Search Results

Search found 19832 results on 794 pages for 'on screen keyboard'.

Page 82/794 | < Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >

  • Ubuntu 12.04 nomodeset fixes boot problem but causes screen resolution to get stuck

    - by Thunder
    I've been searching the askubuntu forum for the past 3 days trying to figure out what's going on with my system and I have tried a lot of things but to no avail. So, I will explain my situation and tell you what I have tried and I hope someone can help me :) I have an: HP Workstation xw4100 Pentium(R) 4 3.00 GHz 1.5 GB RAM NVIDIA Quadro4 380 XGL graphics card It came with Windows XP and I set it up (with WUBI) to dual boot with Ubuntu 12.04 After installation I had the problem that so many people had with it booting to a black screen (mine was actually booting to the terminal basic shell) that is fixed by adding nomodeset into the grub. When I do that, MY screen resolution becomes stuck in 1280x768 (as opposed to 1366x768 before adding nomodeset) (and also, when running XP the best resolution is 1280x720) When I go to "additional drivers" it doesn't show any proprietary drivers, so I manually downloaded them using this command: sudo apt-add-repository ppa:ubuntu-x-swat/x-updates sudo apt-get update sudo apt-get install nvidia-current but after rebooting, that made the graphics even worse (now stuck as 800x600) SO I tried to configure the drivers with sudo nvidia-xconfig but that simply created an empty xorg.config file. I found one place where a guy gave information to manually input into the xorg.config file but that had no effect at all. Lastly I tried to install previous versions of the NVIDIA drivers, but they wouldn't even fully install. So now I have just re-installed Ubuntu 12.04 and I either need to find a better solution to the first problem (nomodeset) or get the nouveau driver to correctly configure to work with my nvidia graphics. Thanks for your help ahead of time!

    Read the article

  • cpu use goes to 100% when I lock the screen

    - by gianni
    Whenever I lock the screen, after a certain amount of time, the cpu and the cpu fan use go up near the limit, and it returns back to normal the moment I unlock the screen again (as shown by psensor). How can I find out what process is responsible for this? I've tried with "top -S", and the result is this... PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2114 me 20 0 326m 104m 40m R 16 2.6 66:50.03 compiz 1234 root 20 0 396m 152m 98m R 6 3.8 20:23.88 Xorg 2204 me 20 0 160m 38m 30m S 4 1.0 0:33.35 yakuake 2446 me 20 0 206m 18m 12m S 4 0.5 6:32.18 psensor 2280 me 20 0 220m 18m 10m S 2 0.5 5:01.60 unity-panel 9138 me 20 0 154m 27m 15m S 2 0.7 0:03.63 plugin-cont 2282 me 20 0 65800 5272 3316 S 1 0.1 4:36.90 hud-service 2143 me 20 0 140m 11m 8352 S 1 0.3 2:50.16 indicator-m 9095 me 20 0 720m 253m 36m S 1 6.4 0:26.34 firefox 2076 me 20 0 7168 3484 828 S 1 0.1 1:46.53 dbus-daemon 2307 me 20 0 55000 5132 3632 S 1 0.1 2:01.55 indicator-a 2557 me 20 0 86328 6028 4576 S 0 0.1 1:44.71 conky 6290 me 20 0 2836 1296 964 R 0 0.0 0:29.64 top 6291 me 20 0 2836 1188 884 S 0 0.0 0:29.49 top 1 root 20 0 3644 1984 1284 S 0 0.0 60:57.76 init specs: ubuntu 12.04 fresh install intel core i5 4gB ram

    Read the article

  • Screen resolution stuck at 1024x768

    - by Dananjaya
    I just updated from Ubuntu 10.10 to 11.04 and have an issue regarding the screen resolution. I have Intel integrated gfx chip and my monitor supports resolutions larger than 1024x768. (in 10.10 I've been using 1280x1024) But as soon as I upgraded, I'm stuck with 1024x768 resolution and seems I can't change it. running xrandr In terminal yields the following results, Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096 LVDS1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm 1280x800 58.1 + 1024x768 60.0* 800x600 60.3 56.2 640x480 59.9 VGA1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 344mm x 194mm 1366x768 59.9 + 1360x768 60.0 1024x768 75.1 72.0 70.1 60.0* 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 1280x1024_60.00 (0xce) 109.0MHz h: width 1280 start 1368 end 1496 total 1712 skew 0 clock 63.7KHz v: height 1024 start 1027 end 1034 total 1063 clock 59.9Hz What maybe the problem? Is it a bug? What kind of steps I should take in order to get a higher resolution? (changing xorg.conf maybe?) Any insight is highly appreciated. Thanks in advance. UPDATE Screenshot after running xrandr --addmode VGA1 1360x768 As you can see, side bar is not completely visible and Ubuntu logo at the task bar is missing. Also when you open an application, the Task bar of the application (where it should go to the top panel) is missing as well..

    Read the article

  • How to delete just one LINE of text (NOT a table-row!) with a single KEYBOARD shortcut in Microsoft Office Word 2010?

    - by Sk8erPeter
    Are there any shortcuts to delete just one row (which is NOT a table row, just a single row in a text) in Microsoft Office Word 2010? If not, how can I assign one to do it? In worst case, can I make a macro (in VB) which could do the same with a custom shortcut? To clarify my problem: I would like to avoid multiple clicks and/or pushing multiple buttons, even if I click in the middle of the line of text. :) For example, in Notepad++ I can delete the entire current line with Ctrl+L, in NetBeans, I can delete an entire line with Ctrl+E, in Eclipse, I can delete current line with Ctrl+D, etc., where it doesn't really matter where my mouse cursor is actually... so there are these simple solutions, which I look for in Word too. It really would simplify my work in huge documents.

    Read the article

  • Lubuntu 12.04 on Acer laptop boots to blank blue screen

    - by WGCman
    My previous question on this was closed, but I am posting it again as the solution which my son eventually found may assist other users of the forum, or someone may be able to tweak the solution to improve the performance. Having installed Kubuntu 12.04.01 from a live USB onto my desktop, I wanted to do the same on my laptop, an Acer Aspire 1362 Laptop, which has 256MB RAM (actually 512 "on the box", but a good deal can be borrowed by the graphics!). I found Kubuntu wouldn't run on so little memory but downloaded: Lubuntu-12.04-alternate-i386.iso, which I understood was light enough to go. The laptop has one internal 40GB Toshiba hard drive divided into 3 partitions: C,19GB with Windows XP, Windows program files and some data, D, 19GB mostly data, and a small 2GB partition with some Acer software, which XP can't normally “see”. I transferred most of the contents of D to a memory stick, leaving 16GB free for Lubuntu. I did not want to dump XP yet, though it is painfully slow. I installed Lubuntu from then USB stick, accepting the default answers to most of the questions. The D: partition was further partitioned into a 500MB boot partition, 10GB for Linux, 2GB Swap and 6GB for data shareable between Linux and Windows. I had no error messages during installation, rebooted, was offered the choice of Ubuntu or XP, and selected the former. After a few minutes, I get a dark blue screen announcing Lubuntu with five dots underneath which lighten in turn. Eventually the lights stopped, and whatever I try the screen remains blank apart from “Lubuntu” I tried several solutions suggested on the forum for “identical” questions but without success.

    Read the article

  • Visual Studio 2010 Zooming Keyboard Commands, Global Zoom

    One of my favorite features in Visual Studio 2010 is zoom. It first caught my attention as a useful tool for screencasts and presentations, but after getting used to it Im finding that its really useful when Im developing letting me zoom out to see the big picture, then zoom in to concentrate on a few lines of code. Zooming without the scroll wheel The common way youll see this feature demonstrated is with the mouse wheel you hold down the control key and scroll up or down to change font size....Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Automatically revert to laptop screen when external monitor unplugged

    - by Ryan
    I regularly use an external monitor with my laptop, so when I use it, I usually have the laptop screen disabled when the monitor is connected, and this seems to cause problems when the monitor is disconnected. If the monitor is connected while the laptop screen is disabled, I can't get the X session to show up at all: I can Ctrl+Alt+F1 to open a terminal, and that works fine.. ..but Ctrl+Alt+F7 does nothing. The display is blank, and stays blank. The same thing happens whether I put the computer to sleep with the monitor connected, or if I disconnect while the computer is still awake. Rebooting the computer fixes the issue, as does killing Xorg and starting it again, but both of those are sub-optimal since I lose my current session. I'm currently using the open source graphics driver (xserver-xorg-video-ati). This question looks like it might answer my question, but unfortunately hwinfo is no longer available in the apt repository. Is there a way with current tools to automatically detect when the external monitor is disconnected and switch to the laptop display?

    Read the article

  • Intel N10 graphics

    - by Rapsag1980
    Español: Buen día. Instalé en una notebook ubuntu 12.04 pero me da el problema que solamente me da dos resoluciones de pantallas 800x600 y 1024x768... En la primera se ve muy grotesca la pantalla y en la segunda se ve bien, pero falta un pedazo de pantalla arriba y abajo... He tratado de buscar información sobre el tema pero parece uno de esos "bugs" que no han conseguido ser erradicados... Intenté hacer el Xorg.conf y esas cosas y nomas no se puede... Recurro a su sapiencia y experiencia en este tipo de problemas... La mini es una Lanix Neuron lt, procesador intel atom n450 y la tarjeta Intel corporation N10 family integrated graphics controller.... Inglés: Good day. I installed ubuntu 12.04 on a notebook but I get the problem that only gives me two screen resolutions of 800x600 and 1024x768 ... The first screen looks very grotesque and the second looks good, but missing a piece of screen up and down ... I tried to find information on the subject but it seems one of those "bugs" that have failed to be eradicated ... I tried to do the Xorg.conf nomas and stuff and you can not ... I appeal to your wisdom and experience in this kind of problem ... The mini is a Neuron Lanix lt, Intel Atom N450 processor and the Intel integrated graphics family corporation N10 controller ....

    Read the article

  • Screen going black, further investigation reveals healthy ram and hard disk, and several kernel oops logs

    - by Virulan
    Six days ago, I went to go take a shower, and I suspended Ubuntu as usual, to save battery life. I came back, and the screen was black. REISUB and general fiddling around did nothing. Restarted, and still had nothing on the screen. Since then, this has happened several times, and the only fix is to 1) force shut laptop, 2) take out battery, 3) hold power button, 4) put battery back in, 5) boot. I have investigated further into the matter, doing a ram test and a hard disk check. Both turned out fine, but then my attention turned towards the error messages I was receiving upon bootup, the whole "System program problem detected" dealio. I did some digging and found four kernel oops logs in my /var/crash. What I can understand of them points to two things, 1) they are connected to my suspending problems, since there are four them (I have had four suspending crashes), and they both confirm that there was a issue with waking up from suspend, and 2) the crashes might have to do with Python (possibly could be jumping to conclusions), since mentions of Python are peppered throughout the logs. At this point, I am unsure of how to continue, and I have come here for help. Is there any way I can fix this? Should I start by uploading the logs here?

    Read the article

  • Multitouch screen not detected on Asus Taichi 21DH71

    - by geekfreak
    I just bought this Ultrabook "Asus Taichi 21 DH71". This has Intel 3rd generation i7 processor and 4gb ram with 256 gb SSD. The main feature is that it is a hybrid machine. Naming it has dual screens. When the lid is closed it can be used as a tablet and when lid open it can be used as a notebook. This machine can also be used with the two screens on at the same time. I used ubuntu many years ago and loved it. But I never tried any linux later. My questions are Does the new version of Ubuntu support the Multitouch interface? Will it work specifically on this machine? Will Ubuntu support gestures on multi touchpad? Update 2/22/2013 I did try the latest 64bit Ubuntu(12.10) from live usb and noticed that it couldn't detect the tablet screen. Everything else worked seamlessly. Do you guys think the tablet screen would be detected if I make a complete installation on to the notebook? Please help guys..

    Read the article

  • Dual booted Windows 7 freezes after login screen

    - by Cathal
    First-time Linux user, using a Packard Bell Easy Note TS laptop. My problem arose after I dual boot installed Ubuntu 12.04 on Windows 7 via WUBI. I backed up all my data, and reinstalled Windows from factory settings on the recovery partition. When I first tried to install Ubuntu I mistakenly closed the lid at the start of the installation, stopping it. After that I rebooted, and my second installation attempt went without a hitch. Ubuntu works perfectly, the data on the partitions seem to be fine. My problem is I can't log back in to Windows 7. After selecting it in GRUB, and then in the Windows 7/ WUBI choice on boot, it loads up perfectly til the user log in screen. After the password is inputted, it stalls on the "Welcome" busy screen. This happens in Safe mode as well. Startup repair can't find a problem and neither can CHKDSK. System restore and Last known good config have no effect either. If anyone could help me out, I'd be real grateful. edit in response to the question below, since I don't know how to comment: Windows was installed first and its partitions are the first on the list. Should I move the windows partitions to after the Linux ones on the disk? Thanks for your help.

    Read the article

  • Ubuntu Unity (64-bit) Bugs on Nvidia dual screen [closed]

    - by Kristofer
    On my work computer I have upgraded 10.04 to 10.10 and now to 11.04. Upgrades have mostly worked well and the dual screen setup is almost working. There are however a couple of annoying bugs which I tried to report but the bug reporting tool told me to ask about the bugs here. Here's what I have found: Auto-hide stops working. It doesn't seem to matter which application is maximised/covering the dock, it just stays on top. I have tested changing the autohide settings with no result. Scenario: One maximised window on each screen. If I now try to drag the window that doesn't have focus by dragging the top of the window nothing happens. I can also not give the window focus by clicking the top bar, I have to click inside the window and then I can drag the window. If I unmaximise the window with focus it does work and I can both change focus and drag the window directly by clicking the top of the maximised window. Any bug fixes coming for these issues? Any work-arounds?

    Read the article

  • Failing Screen Resize Method

    - by StrongJoshua
    So I want my game to draw to a specific "optimal" size and then be stretched to fit screens that are a different size. I'm using LibGDX and figured that I could just draw everything to a FrameBuffer and then resize that buffer to the appropriate size when drawing it to the actual display. However, my method does not work, it just results in a black screen with the top right quarter of the screen white.Intermediary is the FBO, interMatrix is a Matrix4 object, and camera is an OrthographicCamera. @Override public void render() { // update actors currentStage.act(); //render to intermediary buffer batch.setProjectionMatrix(interMatrix); intermediary.begin(); batch.begin(); currentStage.draw(); batch.flush(); intermediary.end(); //resize to actual width and height Sprite s = new Sprite(intermediary.getColorBufferTexture()); s.flip(true, false); batch.setProjectionMatrix(camera.combined); batch.draw(s.getTexture(), 0, 0, width, height); batch.end(); } These are the constructors for the above mentioned objects (GAME_WIDTH and HEIGHT are the "optimal" settings, width and height are the actual sizes, which are the same when running on desktop). intermediary = new FrameBuffer(Format.RGBA8888, GAME_WIDTH, GAME_HEIGHT, false); interMatrix = new Matrix4(); camera = new OrthographicCamera(width, height); interMatrix.setToOrtho2D(0, 0, GAME_WIDTH, GAME_HEIGHT); Is there a better way of doing this or can is this a viable option and how do I fix what I have?

    Read the article

  • monitor height differences & the mouse going off screen

    - by fastmultiplication
    In ubuntu 10.10 I have a dual monitor setup. I have an nVidia graphics card and am using twinview. One of the monitors is 1024 pixels high and the other is 900. In the monitor configuration screen & in real life, I have them set up side by side, 1024 on the left. The result of this is that when I am on the bottom of the left monitor and move the mouse to the right, it goes into the hidden area below the right monitor's visible area. It seems like it would make a lot more sense for it to be bumped up to the bottom of the right monitor - since one almost never wants to move the mouse into an area of the screen that doesn't show up. And, systems I have used before have been set up that way. How can I set this up? I am not interested in lists of window managers for ubuntu; I would like to know the identity of a particular WM or set of steps I can take to solves the particular problem I have outlined above. Thanks! EDIT: I changed to use two seperate X window monitors, and set them up relatively positioned so that just the corner touches and the mouse can cross there, so the difference in heights doesn't matter.

    Read the article

  • Ubuntu live cd : black screen and blinking cursor

    - by IFasel
    I try to install ubuntu 12.04 on my computer. I can get to the purple screen on the live cd but then, if I choose "Installing Ubuntu", I have a black screen with a cursor blinking (and nothing else happens). My PC : acer aspire M3920, CPU i5-2300, 8 Gb RAM, NVIDIA gt 405. What I already tried : I tried with 12.04 and 13.04 daily build I tried with a live usb and with a live dvd I tried the following boot options : nomodset, acpi=off I googled a lot and it seems that it could be a graphic card problem. Do you know any other boot options that I could try ? UPDATE This is not a duplicate : I've tried all the common boot options (nomodeset, noacpi...) and it doesn't change anything. With the option "no splash" (instead of "quiet splash"), I can see what happens before the forever-blinking cursor : [sdg] no caching mode present [sdg] assuming drive cache : write trough ata8.00: excetion Emask 0x52 ... frozen ata8 : SError : { RecovData RecovComm UnrecovData...} ata8.00 : failed command : IDENTIFY PACKET DEVICE ... ata8.00 : status : { DRDY } ata8 : hard resetting link Does somebody know what it means ? N.B. astonishingly, Puppy Linux boots fine (but Debian, Fedora and Ubuntu do not) Solution In fact, it was not a graphic card problem. I had to disconnect the dvd drive and connect it to another free sata connector (I don't really understand why Ubuntu had trouble with this connector and Windows 7 not). After that, everything worked fine.

    Read the article

  • SQL Server Management Studio keyboard shortcuts - Part 1

    As responsibilities are growing every day, a DBA or developer needs to improve his/her productivity. One way to do this is to use as many shortcuts as possible instead of using your mouse and the menus. In this tip we take a look at common tasks you may perform when using SSMS and the associated shortcut keys. SQL Backup Pro SQL Backup Pro was the smartest kid at school. Discover why.

    Read the article

  • Can't log-in anymore

    - by Awake Zoldiek
    I installed Ubuntu x64 12.04 Desktop LTS on my new laptop three days ago. Of course when I installed it I did an "apt-get upgrade" and a "apt-get update". I modified the .bashrc file to add some aliases but that's about it. Everything went fine I think, but this morning when I tried to connect to my user account, it just simply didn't work. Even when I give the right password, it will send me to a black screen with a few text lines written in white for a second and then back to the log-in screen. When I logged into the guest session, I couldn't shutdown / restart. I tried the "rm /home/MyUsername/.Xauthority" solution after doing a Ctrl + Alt + F1 at the log-in screen. But that didn't work. Does anyone has an idea ? My Ubuntu seems to use Gnome. Thank you a lot in advance ! This question is similar to this one, but their solution didn't help : -- after 12.04 upgrade: can't log in although password is correct

    Read the article

  • Split up a screen into regions

    - by nexen
    My task: I want to split up a screen into 3 regions for buffs-bar (with picked items), score-info and a game-map. It doesn't matter are regions intersect with each other or not. For example: I have a screen with width=1; height=1 and the origin of coordinates (0;0) is the left bottom point. I have 3 functions: draw items, draw info, draw map. If I use it without any matrix transformations, it draws fullscreen, because it's vertex coordinates are from 0;0 to 1;1. (pseudo-code) drawItems(); drawInfo(); drawMap(); And after that I see only map onto info onto items. My goal: I have some matrixes for transformation vertexes with 0;0-1;1 coordinates to strict regions. There is only one thing, what I need to do - set matrix before drawing. So my call of drawItems-function is like: (pseudo-code) adjustViewMatrixes_andSomethingElse(items.position_of_the_region_there_it_should_be_drawn, items.sizes_of_region_to_draw); setItemsMatrix(); drawItems(); //the same function with vertex coordinates 0;0->1;1, //but it draws in other coordinates, //because I have just set the matrix for region I know only some people will understand me, so there is a picture with regions which I need to make. Every region has 0;0 - 1;1 inner coordinates.

    Read the article

  • Scaling sprite velocity / co-ordinatesin Android

    - by user22241
    I'm trying to find the answer to a question that I've had for a long time, but am having trouble finding it! I hope someone can help :-) I'm trying to find information on how to scale sprite velocity / movement / co-ordinates. What I mean by this is how do I get a sprite to move at the same speed relative to the screen size / DPI so that it takes the same amount of real-time to get from one side of the screen to the other? All of the posts pertaining to sprite scaling that I can find on the various forums relate to the size of the sprite, but this part of it I'm OK with so far, it's just that when I move a sprite, it kind of gets there at different speed depending on the dpi / resolution of the device. I hope I'm making sense. This is the code I have so far, instead of using explicit amounts, like 1, I'm using something like the following: platSpeedFloat= (1 * (dpi/160)); //Use '1' so on an MDPI screen, the sprite will move by 1 physical pixel Then basically what I'm doing is something like this: (all varialble previously declared) platSpeedSave+=platSpeedFloat; //Add the platSpeedFloat value to the current platSpeedSave value platSpeed=(int) platSpeedSave; //Cast to int so it can be checked in the following statement if (platSpeed==platSpeedSave) //Check the casted int value to float value stored previoiusly {floorY=floorY-platSpeed; //If they match then change the Y value platSpeedSave=0;} //Reset Would be grateful if someone could assists - hope I'm making sense. The above doesn't seems to work the sprite moves 'faster' on lower DPI screens. Thanks

    Read the article

  • Black Screen (but with cursor) after wake-up from suspend to RAM

    - by Naseschwarz
    [Lenovo Thinkpad X60] After upgrading to 12.04, first thing I did was get suspend to HDD back, because I don't use my battery a lot. So I did that. After a while (about a week, I upgraded on release, not beta), maybe a week or so, I started getting black screens from time to time after waking it up from suspend to RAM. I never got that problem with suspend to HDD. As it only happens sometimes, I can't reproduce it o.O Sometimes it doesn't happen for a week (daily use, approx 2-6 wake-ups a day), then every single time. The precise symptoms are as follows: normally I got a black screen with my cursor on it, which can be moved, no problems there. I can't interact with the system in any way except for turning it off on the 1/0 button... the weird thing is, the cursor seems to react to what I had opened when going into suspend to RAM, so for instance one day I had writer open and then my cursor was a "I" for most of the screen. I only get this in 12.04, never had any problems with this in 9.04-11.10. Any ideas? Big thx in advance!

    Read the article

  • How to Draw Lines on the Screen (Part 2)

    - by Geertjan
    In part 1, I showed how you can click on the screen to create widgets and then connect those widgets together. But that's not really drawing, is it? (And I'm surprised nobody made that point in the comments to that blog entry.) Drawing doesn't really revolve around connecting dots together. It's more about using a free-flow style and being able to randomly write stuff onto a screen, without constraints. Something like this: I achieved the above by changing one line of code from the original referred to above. Instead of using a "mousePressed" event, I'm now using a "mouseDragged" event. That's all. And now the widgets are created when I drag my mouse on the scene. (I removed the rectangular select action, since that's also invoked during dragging and since that doesn't apply to the above scenario.) Now, the next step is to rewrite the NetBeans Platform Paint Application Tutorial, so that the Visual Library is used. That would be pretty cool.

    Read the article

  • Random greyed unresponsive screen on netbook

    - by user643722
    I love my Asus Eee PC 1000 Ubuntu 12.04 netbook, but I have a little problem. As I use it, the screen will randomly turn grey and become unresponsive. I can then only wait, until perhaps 10-60 secs. later, when I can interact again. Only the bar at the top of my screen retains its colour throughout. I thought it might be Firefox, as I have a lot of tabs open. I installed Chromium, used it instead, and the problem remained. A while back I upgraded from 1 to 2 Gb RAM. So, I thought recently, maybe I should increase the swap-space. I have 738Mb of 7.2Gb free on root; and 2Gb of 28Gb free on my home drive. I bought a 32 Gb SD Card and assigned 4Gb to swap space. cat /proc/swaps reports that the partition is being used. Alas the problem remains. Does anyone know what's wrong with my machine? The SD Card has changed my machine somewhat, but the greying still happens. I ran free -m shortly after another episode, and received: total used free shared buffers cached Mem: 2004 1731 272 0 370 769 -/+ buffers/cache: 591 1412 Swap: 4073 0 4073 Update: Using 'top', I can see that compiz uses about 43% of the CPU (#1 position) when the greying occurs. After the greying, compiz drops back down to its usual 8% of CPU.

    Read the article

  • Efficiently checking input and firing events

    - by Jim
    I'm writing an InputHandler class in XNA, and there are several different keys considered valid input (all of type Microsoft.XNA.Framework.Input.Keys). For each key, I have three events: internal event InputEvent XYZPressed; internal event InputEvent XYZHeld; internal event InputEvent XYZReleased; where XYZ is the name of the Keys object representing that key. To fire these events, I have the following for each key: if (Keyboard.GetState().IsKeyDown(XYZ)) { if (PreviousKeyState.IsKeyDown(XYZ)) { if (XYZHeld != null) XYZHeld(); } else { if (XYZPressed != null) XYZPressed(); } } else if (PreviousKeyState.IsKeyDown(XYZ)) { if (XYZReleased != null) XYZReleased(); } However, this is a lot of repeated code (the above needs to be repeated for each input key). Aside from being a hassle to write, if any keys are added to/removed from the keys (if functionality is added/removed), a new section needs to be added (or an existing one removed). Is there a cleaner way to do this? Perhaps something along the lines of foreach key check which state it's in fire this key's event for that state where the code does the foreach (automatically checking exactly those keys that "exist") rather than the coder?

    Read the article

  • D key not working on Ubuntu

    - by Jonathan
    For some inexplicable reason the capital d key on my Ubuntu system is no longer producing output. Hitting caps lock and then d produces a D. I've tried multiple keyboards and the issue is the same. There's nothing bound to Shift+d under System Preferences Keyboard Shortcuts. xev produces the following: shift + a KeyPress event, serial 36, synthetic NO, window 0x4c00001, root 0x27a, subw 0x0, time 31268952, (130,-16), root:(1000,525), state 0x10, keycode 62 (keysym 0xffe2, Shift_R), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyPress event, serial 36, synthetic NO, window 0x4c00001, root 0x27a, subw 0x0, time 31269376, (130,-16), root:(1000,525), state 0x11, keycode 38 (keysym 0x41, A), same_screen YES, XLookupString gives 1 bytes: (41) "A" XmbLookupString gives 1 bytes: (41) "A" XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x4c00001, root 0x27a, subw 0x0, time 31269584, (130,-16), root:(1000,525), state 0x11, keycode 38 (keysym 0x41, A), same_screen YES, XLookupString gives 1 bytes: (41) "A" XFilterEvent returns: False KeyRelease event, serial 36, synthetic NO, window 0x4c00001, root 0x27a, subw 0x0, time 31269608, (130,-16), root:(1000,525), state 0x11, keycode 62 (keysym 0xffe2, Shift_R), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False shift + d KeyPress event, serial 36, synthetic NO, window 0x4c00001, root 0x27a, subw 0x0, time 31102792, (115,-13), root:(985,528), state 0x10, keycode 62 (keysym 0xffe2, Shift_R), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False FocusOut event, serial 36, synthetic NO, window 0x4c00001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 36, synthetic NO, window 0x4c00001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 36, synthetic NO, window 0x0, keys: 2 0 0 0 0 0 0 64 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 KeyRelease event, serial 36, synthetic NO, window 0x4c00001, root 0x27a, subw 0x0, time 31103104, (115,-13), root:(985,528), state 0x11, keycode 62 (keysym 0xffe2, Shift_R), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False

    Read the article

  • creating a pre-menu level select screen

    - by Ephiras
    Hi I am working on creating a tower Defence java applet game and have come to a road block about implementing a title screen that i can select the level and difficulty of the rest of the game. my title screen class is called Menu. from this menu class i need to pass in many different variables into my Main class. i have used different classes before and know how to run them and such. but if both classes extend applet and each has its individual graphics method how can i run things from Main even though it was created in Menu. what i essentially want to do is run the Menu class withits action listeners and graphics until a Difficulty button has been selected, run the main class (which 100% works without having to have the Menu class) and pretty much terminate Menu so that i cannot go back to it, do not see its buttons or graphics menus. can i run one applet annd when i choose a button close that one and launch the other one? IF you would like to download the full project you can find it here, i had to comment out all the code that wasn't working my Menu class import java.awt.*; import java.awt.event.*; import java.applet.*; public class Menu extends Applet implements ActionListener{ Button bEasy,bMed,bHard; Main m; public void init(){ bEasy= new Button("Easy"); bEasy.setBounds(140,200,100,50); add(bEasy); bMed = new Button("Medium");bMed.setBounds(280,200,100,50); add(bMed); bHard= new Button("Hard");bHard.setBounds(420,200,100,50); add(bHard); setLayout(null); } public void actionPerformed(ActionEvent e){ Main m = new Main(20,10,3000,mapMed);//break; switch (e.getSource()){ case bEasy: Main m = new Main(6000,20,"levels/levelEasy.png");break;//enimies tower money world case bMed: Main m = new Main(4000,15,"levels/levelMed.png");break; case bHard: Main m = new Main(2000,10,"levels/levelEasy.png");break; default: break; } } public void paint(){ //m.draw(g) } } and here is my main class initialising code. import java.awt.*; import java.awt.event.*; import java.applet.*; import java.io.IOException; public class Main extends Applet implements Runnable, MouseListener, MouseMotionListener, ActionListener{ Button startButton, UpgRange, UpgDamage; //set up the buttons Color roadCol,startCol,finCol,selGrass,selRoad; //set up the colors Enemy e[][]; Tower t[]; Image towerpic,backpic,roadpic,levelPic; private Image i; private Graphics doubleG; //here is the world 0=grass 1=road 2=start 3=end int world[][],eStartX,eStartY; boolean drawMouse,gameEnd; static boolean start=false; static int gridLength=15; static int round=0; int Mx,My,timer=1500; static int sqrSize=31; int towers=0,towerSelected=-10; static int castleHealth=2000; String levelPath; //choose the level Easy Med or Hard int maxEnemy[] = {5,7,12,20,30,15,50,30,40,60};//number of enimies per round int maxTowers=15;//maximum number of towers allowed static int money =2000,damPrice=600,ranPrice=350,towerPrice=700; //money = the intial ammount of money you start of with //damPrice is the price to increase the damage of a tower //ranPrice is the price to increase the range of a tower public void main(int cH,int mT,int mo,int dP,int rP,int tP,String path,int[] mE)//constructor 1 castleHealth=cH; maxTowers=mT; money=mo; damPrice=dP; ranPrice=rP; towerPrice=tP; String levelPath=path; maxEnemy = mE; buildLevel(); } public void main(int cH,int mT,String path)//basic constructor castleHealth=cH; maxTowers=mT; String levelPath=path; maxEnemy = mE; buildLevel(); } public void init(){ setSize(sqrSize*15+200,sqrSize*15);//set the size of the screen roadCol = new Color(255,216,0);//set the colors for the different objects startCol = new Color(0,38,255); finCol = new Color(255,0,0); selRoad = new Color(242,204,155);//selColor is the color of something when your mouse hovers over it selGrass = new Color(0,190,0); roadpic = getImage(getDocumentBase(),"images/road.jpg"); towerpic = getImage(getDocumentBase(),"images/tower.png"); backpic = getImage(getDocumentBase(),"images/grass.jpg"); levelPic = getImage(getDocumentBase(),"images/level.jpg"); e= new Enemy[maxEnemy.length][];//activates all of the enimies for (int r=0;r<e.length;r++) e[r] = new Enemy[maxEnemy[r]]; t= new Tower[maxTowers]; for (int i=0;i<t.length;i++) t[i]= new Tower();//activates all the towers for (int i=0;i<e.length; i++)//sets all of the enimies starting co ordinates for (int j=0;j<e[i].length;j++) e[i][j] = new Enemy(eStartX,eStartY,world); initButtons();//initialise all the buttons addMouseMotionListener(this); addMouseListener(this); }

    Read the article

< Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >