Search Results

Search found 2042 results on 82 pages for 'booting'.

Page 8/82 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

  • kernel 2.6.36 not booting

    - by Saumitra
    Hi, I m a newbie to kernel programming. I am trying to boot the kernel 2.6.36 on my ECG machine.It was working perfectly on 2.6.33.2. It is getting stuck on this step: ## Booting kernel from Legacy Image at 81000000 ... Image Name: Created: 2010-12-27 5:55:56 UTC Image Type: MIPS Linux Kernel Image (gzip compressed) Data Size: 1974278 Bytes = 1.9 MB Load Address: 80100000 Entry Point: 80104730 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... After this the system either resets or it hangs. I have also checked the configuration & set it properly.Please let me know.

    Read the article

  • Pc not booting, no video output, hard drive noises

    - by bullettime
    My computer suddenly stopped booting up. I just came back from a week long trip, and it was working fine before I left. When I power up the computer now, it seems to power up just fine (leds on, fans working), but then there's no output on the screen at all, and there's a noise that seems to be coming from the HD, like it is trying to read something. After the noise starts, it does 6 cycles and then stops. I'm not sure but I don't think it did this noise when the pc was still working. I tried using the onboard video card instead but it made no difference. What could be wrong with my computer?

    Read the article

  • Booting drops to EFI shell but boots normally if exit'ed

    - by wittybear
    (first post here... I'm normally on stackoverflow) I'm booting an Intel ME 5788 board which uses EFI (a replacement for BIOS). On boot it drops out to the EFI Shell and the 'map' shows the drive as a blockdevice but there is no filesystem device mapped. If I just type 'exit' it boots normally to windows 7 and the configuration (using bcdedit.exe) looks fine. I'm confused - surely if its not been able to map the blockdevice as a filesystem device it should not boot? I would like to be able to get the boot to proceed without my interaction - does anyone know how to do it? (Also there is no Boot Manager options available in the shell, i.e. autoboot, bcfg etc)

    Read the article

  • Problem booting virtual machine after converting VMDK to VHD

    - by vg1890
    I used the VMWare VCenter Converter Standalone Client to convert a physical drive on my old PC to a virtual drive. The conversion worked fine and I ended up with a valid VMDK file. Next, I wanted to convert the VMDK to a VHD for use with Microsoft Virtual PC, since that's what I use on my new box. I used WinImage for the conversion and that worked fine, too. I can access the files from the virtual drive through WinImage. However, when I create a new virtual machine using Virtual PC and add the existing VHD file, the machine doesn't boot. The initial boot screen flashes with the amount of RAM and then the screen goes black. If I turn off the VM and reboot in safe mode I can see the drivers being loaded until eventually it gets to crcdisk.sys and hangs indefinitely. Any ideas how to fix this? I'm not opposed to starting over from scratch if there's another method to turn my physical machine into a Virtual PC VM. Thanks! EDIT - I should add that the virtual drive is a system boot drive and not a secondary drive. EDIT - I tried booting from the install CD and doing a repair. The result was that the system could not be repaired due to a "driver error."

    Read the article

  • Booting VM Directly from iSCSI (or FC) in Hyper-V R2

    - by tony roth
    I have a server that san boots that I want to p2v. I have many options disk2vhd, scvmm etc but I was thinking about cloning the lun (flexclone, netapp) presenting it to my hyper-v r2 server. Within the hv manager do a create new disk then have it copy the cloned lun to a vhd file. Then do the bcdedit\bootsect stuff to it. Should work right? I'm also curious if anybodys booting vhd's that are on bootable luns? I've booted native vhd's just fine was just curious about the running them off a bootable lun. I think that this has quite a few advantages like instant p2v etc.. any thoughts on this? hmm dang as I was typing this I realized that I should not use the hv manager new disk copy routine, I should just disk2vhd the mounted lun. This has advantages in that it should be a lot faster!! discovered that disk2vhd may be flaky, crashed the first time I ran it! thanks

    Read the article

  • Passenger not booting Rails App

    - by firecall
    I'm at the end of ability, so time to ask for help. My hosting company are moving me to a new server. I've got my own VPS. It's a fresh CentOS 5 install with Plesk 9.5.2 Essentially Passenger just doesnt seem to be booting the Rails app. It's like it doesnt see it's a Rails app to be booted. I've got Rails 3.0 install with Ruby 1.9.2 built from source. I can run Bundle Install and that works. I've currently got Passenger 3 RC1 installed as per here, but have tried v2 as well. My conf/vhost.conf file looks like this: DocumentRoot /var/www/vhosts/foosite.com.au/httpdocs/public/ RackEnv development #Options Indexes I've got a /etc/httpd/conf.d/passenger.conf file which looks like this: LoadModule passenger_module /usr/local/lib/ruby/gems/1.9.1/gems/passenger-3.0.0.pre4/ext/apache2/mod_passenger.so PassengerRoot /usr/local/lib/ruby/gems/1.9.1/gems/passenger-3.0.0.pre4 PassengerRuby /usr/local/bin/ruby PassengerLogLevel 2 and all I get is a 403 forbidden or the directory listing if I enable Indexes. I dont know what else to do! Yikes. There's nothing in the Apache error log that I can see. The new server admin isnt much help as I think he's a bit junior and says he doesnt know about Rails... sigh :/ I'm a programmer and server admin isnt my bag :(

    Read the article

  • Dual booting Linux/Win7, Grub refuses to load Win7

    - by JohnB
    Decided to give Linux Mint a try (Ubuntu's interface annoys me), so I installed it with the intention of dual booting with Windows 7. Installation went fine, but now I can only boot into Linux Mint. Grub lists two Windows 7 menu options, but selecting either of them causes an "unknown file system" error and dumps me into a Grub recovery prompt. There, I have to manually reset the root and prefix options, as they reset hd0,msdos6 when they should be hd0,msdos5. I ran Boot Repair twice, once to fix grub errors, once to rebuild the MBR, but it didn't fix anything. Here is the log: http://paste.ubuntu.com/1029675/ fdisk output: Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1486249145 743021149 7 HPFS/NTFS/exFAT /dev/sda3 1486249982 1953523711 233636865 5 Extended /dev/sda5 1486249984 1945141247 229445632 83 Linux /dev/sda6 1945143296 1953523711 4190208 82 Linux swap / Solaris grub.cfg: ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 86184D18184D091F chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 56D84F84D84F60FB chainloader +1 } ### END /etc/grub.d/30_os-prober ### I have found a few similar troubleshooting guides so far, but so far no amount of updating/configuring Grub has been successful. Last resort is, I suppose, use the W7 recovery disc and start over. Thanks in advance! Linux Mint 13 Maya, 64-bit Windows 7 Home Edition, 64-bit

    Read the article

  • Vista gets stuck in an endless loop while booting

    - by Mason Wheeler
    I put my laptop to sleep last night, and when I woke up this morning... it didn't. So I tried to reboot, and everything went fine until it got to the Vista splash screen, where it's supposed to display the logon. Here, it hits an endless loop: Display the cursor with the blue spinny thing that replaced the hourglass, for 5-10 seconds Display "Please wait..." for about half a second Screen flashes to black, then quickly back to the Vista splash screen Goto step 1 The whole time, my hard LED is on almost non-stop. I can boot into Safe Mode... sometimes. Sometimes it'll load all the drivers, then sit there for about 10 minutes, spinning the hard drive non-stop, then reboot with no warning. I tried booting to Last Known Good Configuration. Didn't fix anything. When I've managed to get into Safe Mode, I tried running CHKDSK. Didn't fix anything. I tried running System Restore to each of my last two restore points. Didn't fix anything either time. I ran a virus scan. Didn't find anything. I tried calling the manufacturer (Alienware), only to discover that my warranty expired last freaking week and now I can't get it fixed without paying exorbitant sums of money. I'm about at my wits' end here. Has anyone seen this problem before? Does anyone know how to fix it? Does anyone know a solution that does not involve reinstalling the OS and losing an entire year's worth of program installations, Windows Updates and configuring and tweaking things until it's working just like I want it to?

    Read the article

  • Passenger not booting Rails App

    - by firecall
    I'm at the end of ability, so time to ask for help. My hosting company are moving me to a new server. I've got my own VPS. It's a fresh CentOS 5 install with Plesk 9.5.2 Essentially Passenger just doesnt seem to be booting the Rails app. It's like it doesnt see it's a Rails app to be booted. I've got Rails 3.0 install with Ruby 1.9.2 built from source. I can run Bundle Install and that works. I've currently got Passenger 3 RC1 installed as per here, but have tried v2 as well. My conf/vhost.conf file looks like this: DocumentRoot /var/www/vhosts/foosite.com.au/httpdocs/public/ RackEnv development #Options Indexes I've got a /etc/httpd/conf.d/passenger.conf file which looks like this: LoadModule passenger_module /usr/local/lib/ruby/gems/1.9.1/gems/passenger-3.0.0.pre4/ext/apache2/mod_passenger.so PassengerRoot /usr/local/lib/ruby/gems/1.9.1/gems/passenger-3.0.0.pre4 PassengerRuby /usr/local/bin/ruby PassengerLogLevel 2 and all I get is a 403 forbidden or the directory listing if I enable Indexes. I dont know what else to do! Yikes. There's nothing in the Apache error log that I can see. The new server admin isnt much help as I think he's a bit junior and says he doesnt know about Rails... sigh :/ I'm a programmer and server admin isnt my bag :(

    Read the article

  • Booting Debian5 (Lenny) on 2.6.16 Kernel

    - by bk
    Due to a proprietary kernel module that I don't have the source to and is very picky about what kernel versions it will load into (even with modprobe --f), I find myself in need of running a 2.6.16.XX kernel on my Debian5 machine. The machine boots fine with the 2.6.26-2 stock kernel, and I have successfully build and booted 2.6.26 and 2.6.31 based kernels by making a .deb and the ndoing dpkg -i. However, when I do the same approach for 2.6.16, the kernel hangs at boot. I'm testing this in a VMWare image, so I don't think its an issue of newer hardware not supported by the older kernel. For a working kernel, at boot I get: Uncompressing Linux.. OK booting the kernel Loading, please wait... mdadm: No devices listed in the conf file were found kinit name_to_dev_t /dev/hda5 (dev5,3) ... With 2.6.16.60, I never get the kinit message. It hangs after the mdadm line. There are no mdadm arrays on this machine, so I doubt its an issue inside the mdadm stuff, which is supposed to just error out as it does in the 2.6.26 case above, but for some reason I'm getting stuck getting into kinit. I've been banging my head against this wall so I'm very open to suggestions on how to go about troubleshooting this.

    Read the article

  • Supermicro X8SIL-F with Enermax Modu82+ 625W PSU booting issue

    - by Richard Whitman
    I am assembling a custom PC. The configuration is below: Motherboard: Supermicro X8SIL-F Processor: Intel Xeon 3430 Power Supply: Enermax Modu82+ 625W. Memory: Kingston KVR1333D3LQ8R9S/8GEC 8GBx1 installed in DimmA1 This power switch: Frozen CPU switch When I turn on the PSU, the motherboard tries to start itself before I even push the power switch. The following happens: The CPU fan rotates like once or twice, and then stops. After 1-2 seconds, the CPU fan tries to rotate again and stops after about one or two rotations. Finally, after another 1-2 seconds, it again starts and this time it rotates for about 3-4 seconds before stopping. If I pull out the Power switch, and turn on the PSU, again the MB turns on itself and the following happens: The CPU fan rotates like once or twice, and then stops. After 1-2 seconds, the CPU fan tries to rotate again and stops after about one or two rotations. Finally, after another 1-2 seconds, it again starts and the system boots properly I am sure there is nothing wrong with any of the components, because I have two sets of identical components (2 MBs, 2 CPUs, 2 PSUs, 2 switches and so on). And both of the systems show the same symptoms. Why is the MB booting up by itself? Why does it fail to boot when the Power Switch is installed? Is something wrong with the type of Power Switch I am using? PS: the power switch is installed correctly, I have double checked the MB manual to make sure its connecting the right pins.

    Read the article

  • virtual machines, dual booting and data disks on SSD

    - by stevemarvell
    This is in planning, so if I've got the strategy wrong, please let me know. There are multiple questions here, but I think they all degenerate to the same answers. The hardware is a laptop with a single SSD. I'm trying to not lose the performance of the SSD. I plan a native dual booting Windows (plus cygwin) and Linux machine which is my BYOD and represents the development environment. I keep the codebase on a shared partition (though sometimes this is an external thunderbolt SSD) which can be natively "mounted" by whichever OS is in operation. I boot into one or the other environments depending on the task in hand. Sometime I have to develop with windows tools, but generally, Linux is my preferred development environment. It would be ideal if I could VM the other OS and run either in either. I'm going to assume, because I've not found a sensible VM based solution, that I have get samba involved to share the code partition between VMs. Is this going to blow my SSD performance in the VM? The client also supplies me with a VM for the target environment, usually linux. This is not often suited to development and is used for testing only. I normally keep two copies of this, one as a sandbox and one which I deploy to using the client's preferred method. I keep these VM snapshots on the shared partition. The latter is interacted with over the network and so has no disk sharing requirements. However, it would be useful for the sandbox to be able to "mount" the code base from the natively running OS. Is this samba or nfs again, depending on the native OS? Am I missing a trick which allows this to all work smoothly with all four environments running at once without loosing the SSD performance?

    Read the article

  • Booting Ubuntu as VM with KVM on Ubuntu 12.04

    - by CrazycodeMonkey
    I am trying to boot my very first VM using KVM. I have Ubuntu 12.04 installed, i made sure the BIOS had the right virtualization flag enabled for intel processor by running kvm-ok. I have researched this on google and all the instructions that i have found so far are outdated. for e.g. most instructions talk about booting a virtual machine with the following commands qemu-img create -f qcow2 foo.img 100G --- create a virtual disk for your VM kvm --name foo -m 1024 -hda foo.img -cdrom whatever.iso -boot d -- This runs kvm. This command line is incomplete. First you need to be root to run this. Second- it is missing option for the video device. When you run this command you get the following error "Could not initialize SDL(No available video device) - exiting" Googled this error and looked it up on stackover flow http://stackoverflow.com/questions/4841908/sdl-init-failure-reason-is-no-available-video-device The answer provided here does not work on Ubuntu 12.04 Googled this problem further and found out that i need to specify a video device so I finally ran the following command sudo kvm --name mymachine -m 8096 -hda myimage.img --cdrom ubuntu.iso -boot d -vga cirruss -k en-us -vmc :0 This was after I had created the myimage.img image on the drive. Now this command does not give me an error but it just hangs. Does anyone have clear instructions on how to run a VM using KVM on Ubuntu?

    Read the article

  • Booting an Asus EeePC from a LiveCD USB stick

    - by Bryan
    I have two identical Asus EeePC netbooks that are both installed with Ubuntu. One of them was sitting on the closet shelf and the battery went completely dead. When I charged the battery and tried to boot the it, I got the "No init found" error. In trying to follow the suggested way to fix it posted here, I used the Startup Disk Creator on my Ubuntu 11.10 desktop machine to create a USB stick with a bootable Ubuntu 11.10 live CD on it (the netbook doesn't have a CD drive). I plugged the USB stick into the netbook with the init issues, went into the BIOS and selected the USB stick as the 1st choice to boot from, and did a hard restart. It then just stuck at the flashing underscore. Not knowing why it wasn't working, I tried booting my working netbook from the USB stick. When I got into the BIOS on the working netbook, I noticed the description in the boot order section for the USB device was different. On the non-working netbook, the description was SWISSBIT (the name of the USB stick) but on the working netbook it was just "Rem. Drive". I also noticed on the working netbook there was an additional option under the bootable order section that allowed me to choose which hard drive to boot from. This section showed two hard drives, one of them being my USB stick. So, rather than changing the device boot order, I selected the USB stick as the hard drive to boot from first and it worked like a champ - I was able to boot into the LiveCD on the USB stick. Seems to me the working netbook is seeing the LiveCD USB stick as a hard drive, where-as the non-working netbook is seeing it as a plain ol' USB stick. The BIOS is the exact same version on both netbooks... any idea why it works on one and not on the other?

    Read the article

  • DVI output only working on Windows, not during booting or on Linux

    - by Mononofu
    So yesterday I booted my laptop up and the external monitor I have it connected to just stayed black. At first, I thought the problem would go away when Ubuntu was loaded, but it didn't. I tried to reboot a few times, to no avail. Then I decided to give Windows 7 a try, and suddenly (at the login-screen), my external monitor turned on and worked like normal. I have connected the monitor via DVI, and this only seems to work with Windows now. I don't even get a signal in my BIOS! Mind you, everything was working fine before that, and I didn't change a single thing. I then tried to connect the monitor via VGA (from my DVI jack, which can output VGA using an adaptor), and it worked again. However, 1920x1200 using VGA looks like crap - black print on white background is basically illegible. Do you have any ideas how to fix this peculiar problem? I only use windows for gaming, so it's no real help that it still works normally. Please also excuse any spelling mistakes, I am practically typing this blindly. Edit: I only have one graphics card in my laptop, and I can't select anything related to that in my BIOS. In fact, I can pretty much do almost nothing there. My laptop is a Nexoc Osiris E703, graphics gard is a GeForce Go 7900 GTX. As I mentioned before, DVI output during booting and on Ubuntu was working fine for years before yesterday!

    Read the article

  • DVI output _only_ working on Windows, not during booting or on Linux

    - by Mononofu
    So yesterday I booted my laptop up and the external monitor I have it connected to just stayed black. At first, I thought the problem would go away when Ubuntu was loaded, but it didn't. I tried to reboot a few times, to no avail. Then I decided to give Windows 7 a try, and suddenly (at the login-screen), my external monitor turned on and worked like normal. I have connected the monitor via DVI, and this only seems to work with Windows now. I don't even get a signal in my BIOS! Mind you, everything was working fine before that, and I didn't change a single thing. I then tried to connect the monitor via VGA (from my DVI jack, which can output VGA using an adaptor), and it worked again. However, 1920x1200 using VGA looks like crap - black print on white background is basically illegible. Do you have any ideas how to fix this peculiar problem? I only use windows for gaming, so it's no real help that it still works normally. Please also excuse any spelling mistakes, I am practically typing this blindly. Edit: I only have one graphics card in my laptop, and I can't select anything related to that in my BIOS. In fact, I can pretty much do almost nothing there. My laptop is a Nexoc Osiris E703, graphics gard is a GeForce Go 7900 GTX. As I mentioned before, DVI output during booting and on Ubuntu was working fine for years before yesterday!

    Read the article

  • Windows 7 not booting up and stuck at startup repair

    - by mikimr
    I've been having issues with Windows 7 Home Premium on a Lenovo laptop. At first, it would not start up normally at all. I started it in Safe Mode, where I disabled all non-MS services and tried again to no avail. It then goes into Startup repair where it failed several times. I tried copying the original registry settings, still the same. I resorted to booting with an Ubuntu DVD, where I ran the boot-repair, where it is supposed to correct the Windows boot. No luck. I used Win7 DVD to start up from there, where I had the option to install or repair. I chose the repair, got into command prompt, ran chkdsk /i /r, where it found 3 unreadable segments, went through the 2nd step without issues, and the 3rd step completed with some errors (can't recall the exact errors). When I restarted the machine, it went to straight to the Stratup Repair, indicating "Attempting repairs... Repairing dis errors. This might take over an hour to complete." It's been like this for nearly 15 hours. When I try to cancel or close the Startup Repair window, I get a message "The current repair operation cannot be cancelled." Should I let it run or force shut the machine? If force shut, how can I resolve this problem? Thanks.

    Read the article

  • Booting Windows from different partition than system

    - by szamil
    I have bought an SSD disk, but my laptop (Dell Precision M6300) refuse to use it as a target disk for windows (AHCPI on/off, BIOS up-to-date). I can't exchange the disk unfortunately... But fortunately, I've managed to install windows using USB disk case. The problem is, that when I put that disk as my internal drive it can't boot. (Disk read error, Three Finger Salute ... ) So I tried with Linux (openSUSE), I manage to install it as well, but when I tried to boot GRUB from internal drive I get errors again. (Should I try GRUB2?) I figured out that I can boot into that internal hard drive's openSUSE system using small USB drive with GRUB, kernel and image on it. So, I just run GRUB from USB drive, it loads necessary stuff from the USB drive and then continues from the internal drive. I want to do the same with Windows. But GRUB (rootnoverify and chainloader +1) does not boot my windows on internal drive. The question: is there any chance to copy the critical windows' boot files into the USB drive, to make it possible to boot from that USB drive, but continue booting from internal (different in general) drive? The USB drive would became a system hardware key! ;-) Disk: Plextor M5S 128GB Sata III, laptop has Sata II, but it's compatible anyway, right?

    Read the article

  • Nvidia 9800GT randomly prevents computer from booting

    - by Blender
    My computer has been running Windows and Linux perfectly fine with my 9800GT for the past year or so, but today it refused to boot. When I press the power button, this is what happens: Power button flashes once. Fans whir. Graphics card makes clicking noise. Computer reboots. Go back to 1. The cycle just keeps going, and I have to yank the cord to make the computer stop. After about 30 attempts at booting it, the computer powers on and everything works. I'm pretty sure that the graphics card isn't malfunctioning, as I've been GPU computing on it for a while now without any hiccups. But the strange thing is, the computer boots perfectly fine in only 5 boots if I remove the card. The computer is a HP Pavilion a6028x Desktop PC: Processor: AMD Athlon 64 X2 (W) 4600+ 2.4 GHz (AM2 socket) Motherboard: ECS MCP61PM-HM (Nettle 1) RAM: 3GB DDR2 (two different brands) More specs here Does anybody know what could be the problem? Any help or information would be greatly appreciated!

    Read the article

  • Role of MBR in the booting process

    - by pg4421
    I am new to stack overflow. So please correct me if my question seems irrelevant or stupid. I read here in Booting Process : The job of the primary boot loader is to find and load the secondary boot loader (stage 2). It does this by looking through the partition table for an active partition. When it finds an active partition, it scans the remaining partitions in the table to ensure that they're all inactive. When this is verified, the active partition's boot record is read from the device into RAM and executed. The question is that I am having a Hard disk which has two Operating System images windows and ubuntu and hence both partitions in which they reside are active. Then why do we have only one active partition always? (I know that active partition is one of the primary partition but then why we are giving special reference to one primary partition? ) I am confused a bit. Please solve my query. Thank you so much.

    Read the article

  • Simple VM That allows booting from folder or disk

    - by None
    I was wondering if there was a very simple and free virtual machine that would allow you to boot from a folder or disk image that couldn't damage my hard disk. I am using a MacBook and am looking into operating system programming. I found a tutorial on the internet that looked promising (http://www.viralpatel.net/taj/tutorial/hello_world_bootloader.php). I want to try this but using a VM instead of actually booting from a disk. If I made a folder or disk image containing the boot.bin file and wanted to try the OS I made (while booting from a folder or disk image, not a disk), is there a VM that would let me do it? I have no previous experience with virtual machines. I also want to be sure my hard disk would not be damaged.

    Read the article

  • How to create persistent static route on Mac OS X 10.6?

    - by kopobamypa
    I need to add static route on MAC OS. I found good description here Permanent Static Route Mac Os X 10.4.0 and followed the Roark Holz's (roarkh) solution. Now my problem: sometimes this solution works, sometimes does not. When it doesn't work I see these messages after boot in the Console Messages log: 06.05.10 9:34:13 com.apple.launchd[1] *** launchd[1] has started up. *** 06.05.10 9:34:46 com.apple.SystemStarter[30] Adding Static Route to 10.152 06.05.10 9:34:46 com.apple.SystemStarter[30] route: writing to routing socket: Network is unreachable 06.05.10 9:34:46 com.apple.SystemStarter[30] add net 10.152.0.0: gateway 192.168.1.234: Network is unreachable I want to know what is going on. How this kind of problem can be troubleshooted?

    Read the article

  • Why does my motherboard go through an endless reboot cycle when 8 GB of memory is attempted vs 6 GB?

    - by nizm0
    I never got an answer in my googling to this about a year ago and have an extra stick of memory I'd like to be able to use. When is inserted the computer starts, and then reboots immediately in an endless reboot cycle. As soon as the 4th stick is removed, the computer works fine. Right now I have 6 GB of my 8 GB installed. Is there a solution that I am missing to enabling this motherboard to actually boot up with all 8 GB (it supports it). Right now it won't even boot up to BIOS with the 4 sticks... only 3? Memory: 1 x G.SKILL 4 GB (2 x 2 GB) 240-Pin DDR2 SDRAM DDR2 1100 (PC2 8800) Dual Channel Kit Desktop Memory Model F2-8800CL5D-4GBPI - Retail (URL: ) http://www.newegg.com/Product/Product.aspx?Item=N82E16820231194 Motherboard: 1 x GIGABYTE GA-EP45-UD3R LGA 775 Intel P45 ATX Intel Motherboard - Retail ( URL: )http://www.newegg.com/Product/Product.aspx?Item=N82E16813128359

    Read the article

  • Asus P5Q doesn't post at all

    - by Sebi
    I had a very strange incident this evening. I was watching TV on the computer and suddenly the sound stutter. Some seconds later, the screen went black. First I thought ok some error, don't worry. Since the computer didn't react on any input from the mouse or keyboard, I shutted it down by pressing the power button. I tried to reboot but the monitor rest black. All the fans were running, the MB didn't made a beep and the leds are all green as they have to be. The HDD is running too, also the monitor is on. But nothing happens, not even a single message on the screen, just black. Here are the things I already tried with no success: tried to boot with 1 of two rams (each tested alone) turned off all power (pull th plug) for 10 minutes tested the graphic card with another pc. there it worked. tested the RAM with another pc. there it worked. Any hints what to do next?

    Read the article

  • mini linux to use dd and access HD and/or USB

    - by acidzombie24
    I was thinking about something. I want to install a 7gb partition and store 2 compress disk image and install linux to it. I want it to be light. What i would like to do is hide the grub loader (or anything) and if i want to reformat my PC press a certain key on startup. Which will then load the linux OS and then i can use dd to restore the partition i want I plan to use windows XP and windows 7 as my main OS and virtualize anything else i need (vista, dummy XP for testing, multiple linux distos, etc). Bonus points if you can tell me how to hide the partition in windows so XP and 7 cant touch it

    Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >