Search Results

Search found 3171 results on 127 pages for 'pixel colors'.

Page 80/127 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

  • Kinect will recognise your finger movement

    - by Boonei
    Sources inside Microsoft suggest they MS guys are tying to improve motion controller. This could be a huge boost to gaming. There are quite a few things that we can do with our fingers when playing games like driving, shooting,sports etc. If fingers are captured then  XBox will give more realistic version of our avatar. Eurogamer has also suggested the same according to their sources. It would be only(mostly) a software update and would not require a new camera, because the USB controller interface currently in place in Kinect can take in data up-to 35MBps. The current utilization is only around roughly 1/2 of it. So there is currently a facility to send more data. Little more tech data, Kinect does transmit 320×240-pixel in 30 fps, if the device could capture and transfer at 640×480 pixels, then better resolution can detect more movements compared to current level of detection. Lets wait and watch ! This article titled,Kinect will recognise your finger movement, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • Keeping game model and graphics/animation separate but in sync

    - by AJM
    Suppose I'm building a chess game where I want to have animations. Pieces glide to their new squares when moved. Pieces perform attack animations when capturing other pieces. I'm not sure how to effectively separate the data and logic needed for these animations and the actual game model (in the MVC sense). The pieces themselves should ideally not have to worry about their pixel coordinates or current animation frame. At the same time, many changes to the model are effectively driven by animations. A moved piece changes its position after (before?) its sprite is done gliding. A piece is removed from the board after the capturing piece is finished its attack animation. How would you suggest I manage the game model, the graphics and animations, and their relationships? For example, where would the animations "live"? How would animations be created and managed in response to player moves? How would animations drive updates to the game model, or how would the game model drive animations?

    Read the article

  • GLSL, is it possible to offsetting vertices based on height map colour?

    - by Rob
    I am attempting to generate some terrain based upon a heightmap. I have generated a 32 x 32 grid and a corresponding height map - In my vertex shader I am trying to offset the position of the Y axis based upon the colour of the heightmap, white vertices being higher than black ones. //Vertex Shader Code #version 330 uniform mat4 modelMatrix; uniform mat4 viewMatrix; uniform mat4 projectionMatrix; uniform sampler2D heightmap; layout (location=0) in vec4 vertexPos; layout (location=1) in vec4 vertexColour; layout (location=3) in vec2 vertexTextureCoord; layout (location=4) in float offset; out vec4 fragCol; out vec4 fragPos; out vec2 fragTex; void main() { // Retreive the current pixel's colour vec4 hmColour = texture(heightmap,vertexTextureCoord); // Offset the y position by the value of current texel's colour value ? vec4 offset = vec4(vertexPos.x , vertexPos.y + hmColour.r, vertexPos.z , 1.0); // Final Position gl_Position = projectionMatrix * viewMatrix * modelMatrix * offset; // Data sent to Fragment Shader. fragCol = vertexColour; fragPos = vertexPos; fragTex = vertexTextureCoord; } However the code I have produced only creates a grid with none of the y vertices higher than any others.

    Read the article

  • Implementing Light Volume Front Faces

    - by cubrman
    I recently read an article about light indexed deferred rendering from here: http://code.google.com/p/lightindexed-deferredrender/ It explains its ideas in a clear way, but there was one point that I failed to understand. It in fact is one of the most interesting ones, as it explains how to implement transparency with this approach: Typically when rendering light volumes in deferred rendering, only surfaces that intersect the light volume are marked and lit. This is generally accomplished by a “shadow volume like” technique of rendering back faces – incrementing stencil where depth is greater than – then rendering front faces and only accepting when depth is less than and stencil is not zero. By only rendering front faces where depth is less than, all future lookups by fragments in the forward rendering pass will get all possible lights that could hit the fragment. Can anyone explain how exactly you need to render only front faces? Another question is why do you need the front faces at all? Why can't we simply render all the lights and store the ones that overlap at this pixel in a texture? Does this approach serves as a cut-off plane to discard lights blocked by opaque geometry?

    Read the article

  • CodePlex Daily Summary for Thursday, July 18, 2013

    CodePlex Daily Summary for Thursday, July 18, 2013Popular ReleasesCircuit Diagram: Circuit Diagram 2.0 Beta 2: New in this release: Show grid in editor Cut/copy/paste support Bug fixesBetter Network: Better Network v1.0.1: v1.0.1 - Patch Changelog - Fixed app crashed when trying to delete - Hopefully fix other crashes as well :DCommunity TFS Build Extensions: July 2013: The July 2013 release contains VS2010 Activities(target .NET 4.0) VS2012 Activities (target .NET 4.5) VS2013 Activities (target .NET 4.5.1) Community TFS Build Manager VS2012 The Community TFS Build Manager can also be found in the Visual Studio Gallery here where updates will first become available. A version supporting VS2010 is also available in the Gallery here.Open Url Rewriter for DotNetNuke: Open Url Rewriter Core 0.4.2 (Beta): buf fix for removing home page separate version for DNN 7.1 (in advanced mode with custom url)#Zyan Communication Framework: Zyan 2.5: Zyan 2.5 NuGet package Project descriptionZyan is an easy to use distributed application framework for .NET, Mono and Android. With Zyan you can publish any .NET class for remote access over network. [en] What's new in Zyan 2.5: Android platform support via Mono for Android (#1828) Tested with Mono for Android v4.7.9, should work on stable v4.6.x The following restrictions apply to Android version of the library: Only duplex TCP channel is supported MEF integration is not available Re...Install Verify Tool: Install Verify Tool V 1.0: Win Service Web Service Win Service Client Web Service ClientOrchard Project: Orchard 1.7 RC: Planning releasedTerminals: Version 3.1 - Release: Changes since version 3.0:15992 Unified usage of icons in user interface Added context menu in Organize favorites grid Fixed:34219 34210 34223 33981 34209 Install notes:No changes in database (use database from release 3.0) No upgrade of configuration, passwords, credentials or favorites See also upgrade notes for release 3.0WatchersNET.SiteMap: WatchersNE​T.SiteMap 01.03.08: changes Localized Tab Name is now usedGoAgent GUI: GoAgent GUI 1.1.0 ???: ???????,??????????????,?????????????? ???????? ????: 1.1.0? ??? ?????????? ????????? ??:??cn/hk????,?????????????????????。Hosts??????google_hk。Media Companion: Media Companion MC3.573b: XBMC Link - Let MC update your XBMC Library Fixes in place, Enjoy the XBMC Link function Well, Phil's been busy in the background, and come up with a Great new feature for Media Companion. Currently only implemented for movies. Once we're happy that's working with no issues, we'll extend the functionality to include TV shows. All the help for this is build into the application. Go to General Preferences - XBMC Link for details. Help us make it better* Currently only tested on local and ...Wsus Package Publisher: Release v1.2.1307.15: Fix a bug where WPP crash if 'ShowPendingUpdates' is start with wrong credentials. Fix a bug where WPP crash if ArrivalDateAfter and ArrivalDateBefore is equal in the ComputerView. Add a filter in the ComputerView. (Thanks to NorbertFe for this feature request) Add an option, when right-clicking on a computer, you can ask for display the current logon user of the remote computer. Add an option in settings to choose if WPP ping remote computers using IPv4, IPv6 or IPv6 and, if fail, IP...Lab Of Things: vBeta1: Initial release of LoTVidCoder: 1.4.23: New in 1.4.23 Added French translation. Fixed non-x264 video encoders not sticking in video tab. New in 1.4 Updated HandBrake core to 0.9.9 Blu-ray subtitle (PGS) support Additional framerates: 30, 50, 59.94, 60 Additional sample rates: 8, 11.025, 12 and 16 kHz Additional higher bitrates for audio Same as Source Constant Framerate 24-bit FLAC encoding Added Windows Phone 8 and Apple TV 3 presets Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will ...TBox - tool to make developer's life easier.: TBox 1.021: 1)Add console unit tests runner, to run unit tests in parallel from console. Also this new sub tool can save valid xml nunit report. It can help you in continuous integration. 2)Fix build scripts.LifeInSharepoint Modern UI Update: Version 2: Some minor improvements, including Audience Targeting support for quick launch links. Also removing all NextDocs references.Virtual Photonics: VTS MATLAB Package 1.0.13 Beta: This is the beta release of the MATLAB package with examples of using the VTS libraries within MATLAB. Changes for this release: Added two new examples to vts_solver_demo.m that: 1) generates and plots R(lambda) at a given rho, and chromophore concentrations assuming a power law for scattering, and 2) solves inverse problem for R(lambda) at given rho. This example solves for concentrations of HbO2, Hb and H20 given simulated measurements created using Nurbs scaled Monte Carlo and inverted u...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.96: Fix for issue #19957: EXE should output the name of the file(s) being minified. Discussion #449181: throw a Sev-2 warning when trailing commas are detected on an Array literal. Perfectly legal to do so, but the behavior ends up working differently on different browsers, so throw a cross-browser warning. Add a few more known global names for improved ES6 compatibility update Nuget package to version 2.5 and automatically add the AjaxMin.targets to your project when you update the package...Outlook 2013 Add-In: Categories and Colors: This new version has a major change in the drawing of the list items: - Using owner drawn code to format the appointments using GDI (some flickering may occur, but it looks a little bit better IMHO, with separate sections). - Added category color support (if more than one category, only one color will be shown). Here, the colors Outlook uses are slightly different than the ones available in System.Drawing, so I did a first approach matching. ;-) - Added appointment status support (to show fr...Columbus Remote Desktop: 2.0 Sapphire: Added configuration settings Added update notifications Added ability to disable GPU acceleration Fixed connection bugsNew ProjectsAdvGenReader: This project is to build a user friendly RSS reader. We are aimed to use WPF for this project.Arroguella: A C# roguelike where anything can happen!CodedUITestExtensions: The project delivers a collection of extensions for CodedUITest.Data UYS System: Production system will be developed.Evolved Walker: A GA project where a physically simulated "Walker" is evolved to travel the longest distance it can.FH Intranet Parser: Parses the grades page of the FH Wiener Neustadt intranet page and reports any new grades.Gauss Numeric Integrator: C# implementation of numerical integration by Gaussian Quadrature.googleprep: Google interview preparations.JMA TFS Archive: TFS Test ProjectJMA TFS NEW: Test projectKill CRM Plugin: Removes a plugin from a Dynamics CRM 2011 database.Kimmo: Collection of source code libraries to help my development projects.Kinect Powerpoint Mapper: Use the Kinect sensor to drive your powerpoint presentation. Change the config file if you'd like to use this keystroke mapper with other applications.Koala.JiraTool: Jira????。Lumi: Lumi is a light based platformer engine based on Neat Game Engine for XNA. Features: Dynamic lighting and shadow system, level builder, console and scripting.MCSD Web Developer: MCSD: Web Applications Certification This is the repository for all the documents, presentations, information, projects and material for the certification.MindReader: It is game using some logic to develop thisNightskyMimic: Ai for Magic: The Gathering PlayerNoBlackWallpaper: Auto set and update bing image as wallpaperPersian FoxPro DBF viewer for .NET: Many legacy systems used FoxPro in Iran. This component allows data stored in DBF files to be read by .NET, including the necessary Farsi codepage conversions.PostEdit: Taringa!/Poringa! Post Editorprakark07172013Git01: *bold* _italics_ +underline+ ! Heading 1 !! Heading 2 * Bullet List ** Bullet List 2 # Number List ## Number List 2 [another wiki page] [url:http://www.example.prakark07172013tfs01: *bold* _italics_ +underline+ ! Heading 1 !! Heading 2 * Bullet List ** Bullet List 2 # Number List ## Number List 2 [another wiki page] [url:http://www.example.prakark07172015Hg01: *bold* _italics_ +underline+ ! Heading 1 !! Heading 2 * Bullet List ** Bullet List 2 # Number List ## Number List 2 [another wiki page] [url:http://www.example.Storyboard application: The Storyboard is an application that allows to model the different elements of a story to better structure it.System.Linq.Dynamic: Extends System.Linq.Dynamic to support Execution of Lambda expressions defined in a string against Entity Framework or any provider that supports IQueryable.Test Automation Data Manager: MVC4 application with SQLServer 2008 back end to manage test automation data.testdd07172013tfs01: dThe Monack Framework: MonackFr is an open source framework. By developing new or combining existing modules you will be able to create tailor made web softwareYAPI (Youtube API): You can do anything and play anymore youtube channel, playlist, video with YAPI

    Read the article

  • CodePlex Daily Summary for Wednesday, July 17, 2013

    CodePlex Daily Summary for Wednesday, July 17, 2013Popular Releases#Zyan Communication Framework: Zyan 2.5: Zyan 2.5 NuGet package Project descriptionZyan is an easy to use distributed application framework for .NET, Mono and Android. With Zyan you can publish any .NET class for remote access over network. [en] What's new in Zyan 2.5: Android platform support via Mono for Android (#1828) Tested with Mono for Android v4.7.9, should work on stable v4.6.x The following restrictions apply to Android version of the library: Only duplex TCP channel is supported MEF integration is not available Re...Install Verify Tool: Install Verify Tool V 1.0: Win Service Web Service Win Service Client Web Service ClientOrchard Project: Orchard 1.7 RC: Planning releasedTerminals: Version 3.1 - Release: Changes since version 3.0:15992 Unified usage of icons in user interface Added context menu in Organize favorites grid Fixed:34219 34210 34223 33981 34209 Install notes:No changes in database (use database from release 3.0) No upgrade of configuration, passwords, credentials or favorites See also upgrade notes for release 3.0WatchersNET.SiteMap: WatchersNE​T.SiteMap 01.03.08: changes Localized Tab Name is now usedGoAgent GUI: GoAgent GUI 1.1.0 ???: ???????,??????????????,?????????????? ???????? ????: 1.1.0? ??? ?????????? ????????? ??:??cn/hk????,?????????????????????。Hosts??????google_hk。Media Companion: Media Companion MC3.573b: XBMC Link - Let MC update your XBMC Library Fixes in place, Enjoy the XBMC Link function Well, Phil's been busy in the background, and come up with a Great new feature for Media Companion. Currently only implemented for movies. Once we're happy that's working with no issues, we'll extend the functionality to include TV shows. All the help for this is build into the application. Go to General Preferences - XBMC Link for details. Help us make it better* Currently only tested on local and ...Wsus Package Publisher: Release v1.2.1307.15: Fix a bug where WPP crash if 'ShowPendingUpdates' is start with wrong credentials. Fix a bug where WPP crash if ArrivalDateAfter and ArrivalDateBefore is equal in the ComputerView. Add a filter in the ComputerView. (Thanks to NorbertFe for this feature request) Add an option, when right-clicking on a computer, you can ask for display the current logon user of the remote computer. Add an option in settings to choose if WPP ping remote computers using IPv4, IPv6 or IPv6 and, if fail, IP...Lab Of Things: vBeta1: Initial release of LoTVidCoder: 1.4.23: New in 1.4.23 Added French translation. Fixed non-x264 video encoders not sticking in video tab. New in 1.4 Updated HandBrake core to 0.9.9 Blu-ray subtitle (PGS) support Additional framerates: 30, 50, 59.94, 60 Additional sample rates: 8, 11.025, 12 and 16 kHz Additional higher bitrates for audio Same as Source Constant Framerate 24-bit FLAC encoding Added Windows Phone 8 and Apple TV 3 presets Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will ...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.96: Fix for issue #19957: EXE should output the name of the file(s) being minified. Discussion #449181: throw a Sev-2 warning when trailing commas are detected on an Array literal. Perfectly legal to do so, but the behavior ends up working differently on different browsers, so throw a cross-browser warning. Add a few more known global names for improved ES6 compatibility update Nuget package to version 2.5 and automatically add the AjaxMin.targets to your project when you update the package...Outlook 2013 Add-In: Categories and Colors: This new version has a major change in the drawing of the list items: - Using owner drawn code to format the appointments using GDI (some flickering may occur, but it looks a little bit better IMHO, with separate sections). - Added category color support (if more than one category, only one color will be shown). Here, the colors Outlook uses are slightly different than the ones available in System.Drawing, so I did a first approach matching. ;-) - Added appointment status support (to show fr...TypePipe: 1.15.2.0 (.NET 4.5): This is build 1.15.2.0 of the TypePipe for .NET 4.5. Find the complete release notes for the build here: Release Notes.re-linq: 1.15.2.0 (.NET 4.5): This is build 1.15.2.0 of re-linq for .NET 4.5. Find the complete release notes for the build here: Release Notes To use re-linq with .NET 3.5, use a 1.13.x build.Columbus Remote Desktop: 2.0 Sapphire: Added configuration settings Added update notifications Added ability to disable GPU acceleration Fixed connection bugsCarrotCake, an ASP.Net WebForms CMS: Binaries and PDFs - Zip Archive (v. 4.3 20130713): Product documentation and additional templates for this version is included in the zip archive, or if you want individual files, visit the http://www.carrotware.com website. Templates, in addition to those found in the download, can be downloaded individually from the website as well. If you are coming from earlier versions, make a precautionary backup of your existing website files and database. When installing the update, the database update engine will create the new schema items (if you...Dalmatian Build Script: Dalmatian Build 0.1.3.0: -Minor bug fixes -Added Choose<T> and ChooseYesNo to Console objectPushover.NET: Pushover.NET - Stable Release 10 July 2013: This is the first stable release of Pushover.NET. It includes 14 overloads of the SendNotification method, giving you total flexibility of sending Pushover notifications from your client. Assembly is built to .NET 2.x so it can be called from .NET 2.x, 3.x and 4.x projects. Also available is the Test Harness. This is a small GUI that you can use to test calls to Pushover.NET's main DLL. It's almost fully functional--the sound effects haven't been fully configured so no matter what you pick ...MCEBuddy 2.x: MCEBuddy 2.3.14: 2.3.14 BETA is available through the Early Access Program.Click here https://mcebuddy2x.codeplex.com/discussions/439439 for details and to get access to Early Access Program to download latest releases. Changelog for 2.3.14 (32bit and 64bit) NEW FEATURES: 1. ENHANCEMENTS: 2. Improved eMail notifications 3. Improved metrics details 4. Support for larger history (INI) file (about 45,000 sections, each section can have about 1500 entries) BUG FIXES: 5. Fix for extracting Movie release year from...Azure Depot: Flask: Flask Version 01New ProjectsCalculator AION: This is product for gamers of MMORPG "AION".Close a ChildWindow by its Overlay: The fastest and proven solution to make you ChildWindows closed by its overlay.CodeColorizer: Colorize source code. EngWorx: This project uses a layered software architecture based on: - ASP.NET MVC (with Razor) - JQuery - WCF - EntityFramework eXpandframework: eXpand is the first open source project based on the DevExpress eXpressApp Framework (XAF). The eXpressApp Framework ships with DXperience Universal Green Tights: Wiki clone by WebMatrix 3 & ASP.NET Web Pages 2Had: HadJXR Picturase: JXR Picturase helps your not-supporting browsers to properly digest JPEG XR-encoded pictures so that you can actually see them.Neblus OS: A project hosted by Atsoft to develop a free GUI OS which is user friendly and easy to use. Based on COSMOS project. Website: http://www.atsoftc.weebly.comProduct Code Validator: This project aims to facilitate the validation of product codes such as EANs (European Product Code), ASINs (Amazon Standard Identification Number) and ISBNs.SCORMLMS elearning system: ScormLMS is E-learning system with a SCORM 2004 standard compliance smoketestgit1: smoketestgit1smoketesthg: smoketesthgsmoketesttfs: smoketesttfsSP Admin Toolkit: The SPAdminToolkit is designed to collect information from various parts of your SharePoint farm and then save this data to a number of SharePoint lists.SpaceSync: Cool demo of UDP multicast and XNA in Windows Phone 7. Use two phones connected to the same Wi-fi network. The ships rotate in sync in both phones. tDonkey: Website for scheduling courses at the Techniontest123: acdafasdfasfasdfasfadsdfasdftestpro: sdfsdfUITestingHelpers: The project delivers a collection of C # helpers for automated testing of applications.VSIX Editor: VSIX Editor is a small handy tool to quickly tweak your Visual Studio Extension Packages.????????????: tasktimer???????????????,??????????,??????????,??????,?????。

    Read the article

  • checking for collision detection

    - by bill
    I am trying to create a game where you have a player and you can move right,left, and jump. kind of like mario but its not a side scroller. also i want to use 2d array to make a tile map. my big problem is that i dont understand how to check for collision. i spend about 2 week thinking about this and i came up with 2 solution but they both have problems. let say my map is: 0 = sky 1 = player 2 = ground 00000 10002 22022 Solution 1: move the '1'(player) and update the map less say player wants to move right, then x+=grid[x+1][y] this make the collision easy bc you can just check if if(grid[x][y+1] == 2){ //player is standing on top of ground } problem with this when u hit right key player will move (x*Titlewidth) to right. and as you can see the animation wont look smooth. Solution 2: move player and dont update map player_x += 2 this will make the animation more smoother bc i am just moving 2 pixels. problem1: i cant update map bc if player some times will be middle of int(2d array). but thats ok sinces its not a side scroller so updating the map is not a big deal. problem2: only way to check for collision is to use java intersection method. but then player have to be atleast 1 or 2 pixel in ground in order to check for collision. and as you can see that wont look good too. plz note this is my first collision game in java. so plz try to explain alot otherwise i wont understand it.

    Read the article

  • LWJGL texture bleeding fix won't work

    - by user1990950
    I tried a lot of things to fix texture bleeding, but nothing works. I don't want to add a transparent border around my textures, because I already got too many and it would take too much time and I can't do it with code because I'm loading textures with slick. My textures are seperate textures and they seem to wrap on the other side (texture bleeding). Here are the textures that are "bleeding": The head, body, arm and leg are seperate textures. Here's the code I'm using to draw a texture: public static void drawTextureN(Texture texture, Vector2f position, Vector2f translation, Vector2f origin,Vector2f scale,float rotation, Color color, FlipState flipState) { texture.setTextureFilter(GL11.GL_NEAREST); color.bind(); texture.bind(); GL11.glTexParameteri(GL11.GL_TEXTURE_2D, GL11.GL_TEXTURE_WRAP_S, GL12.GL_CLAMP_TO_EDGE); GL11.glTexParameteri(GL11.GL_TEXTURE_2D, GL11.GL_TEXTURE_WRAP_T, GL12.GL_CLAMP_TO_EDGE); GL11.glTexParameteri(GL11.GL_TEXTURE_2D, GL11.GL_TEXTURE_MAG_FILTER, GL11.GL_NEAREST); GL11.glTexParameteri(GL11.GL_TEXTURE_2D, GL11.GL_TEXTURE_MIN_FILTER, GL11.GL_NEAREST); GL11.glTranslatef((int)position.x, (int)position.y, 0); GL11.glTranslatef(-(int)translation.x, -(int)translation.y, 0); GL11.glRotated(rotation, 0f, 0f, 1f); GL11.glScalef(scale.x, scale.y, 1); GL11.glTranslatef(-(int)origin.x, -(int)origin.y, 0); float pixelCorrection = 0f; GL11.glBegin(GL11.GL_QUADS); GL11.glTexCoord2f(0,0); GL11.glVertex2f(0,0); GL11.glTexCoord2f(1,0); GL11.glVertex2f(texture.getTextureWidth(),0); GL11.glTexCoord2f(1,1); GL11.glVertex2f(texture.getTextureWidth(),texture.getTextureHeight()); GL11.glTexCoord2f(0,1); GL11.glVertex2f(0,texture.getTextureHeight()); GL11.glEnd(); GL11.glLoadIdentity(); } I tried a half pixel correction but it didn't make any sense because GL12.GL_CLAMP_TO_EDGE. I set pixelCorrection to 0, but it still wont work.

    Read the article

  • Self hosted PHP shopping cart with no storefront?

    - by Question
    I am looking for a shopping cart to implement on a simple website instead of the default paypal cart that is used with their add to cart buttons (I don't like the non-styeable new tab/window cart). However, I really like the ability to simply add the buttons to existing pages. I do not have a lot of products and do not want to deal with a storefront and complex templates. The main features I need: Self-hosted Easy to implement with existing website (copy and paste button code, etc.) Ability to have variations on one button with different prices (dropdown with sizes, colors, etc.) Ability to track inventory and disallow out of stock orders Ability to pass cart details to PayPal Website Payments Standard I have seen most of the large storefront options: oscommerce, zencart, cubecart, opencart, prestashop, magento, cs-cart, lemonstand, etc. but these are way more than I need. I don't need the storefront or customer accounts or templated pages, etc. I have seen e-junkie, which is not far off from what I would like, but it is not self-hosted and I would prefer an in-site cart (or dynamic overlay cart) rather than a lightbox or new tab/window cart. I also love the paypal minicart and its implementation, but there is no way to track inventory. So, does anyone have any recommendations that might meet these requests?

    Read the article

  • Blur gets displaced compared to original image

    - by user1294203
    I have implemented a SSAO and I'm using a blur step to smooth it out. The problem is that the blurred texture is slightly displaced compared to the original. I'm blurring using a 4x4 kernel since that was my noise kernel in SSAO. The following is the blurring shader: float result = 0.0; for(int i = 0; i < 4; i++){ for(int j = 0; j < 4; j++){ vec2 offset = vec2(TEXEL_SIZE.x * i, TEXEL_SIZE.y * j); result += texture(aoSampler, TexCoord + offset).r; } } out_AO = vec4(vec3(0.0), result * 0.0625); Where TEXEL_SIZE is one over my window resolution. I was thinking that this is was an error based on how OpenGL counts the Texel center, so I tried displacing the texture coordinate I was using by 0.5 * TEXEL_SIZE, but there was still a slight displacement. The texture input to my blur shader, has wrap parameters: glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP); When I tell the blur shader to just output the the value of the pixel, the result is not displaced, so it must have something to do with how neighboring pixels are sampled. Any thoughts?

    Read the article

  • Flattening PDF transparency

    - by Jan
    I have a PDF, made with Inkscape, that uses transparent colors. This image shall be used in a LaTeX document. While preserving the transparency is nice for editing, it can be a problem for printing. Printing usually involves PDF to PS conversion. Since Postscript does not support transparency, this requires either flatting, i.e. creating a vector graphic that works without transparency or rastering, i.e. rendering a bitmap image. When a PDF document containing such a figure is printed (or converted to PS) using Evince (or Cairo or Ghostscript), the whole page gets rendered as a bitmap, rendering fonts ugly (different from other pages). (Adobe Acrobat handles such PDFs well.) Unfortunately, converting the PDF figures to EPS (before including them with LaTeX) doesn't help much, because both pdftops and pdf2ps (again, Cairo or Ghostscript) rasterize the image, i.e. render a bitmap (saved as EPS). (This is slightly better, because it doesn't affect the whole page, but I'd still prefer a vector graphics.) How can I flatten transparency with Inkscape or other software on Linux?

    Read the article

  • 5 Mac Applications For Web And Graphic Design

    - by Jyoti
    In this article free applications useful and effective for the development and creation of websites with your Mac computer. Without further ado, here are 5 Excellent Mac Application for Web and Graphic Design. Fotoflexer : Fotoflexer claims to be “The world’s most advanced online image editor”. It offers completely free access to numerous features such as photo effects, graphics, shapes, morphing, and the creation of collages. You can also integrate and share your art with social sites like MySpace, Flickr, Facebook, and more. This can be an important app if the site you are creating is going to use applications. Simple CSS : With Simple CSS you can create Cascading Style Sheets from scratch or edit them right from the comfort of your desktop. Update styles on multiple pages all at once and reduce the data transfer usage on your page for faster loads. Blender : Blender is an open source software that allows you to create 3D animation with interactive playback leaves you with the option to optimize the style of your site with a few graphics. You can create animations with shades of colors, glossy features, soft shadows and advanced rendering features. JAlbum : Jalbum is a very useful app that allows you to create stylish photo galleries to publish on the web. All you have to do is simply drag selected folders into a pane where any images contained within the folder will automatically be arranged into a photo gallery. You can add several different themes and templates to enhance the appearance of your gallery, later then gain the HTML code and publish the complete gallery onto the web. Colorate : With Colorate you can create harmonized color palettes along with color schemes. Generate these palettes for images, photographs and more.

    Read the article

  • 2D platformers: why make the physics dependent on the framerate?

    - by Archagon
    "Super Meat Boy" is a difficult platformer that recently came out for PC, requiring exceptional control and pixel-perfect jumping. The physics code in the game is dependent on the framerate, which is locked to 60fps; this means that if your computer can't run the game at full speed, the physics will go insane, causing (among other things) your character to run slower and fall through the ground. Furthermore, if vsync is off, the game runs extremely fast. Could those experienced with 2D game programming help explain why the game was coded this way? Wouldn't a physics loop running at a constant rate be a better solution? (Actually, I think a physics loop is used for parts of the game, since some of the entities continue to move normally regardless of the framerate. Your character, on the other hand, runs exactly [fps/60] as fast.) What bothers me about this implementation is the loss of abstraction between the game engine and the graphics rendering, which depends on system-specific things like the monitor, graphics card, and CPU. If, for whatever reason, your computer can't handle vsync, or can't run the game at exactly 60fps, it'll break spectacularly. Why should the rendering step in any way influence the physics calculations? (Most games nowadays would either slow down the game or skip frames.) On the other hand, I understand that old-school platformers on the NES and SNES depended on a fixed framerate for much of their control and physics. Why is this, and would it be possible to create a patformer in that vein without having the framerate dependency? Is there necessarily a loss of precision if you separate the graphics rendering from the rest of the engine? Thank you, and sorry if the question was confusing.

    Read the article

  • Creating a retro-style palette swapping effect in OpenGL

    - by Zack The Human
    I'm working on a Megaman-like game where I need to change the color of certain pixels at runtime. For reference: in Megaman when you change your selected weapon then main character's palette changes to reflect the selected weapon. Not all of the sprite's colors change, only certain ones do. This kind of effect was common and quite easy to do on the NES since the programmer had access to the palette and the logical mapping between pixels and palette indices. On modern hardware, though, this is a bit more challenging because the concept of palettes is not the same. All of my textures are 32-bit and do not use palettes. There are two ways I know of to achieve the effect I want, but I'm curious if there are better ways to achieve this effect easily. The two options I know of are: Use a shader and write some GLSL to perform the "palette swapping" behavior. If shaders are not available (say, because the graphics card doesn't support them) then it is possible to clone the "original" textures and generate different versions with the color changes pre-applied. Ideally I would like to use a shader since it seems straightforward and requires little additional work opposed to the duplicated-texture method. I worry that duplicating textures just to change a color in them is wasting VRAM -- should I not worry about that?

    Read the article

  • Watch the Geminid Meteors Tonight

    - by Jason Fitzpatrick
    Tonight is the peak of the Geminid Meteor shower, if you don’t mind braving the cold and have a spot relatively free from light pollution to stretch out in you’ll be able to enjoy one of the more brilliant and busy meteor showers of the year. Sky and Telescope magazine reports on the Geminid Meteor shower: If it’s clear late Thursday night, December 13th, 2012, keep a lookout high overhead for the shooting stars of the Geminid meteor shower. The Geminids are usually one of the two best meteor showers of the year, often beating out the Perseids of August. And this year there’s no moonlight to interfere. Under a clear, dark sky, you may see at least one Geminid per minute on average from roughly 10 p.m. Thursday until dawn Friday morning. If you live under the artificial skyglow of light pollution your numbers will be less, but the brightest meteors will still shine through. Hit up the link below to read the full article and learn more about the Geminid Meteor shower. Secure Yourself by Using Two-Step Verification on These 16 Web Services How to Fix a Stuck Pixel on an LCD Monitor How to Factory Reset Your Android Phone or Tablet When It Won’t Boot

    Read the article

  • GetContactList stops reporting collisions on welded bodies

    - by Henrique Jung
    I have some strange problem with my game which uses Box2D as physics engine and I'm out of ideas on what I can do to solve it. My game is a class assignment where I need to build a simple game where the main character moves in a 2D environment while square blocks comes from below him. Each time a collision occurs, that block is attached to the character using a weld joint, when three blocks of the same colors are together, they annihilate themselves(an effect similar to Bejeweled). I'm using a recursive function to iterate through all the attached blocks of a given block to see if there are enough blocks for them to be deleted. I'm using GetContactList function to iterate through the list of contacts to see which blocks are adjacent to each other. The results are quite disappointing, the blocks only get annihilated in few cases. After a lot of debugging, I found the issue, but I still don't know how to solve. My issue is: after some time, GetContactList STOPS returning contacts (return NULL) to blocks that were already attached for some time. I spent some time reading the Box2D manual as well as some tutorials and still didn't find any clue of what is happening. Below there's some simplified version of the code that I wrote. for(int a = 0; a < blocksList.size(); a++) { blocksList[a].BuildConnections(); } And on BuildConnections b2ContactEdge* edge = body->GetContactList(); while(edge != NULL) { if (long_check_to_see_if_there's_a_block_nearby) { // add itself to the list to be anihilated globalList.push_back(this); //if there's, call BuildConnections again on the adjacent block adjacentBody->GetUserData()->BuildConnections; } edge = edge->next; } I know that there's another issue related to circular inclusions, but I fairly sure that this problem isn't causing the problem with the collisions. You can download my entire code from this page if you'd like http://code.google.com/p/fellz/source/list

    Read the article

  • 2D Collision masks for handling slopes

    - by JiminyCricket
    I've been looking at the example at: http://create.msdn.com/en-US/education/catalog/tutorial/collision_2d_perpixel and am trying to figure out how to adjust the sprite once a collision has been detected. As David suggested at XNA 4.0 2D sidescroller variable terrain heightmap for walking/collision, I made a few sensor points (feet, sides, bottom center, etc.) and can easily detect when these points actually collide with non-transparent portions of a second texture (simple slope). I'm having trouble with the algorithm of how I would actually adjust the sprite position based on a collision. Say I detect a collision with the slope at the sprite's right foot. How can I scan the slope texture data to find the Y position to place the sprite's foot so it is no longer inside the slope? The way it is stored as a 1D array in the example is a bit confusing, should I try to store the data as a 2D array instead? For test purposes, I'm thinking of just using the slope texture alpha itself as a primitive and easy collision mask (no grass bits or anything besides a simple non-linear slope). Then, as in the example, I find the coordinates of any collisions between the slope texture and the sprite's sensors and mark these special sensor collisions as having occurred. Finally, in the case of moving up a slope, I would scan for the first transparent pixel above (in the texture's Ys at that X) the right foot collision point and set that as the new height of the sprite. I'm a little unclear also on when I should make these adjustments. Collisions are checked on every game.update() so would I quickly change the position of the sprite before the next update is called? I also noticed several people mention that it's best to separate collision checks horizontally and vertically, why is that exactly? Open to any suggestions if this is an inefficient or inaccurate way of handling this. I wish MSDN had provided an example of something like this, I didn't know it would be so much more complex than NES Mario style pure box platforming!

    Read the article

  • HLSL - Creating Shadows in 2D

    - by richard
    The way that I create shadows is by the following technique: http://www.catalinzima.com/2010/07/my-technique-for-the-shader-based-dynamic-2d-shadows/ But I have questions to HLSL. The way that I currently do it is, I have a black and white image, where Black means 'object', and white means 'nothing'. I then distort the image like in the tutorial. I do this with a pixel shader, but instead of rendering to the screen, I render to a texture, back to my application. I then take this, and create the shadows, and then send it back to the graphics card to undo the distortion, after the shadow has been added - this comes back and I have a stencil of shadow. I can put this ontop of the original image and send them back to the graphics card, which then puts them on the screen. To me this is alot of back and forth. Is there a way i can avoid this? The problem that I am having is that I need to basically go through all positions in the texture 3 times, and use the new new texture every time instead of the orginal one. I tried to read up on Passes, but i don't think that i am heading in the right direction there. Help?

    Read the article

  • Feasability of mobile 2D multiplayer RPG game with interactive bitmap background

    - by user2827214
    I'm looking to develop a 2D multiplayer RPG game for Android, with a bird's eye view similar to that of zelda/pokemon. The game is very simple in all ways since my intent is for thousands of players to occupy the same world which I imagine requires good performance. However, I am unsure about the performance requirements of two properties: the tile map that is used as a background is dynamic (interactive). For example, a player steps in the water, and the water turns black. Every tile in the game does this. the tile map is the same object used for all players, but it is displayed differently on each user's mobile device, even though the players exist in the same world. For example, the water that turned black is displayed as red on all other players' screens. I have knowledge of java, but almost none regarding game dev. tools. Is there a best process for these requirements? Should I develop in pure java, or use some tool like Slick2D etc.? How performance intensive are these properties, if even possible? Edit: There are no collisions in the game or difficult animations, I am imagining simply changing the colors of the tiles (like in the examples), and a client-server architecture

    Read the article

  • Implementing an automatic navigation mesh generation for 2d top down map?

    - by J2V
    I am currently in the middle of implementing an A* pathfinding for enemies. In order to implement the actual A* logic, I need a navigation mesh for my map. I am working on a 2D top down rpg map. The world is static, meaning there is no requirement for dynamic runtime mesh generation. My world objects are pixel based, not tile based and have associated data with them such as scale, rotation, origin etc. I will obviously need some vertex data being generated from my world objects, maybe create a polygon generation from color data? I could create a colormap with objects for my whole map, but I have no idea how to begin creating nav mesh polygons. How would an actual navigation mesh generation look like with this kind of available information? Can anyone maybe point to some great resources? I have looked into some 3D nav mesh tools, but they seem kind of overly complex for my situation and also have a lot of their req data available from models. Thanks a lot in advance! I have been trying to get my head around it for some time now.

    Read the article

  • Oracle Supply Chain at Pella Showcase, April 24-25, 2012

    - by Stephen Slade
    Nothing promtes a product like a grest customer testimony! For nearly a decade, Pella has been holding these 'open-houses' or Showcases as they are called, to illustrate the utilization of Oracle products in their operations. Building custom windows and doors is not an easy task.  With about a trillion combinations of unique sizes, colors and features availalbe, getting the complex multi-unit custom order wrong can be easy to do. I've been to a few of these Showcases and each time,  continually impressed by the precision, best practices and lean disciplines enacted at Pella. Operations representatives and users at Pella, demonstrate the way in which they use Oracle Supply Chain products to deliver fulfillment excellence. Orders are all custom made and delivered in about a week.  Factory tours are conducted and visitors have a chance to see Oracle in operation on the shop floor, driving informational flow and order accuracy in the 99+% range.  It's a must see for anyone considering expansion of their supply chain footprint.  The event is April 24-25 in Pella Iowa, outside Des Moines.   This year, there is a seperate track for CIOs and executives. Register at 1.800.820.5592  - ask for event 10281

    Read the article

  • What to include in metadata?

    - by shyam
    I'm wondering if there are any general guidelines or best practices regarding when to split data into a metadata format, as oppose to directly embedding it within the data. (Specific example below). My understanding of metadata is that it describes data (without the need to actually look at the data), allowing for data to be quickly search/filtered for easy access. Let's take for example a simple 3D model format. The actual data file itself is a binary file containing vertices and colors. Things like creation date, modified data and author name would be things that describe the binary data, so I would say these belong as metadata (outside of the binary file). But what if the application had no need to search or filter by these fields? Would it be acceptable to embed these fields directly into the binary data itself? Could they be duplicated in both the binary data and the meta data, or would this be considered bad practice? What about more ambiguous fields such as the model name, which could be considered part of the data itself, but also as data describing the binary data?... How do you decide which data to embed in the actual binary file, as opposed to separating into a more flexible metadata format? Thanks!

    Read the article

  • Interfaces and Virtuals Everywhere????

    - by David V. Corbin
    First a disclaimer; this post is about micro-optimization of C# programs and does not apply to most common scenarios - but when it does, it is important to know. Many developers are in the habit of declaring member virtual to allow for future expansion or using interface based designs1. Few of these developers think about what the runtime performance impact of this decision is. A simple test will show that this decision can have a serious impact. For our purposes, we used a simple loop to time the execution of 1 billion calls to both non-virtual and virtual implementations of a method that took no parameters and had a void return type: Direct Call:     1.5uS Virtual Call:   13.0uS The overhead of the call increased by nearly an order of magnitude! Once again, it is important to realize that if the method does anything of significance then this ratio drops quite quickly. If the method does just 1mS of work, then the differential only accounts for a 1% decrease in performance. Additionally the method in question must be called thousands of times in order to produce a meaqsurable impact at the application level. Yet let us consider a situation such as the per-pixel processing of a graphics processing application. Here we may have a method which is called millions of times and even the slightest increase in overhead can have significant ramification. In this case using either explicit virtuals or interface based constructs is likely to be a mistake. In conclusion, good design principles should always be the driving force behind descisions such as these; but remember that these decisions do not come for free.   1) When a concrete class member implements an interface it does not need to be explicitly marked as virtual (unless, of course, it is to be overriden in a derived concerete class). Nevertheless, when accessed via the interface it behaves exactly as if it had been marked as virtual.

    Read the article

  • Z Order in 2D with orthographic projection and texture atlas

    - by Carbon Crystal
    I am working with a 2D game in OpenGL ES and have a question about z-order together with a texture atlas. I am using an orthographic projection because I want pixel-perfect rendering of 2D sprites, however from what I can determine the draw order is really the only thing that will determine which textures (sprites) appear above or below their neighbors. That is, the "z-index" is a function of the order in which the textures are drawn as opposed to the z coordinate on the vertex array being drawn. So.. I have a texture atlas to save binding multiple textures for each draw call but this immediately creates a problem if there is more than one atlas in play. If I need to draw textures from more than one atlas (typically the case if I have too many sprites to fit in a single atlas of a reasonable size), then I can't maintain a "draw order" across atlases unless I want to bind/unbind the atlas textures more than once.. which kinda defeats the purpose. Does anyone have any clues as to what the best approach is here? Currently I'm running under an assumption that I will have to declare different fixed "depths" (e.g foreground, background etc) in my 2D scene and assume that the z-order for sprites at a given depth is the same. Then I can have as many atlases as I need at each depth and simply draw the depths in order (along with their associated atlases) I'd love to hear what other people are doing.

    Read the article

  • Toon/cel shading with variable line width?

    - by Nick Wiggill
    I see a few broad approaches out there to doing cel shading: Duplication & enlargement of model with flipped normals (not an option for me) Sobel filter / fragment shader approaches to edge detection Stencil buffer approaches to edge detection Geometry (or vertex) shader approaches that calculate face and edge normals Am I correct in assuming the geometry-centric approach gives the greatest amount of control over lighting and line thickness, as well eg. for terrain where you might see the silhouette line of a hill merging gradually into a plain? What if I didn't need pixel lighting on my terrain surfaces? (And I probably won't as I plan to use cell-based vertex- or texturemap-based lighting/shadowing.) Would I then be better off sticking with the geometry-type approach, or go for a screen space / fragment approach instead to keep things simpler? If so, how would I get the "inking" of hills within the mesh silhouette, rather than only the outline of the entire mesh (with no "ink" details inside that outline? Lastly, is it possible to cheaply emulate the flipped-normals approach, using a geometry shader? Is that exactly what the GS approaches do? What I want - varying line thickness with intrusive lines inside the silhouette... What I don't want...

    Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >