Search Results

Search found 715 results on 29 pages for 'dennis allen'.

Page 8/29 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

  • IIS7.5 is only resolving to the Default Web Site

    - by Dennis Burnham
    I am able to access only the Default Web Site on a Windows 2008 R2 Server which is running IIS 7.5 The Default Web Site's binding is to "All Unassigned", same way as I have done it on a different machine running IIS6 under Windows 2003 Server. The bindings of the desired Web Site have the IP address of the server and the correct home directory. Regardless what I do, the only page content I can see is the default index page in the wwwroot directory which is the Default Web Site. What must I do to deliver the correct content from the Web Sites that are configured in IIS7.5?

    Read the article

  • How to step down voltage from 208V to 110V

    - by Eric Dennis
    I have some racks that will be fed by 208V/20A circuits. These circuits will be conditioned and battery-backed by the facility in which these racks will live. 99% of the devices in the rack will be able to support 208V input, so I plan to use these PDUs. However, there may be one or two odd devices that will need 110V input. I know that I can use a step-down transformer to provide 110V for these devices, but that seems like overkill for such a small number of devices, plus I don't want to pay extra for the UPS functionality since my power will already be battery-backed. Any suggestions for something I can use for these one-off 110V devices?

    Read the article

  • Ubuntu 11.04 fresh install - "Input signal out of range" or "Mode not supported..."

    - by Dennis
    I recently installed Ubuntu 11.04 using a CD .iso. Installation went fine. Upon completion I rebooted and after a second or two I got a black screen with the message "Input signal out of range". And there it sits... Read a few things about how this could be related to screen resolution, refresh rate, etc. For the heck of it I tried a different monitor. The result is the same but the message provides some clues - "Mode not supported - H:92.7kHz, V:58.3Hz" (the latter is Hz; not kHz). So my thought is that I should probably be able to use the 11.04 install disc to "Try out Ubuntu", find and edit some file that was created by the install with the correct values. Problem is, I am not too sure what I am supposed to edit. Looked at the xorg.conf file but this is so minimal at this point I am not sure it is where I want to go. By the way, the monitor is an I-Inc ix191a. Anyone have any ideas on how to get around this?

    Read the article

  • How can I make my laptop use a phone as a wi-fi adapter?

    - by Dennis Williamson
    I have an HP Pavilion dv6400 series laptop with an NVidea chipset which is the subject of a class action lawsuit. The symptom (PDF) that I'm experiencing is that the system fails to recognize that there is a wireless adapter installed. It doesn't appear in Device Manager. In this question, I ask if there's a way to work around this problem. As an alternative, I'd like to see if there's a way to use an old Windows Mobile 5 phone that does not have cellular service (voice or data) as a Wi-Fi adapter. How can this be accomplished? The system is running Windows Vista Home and has the latest BIOS (F42) and Windows updates and drivers.

    Read the article

  • Not getting my normal internet speed but my other computers can?

    - by Dennis
    I have Comcast Xfinity and I cannot reach anywhere near my promised speed. My family desktop which is hardwired into the router reaches to 60Mbps and so do my parents computers and my brothers. I cannot seem to get anywhere close to it, I know with being wireless I won't reach it, but I should at least get somewhere close. I can only pull 6Mbps and thats terrible for what I should be receiving. Any clue what could be wrong here? Edit: I have 100% signal and I'm not behind any walls

    Read the article

  • How to set up an extended desktop on dual monitors in Kubuntu 9.04?

    - by Dennis
    I'm using my laptop (Lenovo Thinkpad T60) and I have a secondary monitor (which has a different resolution than my laptop screen) connected by VGA. Kubuntu recognizes the monitor and it functions but my desktop is mirrored (i.e. an identical copy) across the dual monitors (which is useless to me). How can I extend my desktop across both monitors? P.S. I googled it but the solutions I found weren't standard, they were hardware specific and you had to manually change system files, etc.. There must be an easier way. edit: Here is a snapshot of the settings.

    Read the article

  • Why is CS never a topic of conversation of the layman? [closed]

    - by hydroparadise
    Granted, every profession has it's technicalities. If you are an MD, you better know the anatomy of the human body, and if you are astronomer, you better know your calculus. Yet, you don't have to know these more advance topics to know that smoking might give you lung cancer because of carcinogens or the moon revolves around the earth because of gravity (thank you Discovery Channel). There's sort of a common knowledge (at least in more developed countries) of these more advanced topics. With that said, why are things like recursive descent parsing, BNF, or Turing machines hardly ever mentioned outsided 3000 or 4000 level classes in a university setting or between colleagues? Even back in my days before college in my pursuit of knowledge on how computers work, these very important topics (IMHO) never seem to get the light of day. Many different sources and sites go into "What is a processor?" or "What is RAM?", or "What is an OS?". You might get lucky and discover something about programming languages and how they play a role in how applications are created, but nothing about the tools for creating the language itself. To extend this idea, Dennis Ritchie died shortly after Steve Jobs, yet Dennis Ritchie got very little press compared to Steve Jobs. So, the heart of my question: Does the public in general not care to hear about computer science topics that make the technology in their lives work, or does the computer science community not lend itself to the general public to close the knowledge gap? Am I wrong to think the general public has the same thirst for knowledge on how things work as I do? Please consider the question carefully before answering or vote closing please.

    Read the article

  • change USB vendor id / product id

    - by Hugh Allen
    Under Windows, is there any easy way to change or forge the vendor and product id of a USB device? Say for example there's a useful program which expects a particular (but ubiquitous and generic) device but you think it will probably work with the device that you actually have. I've done lots of Googling and apparently you can do it under Linux so it occurs to me to run Windows in a VM under Linux, but that would be a bit inconvenient.

    Read the article

  • Can't delete C:\Config.Msi\75ce84f.rbf

    - by Hugh Allen
    I can't delete C:\Config.Msi\75ce84f.rbf It's not causing any problems but it's a mystery I'd like to solve, preferably before the next reboot because it's scheduled for deletion then (see pendmoves). it's not readonly, system or hidden it's not in use by another process (according to Process Explorer) the NT security permissions aren't the problem either - I am the owner and have Full Control ; as a double-check, the Effective Permissions tab shows that I have permission to delete. Yet trying to delete the file gives "Access is Denied" from both Explorer and cmd. I can however rename it or move it to another folder on the same drive. I can also read it and Virustotal says it's clean which is what I would expect (it's just a Windows Installer temp file - a copy of some DLL I think). The relevant line from Process Monitor is: 6:52:14.3726983 PM 112 Explorer.EXE SetDispositionInformationFile C:\Config.Msi\75ce84f.rbf CANNOT DELETE Delete: True Write 1232 Background: I'm using XP SP2. I recently repaired my Adobe Reader installation to make it the default browser plugin again instead of Foxit. (there seems to be no UI to do it otherwise?) So the installer did its thing and then asked to reboot. As is my habit when rebooting is inconvenient I declined the offer and ran pendmoves to find out what files the installer had scheduled to move / delete. It wanted to delete two files with .rbf extension (rollback files) located in C:\Config.msi\. (this applies to both even though I've been speaking about one). So I tried to delete them manually and couldn't. Does anyone have any ideas what could be preventing deletion? (and I don't think it's malware even though I'm not running AV at the moment)

    Read the article

  • Migrating from DD-WRT to Tomato

    - by Collin Allen
    Is it possible to switch to the latest version of Tomato on a router that's already running DD-WRT? Using the default Linksys firmware on my WRT54GL v1.1, I had to upload a micro version of DD-WRT first. I imagine that, since I'm now running third-party firmware, I won't have to do that again to make the switch, but I thought I should check so as not to brick it. This router is taking a back seat to a new AirPort Extreme (for the 'n' capability), but I still want to have the soon-to-be-Tomato device sit between the AirPort Extreme and my modem for the superior traffic graphing.

    Read the article

  • How do I install an HP home-use printer on Windows Home Server (Windows Server 2003)

    - by Rob Allen
    I have an HP DeskJet F4210 printer that I would like to share on my network via Windows Home Server. Unfortunately, the driver installation checks for supported OS's, detects Home Server as Windows Server 2003 and exits. The driver install supports WinXP, W2k, Vista, and Win98SE. In theory, drivers for XP or Windows 2000 should work fine with Home Server. When using the "Install Printer" tool in Home Server I am only able to select .inf files (there are serveral on the install media) but the driver folders for XP and 2000 have .sys and .dll files. How can I bypass HP's short-sighted install program and get this printer up and running on Home server? I'll be happy with basic print functionality and will save the task of enabling scanning for another time.

    Read the article

  • Windows Explorer keeps crashing in Windows 8.1

    - by Jonathan Allen
    This started a few days ago on a machine that has been running WIn 8.1 for over a month. I just finished a clean install of Windows 8.1 with a handful of apps like Dropbox and Office. Yet I'm still getting Windows Explorer crashes such as this: Faulting application name: Explorer.EXE, version: 6.3.9600.16408, time stamp: 0x523d251b Faulting module name: SHELL32.dll, version: 6.3.9600.16409, time stamp: 0x523fac81 Exception code: 0xc00000fd Fault offset: 0x0000000000189247 Faulting process id: 0xee8 Faulting application start time: 0x01ced2a62f6e5b2e Faulting application path: C:\WINDOWS\Explorer.EXE Faulting module path: C:\WINDOWS\system32\SHELL32.dll Report Id: e25c6b13-3eb4-11e3-be7a-2cd05a597b87 Faulting package full name: Faulting package-relative application ID: I assume that it is some sort of shell extension, but I don't know how to figure out which one.

    Read the article

  • What key works like End using a Mac with Synergy

    - by Toby Allen
    I have recently got a Mac mini to do IPhone Dev on (like many others) and I am using the excellent Synergy to share one keyboard and mouse with 2 machines and 2 monitors. Everything is lovely and it works a treat. I got used to using the mac, and the alt key works like command button on the mac however one thing I cant figure out is the End key. I use this a lot on windows when wanting to jump to the end of a line of text, however if I press it over synergy on my mac it jumps to the end of the page. Anyone know the key combination I need to get what I want?

    Read the article

  • Mystery undeletable file

    - by Hugh Allen
    I can't delete C:\Config.Msi\75ce84f.rbf. it's not readonly, system or hidden it's not in use by another process (according to Process Explorer) the NT security permissions aren't the problem either - I am the owner and have Full Control ; as a double-check, the Effective Permissions tab shows that I have permission to delete. Yet trying to delete the file gives "Access is Denied" from both Explorer and cmd. I can however rename it or move it to another folder on the same drive. I can also read it and Virustotal says it's clean which is what I would expect (it's just a Windows Installer temp file - a copy of some DLL I think). The relevant line from Process Monitor is: 6:52:14.3726983 PM 112 Explorer.EXE SetDispositionInformationFile C:\Config.Msi\75ce84f.rbf CANNOT DELETE Delete: True Write 1232 Background: I'm using XP SP2. I recently repaired my Adobe Reader installation to make it the default browser plugin again instead of Foxit. (there seems to be no UI to do it otherwise?) So the installer did its thing and then asked to reboot. As is my habit when rebooting is inconvenient I declined the offer and ran pendmoves to find out what files the installer had scheduled to move / delete. It wanted to delete two files with .rbf extension (rollback files) located in C:\Config.msi\. (this applies to both even though I've been speaking about one). So I tried to delete them manually and couldn't. Does anyone have any ideas what could be preventing deletion? (and I don't think it's malware even though I'm not running AV at the moment)

    Read the article

  • search PDFs with non-standard character encodings

    - by Hugh Allen
    Some PDF files produce garbage ("mojibake") when you copy text. This makes it impossible to search them (whatever you search for will not match the garbage). Does anyone have an easy workaround? An example: TEAC TV manual EU2816STF BTW: I am using Adobe Reader - perhaps an alternative viewer might help?

    Read the article

  • Should a webserver in the DMZ be allowed to access MSSQL in the LAN?

    - by Allen
    This should be a very basic question and I tried to research it and couldn't find a solid answer. Say you have a web server in the DMZ and a MSSQL server in the LAN. IMO, and what I've always assumed to be correct, is that the web server in the DMZ should be able to access the MSSQL server in the LAN (maybe you'd have to open a port in the firewall, that'd be ok IMO). Our networking guys are now telling us that we can't have any access to the MSSQL server in the LAN from the DMZ. They say that anything in the DMZ should only be accessible FROM the LAN (and web), and that the DMZ should not have access TO the LAN, just as the web does not have access to the LAN. So my question is, who is right? Should the DMZ have access to/from the LAN? Or, should access to the LAN from the DMZ be strictly forbidden. All this assumes a typical DMZ configuration.

    Read the article

  • What happens to modern-ui apps when they aren't in the foreground?

    - by Mark Allen
    If I start a modern-ui app and then switch to a different app or a normal program running on the desktop, what happens to the first app? I've heard something about the first app being suspended, but realized that I don't really know that for certain. I mean, could you write a SETI@Home (BOINC) app if you wanted to, or will apps that aren't in the foreground always be suspended? Can you change that? I could see changing that based on available resources, running from AC vs. battery, etc. This morning I heard about an iPad being recovered thanks to the "Find my iPad" app, and was wondering whether you could write such a thing as a modern-ui app and have it work without being the running foreground app. (I'm aware that you'd just write a Windows service or similar, that's not what I'm asking about.)

    Read the article

  • Using smartctl to get vendor specific Attributes from ssd drive behind a SmartArray P410 controller

    - by Lairsdragon
    Hi! Recently I have deployed some HP server with SSD's behind a SmartArray P410 controller. While not official supported from HP the server work well sofar. Now I like to get wear level info's, error statistics etc from the drive. While the SA P410 supports a passthru of the SMART Command to a single drive in the array the output I was not able to the the interesting things from the drive. In this case especially the value the Wear level indicator is from interest for me (Attr.ID 233), but this is ony present if the drive is directly attanched to a SATA Controller. smartctl on directly connected ssd: # smartctl -A /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0000 100 000 000 Old_age Offline In_the_past 0 4 Start_Stop_Count 0x0000 100 000 000 Old_age Offline In_the_past 0 5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 8561 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 55 192 Power-Off_Retract_Count 0x0002 100 100 000 Old_age Always - 29 232 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 0 233 Unknown_Attribute 0x0002 088 088 000 Old_age Always - 0 225 Load_Cycle_Count 0x0000 198 198 000 Old_age Offline - 508509 226 Load-in_Time 0x0002 255 000 000 Old_age Always In_the_past 0 227 Torq-amp_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 228 Power-off_Retract_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 smartctl on P410 connected ssd: # ./smartctl -A -d cciss,0 /dev/cciss/c1d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net (Right, it is complety empty) smartctl on P410 connected hdd: # ./smartctl -A -d cciss,0 /dev/cciss/c0d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Current Drive Temperature: 27 C Drive Trip Temperature: 68 C Vendor (Seagate) cache information Blocks sent to initiator = 1871654030 Blocks received from initiator = 1360012929 Blocks read from cache and sent to initiator = 2178203797 Number of read and write commands whose size <= segment size = 46052239 Number of read and write commands whose size > segment size = 0 Vendor (Seagate/Hitachi) factory information number of hours powered up = 3363.25 number of minutes until next internal SMART test = 12 Do I hunt here a bug, or is this a limitation of the p410 SMART cmd Passthru?

    Read the article

  • Virtualmin Configuration

    - by Allen
    I am trying to get Virtualmin setup and have reached a point where my noobish sysadmin skills aren't getting the job done. This is the message I get now when I try and refresh the configuration of Virtualmin. BIND DNS server is installed, and the system is configured to use it. However, the default master DNS server XXXXXX is not a fully qualified domain name. Sendmail is only accepting SMTP connections on the following ports : 127.0.0.1 port smtp. Email from other systems on the Internet will not be accepted. This can be changed in the Sendmail Mail Server module. Please advise what I need to do to get Sendmail configured properly. Thanks!

    Read the article

  • Internet (Flash) video without a PC

    - by Rob Allen
    I am looking to retire my HTPC. So much of what we do with it can be done with one of our video game consoles or an AppleTV that is seems like a waste of space, power and time to maintain. The trouble is that my wife does streaming yoga classes served up via specific websites. I am assuming they are Flash based and so far I have been unable to find Apps for these content providers. My question is, is there a GOOD way to handle flash-based or even HTML5/h.264 web content with one of the other Internet enabled devices in our stack? So far we have: Nintendo Wii Playstation 3 XBox 360 And we're looking to purchase a current generation AppleTV. update The sites are YogisAnonymmous.com and YogaJournal.com, both are confirmed as Flash.

    Read the article

  • Good free OCR with GUI for correcting mistakes? (for Windows)

    - by Hugh Allen
    I've used SimpleOCR, which has a nice GUI for correcting mistakes. Unfortunately it makes a lot of mistakes! (and suffers other bugs and limitations) On the other hand Tesseract is more accurate but has no GUI at all. Is there a free OCR program for Windows which has a nice GUI and a low error rate? I want it to highlight suspect words (by OCR uncertainty, not just spell checking) and show the original (bitmap) word while I'm editing the OCRed word similar to what SimpleOCR does. Open-source would be best, followed by freeware, then trial / demo / crippleware a long way behind.

    Read the article

  • qtcreator keyboard problem: azerty/qwerty

    - by Allen
    I picked up the qt SDK and I've been trying it out. I'm working in English but I have a French AZERTY keyboard. When I run Qt Designer all is fine. When I run Qt Creator or Qt Designer from within Qt Creator things work as though I had a QWERTY keyboard, so I have to hit the "q" key to get an "a", etc. Qt Creator is version 1.3.1 and it is using Qt 4.6.2. My PC is running XP. What is going on and what is to be done? Any ideas? Editing a program in this setup is, of course, impossible! Luckily I discovered I can use an external editor, so I can use xemacs, which would be my first choice anyway, but this keyboard problem is a real nuisance! Thanks.

    Read the article

  • good free OCR with GUI for correcting errors (for Windows)

    - by Hugh Allen
    I've used SimpleOCR, which has a nice GUI for correcting errors. Unfortunately it makes a lot of errors! (and suffers other bugs and limitations) On the other hand Tesseract is more accurate but has no GUI at all. Is there a free OCR program for Windows which has a nice GUI and a low error rate? I want it to highlight suspect words (by OCR uncertainty, not just spell checking) and show the original (bitmap) word while I'm editing the OCRed word similar to what SimpleOCR does: Open-source would be best, followed by freeware, then trial / crippleware a long way behind.

    Read the article

  • How to fix Windows 7 always delete file permanently

    - by Allen
    I am using a laptop from my company, installed with Windows 7. I found that I cannot delete the files to Recycle Bin. The files will always deleted permanently without going to the Recycle Bin. I am sure that the setting of the Recycle Bin is not "Remove files immediately when deleted". Then, I checked that, deleting files work fine in other drives, but only C: does not work. Besides that, C:\$RECYCLE.BIN is missing, but D: and E: have the $RECYCLE.BIN. I think that is why there is no problem other drives to use Recycle Bin. Please help.

    Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >