Search Results

Search found 18580 results on 744 pages for 'wireless connection'.

Page 81/744 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

• wired connection not being recognised in ubuntu 10.04 lts

  - by arun

  I have windows7 installed on my C drive and ubuntu 10.04 lts on my D drive. When I plud the lan cable (ethernet cable) onto the ethernet card of my laptop, windows7 identifies the network correctly without the need for any manual settings and connects me to the network correctly. Unfortunately, in ubuntu, even after plugging in the cable, nothing happens (on the network side). It is only scanning for wireless networks it seems, and doesnt bother about the wired networks. I tried adding a new wired connection and manually entered the physical address which was displayed when i connected to the network using windows. i entered the phy address, and told it to use auto dhcp and saved the dialog bog in ubuntu network connection. Still there is no change, and ubuntu doesnt seem to recognise anything. please let me know how to work with wired connections using ubuntu, and why my wired cable is not being recognized in ubuntu. thanks. PS: I am pretty new to ubuntu/ linux :)

  Read the article

• How to host an AP or a hotspot?

  - by user1048138

  I'm running Ubuntu 12.04 as a virtual machine on my Mac. Since I am unable to get the virtual machine to have full access to my WiFi card, I bought another USB WiFi card to use. This is my WiFi card. If you are unfamiliar with Virtual machine, as far as I know, since the Ubuntu has its own card now, it shouldn't matter. I have followed these guides with no luck: https://help.ubuntu.com/community/WifiDocs/WirelessAccessPoint http://www.danbishop.org/2011/12/11/using-hostapd-to-add-wireless-access-point-capabilities-to-an-ubuntu-server/ The problem is that the WiFi connection appears on all of the machines that I have in my house: 2 iPhones, Dell machine running Ubuntu and two Macbooks. However the connection times out on all of these machines. Questions: Could this be a driver issue if that same WiFi card can connect to other WiFi points and use its internet Could this be DHCP related? I would think not. It should at least get a 169.X.X.X address? No? Any solutions for me?

  Read the article

• Ethernet Wired Connection Help

  - by user107598

  I have recently installed Ubuntu 12.10 onto my Dell Inspiron N5010 and Ive been all over many forums trying to figure out how I can get my ethernet cable to be recognized so I can set up a wired connection. My Network Card is the Realtek RT8139 and from what Ive gathered the ethernet port driver for it is installed. Whenever I run ifconfig in the terminal it says that eth1 is up and running but no matter how I edit the connection I cannot get it to work. If anyone can help it would be greatly appreciated!

  Read the article

• Static IP breaks Network connection

  - by Pasquale Tedesco

  I am somewhat new to Linux. I am setting up a Web server and installed Ubuntu server 14.04 on an vSphere ESXi 5.5 host. I am connecting perfectly fine to the internet when using DHCP but when I apply my Static settings I loose the ability to connect to websites. Whats weird is I can Ping google.com but if I try wget gooogl.com it hangs at connecting to google.com (google.com):173.194.43.32:80 and I get "failed: connection refused" But if I am set to DHCP the connection resolves perfectly. Thanks # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 #iface eth0 inet dhcp iface eth0 inet static address 10.1.2.25 gateway 10.1.2.2 netmask 255.255.255.0 search tsig.com dns-nameservers 10.1.2.13 10.1.2.30

  Read the article

• How to connect MTS MBlaze

  - by murali_ma

  i have installed ubuntu 11.04 inside the windows xp. i have MTS Mblaze USB Modem. (my service provider is MTS MBlaze,india) i want to use Mblaze into ubuntu so that i did the following steps for make connecting the device. from the task bar->edit connections->mobile broadband->choose country->mts mblaze and ok i give username and password ([email protected] and password MTS. ok now i enable mobile broadband , MTS MBlaze connection1(connection name) from task bar. steps followed from "http://randomshandom.wordpress.com/2010/12/20/how-to-connect-mts-mblaze-device-in-ubuntu-10-10-11-04/#more-3" for the first time it successfully connected and browse the internet. after i restart the system i connect it. it does not connected. it shows Modem network disconnected. i accessed many times and delete the connection and recreated but i does not help me. if i try to connect device i think it the search the network, i saw the wave signal. img Image for showing problem:

  Read the article

• Removing unused profiles from Windows network connections

  - by Shiki

  Can't figure this one out. When you connect to a wireless network (like an ad-hoc), it'll create a networkname 1 connection. After something changes, it makes a networkname 2 connection. And this goes on and on. Now I'm at connection ~23, at the home connection I'm at ~2 and ~5. Is there a way to clean these out? Couldn't find where Win stores such profiles.

  Read the article

• ssh:connection timed out

  - by user1155299

  I am trying the following command on ubuntu ssh [email protected] and I get the following error: ssh: connect to host xx.xx.xxx.xxx port 22: Connection timed out so, I tried the following: telnet xx.xx.xxx.xxx 22xx and I got the following message: Trying xx.xx.xxx.xxx... Connected to xx.xx.xxx.xxx. Escape character is '^]'. SSH-2.0-OpenSSH_5.5 Connection closed by foreign host. Can anyone help me understand what the problem is and how I can fix it.

  Read the article

• Connection make b/w iphone to windows pc-rajay [on hold]

  - by Rajay

  I Need to create connection between ios to windows by using socket programming in ios. I'm trying to to use an application to communicate with Windows via sockets. At the minimum, I'm trying to at least figure out how I can create a connection from the iPhone (maybe using the iPhone to ping the Windows machine?) I'm not really clear on where I need to start. I'm pretty new to iOS development in general, and brand new to socket/network programming. I've tried several tutorials that haven't gotten me far. My goal is: Connect to a server via sockets (the server will be a Windows machine with a service waiting for incoming connections from the iPhone) If possible, I would like to write/build the client piece first, but I have been lost thus far. Hopefully the nice folks in the SO community can lend a hand and point me in the right direction.

  Read the article

• Using Virtualbox Bridge Networking fails connection from Guest OS to Oracle XE running on Host

  - by Licheng

  I am trying to make a JDBC connection from a VirtualBox Ubuntu Guest OS to an Oracle XE database running o Host. However, the connection is refused. Here are the details of my environment: VirtualBox: 4.1.4 Host OS: Windows 7 Guest OS: Ubuntu server 11.4 Networking mode: Bridged network Oracle XE database running on Host Issue: WebLogic server runs on the Ubuntu virtualbox. It attempts to connect to an Oracle XE database running on the Host OS (windows 7) with listening port 1521. On the Guest OS (Ubuntu), I am able to ping the Host computer from the Guest OS. However, when I configured a JDBC data source on the WebLogic server on the Guest OS to connect to the Oracle XE, connection took a long time, and eventually I received an "IO Exception: The Network Adapter could not establish the connection". When I tried "telnet host-ip 1521", no connection was established. With Bridge networking, I can make bi-directional connections between the host and the guest OS (e.g. connection through ssh and ftp). Is there anything I missed in the setup of Bridge networking and the guest/host OS? Note that I was able to make the same connection within a normal networking environment (i.e. not using virtual box). I am not sure whether Bridge networking is a good option for the work described above. Should I use host-only networking mode? If so, any specific configurations I need to perform? I read through the Virtual box document on setting up the host-only network, however, it lacks of details. I followed the procedures described in the manual, and couldn't even connect to the host. Could some experts here enlighten me on this issue? Much appreciated. Licheng

  Read the article

• WPA Connection problem

  - by Renjith G

  hi , I am using hostapd,wireless tools with madwifi for my wireless ap in my board. The WEP, WPA-PSK connections and communications between my board and my desktop PC, WINDOWS XP SP2) (with OLITEC wireless usb)are fine. But when i configured the WPA type, connection established but it is showing the status in the secuirity dialog box "TKIP - Key Absent" Can any one faced this problem?? /renjith g

  Read the article

• 1and1 ssh - connection refused

  - by kitensei

  I'm having troubles connecting through SSH to my 1&1 account. When I try to connect with command userXXX@host -p22 -vv I have the following output: OpenSSH_5.8p1 Debian-7ubuntu1, OpenSSL 1.0.0e 6 Sep 2011 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to mySite.com [ip_here] port 22. debug1: connect to address ip_here port 22: Connection refused Moreover, once I try to connect through SSH and it fails, even the HTTP access is dead, I cannot access the website through explorer anymore :/ please help < I'm running ubuntu 11.10 EDIT: don't know if it can help, here's the .htaccess of the 1and1 server Options +Indexes Satisfy any Order Deny,Allow Allow from 212.227.X.X Deny from all RemoveType .html .gif AuthType Basic AuthName "Access to /logs" AuthUserFile /kunden/homepages/43/d376072470/htpasswd Require user "user_here" and sftp.log: Mar 26 09:21:24 193.251.X USER_HERE Connection from 193.251.X port 51809 Mar 26 09:21:30 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 09:23:39 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 09:23:41 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 09:23:45 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 09:23:57 193.251.X USER_HERE Failed password for USER_HERE from 193.251.X port 51809 ssh2 Mar 26 10:53:36 212.227.X tmp64459736-3228 Connection from 212.227.X port 23275 Mar 26 10:53:36 212.227.X tmp64459736-3228 Accepted password for tmp64459736-3228 from 212.227.X port 23275 ssh2 Mar 26 11:53:37 212.227.X tmp64459736-3228 Connection closed by 212.227.X Mar 26 18:58:17 212.227.X tmp64459736-5363 Connection from 212.227.X port 23353 Mar 26 18:58:17 212.227.X tmp64459736-5363 Accepted password for tmp64459736-5363 from 212.227.X port 23353 ssh2 Mar 26 19:53:36 212.227.X tmp64459736-8525 Connection from 212.227.X port 5166 Mar 26 19:53:36 212.227.X tmp64459736-8525 Accepted password for tmp64459736-8525 from 212.227.X port 5166 ssh2 Mar 26 19:58:17 212.227.X tmp64459736-5363 Connection closed by 212.227.X

  Read the article

• Cannot connect to Open WiFi hotspot created by Android

  - by Bibhas

  I'm trying to share my 3G data connection via WiFi hotspot. I have an open Hotspot running on my phone(Xperia Neo V - MT11i - Android 2.3.4). But I cannot connect to it from my Ubuntu system. Here is the syslog while I try to connect to it - NetworkManager[1077]: <info> Activation (wlan0) starting connection 'TheNeo' NetworkManager[1077]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0] NetworkManager[1077]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager[1077]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started... NetworkManager[1077]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... NetworkManager[1077]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. NetworkManager[1077]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting... NetworkManager[1077]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0] NetworkManager[1077]: <info> Activation (wlan0/wireless): connection 'TheNeo' requires no security. No secrets needed. NetworkManager[1077]: <info> Config: added 'ssid' value 'TheNeo' NetworkManager[1077]: <info> Config: added 'scan_ssid' value '1' NetworkManager[1077]: <info> Config: added 'key_mgmt' value 'NONE' NetworkManager[1077]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete. NetworkManager[1077]: <info> Config: set interface ap_scan to 1 NetworkManager[1077]: <info> (wlan0): supplicant interface state: inactive -> scanning wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) NetworkManager[1077]: <info> (wlan0): supplicant interface state: scanning -> authenticating kernel: [17498.113553] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17498.310138] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17498.510069] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17498.710083] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17504.779927] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17504.976420] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17505.176379] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17505.376314] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17511.478385] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17511.674738] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17511.874655] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17512.074659] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17518.152643] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17518.349064] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17518.549051] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17518.748999] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17524.858896] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17525.055404] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17525.255387] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17525.455254] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17531.589176] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17531.785747] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17531.985724] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17532.185610] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17538.329257] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17538.528003] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17538.728024] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17538.927922] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17545.022036] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17545.218339] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17545.418319] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17545.618206] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out wpa_supplicant[29352]: Trying to authenticate with 5c:b5:24:2f:d1:2f (SSID='TheNeo' freq=2462 MHz) kernel: [17551.724177] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 1/3) kernel: [17551.920685] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 2/3) kernel: [17552.120597] wlan0: direct probe to 5c:b5:24:2f:d1:2f (try 3/3) kernel: [17552.320526] wlan0: direct probe to 5c:b5:24:2f:d1:2f timed out NetworkManager[1077]: <warn> Activation (wlan0/wireless): association took too long, failing activation. NetworkManager[1077]: <info> (wlan0): device state change: config -> failed (reason 'supplicant-timeout') [50 120 11] NetworkManager[1077]: <warn> Activation (wlan0) failed for access point (TheNeo) NetworkManager[1077]: <warn> Activation (wlan0) failed. NetworkManager[1077]: <info> (wlan0): device state change: failed -> disconnected (reason 'none') [120 30 0] NetworkManager[1077]: <info> (wlan0): deactivating device (reason 'none') [0] NetworkManager[1077]: <info> (wlan0): supplicant interface state: authenticating -> disconnected NetworkManager[1077]: <warn> Couldn't disconnect supplicant interface: This interface is not connected. Why is direct probe to 5c:b5:24:2f:d1:2f timed out? Any idea?

  Read the article

• How to direct Ubuntu to use USB connection for Internet

  - by t3ch

  Hi folks, I posted yesterday regarding how to configure easytether on Ubuntu. I followed the steps and everything looks good from the terminal. But I am not able to connect to the Internet. Currently I am connected to a Wireless network, I tried disconnecting to it, in hope to connect to Internet using my phone but with no help. How do I make my notebook use my cell phone's connection. I have attached the snapshot from the terminal.

  Read the article

• How do I disable network connection at prelogin?

  - by ProGNOMmers

  --- This question is related to Ubuntu 12.10, since previous versions did not connect to network before login --- I had a bad boot today: the Ubuntu screen was blocked at startup time, after a green [OK] and a white blinking underscore. In recovery mode I figured out the problem: NetworkManager hung trying to connect to a wireless network that wasn't available anymore, and so I couldn't reach the prelogin level. Anyway: I really don't like that the pc connects to a network before the user logging in. How is it possible to disable it?

  Read the article

• How to use my own connection when using iBatis Data Mapper?

  - by Amitabh

  How can I use my own connection Provider when using iBatis Data Mapper? I have to use UserId and Password of the user performing the db operation in the ConnectionString? E.g. The following ConnectionString has to be modified to insert the userid and password for user performing the db operation. Data Source=TEST;Persist Security Info=True;User ID={userID};Password={password} How can this be handled in iBatis DataMapper?

  Read the article

• How to stop my network connection on WinXP using batch command?

  - by carter-boater

  for example, if I want to stop "lan connection 1" in my control pannel, I usually right click it in my control panel and disable it. Now I want to write a script to disable and enable those connections. How can I do it?? Thank you very much

  Read the article

• How to create a bash script to check the SSH connection?

  - by chutsu

  I am in the process of creating a bash script that would log into the remote machines and create private and public keys. My problem is that the remote machines are not very reliable, and they are not always up. I need a bash script that would check if the SSH connection is up. Before actually creating the keys for future use.

  Read the article

• iPhone SQLite connection in domain object - close each time?

  - by BahaiResearch.com

  I have what I would consider a small sized iPhone app that uses SQLite. There is a singleton domain object which gets data from a SQLite database. Is it better to create and open the SQLite connection for each request, or to open the DB once and hold on to it for the duration of the app. The app's reason for being is the domain object so other objects will not need the DB.

  Read the article

• Ruby, MySQL: Connection pool that is outside of the rails framework?

  - by Zombies

  Is there a ruby gem or such for MySQL connection pooling that isn't part of rails? I simply have a ruby script (again, I don't do anything with rails).

  Read the article

• How to check if internet connection is present in java?

  - by Chris

  How do you check if you can connect to the internet via java? One way would be: final URL url = new URL("http://www.google.com"); final URLConnection conn = url.openConnection(); ... if we got here, we should have net ... But is there something more appropriate to perform that task, especially if you need to do consecutive checks very often and a loss of internet connection is highly probable?

  Read the article

• Wifi Direct P2P-go and P2P-client support in ubuntu

  - by giri

  I am trying to get wifi direct working on a laptop with ubuntu 12.04 When I type the command 'iw list' it doesn't show P2P-client or P2P-go under 'supported interface modes.From http://wireless.kernel.org/en/users/Documentation/iw/replace-iwconfig I found that 'iwconfig' was replaced with 'iw'.Does it mean that my hardware doesn't have support for wifi-direct or is it just the software(drivers) issue? If is it just sofware issue please help me to find the right drivers which support wifi-direct. Here is the info about my ethernet controller from the output of 'lspci' 02:00.0 Ethernet controller: Atheros Communication Inc. AR242x / AR542x Wreless Network Adapter (PCI-Express) (rev 01) 06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 13)

  Read the article

• How can I get a Belkin N600 DB (F9L1101v1) to work on Ubuntu 12,04 64-Bit

  - by rheide

  I could use some assistance to trying to get a Belkin N600 DB Wireless Dual-Band USB Adapter to work on a Dell Inspiron 1525 with 64-Bit Ubuntu 12.04. The device won't work out of the box. Tried to go the NDISWrapper route, but using the GUI, received the following message: Module could not be loaded. Error was: FATAL: Module ndiswrapper not found. Is the ndiswrapper module installed? Despite the fact that it showed up listed in the GUI, the device still did not function properly. How should I proceed from here?

  Read the article

• wpa_supplicant ioctl[SIOCSIWENCODEEXT]: Invalid argument

  - by RobinJ

  I just installed Ubuntu Server on a spare computer with a broken graphic card, and I needed to setup my wifi. I thought No problem, I've done it before from the command line, in Arch Linux., only the steps I had to take in Arch Linux didn't work in Ubuntu Server (that's odd, wasn't Ubuntu supposed to be so much more user-friendly? :/). This is what I'd normally do: ip link set wlan0 up wpa_passphrase <ESSID> <WPA KEY> > /etc/wpa_supplicant.conf wpa_supplicant -B -Dwext -i wlan0 -c /etc/wpa_supplicant.conf dhcpcd wlan0 Only at the wpa_supplicant I get some strane message: ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument And if I try to run dhcpcd then (which I manually installed, as it didn't come preinstalled with Ubuntu Server), it times out. Help on how to do it would be much appreciated. My wireless driver is iwl3945.

  Read the article

• How to set wifi driver settings to prefer 5 GHz channel above 2.4 GHz

  - by Wouter

  Currently I'm in a new building of my university. In this building my wifi often breaks down and then restores connection again. This is really irritating since it happens a lot. Now as a coincidence there were some tech guys running around here and where asking everyone if the wifi was doing fine. I told them that my wifi tears down all the time and then reconnects. They figured out that my wifi is switching all the time between the 2.4 GHz channel and 5 GHz channel. They asked me if I could acces the driver settings of my wireless card. Unfortunately I don't know how to do this is in either Linux or Windows. And unfortunately again they only knew the windows solution xD. So I hope somebody can tell me how I tell my wifi that it should stay on the 5 GHz network and not disconnect and switch to the 2.4 GHz channel?

  Read the article

• help w/ macbook & latest ubuntu

  - by dirtyglove

  what is the latest version of ubuntu i can run w/ WORKING wifi on my macbook 4,1(early 2008)? i dual booted my mac os x lion alongside 12.10 ubuntu but cant figure how to get the wireless to work? so i downgraded to 10.10 for now.. is 10.10 the latest version i can have on my macbook with working wifi? or is there another? or am i just missing a noobish terminal code to fix the drivers? help appreciated! thanks

  Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >