Search Results

Search found 2519 results on 101 pages for 'duplex printing'.

Page 81/101 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

  • My facebook blocking ACL has stopped working

    - by Josh
    This probably very simple. This was setup before I arrived, and has been working to block facebook. I recently eliminated some static port forwarding on this 2691 (as in, I don't think anything else has changed), and now facebook is once again accessible. Why is this list not doing what it seems like it should be doing (and was doing)? Would an extended outbound ACL be more appropriate (I think that would have been my thought if I had been tasked with creating this in the first place)? Something different? I've included below what I believe are the relevant parts of the config. interface FastEthernet0/0 ip address my.pub.ip.add my.ip.add.msk ip access-group 1 in ip nat outside ip virtual-reassembly duplex auto speed auto access-list 1 deny 69.171.224.0 0.0.31.255 access-list 1 deny 74.119.76.0 0.0.3.255 access-list 1 deny 204.15.20.0 0.0.3.255 access-list 1 deny 66.220.144.0 0.0.15.255 access-list 1 deny 69.63.176.0 0.0.15.255 access-list 1 permit any ip nat inside source list 105 interface FastEthernet0/0 overload access-list 105 deny ip 192.168.0.0 0.0.0.255 192.168.8.0 0.0.0.255 access-list 105 permit ip 192.168.0.0 0.0.0.255 any access-list 105 permit ip 192.168.1.0 0.0.0.255 any EDIT ACL is once again blocking Facebook. Here is the new definition for those interested... access-list 1 deny 66.220.144.0 0.0.7.255 access-list 1 deny 66.220.152.0 0.0.7.255 access-list 1 deny 69.63.176.0 0.0.7.255 access-list 1 deny 69.63.176.0 0.0.0.255 access-list 1 deny 69.63.184.0 0.0.7.255 access-list 1 deny 69.171.224.0 0.0.15.255 access-list 1 deny 69.171.239.0 0.0.0.255 access-list 1 deny 69.171.240.0 0.0.15.255 access-list 1 deny 69.171.255.0 0.0.0.255 access-list 1 deny 74.119.76.0 0.0.3.255 access-list 1 deny 173.252.64.0 0.0.31.255 access-list 1 deny 173.252.70.0 0.0.0.255 access-list 1 deny 173.252.96.0 0.0.31.255 access-list 1 deny 204.15.20.0 0.0.3.255 access-list 1 permit any

    Read the article

  • TCP/IP & throughput between FreeNAS (BSD) server & other LAN machines

    - by Tim Dickerson
    I have got a question for someone that knows BSD a bit better than me that are in regards to my LAN setup at home/work here outside Chicago. I can't seem to fully optimize my network's (LAN) thoughput via my FreeNAS (BSD based) file server. It runs with the latest FreeBSD release which is modified to support several protocols for file transfers and more. Every machine that is behind my Smoothwall (Linux based) router is on the usual 192.168.0.x subnet and for most part works just fine. Behind the Smoothwall box, all machines are connected to a GB HP unmanaged switch. I host a large WISP here and have an OC-3 connection here at home/work and have no issues with downloading/uploading from/to the 'net'. My problem is with throughput. When I try and transfer large files...really any for that matter..between any of the machines to/and from the FreeNAS server via FTP, the max throughput I can achieve say between a Win 7 or a Linux box is ~65Mbit/sec. All machines are running Intel Pro 1000 GB NIC's and all cable is CAT6. Each is set to 'auto negotiation' and each shows 1500 MTU Full Duplex @1GB so I know the hardware is okay. I have not adjusted the MTU on any machine as I understand it to be pointless unless certain configurations are used (I assume I am not one of those). My settings for the FreeNAS machine are the following: # FreeNAS /etc/sysctl.conf - pertinent settings shown kern.ipc.maxsockbuf=262144 kern.ipc.nmbclusters=32768 kern.ipc.somaxconn=8192 kern.maxfiles=65536 kern.maxfilesperproc=32768 net.inet.tcp.delayed_ack=0 net.inet.tcp.inflight.enable=0 net.inet.tcp.path_mtu_discovery=0 net.inet.tcp.recvbuf_auto=1 net.inet.tcp.recvbuf_inc=524288 net.inet.tcp.recvbuf_max=16777216 net.inet.tcp.recvspace=65536 net.inet.tcp.rfc1323=1 net.inet.tcp.sendbuf_inc=16384 net.inet.tcp.sendbuf_max=16777216 net.inet.tcp.sendspace=65536 net.inet.udp.recvspace=65536 net.local.stream.recvspace=65536 net.local.stream.sendspace=65536 net.inet.tcp.hostcache.expire=1 From what I can tell, that looks to be a somewhat optimized profile for a typical BSD machine acting as a server for a LAN. I might be wrong and just wanted to find out from someone that knows BSD better than I do if indeed that is ok or if something is out of tune or what. Are there other ways I would find better for P2P file transfers? I honestly do not know what I SHOULD be looking for with respect to throughput between the NAS box and another client when xferring files via FTP, but I am told that what I get on average (40-70MB/sec) is too low for what it could be. I have thought about adding another NIC in the FreeNAS box as well as the Win7 machine and use a X-over cable via a static route, but wanted to check with someone first to see if that might be worth it or not. I don't know if doing that would bypass the HP GB switch and allow for a machine to machine xfer anyways. The FTP client I use is: Filezilla and have tried both active and passive modes with no real gain over each other. The NAS box runs ProFTPD.

    Read the article

  • Windows 2003 Storage Server Hanging on Large File Transfers

    - by user25272
    In one of our offices we have a Dell PowerVault 745N NAS device which acts as the main file server. Its running 32bit Windows 2003 Storage Server SP2 with 3GB RAM. The server holds around 60 users HOME folders, which are mapped via AD. The office clients are a mix of XP SP3, Vista and Windows 7. Occasionally the server will completely hang when transferring large files. When the hang happens the console becomes unresponsive with only the mouse active and blank wallpaper. Sometimes stopping the copy frees the server, sometimes not. The hanging can last around 20 minutes. During this time other servers also become unresponsive with blank wallpaper at the console. If you do manage to get onto another server the taskbar and run commands are unresponsive. This also transcends to the client computers sometimes with explorer crashing. I'm guessing this is due to the HOME folder mapping. Eventually the NAS server with free up and everything will be back to normal. The server is configured as follows: PERC 4/DC DATA 2 - 12 SCSI HDD - RAID5 SHADOWCOPY 2 SCSI HDD - RAID1 CERC SATA DATA 11 4 SATA HDD - RAID5 OS 4 SATA HDD - RAID5 All the drivers and firmware is up to date. I've been through all the diagnostics with Dell and the hardware has come up clean including full HDD tests on the arrays. The server has NOD32 installed as the AV, but the hanging happens when it is uninstalled. There are no errors in the event log when this happens and we don't have any errors logged on any of our ProCurve switches. DNS is fine on the domain and AD from what I can tell is running happily. There are no DFS or NFS shares setup either. All the shares are standard Windows. I've unchecked the allow the computer to turn off this device to save power box under Power Management on the NIC. "Set Link Speed and Duplex to Auto-negotiate 1000 " Increased Receive Descriptors buffer from 256 to 352 (reserves more CPU resource for handling data) I've run network traces using network monitor and have found the following: 417 8.078125 {SMB:192, NbtSS:25, TCP:24, IPv4:23} 192.168.2.244 192.168.5.35 SMB SMB:R; Nt Create Andx - NT Status: System - Error, Code = (52) STATUS_OBJECT_NAME_NOT_FOUND I've tried different cabling; NICs and switch ports all with the same result. Transferring files from other servers on the domain is fine. All I haven't done is run CHKDSK on the drives to look for any file system errors. On the Vista clients I have also run netsh interface tcp set global autotuning=disabled with no result. Could it be that the server has a faulty drive or that the I/O is too much for it to handle? Any ideas why would the hang cause issues with the other servers on the LAN? Many Thanks.

    Read the article

  • Ubuntu hardware wireless switch has no effect after suspend and 13.10 upgrade

    - by blaineh
    I'm posting this on SU after it stalled on askubuntu. I hope someone here can help! If you'd prefer to answer on AU itself, here's the link: http://askubuntu.com/questions/365177/hardware-wireless-switch-has-no-effect-after-suspend-and-13-10-upgrade Wireless works fine after a reboot, but after a suspend the hardware switch (for my laptop this is f12) has no effect on the wireless, it is just permanently off, and shows that it is with a red LED. My rfkill list all reads: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Any combination with rfkill <un>block wifi doesn't work, although one time first blocking then unblocking actually turned it on again. sudo lshw -C network reads: *-network DISABLED description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:65:2e:3f width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.11.0-12-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:90100000-9010ffff *-network DISABLED description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 02 serial: c8:0a:a9:89:b4:30 size: 10Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:42 ioport:2000(size=256) memory:90010000-90010fff memory:90000000-9000ffff memory:90020000-9002ffff Also, adding a /etc/pm/sleep.d/brcm.sh file as recommended here simply prevents the laptop from suspending at all, which of course is no good. This question has an answer urging to install the original driver, but it wasn't an "accepted answer" so I'd rather not take a chance on it. Also I'll admit I'm a bit lost on that and would like help doing so with the specific information I've given. I would be happy to provide more information, so long as you're willing to help me find it for you! This is a very annoying bug. I have a Compaq Presario CQ62. Edit. Output of lspci | grep Network: 02:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Edit. This morning, I had had the laptop suspended all night, and then when I tried to awake it, it simply wouldn't. It would try, and then it would sleep again (I guess it felt a little bit like me! </badjoke>). Is it possible these problems are related? Edit. I don't have enough reputation on SU proper to post links to pastebins and other questions I've tried, so I'm putting them in comments, and of course they're available in the original question.

    Read the article

  • Can only bring up one of two interfaces

    - by mstaessen
    I'm having a bizarre issue with my HP Proliant DL 360 G4p server. It has two gigabit ethernet interfaces but I can bring up only one of them. This is starting to freak me out and that's why I turned here. I'm running the x64 ubuntu 11.10 server edition. lshw -c network shows that the second interface is disabled. I have no idea why ans how to enable it. $ sudo lshw -c network *-network:0 description: Ethernet interface product: NetXtreme BCM5704 Gigabit Ethernet vendor: Broadcom Corporation physical id: 2 bus info: pci@0000:02:02.0 logical name: eth0 version: 10 serial: 00:18:71:e3:6d:26 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 66MHz capabilities: pcix pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 duplex=full firmware=5704-v3.27b, ASFIPMIc v2.36 ip=10.48.8.x latency=64 link=yes mingnt=64 multicast=yes port=twisted pair speed=100Mbit/s resources: irq:25 memory:fdf70000-fdf7ffff *-network:1 DISABLED description: Ethernet interface product: NetXtreme BCM5704 Gigabit Ethernet vendor: Broadcom Corporation physical id: 2.1 bus info: pci@0000:02:02.1 logical name: eth1 version: 10 serial: 00:18:71:e3:6d:25 capacity: 1Gbit/s width: 64 bits clock: 66MHz capabilities: pcix pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.119 firmware=5704-v3.27b latency=64 link=no mingnt=64 multicast=yes port=twisted pair resources: irq:26 memory:fdf60000-fdf6ffff If I try to ifup eth1, then I get $ sudo ifup eth1 Ignoring unknown interface eth1=eth1. I figured that's what happens when there is no eth1 listed in /etc/network/interfaces. But when I add the configuration for eth1, I still can't ifup. $ sudo ifup eth1 RTNETLINK answers: File exists Failed to bring up eth1. I've also tried ifconfig eth1 up but without any result. For clarity, I have added a masked version of /etc/network/interfaces. I don't think it is the cause of the problem though. $ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.48.8.x netmask 255.255.255.y network 10.48.8.z broadcast 10.48.8.t gateway 10.48.8.u auto eth1 iface eth1 inet static address 193.190.253.x netmask 255.255.255.y network 193.190.253.z broadcast 193.190.253.t gateway 193.190.253.u I really need some help fixing this. It's driving me crazy. Thanks.

    Read the article

  • Network unreachable on Ubuntu guest after trying to set up a host only network on Virtualbox

    - by gkb0986
    I have a Mac OS X host and a bunch of guests including Ubuntu and Arch Linux. I was trying to set up a host-only network at eth1 to let me ssh into the system. But now eth0 isn't working properly either. Ubuntu can no longer connect to remote hosts or browse the internet. It tells me that the network is unreachable. What's gone wrong here? I've included some diagnostics below. $ifconfig lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:10968 errors:0 dropped:0 overruns:0 frame:0 TX packets:10968 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:897264 (897.2 KB) TX bytes:897264 (897.2 KB) Other diagnostic commands and the output: $sudo lspci -n 00:00.0 0600: 8086:1237 (rev 02) 00:01.0 0601: 8086:7000 00:01.1 0101: 8086:7111 (rev 01) 00:02.0 0300: 80ee:beef 00:03.0 0200: 8086:100e (rev 02) 00:04.0 0880: 80ee:cafe 00:05.0 0401: 8086:2415 (rev 01) 00:06.0 0C03: 106B:003F 00:07.0 0680: 8086:7113 (REV 08) 00:0D.0 0106: 8086:2829 (REV 02) $sudo lshw -c network *-network DISABLED description: Ethernet interface product: 82540EM Gigabit Ethernet Controller vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 logical name: eth0 version: 02 serial: 08:00:27:7d:22:df size: 1Gbit/s capacity: 1Gbit/s width: 32 bits clock: 66MHz capabilities: pm pcix bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.21-k8-NAPI duplex=full firmware=N/A latency=64 link=no mingnt=255 multicast=yes port=twisted pair speed=1Gbit/s resources: irq:19 memory:f0000000-f001ffff ioport:d010(size=8) $lsmod Module Size Used by nls_utf8 12557 1 isofs 40257 1 vboxsf 43743 2 vesafb 13844 1 snd_intel8x0 38570 2 snd_ac97_codec 134869 1 snd_intel8x0 ac97_bus 12730 1 snd_ac97_codec snd_pcm 97275 2 snd_intel8x0,snd_ac97_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi rfcomm 47604 0 snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event bnep 18281 2 bluetooth 180113 10 rfcomm,bnep ppdev 17113 0 psmouse 97519 0 snd_timer 29990 2 snd_pcm,snd_seq joydev 17693 0 snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq vboxvideo 12622 1 serio_raw 13211 0 snd 79041 11 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd vboxguest 235498 7 vboxsf parport_pc 32866 0 drm 241971 2 vboxvideo i2c_piix4 13301 0 snd_page_alloc 18529 2 snd_intel8x0,snd_pcm mac_hid 13253 0 lp 17799 0 parport 46562 3 ppdev,parport_pc,lp usbhid 47238 0 hid 99636 1 usbhid e1000 108589 0

    Read the article

  • SQL 2008 SP2 RsClientPrint ActiveX - "Unable to load client print control"

    - by Miles
    We recently updated our SQL 2008 server to use SP 2 and its causing a few headaches. We use SSRS on this server and when a client tries to print a report by the built-in print function, we're needing to download the RsClientPrint ActiveX control from the server from the client gets the following error Unable to load client print control. We have about 700 computers that are needing this fixed and I've followed the instructions found on the following URL: http://www.kodyaz.com/articles/client-side-printing-silent-deployment-of-rsclientPrint.aspx We have two issues: Most of the users who will be using this ActiveX control are not local administrators so they will not be able to install the control themselves Since there are so many computers, this has to be done silently behind the scenes run by a local admin account After following the information from the link above, we're able to put the files in the C:\Windows\System32 folder and register the DLL but we still get the same problem. The only small thing I've noticed is that in the HTML for the report page, everything that references a version is referencing version 2007.100.4000.00 and the version of the DLL that I pulled from the report server is 2007.100.1600.22. Also, for some clients that are local administrators, they are prompted every time to install the ActiveX control when they click print. This works successfully but we can't have the user asked if they want to install the same control every time they need to print.

    Read the article

  • Create SAMBA node trust relationship to Windows 2003 PDC server

    - by Rod Regier
    I am having problems creating a trust relationship between an OpenVMS/IA64 node running V/IA64 8.3-1H1, TCPIP 5.6 ECO 5, CIFS 1.1 ECO1 PS11 (SAMBA 3.0.28a) and Windows 2003 server running as a PDC. I do have two other OpenVMS/Alpha nodes running V/A 8.3, TCPIP 5.6 ECO 4, CIS 1.1 ECO1 PS10 (SAMBA 3.0.28a) with working trust relationships to the same Windows 2003 server. Looking for assistance in resolving the trust "handshake". \\ Details from failing node. Unless otherwise noted, corresponding files on working nodes are similar or identical. SMB.CONF extract: [global] server string = Samba %v running on %h (OpenVMS) workgroup = WILMA netbios name = %h security = DOMAIN encrypt passwords = Yes name resolve order = lmhosts host wins bcast Password server = * log file = /samba$log/log.%m printcap name = /sys$manager/ucx$printcap.dat guest account = DYMAX print command = print %f/queue=%p/delete/passall/name="""""%s""""" lprm command = delete/entry=%j map archive = No printing = OpenVMS net rpc testjoin [2010/08/13 16:09:28, 0] SAMBA$SRC:[SOURCE.RPC_CLIENT]CLI_PIPE.C;1:(2443) get_schannel_session_key: could not fetch trust account password for domain 'WILMA' [2010/08/13 16:09:28, 0] SAMBA$SRC:[SOURCE.UTILS]NET_RPC_JOIN.C;1:(72) net_rpc_join_ok: failed to get schannel session key from server W2K3AD2 for domain WILMA. Error was NT_STATUS_CANT_ACCESS_DOMAIN_I NFO Join to domain 'WILMA' is not valid net rpc join "-Uaccount%password" tdb_open_isam: error verifying status of file SAMBA$ROOT:[PRIVATE]secrets.tdb tdb_open_isam: errno value = 1 [2010/08/13 16:21:13, 0] SAMBA$SRC:[SOURCE.PASSDB]SECRETS.C;1:(72) Failed to open /SAMBA$ROOT/PRIVATE/secrets.tdb [2010/08/13 16:21:13, 0] SAMBA$SRC:[SOURCE.UTILS]NET_RPC.C;1:(322) error storing domain sid for WILMA tdb_open_isam: error verifying status of file SAMBA$ROOT:[PRIVATE]secrets.tdb tdb_open_isam: errno value = 1 [2010/08/13 16:21:13, 0] SAMBA$SRC:[SOURCE.PASSDB]SECRETS.C;1:(72) Failed to open /SAMBA$ROOT/PRIVATE/secrets.tdb [2010/08/13 16:21:13, 0] SAMBA$SRC:[SOURCE.UTILS]NET_RPC_JOIN.C;1:(409) error storing domain sid for WILMA Unable to join domain WILMA. \\ Example from other node: net rpc testjoin Join to 'WILMA' is OK

    Read the article

  • Configuration for a two machine ESXi cluster using VSA to present local storage to VMs

    - by MDMarra
    I'm designing a little vSphere 5 cluster for one of our remote sites. We have some IBM x3650s that have 6x 300GB 10K RPM drives in them, along with dual quad core CPUs and 24GB RAM. Because we use HP P4500 G2s at our primary site, we have licenses available for HP P4000 VSAs. I thought that this would be the perfect opportunity to use them. Below is a basic drawing of what I want to accomplish: I want to run a P4000 VSA on each server and run them in a Network RAID-10 (Lefthand speak for network mirroring, think of it as RAID 1 across nodes or as an active/active storage cluster). I will then present this storage to guests that will run on this mini-cluster. It will be managed by a vCenter Server on our main site. All connections will be GbE with two dedicated to storage. Management and Data will share a pair of connections, since I don't expect there to be high load. These servers are just there to provide directory services, dhcp, printing, etc. Does anyone see anything potentially wrong with this approach? Is this the best way to do this without adding additional dedicated storage heads? Are there any pitfalls in this design, besides the lack of dedicated Data/Mgmt interfaces?

    Read the article

  • Parallel port blocking

    - by asalamon74
    I have a legacy Java program which handles a special card printer by sending binary data to the LPT1 port (no printer driver is involved, the Java program creates the binary stream). The program was working correctly with the client's old computer. The Java program sent all the bytes to the printer and after sending the last byte the program was not blocked. It took an other minute to finish the card printing, but the user was able to continue the work with the program. After changing the client's computer (but not the printer, or the Java program), the program does not finish the task till the card is ready, it is blocked until the last second. It seems to me that LPT1 has a different behavior now than was before. Is it possible to change this in Windows? I've checked BIOS for parallel port settings: The parallel port is set to EPP+ECP (but also tried the other two options: Bidirectional, Output only). Maybe some kind of parallel port buffer is too small? How can I increase it?

    Read the article

  • puppetca never returns anything

    - by mrisher
    Hi: I'm trying to configure Puppet on Ubuntu, and strangely I am never able to generate a certificate because my server never shows any pending certificate requests. Put differently, on the server I am running puppetmasterd and on the client I am able to connect to the server, but the client continues printing notice: Did not receive certificate warning: peer certificate won't be verified in this SSL session and yet the server never sees the request mrisher@lab2$ puppetca --list [nothing shows up] mrisher@lab2$ puppetca --sign clientname.domain.com clientname.domain.com err: Could not call sign: Could not find certificate request for clientname.domain.com Edit: There was a suggestion that autosign was happening, but that does not seem to be it. There is no autosign.conf file, and when I run puppetmasterd --no-daemonize -d -v I receive the following output: info: Could not find certificate for 'clientname.domain.com' every time the client says notice: Did not receive certificate I checked the certs on the server and there don't seem to be any: mrisher@lab2:~$ puppetca --list --all mrisher@lab2:~$ sudo puppetca --list --all + lab2.domain.com // this is the server (master) mrisher@lab2:~$ sudo puppetca --list [blank line] mrisher@lab2:~$ Note: This is mostly running the default install from Ubuntu, if that gives any leads. Thanks for any help out there.

    Read the article

  • Terminal server performance over high latency links

    - by holz
    Our datacenter and head office is currently in Brisbane, Australia, and we have a branch office in the UK. We have a private WAN with a 768k link to our UK office and the latency is at about 350ms. The terminal server performance is reeeeealy bad. Applications that don't have too much animation or any images seem to be okay. But as soon as they do, the session is almost unusable. Powerpoint and internet explorer are good examples of apps that make it run slow. And if there is an image in your email signature, outlook will hang for about 10 seconds each time a new line is inserted, while the image gets moved down a few pixels. We are currently running server 2003. I have tried Server 2008 R2 RDS, and also a third party solution called Blaze by a company called Ericom, but it is still not too much better. We currently have a 5 levels dynamic class of service with the priority in the following order. VoIP Video Terminal Services Printing Everything else When testing the terminal server performance, the link monitored using net-flows, and have plenty we of bandwidth available, so I believe that it is a latency issue rather than bandwidth. Is there anything that can be done to improve performance. Would citrix help at all?

    Read the article

  • MacPorts pHash not showing up in Python

    - by Nitzan Wilnai
    I am having a problem where python does not show pHash installed even though I installed it using macports. I made sure I am using the MacPorts version of Python by doing: sudo port select --set python python27 I then installed pHash by doing: sudo port install pHash. It installed without any errors. When I call help('modules'), I do not see pHash listed among the installed packages. Any ideas on why python is not seeing the pHash install by MacPorts? Calling port select --list python shows the following: Available versions for python: none python25-apple python26-apple python27 (active) python27-apple Printing out sys.path outputs the following: (reformatted to make it easier to read here) ['/Library/Python/2.7/site-packages/boto-2.9.9-py2.7.egg', '/Library/Python/2.7/site-packages/setuptools-0.9.8-py2.7.egg', '/Library/Python/2.7/site-packages/pip-1.4.1-py2.7.egg', '/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python27.zip', '/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7', '/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/plat-darwin', '/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/plat-mac', '/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/plat-mac/lib-scriptpackages', '/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/lib-tk', '/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/lib-old', '/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/lib-dynload', '/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages', '/Library/Python/2.7/site-packages'] Can anyone help? Thanks.

    Read the article

  • Debugging Samba/CUPS printer sharing with Windows

    - by mrdrbob
    I've got a HP Deskjet hooked up to a Slackware 12.2 box. I've got CUPS set up and can print a test page from the box just fine. I've also got Samba set up and have a couple file shares that work fine. I'm trying to share that HP Deskjet out via Samba, but I can't get it to show up in any Windows system. I see the server and its file shares in Windows networking, but when I open the Printers, no printer shows up. Running net view \\servername from the command line lists the file shares, but no printers. Here's the pertinent part of my smb.conf, if that helps: [global] workgroup = HOMENET security = share hosts allow = 192.168.1. 192.168.2. 127. load printers = yes printcap name = cups printing = cups log file = /var/log/samba.%m max log size = 50 [printers] comment = All Printers path = /var/spool/samba browseable = no public = yes writable = no printable = yes guest only = yes Can anyone give me some pointers as to where to start looking for potential causes? Update: Running testparm shows no errors. Here's the output (minus the file shares): [global] workgroup = HOMENET security = SHARE log file = /var/log/samba.%m max log size = 50 printcap name = cups hosts allow = 192.168.1., 192.168.2., 127. [printers] comment = All Printers path = /var/spool/samba guest only = Yes guest ok = Yes printable = Yes browseable = No

    Read the article

  • Samba server NETBIOS name not resolving, WINS support not working

    - by Eric
    When I try to connect to my CentOS 6.2 x86_64 server's samba shares using address \\REPO (NETBIOS name of REPO), it times out and shows an error; if I do so directly via IP, it works fine. Furthermore, my server does not work correctly as a WINS server despite my samba settings being correct for it (see below for details). If I stop the iptables service, things work properly. I'm using this page as a reference for which ports to use: http://www.samba.org/samba/docs/server_security.html Specifically: UDP/137 - used by nmbd UDP/138 - used by nmbd TCP/139 - used by smbd TCP/445 - used by smbd I really really really want to keep the secure iptables design I have below but just fix this particular problem. SMB.CONF [global] netbios name = REPO workgroup = AWESOME security = user encrypt passwords = yes # Use the native linux password database #passdb backend = tdbsam # Be a WINS server wins support = yes # Make this server a master browser local master = yes preferred master = yes os level = 65 # Disable print support load printers = no printing = bsd printcap name = /dev/null disable spoolss = yes # Restrict who can access the shares hosts allow = 127.0.0. 10.1.1. [public] path = /mnt/repo/public create mode = 0640 directory mode = 0750 writable = yes valid users = mangs repoman IPTABLES CONFIGURE SCRIPT # Remove all existing rules iptables -F # Set default chain policies iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP # Allow incoming SSH iptables -A INPUT -i eth0 -p tcp --dport 22222 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22222 -m state --state ESTABLISHED -j ACCEPT # Allow incoming HTTP #iptables -A INPUT -i eth0 -p tcp --dport 80 -m state --state NEW,ESTABLISHED -j ACCEPT #iptables -A OUTPUT -o eth0 -p tcp --sport 80 -m state --state ESTABLISHED -j ACCEPT # Allow incoming Samba iptables -A INPUT -i eth0 -p udp --dport 137 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 137 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p udp --dport 138 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 138 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport 139 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 139 -m state --state ESTABLISHED -j ACCEPT iptables -A INPUT -i eth0 -p tcp --dport 445 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 445 -m state --state ESTABLISHED -j ACCEPT # Make these rules permanent service iptables save service iptables restart**strong text**

    Read the article

  • eee box "drobpox" server 24/7

    - by microspino
    I'd like to create a mini dropbox and print server on a small soho network of 5 users (all of them use windows XP desktops). The device need to run 24/7 or at least 12/7 (I can accept just workday hours too but the other two options would be better). Dropbox mini server: I mean I will have a 90gb dropbox on every computer on my network LAN syncing with It and the one onto It syncing to the web. Print Server: I have a Samsung A4 small laser printer, a HP500 Designjet Plotter, a Samsung Multifunction Machine (fax/print/scan/copy), a modern HP color A3 Deskjet printer and a HP laserjet A4 color printer. All of them need to be connected to this mini server. Fax/Scan server: since I have the above mentioned fax/print/scan/copy machine I would like to make people use It from/to their computers through the mini server. I thought to a recent EEEBOX machine because I heard good things about ATOM cpus and because It seems that a recent BIOS version could switch It off and on autonomously. I'd like to listen some advice from You. Best of all would be: - If You have something similar running for a long time - If You disagree with this hardware choice and If You would suggest some other device. - If You see any issues with my printing setup - Anything else ;) My budget is from Zero (using right sw to build something on top on a old PC) to 500€ max.

    Read the article

  • RHEL 5.3 Kickstart - How specify location of individual package in Workstation folder?

    - by Ed
    I keep getting "package does not exist" errors during the install. I made a kickstart ISO to create an unattended install of a RHEL 5.3 build machine for C++ software releases. It pulls the kickstart config file from our internal web server. This is handy; it makes it easy to test and modify without having to make a new ISO. And I plan to check it in to version control if I can get it working. Anyway, the rpm packages are located in two folders on the disk; Client and Workstation. The packages install fine for the ones that are physically located under the Client folder. It cannot find those under the Workstation folder such as as doxygen and subversion complaining that packages do not exist. Is there a way to specify the individual package location? # ----------------------------------------------------------------------------- # P A C K A G E S # ----------------------------------------------------------------------------- %packages @gnome-desktop @core @base @base-x @printing @development-tools emacs kexec-tools fipscheck xorg-x11-server-Xnest xorg-x11-server-Xvfb #Packages Located in Workstation Folder *** Install can not find any of these ?? bison doxygen gcc-c++ subversion zlib-devel freetype-devel libxml2-devel Thanks in advance, -Ed

    Read the article

  • How to connect to a computer that is in Sleep mode over the internet

    - by Gerhard Weiss
    How to connect to a computer that is in Sleep mode over the internet? I am using LogMeIn to connect to another computer offsite. I just installed Windows 7 RC on that system and found that the Sleep mode actually works. Currently LogMeIn does not connect when the system is in Sleep mode or Hibernate mode (that is what their error message displays when you try). Is there a way to get LogMeIn to connect to a system in Sleep mode? Is there other software that gives simliar LogMeIn functionallity (like RDP, etc.) that could be used on Windows 7 instead. I just use LMI for connecting and nothing else (no printing or file transfers). A Non-expensive options (such as free) would be better. I have seen web sites mentioning "Wake on LAN". Does anyone have some good links on how to set this up to be accessed over the internet? Edited: It looks like LogMeIn BETA might be the solution. https://beta.logmein.com/welcome/nextgen/ Has anyone tried this beta yet?

    Read the article

  • Server Bash Line Wrapping Over Text & In Wrong Place

    - by Pez Cuckow
    This is quite a hard problem to explain, when connecting to one of my servers using the bash shell, under any user the line wrapping is broken and has all sorts of problems. Once of which I detail in screenshots below: Other problems I experience include nano getting very confused about which line and or letter I am on, as shown by typing the same message into nano: These problems only occur when connecting as I previously mentioned to one of my servers which runs CentOs. Do you know why this is occurring and what I can do to fix it? On other servers the message works fine! Thanks for your time, Output of requested commands: Server that doesn't work properly: Working server: Could it perhaps be the custom prompt on the non working server? In .bashrc PS1='\e[1;32m\u@\h\e[m:\e[1;34m\w\e[m$ ' Commenting this out appeared to resolve the problem. Google says line wrapping errors can occur if you don't conform to these rules use the \[ escape to begin a sequence of non-printing characters, and the \] escape to signal the end of such a sequence I am not sure where this would fit in on my prompt?

    Read the article

  • (Mac Intel) HP PS driver prints in B&W from Adobe Reader after installing Cannon PS driver

    - by JohnB
    I have a unique problem that leaves me at a loss as to where to start troubleshooting. We have three Macs we use for graphics, two of which are PowerPC and one which is Intel. They are set up to print to an HP 5500dn, but occasionally this printer gets tied up with a massive print job, so I installed the PS driver (iR-PSv1.81MacOSX) for the Cannon C3200 Printer/copier on each of the machines. Both of the PowerPC Macs installed without issue, but the Intel Mac exhibits strange behavior: I've confirmed that while the Cannon driver is installed (whether or not the Cannon is set up for printing in print settings), the HP 5500dn will print in color from Safari, but only prints in black and white from Adobe Reader. The Cannon printer itself has not exhibited any strange behavior As soon as the Cannon driver is uninstalled, the HP 5500dn prints in color from Adobe Reader again. We run a network of Windows PCs, and the 'Mac room' mostly takes care of itself, so we don't have any experienced Mac administrators onsite. The Cannon is capable of Appletalk, but the PS driver seemed easier to work with (and Appletalk is currently disable on the Cannon. I'm not against using the Appletalk compatible drivers, but I would rather use the PS driver if at all possible - I don't want to open up the proverbial can of worms. If someone has any clues or suggestions that would help troubleshoot this problem, I would be grateful. I've already done some googling, but due to the obscure nature of this problem, I haven't been very successful. I don't like to create multiple threads on multiple sites, but I'm posting here due to Chopper3's suggestion on my post on ServerFault (http://serverfault.com/questions/135349/mac-intel-hp-ps-driver-prints-in-bw-from-adobe-reader-after-installing-cannon)

    Read the article

  • Debugging Samba/CUPS printer sharing with Windows

    - by mrdrbob
    I've got a HP Deskjet hooked up to a Slackware 12.2 box. I've got CUPS set up and can print a test page from the box just fine. I've also got Samba set up and have a couple file shares that work fine. I'm trying to share that HP Deskjet out via Samba, but I can't get it to show up in any Windows system. I see the server and its file shares in Windows networking, but when I open the Printers, no printer shows up. Running net view \\servername from the command line lists the file shares, but no printers. Here's the pertinent part of my smb.conf, if that helps: [global] workgroup = HOMENET security = share hosts allow = 192.168.1. 192.168.2. 127. load printers = yes printcap name = cups printing = cups log file = /var/log/samba.%m max log size = 50 [printers] comment = All Printers path = /var/spool/samba browseable = no public = yes writable = no printable = yes guest only = yes Can anyone give me some pointers as to where to start looking for potential causes? Update: Running testparm shows no errors. Here's the output (minus the file shares): [global] workgroup = HOMENET security = SHARE log file = /var/log/samba.%m max log size = 50 printcap name = cups hosts allow = 192.168.1., 192.168.2., 127. [printers] comment = All Printers path = /var/spool/samba guest only = Yes guest ok = Yes printable = Yes browseable = No

    Read the article

  • Win XP error 0x80041003 using GetObject/winmgmts

    - by John Lewis
    My computer is called "neil" and I want to set some values using WMI in vbScript. I adapetd the script below from one supplied by Microsoft. When I run it in my browser I get Error Type: (0x80041003) /dressage/30/pdf2.asp, line 8 I suspect it is some registry/security setting. Any advice? John Lewis FULL SCRIPT call Print_HTML_Page("http://neil/dressage/ascii.asp", "ascii") Sub SetPDFFile(strPDFFile) Const HKEY_LOCAL_MACHINE = &H80000002 strKeyPath = "SOFTWARE\Dane Prairie Systems\Win2PDF" strComputer = "." Set objReg=GetObject( _ "winmgmts:{impersonationLevel=impersonate}!\\" & _ strComputer & "\root\default:StdRegProv") strValueName = "PDFFileName" objReg.SetExpandedStringValue HKEY_LOCAL_MACHINE,_ strKeyPath,strValueName,strPDFFile End Sub Sub Print_HTML_Page(strPathToPage, strPDFFile) SetPDFFile( strPDFFile ) Set objIE = CreateObject("InternetExplorer.Application") 'From http://www.tek-tips.com/viewthread.cfm?qid=1092473&page=5 On Error Resume Next strPrintStatus = objIE.QueryStatusWB(6) If Err.Number 0 Then MsgBox "Cannot find a printer. Operation aborted." objIE.Quit Set objIE = Nothing Exit Sub End If With objIE .visible=0 .left=200 .top=200 .height=400 .width=400 .menubar=0 .toolbar=1 .statusBar=0 .navigate strPathToPage End With 'Wait until IE has finished loading Do while objIE.busy WScript.Sleep 100 Loop On Error Goto 0 objIE.ExecWB 6,2 'Wait until IE has finished printing WScript.Sleep 2000 objIE.Quit Set objIE = Nothing End Sub

    Read the article

  • another "SSH connect to host github.com port 22: Bad file number"

    - by Mariusz
    Hello. I have a problem with my first-time ssh connection. Yes, I've already done yours guides, already tried your "Dealing with firewalls and proxies" article and the problem is still occuring. I am using Win7 32bit, Windows Firewall is disabled, haven't any third-party firewalls, ESET Nod32 Antivirus is not blocking any ports, I am not using any PROXY (neither local proxy) . Here goes the logs: Ordinary SSH connection try C:\Users\Mariusz>ssh -vvv [email protected] OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug2: ssh_connect: needpriv 0 debug1: Connecting to github.com [207.97.227.239] port 22. debug1: connect to address 207.97.227.239 port 22: Not owner ssh: connect to host github.com port 22: Bad file number NCAT connection try C:\Users\Mariusz>ncat github.com 22 Strange connect error from 207.97.227.239 (10013): No error 10013 = WSAEACCES I think that method called "smart-http-support" won't be usable for me because I haven't created repo yet. I have just GIT INIT locally, and finished at step GIT PUSH, which returns the same: ssh: connect to host github.com port 22: Bad file number fatal: The remote end hung up unexpectedly corkscrew method (first article from yours guide) . While PUTTYing (with pageant in bg), after inputing login - an error is occuring (MessageBox): Disconnected: No supported authentication methods available And in terminal such message is printing out: Server refused our key Key I have generated correctly, using ssh-keygen. I tried not method by editing ~/.ssh/config yet because I had thought that because I haven't PUSHed anything to my remote repo so I won't be able to CLONE anything. Method called ssh-forwarding is not for my, cause it "requires access to an external ssh server" and I haven't any at this time. What else could I do? Thanks in advance for any help. Mariusz.

    Read the article

  • Thin client - cloud machine - to run via iPad, iPhone, most Androids etc

    - by Carl Lindberg
    I'm tired of having a laptop macbook that breaks down or having files that I need to sync via dropbox etc all the time via the machines to different OS installations. It sucks. I want a thin client where I can login on any machine - my iPhone, PC desktop, iPad etc to one running machine. I would like to replace a modernly powerful desktop iMac with a thin client running via my iPad. I will connect the iPad with a keyboard/mouse too so you get the idea. But I want to be able to use some of the Android phones as well (I guess most Android phones today has a good enough performance/resolution etc to run a thin client). Of course it has to be able to have input/output in sound. Printing can be solved by PDF/emailing etc - so no direct communication to the printer ports to USB etc is necessary. Is there such a service today? It should cost somewhere under something like $40/ month. I will run stuff like CPU heavy duty ableton for music production, xCode for making iOS apps, some games etc. And on the thin client also run virtual machines. VM of Ubuntu and Windows.

    Read the article

  • Samba PDC share slow with LDAP backend

    - by hmart
    The scenario I have a SUSE SLES 11.1 SP1 machine as Samba master PDC with LDAP backend. In one share there are Database files for a Client-Server application. I log XP and Windows 7 machines to the local domain (example.local), the login is a little slow but works. In the client computers have an executable which opens, reads and writes the database files from the server share. The Problem When running Samba with LDAP password backend the client application runs VERY SLOW with a maximum transfer rate of 2500 MBit per second. If disable LDAP the client app speed increases 20x, with transfer rate of 50Mbit/sec and running smoothly. I'm doing test with just two users and two machines, so concurrency, or LDAP size shouldn't be the problem here. The suspect LDAP, Smb.conf [global] section configuration. The Question What can I do? I've googled a lot, but still have no answer. Slow smb.conf WITH LDAP [global] workgroup = zmartsoft.local passdb backend = ldapsam:ldap://127.0.0.1 printing = cups printcap name = cups printcap cache time = 750 cups options = raw map to guest = Bad User logon path = \\%L\profiles\.msprofile logon home = \\%L\%U\.9xprofile logon drive = P: usershare allow guests = Yes add machine script = /usr/sbin/useradd -c Machine -d /var/lib/nobody -s /bin/false %m$ domain logons = Yes domain master = Yes local master = Yes netbios name = server os level = 65 preferred master = Yes security = user wins support = Yes idmap backend = ldap:ldap://127.0.0.1 ldap admin dn = cn=Administrator,dc=zmartsoft,dc=local ldap group suffix = ou=Groups ldap idmap suffix = ou=Idmap ldap machine suffix = ou=Machines ldap passwd sync = Yes ldap ssl = Off ldap suffix = dc=zmartsoft,dc=local ldap user suffix = ou=Users

    Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >