Search Results

Search found 5318 results on 213 pages for 'managed'.

Page 80/213 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

• What program is making this sound and how can I make it stop

  - by DrFredEdison

  Some program is intermittently making this weird "chook ... chick" sound, no more than every 5 minutes, but sometimes hours or days between making it. There seems to be no pattern as to when it happens, but the sound is definitely coming from the speakers, and is always the same, so I'm pretty confident some piece of software I'm running is playing the sound. Today, I managed to record it, and I've posted it here: http://tristanhavelick.com/chook-chick.mp3 Short of closing my programs one by one, and seeing if the sound continues, are there any tricks for tracking down a problem like this? Is there any software that can trace what sounds come from what programs (something like tcpview with waveforms)? I am running windows xp.

  Read the article

• Getting Correct Edition of Office 2007 from Serial Key

  - by Lloyd Sparkes

  I have been asked by a Client to refresh one of their Machines. To do this i managed to get Windows XP Setup to run in Repair mode, and while in setup i ran a serial key grabber, which grabbed the key for Office 2007 The only thing is that the key grabber didnt tell me what edition of Office 2007 was installed. I have aqquired a number of ISO's for the different editions (Home & Student, Standard, Professional, Ultimate) but the key doesnt work in any of them. Is there a way to get the edition from the Serial Key, or is there a generic ISO that will install any edition depending on the Serial Key?

  Read the article

• MAC address stealing?

  - by Arnis L.

  Recently my i-connection started to get laggy. Sometimes it disappears completely. ISP told me that someone steals my internet. Someone has managed to sniff my MAC address, kick me out and surf web in my place. So... I'm curious - how it's possible to steal MAC address and what makes that mystical thief to be more privileged that when he uses i-net I lose mine? Or my ISP just lies to me? P.s. It's not wifi.

  Read the article

• Windows 7 Professional N needs to be just Windows 7 Professional.

  - by Jess

  I have a laptop at work that originally had Windows 7 Home Premium on it. We have a tech that comes in a few times a week to do some of our support work, and we asked him to upgrade the laptop to Windows 7 Professional. Before he left he told us the upgrade didn't work and that we'd have to order a disk. Upon checking the computer it seemed he had upgraded to Windows Professional 7 N. It had not previously been Home Premium N, so I'm not exactly sure how he managed to upgrade it to an N edition. I do not understand why he didn't run the Any Time Upgrade, but that is now irrelevant. How can I change Professional N to regular Professional? I would like to avoid having to restore it back to Home if possible.

  Read the article

• I can't launch any Win8 apps after upgrading to Windows 8.1

  - by locka

  I just upgraded to 8.1 and now none of the Metro apps start. The issue is that if I start any metro app, including the Store and PC Settings they immediately fail. The classic desktop is fine, as are standard programs, it's just the metro apps. If I look in the system event log I see errors like this: *Activation of application winstore_cw5n1h2txyewy!Windows.Store failed with error: This application does not support the contract specified or is not installed. See the Microsoft-Windows-TWinUI/Operational log for additional information.* In addition the tiles in metro have a small cross icon on them: I suspect that my Live ID (which I somehow managed to skip during update) is not set properly and consequently none of the online stuff works. But how do I fix this? I can't start PC settings, I can't start store. I see no way in the classic desktop of setting these things. I don't want to have to reinstall for this. Is there a simple fix?

  Read the article

• Access Bind9 DNS in Virtualbox on Host

  - by Philipp Melab

  I've set up a Ubuntu 10.04 Virtual Box with a Bind9 DNS server. The Box has a NAT Network connection for internet access and a host-only adapter for static ip connections from the host (OSX Lion). Thats the only way i managed to get internet and static ip inside the box, guess there is a better one ... The DNS works fine from inside the virtualbox, but not from the host. The http and ftp on the guest system is accessible via both addresses, so connection between host and guest are fine i guess. I tried to add both IP's as name servers. I'm completely new to Bind9 and DNS configuration. Anybody has a hint for me whats wrong? Or how i have to configure the DNS server?

  Read the article

• Sony Vaio dead keyboard

  - by Filip Górny

  I have strange problem with my almost new laptop. Aftear I leave it turned on for some hours and back to use it, it was printing something like ^[[2~ on the screen and I cannot stop it. After rebooting it did not show any activity. After few hours I managed to turn it on by hiting random keys at keyboard. I starts that way but I have to use external keyboard to type anything. When I randomly stroke the keys when is turned on, it sometimes print that unrecognised characters. It works the same way at linux and windows (ubuntu, windows 7). What can be the reason it started to work so strange and is there anyway to fix it without sending it to warranty and waiting few weeks? :/ I dont remember to make it wet, but they may be something like cigaretes ashes in it, I could not remember...

  Read the article

• Is there a way to create a consistent snapshot/SnapMirror across multiple volumes?

  - by Tomer Gabel

  We use a NetApp FAS 6-series filer with an application that spans multiple volumes. For backup purposes I would like to create a consistent snapshot that spans these volumes at the same point in time (or at least with an extremely low delta); additionally, we'd like to to use SnapMirror to replace the production environment to test volumes. The problem is in creating a consistent snapshot/SnapMirror, since these commands are not transactional and do not take multiple parameters. I tried scripting consecutive "snap create" or "snapmirror resync" commands via SSH, but there's always a 0.5-2 second difference between each snapshot. It's currently "good enough", but I'm seriously concerned about the consistency impact with increased load (we're currently in pre-production). Has anyone managed to create a consistent snapshot that spans several volumes? How did you pull it off?

  Read the article

• Can't connect to domain computers until reboot

  - by thealliedhacker

  I have a domain with about 300 Windows 7 and XP machines, with the domain controllers running Server 2003. Sometimes, I lose the ability to communicate/authenticate with some of the machines until I reboot my computer. This also happens from other computers and regardless of user account and operating system. In other words, say I'm on ComputerA, and I can't connect to ComputerX. I can go to ComputerB and connect to ComputerX, but ComputerB may not be able to connect to ComputerY. If you reboot ComputerA, then it will be able to connect to ComputerX again. Here are some messages from various utilities: sc: [SC] OpenSCManager FAILED 1722: The RPC server is unavailable. mmc (compmgmt.msc): Computer (computer name) cannot be managed. The network path was not found. explorer (\\computer): Windows cannot access \\(computer name). ping: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss) / Average = 1ms

  Read the article

• Macbook optical drive blocked

  - by milse

  The optical drive on my Macbook seems to have some sort of blockage. When I try to insert a disk the disk seems to be hitting something inside the drive on the right side (the side nearer the monitor). Thus disks do not fit into the drive. This problem occurred a few weeks ago, but then miraculously fixed itself. It felt like I had managed to maneuver the disk over the blockage. Now the blockage is back and I can't get any disks into the drive again. Anyone ever encountered this problem before? I probably need to open up my Macbook, huh.

  Read the article

• Apache Serving 403 Forbidden after OS X Snow Leopard Upgrade to Version 10.6.6

  - by Ian Oxley

  I've just upgraded my MacBook Pro to OS X Snow Leopard version 10.6.6 and now Apache is misbehaving: requests to http://localhost/ generate a 403 Forbidden response -- FIXED requests to any of my virtual hosts seem to generate a 200 Ok response, but contain zero bytes Some further info that might be useful: I'm using the Apache that comes bundled with OS X. I'm using PHP from http://www.entropy.ch/software/macosx/php/ (which is in /usr/local/bin) I've had look at the Apache error log and the only error seems to be the following: [notice] child pid 744 exit signal Segmentation fault (11) I'm completely stumped by this. Any help would be much appreciated. UPDATE Ok, I've managed to resolve the 403 Forbidden error thanks to http://techtrouts.com/mac-os-x-105-web-sharing-forbidden-403-on-httplocalhostusername/ I'm still having the second problem though for any request e.g. this now happens when I request http://localhost

  Read the article

• Give root password for maintenance

  - by Jevgeni Smirnov

  After entering shutdown now in terminal I get everything running normally and then: All processes ended withing 2 seconds...done INIT: Going single user INIT: Sending processes the TERM signal INIT: Sending processes the KILL signal Give root password for maintenance(or.... I press Ctrl+D, and it shows me login screen Debian. Shutdown through GUI works properly. UPDATE 1 It seems some process hangs. Moreover I'v managed to poweroff server through several retries. Recently i'v installed only ntp and ntpdate. Nothing more. I suppose it might be it conflicting with iptables.

  Read the article

• Internet Dropping?!

  - by stead1984

  I have a virtual DC running DNS and Routing and Remote Access, that routes ALL workstations Internet traffic out to the Internet, this works fine but noticed that the Internet drops occasionally. I've checked with our service provider (Managed Communications) and they are adamant that it's not their fault. The Internet drops seem to affect everyone. We also have a server configured to use the same Internet service on a different network over a site-to-site VPN connection which also suffers from packet drops. I've spoken to Cisco and have done many tests with Cisco and they believe the problem is down to the ISP. I'm wondering if it's a DNS issue, as the Internet service uses OpenDNS. Any ideas?

  Read the article

• Which hosts have low latency across United States and Europe?

  - by Joost van Doorn

  I'm looking for some information on web hosts that have low latency (<100ms) to both the United States and Europe. The host can be in either the United States or Europe. Latency is most important to the United States, United Kingdom, the Netherlands, Sweden and Norway. Should be able to provide managed hosting. Hosting at multiple locations is not what I'm looking for. Answers should contain at least some latency information from multiple locations, preferably from Los Angeles, New York, London, Amsterdam and Oslo. Also some information on your experience with this host is preferred, do not rant, do provide details of your package (with or without SLA, dedicated or VPS etc.). From my own little research I found that probably New York based hosts can offer low latency to all these locations, but I do not have much statistics to back that up other than my own ping is about 85ms to New York from the Netherlands.

  Read the article

• Puppet: how to use data from a MySQL table in Puppet 3.0 templates?

  - by Luke404

  I have some data whose source-of-truth is in a MySQL database, size is expected to max out at the some-thousands-rows range (in a worst-case scenario) and I'd like to use puppet to configure files on some servers with that data (mostly iterating through those rows in a template). I'm currently using Puppet 3.0.x, and I cannot change the fact that MySQL will be the authoritative source for that data. Please note, data comes from external sources and not from puppet or from the managed nodes. What possible approaches are there? Which one would you recommend? Would External Node Classifiers be useful here? My "last resort" would be regularly dumping the table to a YAML file and reading that through Hiera to a Puppet template, or to directly dump the table in one or more pre-formatted text file(s) ready to be copied to the nodes. There is an unanswered question on SF about system users but the fundamental issue is probably similar to mine - he's trying to get data out of MySQL.

  Read the article

• Remotely connecting to a Hyper-V hosted VM's console.

  - by billpg

  Hi everyone. I've just managed to successfully move an aging beige box into a Hyper-V virtual machine. We used to use the beige box by walking over and sitting at the computer itself, but we can't do that so easily when its inside the Hyper-V system. Is there a way please to access the VM's console from a workstation running XP Pro? Please note that its an obscure OS running inside the VM, so installing a VNC or similar service inside the VM is not an option. Many thanks.

  Read the article

• How to host a scalable social networking app

  - by christopher-mccann

  I am in the middle of developing a social networking application for a very select user niche which could scale to a few million users. Right now I have always hosted applications on RackSpace Cloud and I have no issues with them at all - always been a really good service and never had any downtime. My question is though does anyone think that cloud computing is not the way to host scalable web apps? Or can anyone with experience of this recommend a better solution. I have always shunned trying to run big servers from my own facilities as I think it seems silly to go to the expense of bringing in big alternative power supplies and all the other necessary precautions when other companies already do this. I looked at managed hosting services but this proved to be a bit too expensive for us at the start and the scalability of it wasnt good enough - it would take a day or two to get a new server provisioned. Therefore I ended up on a cloud platform. If anyone has any recommendations or advice it would be greatly appreciated.

  Read the article

• LAN access via USB from Ipod Touch?

  - by Alec

  I need to browse the local web server from my Ipod Touch to test apps we're developing. I'm not allowed to install a separate wireless access point which would be the easiest solution. Can I use the USB cable for this? Also, the local PC is a Dell Mini 9 running Ubuntu. Has anyone managed to use the wireless port to create an ad hoc connection to an Ipod Touch so the Ipod can browse the Ubuntu web server? This would be an alternate option for me. Thank you!

  Read the article

• Amazon EC2, fastest way to get a node into an existing cluster

  - by imaginative

  I'm new to Amazon AWS. A lot of the time I hear about people folks spawning instances and almost instantly putting them behind a load balancer and into an existing cluster. In the traditional world of managed machines, this would include provisioning hardware, installing an OS, configuring the network on the machine and once the network is available, use a tool of your choice such as CFengine, Puppet or Chef to bootstrap the machine based on its class. It seems like there are "shortcuts" that are able to get a server of a particular class up and running in Amazon EC2. If I have a particular stack running on my server, such as erlang, tomcat6 etc.. what's the fastest way to get these up and running and hooked into Amazon's load balancer? From network, to software stack to kernel tuning? Is it a combination of creating an AMI then running a tool like Puppet against the new instance? Any idea

  Read the article

• Swapping 3Ware Raid Card - Best Procedure

  - by Brian Lee Jackson

  We have a server running an old firmware version and driver (just took this position) on the 3Ware 9650SE Raid Controller... We have been having issues with the server and seemed to have narrowed it down to the Raid Card... I will be replacing the Raid card with the same model of 3Ware 9650SE, however, the card ordered most likely will have newer firmware on it. I managed to backup all the data to a very large drive. My plan is to update the firmware/driver on the current setup (which is still booting) and verify that everything works.. Then throw in the new Raid Card, check the firmware version (not letting it post). And update to newest firmware if needed via Java management utility on the card? Is this the best route? Thanks!

  Read the article

• Pxe boot ubuntu server - corrupt packages

  - by Stu2000

  I have set up a cobbler pxe boot server and managed to get centos5.8 to fully automatically install. Unfortunately with Ubuntu 12.04-server-i386, it stops mid-way through with a message stating that packages are corrupt. I tried following this tip to unzip the Packages.gz file which results in an empty Packages file with nothing in it. Other people suggested doing a touch command which essentially does the exact same thing, an empty Packages file. That results in me getting a different message that states: Couldn't retrieve dists/precise/restricted/binary-i386/Packages. This may be due to a network..... Does anyone know how to work around this issue? Hitting continue before having made the tip/workaround resulted in ubuntu installing fine, but I need to be able to provide no manual input. Any advice appreciated, Stu

  Read the article

• Transfer nearly an entire file system to a fresh install as smoothly as possible

  - by Xander

  I've got a friend who needs his computer working in just a few hours. His files are safe, however, he managed to corrupt his main install of Windows 7. My plan is to go in with a Linux disk, copy his C:\ do a backup drive I've got and then reinstall. Restoring many of his files will be pretty simple (such as documents and such), however, things such as applications won't transfer as easily. Is there any easy way to transfer applications such as MS Office (which he needs in the morning) or other commercial software packages without having to go through the hassle of locating the keys and reinstalling them completely? I don't think just moving them over will work just because of the fact that I'm sure much of that is stored in the registry (validation stuff and such). Anyways, quick responses would be super nice! Also, additional help would be great!

  Read the article

• SVN: Error validating server certificate for svn hook linux

  - by Dr Casper Black

  Hi, I managed to setup a SVN (over SSL) server and TortoiseSVN client on Win. I made a Post-Commit Hook for test project. The Post-Commit will update the web dir so the App in PHP can be executed with the newest version. It all works when done over shell. The only problem is, when i commit the changes over the client in Win the change is commited but HOOK throws error post-commit hook failed (exit code 1) with output: Error validating server certificate for 'https://SERVER_IP:443': - The certificate is not issued by a trusted authority. Use the fingerprint to validate the certificate manually! - The certificate hostname does not match. Certificate information: - Hostname: DEVSRVR - Valid: from Fri, 28 Jan 2011 09:22:45 GMT until Sat, 28 Jan 2012 09:22:45 GMT - Issuer: PHP, SS, SS, SRB - Fingerprint: 5f:d0:50:d6:dd:a6:d4:64:a5:ac:3a:4b:7c:7d:33:e3:75:dd:23:9f (R)eject, accept (t)emporarily or accept (p)ermanently? svn: OPTIONS of 'https://SERVER_IP/svn/myproject/trunk': Server certificate verification failed: certificate issued for a different hostname, issuer is not trusted (https://SERVER_IP)

  Read the article

• strange behaviour - dhclient needs to be run twice in order to connect to wireless

  - by splicer

  I am trying to connect my to my wlan without the use of NetworkManager. I run the following commands after boot: iwconfig wlan0 enc <WEP passwd> mode managed essid <name> channel 6 ifconfig wlan0 up dhclient wlan0 At this point, dhclient stalls for ages (perhaps 2 minutes), then it returns with PING 192.168.1.254 (192.168.1.254) from 192.168.1.65 wlan0: 56(84) bytes of data. --- 192.168.1.254 ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 3000ms pipe 3 .. The strange thing is that when I run pkill dhclient; dhclient wlan0 right after this, it connects in about <3 seconds. Any idea what could be the cause of this problem? Edit: oh, and I did try using the -timeout flag on dhclient but that didn't seem to make any difference (it still stalled for ages).

  Read the article

• Does an unmanaged 4/8-port GBit Ethernet switch with a GBIC port exist?

  - by Aaron Digulla

  I'm looking for a simple unmanaged switch with 4-8 GBit Ethernet ports and a fiber port (either as a GBIC slot or pre-installed with a 1000BASE-SX port). Does something like that exist? [EDIT] I want to connect to places in my home without drilling large holes though the floors. Therefore, I'm looking for a cheap way to connect two GBit switches via fiber. I tried with a media converter (GBit <- multimode fiber) but that costs about 50% throughput. So I was hoping that there is a cheap, small GBit switch which has a GBIC slot). All I found so far are very expensive managed switches with 12 or 24 ports for industry use.

  Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >