Search Results

Search found 5367 results on 215 pages for 'devices'.

Page 83/215 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

  • wireless ethernet adapter with EAP-PEAP?

    - by Joseph
    We have a wireless network set up to support WPA or WPA2 with AES or TKIP encryption and EAP-PEAP authentication. Users are wanting to connect devices that don't have the ability to do EAP-PEAP but have ethernet ports. I have found a wireless printer server that can do this, but I have yet to find a wireless ethernet adapter that can. Has anyone seen one with this ability?

    Read the article

  • Wireless Network Performance Issues

    - by colithium
    My brand new Dell XPS system has been running flawlessly except its abysmal download speeds. I have tried isolating every variable I could possibly think of but I can't figure out the problem. I've talked to Dell and Belkin without making progress (thought I'd try). Here are the speeds: Note that most of the time, upload speeds are actually much faster than download speeds (around 4.0 Mb/s which is better than most other devices on the network) It's not the ISP. The slowdown happens even when transferring files inside the network. Plus every other wireless device gets approximately this: It's not the wireless router. It's a Lynksis WRT160N v1 with the latest firmware (1.02.2). Plus everything else connected to it has normal speeds. It's not the browser. Speeds are the same in IE, FF, and when transferring files with Windows between computers. It's not the wireless adapter. I've tried a Belkin N Wireless USB Adapter (which works fine on another computer) and a Dell Wireless Draft 802.11n WLAN Mini-Card. They have the same slow speeds when connected to the problem computer. It's not the adapter connection. One adapter used USB and the other is a Mini-Card. It's not antenna placement. With the same antenna position and the same device, I get different speeds when connected to the problem computer vs a good computer. Plus everything reports the connection speed as at least 11Mbps and good signal strength. I've tried disabling IPv6 since it sometimes causes weird problems. I've tried disabling Windows Firewall/anti-virus. I've ensured the computer has updated drivers for both adapters. I've ensured that Windows is up to date and so is the BIOS. For the USB adapter I ensured that that USB port functioned at normal speeds with other USB devices. What else could it possibly be? I finally received my copy of Windows 7 and will be trying that. I'd rather not install Windows 7 because of a particular program that will stop working so a solution besides that is welcome. Specs: Vista x64 Core i7 920 6GB RAM 500GB HD GTX 260

    Read the article

  • USB thermometer that works in Linux

    - by ttvd
    Hello! I am constructing a small robot based on an embedded board running linux. I am looking for a USB thermometer device, which will work with 2.6 kernel. So far I found a bunch of devices, but it's not clear whether they have linux drivers or not (no description). Thanks in advance.

    Read the article

  • How to set the time HylaFax waits for the remote device to pick up

    - by Flo
    I'm using HylaFax on one of my server to send facsimile to different devices which works pretty well except for one device. I'm not sure, but the problem might be, that the remote device takes to long to pick up and response to the call. I tested it by calling the fax number with my phone and it took 30 seconds till the remote side picked up. So is there a way to tell HylaFax how long it should wait for the remote device to answer?

    Read the article

  • How do I troubleshoot an IPsec tunnel (from a cellular router to a public server)?

    - by Hanno Fietz
    I'm new to IPsec and struggling with a setup that might soon be widely used in our operations (provided I do understand it, eventually...). A cellular router (blackbox by netModule, from its log messages it seems to be running Linux and OpenSwan) connects a sensor network on customers' sites with our public server. We need to be able to connect into the local network, so I had the cell provider give me a public IP (a dynamic one). The way their setup works, the public IPs only allow IPsec traffic. I set up OpenSwan on our Ubuntu server (running Jaunty). This is my connection config from /etc/ipsec.conf: conn gprs-field-devices left=my.pub.lic.ip [email protected] #leftsubnet=192.168.1.129/25 right=%any [email protected] #rightsubnet=192.168.1.1/25 #rightnexthop=%defaultroute auto=add On the router, all I have is the Web UI, in which I made the following settings: "Remote endpoint": public IP of server, same as "left" above "Local Network Address": 192.168.1.1 "Local Network Mask": 255.255.255.128 "Remote Network Address": 192.168.1.129 "Remote Network Mask": 255.255.255.128 The pluto process on the server is listening for connections on port 500. It can't open a tunnel, obviously, because it doesn't know at which IP the client is. I set up a passphrase as PSK for @field.econemon.com in /etc/ipsec.secrets and also configured it in the router (which doesn't seem to support certificates). My problem is, nothing happens. The router just says, IPsec is "down". When I copy-paste the IP into ipsec.conf (for "right="), and ask the server to ipsec auto --up gprs-field-devices, it just hangs until I press Ctrl-C. Is there anything wrong with my setup? How can I debug this further? My router gives the following loglines that seem related, but don't tell me anything: Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.d/hostkey.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: loading secrets from "/etc/ipsec.d/netbox0.secrets" Feb 21 23:08:20 Netbox authpriv.warn pluto[2497]: "netbox00" #1: initiating Main Mode Feb 21 23:08:20 Netbox daemon.err ipsec__plutorun: 104 "netbox00" #1: STATE_MAIN_I1: initiate Feb 21 23:08:20 Netbox daemon.err ipsec__plutorun: ...could not start conn "netbox00" Feb 21 23:08:22 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: ignoring informational payload, type NO_PROPOSAL_CHOSEN Feb 21 23:08:22 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: received and ignored informational message Feb 21 23:08:28 Netbox user.warn parrot.system_controller[762]: IPSECCTRLR: Tunnel 0 is down for 0 seconds Feb 21 23:08:40 Netbox user.warn parrot.system_controller[762]: IPSECCTRLR: Tunnel 0 is down for 10 seconds Feb 21 23:08:52 Netbox authpriv.warn pluto[2497]: packet from 188.40.57.4:500: ignoring informational payload, type NO_PROPOSAL_CHOSEN

    Read the article

  • Are flash drives always bootable?

    - by user23950
    I have this 8 gb toshiba flash drive and my motherboard also allows booting from removable devices. But I don't know, I've already tried to make the fd bootable and set in the bios to boot from fd. But it doesn't work. Are flash drives always bootable?

    Read the article

  • COnditional mount in LInux

    - by o_O Tync
    I have a mount point — let it be /media/question — and two possible devices: a physical HDD and a remote NFS folder. Sometimes I plug the device in physically, in other cases I mount it via NFS. Is there a way to specify both of them in fstab so that executing mount /media/question will preferably choose physical volume, and when it's not available — NFS?

    Read the article

  • Building a Mac/PC Network in a Dorm with Network Restrictions

    - by user70340
    I have been a Windows XP user for the last few years, but I recently bought a 15'' MacBook Pro for research purposes. I would like to set up a no-hassle Mac/PC Network at home so that I can access the internet on both computers and hardware between computers (i.e. a harddrive, or a mouse/keyboard with Synergy). Unfortunately, I live in a dorm with silly network restrictions so a solution is not straightforward. In particular: The dorm has a wired and wireless network, both which provide an internet connection. The wired network provides way faster internet (download speeds of 15 MB/s vs. 2 MB/s on wireless), so I would like to somehow exploit this, at least on my PC for Bittorrent :) Multiple devices can connect to the wireless network, but cannot "see" each other on the network (so software like Synergy would not work). Only 1 MAC address can connect to the wired network at a time. Ideally I would just connect a wireless router to the wired network and then have both the Mac and the PC on that, but the 1 MAC address restriction will not allow the both computer to access the internet simultaneously. I cannot think of a way to bypass this restriction (though I'm not network savvy), so I am planning to create a private no-internet network to allow the devices to see each other and share hardware. Here are some thoughts. I would appreciate any feedback at all! If I build a private wireless network: (first choice) I will use a wireless router that is not connected to the internet. My PC and Mac will be connected to each other wirelessly. I can then connect the PC to the internet via a wired network, but then the Mac will not have internet access as its wireless card is already in use. In this case, could I stream internet access from the PC to the Mac via the wireless network? Or could I buy a USB wireless card for the Mac so that it can connect to both my private network and the dorm network? If I build a private wired network: (second choice) Then both the PC and the Mac will connect to the internet wirelessly, which means I cannot take advantage of the faster download speeds.

    Read the article

  • How do I create a bridged virtual network for libvirt+KVM+ubuntu-server the easy way?

    - by Arthur Ulfeldt
    I see lots of documentation on how to manually set up a network bridge and then manually add vm's tun devices to these bridges and then write a shell script that glues it all together. lots of work, very manual, and not impressive. On the other hand if you want to use NAT to KVM+libvirt VMs to the network you just click the new network button in the virt-manager gui and relax. Am I missing "the easy way" of causing a VM to share the physical network with the host?

    Read the article

  • Fixing Master Boot Record From Linux After Windows Corrupts It

    - by Chris S
    I bought a Dell Inspiron 1545 laptop, and setup Ubuntu 10.04 to dual boot alongside Windows 7. Regrettably, when activating the wireless, I did something in Windows 7 that caused it to overwrite or corrupt the master boot record, so now when I reboot I get the message "No bootable devices found". Is there an easy way to fix this, perhaps via a Linux LiveCD, or do I have to wipe out everything and reinstall?

    Read the article

  • usb audio recording: clicking noice

    - by snot
    I'm having problems recording audio on windows using usb audio devices. The recorded material will have some kind of jitter/clicking noice. I tested three different usb microphones and three different recording applications. Every combination will have the same problem. Does some one know a solution for this problem?

    Read the article

  • Windows Server not installing audio drivers properly

    - by user34322
    I am trying to install a dummy sound card on a Windows Server machine (in Amazon EC2 cloud) in order for one of my application to work. I'm trying to accomplish that with Virtual Audio Cable and REAUDIO3. Both tools managed to install a new device on my Windows XP machine, but on Windows Server, no new devices appear. Windows Audio and Plug and Play services are Started and Automatic. ANY ideas are greatly appreciated.

    Read the article

  • Vista stuck at "Shutting down..." screen. Any way to get verbose logging?

    - by CapBBeard
    Hi all, My home machine has been running fine for about 3 years, no problems at all. Within the last couple of weeks it's had real trouble trying to shut down. It'll get so far and then just sit there at the "Shutting down..." screen for hours. I've left it overnight, I've tried in safe mode, all to no avail. These days, I just wait for the disk activity to finish up and then hold the power button to turn it off. Feels dirty as, especially because there's a RAID involved! The hardware itself is in pretty good shape and of decent spec; Core 2 Quad, 4GB RAM, 1TB RAID 1+0, so it's not quite like a 7 year old PC coming to end of life! In the last month, hardware hasn't changed except for a new monitor. Admittedly I haven't tried unplugging the monitor but I've never heard of that preventing a shutdown. I might give it a whirl later I guess, as a last resort. I've uninstalled old apps, done updates, checked the event log, looked in device manager, uninstalled all non-present devices, disabled various non-critical devices (imaging, audio etc), unplugged peripherals, stopped non-essential services, unplugged the network, disabled the network adapter entirely, ran chkdsk, verified my RAID, the list goes on. But not a single lead. I'm pretty stumped. It could be hardware, but I have no other evidence to suggest so; when the PC is running, it runs fine. Temperatures are good, gaming is smooth as always, disk performance is fine. Event log even makes it look like the shutdown was completed (gets to the point where the event log service stops). In fact, the PC doesn't appear to realise that I cut the power to it. So my question is, does anyone know if there is a way I can get some verbose output (or a log) from shutdown to give me some idea of what is causing the issue? I'm guessing it's stuck unloading some app/driver but it would be good to get some specifics! Unless anyone has any other ideas? I suspect a reinstall would resolve the issue, however I'm looking to get a new PC built in the next month or so, and the reinstall is going to be quite a big job so I'd rather just wait until then if it comes to that. Would still be nice to get this sorted in the mean time though. Cheers!

    Read the article

  • Terminal services and screen savers

    - by Corsair
    I have a Window Server 2008 R2 server acting as a terminal server for mobile devices running a single application, but I am having issues with the screen saver popping on after ten minutes. Is there a setting in terminal services to make the screensaver settings universal? If not, how should I approach this issue?

    Read the article

  • Virtual Disk Manager: The service cannot be started

    - by MikkoP
    I installed a SSD disk in my computer and installed Windows 7 in it. I disabled defragmentation on the disk. Now when I try to partition my other disk I'm getting an error Virtual Disk Manager The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. Well, I'm not willing to enable defragmentation because it makes the lifespan of the SSD shorter. Solutions? Thanks

    Read the article

  • Samsung "Kies via Wifi" doesn't work, stuck on "Loading..."

    - by eyalb99
    When I connect my Galaxy S2 to my laptop using "Kies via Wifi" it doesn't work. On my phone it tells me it is connected, and on the laptop I can see the device "GT-I9100" under connected devices, but I see no files or anything else. When I move the mouse icon over the "GT-I9100", it writes "Loading...". I've waited long enough but nothing happens. When I connect the phone using USB cable, it works perfectly fine.

    Read the article

  • Cannot send or receive files over Bluetooth

    - by denise
    I have a Lenovo ThinkPad laptop and running Windows Vista. Previously I could send and receive files between my phone and my laptop but now it won't work. Every time I select a file, right-click and select "Send to", and select "Bluetooth devices", the box appears but there's nothing there. Even if I turn my laptop's Bluetooth on, my phone can't find it and vice versa. What could be the problem and how can I fix this?

    Read the article

  • Which twitter client can synchronize unread tweets?

    - by Tom Burger
    Right now I'm forced to read all the tweets in a single client on a single device (TweetDeck on my Android phone). If I would switch to another device and/or client, I would need to search for the last unread tweet, which is sometimes complicated (too many tweets). So, the question: Is there a client who can keep the status (read/unread) on tweets across multiple devices? My target systems would be now Android and MS Windows, but also Linux might be handy.

    Read the article

  • video player recommendation (hardware)

    - by Fuxi
    hi all, i'm looking for a hardware-videoplayer with the following features: support for all kind of video formats from the web (xvid, divx, mpeg ..) w/o problems slots for memory cards like cf/sd usb connector for external devices like hd/usb sticks updateable firmware support for .srt files (subtitles) - option to change eg. fontsize currently i'm having a dvd player with memory slot but it only supports a few formats and it's very annoying having to convert anything - mostly it doesn't work. thx in advance

    Read the article

  • DVD drive not recognized

    - by David Oneill
    I'm in the midst of building a computer (first time builder) I got everything plugged in, and hit the power button. After the excitement of the first boot coming up on my screen, I was looking through the BIOS settings. However, joy soon turned sour, as I looked at the list of installed SATA devices. My DVD drive wasn't on the list :( So, what are common things I should check/try?

    Read the article

  • How to configure DD-WRT routing table when creating an isolated network segment for PCI C VT compliance

    - by tetranz
    I'm the volunteer support and system admin person at a small private school. We need to setup a PCI compliant Windows PC as a virtual terminal for credit card processing. I've read questionnaire SAQ C-VT and, to quote, this computer needs to be accessed: "via a computer that is isolated in a single location, and is not connected to other locations or systems within your environment (this can be achieved via a firewall or network segmentation to isolate the computer from other systems)" Our setup is as follows: DSL modem from ISP is setup to be a "transparent pipe" with no extra services. That goes into the WAN port of Linksys WRT54-GL running a DD-WRT. The LAN is 192.168.1.x. There are a couple of other WRT54-GL / DD-WRT devices. One is used as a wireless AP and another is a client bridge. To isolate the VT (virtual terminal) machine, I have another DD-WRT device. Its WAN is connected to a port on the 192.168.1.x LAN. The virtual terminal machine is connected to its LAN which is at 192.168.10.x. The SPI Firewall etc is turned on. It's basically the default DD-WRT gateway setup where the "ISP" is our own LAN. That's working. All incoming traffic to the VT machine is blocked, including from our own LAN. The VT can access the internet BUT, and here's the problem, it can also ping any of the computers on the 192.168.1.x LAN. I think I need to stop that. I'm guessing that I could do something with the Static Routing table in the VT machine's DD-WRT device. I need to route anything going to 192.168.1.x other than the gateway which is 192.168.1.1 to 0.0.0.0 or something like that. That's where I'm stuck at the end of my knowledge. Or ... do I need to get yet another DD-WRT so the network is "balanced". Maybe I need to have the internet from the DSL going into a DD-WRT which has only two devices on its LAN i.e., two other DD-WRTs, one for the main LAN and one for the VT. I think that would do but I'd like to avoid the extra cost and complexity if I don't need it. Thanks

    Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >