Search Results

Search found 20336 results on 814 pages for 'connection strings'.

Page 83/814 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

• Belking Wireless Router unable to connect to internet although wireless connection is working

  - by ptamzz

  I have a Belkin Basic N150 Wireless router. I'm trying to set up wireless connection using the wired ports my university has provided in my hostel room. Usually, when I connect my laptop using a LAN wire through the port, my settings are like IP: 10.5.130.X Subnet Mask: 255.255.254.0 Default Gateway: 10.5.130.250 DNS Server: 10.200.1.11 and I'm able to connect to the internet. Now instead of connecting my laptop directly, I've connected the lan wire to the Belkin Wireless Router, set the router as "Use as an Access Point" and in the IP field, I've put up 10.5.130.1. Now I've set the IP of my system manually to 10.5.130.3. I'm able to connect to the wi-fi but I'm still not able to connect to the internet. What am I missing?

  Read the article

• Windows/Samba connection error

  - by Gomibushi

  I have a Linux fileserver serving up /home for linux and windows users. I was able to connect from my windows client, but not from a DC. Then suddenly I could connect from the DC too. The linux servers run Centrify clients, and as such are part of the domain. All on same subnet. This is what the the log.smbd says, repeatedly: [2010/02/11 11:25:57, 0] lib/util_sock.c:read_data(534) read_data: read failure for 4 bytes to client 192.168.200.3. Error = Connection reset by peer On Windows it appeared as an "unknown error". EDIT: the error code is "0x80004005". We are developing a system depended on the samba share, and are worried this will appear again. It would be nice to pin point the root of this. Any ideas what this might be? Places to look?

  Read the article

• Remote desktop connection issues in windows server 2003

  - by rboorgapally

  Hi all, We are running windows server 2003 at our work place. I have enabled the remote desktop connections. I have also added all the users who connect to the server(three to four people) to the RDC group of users. Many of these users are also having Administrator access. The problem we are facing is that the connection is suddenly lost when we are working on something. Also, at times the system restarts by itself. Is this issue related to the limit on the number of users able to connect to the system? If so, why does the system accept new connections and/or terminate the existing connections? Has this anything to do with the users having administrator access so that all have equal prority and that is why existing connections are stalled? Also, please differentiate between console remote desktop and non console remote desktop.

  Read the article

• Limited connection whenever I connect to a Wi-Fi network outside the company

  - by anderZubi

  Whenever I connect my work laptop to a wireless network outside of my company, the connection shows as Limited, and there is no internet access. I have tried several times by disabling/enabling the network adapter, restarting the computer... without success. Sometimes, after a while, without taking any action, it shows fine, and I have internet access. But can pass 2 hours before this happens. My computer is under a domain network, but I don't think that's the problem, because I can successfuly connect other computers belonging to same domain to other networks. I'm running Windows 8 Pro and my network adapter is the following: Qualcomm Atheros AR9285 Wireless Network Adapter Any idea of which is the problem and how to solve it?

  Read the article

• Sharing Internet Connection in Windows 7 is so much more frustrated than Windows XP

  - by Phuong Nguyen

  Back to the time of Windows XP, from Properties dialog of my Wireless Connection, I can enable sharing and then select LAN network from the Drop Down List and boom, I can share it with my friend. We just need a LAN cable (either cross or not-cross is OK) and his Laptop will get an auto IP to gain access to internet. But now with the new Windows 7, everything starts to suck. I cannot see the Drop Down List any more in the sharing panel and my friends Laptop cannot get an automatic IP anymore. Am I doing anything wrong over there? How can I gain back the peace I used to have with Windows XP?

  Read the article

• Always use one slow connection in preference of a "faster" one

  - by billc.cn

  In Windows, there's this automatic metric thing where the metric is selected according to the declared speed of the link. I now have a gigabit LAN routed to a 2MB DSL service and a HSDPA mobile broadband connection. The former is always chosen for Internet packets even though the latter is actually faster. I tried setting the mobile broadband's interface metric to 1 and raising its priority in the advanced settings of the adapter settings, but this does not seem to affect the metric of the default route. The default route to the Ethernet interface always have a lower metric than the mobile broadband interface. Am I missing something here?

  Read the article

• Does anyone provide a Skype connection service?

  - by Runc

  Is there a way of offering Skype access to incoming calls while keeping all telephony traffic over our chosen business telephony provision? Is there a 3rd party who can route incoming Skype calls to our telephone system? The business has had requests from contacts wanting to call us via Skype, but we want to keep all telephony via our PBX and phone lines as our geographic location limits our available internet bandwidth. We also prevent installation of non-standard applications on desktops and do not want to add Skype to our build. I was wondering if there were any 3rd parties that provide a connection service that would allow our contacts to call via Skype and us receive the calls via our phone system.

  Read the article

• Set up ad hoc wireless connection between Windows Vista and Mac OS X

  - by Skarab

  I have the following problem - Windows Vista does not connect to adhoc wireless network created on my Macbook. I have tried to create secured (with 40 bit key) and unsecured network but Windows Vista still has problems to connect. Windows VISTA informs me -- after 5 minutes of attempts - that setting up the connection -- with my adhoc network -- took too much time. My question: do I need to configure some settings on Vista to connect it to my Macbook? Maybe it is a problem with DHCP? Edited: I have tried the other way: http://superuser.com/questions/202890/set-up-an-adhoc-network-in-windows-vista-to-connect-to-and-share-the-internet-con

  Read the article

• Sharing Internet Connection in Windows 7 is so much more frustrated than Windows XP

  - by Phuong Nguyen

  Back to the time of Windows XP, from Properties dialog of my Wireless Connection, I can enable sharing and then select LAN network from the Drop Down List and boom, I can share it with my friend. We just need a LAN cable (either cross or not-cross is OK) and his Laptop will get an auto IP to gain access to internet. But now with the new Windows 7, everything starts to suck. I cannot see the Drop Down List any more in the sharing panel and my friends Laptop cannot get an automatic IP anymore. Am I doing anything wrong over there? How can I gain back the peace I used to have with Windows XP?

  Read the article

• non-GUI connection to local Hyper-V VM without network

  - by sandro

  I have a virtual machine on Hyper-V manager (Windows 2008 R2) without a network configured on the VM. From a powershell script running on the host Windows server, I would like to query into the OS of that local VM for certain information (i.e. if a given process has finished completion). I am using codeplex's pshyperv module (https://pshyperv.codeplex.com/) to interact with Hyper-V manager, but the only cmdlet to connect to the vm is 'New-VMConnectSession', which launches a 'vmconnect.exe' connection to the VM. Since vmconnect.exe is essentially RDP, this is not very script-friendly. From within a host's powershell script, is there any way to send a command to a local virtual machine's OS and receive output, if no network is configured on the VM? (I believe Vmware's 'vmrun' utility has this capability) Another way to ask this question: Does Hyper-V have a non-GUI-based form of vmconnect.exe? (PS. Not sure if this was more stackoverflow or serverfault)

  Read the article

• webm html5 videos lose connection with apache server

  - by Jizbo Jonez

  webm html5 videos that are played through a domain on my server sometimes lose connection. A video that is playing will start to buffer and then stop part of way through with that message "Video playback aborted due to a network error." displayed on the html5 video player. I am delivering the webm videos via a php script on an LAMP server. There doesn't seem to be any errors in the server logs. Is there any php.ini settings or httpd.conf that I need to set? I recently set 'Keep Alive" to "on" in httpd.conf could that be causing this?

  Read the article

• Apache 2.4 and PHP 5.4 getting connection reset errors in the browser

  - by zuallauz

  In the weekend I upgraded my development web server to Apache 2.4 and PHP 5.4. In my web application which was previously working great on Apache 2.2 and PHP 5.3 it now starts getting these messages saying the "connection was reset" in Firefox. See screenshot. I am connecting to the linux machine via local LAN. I'm assuming it might be something to do with the new version of Apache or PHP, or the new LAMP stack which I downloaded from BitNami? It would seem to happen every 5-10 requests and throw this error, perhaps more likely to trigger it is if I send a POST request from a page. Is it timing out the script or something? These are just basic dynamic pages I'm loading and they worked perfectly in Apache 2.2 and PHP5.3. Here are my httpd.conf and PHP.ini if that has any clues. Any ideas? Any help much appreciated.

  Read the article

• Sharing a wifi connection between different user profiles on Windows XP

  - by crowne

  I've set-up two separate user profiles on an old laptop running Windows-XP, and noted the following strange behaviour. When the wireless network is setup using WEP both user profiles can connect to the internet and I can switch between user profiles, without network connectivity issues. However when I changed the wireless security to WPA2, the first user to connect gets access to the internet, when switching to the second profile the connection fails. The behaviour is the same regardless of which of the two profiles logs on first. I also tried this with one user with admin rights and one without, and got the same result. I'm not too concerned about a fix for this other than forcing the users to log-off when sharing the laptop, but I'd be interested to know if anyone can corroborate my findings. The network config was done using Intel® PROSet/Wireless.

  Read the article

• Plesk 10 port 8443 connection timeout

  - by GriffinHeart

  I've installed plesk 10 on centOS and after installing to access the cp you need to go https::8443 I'm not being able to, and would like to find out why i can ssh to the server and i can, from the server telnet, to those ports. from another machine i can ping it but when i try to telnet or go to that address i get connection timeout, happens with port 80 and 8443 from my netstat netstat -nlp | grep 8443 tcp 0 0 :::8443 :::* LISTEN 25205/sw-cp-serverd How do i find out whats causing the problem? I also have a router but firewall is at the minimum and the server configured as DMZ, also tried to redirect 8443 to 8443 of the server.

  Read the article

• Windows Firewall allows connection from any IP regardless of rule that only allow a specific IP

  - by Pierre-Alain Vigeant

  I have configured the Windows Firewall to Block (default) incoming connection on the public profile. I have created a rule for a port (in this case, this is Sql Server) that explicitly states that only my office static IP is allowed. If I test from my office, I am able to connect to the port. I was expecting that anybody outside the office would not be able to connect, but this is not the case. I asked a friend to telnet the port to see if it would reply and it does even if he's not on my network. I am a bit confuse here. Shouldn't it block everybody but the given IP? Is my server completely unsecured?

  Read the article

• Plesk 10 port 8443 connection timeout

  - by GriffinHeart

  I've installed plesk 10 on centOS and after installing to access the cp you need to go https::8443 I'm not being able to, and would like to find out why i can ssh to the server and i can, from the server telnet, to those ports. from another machine i can ping it but when i try to telnet or go to that address i get connection timeout, happens with port 80 and 8443 from my netstat netstat -nlp | grep 8443 tcp 0 0 :::8443 :::* LISTEN 25205/sw-cp-serverd How do i find out whats causing the problem? I also have a router but firewall is at the minimum and the server configured as DMZ, also tried to redirect 8443 to 8443 of the server.

  Read the article

• Home folder only SFTP connection has limited access

  - by Tomasz Durka

  I have configured sftp access for user using this guide: Linux shell to restrict sftp users to their home directories? I have problem though. I have taken all steps. I have chown'ed root:user the home folder and I set permissions to 755. I can login normally using SFTP, however I can NOT transfer files, can NOT mkdir directories. If I change permissions to 777 it's ok do edit everything. However this is the thing I don't want. Additionally after exiting sftp and reconnecting then connection is reset by peer (due to setting 777). Anyone had similar problem? What I am doing wrong?

  Read the article

• Router loses connection to internet randomly

  - by tvanover

  I have a Belkin wireless G plus Mimo router and it randomly loses the connection to the internet. It seems to happen for a second or two, not enough to impact day to day browsing. But enough to disconnect games, or stall videos I am watching. It happens whether I am plugged into the router or connecting via wifi. I am unsure if it is my router or Comcast that is causing this issue. If I connect a computer directly to the modem the problem never occurs, so that tells me it is probably the router. But I also had a Netgear wireless router WGR614, and it had the same problem. I don't know where to start looking for the source of the problem. What logs should I be combing through? All my machines are win 7 of varying versions.

  Read the article

• "DNS not responding" error with D-Link router and PPTP internet connection

  - by Born2win

  I have a D-Link DIR-615 router since around six months. My internet connection is VPN (PPTP) based, i.e. I have been given a username and password from my ISP and my IP address is dynamic. Since a few days I am experiencing a serious problem. My router connects normally (I can see the yellow light), but my computer is giving me a "DNS not responding" error. I have tried everything (reset, reboot etc.) but no success.

  Read the article

• hyper-v server 2003 instance using internet connection sharing disconnects remote desktop to hyper-v host

  - by Joseph Southwell

  I have a windows server 2003 R2 instance running in a hyper-v instance on windows 8. I have setup an internal switch that uses internet connection sharing to get out to the internet. It works fine except for when I try to do windows update on the server 2003 instance it disconnects my remote desktop session to the windows 8 hyper-v host. When I reconnect it says windows update failed. I know that sounds crazy but I have tested it over and over again. If I change the instance to use my external switch (I have an external switch defined on another network adapter) windows update works fine.

  Read the article

• Configure sendmail to accept connection from one other IP address

  - by Kumala

  I have a RubyOnRails application running on the same server that runs sendmail. The application sends out (no need to receive) emails via the local sendmail. Now I intend to move sendmail to a dedicated server. How do I make sendmail on that server accept connections from my application on the other server? I modified sendmail.mc from DAEMON_OPTIONS(`Family=inet, Name=MTA-v4, Port=smtp, Addr=127.0.0.1')dnl to DAEMON_OPTIONS(`Family=inet, Name=MTA-v4, Port=smtp')dnl I have also added to /etc/mail/access: Connect:198.211.117.41 RELAY then ran m4 sendmail.mc > sendmail.cf and restarted sendmail. Trying to connect from my app server with telnet on port 25 to the mail server gives me: telnet: Unable to connect to remote host: Connection refused Am I missing something?

  Read the article

• DIR-615 lose internet connection after 3 minutes

  - by Sirber

  I got a new DLink DIR-615 routeur. DSL model connects fine. Connected PCs connects to the internet fine (wireless, wired) fine too. After ~3 minutes, connected PCs cannot go to the internet. Web pages goes timeout, sometimes google talk stays on (working). From the router admin page, pings works correctly (on google.ca), so the connection is active. pc -- routeur -- internet: fail pc -- router: ok router -- internet: ok could it be firewall related? I've read there's a SPI firewall enabled.

  Read the article

• Windows Server 2008 SOMETIMES blocks connection to an FTP Site

  - by ssilver2k2

  Hello Everyone Recently, our company has been having issue connecting to a special FTP server that we use offsite to upload small files. We can connect to the test server perfectly fine, but when we use the production ftp, it only randomly connects. If I plug my laptop directly into the modem and pull one of our other static IP addresses, I can connect just fine, but if I use our internal network, it is hit or miss. Also, turning OFF the firewall does NOT change the status of our connection problems. It will still time out. The weird issue is that it sometimes works, and when it does, it instantly asks for credentials and logs us on for that session, but if we disconnect and try again, it may or may not work. This also coincidentally occurred after uninstalling hamachi, and it blew away our internet settings on our Windows Server 2008 box, but everything else is working fine, and it was working fine before hamachi was installed.

  Read the article

• Win 7: Share internet connection via Ethernet and WiFi

  - by Anvaka

  I have the following configuration: Box 1. Running Win 7, connected to the internet via Eth0. Has one wireless network adapter and one more ethernet adapter (say, Eth1). Box 2. Running Win XP, has one ethernet adapter. I'd like to share Internet connection of the Box 1 with Box 2 via cable and have box 1 also sharing the Internet with other wireless devices. I don't want to buy any additional hardware. Is it possible? PS: Sorry if I'm unclear. I merely know nothing about NAT and network administration

  Read the article

• Win 7: Share internet connection via Ethernet and WiFi

  - by Anvaka

  I have the following configuration: Box 1. Running Win 7, connected to the Internet via Eth0. Has one wireless network adapter and one another ethernet adapter (say, Eth1). Box 2. Running Win XP, has one ethernet adapter. I'd like to share Internet connection of the Box 1 with Box 2 via cable and have box 1 also sharing the Internet with other wireless devices. I don't want to buy any additional hardware. Is it possible? PS: Sorry if I'm unclear. I merely know nothing about NAT and network administration.

  Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >