Search Results

Search found 3193 results on 128 pages for 'reboot'.

Page 83/128 | < Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >

  • How to change the screen resolution in VNC viewer for Ubuntu 12.04 without a monitor?

    - by user325320
    I have Ubuntu 12.04 installed on a machine and I always use it remotely from VNC. When I have monitor connected to this machine, I can change the resolution of my VNC viewer in the following line: $vnc4server --geometry 1440x900 This worked for me, but I always use this machine remotely, I unplug the monitor and reboot. and the above command line not work anymore. Then I tried xrandr SZ: Pixels Physical Refresh *0 1024 x 768 ( 260mm x 195mm ) *60 Current rotation - normal Current reflection - none Rotations possible - normal Reflections possible - none There is only one option available, so I tried to add a new one. $cvt 1440 900 # 1440x900 59.89 Hz (CVT 1.30MA) hsync: 55.93 kHz; pclk: 106.50 MHz Modeline "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync $xrandr --newmode "1440x900_60.00" 106.50 1440 1528 1672 1904 900 903 909 934 -hsync +vsync $xrandr --addmode S2 "1440x900_60.00" then I checked with xrandr again and can't see the new mode added. I try to execute the following command and get error says my RandR is too old. $xrandr --output S2 --mode 1440x900_60.00 xrandr: Server RandR version before 1.2 but this does not make sense to me, if I plug in the monitor back and run the xrandr command, it works again! It seems that Ubuntu must conntect to a real monitor before I can change my resolution in my VNC viewer. Can anyone help? UPDATE: Finally I solved this problem by changing to tightvncserver $tightvncserver -geometry 1440x900 works for me. Thanks everything answered my question

    Read the article

  • Ubuntu Studio Audio Issue with Alsa - No sound

    - by ddragon
    Spec: OS: Ubuntu Studio 13.10 64bit CPU: AMD FX 4100 Quad Core Memory: 6GB DDR3 Video: Radeon HD 4250 (embedded on the mobo) Sound: Delta 66 PCI Issue: I just installed Ubuntu Studio and found out that the streaming audio on a few common website such as Youtube had no sound, and also my CD/DVDs via a player. Thus, in the terminal, I entered: sudo alsa force-reload It actually worked but the sound/audio output was MONO and NOT Stereo (the sources are set to stereo stereo), and it seemed I was not able to locate any settings that can switch the output sound to stereo at all. I went through many forums and eventually "autoremove" pulseaudio since many said I would not be able to utilize both pulseaudio and alsa in this case. Now, I have no audio whatsoever. Does this version of Ubuntu only offer mono sound/audio no matter what I do? Then, I may just need to ditch the whole thing and go back to Windows, which I don't want to since Ubuntu Studio offers many great apps, soundfonts etc.. I have also installed restricted extra, but even after rebooting, it did not resolve the issue. In the terminal mode, I pulled "alsamixer" and unmuted almost everything. But still no sound after a reboot. Just an FYI, I have no saved data under this version of Ubuntu Studio yet, so please feel free to let me know whether I need to install Studio 12.10 instead or mess with some installing/uninstalling apps/plug-ins, etc... If it breaks at some point, all I need to do is to re-install it, which I do not mind at all. Or, if you can provide me a step by step instruction to get this work, I do not mind clean install the Studio 13.10 then wait for your instruction AT ALL!

    Read the article

  • Workflow: Operate Zones

    - by Owen Allen
    The Operate Zones workflow is another of the workflow documents that we introduced recently. It follows naturally after the Deploy Oracle Solaris 11 Zones workflow that I talked about last week, so I thought I'd talk about it next. This workflow is less linear than the zone deployment workflow. It's built around this image: The left side shows you the prerequisites for zone operation: you have to deploy libraries and deploy either Oracle Solaris 10 or 11 zones - whichever type you want to manage using this workflow. Once you have the zones deployed, you can begin to operate them. If you want to associate resources with the global zone, the workflow directs you to the Exploring Your Server Pools how-to, which talks about adding global zones to server pools and associating libraries and network resources with them. Otherwise, it directs you to a set of how-tos about zone management: Managing the Configuration of a Zone, which explains how to add storage, edit zone attributes, and connect zones to networks; Lifecycle Management of Zones, which explains how to halt, shut down, boot, reboot, or delete a zone; and Migrating Zones, which explains how to move a zone to a new global zone in the same server pool. Finally, it directs you to the Update Oracle Solaris workflow when you want to update your zones, and to the Monitor and Manage Incidents workflow to learn more about monitoring your assets.

    Read the article

  • Turning on the wireless card freezes Ubuntu 12.04

    - by Ryan Schram
    I've been using Ubuntu 12.04 for close to a year. Occasionally after booting into Gnome 3, the desktop is unresponsive to cursor clicks. The mouse cursor moves but can't open menus. Also the network icon displays a red error badge instead of the usual gray x indicating that it is off. The only way I have found to solve this is to switch to a terminal shell (Ctrl-Alt-F5), login and kill gnome-session. This is an intermittent and occasional problem. Recently I moved house and set up this computer in my new apartment. Now I have for the first time a new and more difficult problem. Switching on the wireless card (wlan0) to connect to the wifi router causes the desktop to freeze. Switching to a terminal via Ctrl-Alt-F5 doesn't work. The only solution is a hard reboot from the power switch. How can I diagnose the second, more recent problem? Is there a solution? Cheers, Ryan

    Read the article

  • How To Auto Add To /etc/resolv.conf?

    - by Volomike
    On Ubuntu 10.04 Server, you can edit a file and it will automatically add a nameserver to the /etc/resolv.conf on boot. Unfortunately, Ubuntu 10.04 Desktop does not have this feature that I'm aware of, although perhaps I could be wrong. See, as a web developer, I replace my localhost domain with "me.com" (since I never use me.com) in my /etc/hosts file. So, I can visit my own web server this way. But since my /etc/resolv.conf doesn't have nameserver 127.0.0.1 in it, every lookup has to go out to my slow ISP DNS lookup and then back. So, I edit the file manually, but every time I reboot, the connection gets lost, and every time my ISP has troubles and my system renegotiates afterwards, I have to type this entry in again. Oh, and I prefer that the nameserver 127.0.0.1 be first, not last. Note without this entry, every connection to me.com is slow. With this entry, my connection to me.com is super fast. Is there a way to automatically do this on boot?

    Read the article

  • Update to 13.10: blank screen and repeated suspend on resume from suspend

    - by user208026
    On my Asus x201e, after updating from 13.04 to 13.10, intermittently when awaking from suspend, my screen will blink to a black screen a few times, offers a lock screen, and then go back to suspend unexpectedly (during this it is possible to quickly login to the desktop before the system suspends again). This will repeat each time I subsequently awake it from suspend. Only a restart will escape the suspend loop. The problem only occurs when suspending by closing lid, not by manual (pm-suspend) or menu suspend. Opening the lid after a manual or menu-initiated suspend works as expected. When an external monitor is attached, the black screen and second lock screen still appear twice upon wake, but the system does not fall back into suspend (though networking is disabled and needs to be restarted). This issue arose in tandem with the already raised issue regarding networking not restarting on wake from suspend, though appears to be distinct from that issue and persists after a fix is applied for the networking issue. This issue only occurs on waking from suspend, never upon booting. And only on the second suspend cycle after reboot. This question duplicates the second, unanswered question included in this closed question and seems to correspond with this reported bug. Any ideas for a workaround?

    Read the article

  • CodePlex Daily Summary for Monday, October 07, 2013

    CodePlex Daily Summary for Monday, October 07, 2013Popular ReleasesGhostscript.NET: Ghostscript.NET v.1.1.0.: v.1.1.0. added GhostscriptViewer state handling (SaveState, RestoreState) GhostscriptRasterizer constructor is extended in order to support usage of the existing GhostscriptViewer instance. fixed problem while using a 32-bit assembly with 32-bit version of Ghostscript on 64-bit Windows: It couldn't find a registry key of installed Ghostscript. Reported and fixed by "r0land". v.1.0.9. implemented EPS (Encapsulated PostScript) support for the GhostscriptViewer. added GhostscriptRasterize...Ghostscript Studio: Ghostscript.Studio v.1.0.2: Ghostscript Studio is easy to use Ghostscript IDE, a tool that facilitates the use of the Ghostscript interpreter by providing you with a graphical interface for postscript editing and file conversions. Ghostscript Studio allows you to preview postscript files, edit the code and execute them in order to convert PDF documents and other formats. The program allows you to convert between PDF, Postscript, EPS, TIFF, JPG and PNG by using the Ghostscript.NET Processor. v.1.0.2. added custom -c s...cmdradio: v0.1.1 binary: Default download in win32. For other OS see here. This is alpha version. Please report all bugs.Media Companion: Media Companion MC3.579b: Fixed IMDB actor scraping for Movies and TV. Note: there are a couple of new functions that are not active, as this release needed to be done due to IMDB change. New* TV - context menu for rescrapeing Poster image/Banner image Fixed* Both - Fixed actor scraping from IMDB * Movie - Fixed Tableview if Movie's movieset was not in MC's list of moviesets * Movie - Rename with mediainfo now lowercase. * Both - added ignore "A " in titles. Separate option in General Preferences. * Tv - Changing ...VidCoder: 1.5.7 Beta: Updated HandBrake core to SVN 4819. About dialog now pulls down HandBrake version from the DLL. Added a confirmation dialog to Stop if the encode has been going on for more than 5 minutes. Fixed handling of unicode characters for input and output filenames. We now encode to UTF-8 before passing to HandBrake. Fixed a crash in the queue multiple titles dialog. Added code to rescue tool windows which get placed outside of the visible screen area.Wsus Package Publisher: Release v1.3.1310.05: Enhance the "Reboot Remote Computers", by adding a timer before the reboot occure. So that remote users can save their documents and close applications. You can also add a message to be display. In 'Tools'->'Settings'-> Misc Tab, you can set a default message. Enhance the "Compare Computers against AD", by choosing OUs to include in the comparison.Event-Based Components AppBuilder: AB3.Iteration.53: Iteration 53 (Feature): Allow drag&drop of existing component (flow, step) from component list to chart. Duplicate names are automatically recognized and solved. By the color of the draged component you can see what kind of component (flow or step) is currently draged. New: AddExistingComponentFlow, PartDragDropEventHandler, ExistingStepPreparerPulse: Pulse 0.6.7.3: Pulse is now accepting donations. To donate by Bitcoin or PayPal see https://pulse.codeplex.com/wikipage?title=Donations Lots of updates in v0.6.7.3: (Feature) New option allows you to disable wallpaper changing when a full screen application is running. This way Pulse doesn't slow down/lag your videos and games :) (Fix) Some users were getting Wallbase errors when logging in. This has been fixed. (Feature) Right click a provider and you can now make a copy of it by selecting the "Dupl...MoreTerra (Terraria World Viewer): MoreTerra 1.11.1: Release 1.11.1 =========== =Bug Fixes= =========== Added more tile blocks (Clouds, crimstone) Added items (binoculars, rope, Pirahna Gun) Added ores (Lead, Tin) Chests now work, I broke them yesterday. =============== =Known Issues= =============== I am having trouble with new background walls. So you will see a red outline for crimson then a pink inside. Same with where I think the queen bee lives.VG-Ripper & PG-Ripper: PG-Ripper 1.4.19: NEW: Added Option to login as Guest NEW: Added Menu Option to delete an Forum Account NEW: Added Support for "ImageTeam.org links FIXED: Fixed Ripping of http://forum.babeunion.com ForumsSingle Line Diagram (Electrical) Control Library: Single Line Diagram (Electrical) Control Lib - 1.2: In this release of SLD (Electrical) Control Lib I have fix code for the following symbols... 1. Switch 2. Isolator 3. Lightening Arrestor 4. Meter A new symbol is added for "Pothead Terminal" You can give it a try. I will keep improving and posting the new features.State of Decay Save Manager: Version 1.0.4: Add version at bottom of formCollection Commander for Configuration Manager 2012: CMCollCtr_1.0.0.2: Windows Installer (MSI) setup;New Ribbon Toolbar implemented; more Powershell commands...Classic WiX Burn Theme: Classic WiX Burn Theme 1.0: Project Description A WiX Burn theme inspired by the classic WiX wizard user interface.QuickConverter: QuickConverter 0.7.3 Beta: Allows access to external variables from inside lambda expressions.DNN® Form and List: DNN Form and List 06.00.07: DotNetNuke Form and List 06.00.06 Changes to 6.0.7•Fixed an error in datatypes.config that caused calculated fields to be missing in 6.0.6 Changes to 6.0.6•Add in Sql to remove 'text on row' setting for UserDefinedTable to make SQL Azure compatible. •Add new azureCompatible element to manifest. •Added a fix for importing templates. Changes to 6.0.2•Fix: MakeThumbnail was broken if the application pool was configured to .Net 4 •Change: Data is now stored in nvarchar(max) instead of ntext C...Trace Reader for Microsoft Dynamics CRM: Trace Reader (1.2013.10.3): Fix a bug when the first caracter of a description line is '[' Add search featureSimpleExcelReportMaker: Serm 0.03: SourceCode and Sample .Net Framework 3.5 AnyCPU compile.Application Architecture Guidelines: App Architecture Guidelines 3.0.8: This document is an overview of software qualities, principles, patterns, practices, tools and libraries.BlackJumboDog: Ver5.9.6: 2013.09.30 Ver5.9.6 (1)SMTP???????、???????????????? (2)WinAPI??????? (3)Web???????CGI???????????????????????New ProjectsASP.NET and ASP.NET MVC Blog Test: As a recent convert from Windows Forms & WPF to ASP.NET and ASP.NET MVC, I've created a simple project and implemented it twice using ASP.NET and ASP.NET MVC.cmdradio: Simple command-line interface internet radio playerDa Nang College Of Technology: Cao Ð?ng Công Ngh?DNN Camera Slideshow: The Camera Slideshow module for DNNFolder Iterator: Folder Iterator is a program I made one night to iterate through a folder and output an ordered list of files contained within the chosen directory.foobarpoc: fooJamendo Search Rest: This project uses the Jamendo REST API to search songs by title.Lab Nhibernate, PRISM, WPF, FLUENT, C#, ServiceStack, JSON: This is a lab for new technology and solving real developer problem Merch ASP.NET: This project is a port of Merch built on Zend framework 2 / PHP 5.MyTest2: This is test project2.Paintbear: Paintbear is a free open-source Paint Program and Image Manipulation Program for Windows based on the .NET Framework(version4). Works on Linux,too ! With Wine RasterConversion (.Net framework): Comparison of variants for working with raster (Bitmap class) at a low level. .Net framework, C#SSIS Custom Connection Manager: Example code for creating a Custom Connection Manager in SSIS 2008 and 2012Web Scripting Project: This is a project related to web application development at the Universtity of HertfordshireWebscripting1: New Scripting Website for University of Herts course Write.NET: Another .NET Blogging Engine: Write.NET is currently under development. Write.NET will be lightweight and highly configurable blogging engine built in MVC4Yoer: ????ASP.NET MVC??,????????????

    Read the article

  • How do I make my USB Bluetooth dongle work in Ubuntu 11.04 ? (Can't init device hci0: Connection timed out (110)) [closed]

    - by MaikoID
    I've a USB bluetooth dongle root@maiko-cce-lin:~# lsusb | grep Bluetooth Bus 001 Device 007: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) that isn't working properly, hardly-ever it works but stops working in my next reboot. what I've tried it isn't software blocked root@maiko-cce-lin:~# rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no my device is recognized by hciconfig root@maiko-cce-lin:~# hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:1F:81:00:01:1C ACL MTU: 1021:4 SCO MTU: 180:1 DOWN RX bytes:330 acl:0 sco:0 events:8 errors:0 TX bytes:24 acl:0 sco:0 commands:30 errors:22 Features: 0xff 0x3e 0x09 0x76 0x80 0x01 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT but I can't turn on my hci interface root@maiko-cce-lin:~# hciconfig hci up Can't init device hci0: Connection timed out (110) I don't understand why.. the hcitool command doesn't show any device. root@maiko-cce-lin:~# hcitool dev Devices: I've tried to restart my bluetooth service too with this command and make all these previous commands again but without success. root@maiko-cce-lin:~# service bluetooth restart * Stopping bluetooth [ OK ] * Starting bluetooth [ OK ] root@maiko-cce-lin:~# The dongle works if you disconnect it from usb, wait a few seconds and connect it again. so there must be better solution for it ( a solution not involving physically removing the dongle!)

    Read the article

  • Unable to configure a service to run at startup with update-rc.d

    - by ujjain
    I would like to have transmission-daemon and vnstat automatically run at startup. I was able to configure this for apache2 and proftpd with exactly the same commands. 795 sudo update-rc.d transmission-daemon remove 797 sudo update-rc.d -f transmission-daemon remove 798 sudo update-rc.d transmission-daemon defaults 799 sudo update-rc.d vnstat remove 800 sudo update-rc.d -f vnstat remove 801 sudo update-rc.d -f vnstat defaults 802 sudo update-rc.d -f vnstat enable 805 reboot 807 history root@htpc:/home/administrator# sudo update-rc.d -f transmission-daemon remove Removing any system startup links for /etc/init.d/transmission-daemon ... /etc/rc0.d/K20transmission-daemon /etc/rc1.d/K20transmission-daemon /etc/rc2.d/S20transmission-daemon /etc/rc3.d/S20transmission-daemon /etc/rc4.d/S20transmission-daemon /etc/rc5.d/S20transmission-daemon /etc/rc6.d/K20transmission-daemon root@htpc:/home/administrator# sudo update-rc.d -f transmission-daemon defaults Adding system startup for /etc/init.d/transmission-daemon ... /etc/rc0.d/K20transmission-daemon -> ../init.d/transmission-daemon /etc/rc1.d/K20transmission-daemon -> ../init.d/transmission-daemon /etc/rc6.d/K20transmission-daemon -> ../init.d/transmission-daemon /etc/rc2.d/S20transmission-daemon -> ../init.d/transmission-daemon /etc/rc3.d/S20transmission-daemon -> ../init.d/transmission-daemon /etc/rc4.d/S20transmission-daemon -> ../init.d/transmission-daemon /etc/rc5.d/S20transmission-daemon -> ../init.d/transmission-daemon root@htpc:/home/administrator# service vnstat status * vnStat daemon is not running root@htpc:/home/administrator# service transmission-daemon status * transmission-daemon is not running root@htpc:/home/administrator# service transmission-daemon start * Starting bittorrent daemon transmission-daemon [ OK ] root@htpc:/home/administrator# service vnstat start * Starting vnStat daemon vnstatd [ OK ] root@htpc:/home/administrator# service apache2 status Apache2 is running (pid 1137). root@htpc:/home/administrator#

    Read the article

  • How can I make fsck run non-interactively at boot time?

    - by Nelson
    I have a headless Ubuntu 12.04 server in a datacenter 1500 miles away. Twice now on reboot the system decided it had to fsck. Unfortunately Ubuntu ran fsck in interactive mode, so I had to ask someone at my datacenter to go over, plug in a console, and press the Y key. How do I set it up so that fsck runs in non-interactive mode at boot time with the -y or -p (aka -a) flag? If I understand Ubuntu's boot process correctly, init invokes mountall which in turn invokes fsck. However I don't see any way to configure how fsck is invoked. Is this possible? (To head off one suggestion; I'm aware I can use tune2fs -i 0 -c 0 to prevent periodic fscks. That may help a little but I need the system to try to come back up even if it had a real reason to fsck, say after a power failure.) In response to followup questions, here's the pertinent details of my /etc/fstab. I don't believe I've edited this at all from what Ubuntu put there. UUID=3515461e-d425-4525-a07d-da986d2d7e04 / ext4 errors=remount-ro 0 1 UUID=90908358-b147-42e2-8235-38c8119f15a6 /boot ext4 defaults 0 2 UUID=01f67147-9117-4229-9b98-e97fa526bfc0 none swap sw 0 0

    Read the article

  • Use 3 monitors w/built-in intel adapter + two old nvidia PCI cards on 10.10?

    - by Kendall Gifford
    I'd like to move from windows with my current workstation. The only thing holding me back is that I have 3 monitors connected to the system and I really take advantage of the real estate when working. I just installed Ubuntu 10.10 on the system and one of the monitors is up and running just fine. This monitor is connected to the built-in Intel adapter. I also have two old nVidia GeForce4 MX 4000 (nv19pl) cards in my two PCI slots with two monitors connected to them respectively. I installed the legacy (and proprietary) nVidia drivers (the nvidia-96 package) that claims to support these old cards. Now the question is how to get X configured to use all adapters (using two different drivers) so I can use all three monitors (and is this even possible)? From what I've read, it looks like I'll have to write an xorg.conf file since the nVidia driver doesn't support the auto-magic configuration supported by other drivers. On this site: http://wiki.ubuntu.com/X/Config it says that on 10.10 I just need to write an xorg.conf "containing only those sections and options that you need to override Xorg's autoconfigurated settings". So, does this mean I can get away with only including the nVidia-specific configuration stuff and all else will get auto-configured? Or, will providing a config with a "Device" section overrule the auto-magic from detecting/using the Intel adapter? I ran the included nvidia-xconfig to generate a basic, nVidia-specific xorg.conf but I'm hesitant to reboot with it in place, suspecting I'll have a screwed up display. Also, is there any way (any tool or command) to generate an xorg.conf from the current, auto-configured running state of an X session? If I have to write a full, complete config, I'd rather start with one that includes everything that's been auto-detected thus far (and merge it with my nVidia version). Anyhow, any info and thoughts are greatly appreciated (as are answers).

    Read the article

  • After update, flash plugin playing video too fast or too slow

    - by John H
    Last night I did an update and reboot. After that, I couldn't reliably play any flash videos. They would either go too fast or stutter (as if they were buffering every 2 seconds). This occurs in both Firefox and Chrome, however I'll troubleshoot in Chrome because it's easier to enable/disable plugins at will. With PPAPI enabled (and npapi disabled), flash videos play at 1.5x speeds and audio is scrambled. With NPAPI enabled (and ppapi disabled), flash videos stutter and skip, despite showing a decent buffer. From one old thread, I went into pavucontrol and tried disabling the high def audio controller. I also tried disabling Totem plugin to no affect. Version other details: Linux freshdesk 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ cat /etc/*-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" Shockwave Flash 11.3 r31 /opt/google/chrome/PepperFlash/libpepflashplayer.so 11.3.31.331 PPAPI (out-of-process) Shockwave Flash Version: 11.2 r202 Location: /usr/lib/adobe-flashplugin/libflashplayer.so Type: NPAP 01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 8400 GS] (rev a2) 01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)

    Read the article

  • Ask the Readers: What Operating System Do You Use?

    - by Mysticgeek
    The three most popular choices out there when it comes to computer operating systems, is Windows, Mac OS X, and Linux. What we want to know is…which operating system do you use? Photo by ~Dudu,,]* Computer users today have more choices than ever when it comes to the operating system they use. In the Windows world, there are three versions out there in daily use. A lot of businesses and home users use XP, completely avoided Vista, and are starting to migrate to Windows 7. While a lot of home users received their new computer with Vista pre-installed and are still using it. Others were quick to jump to Windows 7, and some don’t want to leave the comforts of XP. Desktop Linux distro’s have been consistently growing in popularity as versions like Ubuntu become more user friendly. And let us not forget the loyal Apple users who would never give up OS X. You may have to use a certain OS at the workplace, but when you get home, your options are a lot more open. And now with the ease of virtualization, it’s easy to run multiple operating systems on one machine. Each OS offers different advantages that people pick based on their needs. Today we want to know, which operating system(s) do you use? Let us know in the comments and join the discussion! Similar Articles Productive Geek Tips Easily Set Default OS in a Windows 7 / Vista and XP Dual-boot SetupGet the Version of Solaris RunningDisable System Restore in Windows 7Disable ProFTP on CentOSShut Down or Reboot a Solaris System TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Out of band Security Update for Internet Explorer 7 Cool Looking Screensavers for Windows SyncToy syncs Files and Folders across Computers on a Network (or partitions on the same drive) If it were only this easy Classic Cinema Online offers 100’s of OnDemand Movies OutSync will Sync Photos of your Friends on Facebook and Outlook

    Read the article

  • Ubuntu 12.04.2 won't boot after bumblebee instalation

    - by Andrej
    First of all sorry for my English, it's not my first language. Here is what I have done: I had a working ubuntu 12.04 with all updates and working bumblebee, so I could do optirun command and battery life was better than without bumblebee. Than I decided to reinstall both my systems installed windows 7 and ubuntu. Reinstalled Windows 7 all working as expected, than on other partition installed ubuntu 12.04. All worked perfectly. Than I installed bumblebee according to the procedure written here https://wiki.ubuntu.com/Bumblebee same steps that I used before. But now after I install drivers and do all written in procedure and I reboot my notebook system won't boot, it is simply stuck at black screen after short showing of start screen. I reinstalled ubuntu many times already and tried everthing, but when I try install nvidia drivers it won't boot after shutting down notebook and only thing I can do is reinstalling system. I have Lenovo Thinkpad Edge E530 and processor: Intel® Core™ i5-3210M CPU and graphic cards are Intel HD 4000 and Nvidia geforce gt630m After clean install without bumblebee, terminal command lspci| grep VGA is showing: 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) Can you suggest a sollution?? Or at least some links to similar topics??

    Read the article

  • Cedarview drivers boot to a blank screen

    - by map7
    I'm following the tutorial following tutorial to get my Intel D2700DC motherboard's graphics working: http://daily.siebler.eu/2012/06/ubuntu-12-04-driver-for-intel-cedarview-atom-n2000-und-d2000-serie/ When I boot I'm getting a blank screen. I followed the tutorial and read all the comments. I've also tried: Install gdm and use this instead of lightdm (ubuntu default) sudo apt-get install gdm Remove previous pae kernel: http://www.liberiangeek.net/2011/11/remove-old-kernels-in-ubuntu-11-10-oneiric-ocelot/ Reboot before adding cedarview packages. Have tried with and without the "video=LVDS-1:d" to GRUB_CMDLINE_LINUX_DEFAULT variable in /etc/default/grub I still get a blank screen. I am plugged into a HD screen through the HDMI and have tried the DVI connector also. I can see the grub menu, then a little of the loading and then 'No signal'. I can still ssh into the box though so it is logging in. lspci -v -s 00:02.0 00:02.0 VGA compatible controller: Intel Corporation Atom Processor D2xxx/N2xxx Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Intel Corporation Device 2011 Flags: bus master, fast devsel, latency 0, IRQ 45 Memory at 80100000 (32-bit, non-prefetchable) [size=1M] I/O ports at 20d0 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: pvrsrvkm Kernel modules: cedarview_gfx uname -a Linux test-desktop 3.2.0-35-generic #55-Ubuntu SMP Wed Dec 5 17:45:18 UTC 2012 i686 i686 i386 GNU/Linux

    Read the article

  • iOS 5: Enable Android Style Auto Correction Feature With A Simple Trick

    - by Gopinath
    Apple generally don’t let its users to play with their devices, but seems to be these days there are few things slipping through the nets. Smart users are able find some hacks and enable new features on iOS devices! Few days ago we heard about the hidden panorama feature built into iOS 5 and it could be enabled on a jail broken device. Here come another hidden feature unearthed by a smart geek in iOS 5 : enable Android style auto-correction on on-screen keyboard. Luckily to enable this feature you don’t need to jailbreak, all you need to do is to take backup of your device, edit a file and restore it back. Boom!  That’s it. To enable auto corrections feature on the on-screen keyboard of iOS 5 follow these steps Download iBackupBot and install it on your machine. It’s works on both Windows and Mac OS X. Backup your iPhone, iPod, or iPad with iTunes – plug in your iOS device and sync it. Open iBackupBot, locate your most recent backup and click on it Scroll down to Library/Preferences/com.apple.keyboard.plist and double-click on it.   Replace everything between the two <dict> with the following <key>KeyboardAutocorrectionLists</key> <string>YES</string> Save the plist file, then hit the "Restore From Backup" button in iBackupbot. Reboot your device to see the auto correction feature in action on your device’s on-screen keyboard. via lifehacker This article titled,iOS 5: Enable Android Style Auto Correction Feature With A Simple Trick, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

    Read the article

  • sudo dhclient eth0 | sudo: unable to resolve host ubuntu

    - by Merianos Nikos
    I have a computer of a friend of mine, that runs Ubuntu (I don't know what version, due to the current system status) and while he was updating the kernel, he reboot the computer (yes that could be happen !!, anyway) Currently I am trying to recover the system by using a live USB, with Ubuntu installed on it. What I am doing, is the following: Update Failure The problem is that when I try to execute the fifth step, I am getting error because I do not have Internet access. The computer is properly wired on my rooter, and I have Internet access in any place apart of the shell. This message for example is send it via the live USB. but I cannot access the Internet via the shell. In my shell I try to use this command: sudo dhclient eth0 but the result of this command is the following message sudo: unable to resolve host ubuntu My hosts file has the following content: 127.0.0.1 localhost 127.0.1.1 ubuntu # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts how can I get connected on the Internet, in order to download the appropriate updates ? UPDATE 1 I just notice, that when I execute the ifconfig I am getting the following warning: Warning: cannot open /proc/net/dev (No such file or directory). Limited output. UPDATE 2 I just found that, and looks like solving the problem with dhclient eth0 command, but still I cannot ping Google UPDATE 3 Now the sudo dhclient eth0 returns the following message: RTNETLINK answers: File exists UPDATE 4 I just ping my rooter and I getting response, so, it is looks like I cannot ping outside the rooter (ie. Google) Kind regards ...

    Read the article

  • Attempting to dual boot Ubuntu and Windows 7 on Sony Vaio with Insyde H2O BIOS

    - by zach
    My situation is the same that is addressed here Sony VAIO with Insyde H2O EFI bios will not boot into GRUB EFI and here http://www.hackourlife.com/sony-vaio-with-insyde-h2o-efi-bios-ubuntu-12-04-dual-boot I tried to install Ubuntu 12.04 from the Live CD alongside my current Windows 7. I have to switch my BIOS to legacy mode in order to boot from CD. If I were to do a normal installation and remain in legacy mode, the BIOS will display "operating system not found". If I switch back then the BIOS just boots to windows. To solve the problem, I tried following the steps in the previous two articles. My drive is partitioned as: sda1 FAT32 Location of Windows EFI files (flagged as boot in Ubuntu install) sda2 unknown sda3 NFTS Windows C: sda4 ext4 Ubuntu root sda5 swap sda6 ext4 Ubuntu home I was a little confused by the requirement in the second article to "be careful to install Grub bootloader in /dev/sda3" In my case, the relevant partition is sda1. I have tried three things: setting the sda1 mount point as /boot, as /boot/efi, and as the special reserved grub partition. In each install I indicated that grub should be installed in sda1. After each install I reboot to the live CD and look in the sda1. I see EFI/Boot and EFI/Windows, but no EFI/Ubuntu and consequently no grubx64.efi. I understand the recommended procedure of moving grubx64.efi into the EFI/Boot directory and replacing the present bootx64.efi file, but I see no grubx64.efi and I don't know where it should be.

    Read the article

  • How do I free up more space in /boot?

    - by user6722
    My /boot partition is nearly full and I get a warning every time I reboot my system. I already deleted old kernel packages (linux-headers...), actually I did that to install a newer kernel version that came with the automatic updates. After installing that new version, the partition is nearly full again. So what else can I delete? Are there some other files associated to the old kernel images? Here is a list of files that are on my /boot partition: :~$ ls /boot/ abi-2.6.31-21-generic lost+found abi-2.6.32-25-generic memtest86+.bin abi-2.6.38-10-generic memtest86+_multiboot.bin abi-2.6.38-11-generic System.map-2.6.31-21-generic abi-2.6.38-12-generic System.map-2.6.32-25-generic abi-2.6.38-8-generic System.map-2.6.38-10-generic abi-3.0.0-12-generic System.map-2.6.38-11-generic abi-3.0.0-13-generic System.map-2.6.38-12-generic abi-3.0.0-14-generic System.map-2.6.38-8-generic boot System.map-3.0.0-12-generic config-2.6.31-21-generic System.map-3.0.0-13-generic config-2.6.32-25-generic System.map-3.0.0-14-generic config-2.6.38-10-generic vmcoreinfo-2.6.31-21-generic config-2.6.38-11-generic vmcoreinfo-2.6.32-25-generic config-2.6.38-12-generic vmcoreinfo-2.6.38-10-generic config-2.6.38-8-generic vmcoreinfo-2.6.38-11-generic config-3.0.0-12-generic vmcoreinfo-2.6.38-12-generic config-3.0.0-13-generic vmcoreinfo-2.6.38-8-generic config-3.0.0-14-generic vmcoreinfo-3.0.0-12-generic extlinux vmcoreinfo-3.0.0-13-generic grub vmcoreinfo-3.0.0-14-generic initrd.img-2.6.31-21-generic vmlinuz-2.6.31-21-generic initrd.img-2.6.32-25-generic vmlinuz-2.6.32-25-generic initrd.img-2.6.38-10-generic vmlinuz-2.6.38-10-generic initrd.img-2.6.38-11-generic vmlinuz-2.6.38-11-generic initrd.img-2.6.38-12-generic vmlinuz-2.6.38-12-generic initrd.img-2.6.38-8-generic vmlinuz-2.6.38-8-generic initrd.img-3.0.0-12-generic vmlinuz-3.0.0-12-generic initrd.img-3.0.0-13-generic vmlinuz-3.0.0-13-generic initrd.img-3.0.0-14-generic vmlinuz-3.0.0-14-generic Currently, I'm using the 3.0.0-14-generic kernel.

    Read the article

  • Synaptics error "no touchpad found" at startup on HP laptop

    - by Sandra
    I know there are a lot of topics on the synaptics touchpad not working, but I can't seem to find the answer to my problem anywhere. Please forgive me if I missed it. Here is what happened. After using the "ambient light" F11 key on my HP laptop (Compaq nc8430), the touchpad was disabled and I couldn't get it to work. Then I found this thread : "Synaptic touchpad on laptop not working". And Salem's answer totally solved my problem, both for the session fix and for the permanent fix. But since then, after each reboot I get the same error pop-up, with the following content: No touchpad found. No touchpad was found in this system. If the system has a touchpad, please make sure that the synaptics driver is properly installed and configured. If your touchpad is not found, though the driver is installed and configured correctly, please compile detailed information about your touchpad hardware and report this issue to the issue tracker. Needless to say, the driver is indeed installed, activated and configured (even though it's kind of useless now, since I guess the .conf file I created is doing all the work). I know it's a minor issue, because the touchpad does work properly, but it's getting really annoying... So, could anyone please help me fix this error pop-up problem ? Thank you !

    Read the article

  • Error mounting: mount exited with exit code 13

    - by Mike Williamson
    I keep a windows partition on my laptop for the occaisional bit of Photoshop work. A while ago I noticed that Windows had disappeared from my grub boot menu and when I try to mount the windows partion, my system hangs for a bit and then I get this: Unable to mount 105 GB Filesystem Error mounting: mount exited with exit code 13: ntfs_attr_pread_i: ntfs_pread failed: Input/output error Failed to calculate free MFT records: Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details. It seems that chkdsk is a windows command but since I can't boot into windows (since its the windows partition that is the problem) I'm not sure what to do. Here is the output of fdisk to give you the lay of the land: Disk /dev/sda: 250.1 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x98000000 Device Boot Start End Blocks Id System /dev/sda1 1 10199 81923436 83 Linux /dev/sda2 * 10200 22947 102398310 7 HPFS/NTFS /dev/sda3 22948 29164 49938052+ 83 Linux /dev/sda4 29165 30401 9936202+ 5 Extended /dev/sda5 29165 30401 9936171 82 Linux swap / Solaris Any guidance would be appreciated!

    Read the article

  • How to diagnose and fix Kernel Panic Fatal Machine Check error?

    - by 0x4a6f4672
    I have got a new Samsung Series 7 laptop with dual boot setup for Windows 8 and Ubuntu 12.10. A fine machine comparable to a Macbook Pro. The Ubuntu installation was quite a hassle, but with the help of Boot Repair finally it seemed to work. Or so I thought. Windows 8 starts fine, but if I want to start Ubuntu regularly the following Machine Check Exception error occurs, quite similar to this one [Hardware Error] CPU 1: Machine Check Exception: 5 Bank 6 [Hardware Error] RIP !inexact! 33 <00007fab2074598a> [Hardware Error] TSC 95b623464c ADDR fe400 MISC 3880000086 .. [similar messages for CPU 2,3 and 0] .. [Hardware Error] Machine Check: Processor context corrupt Kernel panic - not syncing: Fatal Machine Check Rebooting in 30 seconds Kernel panic does not sound good. Then it starts to reboot, and the second boot trial often works. Is it a Kernel or driver problem? The laptop has an Intel Core i7 processor. I already deactivated Hyperthreading in the BIOS, but it does not seem to help :-( I also disabled the Execute Disable Bit (EDB) flag in the BIOS. EDB is an Intel hardware-based security feature that can help reduce system exposure to viruses and malicious code. Since I disabled it, the error did occur less frequently, but it still appears occasionally :-( It seems to be the same error as described here and here. Maybe a Samsung specific Kernel problem? A similar error also happens on a Samsung Ultrabook Series 9 (which seems to be kernel bugs 49161 and 47121). At my Samsung Series 7, it still occurs for instance during booting on battery after "Checking battery state". Perhaps anyone else has an idea? These Kernel Panic errors are reallly annoying..

    Read the article

  • Can't configure Bluetooth drivers for mac mini 4,1

    - by t0dbld
    upon following the instructions on thread for mac mini leading to me to a thread for a fix for BlueTooth, i follow the instructions (even they are for other Mac's) i get it to fire up and combined with hcitool i managed to connect my apple track pad and keyboard... how ever upon reboot im back to bluetooth telling me there are no drivers nothing works, yet all the files are still there? This is driving me nuts and i caant figure out what i could be doing do you have any ideas what would make this happen ? lsusb results Bus 004 Device 007: ID 05ac:8218 Apple, Inc. Bus 004 Device 006: ID 05ac:820b Apple, Inc. Bus 004 Device 005: ID 05ac:820a Apple, Inc. Bus 004 Device 004: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of BCM2046 Bluetooth) Bus 004 Device 003: ID 05ac:8242 Apple, Inc. IR Receiver [built-in] Bus 004 Device 002: ID 03f0:1c24 Hewlett-Packard Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 054c:031f Sony Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    Read the article

  • CodePlex Daily Summary for Thursday, October 10, 2013

    CodePlex Daily Summary for Thursday, October 10, 2013Popular ReleasesDynamics AX 2012 R2 Kitting: First Beta release of Kitting: First Beta release of Kitting Install by using XPO or Models.C# Intellisense for Notepad++: Release v1.0.8.0: - fixed document formatting artifacts To avoid the DLLs getting locked by OS use MSI file for the installation.CS-Script for Notepad++ (C# intellisense and code execution): Release v1.0.8.0: - fixed document formatting artifacts To avoid the DLLs getting locked by OS use MSI file for the installation.Generic Unit of Work and Repositories Framework: v2.0: Async methods for Repostiories - Ivan (@ifarkas) OData Async - Ivan (@ifarkas) Glimpse MVC4 workig with MVC5 Glimpse EF6 Northwind.Repostiory Project (layer) best practices for extending the Repositories Northwind.Services Project (layer), best practices for implementing business facade Live Demo: http://longle.azurewebsites.net/Spa/Product#/list Documentation: http://blog.longle.net/2013/10/09/upgrading-to-async-with-entity-framework-mvc-odata-asyncentitysetcontroller-kendo-ui-gli...Media Companion: Media Companion MC3.581b: Fix in place for TVDB xml issue. New* Movie - General Preferences, allow saving of ignored 'The' or 'A' to end of movie title, stored in sorttitle field. * Movie - New Way for Cropping Posters. Fixed* Movie - Rename of folders/filename. caught error message. * Movie - Fixed Bug in Save Cropped image, only saving in Pre-Frodo format if Both model selected. * Movie - Fixed Cropped image didn't take zoomed ratio into effect. * Movie - Separated Folder Renaming and File Renaming fuctions durin...Ghostscript.NET: Ghostscript.NET v.1.1.1.: v.1.1.1. fixed problem in GhostscriptRasterizer and GhostscriptViewer when MediaBox contains negative llx or lly values. (problem reported by "Prasenjit Das"). added GhostscriptPngDevice, a friendly output device class with all png devices related switches. (GhostscriptPngDevice supports: png16m, pngalpha, pnggray, png256, png16, pngmono, pngmonod). added GhostscriptJpegDevice, a friendly output device class with all jpeg devices related switches. (GhostscriptJpegDevice supports: jpeg, jp...xFunc: xFunc 2.7.3: Fixed memory leak. Small fixes.SmartStore.NET - Free ASP.NET MVC Ecommerce Shopping Cart Solution: SmartStore.NET 1.2.0: HighlightsMulti-store support "Trusted Shops" plugins Highly improved SmartStore.biz Importer plugin Add custom HTML content to pages Performance optimization New FeaturesMulti-store-support: now multiple stores can be managed within a single application instance (e.g. for building different catalogs, brands, landing pages etc.) Added 3 new Trusted Shops plugins: Seal, Buyer Protection, Store Reviews Added Display as HTML Widget to CMS Topics (store owner now can add arbitrary HT...AD ACL Scanner: 1.3: New features:Effective rights, select a security principal and match it agains the permissions in AD. Color coded permissions based on criticality when using effective rights scan. Search levels : Base, One Level, Subtree. List you domains and select one from the list. Get the size of the security descriptor (bytes). Rerporting on disabled inheritance . Better search functianlity; you can use wildcards on Trustee. Get all inherited permissions in report.MoreTerra (Terraria World Viewer): MoreTerra 1.11.2: Release 1.11.2 Full 1.2 Support =========== =Bug Fixes= =========== We have all markers solsund made sure the tile and background colors are correct. (map looks correct with no missing pink) Added better error tracking for those having trouble.Fast YouTube Downloader: Youtube Downloader 2.1: Youtube Downloader 2.1NuGet: NuGet 2.7.1: Released October 07, 2013. Release notes: http://docs.nuget.org/docs/release-notes/nuget-2.7.1 Important note: After downloading the signed build of NuGet.exe, if you perform an update using the "nuget.exe update -self" command, it will revert back to the unsigned build.Mugen MVVM Toolkit: Mugen MVVM Toolkit 2.0: IntroductionMugen MVVM Toolkit makes it easier to develop Silverlight, WPF, WinRT and WP applications using the Model-View-ViewModel design pattern. The purpose of the toolkit is to provide a simple framework and set of tools for getting up to speed quickly with applications based on the MVVM design pattern. The core of Toolkit contains a navigation system, windows management system, models, validation, etc. Mugen MVVM Toolkit contains all the MVVM classes such as ViewModelBase, RelayCommand,...Office Ribbon Project (under active development): Ribbon (07. Oct. 2013): Fixed Scrollbar Bug if DropDown Button is bigger than screen Added Office 2013 Theme Fixed closing the Ribbon caused a null reference exception in the RibbonButton.Dispose if the DropDown was not created yet Fixed Memory leak fix (unhooked events after Dispose) Fixed ToolStrip Selected Text 2013 and 2007 for Blue and Standard themesGhostscript Studio: Ghostscript.Studio v.1.0.2: Ghostscript Studio is easy to use Ghostscript IDE, a tool that facilitates the use of the Ghostscript interpreter by providing you with a graphical interface for postscript editing and file conversions. Ghostscript Studio allows you to preview postscript files, edit the code and execute them in order to convert PDF documents and other formats. The program allows you to convert between PDF, Postscript, EPS, TIFF, JPG and PNG by using the Ghostscript.NET Processor. v.1.0.2. added custom -c s...cmdradio: v0.1.1 binary: Default download in win32. For other OS see here. This is alpha version. Please report all bugs.Squiggle - A free open source LAN Messenger: Squiggle 3.3 Alpha: Allow using environment variables in configuration file (history db connection string, download folder location, display name, group and message) Fix for history viewer to show the correct history entries History saved with UTC timestamp This is alpha release and not recommended for use in productionVidCoder: 1.5.7 Beta: Updated HandBrake core to SVN 4819. About dialog now pulls down HandBrake version from the DLL. Added a confirmation dialog to Stop if the encode has been going on for more than 5 minutes. Fixed handling of unicode characters for input and output filenames. We now encode to UTF-8 before passing to HandBrake. Fixed a crash in the queue multiple titles dialog. Added code to rescue tool windows which get placed outside of the visible screen area.Wsus Package Publisher: Release v1.3.1310.05: Enhance the "Reboot Remote Computers", by adding a timer before the reboot occure. So that remote users can save their documents and close applications. You can also add a message to be display. In 'Tools'->'Settings'-> Misc Tab, you can set a default message. Enhance the "Compare Computers against AD", by choosing OUs to include in the comparison.VG-Ripper & PG-Ripper: PG-Ripper 1.4.19: NEW: Added Option to login as Guest NEW: Added Menu Option to delete an Forum Account NEW: Added Support for "ImageTeam.org links FIXED: Fixed Ripping of http://forum.babeunion.com ForumsNew ProjectsAphid: Aphid is an embeddable, cross-platform, multi-paradigm, and highly interoperable .NET scripting language.CCSP: De online plek voor de V-ICT-OR CCSP communityCLOSED: CLOSEDCorporation Wars: Corporation WarsEntityFramework.BulkInsert: Bulk insert extension for EntityFramework 5. Can be used with Code First approach only.HelpersLib: Simple set of helper libs to aid you with DVLUP challenges or general WP improvementsID3 Algorithm: ID3 algorithm from Machine Learning field. ID3 was implemented in .NET 4.0 using WinForms and C#.Impacta - C# - módulo II: Roteiro de aula para o módulo II de C# da Impacta.InstaSharp: InstaSharp is a C# library that wraps the Instagram API and makes it easy to write applications with Instagram data.iRateMyApp: Project Title iRateMyApp Project Description This is a project for Assignment 2 of Web Scripting and Content Creation (University of Hertfordshire) The projeiRateMyApps: This is a project for Assignment 2 of Web Scripting and Content Creation (University of Hertfordshire)MapLite: Android Tile Map, fork from osmdroidMileage Demo: This is a quick tool to help keep track of your mileage and translate the results to multiple output formats.multiples3and5: Small projectNido Framework with .Net 4.0 and Entity Framework help you standardize your BLL.: Nido is a reusable generic code library developed using .NET/ C# (4.0, EF) providing a common platform (Web, Windows Form, Web Service, Services and Libraries).pgist: gist, GitHubpsi56: ??ERPSharePoint QB Rating App: QB Rating App is a SharePoint 2013 App that calculates a QB's NFL and NCAA passing efficiency ratings.TFS PS Integration Editor: TFS PS Integration Editor is a tool that manage the main functionally of "TfsAdmin ProjectServer" command line tool.Tfs Test: A test TFS project.Windows Service Manager: The Service Manager is management of “Services”, wither these services are local (instance) or remote. Features 1. Start, Stop and Restart service. Work Smart: Work Smart helps prevent computer related health issues.XcbWeiXin: haha

    Read the article

  • Apache htaccess results in files being downloaded instead of displayed

    - by chrissik
    So I had this "beautiful" website that did exactly what I wanted it to do. Then I shut down my PC, reboot and...the pages just download now instead of being displayed. I re-installed XAMPP and launched Apache again and I was able to identify the .htaccess file as the cause of the problem. Options +FollowSymlinks RewriteEngine on RewriteCond %{QUERY_STRING} !^desktop RewriteCond %{HTTP_USER_AGENT} "android|blackberry|googlebot-mobile|iemobile|iphone|ipod|#opera mobile|palmos|webos" [NC] RewriteRule ^/?$ /mobile/index [L,R=302] RewriteRule ^/?$ /de/index [R] RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME}\.html -f RewriteRule ^(.*)$ $1.html Here is the problem I guess: RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME}\.html -f RewriteRule ^(.*)$ $1.html This should make it possible to use /de/index instead of /de/index.html - but somehow it causes the page to download if I open localhost/de/index (but with localhost/de/index.html it works fine...). I'm using HTML Sites with SSI Elements on a Apache web server. The only other file that is different to the out-of-the-box ones is the httpd.conf, where I enabled SSI: AddType text/html .shtml AddHandler server-parsed .shtml AddHandler server-parsed .html AddHandler server-parsed .htm Options Indexes FollowSymLinks Includes AddOutputFilter INCLUDES .shtml Options +Includes So I hope there is somebody among you that can help me with this annoying problem as I'm quite desperate... for some reason, even without the problematic lines Chrome keeps downloading the files (even if I delete the .htaccess file), while IE and Opera display the pages. Edit: Now Opera also wants to download files (whether index.html or index are called).

    Read the article

< Previous Page | 79 80 81 82 83 84 85 86 87 88 89 90  | Next Page >