Search Results

Search found 2471 results on 99 pages for 'tyler smart'.

Page 8/99 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

• HP ML115 with P400 Smart Array Controller

  - by John

  Hi, I have a HP ML115 server I have installed a HP P400 Smart Array Controller card, I also have 4 x 1TB Samsung Hard drives. I'm unable to get the the controller to detect the hard drives, I have changed the drives to SATA 1.5G without luck, I have also tried connecting a single 80GB Maxtor drive without luck The controller shows up just after boot and tries to initialize, The controller does not show up in the POST prompt, although I can see the controller when booting off a ACU CD THe controller firmware is a little old v4.12 but I have no way to update it. Any ideas on how I can get this going?

  Read the article

• RAID Array performance on an HP Proliant ML350 G5 Smart Array E200i

  - by Nate Pinchot

  We have a client who is complaining about performance of an application which utilizes an MS SQL database. They do not believe the performance issues are the fault of the application itself. The Smart Array E200i RAID controller has 128MB cache and we have the cache set to 75% read/25% write. The disk array set to enable write caching. Recently we ran a disk performance test using SQLIO based on this guide. We used a 10 GB file for the test found that the average sequential read rate was ~60 MB/sec (megabytes/sec) and the average random read rate was ~30 MB/sec. Are these numbers on par for what the server should be performing? Better than on par? Horrible? Amazing?

  Read the article

• Disabling RAID feature on HP Smart Array P400

  - by Arie K

  I'm planning to use ZFS on my system (HP ML370 G5, Smart Array P400, 8 SAS disk). I want ZFS to manage all disks individually, so it can utilize better scheduling (i.e. I want to use software RAID feature in ZFS). The problem is, I can't find a way to disable RAID feature on the RAID controller. Right now, the controller aggregates all of the disks into one big RAID-5 volume. So ZFS can't see individual disk. Is there any way to acomplish this setup?

  Read the article

• Can't connect to exchange thru my smart phone

  - by Hoorayo

  We just moved Exchange server from our company to Local data center. Everything is working except mobile access. There is no problem with receiving and sending email from outlook of my laptop, but I can’t connect to exchange server from my smart phone to receive email. While I am setting up exchange account for my phone(Google) , it recognizes when I put wrong password. But it says “Unable to open connection to server” with right password and ID. Is there any option for IP address for this service when I move my server to different location? Please, help me out for any clue.

  Read the article

• Exchange 2013 Internal Relay via Smart Host

  - by Matt Clements

  Thank you for your help in advance! I am currently setting up an Exchange 2013 server, to replace our old POP3/SMTP system, however we would like to roll this out gradually when convenient for our staff. Our plan is therefore: Setup Exchange 2013 to retrieve email via POP Connector - Done Setup Exchange 2013 to send ALL mail via a SmartHost - Issues I have set the domains in Mail Flow Accepted Domains to Internal Relay, enabled a Smart Host for * as the domain name, and disabled/deleted the accounts that are not setup yet; however Exchange just bounces the emails with no errors.

  Read the article

• Single hardware unit to protect web servers and implement smart publishing

  - by Maxim V. Pavlov

  Thus far we've been using the combination of Forefront TMG 2010 as an edge firewall + intrusion prevention system + web site publishing mechanism in the data center to work with a few web server machines. Since we develop on ASP.NET, we are IIS and in general - Microsoft crowd. Since TMG is being deprecated, we need to come up with a hardware alternative to protect and serve our data center web cloud. Could you please advise a hardware or virtual appliance solution that can provide routing, flood prevention and smart web-site publishing (one IP - many web sites based on domain name filter) all in one. Even if it is hard to configure, as long as it covers all these features, we will invest to learn and replace TMG eventually.

  Read the article

• Elan Smart Pad - empty settings window

  - by Quarien

  I am using my Asus UL30JT with Windows 8. I installed Elan Smart-pad driver 11.14.1.3. It basically works just fine, I have all the gestures and stuff. However, to adjust the settings I have to launch regedit.exe, because the window appears to be broken. Under Mouse - Elan Tab - Options I see this: Do you know how to fix that? Also, if you have a similar program, can you at least send me screens of what I can change? As I said, I am editing registry right now and I need some guidance what I can actually do :)

  Read the article

• Private Git repo using Smart HTTP with LDAP authentification

  - by ALOToverflow

  I've been crawling the interwebz and getting my hands dirty for the last few days, but I can't seem to make it all work together. I managed to get a HTTP repo working with Ubuntu 10.04 over Smart HTTP (pull and push over HTTP) for a single repo. This means that I do the initial setup over SSH to the server (git init --bare) and after that the clients can pull and push to it (git clone http://servername/allgitrepos/repo.git). Unfortunately it's impossible to add a new repo without SSHing to the server and adding it manually) i.e. git push http://servername/allgitrepos/repo2.git (allgitrepos is available for everyone to read-write and execute) would fail talking about git update-server-info (which seems to be a general error message). So far the repository is anonymous, so I would like to authenticate using LDAP and also use the LDAP creds to make the git commit. So, how can I push new repos to the server and how can I use the LDAP creds to make the git commit. Thanks

  Read the article

• VS2010 Extension like Smart Paster?

  - by Eric J.

  Alex Papadimoulis' Smart Paster is a great little tool that can paste text in programmer-friendly ways (e.g. as a StringBuilder, as a language-specific string literal, etc.). However, it doesn't seem to be available for VS2010. Anyone know of a similar extension or of plans to port Smart Paster?

  Read the article

• Performance Testing a .NET Smart Client Application (.NET ClickOnce technology)

  - by jn29098

  Has anyone ever had to run performance tests on a ClickOnce application? I have engaged with a vendor who had trouble setting up their toolset with our software because it is Smart Client based. They are understandably more geared toward purely browser-based applications. I wonder if anyone has had to tackle this before and if so would you recommend any vendors who use industry standard tools such as Load Runner (which i assume can handle the smart client)? Thanks

  Read the article

• sharepoint (moss 2010) and smart parts

  - by Ali

  having our moss 2007 all our developments and customizations were based on smartparts everything in our sharepoint are smartparts (some smartparts using jquery) but i couldn't find the smart part plugin for moss 2010, is it possible to use our existing smart parts in moss 2007 in a new installation of moss 2010

  Read the article

• VS2008 Smart Device Class Library Project Template

  - by Nelson Reis

  I was trying to create a new Class Library project targeted for the .NET Compact Framework. However, when I select "New project - Smart Device" I only have the Smart Device Project template. I've checked the folder: C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE\ProjectTemplates\CSharp\SmartDevice\1033 It contains several project templates: SmartDeviceClassLibrary SmartDeviceConsoleApplication SmartDeviceEmptyProject SmartDeviceWindowsApplication SmartDeviceWindowsControlLibrary None of those are shown on my IDE. How can I use one of those project templates?

  Read the article

• Smart Paster Add-In for Visual Studio 2010

  - by Nelson Reis

  Does anyone know of any free add-in similar to Smart Paster, but for Visual Studio 2010? Unfortunately, Smart Paster only works for VS2005 and VS2008. For the ones that don't know what I'm talking about, check it out.

  Read the article

• Samsung introduces smart watch. But without any smartness!

  - by Gopinath

  The era of mobile phone can be classified as before iPhone and after iPhone. When iPhone was introduced they were revolutionary, smart, awesome and technologically far advanced than any other phone available in the market. iPhone is the first true smartphone and a game changer. With the same goal in mind, Samsung tried revolutionizing watch industry by announcing Galaxy Gear watches. They branded them as a smart watch, hyped its release as if it’s going to revolutionize the way we use watches. But in reality there is nothing exciting about it. Instead it’s an expensive (300$) one, battery lasts less than a day, user interface is very very slow, has small memory capacity, not much of use if not connected to a Samsung phone!! With so many negative, how can it be a smart watch? Reviews on Galaxy Gear smart watch The Next Web Smartwatches are still too dumb The Verge Samsung’s Galaxy Gear isn’t really a smartwatch Gizmodo $300 is a lot for a souped up fitness tracker, and as far as the basic smartphone functions Galaxy Gear is capable of, those feel a little strange and counterintuitive ZD NET Samsung has left the door wide open with the Galaxy Gear, which looks both rushed and exorbitantly priced at the same time. Few Tweets on Galaxy Gear 1. Apple surprises with iPhone 2. Tablet rumors 3. Others rush crap to market 4. iPad 5. ‘iWatch’ Rumors 6. Others rush crap to market 7. ? — Matthew Panzarino (@panzer) September 4, 2013 Camera, phone, music… There’s one thing that the Gear doesn’t seem to have: a purpose | http://t.co/raK4Rgy6Fm by @SamGrobart — Businessweek (@BW) September 5, 2013   Galaxy Gear Video demo shows how slow it is Here is a Galaxy Gear hands on video from slashgear. You can see how slow the device performs   With the rumors of Apple building smart watch, Samsung rushed to the market with its own version of (smart) watch as a preemptive strike. But with a half baked product and without any innovation it back fired on it own reputation. This would’ve been great chance to Samsung to prove that the company is innovative and not a copy cat. But it failed to innovate and missed a chance.

  Read the article

• E3 2012 : Du nouveau pour la XBox 360 : l'application Smart Glass, Internet Explorer et XBox Music débarqueront cette année

  E3 2012 : Des nouveautés pour la XBox 360 Smart Glass, Internet Explorer et Music Smart GlassIl faut dire que pour l'instant, peu de choses ont été dévoilées à propos de Smart Glass. Sous ce nom se cache une application pour Windows 8, Windows Phone mais aussi les périphériques sous iOS afin de les utiliser comme contrôleur pour la XBox. La technologie permettra d'utiliser son PC, sa tablette ou son smartphone, pour afficher l'image mais aussi pour contrôler la XBox, donnant ainsi une meilleure interface utilisateur pour des applications comme Internet Explorer. De plus, The Verge

  Read the article

• Slow parity initialization of RAID-5 array on HP Smart Array 411 controller

  - by Rob Nicholson

  On 29th October 2011, I built a RAID-5 array using 4 x 146.8GB Seagate SAS ST3146855SS drives running at 15k connected to a PowerEdge R515 with HP Smart Array P411 controller running Windows 2008 (so nothing particularly unusual). I know that parity initialisation of a RAID-5 array can take some time but it's still running after 2.5 weeks which seems a little unusual. I'd previously built another array on the same controller using 4 x 2TB SATA-2 drives and that did take a while to complete but a) I'm sure it was less than 2.5 weeks, b) that array was ~12 times bigger and c) during initialization, the percentrage slowly increased each day. At the moment, the status display for this new 2nd array simply says "Parity Initialization Status: In Progress" and it's said that since the start. It's this lack of change on the status that worries me the most - feels like it's not actually doing anything. Do you think something has gone wrong or am I being unpatient and for some reason, the status not increasing is normal? I kind of expected a much smaller array on faster drives (15k SAS versus 7.5k SATA-2) to build in a few days. This is our primary SAN running StarWind so my "have a play" options are very limited. This 2nd array is currently in use for one small virtual disk so I could shut the target machine down, move the virtual disk to another drive and try rebuilding.

  Read the article

• Mac Outlook showing all links in smart quotes?

  - by user2727128

  I was given the task of fixing my friend's email today and really don't know what the problem is. When an email is sent from his laptop (Mac) from Outlook the email address link in the signature shows exactly like this: [email protected]<mailto:[email protected]>. Additionally the website link displays like this: www.website.com<http://www.website.com>. And lastly, the image comes through as cid:randomstringofnumbers. When I sent him an email and he sent one back it converted my signature to same weird formatting. Plus, even in the header where it shows our emails, they are displaying the same way: [email protected]<mailto:[email protected]>. And the weirdest thing is that this problem seems to be "compounding". So when I scroll down to the last, most recent email in the thread I see this www.website.com<http://www.website.com> next email shows this: www.website.com<http://www.website.com><http://www.website.com> and the next this: www.website.com<http://www.website.com><http://www.website.com><http://www.website.com> This is happening to the emails too, everywhere. I'm thinking this might be something to do with smart quotes and the auto formatting but I'm not sure. Could this be the problem? And if so how do I fix it?

  Read the article

• How to do this in a smart way

  - by Azzyh

  Hello SO. My websystem im coding with now is integrated from the originally phpBB system. With this i mean when you log on my websystem, you have actually logged into the forum from the login page. Now i came to the "log out" part, and i want to make it smart. Right now its a simply link with logout: <a href="<?php echo BASEDIR; ?>../../ucp.php?mode=logout&sid=<? echo $user->data['session_id']; ?>" style="margin-left: 14px; font-size: 10px;">- Log Out</a> As you see in the link it refers to the forum´s ucp.php?mode=logout, and you need to have the SID variable in it in order to log out right.. anyway.. I want to do this log out part in a smart way, i mean, not so you land on the forum´s "you have now been logged out", i want something maybe like run this page in background when you click, and then it refreshes the current page your on. Or should it be smarter just try to modify the phpbb file ucp.php? I think its hard coded, and not the way I am coding, so thats why i find it abit tricky. Thank you for your answers and examples on how this could be done, in a smart way..

  Read the article

• Utilities Worldwide Succeed with Oracle Utilities Applications

  - by caroline.yu

  More than 50 utilities worldwide have selected or implemented Oracle Utilities applications in the current fiscal year to date to respond to environmental imperatives, adapt to changing business conditions, meet and exceed customer expectations, implement smart grid components and address operational issues. Customers who have recently selected or implemented Oracle Utilities applications include: Acea Distribuzione, California Water Service Company, City of Winnipeg, Denver Water, Enersource Hydro, GasTerra, Modesto Irrigation District, Rappahannock Electric Cooperative, San Francisco Public Utilities Commission and Western Power. "Around the world, utilities are under pressure to address customer demands, improve environmental quality and comply with regulatory requirements. Oracle Utilities provides a choice of mission-critical applications to deliver tangible business results. Our recent traction in the industry illustrates the solid value we bring to our customers," said Stephan Scholl, senior vice president and general manager, Oracle Utilities.

  Read the article

• Intel Rapid Storage / Smart Response SSD caching issue

  - by goober

  Background Recently built my own PC. It works! Almost. It's been a while since getting into the guts of these things, so I'm familiar but may be missing something simple. FYI, I don't care about blowing the OS away -- it's brand new and we can go back from scratch as many times as necessary. Goal / Issue I'd like to use the SSD to take advantage of Intel's Smart Response technology (allows the SSD to act as a cache for HDDs) I would like the SSD cache to act as a cache for my HDDs, which I would like to be in a RAID1 array (so I get the speed from the SSD and the redundancy from the RAID1) However, Windows only sees the drive in device manager (not as a drive), so I'm unsure what to do about that. Related: as far as I know, for this to work, the drives all have to be in a single RAID array (i.e. a RAID0 pairing of the SSD and the RAID1 HDD array). However, when attempting this at the BIOS level, I am told there is not enough space for an array. Steps so Far Moved the SSD onto the Intel controller (I'd had it on the Marvel 6.0 controller instead of the Intel controller, so the BIOS was only seeing it in a strange way) Updated the BIOS of the motherboard to the latest version Reinstalled Intel's RST (iRST?) software several times, as some forums reported it working after reinstalling 3 times (which does not inspire confidence). Checked Intel storage: it does see the SSD as a physical, non-RAID device. However, it says no space exists if I try to create an array. Checked the BIOS: it does not show up in the boot order, but is an option that can be selected under boot options. Tried the firmware update for that model. Issue: the firmware CD doesn't detect a drive; maybe the Intel storage controller is making it difficult? moved the ssd to the marvel controller. The firmware update cd appeared to hang while searching for drives. swapped out the SATA cable for the manufacturer's and moved back to the intel storage controller. Noticed at this point that in the Intel RST software, a device DOES show up in addition to the RAID set -- only shown as a "60 GB internal disk". Windows doesn't appear to see it as a drive, but it does still show in device manager. Move SSD to port from 0-3 on MOBO and set SATA mode to IDE (after disconnecting RAID1 config) to allow the firmware update to work. Firmware was already at the latest version. Next Steps ? Components involved ASUS P8Z68-V PRO motherboard (Intel Z68 Chipset) Intel i7 2600k Processor 2 x 1TB 7200 RPM HDDs 64 GB Crucial M4 SSD (M4-CT064M4SSD2) For Reference -- Storage Configuration Intel 3 gbps Intel 3gbps Intel 6gbps Marvel 6gbps +----------+ +----------+ +----------+ +----------+ | | <----+ | | +-+ | | | |----------| | |----------| |-|--------| |----------| | | | | + | | | | | | +----------+ | +--|-------+ +-|--------+ +----------+ | | | + v v | 1 TB HDD 64 GB SSD + +> 1 TB HDD For Reference -- Intel RST (v10.8.0.1003) Screenshot Don't mind the "rebuilding" -- knocked a power cable out at one point; it's doing its job, not an indicator of a bad HDD. Any thoughts? Thanks in advance for any help!

  Read the article

• Hard drive had reallocated sectors...but now it magically doesn't! Can I trust it?

  - by rob

  Last week my SMART diagnostics utility, CrystalDiskInfo, reported that the external hard drive that I was saving my backups to had suddenly reported 900+ reallocated sectors. I double-checked to confirm, then ordered a replacement drive. I spent all of this week copying data from that drive to the new drive. But toward the end of the copy, something peculiar happened. CrystalDiskInfo popped up an alert that the reallocated sector count had gone back down to 0. I know that when SMART detects a read error on a block, it adds that block to the current pending reallocation list. If it subsequently is successfully written or read later, it is removed from the list and assumed to be fine, but if a subsequent write fails, it is marked bad and added to the reallocated sector count. What concerns me most is that I've never read anywhere that a sector can be recovered as "good" after it has been marked as a bad sector and remapped. I've just finished running an extended SMART diagnostic, and it found no surface errors. Now I'm doubtful that the manufacturer will honor a warranty claim if the SMART info does not report any problems. Has anyone had this happen? If so, then is the drive, indeed, okay, or should I be concerned about an imminent failure?

  Read the article

• Embedding IWebbrowser2 ATL interface control in C# windows mobile smart device application

  - by Ramanand Bhat

  Hi All, We have developed an ATL smart device project for to save the web page locally in windows mobile device. The application uses native IWebbrowser2 ATL interface control to browse the web page and save the web page complete. Now we need to have our UI and other user interface controls to be designed and developed using C# also we have some UI module already available in C#. So please provide us a method to embed native IWebbrowser2 ATL interface control to the C# smart device project. your feedback will be greatly appreciated. Thanks, Ramanand Bhat.

  Read the article

• How to "smart resize" a displayed image to original aspect ratio

  - by Paul Sasik

  I have an application in which end-users can size and position images in a designer. Since the spec calls for the image to be "stretched" to the containing control, the end user can end up with an awkwardly stretched image. To help the user with image sizing I am thinking of implementing a smart resizer function which would allow the the user to easily fix the aspect ratio of the picture so that it no longer appears stretched. The quick way to solve this is to actually provide two options: 1) scale from width 2) scale from height. The user chooses the method and the algorithm adjusts the size of the picture by using the original aspect ratio. For example: A picture is displayed as 200x200 on the designer but the original image is 1024x768 pixels. The user chooses "Smart Size from width" and the new size becomes ~200x150 since the original aspect ratio is ~1.333 That's OK, but how could I make the algorithm smarter and not bother the user by asking which dimension the recalculation should be based on?

  Read the article

• Key stroke time in Openmoko or any smart phones

  - by Adi

  Dear all, I am doing a project in which I am working on security issues related to smart phones. I want to develop an authentication scheme which is based on biometrics, Every human being have a unique key-hold time,digraph time error rate. Key-Hold Time : Time difference between pressing and releasing a key . Digraph Time : Time difference between releasing one and pressing next one. Error Rate : No of times backspace is pressed. I got these metrics from a paper "Keystroke-based User Identification on Smart Phones" by Saira Zahid1, Muhammad Shahzad1, Syed Ali Khayam1,2, Muddassar Farooq1. I was planning to get the datasets to test my algorithm from openmoko phone, but the phone is mis-behaving and I am finding trouble in generating these time data-sets. If anyone can help me or tell me a good source of data sets for the 3 metrics I defined, it will be a great help. Thanks Aditya

  Read the article

• Smart auto-completition for staged git file names, used with difftool

  - by piobyz

  I'd like to have a smart auto-completition of currently staged file names when using git diff. Example: modified: DIR1/LongCamelCaseFileName.h modified: DIR1/AnotherLongCamelCaseFileName.m modified: DIR1/AndThereAreALotOfThemInDir1.m modified: DIR2/file4.m and here, using bash tab-auto-complete functionality I'd like to use it with git diff where by smart I mean that after typing git diff I'd need to type only a short part of the staged file name that I want to diff, and without a dirname, so for example git diff And<TAB> would result in git diff AndThereAreALotOfThemInDir1.m Actually, without a dir-ommiting-part it would be still useful (auto-completing using only staged files pool).

  Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >