Search Results

Search found 9649 results on 386 pages for 'usb audio'.

Page 8/386 | < Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >

  • Need help with exploring a USB drive

    - by Bob Getsla
    When I plug in a USB drive, I see it on the left hand edge of the Unity desktop (11.10, 64 bit) but when I try to explore it, VLC starts and tries to play whatever it can find in the USB drive. This behavior began when I updated from 11.04 to 11.10. I literally cannot look into the contents of any of the USB drives I have, because I cannot stop VLC, nor can I do anything when I click Open other than watch VLC start up. This is very frustrating because it makes my USB sticks essentially useless. HELP! I'm sure that there is something a wizard could do about this, but I am not a wizard, and I am at my wits ends. Trying to get to the System Settings menu works, and I can see the setup for "Removable" devices, and they are all set to "Ask" but that is clearly not what is happening. So it looks like I must reach for the command line, but where do I go to find the settings for what the desktop does when I plug in a USB drive and wish to explore the file structure in it and possible copy a file into the USB or from the USB drive. Right now, VLC media player is always getting in my way. :-(

    Read the article

  • Impossible to boot Ubuntu on a USB stick (OS X Montain Lion)

    - by user109513
    I know this has been discussed over and over but I still cannot run Ubuntu on a USB stick. Here's the step I followed: 1. I downloaded Ubuntu 12.10 (ubuntu-12.10-desktop-i386.iso) from http://www.ubuntu.com/download/desktop which I renamed 'ubuntu.iso'. I bought my Mac mid-2010, it has an Intel processor. 2. I formated my 16GB USB stick with HFS+ File System following this tutorial: http://www.switchingtomac.com/tutorials/how-to-format-a-drive-or-partition-with-the-hfs-file-system 3. I opened a terminal and typed: hdiutil convert -format UDRW -o ~/Downloads/ubuntu.img ~/Downloads/ubuntu.iso It created ubuntu.iso.dmg 4. I ran 'diskutil list' and identified the device node assigned to the USB. 5. I unmounted it: diskutil unmountDisk /dev/disk2 6. Then, I entered the command: sudo dd if=~/Downloads/ubuntu.img.dmg of=/dev/rdisk2 bs=1m. It seemed to work. A Mac message poped up saying that the system doesn't recognized the disk, I pressed 'ignore'. 7. I ejected the USB using diskutil eject /dev/disk2, then removed the USB. 8. I rebooted the computer, plugged the USB key, pressed ALT.I could see my Macintosh partition and my Windows partition, but couldn't see my USB stick. Any help will be very appreciated :) Victor

    Read the article

  • Automatic syncing USB HD drive to local HD (different computers)

    - by luri
    I have a desktop PC at work, and a laptop at home.... or elsewhere. What I want to do is use a USB HD to store my documents (about 130 Gb, maybe more). That would serve as backup and also port my files to my laptop. I'd like any of both computers to automatically sync all files there with local copies, so that I can work at either of them and keep updated copies of everything in both (plus the USB drive, which would allow me to work in other computers, too, apart from being another backup). Dropbox ins't a solution for me, due to pricing and 100Gb limit. The workflow would be as follows, to clear things up: I work on PC1. Changes in files are automatically synced to USB whenever a file is modified. I go home and boot PC2. I plug the usb drive and local files are synced (if changed) with the most recent usb copies. While I work at PC2, again, changes in files spread to my USB drive. Whenever I go to PC1 again, I plug my usb and again everything synces. So the questions would be: a) Am I crazy? b) Can it be done? c) Will I have any file conflicts (provided I'm the only one that will modify the files)?

    Read the article

  • Slow USB 3.0 speeds

    - by Cygnus X
    Long time forum forager, first time poster. I bought a Toshiba 500 GB usb 3.0 hard drive last week and instantly ran home to see how fast I could push it. On my desktop (that I built) I was able to get 200 MB/sec. On my laptop (MSI FX something or other), which I dual boot Windows 7/Ubuntu 11.10, I was able to get about 120 MB/sec on Windows, but on Ubuntu, i get about 25 MB/sec. lsusb shows: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0bda:0139 Realtek Semiconductor Corp. Bus 002 Device 003: ID 1532:0015 Razer USA, Ltd Bus 004 Device 002: ID 0480:a007 Toshiba America Info. Systems, Inc. lspci -vvv shows that the USB 3.0 host controller is using the kernel driver in use is xhci_hcd. dmesg |grep usb shows: [ 1815.455368] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1815.475459] scsi7 : usb-storage 4-1:1.0 The built in disk utility says its connected via usb at 705 MB/s, but that's not what it reports when I transfer files over to it. Not really sure what to do at this point. Any help would be very nice, thank you.

    Read the article

  • Looking for cheap Wireless router, with USB for attached USB disk drive

    - by geoffc
    I have a 802.11b router at home (DLink DI-614+ (B rev)) and it is working perfectly well for me. I want to replace it though, since it is out of updates, and now several years old and heck, I want a new toy to configure! I was trying to decide what to get. I could care less about 802.11g or n support, since B is fast enough, but every device in my house is now B/G, so G would be fine for me. N buys me little to nothing. (Small enough house that range is a non-issue). The features I realized I want are a USB port for sharing a USB hard drive. I would like to have a central device I could store files on. I do not want to waste the power of an always running PC to do this, so a router seems like the place to go. I would love it, if it could support Vonage VOIP as well, then I could ditch a power brick from a second device (I have the small DLink Vonage VOIP box). All the current examples of this router (with USB drive, yet to find one with VOIP too!) are in the $100+ range, and N and silly, when a B/G is in the $30 range around here.

    Read the article

  • Fetch videos from sony handycam to linux

    - by bstpierre
    I've got a Sony Handycam DCR-DVD101. When I plug connect the USB cable to my laptop (Ubuntu 10) it doesn't mount any storage device. If I run usb-devices, I see: T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=054c ProdID=00c1 Rev=01.00 S: Manufacturer=SONY S: Product=Storage Device C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=05 Prot=50 Driver=usb-storage The driver says usb-storage, but I'm not sure how to get the device mounted. Is there a way to make this work? Update: checking dmesg, I see: [259072.576559] usb 2-1.1: new high speed USB device using ehci_hcd and address 6 [259072.687200] usb 2-1.1: configuration #1 chosen from 1 choice [259072.836188] Initializing USB Mass Storage driver... [259072.836476] scsi5 : SCSI emulation for USB Mass Storage devices [259072.836632] usb-storage: device found at 6 [259072.836636] usb-storage: waiting for device to settle before scanning [259072.836660] usbcore: registered new interface driver usb-storage [259072.836666] USB Mass Storage support registered. [259077.830410] usb-storage: device scan complete [259077.832343] scsi 5:0:0:0: CD-ROM SONY DDX-A1010 R1.0 PQ: 0 ANSI: 0 [259077.888167] sr1: scsi3-mmc drive: 0x/0x pop-up [259077.888446] sr 5:0:0:0: Attached scsi CD-ROM sr1 [259077.888593] sr 5:0:0:0: Attached scsi generic sg2 type 5 [259080.002079] sr 5:0:0:0: [sr1] Unhandled sense code [259080.002085] sr 5:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [259080.002091] sr 5:0:0:0: [sr1] Sense Key : Blank Check [current] [259080.002097] sr 5:0:0:0: [sr1] Add. Sense: No additional sense information [259080.002104] sr 5:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 00 00 [259080.002117] end_request: I/O error, dev sr1, sector 0 [259080.002123] Buffer I/O error on device sr1, logical block 0 [259080.002128] Buffer I/O error on device sr1, logical block 1 Those I/O errors don't look good, is there any hope?

    Read the article

  • PC to USB transfer slow

    - by Vipin Ms
    I'm having trouble with USB transfer,not with external hard disk. Transfer starts with like, for the transfer of 700MB file it starts with 30mb/s and towards the end it stops at 0s and stays put for like 3-4 mins to transfer the last bit. I have tried different USB devices, but no luck. Is it a bug? Another important point is, in Kubuntu there is no such issue. So is it something related to Gnome? I'm using Ubuntu 11.10 64bit. Somebody please help, it's really annoying. Here are the details. PC all of my drives are in ext4. USB I tried ext3,ntfs and fat32. All having the same problem. Here are my USB controllers details: root@LAB:~# lspci|grep USB 00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) Here is an example of one transfer. I connected one of my 4GB usb device. Nov 24 12:01:25 LAB kernel: [ 1175.082175] userif-2: sent link up event. Nov 24 12:01:25 LAB kernel: [ 1695.684158] usb 2-2: new high speed USB device number 3 using ehci_hcd Nov 24 12:01:25 LAB mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-2" Nov 24 12:01:26 LAB mtp-probe: bus: 2, device: 3 was not an MTP device Nov 24 12:01:26 LAB kernel: [ 1696.132680] usbcore: registered new interface driver uas Nov 24 12:01:26 LAB kernel: [ 1696.142528] Initializing USB Mass Storage driver... Nov 24 12:01:26 LAB kernel: [ 1696.142919] scsi4 : usb-storage 2-2:1.0 Nov 24 12:01:26 LAB kernel: [ 1696.143146] usbcore: registered new interface driver usb-storage Nov 24 12:01:26 LAB kernel: [ 1696.143150] USB Mass Storage support registered. Nov 24 12:01:27 LAB kernel: [ 1697.141657] scsi 4:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 8.02 PQ: 0 ANSI: 0 CCS Nov 24 12:01:27 LAB kernel: [ 1697.168827] sd 4:0:0:0: Attached scsi generic sg2 type 0 Nov 24 12:01:27 LAB kernel: [ 1697.169262] sd 4:0:0:0: [sdb] 7856127 512-byte logical blocks: (4.02 GB/3.74 GiB) Nov 24 12:01:27 LAB kernel: [ 1697.169762] sd 4:0:0:0: [sdb] Write Protect is off Nov 24 12:01:27 LAB kernel: [ 1697.169767] sd 4:0:0:0: [sdb] Mode Sense: 45 00 00 08 Nov 24 12:01:27 LAB kernel: [ 1697.171386] sd 4:0:0:0: [sdb] No Caching mode page present Nov 24 12:01:27 LAB kernel: [ 1697.171391] sd 4:0:0:0: [sdb] Assuming drive cache: write through Nov 24 12:01:27 LAB kernel: [ 1697.173503] sd 4:0:0:0: [sdb] No Caching mode page present Nov 24 12:01:27 LAB kernel: [ 1697.173510] sd 4:0:0:0: [sdb] Assuming drive cache: write through Nov 24 12:01:27 LAB kernel: [ 1697.175337] sdb: sdb1 After that I initiated one transfer. lsof -p 3575|tail -2 mv 3575 root 3r REG 8,8 1719599104 4325379 /media/Misc/The Tree of Life (2011) DVDRip XviD-MAXSPEED/The Tree of Life (2011) DVDRip XviD-MAXSPEED www.torentz.3xforum.ro.avi mv 3575 root 4w REG 8,17 1046347776 15 /media/SREE/The Tree of Life (2011) DVDRip XviD-MAXSPEED/The Tree of Life (2011) DVDRip XviD-MAXSPEED www.torentz.3xforum.ro.avi Here are the total time spent on that transfer. root@LAB:/media/SREE# time mv /media/Misc/The\ Tree\ of\ Life\ \(2011\)\ DVDRip\ XviD-MAXSPEED/ /media/SREE/ real 11m49.334s user 0m0.008s sys 0m5.260s root@LAB:/media/SREE# df -T|tail -2 /dev/sdb1 vfat 3918344 1679308 2239036 43% /media/SREE /dev/sda8 ext4 110110576 60096904 50013672 55% /media/Misc Do you think this is normal?? Approximately 12 minutes for 1.6Gb transfer? Thanks.

    Read the article

  • Drawbacks of installing linux on usb stick?

    - by Znarkus
    I am setting up a router/nas/http/whatever server based on an ION mini-ITX board. I've installed Ubuntu Server on an old 160 GB drive, but it generates a lot more heat and vibrates more than my other new drive (storage). It just doesn't fit the concept, and worse: it takes up a SATA port. As SSD's are crazy expensive I'm thinking of buying an extra 4 GB USB stick, and raid0 it. From my point of view, these are the pros/cons: Pros Low power consumption No vibrations No heat Smaller Get to buy new, larger USB stick (:D) Cons Shorter life time Slower Raid 0 More work maintaing/installing? I think the pros overweighs the cons. Shorter life time and raid 0 is countered by regular backups of the configs/settings. Slower is partially countered by raid 0, and I don't know about the last one. What do You think? Experience? Another solution?

    Read the article

  • Can I "reprogram" an American Express USB drive?

    - by SkippyFire
    I recently received a USB drive that looks like a credit card as a promotion. The drive portion flips out to plug it in. When you plug it in, it opens the run dialog, and opens a URL to an American Express web page. I was able to find it in the Device Manager: But I don't know what else to do? Is there a way I can convert this into a plain old USB drive? Or better yet, can I modify the command that it runs when inserted into a computer?

    Read the article

  • Laptop stopped recognizing USB hard drive

    - by vahokif
    Hi, My Packard Bell EasyNote TX86 laptop stopped recognizing my 1 TB Toshiba Store Art hard drive. It worked fine until now, and it still works on other computers. Other USB devices (including storage) work, and I've tried plugging it in every port, to no avail. When I plug it in it spins up, but Windows doesn't react at all (it's not in disk management), Linux doesn't write anything in dmesg and I can't see it in BIOS setup. I didn't use it at all today, apart from plugging it into a freshly-installed Windows 7 machine once (where it worked). What can I do? Which device is to blame here? EDIT: One more thing. I unplugged the drive while the laptop was hibernated. Google says this might be the problem and it might have something to do with resetting the USB Host Controller.

    Read the article

  • Can't mount Linux usb disk. It just create /dev/sg device but no /dev/sd

    - by MTilsted
    I have a Corsair R60 ssd disk which is a disk with both sata and usb connectors. But the usb thing seems to be a bit non-standard, or maybe its just my fedora linux. When I insert the disk using a usb cabel to a running Fedora 14 linux system, a device called /dev/sg3 is added but that is all. No new /dev/sd* device is created so I can't mount the disk. If I look at cat /proc/scsi/sg/device_strs I get ATA Hitachi HTS54321 FB2O HL-DT-ST DVDRAM GSA-T50N RP05 Seagate Desktop 0130 Corsair CSSD-R60GB2 So the disk is there. (The last entry) but my linux will for some reason not see it as a usb hard disk. When I insert other usb disks they work fine. It is only this specific disk which causes problems. I have tried on 3 different computers with the same result. A hint to the problem may be that if I add the disk to a windows system(With usb) the disk is called "A fixed disk" and not a portable disk as expected. The disk works fine with linux If i connect it with the sata cabel, but I would really like to have it working with usb too. (To mount it on computers without sata). Added: I did try to mount /dev/sg3 but mount say that its not a block device. (File say Its a character special device). Added output from dmesg: [ 97.454073] usb 7-1: USB disconnect, address 2 [ 105.913055] hub 2-0:1.0: unable to enumerate USB device on port 3 [ 107.048054] usb 2-3: new high speed USB device using ehci_hcd and address 5 [ 107.162900] usb 2-3: New USB device found, idVendor=1b1c, idProduct=1ab8 [ 107.162903] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=5 [ 107.162906] usb 2-3: Product: CSSD-R60GB2 [ 107.162908] usb 2-3: Manufacturer: Corsair [ 107.162910] usb 2-3: SerialNumber: 10111441000000990069 [ 107.167651] scsi7 : usb-storage 2-3:1.0 [ 108.195543] scsi 7:0:0:0: Direct-Access Corsair CSSD-R60GB2 PQ: 1 ANSI: 0 [ 108.197732] scsi 7:0:0:0: Attached scsi generic sg3 type 0

    Read the article

  • "System volume folder" always appearing in USB storage stick

    - by ?????? Oyewole
    Whenever I move or copy video files from the PC (Windows 8.1) to my USB storage device and plug it into my TV, I always see a system volume folder on the USB device. This folder can be seen on the PC also, if I choose "view protected system files". My flash drive is formatted with a FAT32 file system. The question is, why is this happening on Windows 8.1, since I never had this problem on Windows 8 before upgrading, and how can I disable this feature?    OK, that's two questions.

    Read the article

  • Monitoring an audio line.

    - by Stefan Liebenberg
    I need to monitor my audio line-in in linux, and in the event that audio is played, the sound must be recorded and saved to a file. Similiar to how motion monitors the video feed. Is it possible to do this with bash? something along the lines of: #!/bin/bash # audio device device=/dev/audio-line-in # below this threshold audio will not be recorded. noise_threshold=10 # folder where recordings are stored storage_folder=~/recordings # run indefenitly, until Ctrl-C is pressed while true; do # noise_level() represents a function to determine # the noise level from device if noise_level( $device ) > $noise_threshold; then # stream from device to file, can be encoded to mp3 later. cat $device > $storage_folder/`date`.raw fi; done;

    Read the article

  • Alfa AWUS036H USB wireless adapter not recognized

    - by GFiasco
    The Alfa AWUS036H USB wireless adapter will not be recognized by my netbook (Ubuntu 14.04, Asus X201E). As I understand it, the drivers should already be built in to this version of Linux, but I tried a make/make install of the latest Realtek drivers (as mentioned on How do I install drivers for the Alfa AWUS036H USB wireless adapter?) and it didn't work. I then followed the advice of this thread (ALFA AWUS036NH driver) and did a make/make install of the most up-to-date backport of the drivers, but that didn't work. At this point I tried a series of commands from this thread (http://ubuntuforums.org/showthread.php?t=2187780) in an attempt to identify the problem, but at no point could I get the laptop to ever recognize the USB adapter. I have also troubleshot the USB cable itself, tried both the USB 2.0 and 3.0 ports on the laptop, have never received an error message regarding a need to update the firmware, and have seemingly successfully installed all manner of variation of Realtek drivers which were supposed to make the adapter work. (I also tried to delete/clean up after each install, in the hope I wasn't making things worse.) Not sure what I should do next. Please let me know if I need to post any more information. Thanks very much for your help. EDIT: Before inserting Alpha USB adapter: :~$ lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:570c Realtek Semiconductor Corp. Bus 001 Device 026: ID 13d3:3393 IMC Networks Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 03f0:3112 Hewlett-Packard Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub After inserting Alpha USB adapter (USB 3.0 port, no change): :~$ lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:570c Realtek Semiconductor Corp. Bus 001 Device 026: ID 13d3:3393 IMC Networks Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 03f0:3112 Hewlett-Packard Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Ran tail -f /var/log/syslog, inserted device, no recognition (last entry is dated 16:17:01, so an hour ago). Going to check on an Ubuntu 14.04 laptop and Windows XP desktop. I'll update after. Thanks for your help to this point.

    Read the article

  • Can't install alternate CD from USB?

    - by mattias
    Hi im trying to install ubuntu 12.04 with full hard disk encryption. After downloading and installing the Ubuntu live CD, I learned that truecrypt doesnt support full disk encryption on linux. I also learned that the best way to get "nearly full disk encryption" on ubuntu is by installing it from the alternate install CD. I tried that, but something is wrong with my CD reader/burner so it doesnt boot up when i insert the cd. My thought here was to take the .iso that I downloaded on my unencrypted Ubuntu system, use Unetbootin to make the usb drive. The usb drive used for this is exactly the same brand as one that I know has worked with a previous ubuntu live system on the same computer. I also used unetbootin for that usb, but I created it from windows that time. The usb stick boots up fine and i get through the first couple of steps in the installation process. However, After a while I get a "box" with the following error message "Load Installer components from CD" There was a problem reading data from the CD-ROM. Please make sure it is in the drive. If retrying does not work, you should check the integrity of your CD-ROM. "Failed to copy file from CD-ROM. Retry? " Then I cant get any further. I googled a lot and found this page which seems to tackle this very problem: http://www.dotkam.com/2010/11/29/ins...mage-from-usb/ I tried to do what it said. After pressing TAB, I wrote : cdrom-detect/try-usb=true without quotes because that's what i think is right. When I press TAB, there already is a text saying : /ubnkern initrd=/ubninit vga=788 -- quiet which can be removed. I have tried to both delete the text before the "--" and just inserting cdrom-detect/try-usb=true before it. Any idea of what can be wrong? I would like to do a full system encryption, or as full as it is possible. I dont want to just encrypt my /home folder. Maybe this isn't the easiest way. I use SanDisk usb sticks. I know there is a problem with U3 launcher on some SanDisks, but I never had to remove U3 before from similar disks, and the alternate install does boot up, so I dont think using U3 removal would help me. Any help or indication to an easier way to do this would be appreciated

    Read the article

  • Save and Run Programs From USB

    - by UbuntuRob
    At the moment I am running Ubuntu 12.10 from a USB memory stick, and I wondered whether it would be possible to save and run any programs I have downloaded from another USB stick instead of the one with the operating system on. I'd like to be able to set the download location in Ubuntu Software Center to the second memory drive, but i don't know how to do this. I can keep the operating system on the one USB and the programs on the other USB, which makes everything much more easier. Any ideas?

    Read the article

  • Cannot re-install Ubuntu 12.04 via USB (USB booting issue)

    - by Mohd Arafat Hossain
    I've read the previous questions related to my same problem regarding the USB not booting issue and have tried everything from what was replied in those post's but still no luck. I will tell you everything I have done so far (If it helps in any way...) 1) Previously I had Windows 7 running on my laptop, where I downloaded the official torrent ISO (i386 desktop) and using Unetbootin I made a bootable USB 2) Restarted the laptop with the USB connected and IT BOOTED, then I installed it on my HDD(Internal) replacing my Windows 7 3) After installing it restarted and I took some time to explore Ubuntu after the log in, then went online and followed some website for the things to do after installing Ubuntu 12.04.....and then there were errors while installing some softwares and plug-ins. The error asked me to check if i was connected to the Internet properly....while I was surfing facebook good as always on an open Firefox. The same error comes when installing Ubuntu one. 4) so I decided to re-install Ubuntu thinking I had done something wrong during the installation (I'm installing from the same USB)...and it didn't boot. I checked the boot priority and it was/is set in USB first (as always). To say in detail what happens is when I restart the USB light flashes at start, later on stops and in the screen the installed Ubuntu 12.04 loads up for me to log in (meaning it's not booting from the USB). By reading you can see that I haven't done much and I honestly didn't even touch the system settings to mess things up. As I have mentioned above I've tried everything in the previous post's in this related topic and it didn't work so I'm hoping for a new solution as a reply. Thanks in advance :) Edited: I wanted to add this I want to clean install instead of solving errors so please give a step by step guide. thanks for any help :)

    Read the article

  • PhP/HTML play button [migrated]

    - by Marian
    I'm wanting to make my own small webpage, I've got a domain Saoo.eu As you see there is a small play button in the corner witch plays a playlist. Is there anyway to have that playbutton on each page I'd add in the future without resetting every time the page changes? Am I forced to use iFrames for that? This is my player code <button id="audioControl" style="width:30px;height:25px;"></button> <audio id="aud" src="" autoplay autobuffer /> Script: $(document).ready(function() { $('#audioControl').html('II'); if(Modernizr.audio && Modernizr.audio.mp3) { audio.setAttribute("src",'http://daokun.webs.com/play0.mp3'); } else if(Modernizr.audio && Modernizr.audio.wav) { audio.setAttribute("src", 'http://daokun.webs.com/play0.ogg'); } }); var audio = document.getElementById('aud'), count = 0; $('#audioControl').toggle( function () { audio.pause(); $('#audioControl').html('>'); }, function () { audio.play(); $('#audioControl').html('II'); } ); audio.addEventListener("ended", function() { count++; if(count == 4){count = 0;} if(Modernizr.audio && Modernizr.audio.mp3) { audio.setAttribute("src",'http://daokun.webs.com/play'+count+'.mp3'); } else if(Modernizr.audio && Modernizr.audio.wav) { audio.setAttribute("src", 'http://daokun.webs.com/play'+count+'.ogg'); } audio.load(); });

    Read the article

  • Kingston SD reader not working for USB3

    - by user1146334
    I have a Kingston 4-in-1 Multimedia reader. When my PC was formatted with Win7 it worked fine. I decided to change to Ubuntu 14.04 and now it doesn't work. If I plug it into one of the USB2 ports it works fine, but whenever I plug it into one of the USB3 ports, it thinks about it for a minute and then dies. Here's the output of dmesg when it dies [110262.148656] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd [110262.170330] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [110262.266379] usb 4-1: New USB device found, idVendor=11b0, idProduct=6348 [110262.266386] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [110262.266390] usb 4-1: Product: USB3.0 Media Reader [110262.266394] usb 4-1: Manufacturer: Kingston [110262.266398] usb 4-1: SerialNumber: 08735314400198 [110262.272929] usb-storage 4-1:1.0: USB Mass Storage device detected [110262.273239] scsi15 : usb-storage 4-1:1.0 [110263.290056] scsi 15:0:0:0: Direct-Access FCR-HS3 -0 1.00 PQ: 0 ANSI: 4 [110263.306622] scsi 15:0:0:1: Direct-Access FCR-HS3 -1 1.00 PQ: 0 ANSI: 4 [110263.323292] scsi 15:0:0:2: Direct-Access FCR-HS3 -2 1.00 PQ: 0 ANSI: 4 [110263.339858] scsi 15:0:0:3: Direct-Access FCR-HS3 -3 1.00 PQ: 0 ANSI: 4 [110263.340332] sd 15:0:0:0: Attached scsi generic sg3 type 0 [110263.340706] sd 15:0:0:1: Attached scsi generic sg4 type 0 [110263.340850] sd 15:0:0:2: Attached scsi generic sg5 type 0 [110263.340975] sd 15:0:0:3: Attached scsi generic sg6 type 0 [110264.651847] sd 15:0:0:1: [sde] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) [110264.667049] sd 15:0:0:1: [sde] Write Protect is off [110264.667055] sd 15:0:0:1: [sde] Mode Sense: 2f 00 00 00 [110264.682767] sd 15:0:0:1: [sde] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [110264.694975] sd 15:0:0:2: [sdf] Attached SCSI removable disk [110264.697933] sd 15:0:0:3: [sdg] Attached SCSI removable disk [110264.729918] sd 15:0:0:0: [sdd] Attached SCSI removable disk [110264.754189] sde: sde1 [110264.760114] sd 15:0:0:1: [sde] Attached SCSI removable disk [110275.377368] usb 4-1: reset SuperSpeed USB device number 3 using xhci_hcd [110275.398453] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [110275.436592] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802e4fb9980 [110275.436600] xhci_hcd 0000:05:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff8802e4fb99c0 [110277.263444] usb 4-1: USB disconnect, device number 3

    Read the article

  • Auto backup a user folder to a usb when usb is plugged in

    - by Azztech Computers
    I'm a computer technician and help customers everyday with their computers and smartphones and have a really basic (i think) request but dont know how to go about it. Customer always come in with broken phones, water damage, needing updates, or just want me to backup their information. I currently have a program that i use when i backup their computers it backups their iOS folder C:\Users\USER\AppData\Roaming\Apple Computer\MobileSync\Backup but what i want is a quick easy way to do this in customers houses. What i require is a way when i plug in a USB drive it AUTOMATICALLY searches for the folder and starts transferring the folder to a predefined folder on the USB drive. This was I can just plug it in and begin work on their computer or phone without the risk of losing their information. I'm sure there is a .bat/.ini file i could use but wondering if someone has already done this or something similar as I would need it to search all the USER folders not just the one I'm logged into. Thanks in advance

    Read the article

  • Web Audio API and mobile browsers

    - by Michael
    I've run into a problem while implementing sound and music into an HTML game that I'm building. I'm using the Web Audio API, loading all the sound files with XMLHttpRequests and decoding them into an AudioBufferSourceNode with AudioContext.prototype.decodeAudioData(). It looks something like this: var request = new XMLHttpRequest(); request.open("GET", "soundfile.ogg", true); request.responseType = "arraybuffer"; request.onload = function() { context.decodeAudioData(request.response) } request.send(); Everything plays fine, but on mobile the decodeAudioData takes an absurdly long time for the background music. I then tried using AudioContext.prototype.createMediaElementSource() to load the music from an HTML Audio object, since they support streaming and don't have to load the whole file into memory at once. It looked something like this: var audio = new Audio('soundfile.ogg'); var source = context.createMediaElementSource(audio); var mainVolume = context.createGain(); source.connect(mainVolume); mainVolume.connect(context.destination); This loads much faster, but the audio volume isn't affected by the gain node. Works fine on desktop, so I'm assuming this is a bug/limitation of mobile Chrome (testing on Android). Is there actually no good, well-performing way to handle sound on mobile browsers or am just I doing something stupid?

    Read the article

  • Audio programming resources

    - by rashleighp
    I've been very interested in the last few months about getting in to audio programming (I'm from a musical background). I've been a .NET developer for two years and have also done some objective c for an iPhone app recently. I realise I would probably need to work on my C++ chops and have been having a play around with FMOD EX and doing a lot of research into the industry. I was just wondering if anyone could suggest some good resources for audio programming (be they websites, podcasts, books, videos, online courses etc). Anything from Fourier analysis, low level coding, audio engine creation to audio APIs. I just want to learn as much as possible! Thanks in advance.

    Read the article

  • Setting Up Audio on a Server Install

    - by tdcrenshaw
    I'm running on a clean install of 10.10 Server edition and have alsa-base, alsa-tools, alsa-utils, alsaplayer, and alsa-firmware-loader installed. At one point I installed pulseaudio, but I have since removed it. I've tried the following lspci | grep audio 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) 01:06.0 Multimedia audio controller: Creative Labs [SB Live! Value] EMU10k1X aplay -l aplay: device_list:235: no soundcards found... alsamixer can not open mixer: No such file or directory When I search for modules with find /lib/modules/`uname -r` | grep snd I do get a list of modules I'm not very experienced with alsa setup, so I'm not sure where to go from here

    Read the article

  • USB audio device not detected [solved]

    - by user199052
    I've been having problems with USB sound for some time (it used to work about 6 months ago). I find that any USB sound device that I connect is not recognised, and is not listed by aplay -l I've tried disabling pulseaudio. I've tried purging and re-installing alsa-base, pulseaudio, and pavucontrol. To no avail. I'm using 12.04 LTS. I found the solution: 12.04 does not have the needed kernel module snd-usb-hiface this is introduced in the 3.11.1 kernel and installing that on 12.04 gives USB sound for my equipment. How to install the 3.11.1 kernel is given here:- installing 3.11.1 kernel

    Read the article

  • Using UDF on a USB flash drive

    - by CesarB
    After failing to copy a file bigger than 4G to my 8G USB flash drive, I formatted it as ext3. While this is working fine for me so far, it will cause problems if I want to use it to copy files to someone which does not use Linux. I am thinking of formatting it as UDF instead, which I hope would allow it to be read (and possibly even written) on the three most popular operating systems (Windows, MacOS, and Linux), without having to install any extra drivers. However, from what I found on the web already, there seem to be several small gotchas related to which parameters are used to create the filesystem, which can reduce the compability (but most of the pages I found are about optical media, not USB flash drives). I would like to know: Which utility should I use to create the filesystem? (So far I have found mkudffs and genisoimage, and mkudffs seems the best option.) Which parameters should I use with the chosen utility for maximum compability? How compatible with the most common versions of these three operating systems UDF actually is? Is using UDF actually the best idea? Is there another filesystem which would have better compatibility, with no problematic restrictions like the FAT32 4G file size limit, and without having to install special drivers in every single computer which touches it?

    Read the article

< Previous Page | 4 5 6 7 8 9 10 11 12 13 14 15  | Next Page >