Search Results

Search found 3293 results on 132 pages for 'comodo firewall'.

Page 81/132 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

• Wireless internet connection connects but internet does not work (no packets received). Wired does.

  - by Rodney

  When I connect my PC via ethernet cable to my ADSL router it works fine. When I connect via Wireless it connects and the internet will work for a random amount of time and then stop working. It stays connected with a strong signal but no packets are received. My laptop/iphone are right next to it and wireless works fine. If I open the Wireless USB status, it says it is connected to my SSID with full strength (54 mps - I am 3 meteres away from my router) and the activty shows as Packets 594 SENT and 105 RECEIVED (this goes up VERY slowly) I have tried the following: Turned off anitvirus and firewall completely. Tested the wifi signal- I am writing this on my laptop which is next to my PC and also has full wifi strength. Tried a different wireless adapter - I dug out an old PCI wireless card - it does the exact same thing. Compared all wireless settings to my laptop. I can ping google.com and it replies (sometimes with packet loss) When I reboot the PC it will connect for a minute or two (random time) and then just stops again. I tried Firefox, IE etc. no joy I have updated all latest versions (Netgear WG111v2) and drivers Checked Event Log - nothing unusual Ping the router (and even connect as admin for the few minutes when the internet does work) Changed the MTU down to 1200 using DrTCP Checked Device Manager for conflicts - none. I ping the router from the PC (192.168.0.10 - 192.168.0.1) and it replies with 4 packets. BUT, on my router admin page (which I access via http on my laptop wirelessly) - if I ping 192.168.0.10 all packets timeout (pinging my laptop 192.168.0.12 works fine) My router admin page shows the leased IP address for 192.168.0.10 (ie it is definitely talking to the router initially) Now I am out of ideas - please help. I think it is an OS/Software issue as I have tried 2 different wireless adapaters (PCI and USB) with the same result but all other wireless devices work fine around mine). It's not the firewall. It is getting assigned an IP address correctly (my PC gets 192.168.0.10, my laptop is .12) It is assigned by DHCP. As soon as I plug in the ethernet cable it all works fine. Repairing the adapter sometimes helps but it will always stop working after a random time. The wireless adapter always shows as connected with Excellent signal but the internet does not work. I am running Windows XP SP3 and have tried a Netgear WG111v2 USB adapter. Thanks in advance! UPDATE: The internet seems to be working, it is just either sending packets too small or slow to work (some small pages load bits of them very slowly but then hang). XP seems to have a networking diagnostic app - here is the output: Last diagnostic run time: 08/30/10 08:16:38 IP Configuration Diagnostic Invalid IP address info Valid IP address detected: 192.168.0.10 IP Layer Diagnostic Corrupted IP routing table info The default route is valid info The loopback route is valid info The local host route is valid info The local subnet route is valid Invalid ARP cache entries action The ARP cache has been flushed Gateway Diagnostic Gateway info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list: info This computer has the following default gateway entry(ies): 192.168.0.1 info This computer has the following IP address(es): 192.168.0.10 info The default gateway is in the same subnet as this computer info The default gateway entry is a valid unicast address info The default gateway address was resolved via ARP in 1 try(ies) info The default gateway was reached via ICMP Ping in 1 try(ies) info TCP port 80 on host 65.55.12.249 was successfully reached info The Internet host www.microsoft.com was successfully reached info The default gateway is OK DNS Client Diagnostic DNS - Not a home user scenario info Using Web Proxy: no info Resolving name ok for (www.microsoft.com): yes No DNS servers DNS failure HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Passive): Successfully connected to ftp.microsoft.com. info HTTP: Successfully connected to www.microsoft.com. warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out error Could not make an HTTPS connection. info Redirecting user to support call WinSock Diagnostic WinSock status info All base service provider entries are present in the Winsock catalog. info The Winsock Service provider chains are valid. info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test. info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test. info Provider entry RSVP UDP Service Provider passed the loopback communication test. info Provider entry RSVP TCP Service Provider passed the loopback communication test. info Connectivity is valid for all Winsock service providers. Wireless Diagnostic Wireless - Service disabled Wireless - User SSID action User input required: Specify network name or SSID Wireless - First time setup info The Wireless Network name (SSID) to which the user would like to connect = RodSof Wifi. Wireless - Radio off info Valid IP address detected: 192.168.0.10 Wireless - Out of range Wireless - Hardware issue Wireless - Novice user Wireless - Ad-hoc network Wireless - Less preferred Wireless - 802.1x enabled Wireless - Configuration mismatch Wireless - Low SNR Network Adapter Diagnostic Network location detection info Using home Internet connection Network adapter identification info Network connection: Name=Local Area Connection 2, Device=Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC, MediaType=LAN, SubMediaType=LAN info Network connection: Name=Wireless USB, Device=NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter, MediaType=LAN, SubMediaType=WIRELESS info Both Ethernet and Wireless connections available, prompting user for selection action User input required: Select network connection info Wireless connection selected Network adapter status info Network connection status: Connected HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Active): Successfully connected to ftp.microsoft.com. warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved warn HTTP: Error 12002 connecting to www.hotmail.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out error Could not make an HTTP connection. error Could not make an HTTPS connection.

  Read the article

• Windows Server 2008 Active Directory DNS setup

  - by Mister IT Guru

  I have to setup a small windows network inside my bigger linux/mac infrastructure. In order to get the windows clients logging onto the domain, I have had to make the DC their primary DNS server, which seems to have worked. I would much prefer to have one DNS server running on my network, or at least one authoritative server running on the network. I have a USG 200 router/firewall and I can configure some static records for DNS, but I an not sure what I need to put in order to get DNS and AD working together, and hints and tips appreciated.

  Read the article

• Certain users cannot get to my server

  - by Zeno

  I am finding more and more users that report they cannot reach my server (website or services). Their tracert from that user looks like this: Tracing route to domain.com [*.*.*.255] over a maximum of 30 hops: 1 * * * Request timed out. The server is up and functional and every else reports it is fine. But there are various users who cannot get to it. I have no firewall or anything that would block anyone. Yes, the last part of the server IP is 255. Could this be causing it? http://www.dslreports.com/forum/r18539206-Last-octet-255-bug-on-Windows Or would a certain ISP be denying traffic to my server? Or something on their router level?

  Read the article

• webserver running as nobody cannot resolve domain names

  - by jalal

  if i try to run the following: <?php echo file_get_contents("http://www.yahoo.com/index.html"); ?> through the web server I get a an "php_network_getaddresses: getaddrinfo" error. If I run the same file from the shell with: php test.php then I get the expected file output. This indicates to me that the 'nobody' user, which the webserver runs as, is not able to resolve the domain name, but the shell user can. Any ideas on how to fix this? Further info: CentOS 6, cPanel install, Apache, PHP running as dso. BTW, I've tried disabling the firewall to no effect.

  Read the article

• Setting up SVN+SSH for multiple users through one local user.

  - by Warlax

  Hi, I need to make our SVN repository accessible through the firewall - but without creating a local user for each potential external user. Instead, I would like to set-up SVN+SSH to route all external users through a single local user name. We would like each external user to authenticate with SSH the regular way but then treat their instance of svnserve as if they're all that single local user and possibly, control what parts of the repository each external user can access. I know that I will need to set my svnserve config according to the official guide. I tried, but the instructions are fuzzy and I am relatively a Linux n00b. What exactly are the steps to proceed? and how would you go about testing this? Thanks for your help.

  Read the article

• How not to send all traffic over SBS connection?

  - by Niels R.

  Hi, My girlfriend uses SBS Connection Manager to connect to her company's network. The problem is that the internet connection is überslow at work, so she wants to use the home internet connection to surf the web and use the SBS Connection to get to her work stuff. Normally with a VPN connection you just have to uncheck a box "Send all traffic over VPN connection" or "Use VPN as default gateway" or something like that. As I've never seen this SBS Connection Manager-thing before, I've no idea where to uncheck a similar box. (I've checked the properties of the connection in Network Connections, but it only has a few options about logging and firewall). Thanks for any help in advance! Kind regards, Niels R.

  Read the article

• Proxmox 31 + KVM routing + IP subnet + csf

  - by KeyJey

  We have proxmox 3.1 server in netzner with routuing network and IP subnet block. We want to implement csf firewall without interfering the traffic of the KVM VMs, what would be the easiest way? We readed that we should add this lines to /etc/csf/csfpost.sh: iptables -A FORWARD -d 144.76.223.155 -j ACCEPT iptables -A FORWARD -d 144.76.223.156 -j ACCEPT iptables -A FORWARD -d 144.76.223.157 -j ACCEPT iptables -A FORWARD -d 144.76.223.158 -j ACCEPT iptables -A FORWARD -d 144.76.223.159 -j ACCEPT iptables -A FORWARD -d 144.99.183.323 -j ACCEPT But when we enable csf the ping breaks, this is the network config (IPs are modified): auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address 144.76.166.100 netmask 255.255.255.255 pointopoint 144.76.183.97 gateway 144.76.183.97 # for single IPs auto vmbr0 iface vmbr0 inet static address 144.76.166.100 netmask 255.255.255.255 bridge_ports none bridge_stp off bridge_fd 0 up ip route add 144.99.183.323/32 dev vmbr0 # for a subnet auto vmbr1 iface vmbr1 inet static address 144.76.166.100 netmask 255.255.255.248 bridge_ports none bridge_stp off bridge_fd 0 Thanks in advanced ! :)

  Read the article

• AFXR problem using gradwell secondary DNS

  - by Roaders

  Hi All I use Gradwell.com to provide secondary DNS but I keep getting e-mails along the lines of the following saying that it's not working: You have asked us to provide a secondary DNS service for the following domain(s) Unfortunately, the primary DNS server(s) you specified are not permitting the necessary zone transfers from our servers, or they are not answering "SOA" queries for your domain correctly. I have gone through the support procedure and they weren't that helpful. They have suggested the following: Our secondline team have suggested setting the AXFR to use anouther machine. This will ensure that the transfer is not locked down to one machine and should allow any machine to make the request I don't really know what AFXR is and I only have 1 production machine so I can't set the AFXR to use another one! In previous support correspondence we confirmed that I am allowing transfers to the correct IP and that I have the correct ports open on the firewall. I am running Windows Server 2003. What can I do to try and get these zone transfers working? Thanks

  Read the article

• Running dnsmasq as an authoritative DNS server

  - by Lord Loh.

  I am trying to implement a dynamic dns service for my computers. I have pointed h.lohray.com to my EC2 instance in the NS record of lohray.com and have installed dnsmasq on that system and have made sure to unblock the firewall port. For now, I have statistically added an entry on my /etc/hosts file. 129.118.19.163 i7.h.lohray.com however, i7.h.lohray.com does not resolve correctly with nslookup or dig :-( This is the only time I could have this resolved (online nslookup) - 50.19.103.190 is the IP address of the EC2 instance where dnsmasq is running. Where could I have gone wrong?

  Read the article

• XP Mode as a server, Win 7 as a client

  - by Spyro

  I have two virtual machines (XP Mode). They are connected to each other by a network setting - Internal Network. It is the only working setting. This is the only way I got two virtual XP to ping each other. Now I want to connect each of them from the application that runs on Windows 7 which is hosting both virtual machines, but I can't do that. The firewall on both XP-Mode machines is disabled. Any other networking setting added as additional adapter on Xp-Mode machine does not allow me to connect from Windows 7. So my question is this - how to enable connection from Windows 7 application to XP mode application (client - server)? Point 2 (pass message) work perfectly because of the "internal network" setting. The problem is point 1 and 3.

  Read the article

• Accessing SQL Server in Windows XP Mode Virtual Pc

  - by DavidStein

  I have a laptop running 64bit Windows 7 Ultimate. I created a Virtual PC using Microsoft XP Mode. I've installed SQL Server 2000 on the Virtual Machine. I have SQL Server 2008 R2 installed on the Windows 7 machine (laptop). I can browse to the SQL 2000 instance (it sees it), but I cannot successfully connect using either Windows or SQL Server Authentication. I don't get an error, the attempt just times out. I have the Windows XP Mode Firewall turned off, and there doesn't appear to be anything in the Event logs either. Any ideas how I can query the XP Mode SQL Server from the Windows 7 machine?

  Read the article

• SSH tunnel RDP through gateway server outside the network?

  - by Mike

  I need to access a PC via RDP that is behind a firewall. There's no way to connect to it directly that I know of. What I'd like to do is SSH from that remote PC to my home Ubuntu server, then connect to the remote PC using my home PC with the Ubuntu server as a gateway. I've tried SSH from remote PC to Ubuntu server, tunneling remote port 3389 to 127.0.0.1:3389, then SSH from home PC to Ubuntu server, tunneling local port 13389 to remote port 3389. At that point I try to RDP into: 127.0.0.1:13389, 127.0.0.2:13389, :3389 - no dice. I suppose I could simply set up an SSH server on my home PC and SSH from remote PC into home PC and then establish the tunnel that way, but I'd rather not go through the hassle of installing and configuring an ssh server on my home PC. I know LogMeIn would work here, but I don't want to go that route for various reasons. Any ideas? Thanks!

  Read the article

• Can't enable Windows XP file sharing

  - by colemanm

  The "sharing and security" option in the right-click context menu on a folder is no longer there. The File and Print sharing option is "installed" and turned on in the TCP/IP properties, but the ability to share any folders has disappeared, along with all previously shared folders. Where should I check to see what the issue is here? EDIT From comments below: "Server" service is not starting, see comment below for more... Firewall is completely disabled, too. This is XP Pro, Simple File Sharing is turned on. We've discovered that the "Server" Windows service is not starting on bootup for some reason. When attempting manual start, we get "error 2001: specified driver is invalid."

  Read the article

• Setting up routing for MS DirectAccess to a VMWare EsXi Host

  - by Paul D'Ambra

  I'm trying to set up DirectAccess on a virtual machine so I can demonstrate it's value and then if need be add a physical machine to host it. I'm hitting a problem because the Direct Access machine (DA01) needs to have 2 public addresses actually configured on the external adapter but there is a Zyxel Zywall USG300 between the VMware ESXi host and the outside world. I've summarised my setup in this diagram If I ping from the LAN to 212.x.y.89 I get a response but if I ping from the VM I get destination host unreachable. I used "route add 212.x.y.89 192.c.d.1" and get request timed out. At that point I see outbound traffic allowed on the Zyxel firewall but nothing coming back. I'm past my understanding of routing and VMWare so am not sure how to tie down where my problem lies (or even if this setup is possible). So any help massively appreciated. Paul

  Read the article

• Belkin router issue

  - by walr1

  Hi, My cousin and I bought a wireless Belkin router for testing purposes. Please keep in mind for all of our tests there is no ethernet cable plugged in, just the router's power cord. We have been trying to "flood" it with PING requests on its default address 192.168.2.1, but it isn't doing a thing; not even logging any attempts of too many requests. I've disabled the firewall, disabled PING request block, etc. Any idea why this thing isn't being affected? We sent 4 million packets and it hasn't done a thing. Quite odd! Thanks.

  Read the article

• Sub-process /usr/bin/dpkg returned an error code (1)

  - by rohit

  Hey friends i am getting the following error when i am trying to purge shorewall root@aptosid:/etc# apt-get purge shorewall Reading package lists... Done Building dependency tree Reading state information... Done The following packages will be REMOVED: shorewall* 0 upgraded, 0 newly installed, 1 to remove and 3 not upgraded. 1 not fully installed or removed. After this operation, 1,843 kB disk space will be freed. Do you want to continue [Y/n]? (Reading database ... 212702 files and directories currently installed.) Removing shorewall ... : not found/shorewall: 25: /etc/default/shorewall: :q Stopping "Shorewall firewall": not done (check /var/log/shorewall-init.log). invoke-rc.d: initscript shorewall, action "stop" failed. dpkg: error processing shorewall (--purge): subprocess installed pre-removal script returned error exit status 1 configured to not write apport reports Errors were encountered while processing: shorewall E: Sub-process /usr/bin/dpkg returned an error code (1) root@aptosid:/etc# please help me out ...........?

  Read the article

• RPC Server Unavailable When Trying to Join W2003 Server to W2003 Active Directory Domain

  - by Roel Vlemmings

  I have an Active Directory Domain with a Windows 2003 Standard SP2 Server as the DC. When trying to join an additional Windows 2003 Standard SP2 server to the domain I get message "The following error occurred attempting to join the domain 'My Domain'. The RPC Server is unavailable. The computer is actually added to the Active Directory Computers. I can even right-click and Manage it. I can access file shares from the DC on the other server and vice versa. I can ping the DC from this server and ping the server from the DC using the computer name. The time on both server is the same more or less to the second. RPC service is running on both servers. I can join other computers to the domain and there are no other issues with the domain. Windows Firewall disabled on both computers. NetSetup.LOG shows: NetpSetNetloginDomainCache: DSEnumerateDomainTrustsW failed 0x6ba I looked up this WIN32 Error Code: It is RPC_S_SERVER_UNAVAILABLE.

  Read the article

• Dual WAN port on a WRT54GL

  - by pufferfish

  Is it possible to reconfigure one of the LAN ports on a WRT54GL (running Tomato firmware) to act as a second WAN port? I have the following networks: PPOE connection to ADSL modem (works fine on the normal WAN port) WiFi neighbourhood network (in 178.X.X.X range), via a Mikrotik routerboard which I'd like to put on the WAN side of the router. I'd then like to set up routing so than some traffic (172.X.X.X) is routed to the Mikrotik and the rest to the ADSL modem. p.s. for practical reasons, I can't use the Mikrotik as the firewall/router. Edit: It seems this can be done by editing iptables, can someone tell me exactly how?

  Read the article

• XDMCP works for Solaris, not for RHEL

  - by joshxdr

  I have some old RHEL4 servers that until recently I was able to connect to remotely with Exceed (remote desktop using XDMCP) from my windowsXP PC. My PC is connected to our network by wired LAN. Recently it seems something has changed in our network. I can still connect to all the old Solaris and HPUX servers with Exceed, but for some reason I can no longer connect to the RHEL4 servers. I assume this is some kind of "security" feature turned on in our network. Does anyone know what this might be, and how I can tell IT to re-enable it? Update: A colleague has found that he can connect (very slowly) to these RHEL4 boxes with XDMCP if he is using our VPN from home, but when he is in the office using wired LAN he cannot connect to them. So it seems that there is some kind of firewall or ???, part of our wired LAN network, that is blocking XDMCP traffic from RHEL4.

  Read the article

• SQL Server 2008 lincensing question relating to web servers

  - by Matty Brown

  We purchased SQL Server 2008 Standard licences last year under the server + device CAL licencing model. Since our server has 2 physical CPUs and only 46 clients, this option was by far the cheapest. Now we'd like to be able to query a small number of stored procedures from our Windows Server 2003 Web Edition server, which is in a seperate zone on our firewall. I think SQL Server 2008 Web Edition could be an option to us, but is it possible to replicate/mirror stored procedures and tables to such a server and would we be breaking any rules by doing so? Is this a form of multiplexing? Also, would replication/mirroring work both ways, if we were to want to write back data from the web server?

  Read the article

• OpenVPN Bridge on pfsense: once LAN pings clients, connectivity breaks

  - by Lucas Kauffman

  So I'm using a pfsense openvpn to bridge my LAN segment so VPN users can access the servers. The problem I'm having now is that I can establish a connection, I can ping the LAN server from the VPN, but as soon as I ping the client from the LAN server, there is no connectivity anymore between both parties. So: connect from the VPN client to the LAN = works ping the LAN from the VPN client = works access server from the VPN (ssh, ftp,...) = works ping client from server = doesn't work ping LAN from the VPN client = doesn't work anymore My bridge has em1 and ovpns1 bridged. I noted with tcpdump that ICMP is reaching the bridge between LAN and the VPN segment. But it's not put onto the em1 interface for some reason. My pfsense is running on an ESXi host with th vSwitch port enabled in promiscious mode. Firewall rules allow in and outbound traffic regardless origin or destination.

  Read the article

• Do I really need Microsoft Updates?

  - by Tony Wong

  When I install a fresh copy of XP home (bought it from the store.. not a copy) my pc rocks like lightening speed. But when I start installing all the updates, patches & less .NET 4.0 client (As the .NET 4.0 Client seems to bring machine to slow crawl). The pc starts to slow down.. like there is more resources to watch or something in the background is happening. So could I not get away with a awesome virus protector & awesome firewall set-up and avoid all the patches? The machine I have is a quad 4, 4gb ram and 2.3 GHZ process. Tons of room and the machine can run several apps at one time.. but when the updates happen.. its s-l-o-w!

  Read the article

• How to build a small network/server at home, basics

  - by Moe

  I'm one class away from my BA IT, I took several classes in general IT. Out of all the books I found just two to be really beneficial. I'm trying to get the hands on experience so my question is.... I want to build a small network in my home, wireless and also wired; printer, laptop, desktop, server (I have 4 1TB external drives of movies/music I want to be available to all computers) Where would I start from building a server with my hard drives, good modem, router, switch port, firewall internet speed/connection etc. This is my first project I want to try.

  Read the article

• WIFI: iPhone/iPad getting much slower bandwidth than laptop

  - by Sam

  I just got cable internet installed (Comcast). It claims that my down speed should be 25mbit. Over wifi, I get close to that on my laptop, but only about 8 on average with my iPhone/iPad. I'm using testmy.net in the browser on all devices. I have an ARRIS / Motorola SurfBoard SB6141 DOCSIS 3.0 Cable Modem and a Medialink Wireless N Broadband Router. I read somewhere that disabling WMM and the firewall on the router would help (is this even a safe idea?). I've tried both, and neither seem to make much of a difference, if any at all (sidebar: I've noticed that my download speeds vary wildly with cable internet... on my laptop, I'll get 12 down, then 22 five minutes later. Is this typical for cable internet?).

  Read the article

• Wrong source IP when accessing internet directly from TMG server

  - by jarod1701

  Hi everyone, after implementing a ForeFront TMG server I'm facing only one problem: After I added a second IP to the external adapter I had to manually set "NAT Address Selection" inside the network rule "Internet Access" to the first IP since all others would get blocked by the CISCO firewall. This configuration works as long as traffic comes from the internal network (e.g. browser on clients). Traffic from the TMG directed to the internet always carries the second IP as it's source address and gets blocked. All our other TMGs/ISAs are running fine and I never came across this problem- Does anybody have a clue, coz I don't?! Kevin

  Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >