Search Results

Search found 2616 results on 105 pages for 'yi ping'.

Page 82/105 | < Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >

• Outlook 2007 unable to connect to exchange server

  - by mattwarren

  I came into the office a week ago and outlook has refused to connect ever since, it just says "Disconnected" in the bottom right-hand corner. I've tried restarting it, rebooting Windows etc. I'm the only one if our office who is having this problem, so it's not a general problem with the server. Things I've tried Pinging the server via IP address and host name, both work fine Connecting via OWA, this works using the same machine name Connecting to Exchange via HTTP ("Outlook Anywhere") doesn't work None of the suggestions in this question helped, http://serverfault.com/questions/21755/can-ping-exchange-server-cant-connect-outlook-to-it Disabling Windows firewall on my laptop also has no effect. There are no items in the event viewer that indicate that anything it up. Also no permissions have changed on the server since when it worked. Update: I've just tried logging onto a completely different PC, using my domain controller user-name/password. When I setup outlook on there it also fails, so the problem isn't specific to 1 pc/outlook it's something about my particular user name, but not when using OWA? What else can I do to diagnose this, any suggestions?

  Read the article

• Handshake violation when trying to access one website

  - by Miguel

  I have a TZ 190 Wireless Enhanced with SonicOS Enhanced 4.2.1.0-20e. Yesterday, people could access without any problems a bank website wich uses HTTPS. Today, it is imposible to access only that website, every other ones works without problems. When checking the log message filtering to my IP only, this is what appears and I suspect is the cause of this problem, because all other websites are working: Priority: Notice Category: Network Access Message: TCP handshake violation detected; TCP connection dropped Source: X.Y.Z.3, 51997, LAN (admin) Destination: 200.14.232.18, 443, WAN Notes: Handshake Timeout Where X.Y.Z.3 is my local IP. I've tried to change TCP Settings under Firewall option, and activated this options with no success: Enforce strict TCP compliance with RFC 793 and RFC 1122 and Enable TCP checksum enforcement I've also tried to find the MTU and at first I got: Packet needs to be fragmented but DF set But when I lower the value of ping -f -l to 1468 I got: Request timeout. Also I deactivate CFS in lan and wan zones. Nothing works. Can you please help me? Any Ideas?

  Read the article

• UNC Path fails by IP "no network provider accepted the given network path", but works using hostname

  - by BoyMars

  I have an unusual problem with a Windows Server 2003 (Standard x86) box. It appears the machine will not accept connections to its shares (locally and from other domain member servers) by using its ip address in a UNC path. The error returned is: "no network provider accepted the given network path" This is the case with the machine's ip address: \\10.0.8.x and even the loopback address: \\127.0.0.1 \\localhost does not work... but using the hostname (fqdn or not) works: \\server & \\server.domain.local The local windows firewall for this server is off, ping/rdp/other services respond fine using the IP address. The following services are running and have been restarted: Computer Browser Workstation Server The server itself has been rebooted too. Event 8032 in the system log indicates that: The browser service has failed to retrieve the backup list too many times on transport \Device\NetBT_Tcpip_{29A6A925-AFB3-47E2-BA59-DDA086DEAE7A}. The backup browser is stopping. The domain controller has not been restarted, no other servers have experienced this problem, yet there are a number of browser (8021) related errors in the logs on this server. Does anyone have any suggestions? I would like to avoid rejoining this server to the domain if possible.

  Read the article

• Cisco: Site-to-site VPN with cisco 878 and ASA weirdness

  - by cpf

  I currently have 2 sites, both connected to each other through 2 firewalls / routers in a site-to-site VPN. Pinging from server to server (Using 2mb/2mb SDSL) through that VPN obviously works, however, at one site, we have another internet connection (7m/400k ADSL), and only the link between the two sites should be on the other connection. All pc's should go over the other connection for internet, just communication between servers & Communication between pc's and the server at the other side should go through there too. What is configured at the moment is the server is using the SDSL directly as default gateway. Since it's not intended to surf anything it is a safe config. PC's are configured on the ADSL as default gateway. Now I wanted to route through everything that uses the range used on the other site, it should be sent from the ADSL modem to the SDSL modem, which has the VPN connection. I figured I could use OSPF to do so, however, OSPF doesn't seem to "detect" the range of the external site. Also (due to bad ip subnetting thanks to the other administrator), the ip used internally as the server on the other site also exists on the internet (causing a lot of confusion), so rdp-ing from our server to the server of the other site works (somehow), but tracerouting on the SDSL router (which should actually, in my opinion, go over the VPN) actually goes all over the internet. My question(s): Why doesn't the SDSL router ping the external ip through VPN, but the server does? Why can't I route from the ADSL router to the SDSL over VPN? I would seriously appreciate some help, since I can't figure out why it does it like this.

  Read the article

• Cisco ASA 5505 allowing inbound ICMPv6

  - by Astron

  I am trying to allow inbound unsolicited ICMPv6 requests from an external link-local address to my outside (external) interfaces link-local address. I can ping (echo-request) the external address and receive a pong (echo-reply) but ICMPv6 messages initiated on the far side are dropped. I am running 9.0(1) in order to use some of the newer features. Does the Cisco ASA not allow unsolicited inbound requests from a link-local address? Should it matter if all ICMPv6 is allowed? Statements being denied: %ASA-3-313008: Denied IPv6-ICMP type=129, code=0 from fe80::XXXX:XXXX:XXXX:XXXX on interface outside %ASA-3-313008: Denied IPv6-ICMP type=131, code=0 from fe80::XXXX:XXXX:XXXX:XXXX on interface outside %ASA-3-313008: Denied IPv6-ICMP type=131, code=0 from fe80::XXXX:XXXX:XXXX:XXXX on interface outside %ASA-3-313008: Denied IPv6-ICMP type=136, code=0 from fe80::XXXX:XXXX:XXXX:XXXX on interface outside %ASA-3-313008: Denied IPv6-ICMP type=136, code=0 from fe80::XXXX:XXXX:XXXX:XXXX on interface outside %ASA-3-313008: Denied IPv6-ICMP type=136, code=0 from fe80::XXXX:XXXX:XXXX:XXXX on interface outside I created both an inbound ACL and ICMP permit statements: access-list OUTSIDE-IN extended permit icmp6 any any access-list OUTSIDE-IN extended permit icmp6 any any membership-report access-list OUTSIDE-IN extended permit icmp6 any any membership-report 0 access-list OUTSIDE-IN extended permit icmp6 any any echo-reply 0 access-list OUTSIDE-IN extended permit icmp6 any any echo-reply access-list OUTSIDE-IN extended permit icmp6 any interface outside membership-report access-list OUTSIDE-IN extended permit icmp6 any interface outside membership-report 0 access-list OUTSIDE-IN extended permit icmp6 any6 any6 echo-reply access-list OUTSIDE-IN extended permit icmp6 any6 any6 membership-report access-list OUTSIDE-IN extended permit icmp6 any6 any6 echo-reply 0 access-list OUTSIDE-IN extended permit icmp6 any6 any6 membership-report 0 snip access-group OUTSIDE-IN in interface outside ipv6 icmp permit any inside ipv6 icmp permit any membership-report outside ipv6 icmp permit any echo-reply outside ipv6 icmp permit any router-advertisement outside ipv6 icmp permit any neighbor-solicitation outside ipv6 icmp permit any neighbor-advertisement outside ipv6 icmp permit any outside

  Read the article

• mount.nfs: access denied by server while mounting (null), can't find any log information

  - by Mark0978

  Two ubuntu servers: 10.0.8.2 is the client, 192.168.20.58 is the server. Between the 2 machines, Ping works, ssh works (in both directions). From 10.0.8.2 showmount -e 192.168.20.58 Export list for 192.168.20.58: /imr/nfsshares/foobar 10.0.8.2 mount.nfs 192.168.20.58:/imr/nfsshares/foobar /var/data/foobar -v mount.nfs: access denied by server while mounting (null) Found several things online, tried them all and still can't find any log information anywhere. On the server: [email protected]:/var/log# cat /etc/hosts.allow sendmail: all ALL: 10.0.8.2 /etc/hosts.deny is all comments How can I get a trail of log statements to figure this out? What does it take to get some logging so I have some idea of WHY it won't mount? On the server: [email protected]# nmap -sR RPC 192.168.20.58 Starting Nmap 5.21 ( http://nmap.org ) at 2012-07-04 21:16 CDT Failed to resolve given hostname/IP: RPC. Note that you can't use '/mask' AND '1-4,7,100-' style IP ranges Nmap scan report for 192.168.20.58 Host is up (0.0000060s latency). Not shown: 988 closed ports PORT STATE SERVICE VERSION 22/tcp open unknown 80/tcp open unknown 111/tcp open unknown 139/tcp open unknown 445/tcp open unknown 902/tcp open unknown 2049/tcp open unknown 3000/tcp open unknown 5666/tcp open unknown 8009/tcp open unknown 8222/tcp open unknown 8333/tcp open unknown Nmap done: 1 IP address (1 host up) scanned in 3.81 seconds From the client: [email protected]:~$ nmap -sR RPC 192.168.20.58 Starting Nmap 5.21 ( http://nmap.org ) at 2012-07-04 22:14 EDT Failed to resolve given hostname/IP: RPC. Note that you can't use '/mask' AND '1-4,7,100-' style IP ranges Nmap scan report for 192.168.20.58 Host is up (0.73s latency). Not shown: 988 closed ports PORT STATE SERVICE VERSION 22/tcp open unknown 80/tcp open unknown 111/tcp open rpcbind (rpcbind V2) 2 (rpc #100000) 139/tcp open unknown 445/tcp open unknown 902/tcp open unknown 2049/tcp open nfs (nfs V2-4) 2-4 (rpc #100003) 3000/tcp open unknown 5666/tcp open unknown 8009/tcp open unknown 8222/tcp open unknown 8333/tcp open unknown Nmap done: 1 IP address (1 host up) scanned in 191.56 seconds

  Read the article

• Windows 2003 Domain Controller Very Upset about NIC Teaming

  - by Kyle Brandt

  I set up BACS (Broadcom Teaming) to team two NIC on a Windows 2003 Active Directory Domain Controller. Networking still works okay, I can ping the gateway etc, but both DNS and Active Directory fail to start with various 40xx errors. The team that I created is Smart load Balancing with Failover, with one backup and only one in smart load balancing (So really it is just failover). I have the team the same IP address that the single active NIC had before. Anyone seen this before, or have any ideas what the problem might be? Event Type: Error Event Source: DNS Event Category: None Event ID: 4015 Date: 3/7/2010 Time: 10:33:03 AM User: N/A Computer: ADC Description: The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error. Event Type: Error Event Source: DNS Event Category: None Event ID: 4004 Date: 3/7/2010 Time: 10:33:03 AM User: N/A Computer: ADC Description: The DNS server was unable to complete directory service enumeration of zone .. This DNS server is configured to use information obtained from Active Directory for this zone and is unable to load the zone without it. Check that the Active Directory is functioning properly and repeat enumeration of the zone. The extended error debug information (which may be empty) is "". The event data contains the error. Event Type: Error Event Source: NTDS Replication Event Category: DS RPC Client Event ID: 2087 Date: 3/7/2010 Time: 10:40:28 AM User: NT AUTHORITY\ANONYMOUS LOGON Computer: ADC Description: Active Directory could not resolve the following DNS host name of the source domain controller to an IP address. This error prevents additions, deletions and changes in Active Directory from replicating between one or more domain controllers in the forest. Security groups, group policy, users and computers and their passwords will be inconsistent between domain controllers until this error is resolved, potentially affecting logon authentication and access to network resources.

  Read the article

• VirtualBox Issue: virtualbox changed my Computer Name's ip address in Windows

  - by suud

  I had installed virtualbox 4.2.2 in Windows 7. My Computer Name is: MY-PC My IP address (using ipconfig /all command) is: 192.168.1.101 My IP is dynamic and I set DNS to google dns (8.8.8.8) When I ping MY-PC, I got this result: Pinging MY-PC [192.168.56.1] with 32 bytes of data: Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 My virtualbox was not running and I expected the ip adress of MY-PC is 192.168.1.101, not 192.168.56.1 Then I run command: nbtstat -a MY-PC and I got this result: VirtualBox Host-Only Network: Node IpAddress: [192.168.56.1] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- MY-PC <00> UNIQUE Registered WORKGROUP <00> GROUP Registered MY-PC <20> UNIQUE Registered MAC Address = 08-00-27-00-60-B3 Local Area Connection: Node IpAddress: [0.0.0.0] Scope Id: [] Host not found. Wireless Network Connection: Node IpAddress: [192.168.1.101] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- MY-PC <00> UNIQUE Registered WORKGROUP <00> GROUP Registered MY-PC <20> UNIQUE Registered MAC Address = 94-0C-6D-E5-6D-5D So it seems virtualbox caused this problem. I want to know how to change back my Computer Name's ip address to 192.168.1.101 (or any ip address that set by my internet connection)?

  Read the article

• QoS for Cisco Router to Prioritize Voice and Interactive Traffic

  - by TJ Huffington

  I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

  Read the article

• QoS for Cisco Router to Prioritize Voice and Interactive Traffic

  - by TJ Huffington

  I have a Cisco 891W NATing Voice and Data to the internet over a 10mbit/2mbit connection. Voice traffic gets degraded when I upload large files. Pings time out as well. I tried to configure a QoS policy but it's basically not doing anything. Voice traffic still degrades when upload bandwidth gets saturated. Here is my current configruation: class-map match-any QoS-Transactional match protocol ssh match protocol xwindows class-map match-any QoS-Voice match protocol rtp audio class-map match-any QoS-Bulk match protocol secure-nntp match protocol smtp match protocol tftp match protocol ftp class-map match-any QoS-Management match protocol snmp match protocol dns match protocol secure-imap class-map match-any QoS-Inter-Video match protocol rtp video class-map match-any QoS-Voice-Control match access-group name Voice-Control policy-map QoS-Priority-Output class QoS-Voice priority percent 25 set dscp ef class QoS-Inter-Video bandwidth remaining percent 10 set dscp af41 class QoS-Transactional bandwidth remaining percent 25 random-detect dscp-based set dscp af21 class QoS-Bulk bandwidth remaining percent 5 random-detect dscp-based set dscp af11 class QoS-Management bandwidth remaining percent 1 set dscp cs2 class QoS-Voice-Control priority percent 5 set dscp ef class class-default fair-queue interface FastEthernet8 bandwidth 1024 bandwidth receive 20480 ip address dhcp ip nat outside ip virtual-reassembly duplex auto speed auto auto discovery qos crypto map mymap max-reserved-bandwidth 80 service-policy output QoS-Priority-Output crypto map mymap 10 ipsec-isakmp set peer 1.2.3.4 default set transform-set ESP-3DES-SHA match address 110 qos pre-classify ! fa8 is my connection to the internet. Voice traffic goes over a VPN ("mymap") to the SIP server. That's why I specified "qos pre-classify" which I believe is the way to classify traffic over the VPN. However even when I ping a public IP while saturating upload bandwidth, the latency is exceptionally high. Is this configuration correct? Are there any suggestions that might make this work for my setup? Thanks in advance.

  Read the article

• DNS slow after losing DNS Server

  - by Tim

  We have set up a small Windows Server 2008 R2 network with a domain controller which is also acting as the DNS server for the network (we opted to install DNS when setting up the domain). This network isn't connected to the Internet in any way, so all machines have been configured to use the IP address of the domain controller as their primary DNS and no secondary DNS server has been configured. If we shut down or unplug the network cable from the domain controller, DNS lookups become quite slow and the performance of the network suffers. For example, running a ping command using a hostname takes around 5-6 seconds to resolve the name. I presume this is because it is looking for the DNS, then falling back to some other method of resolving the names as the DNS server is now gone. All the machines have static IP addresses so we are considering just putting all entries in the HOSTS file of each machine. However, it would be nice to have a centralised DNS in case we one day change the IP of one of the machines. Is there a better way to speed this up?

  Read the article

• QoS basics on a Cisco ASA

  - by qbn

  Could someone briefly explain how to use QoS on Cisco ASA 5505? I have the basics of policing down, but what about shaping and priorities? Basically what I'm trying to do is carve out some bandwidth for my VPN subnets (in an object-group called priority-traffic). I've seen this Cisco QoS document, however configuring shaping and priority-queue don't seem to have any effects in my test. A full download of the linux kernel from kernel.org will boost a ping to a server via VPN sky high. Policing has been successful in passing this test, although it doesn't seem as efficient (I cap non-vpn traffic at 3 of my 4.5 megabits of bandwidth). Am I misunderstanding the results of the test? I think there is some simple concept I'm not grasping here. EDIT: Here is my config thus far (I have 4.5 megabits of bandwidth): access-list priority-traffic extended permit ip object-group priority-traffic any access-list priority-traffic extended permit ip any object-group priority-traffic access-list priority-traffic extended permit icmp object-group priority-traffic any access-list priority-traffic extended permit icmp any object-group priority-traffic access-list non-priority-traffic extended deny ip object-group priority-traffic any access-list non-priority-traffic extended deny ip any object-group priority-traffic access-list non-priority-traffic extended permit ip any any priority-queue outside queue-limit 440 class-map non-priority-traffic match access-list non-priority-traffic class-map priority-traffic match access-list priority-traffic class-map inspection_default match default-inspection-traffic policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp policy-map outbound-qos-policy class non-priority-traffic police input 2500000 police output 2500000 class priority-traffic priority service-policy global_policy global service-policy outbound-qos-policy interface outside

  Read the article

• Problems during an update of cPanel / WHM

  - by haron

  I ordered a Master WHM account with the couple CentOS / cPanel. whm-cpanel.eu.pn The installation is a fresh update of the basic services was necessary (had: WHM 11.15.0 cPanel 11.17.0 WHM X v3.1.0, Apache 1.3.37, PHP 4.4.7, MySQL 4.1.22). 1 / I started to update cPanel / WHM via the command: / scripts / upcp. Everything went well until the middle of installing the server stopped responding (or ping, or ssh). The installation appears to have continued alone to the end and after some time everything is back to normal (I do not know if there was a reboot) and my interface was updated (cPanel 11.24.4-R36167 - WHM 11.24.2 - X 3.9). 2 / Then I updated via the MySQL interface tweak this in WHM then the command: / scripts / mysqlup. Here everything went fine, no problem. 3 / Finally, I wanted to upgrade Apache 2.2 / PHP 5 and I used this command: / scripts / easyapache. After selecting all the packages and modules installation is started but the same as for point 1: the server did not answer more and this time the installation did not go through. Apache 2.2 is well spent (after the second try) but PHP has remained at 4. I tried several times the same operation without success. I do not think this is a memory problem, a free-m shortly before losing communications gave nothing alarming. By cons CPU time seemed to rise up. I reinstalled the machine again the trick, same problem! Whether via the WHM interface or by Shell, the installation stops short, for 15 minutes the machine is not responding and then everything returns to normal, but no update is done in PHP. Is there a known bug in this version of cPanel / WHM? Someone he met the same problem? If I compile Apache / PHP manually, without using the script easyapache is what I might encounter problems with cPanel later? Thank you!

  Read the article

• VMWare Server Windows 2008 NAT Problem

  - by David

  At my new job our workstations run Windows Server 2008. However, for the specific task for which I've been hired, I need to set up a couple Linux VMs. So I grabbed the free VMWare Server and created an Ubuntu image and a Slackware image. (The former to more closely mimic the production server, the latter because I'm more familiar with it.) For desktop security purposes I need to use NAT for the network access (I would have preferred bridged, but I'm told that would go against some policy here and my whole workstation would be sandboxed from the switch). However, I can't seem to get it working right. I can ping out from the VMs to LAN addresses as well as internet addresses. I can resolve DNS names. However, attempts to use a web browser or perform any kind of higher-level interaction like that just time out. Googling around yesterday led me to various workarounds that were similar, but didn't solve my specific situation. (For example, Norton firewall blocking the connection on the host, or even the Windows firewall.) I also saw some forum posts where people said it's a known issue with VMWare and Windows Server 2008 (and Windows 7). So far I haven't been able to find a suggestion that gets me past this roadblock. I'm really not very familiar with managing a Windows Server 2008 box, so it's possible there's just some security setting somewhere that I need to modify. Does anybody have any suggestions on where I should look? UPDATE: I'm now looking at the "Network and Sharing Center" on the host workstation and it shows "VMWare Network Adapter VMnet8" (which is what I'm using) as an "Unidentified network" with "No Internet access." Looks like I can't modify ICS under the group policy. Any suggestions on how to allow this connection to have internet access?

  Read the article

• Destination host unreachable - Windows Server 2008

  - by Doug

  Hi There, I'm working with a windows 2008 domain controller, which I'm having issues connecting to internet resources. A small bit of background, this is a 2008 domain controller that has been added into an existing Win 2k domain, with a goal of replacing the older computers. Both of the older controllers can still access internet resources, and so can all the clients. When I ping Google.ca from the new server, it does resolve to an ip address, but then says "Reply from 192.168.123.20: Destination host unreachable." I'm really at a lost now, I've checked and rechecked my ip configuration, the default gateway is my router, the primary DNS server is the my DC, and the secondary DNS is also my router. The DNS server on the domain has a forwarder added for the router as well. Everything on my local network works just fine, all my internal resources can be resolved. For the time being, I've stopped the Firewall service. I'm not 100% used to Server 2008 yet, but it might be a case of just missing something simple. Thanks for your time.

  Read the article

• Destination host unreachable - Windows Server 2008

  - by Doug

  Hi There, I'm working with a windows 2008 domain controller, which I'm having issues connecting to internet resources. A small bit of background, this is a 2008 domain controller that has been added into an existing Win 2k domain, with a goal of replacing the older computers. Both of the older controllers can still access internet resources, and so can all the clients. When I ping Google.ca from the new server, it does resolve to an ip address, but then says "Reply from 192.168.123.20: Destination host unreachable." I'm really at a lost now, I've checked and rechecked my ip configuration, the default gateway is my router, the primary DNS server is the my DC, and the secondary DNS is also my router. The DNS server on the domain has a forwarder added for the router as well. Everything on my local network works just fine, all my internal resources can be resolved. For the time being, I've stopped the Firewall service. I'm not 100% used to Server 2008 yet, but it might be a case of just missing something simple. Thanks for your time.

  Read the article

• Bridging Virtual Networking into Real LAN on a OpenNebula Cluster

  - by user101012

  I'm running Open Nebula with 1 Cluster Controller and 3 Nodes. I registered the nodes at the front-end controller and I can start an Ubuntu virtual machine on one of the nodes. However from my network I cannot ping the virtual machine. I am not quite sure if I have set up the virtual machine correctly. The Nodes all have a br0 interfaces which is bridged with eth0. The IP Address is in the 192.168.1.x range. The Template file I used for the vmnet is: NAME = "VM LAN" TYPE = RANGED BRIDGE = br0 # Replace br0 with the bridge interface from the cluster nodes NETWORK_ADDRESS = 192.168.1.128 # Replace with corresponding IP address NETWORK_SIZE = 126 NETMASK = 255.255.255.0 GATEWAY = 192.168.1.1 NS = 192.168.1.1 However, I cannot reach any of the virtual machines even though sunstone says that the virtual machine is running and onevm list also states that the vm is running. It might be helpful to know that we are using KVM as a hypervisor and I am not quite sure if the virbr0 interface which was automatically created when installing KVM might be a problem.

  Read the article

• Problem with PXE boot

  - by user70523

  Hi, I followed the following link for PXE boot, http://www.howtoforge.com/setting-up-a-pxe-install-server-on-ubuntu-9.10-p3 and I was able to ping the client from the server and also when I booted up the client It is getting the IP address from the server. But later,I got this error PXELinux 3.82 2009-06-09 . . . [other informations] !PXE Entry point found (we hope) at 9D3B:0109 via plan A UNDI code segment at 9D3B len 16C2 UNDI data segment at 933B len A000 Getting cached packet 01 02 03 . . . [other informations] TFTP prefix: Trying to load: pxelinux.cfg/ec5db4c0-74fe-d511-b9e7-3d9235afe5a1 Trying to load: pxelinux.cfg/01-00-17-31-b6-5e-a8 Trying to load: pxelinux.cfg/0A64491E Trying to load: pxelinux.cfg/0A64491 Trying to load: pxelinux.cfg/0A6449 Trying to load: pxelinux.cfg/0A644 Trying to load: pxelinux.cfg/0A64 Trying to load: pxelinux.cfg/0A6 Trying to load: pxelinux.cfg/0A Trying to load: pxelinux.cfg/0 Trying to load: pxelinux.cfg/default Unable to locate configuration file Boot failed: press a key to retry or wait for reset I have put all the files mentioned in the link in tftpboot. Can anyone explain what could be the problem. Thanks in advance

  Read the article

• Need Help Accessing the Vista Wampserver localhost from Virtual PC 2007 running an XP VM.

  - by Reg

  (I had posted this on stack overflow but it was suggested there that I post it here instead). I have a Vista laptop on which I'm running wampserver. I have Virtual PC 2007 setup with Windows XP running on the VM. My goal is to be able to use the XP VM to run IE6 to view the localhost in the Vista wampserver. I'm not interested in having the XP VM have any access to the internet -- only to my Vista wampserver's localhost. The vista wampserver works fine. As suggested on a blog I read, I installed the loopback adapter on Vista and I set the loopback to 192.168.21.1 and I set the xp vm ip to 192.168.21.2. I am able to successfully ping the vista-loopback adapter from the xp vm. I've turned the wampserver to "server online", and I've disabled the firewalls in both the vista host and the xp vm. But for some reason, I still can't seem to get the virtual XP to see the localhost on the vista wampserver. I've tried using the vista //name, and I've tried the ip 192.168.21.1 directly and with the port. For whatever its worth, I'm not able to see anything under the XM VM's network places (though I don't know if I'm supposed to be able to see anything). So at this point I'm stuck and I'm still not sure how to get this XP VM to "talk" to my vista wampserver localhost. Any advice on how to fix this problem is much appreciated. Thanks in advance for your help. -R

  Read the article

• DrayTek 2820 configuration using public IP addresses

  - by Kev

  I have a /29 range of public IP addresses assigned to me by my ISP. I'm trying to configure a SIP VOIP handset to register with my VOIP provider who recommend using public IP addresses rather than NAT. I have a DrayTek 2820 router flashed with the latest firmware and have configured my router as per DrayTek's FAQ at: How do I use a public subnet on the LAN (non-NAT operation ) ? My IP range is: xx.xx.94.16 -> xx.xx.94.23 This gives a usable range of: xx.xx.94.17 -> xx.xx.94.22 My router's public IP address is: xx.xx.94.17, the SIP VOIP handset is allocated xx.xx.94.18. I have a second internet connection and via that I can ping the handset. However for some reason I can't seem to get it to register with the provider. I tried adding a new Firewall filter to pass through from WAN to LAN: Source: ANY, Destination: xx.xx.94.18, UDP - Ports 1024 -> 65535 Out of interest I also tried opening port 80 to see if I could browse to the phone's admin web interface but no joy. I know that my ISP aren't blocking inbound service ports because I NAT Port Forwarded port 80 to one of my internal web servers and it rendered a test page I had set up. All the NAT settings are reset to factory defaults, i.e. there are no Port Redirection, DMZ Host, Open Ports or Address Mappings configured. The handset I'm using is a GrandStream GXP-2000. Is there anything else I should be doing?

  Read the article

• IPMI not fucntioning with Network Bonding

  - by muhammed sameer

  Hey, I am having problems with running IPMI on my servers that have network bonding enabled. Platform: CentOS release 5.3 (Final) Kernel: 2.6.18-92.el5 64bit Dell PowerEdge 1950 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet I have bonded the interface eth0 and eth1 as active passive, with eth0 as the active interface, below is conf description from /proc Bonding Mode: fault-tolerance (active-backup) Primary Slave: eth0 Currently Active Slave: eth0 MII Status: up MII Polling Interval (ms): 30 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth0 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:22:19:56:b9:cd Slave Interface: eth1 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:22:19:56:b9:cf My IPMI device is as follows IPMI Device Information Interface Type: KCS (Keyboard Control Style) Specification Version: 2.0 I2C Slave Address: 0x10 NV Storage Device: Not Present Base Address: 0x0000000000000CA8 (I/O) Register Spacing: 32-bit Boundaries I Have used openIPMI as well as freeipmi both to control the chassis via the IPMI card, but on servers which have bonding enabled, the command times out, below is the full run of the command with debug info. ipmi_lan_send_cmd:opened=[0], open=[4482848] IPMI LAN host 70.87.28.115 port 623 Sending IPMI/RMCP presence ping packet ipmi_lan_send_cmd:opened=[1], open=[4482848] No response from remote controller Get Auth Capabilities command failed ipmi_lan_send_cmd:opened=[1], open=[4482848] No response from remote controller Get Auth Capabilities command failed Error: Unable to establish LAN session Failed to open LAN interface Unable to get Chassis Power Status On the other hand I configured IPMI on a box with the same specs as mentioned above without bonding and IPMI works perfectly. Has anyone faced this problem with IPMI + Bonding ? I would be thankful is someone helps circumvent this issue. Muhammed Sameer

  Read the article

• EC2 Ubuntu - Force instance to use internal IP

  - by Peter

  I've just set up a micro instance on EC2 (AMI ID ami-e59ca991). I had hoped to avoid charges for a year as my usage falls well within the bound of the free tier. I have been charged $0.01 for "regional data transfer". I read here that this is because my instance is talking to its self via it's external IP address. From what I've Googled it looks like you can stop the charges by making sure that the instance uses its internal IP address. However, when I ping the hostname of my instance internally (via an ssh session) it resolves to the instances internal IP address. How can I configure my instance so that I do not get these charges? Is it as simple as adding a line to my hosts file? Additionally, is this the real reason for the charge? I'm concerned that I've misunderstood the pricing somewhere. I have Apace and MySQL (with phpmyadmin) running on the machine - could I be being charged for data transfer associated with these (I have only one flat HTML page and I have only logged in via phpmyadmin - I have no data in my database). Edit: Additionally, my user account on MySQL was declared as: grant all privileges on *.* to 'peter'@'localhost'; Should I have instead used the internal hostname for the instance? grant all privileges on *.* to '[email protected]'; Cheers, Pete

  Read the article

• PXE boot and DHCP server configuration Failing Auto Installation

  - by Harihara Vinayakaram

  I have a ISC DHCP Server installed on Ubuntu 9.10 . I have managed to successfully boot a PXE client , obtain a DHCP address and load the initrd.gz file. But I am facing a vague problem when the debian installer starts up and tries to get a DHCP server The client send a DHCP request and I verified that is the same MAC Address. But I get a DHCP DECLINE (The client declines the address ). It offers all the address in the pool and then there is a DHCP NAK (no more free leases ) I tried using the Option no-ping, and also option one-client-one-lease but it does not help . If I set the client to use a fixed-address then the above problem is not there and the installation proceeds smoothly Can you give me any clues on what should be the DHCP server configuration My dhcpd.conf looks like this { ddns-update-style none; option domain-name "hadoop-myorg.org"; option domain-name-servers 192.168.3.5; default-lease-time 600; max-lease-time 7200; group { filename "pxelinux.0"; next-server 192.168.13.184; host hadoop1 { hardware ethernet 90:e6:ba:d5:53:f8; } } subnet 192.168.13.0 netmask 255.255.255.0 { option routers 10.0.0.254; pool { option domain-name-servers 192.168.3.5; max-lease-time 3000; range 192.168.13.55 192.168.13.65; deny unknown-clients; } } }

  Read the article

• ./rtnet start rteth0-mac: unknown interface: No such device ioctl: No such device

  - by Anisha Kaul

  I have installed the RTnet over Xenomai. RTnet compiled well, and I also tested loopback on the single machine and was able to ping. However I noticed ./rtnet start showing the following output: What should I interpret when all it says is "no such device"? What more info should I provide here for you to help me in getting rid of this error? linux-y3pi:/usr/local/rtnet/sbin # ./rtnet start rteth0: unknown interface: No such device rteth0-mac: unknown interface: No such device ioctl: No such device ioctl: No such device ioctl: No such device ioctl: No such device ioctl (add): No such device vnic0: unknown interface: No such device SIOCSIFADDR: No such device vnic0: unknown interface: No such device SIOCSIFNETMASK: No such device Waiting for all slaves...ioctl: No such device ioctl: No such device linux-y3pi:/usr/local/rtnet/sbin # lsmod: linux-y3pi:/usr/local/rtnet/sbin # lsmod Module Size Used by tdma 18281 0 rtmac 9274 1 tdma rtcfg 49485 0 rtcap 7216 0 rt_loopback 1563 2 rtpacket 5517 0 rtudp 10655 0 rt_8139too 11374 0 rtipv4 22842 2 rtcfg,rtudp rtnet 42130 9 tdma,rtmac,rtcfg,rtcap,rt_loopback,rtpacket,rtudp,rt_8139too,rtipv4 ip6t_LOG 8480 6 xt_tcpudp 3540 2 xt_pkttype 1176 3 ipt_LOG 8201 6 xt_limit 2159 12 snd_pcm_oss 44878 0 snd_mixer_oss 15151 1 snd_pcm_oss snd_seq 55731 0 s nd_seq_device 6698 1 snd_seq edd 8407 0 ip6t_REJECT 4306 3 nf_conntrack_ipv6 8186 4 nf_defrag_ipv6 10128 1 nf_conntrack_ipv6 ip6table_raw 1451 1 xt_NOTRACK 1112 4 ipt_REJECT 2397 3 xt_state 1314 8 iptable_raw 1478 1 iptable_filter 1706 1 ip6table_mangle 1756 0 nf_conntrack_netbios_ns 1678 0 nf_conntrack_ipv4 8957 4 nf_conntrack 80411 5 nf_conntrack_ipv6,xt_NOTRACK,xt_state,nf_conntrack_netbios_ns,nf_conntrack_ipv4 nf_defrag_ipv4 1561 1 nf_conntrack_ipv4 ip_tables 18872 2 iptable_raw,iptable_filter ip6table_filter 1679 1 ip6_tables 19066 4 ip6t_LOG,ip6table_raw,ip6table_mangle,ip6table_filter x_tables 24094 16 ip6t_LOG,xt_tcpudp,xt_pkttype,ipt_LOG,xt_limit,ip6t_REJECT,ip6table_raw,xt_NOTRACK,ipt_REJECT,xt_state,iptable_raw,iptable_filter,ip6table_mangle,ip_tables,ip6table_filter,ip6_tables fuse 69279 3 loop 17417 0 dm_mod 71671 0 snd_hda_codec_via 57768 1 snd_hda_intel 24871 2 snd_hda_codec 95006 2 snd_hda_codec_via,snd_hda_intel snd_hwdep 6540 1 snd_hda_codec snd_pcm 90716 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec snd_timer 22050 2 snd_seq,snd_pcm snd 71410 14 snd_pcm_oss,snd_mixer_oss,snd_seq,snd_seq_device,snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer soundcore 7854 1 snd iTCO_wdt 11716 0 iTCO_vendor_support 2942 1 iTCO_wdt snd_page_alloc 8324 2 snd_hda_intel,snd_pcm sr_mod 13186 0 cdrom 37628 1 sr_mod i2c_i801 9677 0 pcspkr 1950 0 sg 28847 0 serio_raw 4534 0 ext4 361361 2 jbd2 82943 1 ext4 crc16 1699 1 ext4 i915 500199 2 drm_kms_helper 33537 1 i915 drm 211193 3 i915,drm_kms_helper sd_mod 33977 5 i2c_algo_bit 5625 1 i915 intel_agp 11529 1 i915 intel_gtt 16397 3 i915,intel_agp ata_generic 3787 0 ata_piix 22875 4 ahci 20097 0 libahci 22089 1 ahci libata 194812 4 ata_generic,ata_piix,ahci,libahci scsi_mod 204709 4 sr_mod,sg,sd_mod,libata linux-y3pi:/usr/local/rtnet/sbin #

  Read the article

• rr.com appended to URL and I don't know why

  - by Steph

  I've been having some pretty bad and intermittent internet connectivity issues. I keep getting timeouts on my browsers, or what appears to be timeouts on my browsers. In Chrome it's generally error 21. FF it times out. And so on. While this is happening, I can go into the command line and ping or traceroute the same domain and it works fine. I use my cellphone on the same network and it's fine connecting to the same domain. And when it fails, it's all domains that are down in all browsers, chrome, FF, etc. I also noticed that when I try to connect to 192.168.1.1 it says in chrome did you mean www.192.168.1.1rr.com but when I enter https://192.168.1.1 it's fine. It only seems to do this in Chrome. This is making me think I have a virus. I did some researching about something called road runner, but I can't find any related traces. I also ran a full virus scan using nod32 (eset) and nothing. Any suggestion or help would be greatly appreciated. The intermittent loss of total internet access is really annoying and I'm worried about why it's trying to append the rr.com domain in Chrome. I suspect I'm dealing with two different issues, but you never know. Also for the DNS I'm using Google's DNS servers, the famous 8.8.8.8 and 8.8.8.4

  Read the article

< Previous Page | 78 79 80 81 82 83 84 85 86 87 88 89  | Next Page >