Search Results

Search found 10936 results on 438 pages for 'monitor refresh rate'.

Page 8/438 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• second monitor wont display

  - by Ryan

  hi all my problem is this: i have one video card (radeon hd 4350) and 2 monitors (dell). the first monitor works using dvi-to-dvi. the second does not, using hdmi-to-dvi. the monitor does not register any input. however when i use vga-to-vga, the second monitor does work, with a typically low vga resolution. we have tested the hdmi-to-dvi cable, so why does the monitor not register any input? using windows vista. i have installed all the lastest drivers, done all the basic stuff etc. any help at all would be appreciated. thanks

  Read the article

• Viewsonic Monitor Resolution - Drivers are not working

  - by ravidev

  I have Viewsonic va1716w monitor which has VGA/D-SUB video input. I bought new Motherboard Intel DH67GD which has HDMI & DVI output. I connect my motherboard to monitor using DVI to VGA connector. It's working. Yesterday I installed windows 7 OS and also installed monitor drivers(downloaded from viewsonic site - signed version) When i set display resolution to 1440 x 900. It's not setting it.it sets back to 800x600. What should i do to make resolution to 1440x900 (monitor resolution)? DVI to VGA causing this problem or i need to do any trick? Any link to download drivers Please guide me.. Thanks in advance !!

  Read the article

• AA doesn't work due to monitor?

  - by MikeQ

  I have a monitor (with TV tuner - Philips 221T1SB), native resolution of 1920x1080, but there is an Overscan in Catalyst. It says from left to right '10%' and '0%', if i set it (all the way to the left) on 10%, i get screen with black borders (you know what i mean), but if i set it to 0%, i get a filled monitor. It does make sense, but why the hell is there such an option? I never had any AA issues before, but now, with this monitor, here they go. I can't find any solution, i have only one lead = overscan, or pretty much anything with the CCC settings. Yes, i almost forgot. After a bit of trying to configure the monitor with remote, i found there is a PC channel option, few other channels, and then a HDMI option. I have monitor through HDMI, but why i get black screen when i select the PC channel? That might be another problem. I tried almost everything. Please guys, give me a hand. I don't want jaggies! CPU: Intel I5-750 @4,0GHz RAM: Corsair Vengeance 8GB 1600MHz GPU: AMD Gigabyte HD 7950 Windforce @1100/1400, 1,174V Motherboard: ASUS P7P55D-E EVO

  Read the article

• second monitor wont display [closed]

  - by Ryan

  hi all my problem is this: i have one video card (radeon hd 4350) and 2 monitors (dell). the first monitor works using dvi-to-dvi. the second does not, using hdmi-to-dvi. the monitor does not register any input. however when i use vga-to-vga, the second monitor does work, with a typically low vga resolution. we have tested the hdmi-to-dvi cable, so why does the monitor not register any input? using windows vista. i have installed all the lastest drivers, done all the basic stuff etc. any help at all would be appreciated. thanks

  Read the article

• Viewsonic monitor keeps showing its on-screen menu incessantly

  - by markvgti

  Since yesterday my Viewsonic 22" monitor (VX2255wmb) keeps showing its on-screen menu incessantly, without my touching any of its buttons. The menu comes on in the centre of the screen, stays on for 8-10 seconds, disappears for a second or two, then repeats the cycle. This happens whenever there's a signal being sent to the monitor. I can't actually navigate the menu when it appears on-screen. Pressing the power button, or the Up and Down buttons on its right edge dismiss the menu, only for it to reappear again. These symptoms have appeared before, but earlier they'd stop after 5-10 mins. The power button on the monitor has always been iffy, but now it doesn't seem to be working at all--have to switch off power supply from mains when I leave my desk. Using DVI input on this monitor as my HP desktop has DVI output.

  Read the article

• After turning off my monitor, the computer won't display again

  - by Nick Lassonde

  If I physically turn off the monitor (DVI connection) and then turn it back on, the connection does not wake back up. The monitor enters "Power Saving" mode. I've tried unplugging the DVI cable and plugging back in, I've tried updating the video card drivers (it's Windows Vista; Windows 7 failed to install on this machine). I can use VNC to connect to the machine again, and after a reboot, the monitor works again. Does anyone have any idea?

  Read the article

• performance monitor in iis 7 to monitor which website is using most resources (asp.net)

  - by Karl Cassar

  I am using Windows Server 2008 R2 and IIS 7.5, and am hosting multiple websites on the same webserver. Is it possible to use Performance Monitor to know on average which website is using the most resources? I've added a user-defined Data Collector Set in Performance Monitor collecting data for 1 day. However, I could not find any details which hint which website is using the most resources. Which counters are crucial to monitor websites? The generated report tells me that the top process is w3wp##1 - how can I know which website it corresponds to? I've also tried to add counters for ASP.Net Applications for all object instances, however % Managed Processor Time (estimated) is 0 at all times.

  Read the article

• Windows 7 changes desktop icon location when switching from External Monitor to Internal Monitor (laptop)

  - by Gareth Jones

  I have a Windows 7 Laptop, and lately its been acting really weird with my 1080p Monitor. When I get home from school, Ill plug my screen in, and close my laptop lid (which makes the laptop treat the Monitor as the primary and only screen). However it will move my desktop icons! This also happens when I remove / unplug the screen, as shown in the pictures. I hate this, as Im the kinda person who's use to every icon being in a set spot, and so am use to their location. Its a massive hassle to try and move the icons back to their original spot. Anyone have any ideas on how to fix this? Thanks P.S it could be due to the resolution of the screen's being different, but this never happened before in the past Icons on External Moniter (after having moved them manually back into place): Icons after unplugging external monitor (and so using Laptop screen):

  Read the article

• Teamviewer: cannot control monitor 1, but can control monitor 2

  - by DaveT

  I'm using the web client of Teamviewer from my work computer trying to control my home computer. I have 2 monitors on the remote desktop, but for some reason only have control on the second monitor. When I switch to the main monitor (monitor 1), I cannot do anything and cannot even move the cursor. But I have no issues when I switch over to the second monitor (monitor 2). I used to have no issues with either, but in the past couple of months this has been causing me issues. Anyone have a suggestion? Thanks!! Also... Here is the log from the Teamviewer session. Showing me switching back and forth between the monitors. (just in case this will help). I had to remove the links in order to post the log since I don't have enough reputation points, but they were just teamviewer login weblinks. =============================================================================== 21.08 16:00:41,176: Version: 9.0.15099 21.08 16:00:41,177: Sandbox: remote 21.08 16:00:41,177: SysLanguage: en 21.08 16:00:41,177: VarLanguage: en 21.08 16:00:41,177: Flash Player: PlugIn (WIN 14,0,0,179) 21.08 16:00:41,178: UseLanguage: en 21.08 16:00:41,178: UseLanguage: en 21.08 16:00:41,182: TeamViewer hasPassword: true 21.08 16:00:41,418: ExternalConnect id=910035824 21.08 16:00:41,419: CT connect 910035824 masterURL: , sandbox = remote 21.08 16:00:41,425: MC.requestRoute(910035824) 21.08 16:00:41,426: MC.sendMasterCommand text=F=RequestRoute2&ID1=777&Client=TV& ID2=910035824&SA_AccountID=26641022&SA_PasswordMD5HashBase64Encoded=& SA_SessionSecret=f7H6Z7SYfX5ahQ7SJq/r/K20PBYg9fOZhp+DKLhf5ts=&SA_SessionID=1558929948& V=9.0.15099&OS=Flash 21.08 16:00:41,426: MC wait for ping completion 21.08 16:00:42,064: PS.socket event: [Event type="connect" bubbles=false cancelable=false eventPhase=2] 21.08 16:00:42,182: PingThread: TCP-Ping ok 21.08 16:00:42,183: MC.socket mode = TCP, MasterURL: 21.08 16:00:42,183: MC.connect: 21.08 16:00:43,058: PS.socket event: [Event type="connect" bubbles=false cancelable=false eventPhase=2] 21.08 16:00:43,058: MC.connectHandler: [Event type="connect" bubbles=false cancelable=false eventPhase=2] 21.08 16:00:43,236: MC.requestRouteResponse: [email protected]_10800_128000_762319420_910035824_10000__1_0_16778176_128000_16778176: 128000;2147483647:1280000;4:640000_786297_786297 21.08 16:00:43,239: CT init socket: TCP 21.08 16:00:43,513: PS.socket event: [Event type="connect" bubbles=false cancelable=false eventPhase=2] 21.08 16:00:43,514: CT.connectHandler: [Event type="connect" bubbles=false cancelable=false eventPhase=2] 21.08 16:00:43,519: Browser name: Netscape 21.08 16:00:43,936: CMD_IDENTIFY id=910035824 ver=2.41 21.08 16:00:44,666: CMD_CONFIRMENCRYPTION: encryption confirmed 21.08 16:00:44,667: Started resendrequest timer 21.08 16:00:45,063: Remote Version: TV 009.000 21.08 16:00:45,501: start classic authentication 21.08 16:00:45,502: Login::SendRequestToConsole(): url= 21.08 16:00:45,828: start srp authentication 21.08 16:00:46,983: checkFirstPacket ok, m_LastReceivedPacketID =4 21.08 16:00:47,148: Login::SendRequestToConsole(): url= 21.08 16:00:47,478: start srp authentication 21.08 16:00:48,210: Login::SendRequestToConsole(): url= 21.08 16:00:48,485: checkFirstPacket ok, m_LastReceivedPacketID =7 21.08 16:00:48,780: TVCmdAuthenticate_Authenticated: 1 21.08 16:00:49,321: Connected to 910035824, name=NEWMAN, os=14, version=9.0.31064 21.08 16:00:49,329: ConnectionAccessSettings: RemoteControl: AllowedFileTransfer: AllowedControlRemoteTV: AllowedSwitchSides: DeniedAllowDisableRemoteInput: AllowedAllowVPN: AllowedAllowPartnerViewDesktop: Allowed 21.08 16:00:52,195: unexpected TVCommand.CommandType == 56 21.08 16:00:52,231: CW received display params: 1680x1050x8 monitors: 2 (active:0) 21.08 16:00:52,301: Caching active, version=2 21.08 16:03:47,158: CW received display params: 1680x1050x8 monitors: 2 (active:1) 21.08 16:04:24,447: CW received display params: 1680x1050x8 monitors: 2 (active:0) 21.08 16:04:40,609: CW received display params: 3360x1050x8 monitors: 2 (active:-1) 21.08 16:04:59,802: CW received display params: 1680x1050x8 monitors: 2 (active:1) 21.08 16:04:59,933: CW received display params: 1680x1050x8 monitors: 2 (active:1) 21.08 16:05:58,419: CW received display params: 1680x1050x8 monitors: 2 (active:0) 21.08 16:06:36,824: CW received display params: 1680x1050x8 monitors: 2 (active:1) 21.08 16:07:07,232: CW received display params: 1680x1050x8 monitors: 2 (active:0)

  Read the article

• kvm-switch, dual monitor, only share one monitor

  - by lydonchandra

  Hi, Setup: 2 physical machines, and 3 LCD monitors, each machine has its own LCD monitor, and I would like to share the 3rd LCD monitor using KVM-switch. Is this possible? (I have already shared the keyboard and mouse using Synergy.)

  Read the article

• How to change metamode in xorg.conf so that my game in FHD will be displayed only in the external monitor?

  - by Patryk

  I would like to launch my game only in the external monitor which I have attached to my laptop with hdmi cable. This is my current xorg.conf # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 319.60 (buildmeister@swio-display-x64-rhel04-15) Wed Sep 25 15:17:31 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "metamodes" "1024x786,NULL;1280x720,NULL;NULL,1680x1050;NULL,1920x1080" SubSection "Display" Depth 24 EndSubSection EndSection Although with this config nothing changes (I have my game displayed in the laptop screen and exceeding a little bit onto the external monitor since I set it to be in 1920x1080) I have read this https://help.ubuntu.com/community/XineramaHowTo but with no luck of solving this issue. The only temporary solution for this problem now is to manually switch of the laptop display and then launch the game.

  Read the article

• Ubuntu failed to detect monitor and very low resolution?

  - by Hiren

  I tried different versions of Ubuntu from 11.04 to 11.10 beta, but got same problem. My desktop pc configuration is, - intel core i5 2400 - DH67BL Motherboard - Inbuilt motherboard graphics - No extra graphics card attached - Acer-H193HQV 18.5" Monitor - 2GB RAM - 250GB Harddisk Problem : Ubuntu can't detect my monitor and saying it Unknown. Moreover, monitor's original resolution is 1366x768 but in the list of resolution there is only 1024x768 and 800x600 are there.

  Read the article

• How do I turn off the laptop screen while using an external monitor?

  - by jpmelos

  When I close my laptop lid, all my screens are turned off (my laptop screen and my LG M237WA monitor). I'd like to know how do I make it turn off only the laptop screen and keep the monitor on (I want that behaviour for when I want to watch a movie on my monitor and don't want any brightness coming for the laptop screen). I'm using a HP Pavilion dv4-1290br, which comes with a nVidia GeForce 8400M GTS. I'm using the nVidia driver and it's working perfectly. For my X settings, I'm using TwinView, my laptop is set to 1280x800 and my monitor to 1920x1080. I hope you guys can help me, for I couldn't find anything so far. Thank you very much.

  Read the article

• Strange monitor issue - screen goes black after a few seconds

  - by Scott Szretter

  My LCD monitor display is going black (turning off). It's a Samsung SYncMaster 2233 widescreen. I am trying to figure out if there is anything I can do about it, or if the monitor is junk. I have tried multiple computers, all have the same issue. I have tried a different vga cable, same issue. Power and video cables are tight / double checked. When I power on the monitor, the blue light turns on at the bottom. Then a second or two later the video comes up as expected and it looks fine. However, about 2-3 seconds after that, the screen goes black. The blue light is still on and solid at the bottom (blue light normally flashes when the monitor is sleeping). If I power cycle the monitor, same thing happens. With no computer connected or when I unplug the vga cable, I see the searching for signal message "digital", then the screen goes black. However it usually shows "digital" then "analog" after that and switches between the two a few times. The buttons on the side do not do anything, although they may be, I just can not see if they are or not. I can usually get the "digital" message by pressing the buttons on the side, but then it quickly goes black again. What is really strange is sometimes I can get it to work fine. I am not sure what the difference is. Last week I connected it up and it worked fine and it stayed fine for at least a week! I did not turn it off or anything, I just let the OS put the display to sleep. Then this week one morning I started having the screen going black issue again. Seems like something is either loose inside or beginning to fail. Do you think there is any hope for it? update: pushing the input select button causes the "digital" and "analog" messages to flash on the screen, but only for a few seconds then it goes black. When it was working properly, those messages would flash back and fourth for probably 10-20 seconds then a message would show saying check input signal, but now just a black screen.

  Read the article

• How to handle the different frame rate on different devices?

  - by Fenwick

  I am not quite sure how frame per second works on a web page. I have a Canvas game that involves in moving an image from point A to B, and measuring the time elapsed. The code can be as simple as: var timeStamp = Date.now(); function update(){ obj.y += obj.speed; text = "Time: "+ (Date.now() - timeStamp) + "ms"; } The function update() is called every frame. The problem is that the time elapsed is different from device to device. It is pretty short on my PC, but get longer on my iPad, and is much longer on my cell phone. I thought it is because the FPS is smaller on mobile devices, so instead of calling update() every frame, I call it every 1ms by using a setInterval. But this does not solve the problem. In my understanding, the function for setInterval is invoked based on the increment in system time, other than frame rate, so it should fix the problem. Am I missing anything here? If the setInterval function is called based on FPS, is there any way to get around with the FPS difference across devices? On a side note, I have sort of a "water simulator" on the same canvas. It involves in redrawing about 60 objects which can be 600x600 pixels for every frame, so it could be a frame rate killer. I am using Phaser.js but not really using much of its functionalities, if that helps.

  Read the article

• Can't get DataGridView to refresh over Linq to SQL (WinForm)

  - by GringoFrenzy

  Very strange situation here: I'm using L2S to populate a DataGridView. Code follows: private void RefreshUserGrid() { var UserQuery = from userRecord in this.DataContext.tblUsers orderby userRecord.DisplayName select userRecord; UsersGridView.DataSource = UserQuery; //I have also tried //this.UserBindingSource.DataSource = UserQuery; //UsersGridView.Datasource = UserBindingSource; UsersGridView.Columns[0].Visible = false; } Whenever I use L2S to Add/Delete records from the database, the GridView refreshes perfectly well. However, if someone is editing the grid and makes a mistake, I want them to be able to hit a refresh button and have their mistakes erased by reloading from the datasource. For the life of me, I can't get it to work. The code I am currently using on my refresh button is this: private void button1_Click(object sender, EventArgs e) { this.DataContext.Refresh(RefreshMode.OverwriteCurrentValues); RefreshUserGrid(); } But the damn GridView remains unaffected. All that happens is the selected row becomes unselected. I have tried .Refresh(), .Invalidate(), I've tried changing the DataSource to NULL and back again (all suggestions from similar posts here)....none of it works. The only time the Grid refreshes is if I restart the app. I must be missing something fundamental, but I'm totally stumped and so are my colleagues. Any ideas? Thanks!

  Read the article

• Refresh page in browser without resubmitting form

  - by Michael

  I'm an ASP.NET developer, and I usually find myself leaving the webpage that I'm working on open in my browser (Chrome is my browser of choice, but this question is relevant for any browser). My workflow typically goes like this: I write code, I rebuild my project in Visual Studio, and then I flip back to my browser with Alt-Tab and hit F5 to refresh the page. This is fine and dandy if a form hasn't been submitted since the page was opened. But if I've been clicking around on ASP.NET form controls, the page has posted form data a number of times, so hitting F5 causes the browser to (sensibly) pop up a confirmation message, e.g., "Confirm Form Resubmission: The page that you're looking for used information that you entered...". Sometimes I do want to resubmit the form, but more often than not, I just want to start over with the page (rather than resubmit form data). The way I usually get around this is to simply add some query string data to the URL so that the browser sees it as a fresh page request, e.g.: page.aspx becomes page.aspx? (or vice-versa). My question is: Is there a better way to quickly request a fresh version of a webpage (and not submit form data) in any of the major browsers? It seems like a no-brainer to me for web development, but maybe I'm missing something. What I'd love to see is something like the last item in this list: F5: refresh page Ctrl-F5: refresh page (and force cache refresh) Alt-F5: request fresh copy of the page without resubmitting the form

  Read the article

• Turn off monitor (energy saving) while in text console mode (in Linux)

  - by Denilson Sá

  How to configure Linux text console to automatically turn of the monitor after some time? And by "text console" I mean that thing that you get on ctrl+alt+F[1-6], which is what you get whenever X11 is not running. And, no, I'm not using any framebuffer console (it's a plain, good and old 80x25 text-mode). Many years ago, I was using Slackware Linux, and it used to boot up in text-mode. Then you would manually run startx after the login. Anyway, the main login "screen" was the plain text-mode console, and I remember that the monitor used to turn off (energy saving mode, indicated by a blinking LED) after some time. Now I'm using Gentoo, and I have a similar setup. The machine boots up in text-mode, and only rarely I need to run startx. I say this because this is mostly my personal Linux server, and there is no need to keep X11 running all the time. (which means: I don't want to use GDM/KDM or any other graphical login screen) But now, in this Gentoo text-mode console, the screen goes black after a while, but the monitor does not enter any energy-saving mode (the LED is always lit). Yes, I've waited long enough to verify this. Thus, my question is: how can I configure my current system to behave like the old one? In other words, how to make the text console trigger energy-saving mode of the monitor? (maybe I should (cross-)post this question to http://unix.stackexchange.com/ )

  Read the article

• Monitor attached to motherboard is out of frequency

  - by Neilvert Noval

  I don't know if this is appropriate to ask it here in superuser. Please, just route this to appropriate stackexchange site if found unrelevant. Here's my scenario. I have bought a new motherboard (MSI 785GT-E63). I already have an old CRT monitor connected to it. After I install a linux OS to it, my monitor will display that it is: Out of frequency. Current frequency is 89Hz. The operating output of my monitor is (around) 60-70Hz. I would like to get this thing work. How can I let my CRT display properly? I was thinking of lowering down video frequency output of my motherboard, but I can't find any settings on my BIOS setup. Additional info: My monitor is attached directly to the built-in video adaptor of my motherboard. (No additional video cards) Install of OS is complete without errors. Please help.

  Read the article

• Dual Monitor + Virtual Desktop software (plus for cube)

  - by xenithorb

  I've recently purchased another monitor, my first one being a TV and being much larger. I now sit at a desk and use my shiny new 24" LED more often, but I like to extend the desktop into the TV. The problem presented with this is to save power and the longevity of my 47" VIZIO, I try to keep it off when possible. What I'm seeking sounds very simple - If any of you have ever used Compiz or Deskspace (Yod'm) - You'll know what im referring to when I talk about a "cube." The most important functionality I'm looking for is the ability to scroll desktop contents between both displays and virtual desktops. Deskspace does and excellent job of presenting an attractive cube, but it creates a separate cube and virtual desktop space for the second extended monitor (now the TV) - Again, what I'm looking to do is scroll between virtual desktops, by passing through both monitors. The net effect of this functionality would allow me to scroll the contents of the extended monitor to the first monitor should a window get caught there without having to turn on the TV. So imagine the horizontal portion of a cube as being actual real monitors - is there anything that allows one to rotate desktops between displays?

  Read the article

• Configure 27" 2560x1440 for a monitor with corrupt EDID

  - by Aras

  I am trying to get a monitor work with my Ubuntu laptop. The monitor is this cheap 27" Korean monitors which has a 2560x1440 resolution -- and nothing else. Here are some specifications of this monitor: 2560x1440 @60Hz Only one dual link DVI-D input -- no other input port (no HDMI or display port) no OSD no scalar reports corrupt EDID does 2560x1440 @60Hz, did I say that already? Anyways, the monitor works beautifully with my Ubuntu desktop which has an nVidia card with DVI output. However, I am having problem using this monitor with my laptop. After some searching around I found a few posts suggesting to use an active adaptor for mini display port, so I went and bought a mini display to dual link DVI-D adaptor.. When using this adaptor the monitor is recognized by nvidia-settings tool but with incorrect resolution information. As you can see the monitor is incorrectly recognized and there are no other resolution available to set. This post on ubuntu forums and this other post on overclock both suggest that the monitor is reporting corrupt EDID file. I have tried following their instructions, but so far I have not been able to display any image on the monitor from my laptop. The laptop I am using is an ASUS G75VW with a 1920x1080 screen. It has a VGA, an HDMI 1.4a, and a mini display port. The graphic card is an nvidia gforce gtx 660M with 2GB dedicated memory. I am running Ubuntu 12.10 on here which I upgrade from 12.04 a few weeks ago. As I said I have tried several suggestions, including specifying Modeline in xorg.conf and also linking to EDID files I found from those forum posts above. However, I am not sure if the EDID files I found are suitable for my monitor. I think the solution to my problem consist of obtaining the EDID file of my monitor and then fixing it and modifying xorg.conf to force nvidia driver to load the correct resolution. However, I am not sure what steps I need to take to do this. Here is the part of sudo xrandr --prop output that is related to this monitor: DP-1 connected 800x600+1920+0 (normal left inverted right x axis y axis) 0mm x 0mm SignalFormat: DisplayPort supported: DisplayPort ConnectorType: DisplayPort ConnectorNumber: 3 (0x00000003) _ConnectorLocation: 3 (0x00000003) 800x600 60.3*+ I was expecting to see the EDID file in this output as was mentioned in this post, but it is not there. After several hours of tweaking X configurations, I decided it was time to ask for help here. I would really appreciate if someone with experience regarding EDID and X configuration could give me a hand to solve this issue.

  Read the article

• Limit rate of outgoing UDP packets per second

  - by tim82

  Hi, since Teamspeak version 3 sends lots of packets per user and our provider is getting problems with his infrastructure above 20.000 packets per second we have to limit it that our servers are not going to be shut down. Red a lot about iptables but was not able to find the right rules. Could you give me an advise how to manage that the server is not going to send more than 19k packets per seconds? We are running on debian 4 Thanks in Advance Tim

  Read the article

• Windows move to external monitor when closing lid

  - by Martijn

  I'm using Cinnamon (on 12.10) on a laptop (Compaq 6710b business model) with an external monitor. Both screens run at 1680 x 1050, the external monitor is located on the right. During normal operation everything works fine; windows open in whatever monitor my mouse pointer is when they open and I can freely drag them to the other monitor. When I close the lid of my laptop both displays shut down as expected. When I open the lid, however, the lock window opens on the external monitor and any windows that were open on the laptop screen have moved to the external monitor as well. Nothing happens between closing the lid and opening it; no suspend, powerdown, hibernate or anything, monitor stays attached; even mouse is untouched (pointer on laptop screen). Is there any way to fix it so my windows stay on whatever monitor I left them before closing the lid? Alternative solutions are welcome.

  Read the article

• Triple Monitor Setup with Nvidia and Compiz

  - by AndrewX192

  I have a triple monitor setup with two video cards on Ubuntu 10.04. I have the monitors and graphics cards currently setup as follows: Nvidia Geforce 210 #1 - 1920x1080 Monitor (Twinview) [Center - Monitor #1] - 1920x1080 Monitor (Twinview) [Right - Monitor #2] Nvidia Geforce 210 #2 - 1920x1080 Monitor (Separate X Screen) [Left - Monitor #3] This works fine, except when I open a program, it shows up in between monitor #1 and #2 - meaning I have to drag it to one screen before I can use the window. Gnome2's gnome-panel also does not work on the twinview setup; it spans between both monitors, but it does not redraw (ex: the clock never changes). In addition, when I maximize an application, it spans both monitors, which is not acceptable. When I enable Xinerama for my setup, gnome-panel no longer spans two monitors, and applications maximize as expected, but compiz does not work, as X11 compositing is not available. The lack of desktop compositing causes problems with dragging windows between screens (redraws take forever). Is there anything I can do to fix these issues without opting for different graphics cards?

  Read the article

• Grails YUI- Datatable complete refresh

  - by geeronimo

  Hi, I have inserted a paginator for my YUI-Datatable. Now I want to refresh my whole page, when the user has changed the view in my Datatable. YUI makes just a refresh (remoteCall) for itself, but I need a refresh for the whole page, because I want to update my Flashanimation too. For any sugest I would be very grateful, Geeron imo Here´s the code for my datatable: paginatorConfig="[ template:'{FirstPageLink} {PreviousPageLink} {PageLinks} {NextPageLink} {LastPageLink} {CurrentPageReport}', pageReportTemplate : '{startRecord} - {endRecord} von {totalRecords}', containers:'dt-paginator', firstPageLinkLabel: '&lt;&lt;', lastPageLinkLabel: '&gt;&gt;', previousPageLinkLabel: '&lt;', nextPageLinkLabel: '&gt;' ]" />

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >