Search Results

Search found 5367 results on 215 pages for 'devices'.

Page 81/215 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

  • Conditional dev|nfs mount in Linux

    - by o_O Tync
    I have a mount point — let it be /media/question — and two possible devices: a physical HDD and a remote NFS folder. Sometimes I plug the device in physically, in other cases I mount it via NFS. Is there a way to specify both of them in fstab so that executing mount /media/question will preferably choose physical volume, and when it's not available — NFS?

    Read the article

  • Hyper-V Network Boot Legacy Network

    - by Carl
    Hi, I am planning out a Hyper-V R2 Cluster environment. I was wondering if I went to the effort of deploying one of the few methods to network boot from iSCSI inside the guests, whether the legacy network adapter would switch to a synthetic after boot, or whether the connection could be handed to a synthetic network after boot? This is obviously for performance reasons. MS suggests that some emulated devices are capable of switching to synthetic with integration services after boot, but doesn't specifically list all which are capable.

    Read the article

  • Lynx web browser usage

    - by Andrew
    Does anyone still use the Lynx text-only web browser? It would seem useful for certain classes of low-end mobile devices, especially if one is billed per KB of data transfer.

    Read the article

  • AFP, SMB, NFS which is the best data transfer protocol ?

    - by Kami
    I have a computer with large hard disks running Gentoo. I have to serve med/big files via a wired network to Apple devices (all of them running OS X). Which protocol is the best for the following needs ? : Speed Ease of use (by the clients and the server) Less limited (max file size, limited charset for filenames) Security

    Read the article

  • Instant Messenger proxy with web-based, searchable chat logs and mobile support

    - by zpinter
    Does anybody here know of a decent setup for having multiple computers and devices (iPhone/Android) logged into the same IM accounts (yahoo, gtalk, AIM) with consolidated web-based chat logs? I've tried/thought of a few approaches: IRC w/ IRSSI and bitlbee (was nice, but not a great solution for phones and chat logs were painful) Google Talk (would be great if I could just use this, but I need to support Yahoo - perhaps a Jabber relay?) Meebo (can this be used as a proxy?)

    Read the article

  • Using USB HDD with Arcserve / Brightstor

    - by Hilt86
    I am having an issue configuring a standard USB HDD for use with CA Arcserve Brightstor 11.5 SP2 : Under the device list it shows a USB device category but none of my USB drives are listed underneath. I have attempted to "scan devices" but it makes no difference. I have also tried restarting the tape engine to no avail! Is anyone successfully using USB drives with Brightstor?

    Read the article

  • How much of slow and fast flash memory a "flash memory" have? [migrated]

    - by gsc-frank
    Trying to know what is the best of my flash memories to use ReadyBoost I realize that I don't know how much of fast flash memory each of my flash drives have. One can read: In some situations, you might not be able to use all of the memory on your device to speed up your computer. For example, some flash memory devices contain both slow and fast flash memory, but ReadyBoost can only use fast flash memory to speed up your computer. From http://windows.microsoft.com/is-IS/windows7/Using-memory-in-your-storage-device-to-speed-up-your-computer

    Read the article

  • Looking for a good SNMP Browser to run under windows

    - by Littlejon
    I used to use Getif for poking around inside SNMP results from servers and devices. However it no longer works with Windows 7 and 64bit. I am looking for hopefully an OpenSource bit of software that will allow me add MIB's as required and allow me to browse the MIB tree and send a request/walk off to a server to get results. What do you all use?

    Read the article

  • Windows 7 Audio Mixer - Alternative?

    - by barfoon
    Hey everyone, Does anyone know of an app that could serve as an alternative to the mixer in Windows 7? I am looking to quickly adjust the volume of various devices easily (preferably with a keystroke to open the panel perhaps?). If anyone knows of any other tools/shortcuts, please post them here. Thanks!

    Read the article

  • Linux Fiber Channel Host Setup Basic

    - by Jim
    I've been googling for about 4 hours now with no luck. I am trying to setup a Linux server running Oracle Server 6.3 as a Fiber Channel host. And then connect it to a Dell Compellent Fibre Channel Host contain a 500GB Volume. The Oracle server itself contains two Brocade 815 FC HBAs. I've discovered their WWN(I think) via cat /sys/class/fc_host/host1/port_name 0x100000051efc3d85 cat /sys/class/fc_host/host2/port_name 0x100000051efc3d9f The next part is where I am at a loss. I've used iSCSI before...is FC the same deal where you have an initiator and a target? If so where do I specific that in linux? I'm also new to Fiber Channel as a protocol, so i am unsure what is needed to make a transaction? WWN and port ID? Similar to IP:Port combination in the Ethernet world. I've read alot regarding using systool, multipath, fc_transport commands, however none of these is recognized as a valid command from Oracle Server 6.3 Appreciate the guidance and assistance. I installed sccsi-target-utils and can now run rescan-scsi-bus and sg_map -x. rescan-scsi-bus.sh -l -w -r Host adapter 0 (megaraid_sas) found. Host adapter 1 ((null)) found. Host adapter 2 ((null)) found. Host adapter 3 (ata_piix) found. Host adapter 4 (ata_piix) found. Scanning SCSI subsystem for new devices and remove devices that have disappeared Scanning host 0 for SCSI target IDs 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15, LUNs 0 1 2 3 4 5 6 7 Scanning for device 0 2 0 0 .... OLD: Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC H700 Rev: 2.30 Type: Direct-Access ANSI SCSI revision: 05 Scanning for device 0 2 1 0 ... OLD: Host: scsi0 Channel: 02 Id: 01 Lun: 00 Vendor: DELL Model: PERC H700 Rev: 2.30 Type: Direct-Access ANSI SCSI revision: 05 Scanning host 1 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning for device 1 0 3 1 ... OLD: Host: scsi1 Channel: 00 Id: 03 Lun: 01 Vendor: COMPELNT Model: Compellent Vol Rev: 0505 Type: Direct-Access ANSI SCSI revision: 05 Scanning host 2 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning host 3 for all SCSI target IDs, LUNs 0 1 2 3 4 5 6 7 Scanning for device 3 0 0 0 ... REM: Host: scsi3 Channel: 00 Id: 00 Lun: 00 DEL: Vendor: TEAC Model: DVD-ROM DV-28SW Rev: R.2A Type: CD-ROM ANSI SCSI revision: 05 Scanning host 4 channels 0 for SCSI target IDs 0, LUNs 0 1 2 3 4 5 6 7 0 new device(s) found. 1 device(s) removed. and sg_map -x /dev/sg0 0 0 32 0 13 /dev/sg1 0 2 0 0 0 /dev/sda /dev/sg2 0 2 1 0 0 /dev/sdb /dev/sg4 1 0 3 1 0 /dev/sdc I'm not sure what this all means...

    Read the article

  • Solution to route/proxy SNMP Traps (or Netflow, generic UDP, etc) for network monitoring?

    - by Christopher Cashell
    I'm implementing a network monitoring solution for a very large network (approximately 5000 network devices). We'd like to have all devices on our network send SNMP traps to a single box (technically this will probably be an HA pair of boxes) and then have that box pass the SNMP traps on to the real processing boxes. This will allow us to have multiple back-end boxes handling traps, and to distribute load among those back end boxes. One key feature that we need is the ability to forward the traps to a specific box depending on the source address of the trap. Any suggestions for the best way to handle this? Among the things we've considered are: Using snmptrapd to accept the traps, and have it pass them off to a custom written perl handler script to rewrite the trap and send it to the proper processing box Using some sort of load balancing software running on a Linux box to handle this (having some difficulty finding many load balancing programs that will handle UDP) Using a Load Balancing Appliance (F5, etc) Using IPTables on a Linux box to route the SNMP traps with NATing We've currently implemented and are testing the last solution, with a Linux box with IPTables configured to receive the traps, and then depending on the source address of the trap, rewrite it with a destination nat (DNAT) so the packet gets sent to the proper server. For example: # Range: 10.0.0.0/19 Site: abc01 Destination: foo01 iptables -t nat -A PREROUTING -p udp --dport 162 -s 10.0.0.0/19 -j DNAT --to-destination 10.1.2.3 # Range: 10.0.33.0/21 Site: abc01 Destination: foo01 iptables -t nat -A PREROUTING -p udp --dport 162 -s 10.0.33.0/21 -j DNAT --to-destination 10.1.2.3 # Range: 10.1.0.0/16 Site: xyz01 Destination: bar01 iptables -t nat -A PREROUTING -p udp --dport 162 -s 10.1.0.0/16 -j DNAT --to-destination 10.3.2.1 This should work with excellent efficiency for basic trap routing, but it leaves us completely limited to what we can mach and filter on with IPTables, so we're concerned about flexibility for the future. Another feature that we'd really like, but isn't quite a "must have" is the ability to duplicate or mirror the UDP packets. Being able to take one incoming trap and route it to multiple destinations would be very useful. Has anyone tried any of the possible solutions above for SNMP traps (or Netflow, general UDP, etc) load balancing? Or can anyone think of any other alternatives to solve this?

    Read the article

  • WiFi connection help(Kali Linux)

    - by LoganR
    Ok so here's my problem. I CAN connect to my router using my passphrase. Everything goes through just fine, but I can't use anything that requires an internet connection (apt-get, Iceweasel). My router is properly configured as all other devices work fine. I can't even get into my router's configuration page or view anything else on the LAN. Also, yes I'm sure the security type is set to the correct type.

    Read the article

  • Is possible to boot on PXE over a WiFi device?

    - by Diogo Rocha
    As I know it is possible to boot up some bootable images (like Linux, Clonezilla, management applications and others) over a PXE (Preboot Execution Environment) server with an Ethernet device (802.3). Can the same thing be done with an Ethernet WiFi (802.11) device? I tested with my notebook but my BIOS appears to not enable booting from WiFi devices. Is it possible with some specific WiFi cards and/or a specific BIOS?

    Read the article

  • Is Steam for Mac effectively running as superuser?

    - by godDLL
    When you download the client it does not weigh too much, and seems to do very little. Inside the app bundle there is a script that—upon inspecting the environment and deciding you're not running Linux—launches the client, which downloads the full support environment and resources. For this to happen (all of this is saved inside the bundle, the app bundle gets updated in this process) Steam wants Universal Access for Assistive Devices, and your password. Cacheable resources, preferences (like keyboard shortcuts), support files (like game hardware requirement lookup tables) live inside the bundle, not in ~/Library/{Application Support|Preferences|Cache}; games' data get dumped into ~/Documents/Steam Content. I'd describe myself as a bit OCD (which really says a lot), and I wouldn't care that much still. I'd go comb this hairy mess and find out where stuff is, when and if I need to, even if it's in an unfamiliar place; that does not actually tick me off. Well, a little bit. What makes me concerned is the way Steam needs both Access for Assistive Devices, and my password to run. The former gives it the ability to talk very intimately with running apps and the underlying system; while the latter (admin account) could very well give it and it's publishers unrestricted access to all my software, hardware and data. With publishers like Rockstar using scene NOCD cracks to publish their games on Steam, I'm not so sure I'm OK with this. I'd like more games made available for the MacOS X and all the pretty machines that run it, but this arrangement does not seem very Mac-like to me. It looks like Valve is going around system security measures and best practices, foregoing sandboxing, code signing, relatively sane structured organization; all the things that would appeal to someone who's no fun at parties at all, and will die alone, in his long dead mother's basement… wait. Right. Anyway. Can we get some input on Steam for Mac security at the end-user machine, from someone who understands how Accessibility API works, whether games distributed on Steam can read and write outside the user homefolder, collect data from other running apps, or similar?

    Read the article

  • How to activate Virtual Desktop on Fortigate 100A ?

    - by Deniz
    We did recently update the firmware on our Fortigate 100A box and after the upgrade we tried to use the "Virtual Desktop" feature. (This isn't a new firmware feature) We can't find a way to activate or use it. Does anyone have any experience on "Virtual Desktop" of Fortigate devices ?

    Read the article

  • How to setup a Wi-Fi 2-computer network with Internet sharing?

    - by Narek
    I have the following devices: Desktop Computer (Windows XP Professional) Laptop Computer (Windows Vista Home Premium) A USB modem that I want to connect to my Desktop computer (so my Desktop has Internet) And a Wi-Fi router (D-Link, model: DIR-300) that I want to use in order to create a connection between mentioned two computers to be able to share files and what is the most important thing to make my laptop to have access to the Internet. What steps I should do to have this system?

    Read the article

  • Aliased network interfaces and isc dhcp server

    - by Jonatan
    I have been banging my head on this for a long time now. There are many discussions on the net about this and similar problems, but none of the solutions seems to work for me. I have a Debian server with two ethernet network interfaces. One of them is connected to internet, while the other is connected to my LAN. The LAN network is 10.11.100.0 (netmask 255.255.255.0). We have some custom hardware that use network 10.4.1.0 (netmask 255.255.255.0) and we can't change that. But we need all hosts on 10.11.100.0 to be able to connect to devices on 10.4.1.0. So I added an alias for the LAN network interface so that the Debian server acts as a gateway between 10.11.100.0 and 10.4.1.0. But then the dhcp server stopped working. The log says: No subnet declaration for eth1:0 (no IPv4 addresses). ** Ignoring requests on eth1:0. If this is not what you want, please write a subnet declaration in your dhcpd.conf file for the network segment to which interface eth1:1 is attached. ** No subnet declaration for eth1:1 (no IPv4 addresses). ** Ignoring requests on eth1:1. If this is not what you want, please write a subnet declaration in your dhcpd.conf file for the network segment to which interface eth1:1 is attached. ** I had another server before, also running Debian but with the older dhcp3 server, and it worked without any problems. I've tried everything I can think of in dhcpd.conf etc, and I've also compared with the working configuration in the old server. The dhcp server need only handle devices on 10.11.100.0. Any hints? Here's all relevant config files: /etc/default/isc-dhcp-server INTERFACES="eth1" /etc/network/interfaces (I've left out eth0, that connects to the Internet, since there is no problem with that.) auto eth1:0 iface eth1:0 inet static address 10.11.100.202 netmask 255.255.255.0 auto eth1:1 iface eth1:1 inet static address 10.4.1.248 netmask 255.255.255.0 /etc/dhcp/dhcpd.conf ddns-update-style none; option domain-name "???.com"; option domain-name-servers ?.?.?.?; default-lease-time 86400; max-lease-time 604800; authorative; subnet 10.11.100.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; pool { range 10.11.100.50 10.11.100.99; } option routers 10.11.100.102; } I have tried to add shared-network etc, but didn't manage to get that to work. I get the same error message no matter what...

    Read the article

  • Problems connecting Clariion LUNS to Solaris 10

    - by vialde
    I've got a Clariion San and a Solaris 10 server with an emulex HBA. The Thin LUNS are visible in Solaris and I can happily format the raw devices. Unfortunately that's all I can do. All other operations result in I/O errors. I'm running current versions of PowerPath and Solaris is patched as high as it'll go. Anyone have any similar experiences?

    Read the article

  • Arp tries on various *nix based systems.

    - by salparadise
    Does anyone know what determines the amount of arp tries a router will make? I have different behaviors with two devices, if I try to traceroute to a non-existent host on a subnet that belongs to an interface on the router, a Linux box will try to arp 3 times and then return a host un-reacheable icmp message. Junos will continuosly try to arp and not return anything. Is there a sysctl value that determines this or anything at all.

    Read the article

  • How can I use Outlook 2007 to connect to mail service using active sync protocol

    - by Dan
    Has anyone tried connected outlook(I am running v2007 on Windows 7) to a mail service using the MS Exchange Active Sync protocol? If so, how did you do it? Wouldn't this solution probably eliminate the need for all the hacks/APIs needed to connect outlook to 'X' mail (Gmail, notes, etc)? I know it is intended for mobile devices, but to me it looks like it is becoming the latest 'de facto' mail protocol for email/calendar/contact sync'ing due to the iPhone's support for it. Thanks!

    Read the article

  • Laptop kicks other users off the wifi when it connects, then gets disconnected itself

    - by Devon
    I've got an Acer Aspire One running Linux. When I connect to my building's wifi, everything seems fine for a short period of time (I can google a few things or start downloading an Apt package), but then other devices on the network lose their IP addresses. Shortly after that, my computer also gets disconected. My computer is set to use DHCP. What causes this, and do you know how it could be fixed? Am I causing a broadcast storm?

    Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >