Search Results

Search found 21809 results on 873 pages for 'display interfaces'.

Page 8/873 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• Dell 620 display is too bright to use

  - by keith

  I have a Dell D620 with a display problem. In windows 7 the display seems to be too bright, the text is broken up, the only way to see the mouse is at a very oblique angle. Changing the brightness with fn and brightness control has little/no effect. When I put it in high contrast mode I can see all the colors, but any windows pictures etc are still useless. I cannot get it to connect to an external monitor via VGA port or via a USB-VGA connector.

  Read the article

• Have 3 Monitors Display the same thing? (WinXP)

  - by Drew Tenenbaum

  I have a setup in which there is a Computer running windows XP, with 3 monitors plugged into it, with a "Matrox Millennium P750" Graphics card. What I want is to enable mirroring of ALL THREE MONITORS, meaning I want all the monitors to display the same image. In Matrox Powerdesk, it does not have an option to do this, and I'm pretty sure that Windows XP does not support it nativley. I really should only need some software/drivers, right? What can i do to display the same thing on 3 screens?

  Read the article

• Compaq Q2009 monitor display Issues

  - by jasonco

  I have this compaq q2009 monitor 20' inches and I am having display issues. When I turn on the computer the image is displayed fine for a fraction of a second and then the display goes black. If I turn off the monitor and turn it on again the the same thing happens: the image is displayed for a fraction of a second and then goes black. This is odd. I've looked all over the web and I haven't found anything useful (not even in the HP website). So there is no "out of range" or "recommended resolution" message. It just displays and then goes black. I think the resolution is fine because it was working OK until recently and I haven't changed anything in that regard. Any help would be appreciated. Thanks.

  Read the article

• Adding a CRT display to my HP Mini laptop

  - by Ritwik G

  I tried to add a CRT display to my HP Mini. Here are the details : This is where I thought the display plug must be inserted. This is what the plug looks like: (Please tell me what this thing is actually called. I am pretty sure it is not called a plug. lol) This is where the above plug usually goes into my desktop CPU : Details of my CPU monitor, which I am trying to connect : It did not work :( You can see it not working below: (Yes, the CRT Monitor was switched on) Can this ever work ? How to make this work ?

  Read the article

• Connect Lenovo Thinkpad Edge e120 to WQHD display (such as Dell U2711) through HDMI

  - by Fulvio

  On paper, the HDMI version of the Lenovo Thinkpad Edge e120 is 1.3, which supports WQHD. Does it actually work? I want to connect the e120 to a WQHD display, such as the Dell U2711 or an Apple Cinema Display. I run Windows 7 Ultimate and latest drivers. The e120 I think has the Intel HD Graphics 3000 onboard chipset. I don't have the chance to test out the e120 with neither of these displays, so I'm seeking for an opinion from those who have tried. Thank you

  Read the article

• "Fuzzy" Display Problems on New OpenSUSE 11.3 Install

  - by Kryten

  Hi, I have a old Desktop that has a new installation of OpenSUSE 11.3 on it. To get straight to the point, whenever I try to start-up OpenSUSE, my display goes "fuzzy" (almost like a badly tuned TV) and sometimes (not always) my monitor goes black and says "Out of Range: 15.6kHz/49Hz": I assumed that this was a driver problem, so I download the drivers from nvidia and ran the shell script, completed and rebooted. Then OpenSUSE failed to boot with something like "nscd failed to start". At that point I decided to re-install and I did, but this time I tried un-checking "Automatic Configuration" to see if that helped. Got through the install and still have a problem. Unfortunately, my Linux troubleshooting skills are non-existent, so has anyone got any ideas on what could be the problem (is it the display driver?) and how I can fix the problem?

  Read the article

• Determine display or VNC session based on PID

  - by Daniel Kessler

  I frequently VNC into a server where we run many concurrent computationally intensive matlab processes. Sometimes, one of my processes misbehave, which I can see from top, but I have a hard time figuring out which VNC session it's running on, or more specifically, which display it's running on. Suppose I see that PID 8536 looks like a resource hog, and I want to investigate. Because it's a matlab session, I know there is likely an IDE open somewhere, and I want to check to see if anything important is happening before I kill it. We've solved this somewhat awkwardly in the past by identifying which PTY 8536 was launched from, then looking at a process tree to figure out things launched in that context, scrolling up, and seeing the VNC initialization. Seems like there must be a better way to go PID - X Display (or VNC Session).

  Read the article

• $DISPLAY dependent gtk themes

  - by Vlad Seghete

  I have a computer at home that I log into remotely. The "monitor" for it is a TV, so I want gtk applications to use a large font and icon theme, which I managed to do by editing the ~/.gtkrc-2.0 file and some other similar stuff. What I want to be able to do is have a separate theme for when I'm logging in remotely. The best way to explain is that I would like my gtk theme choice to be dependent on the X display that the application is started on. For example, if I start something on :0.0 then that is the TV and I want large fonts, but if I start it on localhost:10.0 I want to use a regular size font, because it will get rendered on my laptop screen. The elegant solution would be to have some sort of IF statement in the .gtkrc-2.0 file that checks the $DISPLAY variable and behaves accordingly. The problem is I can't find any documentation on control structures in .gktrc files, or if it's even possible to do that.

  Read the article

• HP Pavilion dv3 volume control display driver on Windows 7

  - by Farinha

  I've recently bought an HP Pavilion dv3-2150ep and I'm having a hard time getting the volume control display to work as expected. The control is a back-lit touch-sensitive bar above the keyboard. Now the buttons to turn the volume up and down actually do it, but the lightning is not changing at all. The mute button does change color when toggled. I'm not sure if I'm missing any drivers here (I've installed all of those on the HP support page that seem to have something to do with sound and/or display) or if I have to activate this somewhere. Any ideas?

  Read the article

• Exemplars of large document-centric applications with COM/XPCOM/.NET interfaces.

  - by Warren P

  I am looking for exemplars (design examples) showing the use of interfaces (aka 'protocols' for you smalltalkers) to design a document management architecture in a large Word Processor, Spreadsheet, vector graphic or publishing package, or office-productivity (non-database) application with support for as many of the following as possible: any open source project, will be ideal, and language of implementation is unimportant since I am looking for design examples, however an object oriented language with support for "interfaces" is a must. I know at least a dozen languages, and I'm willing to study any application's source. use of "interface" could loosely be applied to either XPCOM or COM interfaces, or .NET interfaces, or even the use of pure-virtual (virtual+abstract) base-classes for OOP languages that lack the ability to declare an interface distinct from a class. I am mostly looking for a robust, thorough and flexible implementation for a document, IDocument, various document views (IDocumentView), and whatever operations make sense in that case. I am particular interested in cases where the product in question is a real-world product. For example, if anybody familiar with OpenOffice can tell me if the code contains a good sample design. I am looking for design documentation that outlines the design of the interfaces for such an application. So for example, if the openoffice spreadsheet has such an interface design, then that might be the best case, because it is a widely used real-world design, with millions of users, rather than a textbook example, which is minimal, and contrived. I know that the Mozilla platform uses XPCOM, and its design is heavily "interface" oriented, but I am looking more for a "word processor" or "spreadsheet" type of document design, rather than a web-browser. I am particularly interested in the interfaces used to access to data and meta-data such as markup (attributes like bold, and italics, and font size), and the ability to search and look up named entities within a document.

  Read the article

• Adding custom interfaces to your mock instance.

  - by mehfuzh

  Previously, i made a post  showing how you can leverage the dependent interfaces that is implemented by JustMock during the creation of mock instance. It could be a informative post that let you understand how JustMock behaves internally for class or interfaces implement other interfaces into it. But the question remains, how you can add your own custom interface to your target mock. In this post, i am going to show you just that. Today, i will not start with a dummy class as usual rather i will use two most common interfaces in the .NET framework  and create a mock combining those. Before, i start i would like to point out that in the recent release of JustMock we have extended the Mock.Create<T>(..) with support for additional settings though closure. You can add your own custom interfaces , specify directly the real constructor that should be called or even set the behavior of your target. Doing a fast forward directly to the point,  here goes the test code for create a creating a mock that contains the mix for ICloneable and IDisposable using the above mentioned changeset. var myMock = Mock.Create<IDisposable>(x => x.Implements<ICloneable>()); var myMockAsClonable = myMock as ICloneable; bool isCloned = false;   Mock.Arrange(() => myMockAsClonable.Clone()).DoInstead(() => isCloned = true);   myMockAsClonable.Clone();   Assert.True(isCloned);   Here, we are creating the target mock for IDisposable and also implementing ICloneable. Finally, using the “as” for getting the ICloneable reference accordingly arranging it, acting on it and asserting if the expectation is met properly. This is a very rudimentary example, you can do the same for a given class: var realItem = Mock.Create<RealItem>(x => {     x.Implements<IDisposable>();     x.CallConstructor(() => new RealItem(0)); }); var iDispose = realItem as IDisposable;     iDispose.Dispose(); Here, i am also calling the real constructor for RealItem class.  This is to mention that you can implement custom interfaces only for non-sealed classes or less it will end up with a proper exception. Also, this feature don’t require any profiler, if you are agile or running it inside silverlight runtime feel free to try it turning off the JM add-in :-). TIP :  Ability to  specify real constructor could be a useful productivity boost in cases for code change and you can re-factor the usage just by one click with your favorite re-factor tool.   That’s it for now and hope that helps Enjoy!!

  Read the article

• Should I expose IObservable<T> on my interfaces?

  - by Alex

  My colleague and I have dispute. We are writing a .NET application that processes massive amounts of data. It receives data elements, groups subsets of them into blocks according to some criterion and processes those blocks. Let's say we have data items of type Foo arriving some source (from the network, for example) one by one. We wish to gather subsets of related objects of type Foo, construct an object of type Bar from each such subset and process objects of type Bar. One of us suggested the following design. Its main theme is exposing IObservable objects directly from the interfaces of our components. // ********* Interfaces ********** interface IFooSource { // this is the event-stream of objects of type Foo IObservable<Foo> FooArrivals { get; } } interface IBarSource { // this is the event-stream of objects of type Bar IObservable<Bar> BarArrivals { get; } } / ********* Implementations ********* class FooSource : IFooSource { // Here we put logic that receives Foo objects from the network and publishes them to the FooArrivals event stream. } class FooSubsetsToBarConverter : IBarSource { IFooSource fooSource; IObservable<Bar> BarArrivals { get { // Do some fancy Rx operators on fooSource.FooArrivals, like Buffer, Window, Join and others and return IObservable<Bar> } } } // this class will subscribe to the bar source and do processing class BarsProcessor { BarsProcessor(IBarSource barSource); void Subscribe(); } // ******************* Main ************************ class Program { public static void Main(string[] args) { var fooSource = FooSourceFactory.Create(); var barsProcessor = BarsProcessorFactory.Create(fooSource) // this will create FooSubsetToBarConverter and BarsProcessor barsProcessor.Subscribe(); fooSource.Run(); // this enters a loop of listening for Foo objects from the network and notifying about their arrival. } } The other suggested another design that its main theme is using our own publisher/subscriber interfaces and using Rx inside the implementations only when needed. //********** interfaces ********* interface IPublisher<T> { void Subscribe(ISubscriber<T> subscriber); } interface ISubscriber<T> { Action<T> Callback { get; } } //********** implementations ********* class FooSource : IPublisher<Foo> { public void Subscribe(ISubscriber<Foo> subscriber) { /* ... */ } // here we put logic that receives Foo objects from some source (the network?) publishes them to the registered subscribers } class FooSubsetsToBarConverter : ISubscriber<Foo>, IPublisher<Bar> { void Callback(Foo foo) { // here we put logic that aggregates Foo objects and publishes Bars when we have received a subset of Foos that match our criteria // maybe we use Rx here internally. } public void Subscribe(ISubscriber<Bar> subscriber) { /* ... */ } } class BarsProcessor : ISubscriber<Bar> { void Callback(Bar bar) { // here we put code that processes Bar objects } } //********** program ********* class Program { public static void Main(string[] args) { var fooSource = fooSourceFactory.Create(); var barsProcessor = barsProcessorFactory.Create(fooSource) // this will create BarsProcessor and perform all the necessary subscriptions fooSource.Run(); // this enters a loop of listening for Foo objects from the network and notifying about their arrival. } } Which one do you think is better? Exposing IObservable and making our components create new event streams from Rx operators, or defining our own publisher/subscriber interfaces and using Rx internally if needed? Here are some things to consider about the designs: In the first design the consumer of our interfaces has the whole power of Rx at his/her fingertips and can perform any Rx operators. One of us claims this is an advantage and the other claims that this is a drawback. The second design allows us to use any publisher/subscriber architecture under the hood. The first design ties us to Rx. If we wish to use the power of Rx, it requires more work in the second design because we need to translate the custom publisher/subscriber implementation to Rx and back. It requires writing glue code for every class that wishes to do some event processing.

  Read the article

• Iverter, inverter cable, or a display cable?

  - by krebshack

  I was recently hired at a small repair shop. I work indoors while my boss does on site calls for small businesses. I have to troubleshoot and fix laptop screens a few times a week and this is why I'm posting this question. I'm having trouble figuring out how to stream line the troubleshooting process. For example, how do I determine whether the inverter is broken while also determining that the inverter cable is not. How can I quickly decide that the inverter cable is broken while knowing that the inverter is most likely not broke. Or how do I know that it's just the display cable? It seems like this is a good way to approach things: "It could be the inverter, backlight, or the LCD panel itself. Backlight failure is usually hinted at by a pink hue to everything. Inverter failure usually results in the dimming of images on the screen to the point where the backlight is not even on (the inverter provides power to the backlight)" Source. While remembering that things "like flickering, screen freeze in dark image and [a] corner starts to get brighter" point to a "failure in the LCD panel itself, though it could just as easily be a loose data cable connected to the back of the LCD." Source. In short, I'm soliciting advice that anyone might have on how to quickly make the best decision about what's causing problems with laptops display. Thank you.

  Read the article

• x display problems in centos 5.5

  - by John Ruiz

  I have a Dell E510 desktop with a geForce 7200 instead of the ATI x600 it came with. I have attempted to install CentOS 5.4 x86_64 (DVD), CentOS 5.5 (net install), and CentOS 5.5 x86_64 (DVD). Gnome desktop. All of these run into the same issue. When I put the DVD into the machine and reboot, the installer begins and I select "graphical install". I see text that say anaconda is starting, and then my screen goes nuts. It's not black, but rather a screen full of diagonal stripes or multiple colors. So I attempted to do a text install of CentOS 5.5 (DVD) and got it installed. When I booted for the first time, I logged into the virtual console and started X (startx). The desktop came up and it already had the display properties GUI up. I changed it from 800x600 to 1680x1050, saw that there were updates available, installed them, and then rebooted. When I start X from the virtual console this time, I get exactly the same display problem as I described before. Does anyone know what might be causing this and what I can do about it? edit: I should also mention that I'm capable of installing Windows 7 and Ubuntu 10.04 onto this machine with absolutely no issues at all.

  Read the article

• External monitor image not centered in the screen

  - by kemp

  I'm using Xorg 7.5 on a Radeon HD4870 with the FOSS radeonhd server on my HP 6830s. The laptop has a VGA connector and I attach it to a 37" panasonic plasma TV. It works fine except for a little annoyance: when activated, the TV screen is set to the resolution of 1360x768 (which it reports as being the highest it supports) but all the image is shifted by about 100 pixels to the right. I can't see the leftmost part of the page, and I have a black vertical bar to the right. If I change the resolution to 1024x768 there is no shifting, the image fills the entire screen with no parts hidden, but at this resolution the image is stretched. How can I tune the position on the external monitor so that the image is centered in the screen filling it entirely?

  Read the article

• Enlarging everything on 16" 1920x1080 notebook display in Windows 7

  - by Rob

  Does Windows 7 have an option to enlarge everything on the screen, e.g. via a spi setting? How well does this work? i.e. do the objects look clear when enlarged? I ask this because sometimes software that enlarges non-photographic bitmap images e.g. icons and symbols can leave them artifacted with harsh jaggier slopes and blurred lines. I've tried the dpi setting in Windows XP but it doesn't enlarge everything, and some things are not so clear as described above. I'm looking at a notebook/laptop with this spec. I've already enjoyed using a 15.4" 1920x1200 display for 5 years. I've tried the dpi setting in Windows XP but it doesn't enlarge everything, and some things are not so clear as described above. I am buying a laptop for my father who will probably prefer larger objects on the screen, although I want to provide some future proofing by allowing more on the screen if needed. I'm not interested in answers that debate the effectiveness or otherwise merits of 1920x1080 on a 16" display, please. The alternative option of 1366x768 seems too little.

  Read the article

• Windows 8 screen goes black after a minute

  - by Deni

  My laptop screen goes black after about a minute of inactivity. I've already tried setting the Screen Saver to anything other than Blank and increasing the Wait but it still keeps happening. Also checked my Power Options, the plan I currently have is set to turn the screen off only after an hour. If I move the mouse or press any key on the keyboard the screen wakes up. Any other ideas why this is happening and how to fix it?

  Read the article

• Brightness too dark or too bright

  - by YatharthROCK

  Basically, below a seemingly-arbitrary threshold (seems to be around 60%) my laptop screen is too dark to really make out much, and above that threshold it takes its maximum brightness (which is waay too bright for my eyes). This problem only occurs when I change the brightness using Windows' UI. Changing the brightness using Fn keys on my keyboard works as expected; unless the screen went into dark mode because of Windows, in which case they have no effect. This problem started occuring on my ASUS laptop very recently. My laptop has a poor battery, but I don't think that's related. What is going on? I tried resetting power plan settings, turning off adaptive brightness and restarting. I'll give any info asked for. Help required urgently...

  Read the article

• Third Monitor (Mini Display Port, Display Port)

  - by muhsing

  I have got a Hd 6950(2x minidisplay port 2x DVI port 1x HDMI port) graphic cards. And I have got a three monitor. I want to active it all. I learned to need an active minidisplay port to vga or minidisplay port to dvi cable. Here's my problem. I want to buy minidisplay port to dvi but my country doesn't have it but I can find display port to active dvi cable. I have a minidisplay port to display port cable. If I buy Sapphire ACTIVE DP TO SL-DVI CABLE will my third monitor work? I mean I will plug mini display port to display port cable first and after I will plug active dp to dvi cable. Will it work? If someone help me I will be very grateful. I have this And I will buy this After this processing Will my third monitor work with eyefinity? Sorry for my English. I hope you will understand me. Take care.

  Read the article

• problem in accessing the path involving pagination using display tag

  - by sarah

  Hi All, I am using display tag for pagiantion and display of the data in table format the code is like <display:column title="Select" style="width: 90px;"> <input type="checkbox" name="optionSelected" value="<c:out value='${userList.loginName}'/>"/> </display:column> <display:column property="loginName" sortable="false" title="UserName" paramId="loginName" style="width: 150px; text-align:center" href="./editUser.do?method=editUser"/> the pagesize is one it will display one in a page and eidt page will be dispaly on click of login name,but when i go to the second page i get an error saying /views/editUser path not found.How exactly should i define the path ? the struts-config is like <!-- action for edit user --> <action path="/editUser" name="editUserForm" type="com.actions.UserManagementAction" parameter="method" input="/EditUser.jsp" scope="request"> <forward name="success" path="/views/EditUser.jsp" /> <forward name="failure" path="/views/failure.jsp" /> </action> Pleas tell me how should i define the access path for display tag as on click of edit link the first page works but not the second edit

  Read the article

• Beam display from any computer to shared display

  - by rcourtna

  There are probably a lot of ways to skin this cat. Looking for the cleanest. In our office, we have a large display in a common area. We want to allow any computer in our office (mac, linux, windows) to output its video on the large display. Since some of the computers in the office are stationary, and it's not practical to run video cables everywhere, it would be preferable to make this all happen through the network. It is also possible for us to connect a dedicated (& networked) PC to the large display. How can I do this?

  Read the article

• Display Driver stopped responding and recovered successfully- Blue Screen - HP Elite Book

  - by Fahad Saleem

  I have HP ELiteBook , this problem has become a routine headache for me (after every 20, 25 minutes_ - While using, suddenly everything hangs and black out goes around and then a message pop at the task bar below that display driver stopped ...and successfully recovered but the hangs and black screen continues and then the Blue Death Screen comes" and then i have no other option but to restart Is this a driver problem ? Hardware problem ? what should I do Please be specific , no stories and theories

  Read the article

• which graphics driver will solve my laptop screen display problem?

  - by vi.su.

  which graphics driver will solve my laptop screen display problem? Recently installed Ubuntu 10.04.4 LTS on my laptop and upgraded it to 12.10, through 12.04.1 LTS. I am not able to get the display right, from the beginning. During boot laptop screen is all green, and images / videos are not getting displayed properly when logged in. Actual problem started last week, when this laptop was with Windows Vista (preloaded), and I tried to update Nvidia graphics drivers. something went wrong and I couldn't find a way to fix, so decided to install Ubuntu. Over last week, installed / re-installed Ubuntu many times with various drivers with no success. Laptop : Dell Inspiron 1420 Installed OS : ubuntu 10.04 LTS (Current, Ubuntu 12.10) Nvidia driver : GeForce 8400M GS (tried in previous installations; not installed now) Print-screen was not able to catch this issue as mentioned in the comment, so I am posting screen photos.

  Read the article

• Connecting a 2560x1440 display to a laptop?

  - by tjollans

  Having read Jeff Atwood's blog post on Korean 27" IPS LCDs, I've been wondering to what extent these are useful in a notebook + large display situation. I own a Lenovo Thinkpad Edge E320 with 2nd gen. integrated Intel graphics. According to the spec from Intel, this should support HDMI version 1.4, and, using DisplayPort, resolutions up to 2560x1600. HDMI version 1.4 supports resolutions up to 4096×2160, however, according to c't (German), the HDMI interface used with Intel chips only supports 1920x1200. The same goes for the DVI output - dual-link DVI-D, apparently, is not supported by Intel. It would appear that my laptop cannot digitally drive this kind of resolution. Now what about other laptops? According to the article in c't above, AMD's integrated graphics chips have the same limitation as Intel's. NVIDIA graphics cards, apparently, only offer resolutions up to 1900x1200 over HDMI out of the box, but it's possible, when using Linux at least, to trick the driver into enabling higher resolutions. Is this still true? What's the situation on Windows and OSX? I found no information on whether discrete AMD chips support ultra-high resolutions over HDMI. Owners of laptops with (Mini) DisplayPort / Thunderbolt won't have any issues with displays this large, but if you're planning to go for a display with dual-link DVI-D input only (like the Korean ones), you're going to need an adapter, which will set you back something like €70-€100 (since the protocols are incompatible). The big question mark in this equation is VGA: a lot of laptops have it, and I don't see any reason to think this resolution is not supported by the hardware (an oft-quoted figure appears to be 2048x1536@75Hz, so 2560x1440@60Hz should be possible, right?), but are the drivers likely to cause problems? Perhaps more critically, you'd need a VGA to dual-link DVI-D adapter that converts analog to digital signals. Do these exist? How good are they? How expensive are they? Is there a performance penalty involved? Please correct me if I'm wrong on any points. In summary, what are the requirements on a laptop to drive an external LCD at 2560x1440, in particular one that supports dual-link DVI-D only, and what tools and adapters can be used to lower the bar?

  Read the article

• Dell 36400 Display issue - "doubling up" intermittently

  - by alex

  I've got a Dell E6400 It's suddenly developed an intermittent fault with the display Every now and again, it seems to boot up with "double vision" By that I mean, its split horizontally, with each half showing the same thing, but with low resolution, and looks grainy - if that makes sense (I will try to get a couple of pictures if I can) I haven't changed any hardware or anything. I have re-built windows, to see if that fixed the problem, it didn't. I've upgraded the BIOS to see if that would help, still same problem. I'm out of ideas :-(

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >