Search Results

Search found 4751 results on 191 pages for 'ram gopal'.

Page 8/191 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

  • Is bigger capacity ram faster then smaller capacity ram for same clock and CL?

    - by didibus
    I know that bigger capacity hard-drives with the same RPM are faster then smaller capacity hard-drives. I was wondering if the same is true for ram. Given two ram clocked at 1600mhz and with identical CLs: 9-9-9-24. Is a 2x8 going to perform better then a 2x4 ? Note that I am not asking if having more ram will improve the performance of my PC, I'm asking if the bigger capacity ram performs better. Thank You.

    Read the article

  • Is bigger capacity ram faster then smaller capacity ram for same clock and CL? [migrated]

    - by didibus
    I know that bigger capacity hard-drives with the same RPM are faster then smaller capacity hard-drives. I was wondering if the same is true for ram. Given two ram clocked at 1600mhz and with identical CLs: 9-9-9-24. Is a 2x8 going to perform better then a 2x4 ? Note that I am not asking if having more ram will improve the performance of my PC, I'm asking if the bigger capacity ram performs better. Thank You.

    Read the article

  • BIOS says 8GB RAM installed but only 6GB is available

    - by Hiroshi
    my machine is a Dell Studio XPS 9100 with 8GB of RAM installed. When I open the BIOS setup and enter the System Info, it shows that my machine got 8GB of RAM installed but only 6GB is available (yes this is from the BIOS only). In Windows 7 (64bit Pro) it shows only 6GB of RAM are available. But if I run CPU-Z then it can detect all 8GB RAM. The machine came pre-configured and I have never opened the case before.

    Read the article

  • set up pernament ramdisk in ubuntu to not using ram when is the ramdisk empty

    - by robo
    Hi I've got 8GB RAM on my laptop running Ubuntu 12.04. I added following record to /etc/fstab tmpfs /media/ramdisk tmpfs defaults,noatime,mode=1777 0 0 What exactly it means? I have tested that I can save 4GB to ram disk at most. Why exactly 4GB? Where did the computer get this number from? And what happens when I don't use that ram disk for a while and when the directory /media/ramdisk is empty? Does it mean that my system can use whole 8GB ram? And what happens when the system runs out of ram? Will the most rarely used things be moved to swap? And should I turn of swap if I think my system will never need it? Will turning off the swap make my computer faster? And can I even remove the swap partition? And will the hibernation work correctly then?

    Read the article

  • Strange Inode/Ram cache drops happening in CentOS

    - by FunkyChicken
    I run a CentOS 5.7 machine (64bit) with 24GB ram and 4x SAS drives in RAID10 setup. This machine runs nginx/1.0.10, php-fpm & xcache. About a month back the RAM usage of this machine has changed. About every few hours the 'CACHE' is flushed from the RAM, this happens exactly when the 'Inode table usage' drops. I'm pretty sure these drops are related. (see the 2 attached images). This server hosts quite a lot of small files (20M all a few KB big). Not many files are deleted (maybe 100 per hour (total size a few MB max)), not enough to account for the huge Inode table drops. I also have no crons running which could cause these drops. Sar -r output: http://pastebin.com/C4D0B79i My question: Why are these huge RAM/Inode usage drops happening? How can I get Nginx/PHP to use all of my servers RAM?

    Read the article

  • 64bit on core i5 with 2GB DDR3 RAM?

    - by Jacques
    Core i5 2.3 Ghz processor 512mb ATI HD 4570 2GB 1333 RAM 64bit Windows 7 Home Premium. Should I "down-grade" to 32bit? Does running 64bit with only 2GB RAM make the laptop weaker than running 32bit with 2GB RAM or is the performance pretty much the same? Is there any performance benefit to running 64bit with only 2GB RAM? Is there an impact on battery life between 64bit and 32bit. Should I maybe just add another 2GB RAM? Thanks.

    Read the article

  • Ram not working in dual dynamic paging mode

    - by Robin Agrahari
    My motherboard is Intel D865GVHZ I m using 512 mb ram and recently i purchased a 512 mb ram of same company same speed(333) and same manufacturer. but my pc is not booting in dual dynamic paging mode . It is not at all booting and the screen freezes on windows logo screen at start up. i checked installing individual rams one by one and the pc is working with either of the ram installed individually. But wen i install both the pc is not working. One more point i found is my one ram has 8 chips on both sides while the other ram has 4 chips on both sides. Is that the root of the problem ?? plz help sir. in hope robin

    Read the article

  • Invalid Opcode 0000

    - by Mr47
    At random times (usually when watching a movie in XBMC), the computer locks up. I can still sometimes SSH in and get the 'dmesg' output before that locks up too. A hard reboot is usually required to get things going again. I have cut out the date/time/server columns for easier reading, please do ask if these seem relevant omissions... System: Ubuntu 11.04 (2.6.38-8-server) x64 X11 installed with IceWm (and XBMC) Core 2 Duo E8400 @ 3.00GHz 8 GB RAM Asus P5Q premium motherboard Primary harddrive: OCZ Vertex 2 60 GB (SSD) Other harddrives: various 750GB, 1TB, 1.5TB & 2TB (WD & samsung) Any important information I am not supplying is purely a sign of my incompetence in these matters, so please do ask and excuse me for my inabilities... invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_map CPU 0 Modules linked in: parport_pc ppdev vesafb snd_hda_codec_analog tuner_simple tuner_types wm8775 tda9887 tda8290 tea5767 tuner cx25840 ir_lirc_codec lirc_dev snd_hda_intel snd_hda_codec snd_hwdep snd_pcm ir_sony_decoder snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq rc_rc6_mce ivtv ir_jvc_decoder cx2341x i2c_algo_bit v4l2_common mceusb videodev ir_rc6_decoder ir_rc5_decoder snd_timer ir_nec_decoder nvidia(P) btusb bluetooth rc_core v4l2_compat_ioctl32 tveeprom snd_seq_device pata_marvell psmouse shpchp serio_raw snd asus_atk0110 soundcore snd_page_alloc lp parport firewire_ohci firewire_core crc_itu_t r8169 sky2 ahci libahci Pid: 4597, comm: xbmc.bin Tainted: P 2.6.38-8-server #42-Ubuntu System manufacturer P5Q Premium/P5Q Premium RIP: 0010:[<ffffffff8119bc4a>] [<ffffffff8119bc4a>] do_mpage_readpage+0x9a/0x510 RSP: 0018:ffff88021f5a59d8 EFLAGS: 00210246 RAX: 0000000000000020 RBX: ffff88021f5a5ac8 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000015e36fe0 RDI: 0000000000000000 RBP: ffff88021f5a5a98 R08: ffff88021f5a5ac8 R09: ffff88021f5a5b38 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 000000000000b148 R14: 0000000000000001 R15: ffff8802067034b8 FS: 00007f3f34eb1700(0000) GS:ffff8800cfc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007feb8d515000 CR3: 000000021d744000 CR4: 00000000000406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process xbmc.bin (pid: 4597, threadinfo ffff88021f5a4000, task ffff88021f63db80) Stack: ffff88021f5a5a28 ffffffff8116019d ffff88021f5a5b40 0000002000000003 ffff88021f5a5b38 ffff880206703370 ffffea0006d800f8 0000000000000000 ffffea0006d800f8 0000000c811270b5 ffff88021f5a5a68 ffffffff8110bdba Call Trace: [<ffffffff8116019d>] ? mem_cgroup_cache_charge+0xed/0x130 [<ffffffff8110bdba>] ? add_to_page_cache_locked+0xea/0x160 [<ffffffff8119c232>] mpage_readpages+0x102/0x150 [<ffffffff812063e0>] ? ext4_get_block+0x0/0x20 [<ffffffff812063e0>] ? ext4_get_block+0x0/0x20 [<ffffffff81149475>] ? alloc_pages_current+0xa5/0x110 [<ffffffff8120157d>] ext4_readpages+0x1d/0x20 [<ffffffff81116a9b>] __do_page_cache_readahead+0x14b/0x220 [<ffffffff81116ed1>] ra_submit+0x21/0x30 [<ffffffff81116ff5>] ondemand_readahead+0x115/0x230 [<ffffffff811171a0>] page_cache_async_readahead+0x90/0xc0 [<ffffffff8110b184>] ? file_read_actor+0xd4/0x170 [<ffffffff812de72e>] ? radix_tree_lookup_slot+0xe/0x10 [<ffffffff8110c521>] do_generic_file_read.clone.23+0x271/0x450 [<ffffffff8110d1ba>] generic_file_aio_read+0x1ca/0x240 [<ffffffff8100a82e>] ? __switch_to+0x20e/0x2f0 [<ffffffff81164c82>] do_sync_read+0xd2/0x110 [<ffffffff8108b61c>] ? hrtimer_try_to_cancel+0x4c/0xe0 [<ffffffff81279083>] ? security_file_permission+0x93/0xb0 [<ffffffff81164fa1>] ? rw_verify_area+0x61/0xf0 [<ffffffff81165463>] vfs_read+0xc3/0x180 [<ffffffff81165571>] sys_read+0x51/0x90 [<ffffffff8100bfc2>] system_call_fastpath+0x16/0x1b Code: ff ff 48 c7 85 78 ff ff ff 00 00 00 00 49 d3 ee b9 0c 00 00 00 2b 4d 8c 48 8b b2 c8 00 00 00 ba 01 00 00 00 41 0f af c6 49 d3 e5 <0f> 36 4d 8c 4c 01 e8 d3 e2 4c 8d 44 16 ff 48 8b 53 20 49 d3 f8 RIP [<ffffffff8119bc4a>] do_mpage_readpage+0x9a/0x510 RSP <ffff88021f5a59d8> ---[ end trace ac6cd2f4692205a3 ]--- Please note that the error is ALWAYS occuring at do_mpage_readpage+0x9a/0x510 with the same numbers after it. I've tried to come up with the possible meaning of these, but couldn't get any further. I've also noticed that the top block from the call trace is always the following with the exact same numbers: [<ffffffff8116019d>] ? mem_cgroup_cache_charge+0xed/0x130 [<ffffffff8110bdba>] ? add_to_page_cache_locked+0xea/0x160 [<ffffffff8119c232>] mpage_readpages+0x102/0x150 [<ffffffff812063e0>] ? ext4_get_block+0x0/0x20 [<ffffffff812063e0>] ? ext4_get_block+0x0/0x20 Could this indicate a hard drive issue, a RAM issue or something else entirely?

    Read the article

  • Wheres my memory going?

    - by Stu2000
    My machine keeps 'freezing' before eventaully logging out with all the programs exiting. This is rather annoying, and I think its because I keep running out of memory. I am not running any custom software, just netbeans, chrome etc. (Stuff I usually run on other ubuntu computers without issue). For some reason my memory usage is through the roof as seen here, but I can't quite figure out why. Here is a screenshot which may be useful with htop and gnome-system monitor open as user and as root. I notice that my console-kit-daemon is taking up about a gig of 'virtual memory'. Is that normal? Any tips/advice will be helpful. In the meantime I have ordered 2 x 4 gig ram sticks to try and just throw hardware at the issue.

    Read the article

  • PAE on Ubuntu 12.04

    - by JamesStewy
    I am having trouble using PAE on Ubuntu 12.04 LTS 32bit. I recently upgraded from 4 to 8gb of RAM but PAE doesn't appear to have picked this up. When I run "grep --color=always -i PAE /proc/cpuinfo" I get pae in the list. When I run "dmidecode | grep Size | grep MB" Installed Size is 3825 but the Maximum Total Memory Size: 8192 MB. When I check the BIOS it says there is 8192 MB available and the computer fully supports I have followed everything I can find on the internet (including this https://help.ubuntu.com/community/EnablingPAE) and nothing is working. My Computer is a Toshiba Portege m750. It has an Intel Centrino Core 2 Duo processor. Bought in 2009 Thanks, JamesStewy

    Read the article

  • Which powerful laptop, with UK keyboard and 8gb ram

    - by RobinL
    I've been searching high and low for high spec laptops compatible with Ubuntu. The lack of coherent information on the topic is high (considering the number of people who apparently want a good laptop with an OS operating system). So I thought you may have some advice. My requirements: a) has = 8Gb ram b) is compatible with Ubuntu c) has a UK keyboard and charger d) does not cost the Earth Which would you go for? Does anyone have good experience with high-end laptops running Ubuntu? So here's some background research: Samsung Series 7 looks great, but has various problems on Ubuntu, including: poor battery life, touchpad does not work, graphics card not fully supported and sucks power when it does (see [here] and [here], for example). Other options on the [wish list] include: the sensible [Acer] (possibly n.1 choice, but not sure about graphics card compatibility or battery), a nice looking [HP Pavilion dv6-6c56ea], which also has incompatibility issues (see [here] and [here] and check ubuntuforums) And another [Acer] which may be best due to its simplicity and cheapness. Other sub-questions: didn't Dell offer Ubuntu support for decent laptops (above 6Gb ram their offerings are scarce); what about pre-installed options such as those provided by System76? If it weren't for the UK keyboard and charger, I'd probably go for this [amazing-looking] [machine]. Many thanks for any advice, P.s. Apologies for lack of hyperlinks; I'm a noob so only allowed 2 :( All 10 links are available here though for the interested reader :) Robin

    Read the article

  • Black Screen (but with cursor) after wake-up from suspend to RAM

    - by Naseschwarz
    [Lenovo Thinkpad X60] After upgrading to 12.04, first thing I did was get suspend to HDD back, because I don't use my battery a lot. So I did that. After a while (about a week, I upgraded on release, not beta), maybe a week or so, I started getting black screens from time to time after waking it up from suspend to RAM. I never got that problem with suspend to HDD. As it only happens sometimes, I can't reproduce it o.O Sometimes it doesn't happen for a week (daily use, approx 2-6 wake-ups a day), then every single time. The precise symptoms are as follows: normally I got a black screen with my cursor on it, which can be moved, no problems there. I can't interact with the system in any way except for turning it off on the 1/0 button... the weird thing is, the cursor seems to react to what I had opened when going into suspend to RAM, so for instance one day I had writer open and then my cursor was a "I" for most of the screen. I only get this in 12.04, never had any problems with this in 9.04-11.10. Any ideas? Big thx in advance!

    Read the article

  • Xen dom0 reports incorrect amount of RAM with dom0_mem set

    - by xen_amnesiac
    I've done a fair bit of searching about this, but have found nothing that answers my question. I have a system with 6GB of RAM which acts as a Xen server. For reference, it runs Ubuntu 12.04. I've set the kernel parameter dom0_mem:512M,max:512M in /etc/default/grub as follows: GRUB_CMDLINE_XEN_DEFAULT="dom0_mem=min:512M,max:512M" I've tried variations of that, with the same result. My question is this: With the above set, the dom0 reports in all applications a RAM amount of 422M. cat /proc/meminfo gives the following: $ cat /proc/meminfo MemTotal: 432472 kB MemFree: 54144 kB Buffers: 17640 kB Cached: 220104 kB SwapCached: 30172 kB Active: 136500 kB Inactive: 167780 kB Active(anon): 6156 kB Inactive(anon): 60516 kB Active(file): 130344 kB Inactive(file): 107264 kB Unevictable: 52 kB Mlocked: 52 kB SwapTotal: 1794044 kB SwapFree: 1682012 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 39572 kB Mapped: 8048 kB Shmem: 136 kB Slab: 44324 kB SReclaimable: 22012 kB SUnreclaim: 22312 kB KernelStack: 1280 kB PageTables: 3840 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2010280 kB Committed_AS: 329192 kB VmallocTotal: 34359738367 kB VmallocUsed: 313988 kB VmallocChunk: 34359417340 kB HardwareCorrupted: 0 kB AnonHugePages: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 524696 kB DirectMap2M: 0 kB top, htop, free -m, and byobu's RAM monitor all report the same amount. At first I thought this was because of the onboard graphics borrowing some memory, but have now switched to a dedicated GPU and it persists. Is this normal behavior, or has something gone amiss? It's just about 100MB of RAM that's "gone", and I have no idea where it went. I understand that it's normal that not all RAM is available for allocation, but does the system really take an amount relatively high to the amount of RAM available?

    Read the article

  • S5000XVN Intel Motherboard - Only sees 12 out of 16GB of RAM

    - by Richie086
    So I have an older Intel S5000XVN motherboard, here are the specs CPU Arch : 2 CPU - 2 Cores - 2 Threads CPU PSN : Intel Xeon CPU 5160 @ 3.00GHz CPU EXT : MMX, SSE (1, 2, 3, 3S), EM64T, VT-x CPUID : 6.F.6 / Extended : 6.F CPU Cache : L1 : 2 x 32 / 2 x 32 KB - L2 : 4096 KB Core : Woodcrest (65 nm) / Stepping : B2 Freq : 2985.21 MHz (331.69 * 9) MB Brand : Intel MB Model : S5000XVN NB : Intel 5000X rev 31 SB : Intel 6321ESB rev 09 RAM : 16384 MB FB-DDR2 RAM Speed : 331.7 MHz (1:1) @ N/A Slot 1 : 2048MB (5300) Slot 1 Manufacturer : Kingston Slot 2 : 2048MB (5300) Slot 2 Manufacturer : Qimonda Slot 3 : 2048MB (5300) Slot 3 Manufacturer : Kingston Slot 4 : 2048MB (5300) Slot 4 Manufacturer : Qimonda Slot 5 : 2048MB (5300) Slot 5 Manufacturer : Kingston Slot 6 : 2048MB (5300) Slot 6 Manufacturer : Qimonda As you can clearly see, CPU-Z says I have 16GB of PC2-5300 RAM installed. For some reason in both BIOS and in Windows the maximum usable RAM is 12GB instead of 16GB. I have a dedicated video card connnected, so it can't be stealing RAM to use for the GPU (the S5000XVN does not have any onboard video). I am running Windows Server 2008 R2 x64 as the primary OS - so there should not be a memory limitation imposed on me from the OS. Has anyone experienced this before? Any ideas on how I can actually use all 16GB of RAM? I plan on using this machine to use for a Hyper-V server and have x2 Quad Core Xeon CPUs on the way as I write this post.

    Read the article

  • PC can't detect second RAM installed

    - by kulwinder
    I have PC with 512 MB RAM installed (motherboard manufacture MICRO STAR, chipset P4M800), pc was running very slow so I decided to upgrade the ram. I installed CPU-Z and check the ram installed on the machine, also had a look at the stick installed. 512 MB PC 3200 400 MHz DDR but my mother supports 200 MHz and it was working ok. So I bought 2GB which I checked on manual that it support upto 2 GB Ram. So I installed 2GB PC 3200 400 MHz same as the old one, I plugged in both eventhough motherboard only support upto 2 GB but system spec only shows 512 (deducts 64 MB shared vga memory) I checked on CPU-Z, it detects both, slot 1 512 MB, slot 2 2048 MB, comparing screen for both slots, both the same, volt 2.5, frequency 166 MHz and 200MHz, only difference on those is 2gb ram shows under timings table 133MHz 166 MHz and 200MHz but 512 MB shows only 166MHz and 200MHz. I checked on Google and can't seems to figure out whats wrong with it. If I only plug in 2GB. Pc doesn't boot up like ram not working.With only 512 MB plugged in seems ok. Please help.

    Read the article

  • Two Firefox windows vs two browsers? Ram Consumption

    - by Kayle
    I don't know enough about Ram & sharing to know what the difference is here. Normally, I run Chrome in one desktop for personal use, and Firefox on a second desktop for business. I like the separation of saved passwords and whatnot. However, I recently learned that I can open two different profiles in Firefox at the same time, so I was wondering if that would be cheaper to my system resources, or not? Out the door, I don't think it would save more than 40-60mb of ram... but I'm wondering, 3 hours later, if ram handling will be better using just one browser for all my heavy lifting. I only have 2gb of ram and I run iTunes and Photoshop as well, almost all day. So I like to save ram where I can. Any thoughts? UPDATE: I've been centering around chrome more recently and using firefox for testing. Dev isn't bad on Chrome and it's great at releasing memory when I close tabs. In retrospect, I think the best answer to this question is simply for me to buy another 2gb of ram.

    Read the article

  • Computer slow after installing 32GB RAM

    - by John Gilmore
    I'm currently running very large network simulations for my PhD research, for which I need lots of RAM. I have a Core i7 2600K processor with a Gigabyte GA-Z68AP-D3 motherboard, running Windows 7 professional 64bit. I bought the system with 8GB (2x4GB) DDR3 1600 MHz Corsair Vengeance RAM and the system ran like a dream. I'm planning to upscale my simulations so I removed the 2x4GB RAM and installed 4x8GB DDR 1600 MHz Corsair Vengeance RAM. When I rebooted the system, boot time was much longer than usual (10 mins just to get to login screen). After logging in, the whole system was unresponsive. I tried playing some games (Bioshock 2), but it was unplayable. I've not had this problem before and I have an ATI Radeon HD 5850 graphics card, so that's not the problem. The only thing that's changed is the RAM. I've looked through the specifications of Windows, my motherboard and my CPU and they all state that 32GB of RAM is supported. Does anyone have an idea of what's going on? Any help would be greatly appreciated.

    Read the article

  • Laptop won't boot with both memory slots used

    - by Johnny W
    I'm currently trying to upgrade my old Sony Vaio VGN-SZ1HP/B to 2GB of RAM. It already had 1GB of Crucial RAM in one of its slots, and one empty. I checked on Crucial.com and it confirms that each bank can hold 1GB of PC2-5300. The 1GB stick already installed was this, but Crucial's page recommended this... The two are identical from what I can make out, so I just ordered another one of the former. Unfortunately the machine refuses to even POST with both sticks installed. If I remove the old RAM from Slot 1 and replace it with the new RAM it runs fine. If I leave Slot 1 empty and put RAM (either stick) in Slot 2, it won't POST. Basically it seems that Slot 2 just isn't working properly. Does anyone have any ideas on how to solve this problem? Or maybe have any experience with this sort of thing with Sony Vaios? Thanks for any help!

    Read the article

  • Can you tell DDR and DDR2 apart visually?

    - by Macha
    I'm getting a few old computers to take apart for parts soon. Most of them are defintely using DDR2 RAM, but there is the possibility that one or two of them are using DDR RAM. Since these are quite old, the manuals have since been lost. Is it possible to tell DDR and DDR2 RAM apart visually, and if so how?

    Read the article

  • Computer keeps restarting [closed]

    - by Joris
    I have a strange problem with my desktop pc, when I start it, it just restarts immediately, it displays the bios/motherboard logo and then restarts. I can't access the bios to edit settings because it restarts to fast. Then I tried different things to fix it with mixed success. (I also tried to reset the bios without success) I noticed that a capacity from the graphics card was broken (it looked exploded) so I ordered a new graphics card & plugged it in the computer. It didn't change much, still the same problem. Then I unplugged everything that's not necessary and put only 1Gig RAM in the motherboard (usually it has 4 x 1Gig RAM) and the computer started, then I putted another gig of RAM and the computer still started. (starting=booting windows) When I putted in the 3th RAM it didn't boot anymore (again restarting all the time) so I removed this 3th gig of RAM and this is where it gets weird. I expected the computer to boot again because it is exactly the same configuration as before - which worked - but the computer didn't want to start. It just gave the same problem as before (restarting all the time.. ) Anyone an idea what might be wrong?

    Read the article

  • Lubuntu 12.04 on Acer laptop boots to blank blue screen

    - by WGCman
    My previous question on this was closed, but I am posting it again as the solution which my son eventually found may assist other users of the forum, or someone may be able to tweak the solution to improve the performance. Having installed Kubuntu 12.04.01 from a live USB onto my desktop, I wanted to do the same on my laptop, an Acer Aspire 1362 Laptop, which has 256MB RAM (actually 512 "on the box", but a good deal can be borrowed by the graphics!). I found Kubuntu wouldn't run on so little memory but downloaded: Lubuntu-12.04-alternate-i386.iso, which I understood was light enough to go. The laptop has one internal 40GB Toshiba hard drive divided into 3 partitions: C,19GB with Windows XP, Windows program files and some data, D, 19GB mostly data, and a small 2GB partition with some Acer software, which XP can't normally “see”. I transferred most of the contents of D to a memory stick, leaving 16GB free for Lubuntu. I did not want to dump XP yet, though it is painfully slow. I installed Lubuntu from then USB stick, accepting the default answers to most of the questions. The D: partition was further partitioned into a 500MB boot partition, 10GB for Linux, 2GB Swap and 6GB for data shareable between Linux and Windows. I had no error messages during installation, rebooted, was offered the choice of Ubuntu or XP, and selected the former. After a few minutes, I get a dark blue screen announcing Lubuntu with five dots underneath which lighten in turn. Eventually the lights stopped, and whatever I try the screen remains blank apart from “Lubuntu” I tried several solutions suggested on the forum for “identical” questions but without success.

    Read the article

  • wake up from suspend to ram problem

    - by Pupizoid
    I have very strange problem. After suspending to ram notebook doesn't wakes up, only leds and fan switches on, no HDD activity and display stays off(without backlights-completly off). If I press numlock- led doesn't switches, all buttons are not warkable. I have installed uswsusp and tryed to use s2ram, but result is exactly similar. I tryed to remove fglrx, but useless. I have HP Pavilion dv6 2055er with Ubuntu 12.04 on board and: 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV710 [Mobility Radeon HD 4500/5100 Series] How can I solve this problem?

    Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >