Search Results

Search found 2436 results on 98 pages for 'verify'.

Page 81/98 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

• Why can’t I create a database in an empty ASP MVC 2 project using Project->Add->New Item->SQL Server

  - by Dr Dork

  I'm diving head first into ASP MVC and am playing around with creating and manipulating a database. I did a search and found this tutorial for creating a database, however when I follow it, I get this error right at the start when trying to add a new database to my fresh, empty ASP MVC 2 project... A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) The only requirement the tutorial mentioned was SQL Server Express, but when I went to download it, it said it was already installed. I'm assuming it was part of the VS 2010 RC I installed and am running. So I don't know what else I need if I am missing something. This is all new to me, so I'm sure I'm missing something obvious here and after I'm done posting this question, I plan to do some more research into the topic of databases and how they work with ASP MVC. In the meantime, I was you could help me answer a couple high level questions... What am I missing/forgetting to do that is causing this error? Any suggestions for good resources/tutorials that focus on using databases with ASP MVC? I've done a lot of database programming in the past, so I'm familiar with the concepts of relational databases and the SQL language. I wish I could find a good resource for learning how to work with them in an ASP dev environment, as well as a good breakdown of all the related technologies used for working with them (i.e. LINQ to SQL). Thanks so much in advance for all your help! I'm going to start researching these questions right now.

  Read the article

• find, excluding dir, not descending into dir, AND using maxdepth and mindepth

  - by user1680819

  This is RHEL 5.6 and GNU find 4.2.27. I am trying to exclude a directory from find, and want to make sure that directory isn't descended into. I've seen plenty of posts saying -prune will do this - and it does. I can run this command: find . -type d -name "./.snapshot*" -prune -o -print and it works. I run it through strace and verify it is NOT descending into .snapshot. I also want to find directories ONLY at a certain level. I can use mindepth and maxdepth to do this: find . -maxdepth 8 -mindepth 8 -type d and it gives me all the dirs 8 levels down, including what's in .snapshot. If I combine the prune and mindepth and maxdepth options: find . -maxdepth 8 -mindepth 8 -type d \( -path "./.snapshot/*" -prune -o -print \) the output is right - I see all the dirs 8 levels down except for what's in .snapshot, but if I run that find through strace, I see that .snapshot is still being descended into - to levels 1 through 8. I've tried a variety of different combinations, moving the precedence parens around, reording expression components - everything that yields the right output still descends into .snapshot. I see in the man page that -prune doesn't work with -depth, but doesn't say anything about mindepth and maxdepth. Can anyone offer any advice? Thanks... Bill

  Read the article

• The type or namespace name 'WebControls' could not be found (are you missing a using directive or an assembly reference?)

  - by user1467175

  I encountered this error: The type or namespace name 'WebControls' could not be found (are you missing a using directive or an assembly reference?) Source Error: Line 28: Login Login1 = (WebControls.Login)LoginView1.FindControl("Login1"); // here the error code Line 29: TextBox UserName = (TextBox)Login1.FindControl("UserName"); Line 30: TextBox FailureText = (TextBox)Login1.FindControl("FailureText"); I did some research and the solution was to add this into the source code: System.Web.UI.WebControls.Login but I have no idea where this code can be add into. At first I tried putting it as a namespace, but it was wrong. Anyone can tell me where should I place this code at?? EDIT protected void Login1_LoginError(object sender, System.EventArgs e) { //Login Login1 = (WebControls.Login).LoginView1.FindControl("Login1"); Login Login1 = (System.Web.UI.WebControls.Login)LoginView1.FindControl("Login1"); TextBox UserName = (TextBox)Login1.FindControl("UserName"); TextBox FailureText = (TextBox)Login1.FindControl("FailureText"); //There was a problem logging in the user //See if this user exists in the database MembershipUser userInfo = Membership.GetUser(UserName.Text); if (userInfo == null) { //The user entered an invalid username... FailureText.Text = "There is no user in the database with the username " + UserName.Text; } else { //See if the user is locked out or not approved if (!userInfo.IsApproved) { FailureText.Text = "When you created your account you were sent an email with steps to verify your account. You must follow these steps before you can log into the site."; } else if (userInfo.IsLockedOut) { FailureText.Text = "Your account has been locked out because of a maximum number of incorrect login attempts. You will NOT be able to login until you contact a site administrator and have your account unlocked."; } else { //The password was incorrect (don't show anything, the Login control already describes the problem) FailureText.Text = string.Empty; } } }

  Read the article

• Search for values in nested array

  - by dardub

  I have an array as follows array(2) { ["operator"] => array(2) { ["qty"] => int(2) ["id"] => int(251) } ["accessory209"] => array(2) { ["qty"] => int(1) ["id"] => int(209) } ["accessory211"] => array(2) { ["qty"] => int(1) ["id"] => int(211) } } I'm trying to find a way to verify an id value exists within the array and return bool. I'm trying to figure out a quick way that doesn't require creating a loop. Using the in_array function did not work, and I also read that it is quite slow. In the php manual someone recommended using flip_array() and then isset(), but I can't get it to work for a 2-d array. doing something like if($array['accessory']['id'] == 211) would also work for me, but I need to match all keys containing accessory -- not sure how to do that Anyways, I'm spinning in circles, and could use some help. This seems like it should be easy. Thanks.

  Read the article

• Remove file from history completely

  - by Iain

  A colleague has done a few things I told them not to do: forked the origin repo online cloned the fork, added a file that shouldn't have been added to that local repo pushed this to their fork I've then: merged the changes from the fork and found the file I want to remove this from: my local repo the fork their local repo I have a solution for removing something from the history, taken from Remove file from git repository (history). What I need to know is, should my colleague also go through this, and will a subsequent push remove all info from the fork? (I'd like an alternative to just destroying the fork, as I'm not sure my colleague will do this) SOLUTION: This is the shortest way to get rid of the files: check .git/packed-refs - my problem was that I had there a refs/remotes/origin/master line for a remote repository, delete it, otherwise git won't remove those files (optional) git verify-pack -v .git/objects/pack/#{pack-name}.idx | sort -k 3 -n | tail -5 - to check for the largest files (optional) git rev-list --objects --all | grep a0d770a97ff0fac0be1d777b32cc67fe69eb9a98 - to check what files those are git filter-branch --index-filter 'git rm --cached --ignore-unmatch file_names' - to remove the file from all revisions rm -rf .git/refs/original/ - to remove git's backup git reflog expire --all --expire='0 days' - to expire all the loose objects (optional) git fsck --full --unreachable - to check if there are any loose objects git repack -A -d - repacking the pack git prune - to finally remove those objects

  Read the article

• Run SQL Scripts from C# application across domains

  - by Saravanan AR

  To run sql script files from my C# application, I referred this. http://social.msdn.microsoft.com/Forums/en/adodotnetdataproviders/thread/43e8bc3a-1132-453b-b950-09427e970f31 it works perfectly when my machine and DB server are in the same domain. my problem now is, i'm executing this console application from a machine (name: X, user id: abc, domain D1). the SQL server is in another machine (name: Y, domain: D2). I use VPN to connect to machine Y with user id 'abc' and work on SQL in remote desktop. how can i run sql scripts across domains? I use this in a custom activity in my TFS build template as the last step to run the scripts in the target database which is in domain D2. i'm getting this error: "A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)" is it possible to connect to the DB using the admin user ID of machine Y in domain D2?

  Read the article

• Using CSS to create three boxes with dividers and text centered within each box

  - by linnse

  I'm trying to figure out the best way to create a row of three boxes (columns), with dividers between boxes 1 and 2, and boxes 2 and 3. The text would need to be centered within each box. h2 { color: #00ADEF; margin-top:0; margin-bottom:0; font-family:Arial, Helvetica, sans-serif; font-size:20px; font-weight:bold; line-height:23px; } p { margin-top:0; } .3colwrapper { width: 930px; margin: 0 auto; } .colbox { float:left; margin: 10px; width: 210px; background:#DDD; padding:10px 40px; } <div class="3colwrapper"> <div class="colbox"><h2>Step One</h2> <p>Sign up</p> </div> <div class="colbox"><h2>Step Two</h2> <p>Verify</p> </div> <div class="colbox"><h2>Step Three</h2> <p>Participate</p> </div> </div> Here's what I've worked up so far: http://cssdesk.com/YyjAr

  Read the article

• Cryptography for P2P card game

  - by zephyr

  I'm considering writing a computer adaptation of a semi-popular card game. I'd like to make it function without a central server, and I'm trying to come up with a scheme that will make cheating impossible without having to trust the client. The basic problem as I see it is that each player has a several piles of cards (draw deck, current hand and discard deck). It must be impossible for either player to alter the composition of these piles except when allowed by the game rules (ie drawing or discarding cards), nor should players be able to know what is in their or their oppponent's piles. I feel like there should be some way to use something like public-key cryptography to accomplish this, but I keep finding holes in my schemes. Can anyone suggest a protocol or point me to some resources on this topic? [Edit] Ok, so I've been thinking about this a bit more, and here's an idea I've come up with. If you can poke any holes in it please let me know. At shuffle time, a player has a stack of cards whose value is known to them. They take these values, concatenate a random salt to each, then hash them. They record the salts, and pass the hashes to their opponent. The opponent concatenates a salt of their own, hashes again, then shuffles the hashes and passes the deck back to the original player. I believe at this point, the deck has been randomized and neither player can have any knowledge of the values. However, when a card is drawn, the opponent can reveal their salt, allowing the first player to determine what the original value is, and when the card is played the player reveals their own salt, allowing the opponent to verify the card value.

  Read the article

• How can I get size in bytes of an object sent using RMI?

  - by Lucas Batistussi

  I'm implementing a cache server with MongoDB and ConcurrentHashMap java class. When there are available space to put object in memory, it will put at. Otherwise, the object will be saved in a mongodb database. Is allowed that user specify a size limit in memory (this should not exceed heap size limit obviously!) for the memory cache. The clients can use the cache service connecting through RMI. I need to know the size of each object to verify if a new incoming object can be put into memory. I searched over internet and i got this solution to get size: public long getObjectSize(Object o){ try { ByteArrayOutputStream bos = new ByteArrayOutputStream(); ObjectOutputStream oos = new ObjectOutputStream(bos); oos.writeObject(o); oos.close(); return bos.size(); } catch (Exception e) { return Long.MAX_VALUE; } } This solution works very well. But, in terms of memory use doesn't solve my problem. :( If many clients are verifying the object size at same time this will cause stack overflow, right? Well... some people can say: Why you don't get the specific object size and store it in memory and when another object is need to put in memory check the object size? This is not possible because the objects are variable in size. :( Someone can help me? I was thinking in get socket from RMI communication, but I don't know how to do this...

  Read the article

• Rails Functional test assert_select javascript respond_to

  - by Macint

  Hello, I am currently trying to write functional tests for a charging form which gets loaded on to the page via AJAX(jQuery). It loads the form from the charge_form action which returns the consult_form.js.erb view. This all works, but I am having trouble with my testing. In the functional I can go to the action but I cannot use assert_select to find a an element and verify that the form is in fact there. Error: 1) Failure: test_should_create_new_consult(ConsultsControllerTest) [/test/functional/consults_controller_test.rb:8]: Expected at least 1 element matching "h4", found 0. <false> is not true. This is the view. consult_form.js.erb: <div id="charging_form"> <h4>Charging form</h4> <div class="left" id="charge_selection"> <%= select_tag("select_category", options_from_collection_for_select(@categories, :id, :name)) %><br/> ... consults_controller_test.rb: require 'test_helper' class ConsultsControllerTest < ActionController::TestCase def test_should_create_new_consult get_with_user :charge_form, :animal_id => animals(:one), :id => consults(:one), :format => 'js' assert_response :success assert_select 'h4', "Charging form" #can't find h4 end end Is there a problem with using assert_select with types other than html? Thank you for any help!

  Read the article

• Weird CSS behavior... removing a 1px border makes <DIV> move about 20px

  - by John

  I have the following: CSS #pageBody { height: 500px; padding:0; margin:0; /*border: 1px solid #00ff00;*/ } #pageContent { height:460px; margin-left:35px; margin-right:35px; margin-top:30px; margin-bottom:30px; padding:0px 0 0 0; } HTML <div id="pageBody"> <div id="pageContent"> <p> blah blah blah </p> </div> </div> </div> If I uncomment the border line in pageBody, everything fits sweetly... I had the border on to verify things were as expected. But removing the border, pageBody drops down the page about 20px, while pageContent does not appear to move at all. Now this is not the real page, but a subset. If nothing's obvious I can attempt to generate a working minimal sample, but I thought there might be an easy quick answer first. I see the same exact problem in Chrome and IE8, suggesting it's me not the browser. Any tips where to look? I wondered maybe the 1px border was some tipping point making the contents of a div just too big, but changing #pageContent height to e.g 400 makes no difference, other than clipping the bottom off that div.

  Read the article

• FileVersionInfo.GetVersionInfo getting old version of an exe swapped at runtime

  - by Richard

  I have a program executing in c# that is sometimes updated while it is running by swapping the exe to a new one. I want the program to routinely check if it has been updated and if so, restart. I use the following function to do this. public static bool DoINeedToRestart(string exe_name) { Version cur_version = new Version(MainProgram.StartVersion); Version file_version = new Version(GetProductVersion(exe_name)); MessageBox.Show("Comparing cur_version " + cur_version.ToString() + " with " + file_version.ToString()); if (file_version > cur_version) { return true; } return false; } public static string GetProductVersion(string path_name) { FileVersionInfo myFI = FileVersionInfo.GetVersionInfo(path_name); return myFI.FileVersion; } MainProgram.StartVersion is set when the program is started to be the current version using the GetProductVersion(exe_name) exe_name is set to be the name of the executable that is being updated. The problem I have is once the MainProgram.exe file has been updated (I verify this manually by looking at the file properties and checking the file version), the GetProductVersion still returns the old file version and I have no idea why! Any help is greatly appreciated.

  Read the article

• c# getting file version of a swapped exe at runtime

  - by Richard

  I have a program executing in c# that is sometimes updated while it is running by swapping the exe to a new one. I want the program to routinely check if it has been updated and if so, restart. I use the following function to do this. public static bool DoINeedToRestart(string exe_name) { Version cur_version = new Version(MainProgram.StartVersion); Version file_version = new Version(GetProductVersion(exe_name)); MessageBox.Show("Comparing cur_version " + cur_version.ToString() + " with " + file_version.ToString()); if (file_version > cur_version) { return true; } return false; } public static string GetProductVersion(string path_name) { FileVersionInfo myFI = FileVersionInfo.GetVersionInfo(path_name); return myFI.FileVersion; } StartVersion is set when the program is started to be the current version using the GetProductVersion(exe_name). exe_name is set to be the name of the executable that is being updated. The problem I have is once the MainProgram.exe file has been updated (I verify this manually by looking at the file properties and checking the file version), the GetProductVersion still returns the old file version and I have no idea why! Any help is greatly appreciated.

  Read the article

• PHP suddenly failed after IIS update

  - by James Hay

  All my application pools were stopped this morning after I got to work. I can restart them, but when I try to load the website the app pool crashes again. Update: I've looked in the GAC as the error below suggests and it seems that the file is not there. How do I get it back? Update 2: I found a further error in the event log saying The Module name FastCgiModule path C:\WINDOWS\System32\inetsrv\iisfcgi.dll returned an error from registration. The data is the error. So following the information from here http://forums.iis.net/t/1153937.aspx I removed CGI and my sites are working again. This has fixed the initial problem, but now I don't have FastCGI so I'm fairly sure that PHP will no longer be working (I don't have any PHP at the moment to test). Original Post I'm getting this error in the event viewer: IISMANAGER_ERROR_LOADING_PROVIDER_TYPE IIS Manager could not load type 'Web.Management.PHP.PHPProvider, Web.Management.PHP, Version=1.2.0.0, Culture=neutral, PublicKeyToken=8175de49a9aec91d' for module provider 'PHP' that is declared in %windir%\system32\inetsrv\config\administration.config. Verify that the type is correct, and that the assembly that contains the module provider is in the Global Assembly Cache (GAC). Exception:System.IO.FileNotFoundException: Could not load file or assembly 'Web.Management.PHP, Version=1.2.0.0, Culture=neutral, PublicKeyToken=8175de49a9aec91d' or one of its dependencies. The system cannot find the file specified. File name: 'Web.Management.PHP, Version=1.2.0.0, Culture=neutral, PublicKeyToken=8175de49a9aec91d' at System.RuntimeTypeHandle._GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark, Boolean loadTypeFromPartialName) at System.RuntimeTypeHandle.GetTypeByName(String name, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark) at System.RuntimeType.PrivateGetType(String typeName, Boolean throwOnError, Boolean ignoreCase, Boolean reflectionOnly, StackCrawlMark& stackMark) at System.Type.GetType(String typeName, Boolean throwOnError) at Microsoft.Web.Management.Server.AdministrationModuleProvider.GetModuleProvider(String userName, String connectionName) WRN: Assembly binding logging is turned OFF. To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1. Note: There is some performance penalty associated with assembly bind failure logging. To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog]. Process:InetMgr Connection:CT211511\Administrator Everything was working fine last night when I left work, and since they've done the maintenance it's all broken.

  Read the article

• SSL connection errors from Apache

  - by Yang

  I'm running a (self-signed) SSL cert site on Apache/2.2.14 on Ubuntu 10.04, but various browsers are giving errors on half the connection attempts. Just now saw this transient error from Chrome: "Error 126 (net::ERR_SSL_BAD_RECORD_MAC_ALERT): Unknown error." Hit refresh and the problem goes away for a while. wget too: $ wget --no-check-certificate https://dev.foo.com/deps/ --2010-09-08 19:30:26-- https://dev.foo.com/deps/ Resolving dev.foo.com... 184.72.53.220 Connecting to dev.foo.com|184.72.53.220|:443... connected. OpenSSL: error:0407006A:rsa routines:RSA_padding_check_PKCS1_type_1:block type is not 01 OpenSSL: error:04067072:rsa routines:RSA_EAY_PUBLIC_DECRYPT:padding check failed OpenSSL: error:1408D07B:SSL routines:SSL3_GET_KEY_EXCHANGE:bad signature Unable to establish SSL connection. Run it right away again and it works: $ wget --no-check-certificate https://dev.foo.com/deps/ --2010-09-08 19:30:29-- https://dev.foo.com/deps/ Resolving dev.foo.com... 184.72.53.220 Connecting to dev.foo.com|184.72.53.220|:443... connected. WARNING: cannot verify dev.foo.com's certificate, issued by `/CN=dev.foo.com': Self-signed certificate encountered. HTTP request sent, awaiting response... 200 OK Length: 3157 (3.1K) [text/html] Saving to: `index.html' 100%[======================================>] 3,157 --.-K/s in 0s 2010-09-08 19:30:29 (48.6 MB/s) - `index.html' saved [3157/3157] In my sites-enabled/default-ssl: SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key The cert: -----BEGIN CERTIFICATE----- MIIBszCCARwCCQCa0TzNwqLgsTANBgkqhkiG9w0BAQUFADAeMRwwGgYDVQQDExNk ZXYucGFydHlvbmRhdGEuY29tMB4XDTEwMDgyNzA2MzA1N1oXDTIwMDgyNDA2MzA1 N1owHjEcMBoGA1UEAxMTZGV2LnBhcnR5b25kYXRhLmNvbTCBnzANBgkqhkiG9w0B AQEFAAOBjQAwgYkCgYEAzXDEULpCUqIc9hV/ESFapkckR2uoYINA81DvG2aQZ9Ot Q30OwX2ae2CC4bSzJEIVlahU8vjVrWpmpa28NEhQbqh4ywwbl1XDrEVYI6Gkfimf snJhOKyaVrEhlwutYtBjmsz3ZIqwymMPm/6smVcSS5dJIynlSmtltxX6ivPcO8UC AwEAATANBgkqhkiG9w0BAQUFAAOBgQBGxHVkpSSOnZjzuySRepjhAlV/yhe9Fx23 fh12WrjQMEi98B7JEuNSLXDWckUN7O6XRc3RzKmazcGHJqzhn0Ov6gAmAE2XjZ/x VW21xmaLwk+KgYKFJbJJaP3jMSpU7I3aa11wqAkR2Zd4Nkm9N0YXYIzcBdfztTVI Et8mEHBFdg== -----END CERTIFICATE----- The cert is in turn generated via: $ make-ssl-cert generate-default-snakeoil --force-overwrite Apache version. $ apache2 -V Server version: Apache/2.2.14 (Ubuntu) Server built: Apr 13 2010 20:22:19 Server's Module Magic Number: 20051115:23 Server loaded: APR 1.3.8, APR-Util 1.3.9 Compiled using: APR 1.3.8, APR-Util 1.3.9 Architecture: 64-bit Server MPM: Worker threaded: yes (fixed thread count) forked: yes (variable process count) Server compiled with.... -D APACHE_MPM_DIR="server/mpm/worker" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=128 -D HTTPD_ROOT="" -D SUEXEC_BIN="/usr/lib/apache2/suexec" -D DEFAULT_PIDLOG="/var/run/apache2.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="/etc/apache2/mime.types" -D SERVER_CONFIG_FILE="/etc/apache2/apache2.conf" I don't administer the network, hardware, etc. - this is all running on Amazon EC2. I'm not running a load-balancer or anything else in front of the server. I'm making direct TCP connections to that host (AFAIK). Any ideas? Thanks in advance for any help.

  Read the article

• Using Supermicro IPMI behind a Proxy?

  - by Stefan Lasiewski

  This is a SuperMicro server with a X8DT3 motherboard which contains an On-board IPMI BMC. In this case, the BMC is a Winbond WPCM450). I believe many Dell servers use this a similar BMC model. A common practice with IPMI is to isolated it to a private, non-routable network. In our case all IPMI cards are plugged into a private management LAN at 192.168.1.0/24 which has no route to the outside world. If I plug my laptop into the 192.168.1.0/24 network, I can verify that all IPMI features work as expected, including the remote console. I need to access all of the IPMI features from a different network, over some sort of encrypted connection. I tried SSH port forwarding. This works fine for a few servers, however, we have close to 100 of these servers and maintaining a SSH client configuration to forward 6 ports on 100 servers is impractical. So I thought I would try a SOCKS proxy. This works, but it seems that the Remote Console application does not obey my systemwide proxy settings. I setup a SOCKS proxy. Verbose logging allows me to see network activity, and if ports are being forwarded. ssh -v -D 3333 [email protected] I configure my system to use the SOCKS proxy. I confirm that Java is using the SOCKS proxy settings. The SOCKS proxy is working. I connect to the BMC at http://192.168.1.100/ using my webbrowser. I can log in, view the Server Health, power the machine on or off, etc. Since SSH verbose logging is enabled, I can see the progress. Here's where it get's tricky: I click on the "Launch Console" button which downloads a file called jviewer.jnlp. JNLP files are opened with Java Web Start. A Java window opens. The titlebar says says "Redirection Viewer" in the title bar. There are menus for "Video" "Keyboard" "Mouse", etc. This confirms that Java is able to download the application through the proxy, and start the application. 60 seconds later, the application times out and simply says "Error opening video socket". Here's a screenshot. If this worked, I would see a VNC-style window. My SSH logs show no connection attempts to ports 5900/5901. This suggests that the Java application started the VNC application, but that the VNC application ignores the systemwide proxy settings and is thus unable to connect to the remote host. Java seems to obey my systemwide proxy settings, but this VNC application seems to ignore it. Is there any way for me to force this VNC application to use my systemwide proxy settings?

  Read the article

• RDS installation failure on 2012 R2 Server Core VM in Hyper-V Server

  - by Giles

  I'm currently installing a test-bed for my firms Infrastructure replacement. 10 or so Windows/Linux servers will be replaced by 2 physical servers running Hyper-V server. All services (DC, RDS, SQL) will be on Windows 2012 R2 Server Core VMs, Exchange on Server 2012 R2 GUI, and the rest are things like Elastix, MailArchiver etc, which aren't part of the equation thus far. I have installed Hyper-V server on a test box, and sucessfully got two virtual DC's running, SQL 2014 running, and 8.1 which I use for the RSAT tools. When trying to install RDS (The old fashioned kind, not the newer VDI(?) style), I get a failed installation due to the server not being able to reboot. A couple of articles have said not to do it locally, so I've moved on. Sitting at the Powershell prompt on the Domain Controller or SQL server (Both Server Core), I run the following commands: Import-Module RemoteDesktop New-SessionDeployment -ConnectionBroker "AlstersTS.Alsters.local" -SessionHost "AlstersTS.Alsters.local" The installation begins, carries on for 2 or 3 minutes, then I receive the following error message: New-SessionDeployment : Validation failed for the "RD Connection Broker" parameter. AlstersTS.Alsters.local Unable to connect to the server by using WindowsPowerShell remoting. Verify that you can connect to the server. At line:1 char:1 + NewSessionDeployment -ConnectionBroker "AlstersTS.Alsters.local" -SessionHost " ... + + CategoryInfo : NotSpecified: (:) [Write-Error], WriteErrorException + FullyQualifiedErrorID : Microsoft.PowerShell.Commands.WriteErrorException,New-SessionDeployment So far, I have: Triple, triple checked syntax. Tried various other commands, and a script to accomplish the same task. Checked DNS is functioning as it should. Checked to the best of my knowledge that AD is working as it should. Checked that the Network Service has the needed permissions. Created another VM and placed the two roles on different servers. Deleted all VMs, started again with a new domain name (Lather, rinse, repeat) Performed the whole installation on a second physical box running Hyper-V Server Pleaded with it Interestingly, if I perform the installation via a GUI installation, the thing just works! Now I know I could convert this to a Server Core role after installation, but this wouldn't teach me what was wrong in the first instance. I've probably got 10 pages through various Google searches, each page getting a little less relevant. The closest matches seem to have good information, but it doesn't seem to be the fix for my set-up. As a side note, I expected to be able to "tee" or "out-file" the error message into a text file, but couldn't get that to work either, so I've typed in the error message manually. Chaps, any suggestions, from the glaringly obvious, to the long-winded and complex? Thanks!

  Read the article

• SSL connection errors from Apache

  - by Yang

  I'm running a (self-signed) SSL cert site on Apache/2.2.14 on Ubuntu 10.04, but various browsers are giving errors on half the connection attempts. Just now saw this transient error from Chrome: "Error 126 (net::ERR_SSL_BAD_RECORD_MAC_ALERT): Unknown error." Hit refresh and the problem goes away for a while. wget too: $ wget --no-check-certificate https://dev.partyondata.com/deps/ --2010-09-08 19:30:26-- https://dev.partyondata.com/deps/ Resolving dev.partyondata.com... 184.72.53.220 Connecting to dev.partyondata.com|184.72.53.220|:443... connected. OpenSSL: error:0407006A:rsa routines:RSA_padding_check_PKCS1_type_1:block type is not 01 OpenSSL: error:04067072:rsa routines:RSA_EAY_PUBLIC_DECRYPT:padding check failed OpenSSL: error:1408D07B:SSL routines:SSL3_GET_KEY_EXCHANGE:bad signature Unable to establish SSL connection. Run it right away again and it works: $ wget --no-check-certificate https://dev.partyondata.com/deps/ --2010-09-08 19:30:29-- https://dev.partyondata.com/deps/ Resolving dev.partyondata.com... 184.72.53.220 Connecting to dev.partyondata.com|184.72.53.220|:443... connected. WARNING: cannot verify dev.partyondata.com's certificate, issued by `/CN=dev.partyondata.com': Self-signed certificate encountered. HTTP request sent, awaiting response... 200 OK Length: 3157 (3.1K) [text/html] Saving to: `index.html' 100%[======================================>] 3,157 --.-K/s in 0s 2010-09-08 19:30:29 (48.6 MB/s) - `index.html' saved [3157/3157] In my sites-enabled/default-ssl: SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key The cert: -----BEGIN CERTIFICATE----- MIIBszCCARwCCQCa0TzNwqLgsTANBgkqhkiG9w0BAQUFADAeMRwwGgYDVQQDExNk ZXYucGFydHlvbmRhdGEuY29tMB4XDTEwMDgyNzA2MzA1N1oXDTIwMDgyNDA2MzA1 N1owHjEcMBoGA1UEAxMTZGV2LnBhcnR5b25kYXRhLmNvbTCBnzANBgkqhkiG9w0B AQEFAAOBjQAwgYkCgYEAzXDEULpCUqIc9hV/ESFapkckR2uoYINA81DvG2aQZ9Ot Q30OwX2ae2CC4bSzJEIVlahU8vjVrWpmpa28NEhQbqh4ywwbl1XDrEVYI6Gkfimf snJhOKyaVrEhlwutYtBjmsz3ZIqwymMPm/6smVcSS5dJIynlSmtltxX6ivPcO8UC AwEAATANBgkqhkiG9w0BAQUFAAOBgQBGxHVkpSSOnZjzuySRepjhAlV/yhe9Fx23 fh12WrjQMEi98B7JEuNSLXDWckUN7O6XRc3RzKmazcGHJqzhn0Ov6gAmAE2XjZ/x VW21xmaLwk+KgYKFJbJJaP3jMSpU7I3aa11wqAkR2Zd4Nkm9N0YXYIzcBdfztTVI Et8mEHBFdg== -----END CERTIFICATE----- The cert is in turn generated via: $ make-ssl-cert generate-default-snakeoil --force-overwrite Apache version. $ apache2 -V Server version: Apache/2.2.14 (Ubuntu) Server built: Apr 13 2010 20:22:19 Server's Module Magic Number: 20051115:23 Server loaded: APR 1.3.8, APR-Util 1.3.9 Compiled using: APR 1.3.8, APR-Util 1.3.9 Architecture: 64-bit Server MPM: Worker threaded: yes (fixed thread count) forked: yes (variable process count) Server compiled with.... -D APACHE_MPM_DIR="server/mpm/worker" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=128 -D HTTPD_ROOT="" -D SUEXEC_BIN="/usr/lib/apache2/suexec" -D DEFAULT_PIDLOG="/var/run/apache2.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="/etc/apache2/mime.types" -D SERVER_CONFIG_FILE="/etc/apache2/apache2.conf" Any ideas? Thanks in advance for any help.

  Read the article

• Unable to delete a file using bash script

  - by user3719091

  I'm having problems removing a file in a bash script. I saw the other post with the same problem but none of those solutions solved my problem. The bash script is an OP5 surveillance check and it calls an Expect process that saves a temporary file to the local drive which the bash script reads from. Once it has read the file and checked its status I would like to remove the temporary file. I'm pretty new to scripting so my script may not be as optimal as it can be. Either way it does the job except removing the file once it's done. I will post the entire code below: #!/bin/bash #GET FLAGS while getopts H:c:w: option do case "${option}" in H) HOSTADDRESS=${OPTARG};; c) CRITICAL=${OPTARG};; w) WARNING=${OPTARG};; esac done ./expect.vpn.check.sh $HOSTADDRESS #VARIABLES VPNCount=$(grep -o '[0-9]\+' $HOSTADDRESS.op5.vpn.results) # Check if the temporary results file exists if [ -f $HOSTADDRESS.op5.vpn.results ] then # If the file exist, Print "File Found" message echo Temporary results file exist. Analyze results. else # If the file does NOT exist, print "File NOT Found" message and send message to OP5 echo Temporary results file does NOT exist. Unable to analyze. # Exit with status Critical (exit code 2) exit 2 fi if [[ "$VPNCount" > $CRITICAL ]] then # If the amount of tunnels exceeds the critical threshold, echo out a warning message and current threshold and send warning to OP5 echo "The amount of VPN tunnels exceeds the critical threshold - ($VPNCount)" # Exit with status Critical (exit code 2) exit 2 elif [[ "$VPNCount" > $WARNING ]] then # If the amount of tunnels exceeds the warning threshold, echo out a warning message and current threshold and send warning to OP5 echo "The amount of VPN tunnels exceeds the warning threshold - ($VPNCount)" # Exit with status Warning (exit code 1) exit 1 else # The amount of tunnels do not exceed the warning threshold. # Print an OK message echo OK - $VPNCount # Exit with status OK exit 0 fi #Clean up temporary files. rm -f $HOSTADDRESS.op5.vpn.results I have tried the following solutions: Create a separate variable called TempFile that specifies the file. And specify that in the rm command. I tried creating another if statement similar to the one I use to verify that file exist and then rm the filename. I tried adding the complete name of the file (no variables, just plain text of the file) I can: Remove the file using the full name in both a separate script and directly in the CLI. Is there something in my script that locks the file that prevents me from removing it? I'm not sure what to try next. Thanks in advance!

  Read the article

• Basic Auth on DirectoryIndex Only

  - by Brad

  I am trying to configure basic auth for my index file, and only my index file. I have configured it like so: <Files index.htm> Order allow,deny Allow from all AuthType Basic AuthName "Some Auth" AuthUserFile "C:/path/to/my/.htpasswd" Require valid-user </Files> When I visit the page, 401 Authorization Required is returned as expected, but the browser doesn't prompt for the username/password. Some further inspection has revealed that Apache is not sending the WWW-Authenticate header. GET http://myhost/ HTTP/1.1 Host: myhost Connection: keep-alive User-Agent: Mozilla/5.0 (Windows NT 5.1) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.100 Safari/534.30 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Encoding: gzip,deflate,sdch Accept-Language: en-US,en;q=0.8 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 HTTP/1.1 401 Authorization Required Date: Tue, 21 Jun 2011 21:36:48 GMT Server: Apache/2.2.16 (Win32) Content-Length: 401 Keep-Alive: timeout=5, max=100 Connection: Keep-Alive Content-Type: text/html; charset=iso-8859-1 <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> <html><head> <title>401 Authorization Required</title> </head><body> <h1>Authorization Required</h1> <p>This server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials (e.g., bad password), or your browser doesn't understand how to supply the credentials required.</p> </body></html> Why is Apache doing this? How can I configure it to send that header appropriately? It is worth noting that this exact same set of directives work fine if I set them for a whole directory. It is only when I configure them to a directory index that they do not work. This is how I know my .htpasswd and such are fine. I am using Apache 2.2 on Windows. On another note, I found this listed as a bug in Apache 1.3. This leads me to believe that this is actually a configuration problem on my end.

  Read the article

• Can't connect to DeploymentShare$ from PC attempting to MDT, but can other PCs on the network

  - by Moman10

  I am in the process of setting up MDT and have run across a problem. MDT is installed on a Windows 2012 server, MDT version 6.2.5019.0. Using WDS as well. Active Directory domain, the server is up to date and on the network. I boot up the PC, it gets an address from DHCP, pulls down the LiteTouchPE_x64.wim image and goes into the MS Solution Accelerators screen, the Processing Bootstrap Settings box comes up and processes for a couple of seconds, then goes away, it sits there for another minute or so and then gives the error: A connection to the deployment share (\\Acme-MDT\DeploymentShare$) could not be made. Can not reach the DeployRoot. Possible Cause: Network Routing error or Network Configuration Error." I can then retry or cancel. I have seen this error online but so far nothing that helps fix it, but seems to be an issue with the FQDN. I verified that I am getting an IP address and that I can successfully ping the MDT server if I use the FQDN, but can not just by it's A record of Acme-MDT. I tried manually mapping the network share using net use and it works if I use the FQDN, but it fails with an error code 53, "Network path not found" if I just use the A record of Acme-MDT. Here is the net use command I'm using: net use * \\Acme-MDT\DeploymentShare$ /u:Domain\Administrator It gives the error System Error 53, Network path not found (and doesn't prompt for a password), but if I use the FQDN of \\Acme-MDT.domain.com\DeploymentShare$ it works fine to map the drive. I guess the problem is, when it tries to load the image, it is trying to start from \\Acme-MDT\DeploymentShare$ and I need it to start from \\Acme-MDT.domain.com\DeploymentShare$, but not sure how to get it to do that. I've put the fully qualified path in CustomSettings.ini and bootstrap, updated the deployment share, regenerated the boot image and replaced the boot wim in WDS. Or, if someone has an idea as to why it's acting this way and knows a way around it. The end result is what matters! :) I did verify in DNS that Acme-MDT is there, with the proper IP, and I can successfully use the net use command to map this drive from a couple other computers that are already on the network. I am assuming it has something to do with that computer not already being part of the domain, but I'm honestly at a loss as to how to fix it. Any ideas are appreciated, thanks in advance for your help!

  Read the article

• Outlook Anywhere inconsistencies with authentication methods

  - by gravyface

  So I've read this question and attempted just about every other workaround I've found online. Problem seems completely illogical to me, anyways: SBS 2011, vanilla install; haven't touched anything in IIS or Exchange outside of what's been done through the checklist (brand new domain, completely new customer) except to import an existing wildcard certificate for *.example.com (which is valid, Remote Web Workplace and Outlook Web Access work fine). On the two test machines and one production machine running a mixture of Windows XP Pro, Windows 7 and Outlook 2003 through to 2010, I've had no problem saving the password after configuring Outlook Anywhere using the wrong authentication method. I repeat, I have had no issues using the wrong authentication method on these test machines; password saves the first time, no problem, can verify it exists in the credentials manager (Start Run control userpasswords2), close Outlook, reboot, go make a sammie, come back, credentials are still saved. When I say wrong, it's because I was choosing NTLM and Exchange (under Exchange Console Server Configuration Client Access) was set by default to use Basic. On two completely different machines setup by a co-worker, they had (under my guidance) used NTLM as well... except that frustratingly, Outlook would always ask for a password. One machine was Windows XP with Outlook 2010, the other was Windows 7 with Outlook 2003. When these two machines were set to use Basic -- the correct settings -- the option to save was there and now works without issue. Puzzled by how my machines could possibly work with the wrong authentication, I then went into one of them and changed the authentication method to Basic. Now here's where it gets a little crazy: if I go under Outlook and change the authentication to use the correct setting (Basic) it fails to save the password and Outlook prompts every time (without a "remember me" checkbox). I have not had a chance to change it to Basic on the other two machines to see if this is just a fluke or not, but something just isn't right here. My two hunches are either a missing/installed KB Update or perhaps a local security policy. I should add that none of the 5 test machines in the equation here have ever been joined to the domain.

  Read the article

• BAD DC transfering FSMO Roles to ADC

  - by Suleman

  I have a DC (FQDN:server.icmcpk.local) and an ADC (FQDN:file-server.icmcpk.local). Recently my DC is facing a bad sector problem so I changed the Operation Masters to file-server for all five roles. but when ever i turn off the OLD DC the file-server also stops wroking with AD and GPMC further i m also unable to join any other computer to this domain. For Test purpose i also added a new ADC (FQDN:wds-server.icmcpk.local) but no succes with the old DC off i had to turn the old DC on and then joined it. I m attaching the Dcdiags for all three servers. Kindly help me so that i b able to reinstall new HDD and it can go online again. --------------------------------------- Server --------------------------------------- C:\Program Files\Support Tools>dcdiag Domain Controller Diagnosis Performing initial setup: Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\SERVER Starting test: Connectivity ......................... SERVER passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\SERVER Starting test: Replications [Replications Check,SERVER] A recent replication attempt failed: From FILE-SERVER to SERVER Naming Context: DC=ForestDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: DC=ForestDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From FILE-SERVER to SERVER Naming Context: DC=DomainDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: DC=DomainDnsZones,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From FILE-SERVER to SERVER Naming Context: CN=Schema,CN=Configuration,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: CN=Schema,CN=Configuration,DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. [Replications Check,SERVER] A recent replication attempt failed: From WDS-SERVER to SERVER Naming Context: DC=icmcpk,DC=local The replication generated an error (1908): Could not find the domain controller for this domain. The failure occurred at 2012-05-04 14:07:13. The last success occurred at 2012-05-04 13:48:39. 1 failures have occurred since the last success. Kerberos Error. A KDC was not found to authenticate the call. Check that sufficient domain controllers are available. ......................... SERVER passed test Replications Starting test: NCSecDesc ......................... SERVER passed test NCSecDesc Starting test: NetLogons ......................... SERVER passed test NetLogons Starting test: Advertising ......................... SERVER passed test Advertising Starting test: KnowsOfRoleHolders ......................... SERVER passed test KnowsOfRoleHolders Starting test: RidManager ......................... SERVER passed test RidManager Starting test: MachineAccount ......................... SERVER passed test MachineAccount Starting test: Services ......................... SERVER passed test Services Starting test: ObjectsReplicated ......................... SERVER passed test ObjectsReplicated Starting test: frssysvol ......................... SERVER passed test frssysvol Starting test: frsevent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. ......................... SERVER failed test frsevent Starting test: kccevent ......................... SERVER passed test kccevent Starting test: systemlog An Error Event occured. EventID: 0x80001778 Time Generated: 05/04/2012 14:05:39 Event String: The previous system shutdown at 1:26:31 PM on An Error Event occured. EventID: 0x825A0011 Time Generated: 05/04/2012 14:07:45 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:13:40 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:14:25 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:14:25 (Event String could not be retrieved) An Error Event occured. EventID: 0x00000457 Time Generated: 05/04/2012 14:14:38 (Event String could not be retrieved) An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:16:14 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Generate Activation Context failed for An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:16:14 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:16:14 Event String: Generate Activation Context failed for An Error Event occured. EventID: 0x825A0011 Time Generated: 05/04/2012 14:22:57 (Event String could not be retrieved) An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:22:59 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Generate Activation Context failed for An Error Event occured. EventID: 0xC1010020 Time Generated: 05/04/2012 14:22:59 Event String: Dependent Assembly Microsoft.VC80.MFCLOC could An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Resolve Partial Assembly failed for An Error Event occured. EventID: 0xC101003B Time Generated: 05/04/2012 14:22:59 Event String: Generate Activation Context failed for ......................... SERVER failed test systemlog Starting test: VerifyReferences ......................... SERVER passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Running partition tests on : DomainDnsZones Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Running partition tests on : Schema Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Running partition tests on : Configuration Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Running partition tests on : icmcpk Starting test: CrossRefValidation ......................... icmcpk passed test CrossRefValidation Starting test: CheckSDRefDom ......................... icmcpk passed test CheckSDRefDom Running enterprise tests on : icmcpk.local Starting test: Intersite ......................... icmcpk.local passed test Intersite Starting test: FsmoCheck ......................... icmcpk.local passed test FsmoCheck ---------------------- File-Server ---------------------- C:\Users\Administrator.ICMCPK>dcdiag Directory Server Diagnosis Performing initial setup: Trying to find home server... Home Server = FILE-SERVER * Identified AD Forest. Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\FILE-SERVER Starting test: Connectivity ......................... FILE-SERVER passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\FILE-SERVER Starting test: Advertising Warning: DsGetDcName returned information for \\Server.icmcpk.local, when we were trying to reach FILE-SERVER. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... FILE-SERVER failed test Advertising Starting test: FrsEvent ......................... FILE-SERVER passed test FrsEvent Starting test: DFSREvent ......................... FILE-SERVER passed test DFSREvent Starting test: SysVolCheck ......................... FILE-SERVER passed test SysVolCheck Starting test: KccEvent ......................... FILE-SERVER passed test KccEvent Starting test: KnowsOfRoleHolders ......................... FILE-SERVER passed test KnowsOfRoleHolders Starting test: MachineAccount ......................... FILE-SERVER passed test MachineAccount Starting test: NCSecDesc Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=ForestDnsZones,DC=icmcpk,DC=local Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=DomainDnsZones,DC=icmcpk,DC=local ......................... FILE-SERVER failed test NCSecDesc Starting test: NetLogons Unable to connect to the NETLOGON share! (\\FILE-SERVER\netlogon) [FILE-SERVER] An net use or LsaPolicy operation failed with error 67, The network name cannot be found.. ......................... FILE-SERVER failed test NetLogons Starting test: ObjectsReplicated ......................... FILE-SERVER passed test ObjectsReplicated Starting test: Replications ......................... FILE-SERVER passed test Replications Starting test: RidManager ......................... FILE-SERVER passed test RidManager Starting test: Services ......................... FILE-SERVER passed test Services Starting test: SystemLog An Error Event occurred. EventID: 0x00000469 Time Generated: 05/04/2012 14:01:10 Event String: The processing of Group Policy failed because of lack of network con nectivity to a domain controller. This may be a transient condition. A success m essage would be generated once the machine gets connected to the domain controll er and Group Policy has succesfully processed. If you do not see a success messa ge for several hours, then contact your administrator. An Warning Event occurred. EventID: 0x8000A001 Time Generated: 05/04/2012 14:07:11 Event String: The Security System could not establish a secured connection with th e server ldap/icmcpk.local/[email protected]. No authentication protocol was available. An Warning Event occurred. EventID: 0x00000BBC Time Generated: 05/04/2012 14:30:34 Event String: Windows Defender Real-Time Protection agent has detected changes. Mi crosoft recommends you analyze the software that made these changes for potentia l risks. You can use information about how these programs operate to choose whet her to allow them to run or remove them from your computer. Allow changes only if you trust the program or the software publisher. Windows Defender can't undo changes that you allow. An Warning Event occurred. EventID: 0x00000BBC Time Generated: 05/04/2012 14:30:36 Event String: Windows Defender Real-Time Protection agent has detected changes. Mi crosoft recommends you analyze the software that made these changes for potentia l risks. You can use information about how these programs operate to choose whet her to allow them to run or remove them from your computer. Allow changes only if you trust the program or the software publisher. Windows Defender can't undo changes that you allow. ......................... FILE-SERVER failed test SystemLog Starting test: VerifyReferences ......................... FILE-SERVER passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : icmcpk Starting test: CheckSDRefDom ......................... icmcpk passed test CheckSDRefDom Starting test: CrossRefValidation ......................... icmcpk passed test CrossRefValidation Running enterprise tests on : icmcpk.local Starting test: LocatorCheck ......................... icmcpk.local passed test LocatorCheck Starting test: Intersite ......................... icmcpk.local passed test Intersite --------------------- WDS-Server --------------------- C:\Users\Administrator.ICMCPK>dcdiag Directory Server Diagnosis Performing initial setup: Trying to find home server... Home Server = WDS-SERVER * Identified AD Forest. Done gathering initial info. Doing initial required tests Testing server: Default-First-Site-Name\WDS-SERVER Starting test: Connectivity ......................... WDS-SERVER passed test Connectivity Doing primary tests Testing server: Default-First-Site-Name\WDS-SERVER Starting test: Advertising Warning: DsGetDcName returned information for \\Server.icmcpk.local, when we were trying to reach WDS-SERVER. SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... WDS-SERVER failed test Advertising Starting test: FrsEvent There are warning or error events within the last 24 hours after the SYSVOL has been shared. Failing SYSVOL replication problems may cause Group Policy problems. ......................... WDS-SERVER passed test FrsEvent Starting test: DFSREvent ......................... WDS-SERVER passed test DFSREvent Starting test: SysVolCheck ......................... WDS-SERVER passed test SysVolCheck Starting test: KccEvent ......................... WDS-SERVER passed test KccEvent Starting test: KnowsOfRoleHolders ......................... WDS-SERVER passed test KnowsOfRoleHolders Starting test: MachineAccount ......................... WDS-SERVER passed test MachineAccount Starting test: NCSecDesc Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=ForestDnsZones,DC=icmcpk,DC=local Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have Replicating Directory Changes In Filtered Set access rights for the naming context: DC=DomainDnsZones,DC=icmcpk,DC=local ......................... WDS-SERVER failed test NCSecDesc Starting test: NetLogons Unable to connect to the NETLOGON share! (\\WDS-SERVER\netlogon) [WDS-SERVER] An net use or LsaPolicy operation failed with error 67, The network name cannot be found.. ......................... WDS-SERVER failed test NetLogons Starting test: ObjectsReplicated ......................... WDS-SERVER passed test ObjectsReplicated Starting test: Replications ......................... WDS-SERVER passed test Replications Starting test: RidManager ......................... WDS-SERVER passed test RidManager Starting test: Services ......................... WDS-SERVER passed test Services Starting test: SystemLog An Error Event occurred. EventID: 0x0000041E Time Generated: 05/04/2012 14:02:55 Event String: The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name Sysytem (DNS) is configured and working correctly. An Error Event occurred. EventID: 0x0000041E Time Generated: 05/04/2012 14:08:33 Event String: The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name Sysytem (DNS) is configured and working correctly. ......................... WDS-SERVER failed test SystemLog Starting test: VerifyReferences ......................... WDS-SERVER passed test VerifyReferences Running partition tests on : ForestDnsZones Starting test: CheckSDRefDom ......................... ForestDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... ForestDnsZones passed test CrossRefValidation Running partition tests on : DomainDnsZones Starting test: CheckSDRefDom ......................... DomainDnsZones passed test CheckSDRefDom Starting test: CrossRefValidation ......................... DomainDnsZones passed test CrossRefValidation Running partition tests on : Schema Starting test: CheckSDRefDom ......................... Schema passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Schema passed test CrossRefValidation Running partition tests on : Configuration Starting test: CheckSDRefDom ......................... Configuration passed test CheckSDRefDom Starting test: CrossRefValidation ......................... Configuration passed test CrossRefValidation Running partition tests on : icmcpk Starting test: CheckSDRefDom ......................... icmcpk passed test CheckSDRefDom Starting test: CrossRefValidation ......................... icmcpk passed test CrossRefValidation Running enterprise tests on : icmcpk.local Starting test: LocatorCheck ......................... icmcpk.local passed test LocatorCheck Starting test: Intersite ......................... icmcpk.local passed test Intersite

  Read the article

• IIS6 Virtual Directory 500 Error on Remote Share

  - by David

  We have our servers at the server farm in a domain. Let's call it LIVE. Our developer computers live in a completely separate corporate domain, miles and miles away. Let's call it CORP. We have a large central storage unit (unix) that houses images and other media needed by many webservers in the server farm. The IIS application pools run as (let's say) LIVE\MediaUser and use those credentials to connect to a central storage share as a virtual directory, retrieve the images, and serve them as if they were local on each server. The problem is in development. On my development machine. I log in as CORP\MyName. My IIS 6 application pool runs as Network Service. I can't run it as a user from the LIVE domain because my machine isn't (and can not be) joined to that domain. I try to create a virtual directory, point it to the same network directory, click Connect As, uncheck the "Always use the authenticated user's credentials when validating access to the network directory" checkbox so that I can enter the login info, enter the credentails for LIVE\MediaUser, click OK, verify the password, etc. This doesn't work. I get "HTTP Error 500 - Internal server error" from IIS. The IIS log file reports sc-status = 500, sc-substatus = 16, and sc-win32-status = 1326. The documentation says this means "UNC authorization credentials are incorrect" and the Win32 status means "Logon failure: unknown user name or bad password." This would be all and good if it were anywhere close to accurate. I double- and trouble-checked it. Tried multiple known good logins. The IIS manager allows me to view the file tree in its window, it's only the browser that kicks me out. I even tried going to the virtual directory's Directory Security tab, and under Authentication and Access Control, I tried using the same LIVE domain username for the anonymous access credential. No luck. I'm not trying to run any ASP, ASP.NET, or other dynamic anything out of the virtual directory. I just want IIS to be able to load static images, css, and js files. If anyone has some bright ideas I would be most appreciative!

  Read the article

• VMWare-Mount not recognizing virtual disks

  - by user36175

  I have two disks as .vmdk files, and four as .vdi files. I can boot virtual machines on them with Sun xMV VirtualBox, and they work just fine. However, I want to mount them on my local computer so I can read some files off of them without starting a virtual machine. I downloaded the vmware-mount utility, but I get this error, even when mounting .vmdk files, which should be VMWare images... Unable to mount the virtual disk. The disk may be in use by a virtual machine, may not have enough volumes or mounted under another drive letter. If not, verify that the file is a valid virtual disk file. Thinking it's a problem with the utility, I downloaded the SDK and made my own simple program in C to try to mount a disk. It just initializes the API, connects to it, then attempts to open the disk. I get this error, once again claiming it is not a virtual disk: **LOG: DISKLIB-DSCPTR: descriptor above max size: I64u **LOG: DISKLIB-LINK : "f:\programming\VMs\windowstrash.vdi" : failed to open (The file specified is not a virtual disk). **LOG: DISKLIB-CHAIN : "f:\programming\VMs\windowstrash.vdi" : failed to open (The file specified is not a virtual disk). **LOG: DISKLIB-LIB : Failed to open 'f:\programming\VMs\windowstrash.vdi' with flags 0x1e (The file specified is not a virtual disk). ** FAILURE ** : The file specified is not a virtual disk The files are clearly virtual disks, though, since I can actually mount and use them with a virtual machine. I tried detaching them from any VMs and trying again, but I got the same results. Any ideas? Maybe the "descriptor above max size" is a hint? Some more info: the .vmdk disks were created on other computers. I just copied them to mine and created new VMs around them, but they work fine. All the .vdi files were created on my machine. Not sure if that affects anything. Update: WinMount can mount the file.. so the problem seems to be with vmware-mount.

  Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >