Search Results

Search found 2241 results on 90 pages for 'fire lancer'.

Page 80/90 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

  • Gartner PCC Follow-up: Interview with Chaeny Emanavin, Usability Lead - Office of Information Develo

    - by [email protected]
    Last week at the Gartner Portals, Content and Collaboration conference in Baltimore, Chaeny and I co-presented on Oracle Enterprise 2.0 and BIA's Citizen Portal. Chaeny's presentation about the BIA solution was very well received and I wanted to do a follow-up interview with Chaeny to discuss more details about their solution and its Enterprise 2.0 features. Ajay: What were the main objectives for the BIA Citizen Portal? Chaeny: The BIA Citizen Portal is designed to provide all the services of the Bureau of Indian Affairs to the community of 564 federally recognized tribes that include over 1.9 million American Indians and Alaska Natives. The BIA provides the same breadth of services that the entire U.S. Federal Government provides in one small Bureau. So, we needed a solution that was flexible enough to handle content ranging from law enforcement to housing to education. Key objectives for external users was to use the Web as a communications channel and keep them informed on what services are available. We also wanted to build an internal web presence and community for BIA's 5000 employees to ensure that they update their content, leverage internal experts and create single sources of truth for key policy documents. Ajay: How is the project being implemented? Chaeny: We are using a phased approach. In phases 1 & 2, interim internal and external sites were built to ensure usability and functional requirements are being met. In Phases 3 & 4, we built out a modern internal and external presence using Oracle WebCenter Suite and Oracle Universal Content Management (UCM), including enabling delegated content management for our internal business units. Phase 4 was completed in January 2010. Phase 5 will add deeper Enterprise 2.0 collaboration capabilities to the solution. Ajay: Are you integrating any existing sites into the new solution? Chaeny: Yes, we have a SharePoint implementation that we are using for document management. We needed more precise functionality however. We found that SharePoint would let individual administrators of a SharePoint site actually create new sites. In a 3 months span, we had over 200 new sites created and most were not being used. So, we had an enormous sprawl problem. Our requirements mandated increased governance and more granular control over the creation of sites and flexible user access to content. In SharePoint this required custom code and was very time-intensive which was unfeasible given our tight deadlines. We are piloting Oracle WebCenter Spaces as our collaboration solution to mitigate these issues. However, we must integrate our existing SharePoint investment which we can do easily by using the SharePoint connectors available in Oracle WebCenter and UCM. Ajay: What were the key design parameters for your solution? Chaeny: We wanted everything driven by standards and policies. We created a cross-functional steering group called the Indian Affairs Web Council to codify policies that were baked into the system. Other key design areas were focused on security/governance, self-service content management, ease of use, integration with legacy applications and seamless single sign-on. We are using Dublin Core as our metadata standard. We also are using Java, APEX, and ADF as our development standards. Ajay: Why was it important to standardize on a platform? Chaeny: We initially looked at best-of-breed solutions, but we faced a lot of issues getting the different solutions to work together. Going with an integrated solution was more economical, easier to learn and faster to deliver the solution. Ajay: What type of legacy applications are you integrating into the portal? Chaeny: Initially we are starting with administrative apps such as people directory and user admin and then we will integrate HR and Financial applications among others. Ajay: Can you describe some of the E20 collaboration features you are putting into the solution? Chaeny: We are adding Enterprise 2.0 using Oracle WebCenter Spaces to deliver different collaboration tools such as wikis, blogs and discussion forums. Wikis to create rapid, ad hoc monthly roll-up reports; discussion forums to provide context-specific help; blogs to capture tacit organization knowledge from experts, identify gurus and turn tacit knowledge into explicit knowledge. Ajay: Are you doing anything specifically to spur adoption and usage? Chaeny: Yes, we did several things that I think helped us ramp quickly. First, we met our commitments for the new system launch date and also provided extra resources for a customer support "hotline" during the launch period. Prior to launch, we did exhaustive usability studies to capture user requirements around functionality, navigation and other key interaction areas. We also created extensive training programs so that the content managers in each business unit were comfortable using the content management tools and knew the best practices for usage. Finally, to launch the Enterprise 2.0 collaboration capabilities, we are working with a pilot group from the Division of Forestry and Wildland Fire Management of BIA. This group of people in the past have been willing early adopters and they have a strong business need to collaborate with many agencies both internal and external across State, County and other Federal jurisdictions. Their feedback is key to helping us launch Enterprise 2.0 successfully in our broader organization. Ajay: What were the biggest benefits to internal BIA employees and to the external community of users? Chaeny: For our employees, the new Enterprise 2.0-based solution will make it easier to find information; enhance employee productivity by embedding standard business processes into the system and create more of a community by creating connections with experts via social collaboration to ultimately provide better services more quickly. For the external American Indian and Alaska Native communities, we have a better relationship with the users and the new site has improved BIA's perception as a more responsive and customer-centric organization.

    Read the article

  • Silverlight Cream for December 05, 2010 -- #1003

    - by Dave Campbell
    In this (Almost) All-Submittal Issue: John Papa(-2-), Jesse Liberty, Tim Heuer, Dan Wahlin, Markus Egger, Phil Middlemiss, Coding4Fun, Michael Washington, Gill Cleeren, MichaelD!, Colin Eberhardt, Kunal Chowdhury, and Rabeeh Abla. Above the Fold: Silverlight: "Two-Way Binding on TreeView.SelectedItem" Phil Middlemiss WP7: "Taking Screen Shots of Windows Phone 7 Panorama Apps" Markus Egger Training: "Beginners Guide to Visual Studio LightSwitch (Part - 4)" Kunal Chowdhury Shoutouts: Don't let the fire go out... check out the Firestarter Labs Bart Czernicki discusses the need for 64-bit Silverlight: Why a 64-bit runtime for Silverlight 5 Matters Laurent Duveau is interviewed by the SilverlightShow folks to discuss his WP7 app: Laurent Duveau on Morse Code Flash Light WP7 Application From SilverlightCream.com: John Papa: Silverlight 5 Features John Papa has a post up highlighting his take on what's cool in the new featureset for Silverlight 5... including an external link to the keynote. Silverlight Firestarter Keynote and Sessions John Papa also has posted links to all the individual session videos... what a great resource! Yet Another Podcast #17 – Scott Guthrie Jesse Liberty went big with his latest Yet Another Podcast ... he is interviewing Scott Guthrie about the Firestarter, Silverlight, WP7. and more. Silverlight 5 Plans Revealed With this post from Tim Heuer, I find myself adding a Silverlight 5 tag... so bring on the fun! ... unless you've been overloaded like I have since last Thursday, you've probably seen this, but what the heck... Silverlight Firestarter Wrap Up and WCF RIA Services Talk Sample Code Phoenix's own Dan Wahlin had a great WCF RIA Services presentation at the Firestarter last week, and his material and lots of other good links are up on his blog, and I'd say that even if he didn't have a couple shoutouts to me in it :) Thanks Dan!! Taking Screen Shots of Windows Phone 7 Panorama Apps Markus Egger helps us all out with a post on how to get screenshots of your WP7 Panorama app... in case you haven't tried it ... it's not as easy as it sounds! Two-Way Binding on TreeView.SelectedItem Phil Middlemiss is back with a post taking some of the mystery out of the TreeView control bound to a data context and dealing with the SelectedItem property... oh yeah, and throw all that into MVVM! Great tutorial as usual, a cool behavior, and all the source. Native Extensions for Microsoft Silverlight Alan Cobb pointed me to a quick post up on the Coding4Fun site about the NESL (Native Extensions for SilverLight) from Microsoft that give access to some cool features of Windows 7 from Silverlight... I added an NESL tag in case other posts appear on this subject. Silverlight Simple Drag And Drop / Or Browse View Model / MVVM File Upload Control Michael Washington has another great tutorial up at CodeProject that expands on prior work he'd done with drag/drop file upload with this post on integrating an updated browse/upload into ViewModel/MVVM projects, all of which is Blendable. The validation story in Silverlight (Part 1) In good news for all of us, Gill Cleeren has started a tutorial series at SilverlightShow on Silverlight Validation. The first one is up discussing the basics... The Common Framework MichaelD! has a WPF/Silverlight framework up with Facebook Authentication, Xaml-driven IOC, T4 synchronous WCF proxies, and WP7 on the roadmap... source on CodePlex, check it out and give him some feedback. Exploring Reactive Extensions (Rx) through Twitter and Bing Maps Mashups If you've been waiting around to learn Rx, Colin Eberhardt has the post up for you (and me)... great tutorial up on Twitter and Bing Maps Mashups ... and all the code... for the twitter immediate app, and also the UKSnow one we showed last week... check out the demo page, and grab the source! Beginners Guide to Visual Studio LightSwitch (Part - 4) Kunal Chowdhury has the 4th part of his Lightswitch tutorial series up at SilverlightShow. In this one, he shows how to integrate multiple tables into a screen. It is here Take Your Silverlight Application Full Screen & intercept all windows keys !! Rabeeh Abla sent me this link to the blog describing a COM exposed library that intercepts all keys when Silverlight is full-screen. There are a few I hit when I'm going through blogs that Ctrl-W (FF) just won't take down and that annoys me... so this might be a solution if you have that problem... worth a look anyway! Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

    Read the article

  • Nerdstock 2012: A photo review of Microsoft TechEd North America 2012

    - by The Un-T Guy
    Not only could I not fathom that I would ever be attending a tech event of the magnitude of TechEd, neither could any of my co-workers.  As the least technical person in the history of Information Technology ever, I felt as though I were walking into the belly of the beast, fearing I’d not be allowed out until I could write SSIS packages, program in Visual Basic, or at least arm wrestle a DBA.  Most of my fears were unrealized.   But I made it.  I was here.  I even got to wear the Mark of the Geek neck package with schedule, eyeglass cleaners, name badge (company name obfuscated so they don’t fire me), and a pen.  The name  badge was seemingly the key element, as every vendor in the place wanted to scan it to capture name, email address, and numbers to show their bosses back home.  It also let me eat the food and drink the coffee so that’s a fair trade.   A recurring theme throughout the presentations and vendor demos was “the Cloud” and BYOD (bring your own device).  The below was a common site throughout the week, as attendees from all over the world brought their own devices and were able to (seemingly) seamlessly connect to the Worldwide Innerwebs.  Apparently proof that Microsoft and the event organizers were practicing what they were preaching.   “Cavernous” is one way to describe the downstairs facility itself.  “Freaking cavernous” might be more accurate.  Work sessions were held in classrooms on the second and third floors but the real action was happening downstairs.  Microsoft bookstore, blogger hub (shoutout to Geekswithblogs.net), The Wall (sans Pink Floyd, sadly), couches, recharging stations…   …a game zone with pool and air hockey tables, pinball machines, foosball…   …vintage video games…           …and a even giant chess board.  Looked like this guy was opening with the Kaspersky parry.   The blend of technology and fantasy even went so far as to bring childhood favorites to life.  Assuming, of course, your childhood was pre-video games (like mine) and you were stuck with electric football and Rock ‘em Sock ‘em robots:   And, lest the “combatants” become unruly or – God forbid – afternoon snacks were late, Orange County’s finest was on the scene to keep the peace.  On a high-tech mode of transport, of course.   She wasn’t the only one to think this was a swell way to transition from one concourse to the next.  Given the level of support provided by the entire Orange County Convention Center staff, I knew they had to have some secret.   Here’s one entrance to the vendor zone/”Technical Learning Center.”  Couldn’t help but think of them as the remora attached to the Whale Shark that is Microsoft…   …or perhaps planets orbiting the sun. Microsoft is just that huge and it seemed like every vendor in the industry looks forward to partnering with the tech behemoth.   Aside from the free stuff from the vendors, probably the most popular place in the house was the dining area.  Amazing spreads every day, multiple times a day.  While no attendance numbers were available at press time, literally thousands of attendees were fed, and fed well, every day.  And lest you think my post from earlier in the week exaggerated about the backpacks…   …or that I’m exaggerating about the lunch crowds.  This represents only about between 25-30% of the lunch crowd – it was all my camera could capture at once.  No one went away hungry.   The only thing missing was a a vat of Red Bull but apparently organizers went old school, with probably 100 urns of the original energy drink – coffee – all around the venue.   Of course, following lunch and afternoon sessions, some preferred the even older school method of re-energizing.  There were rumors that Microsoft was serving graham crackers and milk in this area.  But they were only rumors.   Cannot overstate the wonderful service provided by the Orange County Convention Center staff.  Coffee, soft drinks, juice, and water were available always.  Buffet meals were delicious with a wide range of healthy options available, in addition to hundreds (at least) special meal requests supported every day.  Ever tried to keep up with an estimated 9,000 hungry and thirsty IT-ers?  These folks did.  Kudos to all of the staff and many thanks!   And while I occasionally poke fun at the Whale Shark, if nothing else this experience convinced me of one thing:  Microsoft knows how to put on a professional event.  Hundreds of informative, professionally delivered sessions, covering a wide range of topics set at varying levels of expertise (some that even I was able to follow), social activities, vendor partnerships…they brought everything you could ask for to inform, educate, and inspire an entire IT industry.   So as I depart the belly of the beast, I can both take pride in the fact that I survived the week and marvel at the brilliance surrounding me.  The IT industry – or at least the segment associated with Microsoft – is in good, professional hands.  And what won’t fit in their hands can be toted in the Microsoft provided backpacks.  Win-win.   Until New Orleans…

    Read the article

  • Information Indepth Newsletter - Linux Edition

    - by Paulo Folgado
    INFORMATION INDEPTH NEWSLETTERLinux Edition February 2011 Stay Connected:  NEWS Now Available: Oracle Linux 6 Get the latest release of Oracle Linux 6, which includes Unbreakable Enterprise Kernel.Download Oracle Linux 6 Read More Customers Succeed by Using Oracle Exadata with Oracle Linux Watch IT executives from Bank of America, Linkshare, and Johns Hopkins as they talk about the business challenges they faced and why they chose to use Oracle Linux along with Oracle Exadata as the solution. Watch Now Video Interview: Oracle Senior Vice President Wim Coekaerts Watch Wim Coekaerts, senior vice president, Linux and Virtualization Engineering, as he talks about use cases for Oracle VM Templates as well as the Unbreakable Enterprise Kernel for Linux.Watch Now Hot Off the Press: Migrate Your IBM AIX Environment to Oracle Linux This new white paper provides recommendations for planning and implementing the migration of applications from an IBM Power System running AIX to Oracle's Sun Fire X4800 Server with Intel Xeon 7560 Processor running Oracle Linux 5.5.Read More  Back to Top BLOGOSPHERE Just Launched: The Oracle Linux Blog Follow our new Oracle Linux blog  to hear the latest updates, product news, upcoming events, and all the latest happenings, directly from the Linux team at Oracle. Back to Top TECH DIVE NEW: Linux/Oracle Solaris CommandComparo Site from Oracle Technology NetworkThis site gives equivalent command syntax in Oracle Solaris 10 and Oracle Enterprise Linux 5 for common administrative tasks--focusing particularly on tasks that have tricky syntax or that you frequently need to double check. It acts as a quick reference for administrators who operate in these two OS environments. Free Download: Oracle Linux Release 5.6Did you know that by using Oracle Linux 5.5 or 5.6 along with the Unbreakable Enterprise Kernel, you can get all the benefits of Linux mainline kernel 2.6.32 and more, right now, without the need to reinstall or migrate to a new operating system such as RHEL6?Read Release NotesDownload Oracle Linux 5.6 LSB 4.0 Certification Completed for Oracle Linux 5.5Oracle Linux 5.5 with Unbreakable Enterprise Kernel successfully completed the LSB 4.0 certification.  Back to Top WEBCASTS Boost Your Linux Performance with Oracle's Enhancements in Infiniband and RDSRegister to hear Director of Kernel Engineering Chris Mason cover scalability and performance improvements in Linux environment. Get the Facts Oracle's Unbreakable Enterprise KernelSVP Wim Coekaerts and Senior Director Monica Kumar cover the facts about and benefits of using Unbreakable Enterprise Kernel.  View Other Webcasts on Demand   Back to Top EVENTS Collaborate 2011April 10-14 Orlando, Florida Cloud Summit Events, WorldwideVarious dates (check the city for date/time of event) Datacenter Efficiency Events WorldwideThese events include Linux and Oracle VM sessions.Various dates (check the city for date/time of event) Virtualization Events in North America Find an Oracle Event  Back to Top EDUCATION Get Oracle Linux Certified from Oracle University Oracle University offers courses in both Oracle Linux and the administration of Oracle Database on Linux.  Back to Top CUSTOMER SPOTLIGHT Pella Corporation Improves IT Performance and Efficiency with Oracle Linux and Oracle VM To improve IT performance and efficiency and lower operational costs, Pella Corporation, has standardized on Oracle VM and Oracle Linux. Read More Disney Store Deploys POS in 330 Stores and 7 Countries on Oracle Linux Disney Store is running 1,500 registers worldwide on a broad Oracle technology software stack including Oracle Database 11g, Oracle Fusion Middleware, and Oracle Linux. Read More Back to Top PARTNER SPOTLIGHT Emulex and Oracle Announce Data Integrity Features The Unbreakable Enterprise Kernel provides data integrity checking between Oracle Database applications and Emulex 8Gb/s LightPulse Fibre Channel Host Bus Adapters. Read More Dell Inc. Dell Inc. tested and validated configurations support Oracle Linux. Back to Top STAY IN TOUCH Follow @ORCL_Linux on Twitter for the latest penguin tweets Bookmark Oracle.com/Linux Read the Oracle Linux blog Back to Top  Oracle Information InDepth newsletters bring targeted news, articles, customer stories, and special offers to business people who want to find out how to streamline enterprise information management, measure results, improve business processes, and communicate a single truth to their constituents. Please send questions or comments to [email protected]. For answers to questions about subscribing, unsubscribing, and managing your Oracle e-mail communications preferences, please see the Oracle E-Mail Communications page. Copyright © 2011, Oracle Corporation and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. This document is provided for information purposes only, and the contents hereof are subject to change without notice. This document is not warranted to be error-free, nor is it subject to any other warranties or conditions, whether expressed orally or implied in law, including implied warranties and conditions of merchantability or fitness for a particular purpose. We specifically disclaim any liability with respect to this document, and no contractual obligations are formed either directly or indirectly by this document. This document may not be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without our prior written permission. 

    Read the article

  • Inserting and Deleting Sub Rows in GridView

    - by Vincent Maverick Durano
    A user in the forums (http://forums.asp.net) is asking how to insert  sub rows in GridView and also add delete functionality for the inserted sub rows. In this post I'm going to demonstrate how to this in ASP.NET WebForms.  The basic idea to achieve this is we just need to insert row data in the DataSource that is being used in GridView since the GridView rows will be generated based on the DataSource data. To make it more clear then let's build up a sample application. To start fire up Visual Studio and create a WebSite or Web Application project and then add a new WebForm. In the WebForm ASPX page add this GridView markup below:   1: <asp:gridview ID="GridView1" runat="server" AutoGenerateColumns="false" onrowdatabound="GridView1_RowDataBound"> 2: <Columns> 3: <asp:BoundField DataField="RowNumber" HeaderText="Row Number" /> 4: <asp:TemplateField HeaderText="Header 1"> 5: <ItemTemplate> 6: <asp:TextBox ID="TextBox1" runat="server"></asp:TextBox> 7: </ItemTemplate> 8: </asp:TemplateField> 9: <asp:TemplateField HeaderText="Header 2"> 10: <ItemTemplate> 11: <asp:TextBox ID="TextBox2" runat="server"></asp:TextBox> 12: </ItemTemplate> 13: </asp:TemplateField> 14: <asp:TemplateField HeaderText="Header 3"> 15: <ItemTemplate> 16: <asp:TextBox ID="TextBox3" runat="server"></asp:TextBox> 17: </ItemTemplate> 18: </asp:TemplateField> 19: <asp:TemplateField HeaderText="Action"> 20: <ItemTemplate> 21: <asp:LinkButton ID="LinkButton1" runat="server" onclick="LinkButton1_Click" Text="Insert"></asp:LinkButton> 22: </ItemTemplate> 23: </asp:TemplateField> 24: </Columns> 25: </asp:gridview>   Then at the code behind source of ASPX page you can add this codes below:   1: private DataTable FillData() { 2:   3: DataTable dt = new DataTable(); 4: DataRow dr = null; 5:   6: //Create DataTable columns 7: dt.Columns.Add(new DataColumn("RowNumber", typeof(string))); 8:   9: //Create Row for each columns 10: dr = dt.NewRow(); 11: dr["RowNumber"] = 1; 12: dt.Rows.Add(dr); 13:   14: dr = dt.NewRow(); 15: dr["RowNumber"] = 2; 16: dt.Rows.Add(dr); 17:   18: dr = dt.NewRow(); 19: dr["RowNumber"] = 3; 20: dt.Rows.Add(dr); 21:   22: dr = dt.NewRow(); 23: dr["RowNumber"] = 4; 24: dt.Rows.Add(dr); 25:   26: dr = dt.NewRow(); 27: dr["RowNumber"] = 5; 28: dt.Rows.Add(dr); 29:   30: //Store the DataTable in ViewState for future reference 31: ViewState["CurrentTable"] = dt; 32:   33: return dt; 34:   35: } 36:   37: private void BindGridView(DataTable dtSource) { 38: GridView1.DataSource = dtSource; 39: GridView1.DataBind(); 40: } 41:   42: private DataRow InsertRow(DataTable dtSource, string value) { 43: DataRow dr = dtSource.NewRow(); 44: dr["RowNumber"] = value; 45: return dr; 46: } 47: //private DataRow DeleteRow(DataTable dtSource, 48:   49: protected void Page_Load(object sender, EventArgs e) { 50: if (!IsPostBack) { 51: BindGridView(FillData()); 52: } 53: } 54:   55: protected void LinkButton1_Click(object sender, EventArgs e) { 56: LinkButton lb = (LinkButton)sender; 57: GridViewRow row = (GridViewRow)lb.NamingContainer; 58: DataTable dtCurrentData = (DataTable)ViewState["CurrentTable"]; 59: if (lb.Text == "Insert") { 60: //Insert new row below the selected row 61: dtCurrentData.Rows.InsertAt(InsertRow(dtCurrentData, row.Cells[0].Text + "-sub"), row.RowIndex + 1); 62:   63: } 64: else { 65: //Delete selected sub row 66: dtCurrentData.Rows.RemoveAt(row.RowIndex); 67: } 68:   69: BindGridView(dtCurrentData); 70: ViewState["CurrentTable"] = dtCurrentData; 71: } 72:   73: protected void GridView1_RowDataBound(object sender, GridViewRowEventArgs e) { 74: if (e.Row.RowType == DataControlRowType.DataRow) { 75: if (e.Row.Cells[0].Text.Contains("-sub")) { 76: ((LinkButton)e.Row.FindControl("LinkButton1")).Text = "Delete"; 77: } 78: } 79: }   As you can see the code above is pretty straight forward and self explainatory but just to give you a short explaination the code above is composed of three (3) private methods which are the FillData(), BindGridView and InsertRow(). The FillData() method is a method that returns a DataTable and basically creates a dummy data in the DataTable to be used as the GridView DataSource. You can replace the code in that method if you want to use actual data from database but for the purpose of this example I just fill the DataTable with a dummy data on it. The BindGridVew is a method that handles the actual binding of GridVew. The InsertRow() is a method that returns a DataRow. This method handles the insertion of the sub row. Now in the LinkButton OnClick event, we casted the sender to a LinkButton to determine the specific object that fires up the event and get the row values. We then reference the Data from ViewState to get the current data that is being used in the GridView. If the LinkButton text is "Insert" then we will insert new row to the DataSource ( in this case the DataTable) based on the rowIndex if not then Delete the sub row that was added. Here are some screen shots of the output below: On initial load:   After inserting a sub row:   That's it! I hope someone find this post useful!   Technorati Tags: ASP.NET,C#,GridView

    Read the article

  • I Didn&rsquo;t Get You Anything&hellip;

    - by Bob Rhubart
    Nearly every day this blog features a  list posts and articles written by members of the OTN architect community. But with Christmas just days away, I thought a break in that routine was in order. After all, if the holidays aren’t excuse enough for an off-topic post, then the terrorists have won. Rather than buy gifts for everyone -- which, given the readership of this blog and my budget could amount to a cash outlay of upwards of $15.00 – I thought I’d share a bit of holiday humor. I wrote the following essay back in the mid-90s, for a “print” publication that used “paper” as a content delivery system.  That was then. I’m older now, my kids are older, but my feelings toward the holidays haven’t changed… It’s New, It’s Improved, It’s Christmas! The holidays are a time of rituals. Some of these, like the shopping, the music, the decorations, and the food, are comforting in their predictability. Other rituals, like the shopping, the  music, the decorations, and the food, can leave you curled into the fetal position in some dark corner, whimpering. How you react to these various rituals depends a lot on your general disposition and credit card balance. I, for one, love Christmas. But there is one Christmas ritual that really tangles my tinsel: the seasonal editorializing about how our modern celebration of the holidays pales in comparison to that of Christmas past. It's not that the old notions of how to celebrate the holidays aren't all cozy and romantic--you can't watch marathon broadcasts of "It's A Wonderful White Christmas Carol On Thirty-Fourth Street Story" without a nostalgic teardrop or two falling onto your plate of Christmas nachos. It's just that the loudest cheerleaders for "old-fashioned" holiday celebrations overlook the fact that way-back-when those people didn't have the option of doing it any other way. Dashing through the snow in a one-horse open sleigh? No thanks. When Christmas morning rolls around, I'm going to be mighty grateful that the family is going to hop into a nice warm Toyota for the ride over to grandma's place. I figure a horse-drawn sleigh is big fun for maybe fifteen minutes. After that you’re going to want Old Dobbin to haul ass back to someplace warm where the egg nog is spiked and the family can gather in the flickering glow of a giant TV and contemplate the true meaning of football. Chestnuts roasting on an open fire? Sorry, no fireplace. We've got a furnace for heat, and stuffing nuts in there voids the warranty. Any of the roasting we do these days is in the microwave, and I'm pretty sure that if you put chestnuts in the microwave they would become little yuletide hand grenades. Although, if you've got a snoot full of Yule grog, watching chestnuts explode in your microwave might be a real holiday hoot. Some people may see microwave ovens as a symptom of creeping non-traditional holiday-ism. But I'll bet you that if there were microwave ovens around in Charles Dickens' day, the Cratchits wouldn't have had to entertain an uncharacteristically giddy Scrooge for six or seven hours while the goose cooked. Holiday entertaining is, in fact, the one area that even the most severe critic of modern practices would have to admit has not changed since Tim was Tiny. A good holiday celebration, then as now, involves lots of food, free-flowing drink, and a gathering of friends and family, some of whom you are about as happy to see as a subpoena. Just as the Cratchit's Christmas was spent with a man who, for all they knew, had suffered some kind of head trauma, so the modern holiday gathering includes relatives or acquaintances who, because they watch too many talk shows, and/or have poor personal hygiene, and/or fail to maintain scheduled medication, you would normally avoid like a plate of frosted botulism. But in the season of good will towards men, you smile warmly at the mystery uncle wandering around half-crocked with a clump of mistletoe dangling from the bill of his N.R.A. cap. Dickens' story wouldn't have become the holiday classic it has if, having spotted on their doorstep an insanely grinning, raw poultry-bearing, fresh-off-a-rough-night Scrooge, the Cratchits had pulled their shades and pretended not to be home. Which is probably what I would have done. Instead, knowing full well his reputation as a career grouch, they welcomed him into their home, and we have a touching story that teaches a valuable lesson about how the Christmas spirit can get the boss to pump up the payroll. Despite what the critics might say, our modern Christmas isn't all that different from those of long ago. Sure, the technology has changed, but that just means a bigger, brighter, louder Christmas, with lasers and holograms and stuff. It's our modern celebration of a season that even the least spiritual among us recognizes as a time of hope that the nutcases of the world will wake up and realize that peace on earth is a win/win proposition for everybody. If Christmas has changed, it's for the better. We should continue making Christmas bigger and louder and shinier until everybody gets it.  *** Happy Holidays, everyone!   del.icio.us Tags: holiday,humor Technorati Tags: holiday,humor

    Read the article

  • A Rose by Any Other Name..

    - by Geoff N. Hiten
    It is always a good start when you can steal a title line from one of the best writers in the English language.  Let’s hope I can make the rest of this post live up to the opening.  One recurring problem with SQL server is moving databases to new servers.  Client applications use a variety of ways to resolve SQL Server names, some of which are not changed easily <cough SharePoint /cough>.  If you happen to be using default instances on both the source and target SQL Server, then the solution is pretty simple.  You create (or bug the network admin until she creates) two DNS “A” records. One points the old name to the new IP address.  The other creates a new alias for the old server, since the original system name is now redirected.  Note this will redirect ALL traffic from the old server to the new server, including RDP and file share connection attempts.    Figure 1 – Microsoft DNS MMC Snap-In   Figure 2 – DNS New Host Dialog Box Both records are necessary so you can still access the old server via an alternate name. Server Role IP Address Name Alias Source 10.97.230.60 SQL01 SQL01_Old Target 10.97.230.80 SQL02 SQL01 Table 1 – Alias List If you or somebody set up connections via IP address, you deserve to have to go to each app and fix it by hand.  That is the only way to fix that particular foul-up. If have to deal with Named Instances either as a source or a target, then it gets more complicated.  The standard fix is to use the SQL Server Configuration Manager (or one of its earlier incarnations) to create a SQL client alias to redirect the connection.  This can be a pain installing and configuring the app on multiple client servers.  The good news is that SQL Server Configuration Manager AND all of its earlier versions simply write a few registry keys.  Extracting the keys into a .reg file makes centralized automated deployment a snap. If the client is a 32-bit system, you have to extract the native key.  If it is a 64-bit, you have to extract the native key and the WoW (32 bit on 64 bit host) key. First, pick a development system to create the actual registry key.  If you do this repeatedly, you can simply edit an existing registry file.  Create the entry using the SQL Configuration Manager.  You must use a 64-bit system to create the WoW key.  The following example redirects from a named instance “SQL01\SQLUtiluty” to a default instance on “SQL02”.   Figure 3 – SQL Server Configuration Manager - Native Figure 3 shows the native key listing. Figure 4 – SQL Server Configuration Manager – WoW If you think you don’t need the WoW key because your app is 64 it, think again.  SQL Server Management Server is a 32-bit app, as are most SQL test utilities.  Always create both keys for 64-bit target systems. Now that the keys exist, we can extract them into a .reg file. Fire up REGEDIT and browse to the following location:  HKLM\Software\Microsoft\MSSQLServer\Client\ConnectTo.  You can also search the registry for the string value of one of the server names (old or new). Right click on the “ConnectTo” label and choose “Export”.  Save with an appropriate name and location.  The resulting file should look something like this: Figure 5 – SQL01_Alias.reg Repeat the process with the location: HKLM\Software\Wow6432Node\Microsoft\MSSQLServer\Client\ConnectTo Note that if you have multiple alias entries, ALL of the entries will be exported.  In that case, you can edit the file and remove the extra aliases. You can edit the files together into a single file.  Just leave a blank line between new keys like this: Figure 6 – SQL01_Alias_All.reg Of course if you have an automatic way to deploy, it makes sense to have an automatic way to Un-deploy.  To delete a registry key, simply edit the .reg file and replace the target with a “-“ sign like so. Figure 7 – SQL01_Alias_UNDO.reg Now we have the ability to move any database to any server without having to install or change any applications on any client server.  The whole process should be transparent to the applications, which makes planning and coordinating database moves a far simpler task.

    Read the article

  • Connection Pooling is Busted

    - by MightyZot
    A few weeks ago we started getting complaints about performance in an application that has performed very well for many years.  The application is a n-tier application that uses ADODB with the SQLOLEDB provider to talk to a SQL Server database.  Our object model is written in such a way that each public method validates security before performing requested actions, so there is a significant number of queries executed to get information about file cabinets, retrieve images, create workflows, etc.  (PaperWise is a document management and workflow system.)  A common factor for these customers is that they have remote offices connected via MPLS networks. Naturally, the first thing we looked at was the query performance in SQL Profiler.  All of the queries were executing within expected timeframes, most of them were so fast that the duration in SQL Profiler was zero.  After getting nowhere with SQL Profiler, the situation was escalated to me.  I decided to take a peek with Process Monitor.  Procmon revealed some “gaps” in the TCP/IP traffic.  There were notable delays between send and receive pairs.  The send and receive pairs themselves were quite snappy, but quite often there was a notable delay between a receive and the next send.  You might expect some delay because, presumably, the application is doing some thinking in-between the pairs.  But, comparing the procmon data at the remote locations with the procmon data for workstations on the local network showed that the remote workstations were significantly delayed.  Procmon also showed a high number of disconnects. Wireshark traces showed that connections to the database were taking between 75ms and 150ms.  Not only that, but connections to a file share containing images were taking 2 seconds!  So, I asked about a trust.  Sure enough there was a trust between two domains and the file share was on the second domain.  Joining a remote workstation to the domain hosting the share containing images alleviated the time delay in accessing the file share.  Removing the trust had no affect on the connections to the database. Microsoft Network Monitor includes filters that parse TDS packets.  TDS is the protocol that SQL Server uses to communicate.  There is a certificate exchange and some SSL that occurs during authentication.  All of this was evident in the network traffic.  After staring at the network traffic for a while, and examining packets, I decided to call it a night.  On the way home that night, something about the traffic kept nagging at me.  Then it dawned on me…at the beginning of the dance of packets between the client and the server all was well.  Connection pooling was working and I could see multiple queries getting executed on the same connection and ethereal port.  After a particular query, connecting to two different servers, I noticed that ADODB and SQLOLEDB started making repeated connections to the database on different ethereal ports.  SQL Server would execute a single query and respond on a port, then open a new port and execute the next query.  Connection pooling appeared to be broken. The next morning I wrote a test to confirm my hypothesis.  Turns out that the sequence causing the connection nastiness goes something like this: Make a connection to the database. Open a result set that returns enough records to require multiple roundtrips to the server. For each result, query for some other data in the database (this will open a new implicit connection.) Close the inner result set and repeat for every item in the original result set. Close the original connection. Provided that the first result set returns enough data to require multiple roundtrips to the server, ADODB and SQLOLEDB will start making new connections to the database for each query executed in the loop.  Originally, I thought this might be due to Microsoft’s denial of service (ddos) attack protection.  After turning those features off to no avail, I eventually thought to switch my queries to client-side cursors instead of server-side cursors.  Server-side cursors are the default, by the way.  Voila!  After switching to client-side cursors, the disconnects were gone and the above sequence yielded two connections as expected. While the real problem is the amount of time it takes to make connections over these MPLS networks (100ms on average), switching to client-side cursors made the problem go away.  Believe it or not, this is actually documented by Microsoft, and rather difficult to find.  (At least it was while we were trying to troubleshoot the problem!)  So, if you’re noticing performance issues on slower networks, or networks with slower switching, take a look at the traffic in a tool like Microsoft Network Monitor.  If you notice a high number of disconnects, and you’re using fire-hose or server-side cursors, then try switching to client-side cursors and you may see the problem go away. Most likely, Microsoft believes this to be appropriate behavior, because ADODB can’t guarantee that all of the data has been retrieved when you execute the inner queries.  I’m not convinced, though, because the problem remains even after replacing all of the implicit connections with explicit connections and closing those connections in-between each of the inner queries.  In that case, there doesn’t seem to be a reason why ADODB can’t use a single connection from the connection pool to make the additional queries, bringing the total number of connections to two.  Instead ADO appears to make an assumption about the state of the connection. I’ve reported the behavior to Microsoft and am awaiting to hear from the appropriate team, so that I can demonstrate the problem.  Maybe they can explain to us why this is appropriate behavior.  :)

    Read the article

  • Configuring Expert Search in Communicator 14 and SharePoint 2010

    Communicator 14 provides functionality to be able to search for contacts not just by name, but by skill.  For example a customer service agent at an airline can search for other agents with Travel Advisory experience by typing the search criteria into the Communicator search box and performing a search by keyword.  The search results will return users who have specified that skill in their profile on their SharePoint My Site.  This is actually pretty easy to configure, Ill show you how. Create Search and People Search Results Pages in SharePoint Communicator 14 Expert Search works by using the SharePoint 2010 Search Service to search SharePoint for user profiles with matching keywords.  This requires that you have an Enterprise Search site in your site collection which includes the search service and also the People Results pages.  The easiest way to do this is to create a Search Center site in your site collection. Note: I get an error when trying to create an Enterprise Search site in a Team Site in the SharePoint 2010 RTM bits, so I created it as a site collection that is evident in the URLs you see below. In the screenshots below, you can see that the URL of the SharePoint search service in the Search site collection is http://sps2010/sites/search/_vti_bin/search.asmx, and the URL of the People Search Results page is http://sps2010/sites/Search/Pages/peopleresults.aspx. Point Communications Server 14 to Search and People Search Results Pages For Communicator 14 to be able to perform an Expert Search, you need to configure Communications Server 14 to point to the Search Service and People Search Results page URLs. From a server with the OCS Core bits installed, fire up the Communications Server Management Shell and type Get-CsClientPolicy. Scroll down to the bottom of the output, were interested in setting the values of: SPSearchInternalURL SPSearchExternalURL SPSearchCenterInternalURL SPSearchCenterExternalURL SPSearchInternalURL and SPSearchExternalURL correspond to the internal and external URLs of the SharePoint search service in the Search site collection, while SPSearchCenterInternalURL and SPSearchCenterExternalURL correspond to the internal and external URLs of the people search results pages. Well use the Communications Server Management Shell to set the values of these CS policy properties. For simplicity, Im only going to set the internal URLs here. Set-CsClientPolicy SPSearchInternalURL http://sps2010/sites/search/_vti_bin/search.asmx     -SPSearchCenterInternalURL http://sps2010/sites/Search/Pages/peopleresults.aspx Log out and back into Communicator.  You can verify that these settings were applied by running the Get-CsClientPolicy cmdlet again from the Communications Server Management Shell. However, theres another super-secret ninja trick to verify that the settings were applied: Find the Communicator icon in the Windows System Tray Hold down the Ctrl button Click (left) the Communicator icon in the Windows System Tray do not depress the Ctrl button You should now see an extra menu item called Configuration Information, click it. Scroll down and locate the Expert Search URL and SharePoint Search Center URL keys and verify that their values correspond to those you set using the Set-CsClientPolicy PowerShell cmdlet. Configure a Sharepoint User Profile Import Im not going to provide detailed steps here except to say that you need to configure the SharePoint 2010 User Profile  Service Application to import user account details from Active Directory on a scheduled basis. This is a critical step because there are several user profile properties e.g. SipAddress that are only populated by a user profile import.  When performing an Expert Search, Communicator can only render results for users who have a SipAddress specified. Add Skills to User Profiles Navigate to your My Site and click on My Profile.  This page allows you to set many contact details that are searchable in SharePoint.  Were particularly interested in the Ask Me About property of a users profile.  Expert Search searches against this property to find users with matching skills. Configure a SharePoint Search Crawl Ensure that you have a scheduled job to crawl your Local SharePoint Sites content source.  Depending on how you have this configured, it will also crawl the My Site site collection and add user properties such as Ask Me About to the search index. Thats It! SharePoint 2010 provides new social and collaboration features to help users find other users with similar skills or interests. Expert Search extends this functionality directly into Microsoft Communicator 14, allowing you to interact with the users directly from the search results. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Guest Post: Instantiate SharePoint Workflow On Item Deleted

    - by Brian Jackett
    In this post, guest author Lucas Eduardo Silva will walk you through the steps of instantiating a workflow using an item event receiver from a custom list.  The ItemDeleting event will require approval via the workflow. Foreword     As you may have read recently, I injured my right hand and have had it in a cast for the past 3 weeks.  Due to this I planned to reduce my blogging while my hand heals.  As luck would have it, I was actually approached by someone who asked if they could be a guest author on my blog.  I’ve never had a guest author, but considering my injury now seemed like as good a time as ever to try it out. About the Guest Author     Lucas Eduardo Silva (email) works for CPM Braxis, a sibling company to my employer Sogeti in the CapGemini family.  Lucas and I exchanged emails a few times after one of my  recent posts and continued into various topics.  When I posted that I had injured my hand, Lucas mentioned that he had a post idea that he would like to publish and asked if it could be published on my blog.  The below content is the result of that collaboration. The Problem     Lucas has a big problem.  He has a workflow that he wants to fire every time an item is deleted from a custom list. He has already created the association in the "item deleting event", but needs to approve the deletion but the workflow is finishing first. Lucas put an onWorkflowItemChanged wait for the change of status approval, but it is not being hit. The Solution Note: This solution assumes you have the Visual Studio Extensions for Windows SharePoint Services (VSeWSS) installed to access the SharePoint project templates within VIsual Studio. 1 - Create a workflow that will be activated by ItemEventReceiver. 2 - Create the list by Visual Studio clicking in File -> New -> Project. Select SharePoint, then List Definition. 3 - Select the type of document to be created. List, Document Library, Wiki, Tasks, etc.. 4 - Visual Studio creates the file ItemEventReceiver.cs with all possible events in a list. 5 – In the workflow project, open the workflow.xml and copy the ID. 6 - Uncomment the ItemDeleting and insert the following code by replacing the ID that you copied earlier.   //Cancel the Exclusion properties.Cancel = true;   //Activating Exclusion Workflow SPWorkflowManager workflowManager = properties.ListItem.Web.Site.WorkflowManager;   SPWorkflowAssociation wfAssociation = properties.ListItem.ParentList.WorkflowAssociations. GetAssociationByBaseID(new Guid("37b5aea8-792a-4ded-be25-d283d9fe1f9d"));   workflowManager.StartWorkflow(properties.ListItem, wfAssociation, wfAssociation.AssociationData, true);   properties.Status = SPEventReceiverStatus.CancelNoError;   7 - properties.Cancel cancels the event being activated and executes the code that is inside the event. In the example, it cancels the deletion of the item to start the workflow that will be active as an association list with the workflow ID. 8 - Create and deploy the workflow and the list for SharePoint. 9 - Create a list through the model that was created. 10 - Enable the workflow in the list and Congratulations! Every time you try to delete the item the workflow is activated. TIP: If you really want to delete the item after the workflow is done you will have to delete the item by the workflow.   this.workflowProperties.Site.AllowUnsafeUpdates = true; this.workflowProperties.Item.Delete(); this.workflowProperties.List.Update();   Conclusion     In this guest post Lucas took you through the steps of creating an item deletion approval workflow with an event receiver.  This was also the first time I’ve had a guest author on this blog.  Many thanks to Lucas for putting together this content and offering it.  I haven’t decided how I’d handle future guest authors, mostly because I don’t know if there are others who would want to submit content.  If you do have something that you would like to guest author on my blog feel free to drop me a line and we can discuss.  As a disclaimer, there are no guarantees that it will be published though.  For now enjoy Lucas’ post and look for my return to regular blogging soon.         -Frog Out   <Update 1> If you wish to contact Lucas you can reach him at [email protected] </Update 1>

    Read the article

  • User is trying to leave! Set at-least confirm alert on browser(tab) close event!!

    - by kaushalparik27
    This is something that might be annoying or irritating for end user. Obviously, It's impossible to prevent end user from closing the/any browser. Just think of this if it becomes possible!!!. That will be a horrible web world where everytime you will be attacked by sites and they will not allow to close your browser until you confirm your shopping cart and do the payment. LOL:) You need to open the task manager and might have to kill the running browser exe processes.Anyways; Jokes apart, but I have one situation where I need to alert/confirm from the user in any anyway when they try to close the browser or change the url. Think of this: You are creating a single page intranet asp.net application where your employee can enter/select their TDS/Investment Declarations and you wish to at-least ALERT/CONFIRM them if they are attempting to:[1] Close the Browser[2] Close the Browser Tab[3] Attempt to go some other site by Changing the urlwithout completing/freezing their declaration.So, Finally requirement is clear. I need to alert/confirm the user what he is going to do on above bulleted events. I am going to use window.onbeforeunload event to set the javascript confirm alert box to appear.    <script language="JavaScript" type="text/javascript">        window.onbeforeunload = confirmExit;        function confirmExit() {            return "You are about to exit the system before freezing your declaration! If you leave now and never return to freeze your declaration; then they will not go into effect and you may lose tax deduction, Are you sure you want to leave now?";        }    </script>See! you are halfway done!. So, every time browser unloads the page, above confirm alert causes to appear on front of user like below:By saying here "every time browser unloads the page"; I mean to say that whenever page loads or postback happens the browser onbeforeunload event will be executed. So, event a button submit or a link submit which causes page to postback would tend to execute the browser onbeforeunload event to fire!So, now the hurdle is how can we prevent the alert "Not to show when page is being postback" via any button/link submit? Answer is JQuery :)Idea is, you just need to set the script reference src to jQuery library and Set the window.onbeforeunload event to null when any input/link causes a page to postback.Below will be the complete code:<head runat="server">    <title></title>    <script src="jquery.min.js" type="text/javascript"></script>    <script language="JavaScript" type="text/javascript">        window.onbeforeunload = confirmExit;        function confirmExit() {            return "You are about to exit the system before freezing your declaration! If you leave now and never return to freeze your declaration; then they will not go into effect and you may lose tax deduction, Are you sure you want to leave now?";        }        $(function() {            $("a").click(function() {                window.onbeforeunload = null;            });            $("input").click(function() {                window.onbeforeunload = null;            });        });    </script></head><body>    <form id="form1" runat="server">    <div></div>    </form></body></html>So, By this post I have tried to set the confirm alert if user try to close the browser/tab or try leave the site by changing the url. I have attached a working example with this post here. I hope someone might find it helpful.

    Read the article

  • Playing with aspx page cycle using JustMock

    - by mehfuzh
    In this post , I will cover a test code that will mock the various elements needed to complete a HTTP page request and  assert the expected page cycle steps. To begin, i have a simple enumeration that has my predefined page steps: public enum PageStep {     PreInit,     Load,     PreRender,     UnLoad } Once doing so, i  first created the page object [not mocking]. Page page = new Page(); Here, our target is to fire up the page process through ProcessRequest call, now if we take a look inside the method with reflector.net,  the call trace will go like : ProcessRequest –> ProcessRequestWithNoAssert –> SetInstrinsics –> Finallly ProcessRequest. Inside SetInstrinsics ,  it requires calls from HttpRequest, HttpResponse and HttpBrowserCababilities. Using this clue at hand, we can easily know the classes / calls  we need to mock in order to get through the expected call. Accordingly, for  HttpBrowserCapabilities our required mock code will look like: var browser = Mock.Create<HttpBrowserCapabilities>(); // Arrange Mock.Arrange(() => browser.PreferredRenderingMime).Returns("text/html"); Mock.Arrange(() => browser.PreferredResponseEncoding).Returns("UTF-8"); Mock.Arrange(() => browser.PreferredRequestEncoding).Returns("UTF-8"); Now, HttpBrowserCapabilities is get though [Instance]HttpRequest.Browser. Therefore, we create the HttpRequest mock: var request = Mock.Create<HttpRequest>(); Then , add the required get call : Mock.Arrange(() => request.Browser).Returns(browser); As, [instance]Browser.PerferrredResponseEncoding and [instance]Browser.PreferredResponseEncoding  are also set to the request object and to make that they are set properly, we can add the following lines as well [not required though]. bool requestContentEncodingSet = false; Mock.ArrangeSet(() => request.ContentEncoding = Encoding.GetEncoding("UTF-8")).DoInstead(() =>  requestContentEncodingSet = true); Similarly, for response we can write:  var response = Mock.Create<HttpResponse>();    bool responseContentEncodingSet = false;  Mock.ArrangeSet(() => response.ContentEncoding = Encoding.GetEncoding("UTF-8")).DoInstead(() => responseContentEncodingSet = true); Finally , I created a mock of HttpContext and set the Request and Response properties that will returns the mocked version. var context = Mock.Create<HttpContext>();   Mock.Arrange(() => context.Request).Returns(request); Mock.Arrange(() => context.Response).Returns(response); As, Page internally calls RenderControl method , we just need to replace that with our one and optionally we can check if  invoked properly: bool rendered = false; Mock.Arrange(() => page.RenderControl(Arg.Any<HtmlTextWriter>())).DoInstead(() => rendered = true); That’s  it, the rest of the code is simple,  where  i asserted the page cycle with the PageSteps that i defined earlier: var pageSteps = new Queue<PageStep>();   page.PreInit +=delegate { pageSteps.Enqueue(PageStep.PreInit); }; page.Load += delegate { pageSteps.Enqueue(PageStep.Load); }; page.PreRender += delegate { pageSteps.Enqueue(PageStep.PreRender);}; page.Unload +=delegate { pageSteps.Enqueue(PageStep.UnLoad);};   page.ProcessRequest(context);   Assert.True(requestContentEncodingSet); Assert.True(responseContentEncodingSet); Assert.True(rendered);   Assert.Equal(pageSteps.Dequeue(), PageStep.PreInit); Assert.Equal(pageSteps.Dequeue(), PageStep.Load); Assert.Equal(pageSteps.Dequeue(), PageStep.PreRender); Assert.Equal(pageSteps.Dequeue(), PageStep.UnLoad);   Mock.Assert(request); Mock.Assert(response); You can get the test class shown in this post here to give a try by yourself with of course JustMock :-). Enjoy!!

    Read the article

  • Monitoring almost anything with BizTalk 360

    - by Michael Stephenson
    When you work in an integration environment it is common that you will find yourself in a situation where you integrate with some unusual applications or have some unusual dependencies. That is the nature of integration. When you work with BizTalk one of the common problems is that BizTalk often is the place where problems with applications you integrate with are highlighted and these external applications may have poor monitoring solutions. Fortunately if you are a working with a customer who uses BizTalk 360 then it contains a feature called the "Web Endpoint Manager". Typically the web endpoint manager is used to monitor web services that you integrate with and will ping them at appropriate times to make sure they return the expected HTTP status code. When you have an usual situation where you want to monitor something which is key to the success to your solution but you find yourself having to consider a significant custom solution to monitor the external dependency then the Web Endpoint Manager could be your friend. The endpoint manager monitors a url and checks for a certain status code. This means that you can create your own aspx web page and then make BizTalk 360 monitor this web page. Behind the web page you could write any code you wished. An example of this is architecture is shown in the below diagram.     In the custom web page you would implement some custom code to do whatever it is that you want to monitor. In the below code snippet you can see how the Page_Load default method is doing some kind of check then depending on the result of the check it returns a certain HTTP code. protected void Page_Load(object sender, EventArgs e) { var result = CheckSomething();   if (result == "Success") Response.StatusCode = 202; else if (result == "DatabaseError") Response.StatusCode = 510; else if (result == "SystemError") Response.StatusCode = 512; else Response.StatusCode = 513;   }   In BizTalk 360 you would go into the Monitor and Notify tab and then to BizTalk Environment which gives you access to the Web Endpoint Manager. You need an alarm setup which configures how the endpoint will be checked. I'm not going to go through the details of creating the alarm as this is already documented in the BizTalk 360 documentation. One point to note is that in the example I am using I setup a threshold alarm which means that the url is checked about every minute and if there is an error that persists for a period of time then the alarm will raise the alert notification. In my example I configured the alarm to fire if the error persisted for 3 minutes. The below picture shows accessing the endpoint manager.   In the web endpoint manager you would then configure your endpoint to monitor and the HTTP response code which indicates all is working fine. The below picture shows this. I now have my endpoint monitoring setup and BizTalk 360 should be checking my custom endpoint to see that it is available. If I wanted to manually sanity check that the endpoints I have registered are working fine then clicking the Refresh button will show if they are all good or not. If my custom ASP.net page which is checking my dependency gets a problem you will see in the endpoint manager that the status code does not match the expected return code and your endpoints will display in red and you can see the problem. The below picture shows this. If I use specific HTTP response codes for the errors the custom ASP.net page might encounter I can easily interpret these to know what the problem is. Using the alarms and notifications with BizTalk 360 it means when your endpoint goes into an error state you can easily configure email or SMS notifications from BizTalk 360 to tell you that your endpoint is having problems and you can use BizTalk 360 to help correlate what the problem is to allow you to investigate further. Below you can see the email which tells me my endpoint is not working.   When everything returns to normal you will see the status is now fixed and you will see a situation like below where you can see the WebEndpoints are now green and the return code matches what is expected.   Conclusion As you can see it is really easy to plug your own custom ASP.net page into the BizTalk 360 web endpoint monitoring feature. This extension then gives you the power to really extend the monitoring to almost anything you want as long as you can write some .net code to check that the dependency is available and working. It would be interesting to hear of any ideas people have around things they would monitor with this extension. More details on the end point monitor can be found on the following link: http://www.biztalk360.com/tour/monitoring_notifications

    Read the article

  • Windows Workflow Foundation (WF) and things I wish were more intuitive

    - by pjohnson
    I've started using Windows Workflow Foundation, and so far ran into a few things that aren't incredibly obvious. Microsoft did a good job of providing a ton of samples, which is handy because you need them to get anywhere with WF. The docs are thin, so I've been bouncing between samples and downloadable labs to figure out how to implement various activities in a workflow. Code separation or not? You can create a workflow and activity in Visual Studio with or without code separation, i.e. just a .cs "Component" style object with a Designer.cs file, or a .xoml XML markup file with code behind (beside?) it. Absence any obvious advantage to one or the other, I used code separation for workflows and any complex custom activities, and without code separation for custom activities that just inherit from the Activity class and thus don't have anything special in the designer. So far, so good. Workflow Activity Library project type - What's the point of this separate project type? So far I don't see much advantage to keeping your custom activities in a separate project. I prefer to have as few projects as needed (and no fewer). The Designer's Toolbox window seems to find your custom activities just fine no matter where they are, and the debugging experience doesn't seem to be any different. Designer Properties - This is about the designer, and not specific to WF, but nevertheless something that's hindered me a lot more in WF than in Windows Forms or elsewhere. The Properties window does a good job of showing you property values when you hover the mouse over the values. But they don't do the same to find out what a control's type is. So maybe if I named all my activities "x1" and "x2" instead of helpful self-documenting names like "listenForStatusUpdate", then I could easily see enough of the type to determine what it is, but any names longer than those and all I get of the type is "System.Workflow.Act" or "System.Workflow.Compone". Even hitting the dropdown doesn't expand any wider, like the debugger quick watch "smart tag" popups do when you scroll through members. The only way I've found around this in VS 2008 is to widen the Properties dialog, losing precious designer real estate, then shrink it back down when you're done to see what you were doing. Really? WF Designer - This is about the designer, and I believe is specific to WF. I should be able to edit the XML in a .xoml file, or drag and drop using the designer. With WPF (at least in VS 2010 Ultimate), these are side by side, and changes to one instantly update the other. With WF, I have to right-click on the .xoml file, choose Open With, and pick XML Editor to edit the text. It looks like this is one way where WF didn't get the same attention WPF got during .NET Fx 3.0 development. Service - In the WF world, this is simply a class that talks to the workflow about things outside the workflow, not to be confused with how the term "service" is used in every other context I've seen in the Windows and .NET world, i.e. an executable that waits for events or requests from a client and services them (Windows service, web service, WCF service, etc.). ListenActivity - Such a great concept, yet so unintuitive. It seems you need at least two branches (EventDrivenActivity instances), one for your positive condition and one for a timeout. The positive condition has a HandleExternalEventActivity, and the timeout has a DelayActivity followed by however you want to handle the delay, e.g. a ThrowActivity. The timeout is simple enough; wiring up the HandleExternalEventActivity is where things get fun. You need to create a service (see above), and an interface for that service (this seems more complex than should be necessary--why not have activities just wire to a service directly?). And you need to create a custom EventArgs class that inherits from ExternalDataEventArgs--you can't create an ExternalDataEventArgs event handler directly, even if you don't need to add any more information to the event args, despite ExternalDataEventArgs not being marked as an abstract class, nor a compiler error nor warning nor any other indication that you're doing something wrong, until you run it and find that it always times out and get to check every place mentioned here to see why. Your interface and service need an event that consumes your custom EventArgs class, and a method to fire that event. You need to call that method from somewhere. Then you get to hope that you did everything just right, or that you can step through code in the debugger before your Delay timeout expires. Yes, it's as much fun as it sounds. TransactionScopeActivity - I had the bright idea of putting one in as a placeholder, then filling in the database updates later. That caused this error: The workflow hosting environment does not have a persistence service as required by an operation on the workflow instance "[GUID]". ...which is about as helpful as "Object reference not set to an instance of an object" and even more fun to debug. Google led me to this Microsoft Forums hit, and from there I figured out it didn't like that the activity had no children. Again, a Validator on TransactionScopeActivity would have pointed this out to me at design time, rather than handing me a nearly useless error at runtime. Easily enough, I disabled the activity and that fixed it. I still see huge potential in my work where WF could make things easier and more flexible, but there are some seriously rough edges at the moment. Maybe I'm just spoiled by how much easier and more intuitive development elsewhere in the .NET Framework is.

    Read the article

  • Android - Switching Activities with a Tab Layout

    - by Bill Osuch
    This post is based on the Tab Layout  tutorial on the Android developers site, with some modifications. I wanted to get rid of the icons (they take up too much screen real estate), and modify the fonts on the tabs. First, create a new Android project, with an Activity called TabWidget. Then, create two additional Activities called TabOne and TabTwo. Throw a simple TextView on each one with a message identifying the tab, like this: public class TabTwo extends Activity {  @Override  public void onCreate(Bundle savedInstanceState) {   super.onCreate(savedInstanceState);   TextView tv = new TextView(this);   tv.setText("This is tab 2");   setContentView(tv);  } } And don't forget to add them to your AndroidManifest.xml file: <activity android:name=".TabOne"></activity> <activity android:name=".TabTwo"></activity> Now we'll create the tab layout - open the res/layout/main.xml file and insert the following: <?xml version="1.0" encoding="utf-8"?> <TabHost xmlns:android="http://schemas.android.com/apk/res/android"  android:id="@android:id/tabhost"  android:layout_width="fill_parent"  android:layout_height="fill_parent">  <LinearLayout   android:orientation="vertical"   android:layout_width="fill_parent"   android:layout_height="fill_parent">   <TabWidget    android:id="@android:id/tabs"    android:layout_width="fill_parent"    android:layout_height="wrap_content" />   <FrameLayout    android:id="@android:id/tabcontent"             android:layout_width="fill_parent"    android:layout_height="fill_parent" />  </LinearLayout> </TabHost> Finally, we'll create the code needed to populate the TabHost. Make sure your TabWidget class extends TabActivity rather than Activity, and add code to grab the TabHost and create an Intent to launch a new Activity:    TabHost tabHost = getTabHost();  // The activity TabHost    TabHost.TabSpec spec;  // Reusable TabSpec for each tab    Intent intent;  // Reusable Intent for each tab       // Create an Intent to launch an Activity for the tab (to be reused)    intent = new Intent().setClass(this, TabOne.class); Add the first tab to the layout:    // Initialize a TabSpec for each tab and add it to the TabHost    spec = tabHost.newTabSpec("tabOne");      spec.setContent(intent);     spec.setIndicator("Tab One");     tabHost.addTab(spec); It's pretty tall as-is, so we'll shorten it:   // Squish the tab a little bit horizontally   tabHost.getTabWidget().getChildAt(0).getLayoutParams().height = 40; But the text is a little small, so let's increase the font size:   // Bump the text size up   LinearLayout ll = (LinearLayout) tabHost.getChildAt(0);   android.widget.TabWidget tw = (android.widget.TabWidget) ll.getChildAt(0);   RelativeLayout rllf = (RelativeLayout) tw.getChildAt(0);   TextView lf = (TextView) rllf.getChildAt(1);   lf.setTextSize(20); Do the same for the second tab, and you wind up with this: @Override     public void onCreate(Bundle savedInstanceState) {         super.onCreate(savedInstanceState);         setContentView(R.layout.main);                 TabHost tabHost = getTabHost();  // The activity TabHost         TabHost.TabSpec spec;  // Reusable TabSpec for each tab         Intent intent;  // Reusable Intent for each tab            // Create an Intent to launch an Activity for the tab (to be reused)         intent = new Intent().setClass(this, TabOne.class);         // Initialize a TabSpec for each tab and add it to the TabHost         spec = tabHost.newTabSpec("tabOne");           spec.setContent(intent);          spec.setIndicator("Tab One");          tabHost.addTab(spec);         // Squish the tab a little bit horizontally         tabHost.getTabWidget().getChildAt(0).getLayoutParams().height = 40;         // Bump the text size up         LinearLayout ll = (LinearLayout) tabHost.getChildAt(0);         android.widget.TabWidget tw = (android.widget.TabWidget) ll.getChildAt(0);         RelativeLayout rllf = (RelativeLayout) tw.getChildAt(0);         TextView lf = (TextView) rllf.getChildAt(1);         lf.setTextSize(20);            // Do the same for the other tabs         intent = new Intent().setClass(this, TabTwo.class);         spec = tabHost.newTabSpec("tabTwo");          spec.setContent(intent);          spec.setIndicator("Tab Two");         tabHost.addTab(spec);         tabHost.getTabWidget().getChildAt(1).getLayoutParams().height = 40;         RelativeLayout rlrf = (RelativeLayout) tw.getChildAt(1);         TextView rf = (TextView) rlrf.getChildAt(1);         rf.setTextSize(20);            tabHost.setCurrentTab(0);     } Save and fire up the emulator, and you should be able to switch back and forth between your tabs!

    Read the article

  • SPARC T4-4 Delivers World Record First Result on PeopleSoft Combined Benchmark

    - by Brian
    Oracle's SPARC T4-4 servers running Oracle's PeopleSoft HCM 9.1 combined online and batch benchmark achieved World Record 18,000 concurrent users while executing a PeopleSoft Payroll batch job of 500,000 employees in 43.32 minutes and maintaining online users response time at < 2 seconds. This world record is the first to run online and batch workloads concurrently. This result was obtained with a SPARC T4-4 server running Oracle Database 11g Release 2, a SPARC T4-4 server running PeopleSoft HCM 9.1 application server and a SPARC T4-2 server running Oracle WebLogic Server in the web tier. The SPARC T4-4 server running the application tier used Oracle Solaris Zones which provide a flexible, scalable and manageable virtualization environment. The average CPU utilization on the SPARC T4-2 server in the web tier was 17%, on the SPARC T4-4 server in the application tier it was 59%, and on the SPARC T4-4 server in the database tier was 35% (online and batch) leaving significant headroom for additional processing across the three tiers. The SPARC T4-4 server used for the database tier hosted Oracle Database 11g Release 2 using Oracle Automatic Storage Management (ASM) for database files management with I/O performance equivalent to raw devices. This is the first three tier mixed workload (online and batch) PeopleSoft benchmark also processing PeopleSoft payroll batch workload. Performance Landscape PeopleSoft HR Self-Service and Payroll Benchmark Systems Users Ave Response Search (sec) Ave Response Save (sec) Batch Time (min) Streams SPARC T4-2 (web) SPARC T4-4 (app) SPARC T4-2 (db) 18,000 0.944 0.503 43.32 64 Configuration Summary Application Configuration: 1 x SPARC T4-4 server with 4 x SPARC T4 processors, 3.0 GHz 512 GB memory 5 x 300 GB SAS internal disks 1 x 100 GB and 2 x 300 GB internal SSDs 2 x 10 Gbe HBA Oracle Solaris 11 11/11 PeopleTools 8.52 PeopleSoft HCM 9.1 Oracle Tuxedo, Version 10.3.0.0, 64-bit, Patch Level 031 Java Platform, Standard Edition Development Kit 6 Update 32 Database Configuration: 1 x SPARC T4-4 server with 4 x SPARC T4 processors, 3.0 GHz 256 GB memory 3 x 300 GB SAS internal disks Oracle Solaris 11 11/11 Oracle Database 11g Release 2 Web Tier Configuration: 1 x SPARC T4-2 server with 2 x SPARC T4 processors, 2.85 GHz 256 GB memory 2 x 300 GB SAS internal disks 1 x 100 GB internal SSD Oracle Solaris 11 11/11 PeopleTools 8.52 Oracle WebLogic Server 10.3.4 Java Platform, Standard Edition Development Kit 6 Update 32 Storage Configuration: 1 x Sun Server X2-4 as a COMSTAR head for data 4 x Intel Xeon X7550, 2.0 GHz 128 GB memory 1 x Sun Storage F5100 Flash Array (80 flash modules) 1 x Sun Storage F5100 Flash Array (40 flash modules) 1 x Sun Fire X4275 as a COMSTAR head for redo logs 12 x 2 TB SAS disks with Niwot Raid controller Benchmark Description This benchmark combines PeopleSoft HCM 9.1 HR Self Service online and PeopleSoft Payroll batch workloads to run on a unified database deployed on Oracle Database 11g Release 2. The PeopleSoft HRSS benchmark kit is a Oracle standard benchmark kit run by all platform vendors to measure the performance. It's an OLTP benchmark where DB SQLs are moderately complex. The results are certified by Oracle and a white paper is published. PeopleSoft HR SS defines a business transaction as a series of HTML pages that guide a user through a particular scenario. Users are defined as corporate Employees, Managers and HR administrators. The benchmark consist of 14 scenarios which emulate users performing typical HCM transactions such as viewing paycheck, promoting and hiring employees, updating employee profile and other typical HCM application transactions. All these transactions are well-defined in the PeopleSoft HR Self-Service 9.1 benchmark kit. This benchmark metric is the weighted average response search/save time for all the transactions. The PeopleSoft 9.1 Payroll (North America) benchmark demonstrates system performance for a range of processing volumes in a specific configuration. This workload represents large batch runs typical of a ERP environment during a mass update. The benchmark measures five application business process run times for a database representing large organization. They are Paysheet Creation, Payroll Calculation, Payroll Confirmation, Print Advice forms, and Create Direct Deposit File. The benchmark metric is the cumulative elapsed time taken to complete the Paysheet Creation, Payroll Calculation and Payroll Confirmation business application processes. The benchmark metrics are taken for each respective benchmark while running simultaneously on the same database back-end. Specifically, the payroll batch processes are started when the online workload reaches steady state (the maximum number of online users) and overlap with online transactions for the duration of the steady state. Key Points and Best Practices Two Oracle PeopleSoft Domain sets with 200 application servers each on a SPARC T4-4 server were hosted in 2 separate Oracle Solaris Zones to demonstrate consolidation of multiple application servers, ease of administration and performance tuning. Each Oracle Solaris Zone was bound to a separate processor set, each containing 15 cores (total 120 threads). The default set (1 core from first and third processor socket, total 16 threads) was used for network and disk interrupt handling. This was done to improve performance by reducing memory access latency by using the physical memory closest to the processors and offload I/O interrupt handling to default set threads, freeing up cpu resources for Application Servers threads and balancing application workload across 240 threads. See Also Oracle PeopleSoft Benchmark White Papers oracle.com SPARC T4-2 Server oracle.com OTN SPARC T4-4 Server oracle.com OTN PeopleSoft Enterprise Human Capital Management oracle.com OTN PeopleSoft Enterprise Human Capital Management (Payroll) oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Oracle's PeopleSoft HR and Payroll combined benchmark, www.oracle.com/us/solutions/benchmark/apps-benchmark/peoplesoft-167486.html, results 09/30/2012.

    Read the article

  • Mocking HttpContext with JustMock

    - by mehfuzh
    In post , i will show a test code that will mock the various elements needed to complete a HTTP page request and  assert the expected page cycle steps. To begin, i have a simple enumeration that has my predefined page steps: public enum PageStep {     PreInit,     Load,     PreRender,     UnLoad } Once doing so, i  first created the page object [not mocking]. Page page = new Page(); Here, our target is to fire up the page process though ProcessRequest call, now if we take a look inside method though reflector, we will find calls stack like : ProcessRequest –> ProcessRequestWithNoAssert –> SetInstrinsics –> Finallly ProcessRequest. Inside SetIntrinsics , where it requires calls from HttpRequest, HttpResponse and HttpBrowserCababilities. With this , we can easily know what are classes / calls  we need to mock in order to get though the expected call. Accordingly, for  HttpBrowserCapabilities our required test code will look like: Mock.Arrange(() => browser.PreferredRenderingMime).Returns("text/html"); Mock.Arrange(() => browser.PreferredResponseEncoding).Returns("UTF-8"); Mock.Arrange(() => browser.PreferredRequestEncoding).Returns("UTF-8"); Now, HttpBrowserCapabilities is get though [Instance]HttpRequest.Browser. Therefore, we create the HttpRequest mock: var request = Mock.Create<HttpRequest>(); Then , add the required get call : Mock.Arrange(() => request.Browser).Returns(browser); As, [instance]Browser.PerferrredResponseEncoding and [instance]Browser.PreferredResponseEncoding  are also set to the request object and to make that they are set properly, we can add the following lines as well [not required though]. bool requestContentEncodingSet = false; Mock.ArrangeSet(() => request.ContentEncoding = Encoding.GetEncoding("UTF-8")).DoInstead(() =>  requestContentEncodingSet = true); Similarly, for response we can write:  var response = Mock.Create<HttpResponse>();    bool responseContentEncodingSet = false;  Mock.ArrangeSet(() => response.ContentEncoding = Encoding.GetEncoding("UTF-8")).DoInstead(() => responseContentEncodingSet = true); Finally , I created a mock of HttpContext and set the Request and Response properties that will returns the mocked version. var context = Mock.Create<HttpContext>();   Mock.Arrange(() => context.Request).Returns(request); Mock.Arrange(() => context.Response).Returns(response); As, Page internally calls RenderControl method , we just need to replace that with our one and optionally we can check if  invoked properly: bool rendered = false; Mock.Arrange(() => page.RenderControl(Arg.Any<HtmlTextWriter>())).DoInstead(() => rendered = true); That’s  it, the rest of the code is simple,  where  i asserted the page cycle with the PageSteps that i defined earlier: var pageSteps = new Queue<PageStep>();    page.PreInit +=      delegate      {          pageSteps.Enqueue(PageStep.PreInit);      };  page.Load +=      delegate      {          pageSteps.Enqueue(PageStep.Load);      };    page.PreRender +=      delegate      {          pageSteps.Enqueue(PageStep.PreRender);      };    page.Unload +=      delegate      {          pageSteps.Enqueue(PageStep.UnLoad);      };    page.ProcessRequest(context);    Assert.True(requestContentEncodingSet);  Assert.True(responseContentEncodingSet);  Assert.True(rendered);    Assert.Equal(pageSteps.Dequeue(), PageStep.PreInit);  Assert.Equal(pageSteps.Dequeue(), PageStep.Load);  Assert.Equal(pageSteps.Dequeue(), PageStep.PreRender);  Assert.Equal(pageSteps.Dequeue(), PageStep.UnLoad);    Mock.Assert(request);  Mock.Assert(response);   You can get the test class shown in this post here to give a try by yourself with of course JustMock. Enjoy!!

    Read the article

  • Great event : Microsoft Visual Studio 2010 Launch @ Microsoft TechEd Blore

    - by sathya
    Great event : Microsoft Visual Studio 2010 Launch @ Microsoft TechEd Blore   I was really excited on attending the day 1 of Microsoft TechEd 2010 in Bangalore. This is the first Teched that am attending. The event was really fun filled with lot of knowledge sharing sessions and lots of goodies and gifts by the partners Initially the Event Started by Murthy's Session. He explained about the Developers relating to the 5 elements of nature (Pancha Boothaas) 1. Fire - Passion 2. Wave (Water) - Catch the right wave which we need to apply. 3. Earth - Connections and lots of opportunities around the world 4. Air -  Its whatever we breathe. Developers.. Without them nothing is possible. they are like the air 5. Sky - Cloud based applications   Next the Keynote and the announcement of Visual Studio by SomaSegar. List of things that he delivered his speech on : 1. Announcement of Visual Studio 2010 2. Announcement of .NET 4.0 3. Announcement of Silverlight later this week 4. What is the current Trend? Microsoft has done a research with many developers across the globe and have got the following feedback from the users. Get Lost (interrupted) - When we do some work and somebody is calling or interrepting by someother way we lose track of what we were doing and we need to do from the start Falling Behind- Technology gets updated  phenomenally over a period of time and developers always have a scenario like they are not in the state of the art technology and they always have a doubt whether they are staying updated. Lack of Collobaration - When a Manager asks a person what the team members have done and some might be done and some might not be and finally all are into a state like we dont know where we are. So they have addressed these 3 points in the VS 2010 by the following features : Get Lost - Some cool features which could overcome this. We have some Graphical interface. which could show what we have done and where we are. Some Zoom features in the code level. Falling Behind - Everything is based on .NET language base. 2010 has been built in such a way that if developers know the native language that's enough for building good applications. Lack of Collobaration - Some Dashboard Features which would show where exactly the project is. And a graphical user interface is shown on clicking which it directly drills down even to the code level. 5. An overview on all new features in VS 2010. 6. Some good demos of new features in VS 2010 by Polita and one more girl. Some of the new features included : 1. Team Explorer 2. Zoom in Code 3. Ribbon Development 4. Development in Single Platform for Windows Phone, XBox, Zune, Azure, Web Based and Windows based applications 5. Sequence Diagram Generation directly from code 6. Dashboards to show project status 7. Javascript and JQuery intellisense 8. Native support for JQuery 9. Packaging feature while deploying. 10. Generation of different versions of web.config like Web.Config.Production, Web.Config.Staging, etc. 11. IntelliTrace - Eliminating the "Not Reproducible" statement. 12. Automated User Interface Testing. At last in the closing of the day we had a great event called Demo Extravaganza, where lot of cool projects that were launched by Microsoft and also the projects that are under research were also shown. I got a lot of info about Bing today. BING really rocks!!! It has the following : 1. Visual Search 2. Product based search. For each product different menu filters were provided to make an advanced search 3. BING Maps was awesome!! It zoomed in to the street level and we can assume that we are the persons who are walking or running on the road and we can see the real objects like buildings moving by our side. 4. PhotoSynth was used in BING to show up all the images taken around the globe in a 3D format. 5. Formula - If we give some formula it automatically gives the value for the variable or derivation of expression Also some info about some kool touch apps which does an authentication and computation of Teched Attendee's Points that they have scored and the sessions attended. One guy won an XBOX in lucky draw as a gift. There were lot of Partner Stalls like Accenture,Intel,Citrix,MicroFocus,Telerik,infragistics,Sapient etc. Some Offers were provided for us like 50% off on Certifications, 1 free Elearning Course, etc. Stay tuned!! Wil update you on other events too..

    Read the article

  • SQL SERVER – Recover the Accidentally Renamed Table

    - by pinaldave
    I have no answer to following question. I saw a desperate email marked as urgent delivered in my mailbox. “I accidentally renamed table in my SSMS. I was scrolling very fast and I made mistakes. It was either because I double clicked or clicked on F2 (shortcut key for renaming). However, I have made the mistake and now I have no idea how to fix this. I am in big trouble. Help me get my original tablename.” I have seen many similar scenarios in my life and they give me a very good opportunity to preach wisdom but when the house is burning, we cannot talk about how we should have conserved the water earlier. The goal at that point is to put off the fire as fast as we can. I decided to answer this email with my best knowledge. If you have renamed the table, I think you pretty much is out of luck. Here are few things which you can do which can give you idea about what your tablename can be if you are lucky. Method 1: (Not Recommended but try your luck) Check your naming convention of your system. I have often seen that many organizations name their index as IX_TableName_Colms or name their keys as FK_TableName1_TableName2_Cols. If your organization is following the same you can get the name from your table, you may refer your keys. Again, note that this is quite possible that your tablename was already renamed and your keys were not updated. This can easily lead you to select incorrect name. I think follow this if you are confident or move to the next method. Method 2: (Not Recommended but try your luck) This method is also based on your orgs naming convention. If you use the name of the table in any columnname (some organizations use tablename in their incremental identity column name), you can get that name from there. Method 3: (Not Recommended but try your luck) If you know where your table was used in your stored procedures, you can script your stored procedure and find the name of the table back. Method 4: (Try your luck) All the best organizations first create a data model of the schema and there is good chance that this table is used there, you should take your chances and refer original document. If your organization is good at managing docs or source code, you will get the name of the table back for sure. Method 5: (It WORKS but try on a development server) There is no sure way to get you the name of the table which you accidentally renamed however, there is one way which will work for sure. You need to take your latest full backup and restore it on your development server (remember not on production or where you have renamed this column). Now restore latest differential file of the full backup. Now restore all the log files one by one making sure that you are restoring before the point of time of you renamed the tablename. Now go to explore and this will give you the name of the table which you have renamed. If you are confident that the same table existed with the same name when the last full backup was made, you do not have to go to all the steps. You can just get the name of the table directly from last backup’s restore. Read the article about Backup Timeline. Wisdom: How can I miss to preach wisdom when I get the opportunity to do so? Here are a few points to remember. Use a different account to explore production environment. Do not use the same account which have all the rights and permissions all the time. Use the account which has read only permissions if there are no modification required. Use policy based management to prevent changes which are accidental. If there was policy of valid names, the accidental change of the table was not possible unless it was intentional delibarate changes. Have a proper auditing of the system in place. You can use DDL triggers but be careful with its usage (get it reviewed properly first). (Add your suggestion here) I guess Method 5 will work all the time (using point in time restore). Everything else is chance of luck and if you are lucky are bad – you will get further incorrect name. Now go back and read the first line of this blog. Out of five method four methods are just lucky guesses. The method 5 will work but again it is a lengthy process if the size of the database is huge or if you do not have full backup. Did I miss anything obvious? Please leave a comment and I will publish your answer with due credit. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Running a Mongo Replica Set on Azure VM Roles

    - by Elton Stoneman
    Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2013/10/15/running-a-mongo-replica-set-on-azure-vm-roles.aspxSetting up a MongoDB Replica Set with a bunch of Azure VMs is straightforward stuff. Here’s a step-by-step which gets you from 0 to fully-redundant 3-node document database in about 30 minutes (most of which will be spent waiting for VMs to fire up). First, create yourself 3 VM roles, which is the minimum number of nodes you need for high availability. You can use any OS that Mongo supports. This guide uses Windows but the only difference will be the mechanism for starting the Mongo service when the VM starts (Windows Service, daemon etc.) While the VMs are provisioning, download and install Mongo locally, so you can set up the replica set with the Mongo shell. We’ll create our replica set from scratch, doing one machine at a time (if you have a single node you want to upgrade to a replica set, it’s the same from step 3 onwards): 1. Setup Mongo Log into the first node, download mongo and unzip it to C:. Rename the folder to remove the version – so you have c:\MongoDB\bin etc. – and create a new folder for the logs, c:\MongoDB\logs. 2. Setup your data disk When you initialize a node in a replica set, Mongo pre-allocates a whole chunk of storage to use for data replication. It will use up to 5% of your data disk, so if you use a Windows VM image with a defsault 120Gb disk and host your data on C:, then Mongo will allocate 6Gb for replication. And that takes a while. Instead you can create yourself a new partition by shrinking down the C: drive in Computer Management, by say 10Gb, and then creating a new logical disk for your data from that spare 10Gb, which will be allocated as E:. Create a new folder, e:\data. 3. Start Mongo When that’s done, start a command line, point to the mongo binaries folder, install Mongo as a Windows Service, running in replica set mode, and start the service: cd c:\mongodb\bin mongod -logpath c:\mongodb\logs\mongod.log -dbpath e:\data -replSet TheReplicaSet –install net start mongodb 4. Open the ports Mongo uses port 27017 by default, so you need to allow access in the machine and in Azure. In the VM, open Windows Firewall and create a new inbound rule to allow access via port 27017. Then in the Azure Management Console for the VM role, under the Configure tab add a new rule, again to allow port 27017. 5. Initialise the replica set Start up your local mongo shell, connecting to your Azure VM, and initiate the replica set: c:\mongodb\bin\mongo sc-xyz-db1.cloudapp.net rs.initiate() This is the bit where the new node (at this point the only node) allocates its replication files, so if your data disk is large, this can take a long time (if you’re using the default C: drive with 120Gb, it may take so long that rs.initiate() never responds. If you’re sat waiting more than 20 minutes, start another instance of the mongo shell pointing to the same machine to check on it). Run rs.conf() and you should see one node configured. 6. Fix the host name for the primary – *don’t miss this one* For the first node in the replica set, Mongo on Windows doesn’t populate the full machine name. Run rs.conf() and the name of the primary is sc-xyz-db1, which isn’t accessible to the outside world. The replica set configuration needs the full DNS name of every node, so you need to manually rename it in your shell, which you can do like this: cfg = rs.conf() cfg.members[0].host = ‘sc-xyz-db1.cloudapp.net:27017’ rs.reconfig(cfg) When that returns, rs.conf() will have your full DNS name for the primary, and the other nodes will be able to connect. At this point you have a working database, so you can start adding documents, but there’s no replication yet. 7. Add more nodes For the next two VMs, follow steps 1 through to 4, which will give you a working Mongo database on each node, which you can add to the replica set from the shell with rs.add(), using the full DNS name of the new node and the port you’re using: rs.add(‘sc-xyz-db2.cloudapp.net:27017’) Run rs.status() and you’ll see your new node in STARTUP2 state, which means its initializing and replicating from the PRIMARY. Repeat for your third node: rs.add(‘sc-xyz-db3.cloudapp.net:27017’) When all nodes are finished initializing, you will have a PRIMARY and two SECONDARY nodes showing in rs.status(). Now you have high availability, so you can happily stop db1, and one of the other nodes will become the PRIMARY with no loss of data or service. Note – the process for AWS EC2 is exactly the same, but with one important difference. On the Azure Windows Server 2012 base image, the MongoDB release for 64-bit 2008R2+ works fine, but on the base 2012 AMI that release keeps failing with a UAC permission error. The standard 64-bit release is fine, but it lacks some optimizations that are in the 2008R2+ version.

    Read the article

  • Playing with http page cycle using JustMock

    - by mehfuzh
    In this post , I will cover a test code that will mock the various elements needed to complete a HTTP page request and  assert the expected page cycle steps. To begin, i have a simple enumeration that has my predefined page steps: public enum PageStep {     PreInit,     Load,     PreRender,     UnLoad } Once doing so, i  first created the page object [not mocking]. Page page = new Page(); Here, our target is to fire up the page process through ProcessRequest call, now if we take a look inside the method with reflector.net,  the call trace will go like : ProcessRequest –> ProcessRequestWithNoAssert –> SetInstrinsics –> Finallly ProcessRequest. Inside SetInstrinsics ,  it requires calls from HttpRequest, HttpResponse and HttpBrowserCababilities. With this clue at hand, we can easily know the classes / calls  we need to mock in order to get through the expected call. Accordingly, for  HttpBrowserCapabilities our required test code will look like: Mock.Arrange(() => browser.PreferredRenderingMime).Returns("text/html"); Mock.Arrange(() => browser.PreferredResponseEncoding).Returns("UTF-8"); Mock.Arrange(() => browser.PreferredRequestEncoding).Returns("UTF-8"); Now, HttpBrowserCapabilities is get though [Instance]HttpRequest.Browser. Therefore, we create the HttpRequest mock: var request = Mock.Create<HttpRequest>(); Then , add the required get call : Mock.Arrange(() => request.Browser).Returns(browser); As, [instance]Browser.PerferrredResponseEncoding and [instance]Browser.PreferredResponseEncoding  are also set to the request object and to make that they are set properly, we can add the following lines as well [not required though]. bool requestContentEncodingSet = false; Mock.ArrangeSet(() => request.ContentEncoding = Encoding.GetEncoding("UTF-8")).DoInstead(() =>  requestContentEncodingSet = true); Similarly, for response we can write:  var response = Mock.Create<HttpResponse>();    bool responseContentEncodingSet = false;  Mock.ArrangeSet(() => response.ContentEncoding = Encoding.GetEncoding("UTF-8")).DoInstead(() => responseContentEncodingSet = true); Finally , I created a mock of HttpContext and set the Request and Response properties that will returns the mocked version. var context = Mock.Create<HttpContext>();   Mock.Arrange(() => context.Request).Returns(request); Mock.Arrange(() => context.Response).Returns(response); As, Page internally calls RenderControl method , we just need to replace that with our one and optionally we can check if  invoked properly: bool rendered = false; Mock.Arrange(() => page.RenderControl(Arg.Any<HtmlTextWriter>())).DoInstead(() => rendered = true); That’s  it, the rest of the code is simple,  where  i asserted the page cycle with the PageSteps that i defined earlier: var pageSteps = new Queue<PageStep>();   page.PreInit +=      delegate      {          pageSteps.Enqueue(PageStep.PreInit);      }; page.Load +=      delegate      {          pageSteps.Enqueue(PageStep.Load);      };   page.PreRender +=      delegate      {          pageSteps.Enqueue(PageStep.PreRender);      };   page.Unload +=      delegate      {          pageSteps.Enqueue(PageStep.UnLoad);      };   page.ProcessRequest(context);    Assert.True(requestContentEncodingSet);  Assert.True(responseContentEncodingSet);  Assert.True(rendered);    Assert.Equal(pageSteps.Dequeue(), PageStep.PreInit);  Assert.Equal(pageSteps.Dequeue(), PageStep.Load);  Assert.Equal(pageSteps.Dequeue(), PageStep.PreRender);  Assert.Equal(pageSteps.Dequeue(), PageStep.UnLoad);    Mock.Assert(request);  Mock.Assert(response);   You can get the test class shown in this post here to give a try by yourself with of course JustMock :-).   Enjoy!!

    Read the article

  • Simple Scripting for your Exalogic Storage

    - by Trond Strømme
    As part of my job in Oracle ACS (Advanced Customer Services) I'm handling lots of different systems and customers. Among the recent systems I worked with have been Oracle's Exalogic engineered systems. One of the things I'd never had much exposure to as a system developer/architect/middleware guy/Java dude has been storage; outside of consuming it for my photography needs.. Well, I'm always ready for a new challenge... I'd downloaded the 7000 series storage simulator when it was released in the good old Sun days, found it fun and instructive to play around with, but as I never touched storage in any way (besides consuming it..) I forgot about it. A couple of years ago when I started working with Exalogic engineered systems it again came into light as an invaluable learning and testing tool for the embedded storage in an Exalogic;  Oracle's Sun ZFS Storage 7320 Appliance.  aaaanyway... I've been "booted" into a part-time role as the interim storage/system admin/middleware/Java guy for a client and found I needed to create the occasional report or summary or whatever.. of what's using the storage in the 7320 (as default configured for an Exalogic, 40T of disk in a mirrored configuration, yielding 18T of actual space.) Reading the nice documentation and some articles on the Oracle Technology Network I saw great possibilities with the embedded ECMAScript3/JavaScript engine in the 7000 series.  In my personal opinion anyone who's dealing with Exalogic administration, or exposed to any of the 7000 series of storage appliances and servers that Oracle offers should have a VirtualBox instance of it kicking around. For development and testing it's a fantastic tool. (It can save you from explaining (most) of the embarrassing FAILS you can do if you test something in a production system to your management...) So download, and install.  A small sidestep, if after firing up the 7000 series simulator in VirtualBox you've forgotten what it's IP address is, the following will sort you out if you log in directly via the running VirtualBox VM. So in my case I can ssh to 192.168.56.101 or point a browser to https://192.168.56.101:215 to log into the storage appliance. One simple way of executing a script on the 7320 is to ssh to the device and redirecting a file with the script in it to ssh. ssh [email protected] < myscript.js One question I got from my client and the people who will take over the systems was: "how can we see the quotas and allocations for all projects/shares in one easy go so we don't have to go navigating around in the BUI for all the hundreds of shares the 7320 is hosting just to check if anything is running dry?" Easy! JavaScript time, VirtualBox and emacs! //NOTE! this script is available 'as is' It has ben run on a couple of 7320's, (running 2010.08.17.3.0,1-1.25 & // 2011.04.24.1.0,1-1.8) a 7420 and the VB image, but I personally //offer no guarantee whatsoever that it won't make your server topple, catch fire or in any way go pear shaped.. //run at your own risk or learn from my code and or mistakes.. script run('cd /'); run('shares'); //get all projects: proj = list(); function spaceToGig(bytes){ return bytes/1073741824; //convert bytes to GB } function fullInPercent(quota, space_data){ tmp = (space_data/quota)*100; return tmp; } //print header, slightly good looking printf(" %s/%-15s %8s(GB) %7s(GB) %5s(GB) %7s(GB) %3s\n","Project", "Share","Quota","Ref", "Snap", "Total","%full"); printf("-------------------------------------------------------------------------------\n") //for each project, get all shares. check for quota and calculate percentage and human readable figures.. for (i=0;i<proj.length;i++){ run('select ' + proj[i]); //get all shares for a project var pshares = list(); //for each share get quota properties for (j=0;j<pshares.length;j++){ run('select ' + pshares[j]); quota = get('quota'); //properties associated with a share or inherited from a project spaceData = get('space_data'); spaceSnap = get('space_snapshots'); spaceTotal = get('space_total'); if(quota>0){ //has quota printf(" %s/%-15s \t%4.2fGB\t%.2fGB\t%.2fGB\t%.2fGB\t%5.2f%%\n",proj[i], pshares[j],spaceToGig(quota),spaceToGig(spaceData),spaceToGig(spaceSnap),spaceToGig(spaceTotal),fullInPercent(quota,spaceTotal)); }else{ //no quota printf(" %s/%-15s \t%8s\t%.2fGB\t%.2fGB\t%.2fGB\t%s\n",proj[i],pshares[j], "N/A", spaceToGig(spaceData),spaceToGig(spaceSnap),spaceToGig(spaceTotal),"N/A"); } run('cd ..'); } run('done'); } The resulting output should look something like this: Project/Share Quota(GB) Ref(GB) Snap(GB) Total(GB) %full ------------------------------------------------------------------------------- ACSExalogicSystem/domains N/A 0.04GB 0.00GB 0.04GB N/A ACSExalogicSystem/logs N/A 0.01GB 0.00GB 0.01GB N/A ACSExalogicSystem/nodemgrs N/A 0.00GB 0.00GB 0.00GB N/A ACSExalogicSystem/stores N/A 0.04GB 0.00GB 0.04GB N/A ***_dev/FMW_***_1 133GB 4.24GB 0.01GB 4.25GB 3.19% ***_dev/FMW_***_2 N/A 4.25GB 0.01GB 4.26GB N/A ***_dev/applications 10GB 0.00GB 0.00GB 0.00GB 0.00% ***_dev/domains 50GB 10.75GB 3.55GB 14.30GB 28.61% ***_dev/logs 20GB 0.32GB 0.01GB 0.33GB 1.66% ***_dev/softwaredepot 20GB 4.15GB 0.00GB 4.15GB 20.73% ***_dev/stores 20GB 0.01GB 0.00GB 0.01GB 0.05% ###_dev/FMW_###_1 400GB 17.63GB 0.12GB 17.75GB 4.44% ###_dev/applications N/A 0.00GB 0.00GB 0.00GB N/A ###_dev/domains 120GB 14.21GB 5.53GB 19.74GB 16.45% ###_dev/logs 15GB 0.00GB 0.00GB 0.00GB 0.00% ###_dev/softwaredepot 250GB 73.55GB 0.02GB 73.57GB 29.43% …snip My apologies if the output is a bit mis-aligned here and there, I only bothered making it look good, not perfect :/ I also removed some of the project names (*,#)

    Read the article

  • Planning an Event&ndash;SPS NYC

    - by MOSSLover
    I bet some of you were wondering why I am not going to any events for the most part in June and July (aside from volunteering at SPS Chicago).  Well I basically have no life for the next 2 months.  We are approaching the 11th hour of SharePoint Saturday New York City.  The event is slated to have 350 to 400 attendees.  This is second year in a row I’ve helped run it with Jason Gallicchio.  It’s amazingly crazy how much effort this event requires versus Kansas City.  It’s literally 2x the volume of attendees, speakers, and sponsors plus don’t even get me started about volunteers.  So here is a bit of the break down… We have 30 volunteers+ that Tasha Scott from the Hampton Roads Area will be managing the day of the event to do things like timing the speakers, handing out food, making sure people don’t walk into the event that did not sign up until we get a count for fire code, registering people, watching the sharpees, watching the prizes, making sure attendees get to the right place,  opening and closing the partition in the big room, moving chairs, moving furniture, etc…Then there is Jason, Greg, and I who will be making sure that the speakers, sponsors, and everything is going smoothly in the background.  We need to make sure that everything is setup properly and in the right spot.  We also need to make sure signs are printed, schedules are created, bags are stuffed with sponsor material.  Plus we need to send out emails to sponsors reminding them to send us the right information to post on the site for charity sessions, send us boxes with material to stuff bags, and we need to make sure that Michael Lotter gets there information for invoicing.  We also need to check that Michael has invoiced everyone and who has paid, because we can’t order anything for the event without money.  Once people have paid we need to setup food orders, speaker and volunteer dinners, buy prizes, buy bags, buy speakers/volunteer/organizer shirts, etc…During this process we need all the abstracts from speakers, all the bios, pictures, shirt sizes, and other items so we can create schedules and order items.  We also need to keep track of who is attending the dinner the night before for volunteers and speakers and make sure we don’t hit capacity.  Then there is attendee tracking and making sure that we don’t hit too many attendees.  We need to make sure that attendees know where to go and what to do.  We have to make all kinds of random supply lists during this process and keep on track with a variety of lists and emails plus conference calls.  All in all it’s a lot of work and I am trying to keep track of it all the top so that we don’t duplicate anything or miss anything.  So basically all in all if you don’t see me around for another month don’t worry I do exist. Right now if you look at what I’m doing I am traveling every Monday morning and Thursday night back and forth to Washington DC from New Jersey.  Every night I am working on organizational stuff for SharePoint Saturday New York City.  Every Tuesday night we are running an event conference call.  Every weekend I am either with family or my boyfriend and cat trying hard not to touch the event.  So all my time is pretty much work, event, and family/boyfriend.  I have 0 bandwidth for anything in the community.  If you compound that with my severe allergy problems in DC and a doctor’s appointment every month plus a new med once a week I’m lucky I am still standing and walking.  So basically once July 30th hits hopefully Jason Gallicchio, Greg Hurlman, and myself will be able to breathe a little easier.  If I forget to do this thank you Greg and Jason.  Thank you Tom Daly.  Thank you Michael Lotter.  Thank you Tasha Scott.  Thank you Kevin Griffin.  Thank you all the volunteers, speakers, sponsors, and attendees who will and have made this event a success.  Hopefully, we have enough time until next year to regroup, recharge, and make the event grow bigger in a different venue.  Awesome job everyone we sole out within 3 days of registration and we still have several weeks to go.  Right now the waitlist is at 49 people with room to grow.  If you attend the event thank all these guys I mentioned above for making it possible.  It’s going to be awesome I know it but I probably won’t remember half of it due to the blur of things that we will all be taking care of the day of the event.  Catch you all in the end of July/Early August where I will attempt to post something useful and clever and possibly while wearing a fez. Technorati Tags: SPS NYC,SharePoint Saturday,SharePoint Saturday New York City

    Read the article

  • WPF Databinding- Part 2 of 3

    - by Shervin Shakibi
    This is a follow up to my previous post WPF Databinding- Not your fathers databinding Part 1-3 you can download the source code here  http://ssccinc.com/wpfdatabinding.zip Example 04   In this example we demonstrate  the use of default properties and also binding to an instant of an object which is part of a collection bound to its container. this is actually not as complicated as it sounds. First of all, lets take a look at our Employee class notice we have overridden the ToString method, which will return employees First name , last name and employee number in parentheses, public override string ToString()        {            return String.Format("{0} {1} ({2})", FirstName, LastName, EmployeeNumber);        }   in our XAML we have set the itemsource of the list box to just  “Binding” and the Grid that contains it, has its DataContext set to a collection of our Employee objects. DataContext="{StaticResource myEmployeeList}"> ….. <ListBox Name="employeeListBox"  ItemsSource="{Binding }" Grid.Row="0" /> the ToString in the method for each instance will get executed and the following is a result of it. if we did not have a ToString the list box would look  like this: now lets take a look at the grid that will display the details when someone clicks on an Item, the Grid has the following DataContext DataContext="{Binding ElementName=employeeListBox,            Path=SelectedItem}"> Which means its bound to a specific instance of the Employee object. and within the gird we have textboxes that are bound to different Properties of our class. <TextBox Grid.Row="0" Grid.Column="1" Text="{Binding Path=FirstName}" /> <TextBox Grid.Row="1" Grid.Column="1" Text="{Binding Path=LastName}" /> <TextBox Grid.Row="2" Grid.Column="1" Text="{Binding Path=Title}" /> <TextBox Grid.Row="3" Grid.Column="1" Text="{Binding Path=Department}" />   Example 05   This project demonstrates use of the ObservableCollection and INotifyPropertyChanged interface. Lets take a look at Employee.cs first, notice it implements the INotifyPropertyChanged interface now scroll down and notice for each setter there is a call to the OnPropertyChanged method, which basically will will fire up the event notifying to the value of that specific property has been changed. Next EmployeeList.cs notice it is an ObservableCollection . Go ahead and set the start up project to example 05 and then run. Click on Add a new employee and the new employee should appear in the list box.   Example 06   This is a great example of IValueConverter its actuall a two for one deal, like most of my presentation demos I found this by “Binging” ( formerly known as g---ing) unfortunately now I can’t find the original author to give him  the credit he/she deserves. Before we look at the code lets run the app and look at the finished product, put in 0 in Celsius  and you should see Fahrenheit textbox displaying to 32 degrees, I know this is calculating correctly from my elementary school science class , also note the color changed to blue, now put in 100 in Celsius which should give us 212 Fahrenheit but now the color is red indicating it is hot, and finally put in 75 Fahrenheit and you should see 23.88 for Celsius and the color now should be black. Basically IValueConverter allows us different types to be bound, I’m sure you have had problems in the past trying to bind to Date values . First look at FahrenheitToCelciusConverter.cs first notice it implements IValueConverter. IValueConverter has two methods Convert and ConvertBack. In each method we have the code for converting Fahrenheit to Celsius and vice Versa. In our XAML, after we set a reference in our Windows.Resources section. and for txtCelsius we set the path to TxtFahrenheit and the converter to an instance our FahrenheitToCelciusConverter converter. no need to repeat this for TxtFahrenheit since we have a convert and ConvertBack. Text="{Binding  UpdateSourceTrigger=PropertyChanged,            Path=Text,ElementName=txtFahrenheit,            Converter={StaticResource myTemperatureConverter}}" As mentioned earlier this is a twofer Demo, in the second demo, we basically are converting a double datatype to a brush. Lets take a look at TemperatureToColorConverter, notice we in our Covert Method, if the value is less than our cold temperature threshold we return a blue brush and if it is higher than our hot temperature threshold we return a redbrush. since we don’t have to convert a brush to double value in our example the convert back is not being implemented. Take time and go through these three examples and I hope you have a better understanding   of databinding, ObservableCollection  and IValueConverter . Next blog posting we will talk about ValidationRule, DataTemplates and DataTemplate triggers.

    Read the article

  • Google Analytics - Unable to get GA Tracking

    - by Pure.Krome
    We've been using GA for a few years with no probs. About 2-3 weeks ago we tried to clean up some of our tracking and on one of our profiles, it's not working anymore (since oct 10.) First, some context then some GA Debugging code. 1. Context. We have the following setup: different root domains AND different sub-domains on one of the root domains. www.website.com www.website.com.au www.anotherWebsite.com foo.website.com baa.website.com So what we're doing is the following: each root domain and each sub-domain get their own tracking code. This way we can allow separate people (from outside our company) to access only their own data. Eg. a manager for foo.website.com can only see data related to that domain .. and see data on the other domains. Have a last account which is the SUM of all the domains. this is for us. so we can see total numbers. So to do this, we have two trackers that fire off, on the page. the individual accounts all work fine - they seem to be tracking data ok. the 'global' account is not working and this gives us the = Tracking Not Installed error. This has been going on since oct 10. So the wait 24/48/72 hours thing is waaaaay over. 2. GA Debug code. Installing GA Debug chrome extension gives the following output. I've tried to hide anything that could be considered secret. UA-XXXXX34-1 == Global account (which isn't working any more). UA-XXXXX34-11 == Specific account for www.website.com _gaq.push processing "_setAccount" for args: "[UA-XXXXX34-1]": ga_debug.js:18 _gaq.push processing "_setDomainName" for args: "[website.com]": ga_debug.js:18 _gaq.push processing "_setAllowLinker" for args: "[true]": ga_debug.js:18 _gaq.push processing "_trackPageview" for args: "[]": ga_debug.js:18 Track Pageview ga_debug.js:18 Tracking beacon sent! utmwv=--snipped-- Account ID : UA-XXXX234-1 Page Title : Some page title Host Name : www.website.com Page : / Referring URL : - Hit ID : 1923583969 Visitor ID : 785310647 Session Count : 51 Session Time - First : Thu Aug 23 2012 15:20:17 GMT 1000 (AUS Eastern Standard Time) Session Time - Last : Mon Oct 29 2012 11:41:46 GMT 1100 (AUS Eastern Summer Time) Session Time - Current : Mon Oct 29 2012 12:19:23 GMT 1100 (AUS Eastern Summer Time) Campaign Time : Thu Aug 23 2012 15:20:17 GMT 1000 (AUS Eastern Standard Time) Campaign Session : 1 Campaign Count : 1 Campaign Source : (direct) Campaign Medium : (none); Campaign Name : (direct) Language : en-gb Encoding : UTF-8 Flash Version : 11.4 r31 Java Enabled : true Screen Resolution : 1050x1680 Browser Size : 1033x861 Color Depth : 32-bit Ga.js Version : 5.3.7d Cachebuster : 1846514973 ga_debug.js:18 _gaq.push processing "_setAccount" for args: "[UA-XXXX234-11]": ga_debug.js:18 _gaq.push processing "_setDomainName" for args: "[website.com]": ga_debug.js:18 _gaq.push processing "_setAllowLinker" for args: "[true]": ga_debug.js:18 _gaq.push processing "_trackPageview" for args: "[]": ga_debug.js:18 Track Pageview ga_debug.js:18 Tracking beacon sent! utmwv=--snipped-- Account ID : UA-XXXX234-11 Page Title : SomePageTitle Host Name : www.website.com Page : / Referring URL : - Hit ID : 1923583969 Visitor ID : 785310647 Session Count : 51 Session Time - First : Thu Aug 23 2012 15:20:17 GMT 1000 (AUS Eastern Standard Time) Session Time - Last : Mon Oct 29 2012 11:41:46 GMT 1100 (AUS Eastern Summer Time) Session Time - Current : Mon Oct 29 2012 12:19:23 GMT 1100 (AUS Eastern Summer Time) Campaign Time : Thu Aug 23 2012 15:20:17 GMT 1000 (AUS Eastern Standard Time) Campaign Session : 1 Campaign Count : 1 Campaign Source : (direct) Campaign Medium : (none); Campaign Name : (direct) Language : en-gb Encoding : UTF-8 Flash Version : 11.4 r31 Java Enabled : true Screen Resolution : 1050x1680 Browser Size : 1033x861 Color Depth : 32-bit Ga.js Version : 5.3.7d Cachebuster : 1580443754 and this is the js code he have. BTW, it is inside a <head></head> <script type="text/javascript"> var _gaq = _gaq || []; _gaq.push( ['_setAccount', 'UA-XXXX234-1'], ['_setDomainName', 'website.com'], ['_setAllowLinker', true], ['_trackPageview'] ,['b._setAccount','UA-XXXX234-11'], ['b._setDomainName','website.com'], ['b._setAllowLinker',true], ['b._trackPageview'] ); (function () { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s); })(); </script> Finally, I've triple checked that the UA is the correct text. and yes, the global account is -1 and the specific domain is -11. Anyone have any suggestions to help?

    Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >