idea how can i fix this. Thanks in advance. PS: Not sure if it was a serverfault topic, sorry if i was wrong!

  Read the article

• FreeBSD's ng_nat stopping pass the packets periodically

  - by Korjavin Ivan

  I have FreeBSD router: #uname 9.1-STABLE FreeBSD 9.1-STABLE #0: Fri Jan 18 16:20:47 YEKT 2013 It's a powerful computer with a lot of memory #top -S last pid: 45076; load averages: 1.54, 1.46, 1.29 up 0+21:13:28 19:23:46 84 processes: 2 running, 81 sleeping, 1 waiting CPU: 3.1% user, 0.0% nice, 32.1% system, 5.3% interrupt, 59.5% idle Mem: 390M Active, 1441M Inact, 785M Wired, 799M Buf, 5008M Free Swap: 8192M Total, 8192M Free PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 11 root 4 155 ki31 0K 64K RUN 3 71.4H 254.83% idle 13 root 4 -16 - 0K 64K sleep 0 101:52 103.03% ng_queue 0 root 14 -92 0 0K 224K - 2 229:44 16.55% kernel 12 root 17 -84 - 0K 272K WAIT 0 213:32 15.67% intr 40228 root 1 22 0 51060K 25084K select 0 20:27 1.66% snmpd 15052 root 1 52 0 104M 22204K select 2 4:36 0.98% mpd5 19 root 1 16 - 0K 16K syncer 1 0:48 0.20% syncer Its tasks are: NAT via ng_nat and PPPoE server via mpd5. Traffic through - about 300Mbit/s, about 40kpps at peak. Pppoe sessions created - 350 max. ng_nat is configured by by the script: /usr/sbin/ngctl -f- <<-EOF mkpeer ipfw: nat %s out name ipfw:%s %s connect ipfw: %s: %s in msg %s: setaliasaddr 1.1.%s There are 20 such ng_nat nodes, with about 150 clients. Sometimes, the traffic via nat stops. When this happens vmstat reports a lot of FAIL counts vmstat -z | grep -i netgraph ITEM SIZE LIMIT USED FREE REQ FAIL SLEEP NetGraph items: 72, 10266, 1, 376,39178965, 0, 0 NetGraph data items: 72, 10266, 9, 10257,2327948820,2131611,4033 I was tried increase net.graph.maxdata=10240 net.graph.maxalloc=10240 but this doesn't work. It's a new problem (1-2 week). The configuration had been working well for about 5 months and no configuration changes were made leading up to the problems starting. In the last few weeks we have slightly increased traffic (from 270 to 300 mbits) and little more pppoe sessions (300-350). Help me please, how to find and solve my problem?

  Read the article

• Server 2008 Print Redirection is failing but only on 16Bit apps

  - by ian

  the main programmer for SoEasyAccounting and we are installing to Server 2008 Standard service pack 1. We install to 2003 with no problems. Important to understand that the print failure only happens in certain circumstances: Note: We use a standard Windows printer selection box to choose the printer Terms used Superbase = a program language that uses ntvdm.exe (Windows process hosting 16 bit apps) Local Printer = printing to a driver loaded onto the Server 2008 Redirect Printer = printing to a automatically established remote printer through an RDP connection Printing Scenarios Server 2008 - 1: Print from notepad to a Redirected Printer = works Server 2008 - 2: Print from Superbase to a Local Printer = works Server 2008 - 3: Print from Superbase to a Redirected Printer = fail Server 2003 - 4: Print from Superbase to a Redirected Printer = works Results The print causes a message in the drivers print queue of Local Downlevel Document, no print though and Superbase recognises that the "Print command failed". Eventvwr has no related issues to the print fail Any help greatly appreciated. So far 2 days spent trying to resolve and here goes my weekend :( unless someone has an idea :) Things I have Tried i. Switching on/off Easy print ii. Loading copy of redirected driver on server

  Read the article

• CentOS 6.3 Virtual under OpenVZ cannot ping, host lookups, outbound connections while postfix running

  - by Paul Cravey

  My best theory is that some kernel limit is being hit preventing outbound connections. We have tried basically everything from tcpdumps to provisioning an entirely new virtual server (we do not have this problem on any other virtuals), however the problem somehow carried over, even with new postfix build (working). Emails work, and outbound connections work, so long as postfix does not have too much going on. /proc/user_beancounters shows no limits being hit (show below). Nevertheless, pings fail even to IP addresses. TCP stack appears healthy. Load is low. No iowait. Flushed iptables already. Has anyone experienced anything like this? uid resource held maxheld barrier limit failcnt 3: kmemsize 166216365 170262528 9223372036854775807 9223372036854775807 0 lockedpages 0 0 9223372036854775807 9223372036854775807 0 privvmpages 285727 351885 9223372036854775807 9223372036854775807 0 shmpages 16933 17605 9223372036854775807 9223372036854775807 0 dummy 0 0 0 0 0 numproc 150 303 9223372036854775807 9223372036854775807 0 physpages 314156 326191 0 1280000 0 vmguarpages 0 0 9223372036854775807 9223372036854775807 0 oomguarpages 165355 165355 9223372036854775807 9223372036854775807 0 numtcpsock 89 172 9223372036854775807 9223372036854775807 0 numflock 22 76 9223372036854775807 9223372036854775807 0 numpty 1 2 9223372036854775807 9223372036854775807 0 numsiginfo 0 75 9223372036854775807 9223372036854775807 0 tcpsndbuf 2733472 4371752 9223372036854775807 9223372036854775807 0 tcprcvbuf 1798336 5427296 9223372036854775807 9223372036854775807 0 othersockbuf 491120 1000760 9223372036854775807 9223372036854775807 0 dgramrcvbuf 0 238728 9223372036854775807 9223372036854775807 0 numothersock 361 505 9223372036854775807 9223372036854775807 0 dcachesize 135941831 136114679 9223372036854775807 9223372036854775807 0 numfile 2905 4990 9223372036854775807 9223372036854775807 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 numiptent 8 9 9223372036854775807 9223372036854775807 0 [root@bni /]# ping 4.2.2.1 PING 4.2.2.1 (4.2.2.1) 56(84) bytes of data. --- 4.2.2.1 ping statistics --- 9 packets transmitted, 0 received, 100% packet loss, time 8493ms [root@bni /]# service postfix stop [root@bni /]# ping 4.2.2.1 PING 4.2.2.1 (4.2.2.1) 56(84) bytes of data. 64 bytes from 4.2.2.1: icmp_seq=1 ttl=53 time=8.63 ms 64 bytes from 4.2.2.1: icmp_seq=2 ttl=53 time=8.62 ms 64 bytes from 4.2.2.1: icmp_seq=3 ttl=53 time=8.63 ms 64 bytes from 4.2.2.1: icmp_seq=4 ttl=53 time=8.66 ms Outbound connections of all sorts fail when postfix is running.

  Read the article

• What Windows service binds a NIC to the network?

  - by Bigbio2002

  I have a server that takes several minutes for the NIC to bind itself to the network upon startup (it has a statically-configured IP). This causes DNS/WINS/Intersite Messaging to fail to start, since they're dependent on a network connection. While I'm still attempting to find a root cause to this issue (I've done firmware updates, checked for any odd drivers/services, no luck so far), but in the meantime, I want to adjust the load order of services to ensure that the NIC binds first before these services attempt to start. The only question is, which service is it? The server is running Server 2008 R2 and only has one NIC installed. (On a side note, there are two other small but odd problems occuring with the server. The server had the issue described in KB2298620, which I've fixed. The other problem occurs in Windows Server Backup. No events appear in the upper portion of the window, despite the fact that backups are running in the background. Whenever I attempt to modify the backup schedule, it gives me the error "Not enough storage is available to process this command" and appears to fail, when, in fact, it actually succeeds. These may be separate issues, but something tells me that some of these might share a common root cause.)

  Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >