Search Results

Search found 2863 results on 115 pages for 'sms gateway'.

Page 79/115 | < Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >

• Using a Dell PowerConnect to set up load balancing/redundancy, 1 switch 2 routres 2 private wan link

  - by MarianoC

  Hi, We have different locations connected by two different WAN providers. Each site has a dell powerConnect 6224 and two cisco routers with the WAN connections (we don’t have access to router admin). The 6224 connects to each cisco LAN port and to our LAN backbone. We would like the 6224 provide the ip gateway address and load balance and support redundancy, if one of the routes fail. Is this possible?. We can't find any samples on doing this and we have tried with no success. Any help or link to documentation regarding this, will be greatly appreciated. Thanks, MarianoC

  Read the article

• XenServer 5.6.1-fp1. Can't get network working

  - by casey_miller

  I have a PC where XenServer 5.6.1 fp-1 has been successfully installed. I've manually set the network settings: 192.168.1.50 255.255.255.0 192.168.1.1 but it's set to xenbr0 iface. While eth0 is empty. When I click on "Configure Management Inteface" it shows that eth0 is connected. But when I ping a default gateway (which is 100% should be accessible) it fails. I used to another shell (Alt+F3) and logged as root. I also failed to ping. with both: ping -I eth0 192.168.1.1 and ping -I xenbr0 192.168.1.1 Be assured that: Cable works Ethernet adapter is 100% functional (prev OS was Ubuntu it was working) There is no firewall rule to deny anything. (everything is allowed) So the question is: What is a problem???

  Read the article

• Windows 2003 - RAS service - VPN client can only connect to server, not internal network

  - by Gk

  Here is my diagram http://imageshack.us/photo/my-images/263/vpnt.png/ Server has two NIC: One connect to Internet, one connect to internal network. RAS service is configured with static IP pool on the same subnet of internal network (10.10.0.x). The problem is when a client connect to server, client can connect to server(10.10.0.10), but cannot connect to another host locate in internal network (10.10.0.11) even cannot ping to 10.10.0.50. RAS configured with IP routing enabled, client connect with options: Use default gateway on remote network. I'm messed up and can not figure out what wrong. Please help me T_T. TIA, giobuon

  Read the article

• Remove a known network from Windows 8

  - by Edward Brey

  When Windows 8 detects a network based on the assigned IP address, netmask, default gateway, etc., it remembers the network along with the setting you give it as a public or private network. If you change the configuration of a network (e.g. reconfigure your router), Windows may determine you are on a new network and assign it a name of Network 2 or YourAPN 2. This less-than-friendly name shows up in many places in the Windows 8 UI, but unlike the good old days of Windows 7, there doesn't appear to be any UI to merge or delete these networks. What's the best way to merge or delete networks you don't want?

  Read the article

• How to elegantly selectively exclude FreeBSD network traffic from OpenVPN interface by port

  - by Polygonica

  inexperienced sysadmin here. I'm planning on running a net daemon inside a FreeBSD jail through OpenVPN, but want to be able to SSH directly into the jail and use the daemon's web interface daemon without going through the VPN. As I understand it, an OpenVPN tunnel is normally set up as a default virtual internet interface, and so incoming traffic will go out on the OpenVPN interface by default (which is problematic, as this incurs latency). I thought "well, obviously, since all of this traffic is leaving on a handful of ports, I'll just redirect those to the non-VPN gateway." I've tried to look for solutions, but almost all of them involve iptables instead of ipfw (which is default for FreeBSD) and solve slightly different problems. And alternate solutions like using multiple default routes to ensure that incoming traffic on any interface is always sent out on the same interface seem far-reaching and require deep knowledge of all tools involved. Is there an elegant way of ensuring that traffic leaving on specific ports exits on a specified non-default interface using ipfw?

  Read the article

• NSD reply from unexpected source

  - by Ximik

  I have server with NSD. There are MAIN_IP and ADD_IP. When I try to get IP of my site from server I have right output dig @localhost my_site.com But when I try to make this from my PC, I have dig @my_ns_server.com my_site.com ;; reply from unexpected source: MAIN_IP#53, expected ADD_IP#53 (ADD_IP is IP of my_ns_server.com) What should I do? UPD: My interfaces conf auto eth2 allow-hotplug eth2 iface eth2 inet static address xxx.xxx.xxx.234 netmask 255.255.255.252 network xxx.xxx.xxx.232 broadcast xxx.xxx.xxx.235 gateway xxx.xxx.xxx.233 dns-nameservers MY_ISP_IP dns-search MY_ISP_DOMAIN auto eth2:0 iface eth2:0 inet static address xxx.xxx.xxx.124 netmask 255.255.255.0 xxx.xxx.xxx is the same for all IPs

  Read the article

• How do I change the Admin password on a Ubee DVW3201B?

  - by Iszi

  I must admit that I feel rather foolish having to ask this. I recently switched ISPs, and the new one gave us a Ubee DVW3201B as our home gateway. I want to change the Administrator username/password from the defaults, but I've been having some difficulty. Every time, after I save the new username and password, I'm prompted to re-authenticate to the administration interface. It fails no matter what I try. I've tried using: New username / New password Default username / New password Default username / Default password None of the above works. This has happened twice now, with my only recourse after failure being to do a reset to factory defaults (press and hold the hard reset button for 10 seconds). Is there something I'm missing?

  Read the article

• How to route traffic from VM (Parallels) over an Open VPN connection on the host (OS X)

  - by withakay

  Scenario: I have a Mac running Lion that is connected to an OpenVPN server I have a Windows XP VM (running on parallels, but I don't think this is important) I want to be able to route traffic from the XP VM via the host Mac's OpenVPN connection so that I can log on to a domain. The remote network is 172.16.0.0/23 (255.255.254.0) Open VPN is configured to supply address in the 10.100.101.0/24 range and sets up the routing to 172.16.0.0 using the gateway 10.100.101.1/32 My local network is 192.16.1.0/24 NOTE: I do not want to install OpenVPN into the XP virtual machine as I would have to use a passwordless key in order for OpenVPN to connect before logon. Anyone got any ideas?

  Read the article

• Setting up WiFi extenders... is it possible to daisy-chain them?

  - by Bigbio2002

  At a location with limited cabling, I've had to set up WiFi signal extenders to cover the whole area. Here is a crude diagram... Internet - WiFi/Gateway - Extender 1 - Extender 2 | | PC (ethernet) WiFi device I was able to successfully daisy-chain three together, and I can access the internet from WiFi devices connected to the farthest extender. Is this a supported configuration? If not, what kind of issues can arise from it? The reason why I ask is that the PC keeps reporting IP address conflicts, and I'm wondering if that's caused because of the way this is configured. Additionally, I noticed that the extenders named their own SSID similar to the one they are connected to, but with a suffix. Would there be any issue in naming them all with the same SSID, to enable seamless roaming as you would with multiple standalone APs?

  Read the article

• Failover NIC with Windows 7 running Apache Server

  - by Benjamin Jones

  I have a Apache Server running on a Windows 7 Desktop for a internal website (Intranet). I am trying to figure out how I can make this system as failover safe as possible. One thing I want to do is use the 2nd NIC card that is currently disable. I only have one gateway address to my router. I do not have any computer running a Server O/S. If NIC1 crashes by chance(just humor me!), how could NIC2's IP take on the host name (I have mapped in host file) . I don't really care if the static IP of NIC2 changes seeing that the host name is the only thing I need. Could I add two IP's to the host file, with same host email and maybe create some script that will run IF NIC 1 fails? OR is there any failover software that will do this for me?

  Read the article

• ubuntu server in a vm, can't connect to internet

  - by jessh

  I'm attemtping to host my own development web server in a virtual box guest, Ubuntu Server. I would like this virtual machine to be accessible from not only my home network, but outside the LAN as well. As such, I've set up a static IP (so I can later forward ports to this static IP.) My virtual box settings have this vm only using one adapter -- in bridged mode. Here's what my /etc/network/interfaces looks like: iface eth0 inet static address 10.0.1.203 /*this is outside the DHCP range*/ netmask 255.255.255.0 gateway 10.0.1.1 network 10.0.1.0 broadcast 10.0.1.255 dns-nameservers: 8.8.8.8 8.8.8.4 Here's what the output of ifconfig looks like: https://dl.dropbox.com/u/2241201/locker/ubuntu.png My Host is a mac mini, running OS X 10.7. From within the guest, if I ping google.com: $ ping google.com # outputs 'ping: unknown host google.com' immediately Why am I unable to access the web?

  Read the article

• Accessing VMware Player across the network

  - by Tiffany Walker

  My network: 192.168.2.2 (computer) 255.255.255.0 (mask) 192.168.2.254 (gateway) The VMplayer is: 192.168.233.129 (ip) 255.255.255.0 (mask) 192.168.233.255(bcast) It's obvious the player can't be access from other systems because of the wrong network settings. However, I am not sure as to how to change that. Obviously I have to edit the ifcg-eth0 but I know I also need to edit it on the host system to make it accessably. Is this done from inside VMware Player? Or do I need to edit the network devices? The host box is Windows. Inside VMware is Linux.

  Read the article

• Internet connection sharing windows server 2008 R2

  - by This is it

  I have one windows server 2008 r2, and that server has 4 network interfaces (3 private, 1 internet connection). I would like to share internet connection with other 3 networks. Windows server firewall should make logs of data that is transfered. It should not be possible to connect directly to private networks from internet. How could I do it? Edit: I tried with NAT in RRAS, but it doesn't work. Here is the configuration: Server: IP private:192.168.0.1 IP public: xx.xx.xx.xx client IP:192.168.0.2 Default gateway: 192.168.0.1 Public and private interface added in NAT section of RRAS.

  Read the article

• Python: how to calculate data received and send between two ipaddresses and ports [closed]

  - by ramdaz

  I guess it's socket programming. But I have never done socket programming expect for running the tutorial examples while learning Python. I need some more ideas to implement this. What I specifically need is to run a monitoring program of a server which will poll or listen to traffic being exchange from different IPs across different popular ports. For example, how do I get data received and sent through port 80 of 192.168.1.10 and 192.168.1.1 ( which is the gateway). I checked out a number of ready made tools like MRTG, Bwmon, Ntop etc but since we are looking at doing some specific pattern studies, we need to do data capturing within the program. Idea is to monitor some popular ports and do a study of network traffic across some periods and compare them with some other data. We would like to figure a way to do all this with Python....

  Read the article

• Simple secured SFTP tunnel?

  - by babonk

  I'd like to setup an sftp tunnel so that I can connect to an IP-secured SFTP server through a gateway computer from anywhere, and download the files to anywhere. I was thinking of using a combination with netcat, having it listen to either WinSCP or PuTTY sFTP (doesn't matter which). Not sure how I would download the files to the connecting computer though. I would like the tunnel to be secured, preferably, with a username/password. I'm open to using alternative software but I'm looking for unintrusive, simple command line stuff because I don't want to install a lot on this computer. Thanks

  Read the article

• How can I automatically edit an email before auto-forwarding it?

  - by Miss Cellanie

  Is there a way to automatically edit emails before forwarding them? I'm getting email notifications from Foursquare that I want to send to my phone as text messages. I know how to send messages to my number using an email address (I'm in the US and use Verizon) but I don't know how to strip out any unnecessary formatting, like HTML, before the email gets sent. What I want: Ability to strip out HTML Ability to start forwarding at a specific part of the email based on a search (e.g., I might know that Foursquare starts their messages with "Hey hey!" and only want content after that phrase occurs) Ability to truncate at 160 characters Things I've tried: I'm not using Foursquare DM pings through Twitter because I have two Twitter accounts and Twitter only allows a phone to be linked to one account at a time. I'm not willing to change which account it's linked to. I tried to work around the Twitter limitation using Google Voice, but they don't support SMS short codes. I'll compromise on the features I want if I can find a free solution that doesn't require me to set up my own server. I do think this is computer related because it will happen on my computer, not on my phone. edit My current setup: Gmail in Firefox 3.0.15 on Windows XP. I use a netbook as my only personal computer. However, if the only way to accomplish this well is to set up my own mail server or something, I would still want to know that.

  Read the article

• Connecting guest OS to host os internet connection hyper-v

  - by autrevo

  Hyper-V internal switch and VM OS interfacing with Guest OS and IP Cofiguration When configuring hyper-v internal switch, Apart from physical lan adapter (say adapter 1), I see another LAN adapter (say adapter 2) added in host os. And we already have one virtual lan adapter in guest os, (say adapter 3) . adapter 1 is connected to internet with defaulty gateway say, 192.168.0.254 and uses class C IP. By con configuring adapter 2 and 3, I need to acheive two purpose - Access internet in guest os. seemlessly share files & folders between guest and host OS. Please, suggest, What is the best way to configure IP of these three adapters ?

  Read the article

• Troubles doing transparent proxy for virtual machines

  - by Dan H

  Hi iptables gurus. First here is the basic topology: Internet | Gateway | Workstation---eth0---virbr0 | +-----+-----+ | | | vm1 vm2 vm3 I need to test a traffic analyzer running on my workstation, listening on some port (say 8990) on eth0. The rule [I think] I want is "any packets leaving virbr0 going anywhere to port 80 must instead go to port 8990 on eth0". My software running on port 8990 does its own check of the NAT packet mangling to push the packets through after it inspects them. I've been banging my head on this, with different variants of: iptables -t nat -A PREROUTING -i virbr0 -p tcp --dport 80 -j DNAT \ --to 10.0.0.10:8990 And I've tried the more generic method of using the mangle table with --set-mark and ip rule add fwmark, but I'm not getting it. I guess what's confusing me is that everything runs on the same box. Thanks for any guidance.

  Read the article

• Network Monitoring Tool Recommendation

  - by user42801

  Hello, My company is looking for a monitoring app/tool that would allow us to capture and graph statistics on network performance. As a starting point, we would like to ping remote host(s) and gateway(s) from several of our servers, grab an average of the ping times from each of our servers to the remote host(s), and then graph it (preferably in a central location). Also, we would like to be able to graph the results for time frames as short as a week to as long as 6 months. It is reasonable to expect that we would ask more of the selected monitoring app/tool as we come up with other key network performance indicators in the future. So an app with great flexibility and features would be ideal. Upon first glance, Cacti looks like it might be a fit. Any other recommendations? Thanks in advance for any input.

  Read the article

• Can't use HTTPS with ServerXMLHTTP object

  - by Imraan

  I am supporting a Classic ASP application that connects to a payment gateway via HTTPS. Up until recently there have been no issues. A few days ago this broke without the code, IIS config or anything local changing. Its broken on at least 3 separate servers. The last run of Windows Updates was in late November, but bringing the servers' updates up date has not resolved the problem. A code snippet is below. Dim oHttp Dim strResult Set oHttp = CreateObject("MSXML2.ServerXMLHTTP") oHttp.setOption 2, 13056 oHttp.open "POST", SOAP_ENDPOINT, false oHttp.setRequestHeader "Content-Type", "application/soap+xml; charset=utf-8" oHttp.setRequestHeader "SOAPAction", SOAP_NS + "/" & SOAP_FUNCTION oHttp.send SOAP_REQUEST Below is a dump of the error object :- Number: -2147012852 Description: A certificate is required to complete client authentication Message: A certificate is required to complete client authentication I initially posted the question on Stackoverflow (http://stackoverflow.com/questions/9212985/cant-use-https-with-serverxmlhttp-object) thinking it was a code issue, but further investigation seems to point to a server issue.

  Read the article

• VPN Configuration

  - by Josh

  How can I allow incoming connections on a Windows 7 machine that is connected to VPN? I have some services listening on certain ports that I have forwarded from my router. When the VPN is disconnected, I can connect to these services from my internal network as well as from the Internet without issue. When I connect my VPN however, I am still able to access the ports from my internal network, but not remotely. I think I need a split tunnel setup, and there is an option in the VPN settings to Use Default Gateway on remote network. I want this option enabled so all my traffic is routed through the VPN, but I want incoming connections to be allowed on my internal network IP from the Internet. Is there some hybrid way to set this up with routing?

  Read the article

• Windows Server 2003 Router, Good approach [closed]

  - by jM2.me

  Possible Duplicate: Windows Server 2003 Router with PortForwarding Situation We have Verizon Fios 25/25 Internet Connection, Server acting as a router, and around 12 office computers. Task Portforward port 29000 from office computer. Problem Once I connected wan and lan cables I just had to set static lan ip (on server) and plug in switch with office computers into second nic. Then just right click on wan nic and select share internet connection. All office computers were assigned with an IP address 192.168.0.XXX and Gateway 192.168.0.1 (server). Now I have to open port and portfoward it from computer 192.168.0.190 (static ip, manual). Using this guide http://www.rosscode.com/blog/index.php?title=port_forwarding_in_windows_2003&more=1&c=1&tb=1&pb=1 I faced a problem. Before enabling "RRA" I had to unshare internet connection (wan interface) and was able to setup network. Now how do I setup a network within "RRA" and share internet with private network? Thank you much

  Read the article

• Windows 2008 R2 Not resolving IP's or domains

  - by InsaneAR

  I have two servers with Microsoft Windows Server 2008 R2 x64, and today I realized that one of them don't resolve IP's or domain names. If I ping the same machine IP, it respond, but if I ping an external IP (like 8.8.8.8 or any other) it does not work. The same with domain names. At Windows Event Viewer I'm having Warning 1014: Name resolution for the name timed out after none of the configured DNS servers responded THE SERVER HAS CONNECTIVITY, I'm connected remotely and the services and incoming traffic (like FTP, etc) are working OK. Things I've done & tested: Run Kaspersky Virus Removal 10 Restart/Turn off the DNS Client service Clean the hosts file Reboot the server Turn off the Windows Firewall (there's not another firewall) Quit or replace the current DNS servers I just can ping the same machine IP or the gateway! Can anybody help me?

  Read the article

• Reasonably Secure Alternative to Poptop PPTP Server for Ubuntu server and Windows clients?

  - by wag2639

  I have a poptp server running on a old Fedora server but I'm upgrading to an Ubuntu 10.04 server. I was wondering if there are any good, reasonable secure alternatives to poptop that in can install on our new Ubuntu server as a way to get VPN access from Windows clients (XP and 7) to get remote access into our Intranet. We only use the VPN to access files located inside the network; we do not need to use it as a proxy/gateway. I've looked into openVPN but it seemed way too complicated and I would prefer something built into Windows. A Windows 7 only solution is OK.

  Read the article

• Server IP must be a LAN IP (Port Forwarding Netgear)

  - by rphello101

  I'm trying to set up a server (Apache) on my computer (fairly new to it). As I understand it, for it to be accessible to other computers, I need to forward port 80. When I try to forward the port though, I get the error: Server IP must be a LAN IP. I noticed in ipconfig that my default gateway is different than my wireless router. My computer is not hardwired, not on WiFi. Furthermore, I do not, at this point, have a static IP. I read that it should still work with a dynamic IP until it changes. Any ideas on what I can do?

  Read the article

< Previous Page | 75 76 77 78 79 80 81 82 83 84 85 86  | Next Page >