Search Results

Search found 2815 results on 113 pages for 'statements'.

Page 84/113 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

  • Persistent warning message about "initWithDelegate"!

    - by RickiG
    Hi This is not an actual Xcode error message, it is a warning that has been haunting me for a long time. I have found no way of removing it and I think I maybe have overstepped some unwritten naming convention rule. If I build a class, most often extending NSObject, whose only purpose is to do some task and report back when it has data, I often give it a convenience constructor like "initWithDelegate". The first time I did this in my current project was for a class called ISWebservice which has a protocol like this: @protocol ISWebserviceDelegate @optional - (void) serviceFailed:(NSError*) error; - (void) serviceSuccess:(NSArray*) data; @required @end Declared in my ISWebservice.h interface, right below my import statements. I have other classes that uses a convenience constructor named "initWithDelegate". E.g. "InternetConnectionLost.h", this class does not however have its methods as optional, there are no @optional @required tags in the declaration, i.e. they are all required. Now my warning pops up every time I instantiate one of these Classes with convenience constructors written later than the ISWebservice, so when utilizing the "InternetConnectionLost" class, even though the entire Class owning the "InternetConnectionLost" object has nothing to do with the "ISWebservice" Class, no imports, methods being called, no nothing, the warning goes: 'ClassOwningInternetConnectionLost' does not implement the 'ISWebserviceDelegate' protocol I does not break anything, crash at runtime or do me any harm, but it has begun to bug me as I near release. Also, because several classes use the "initWithDelegate" constructor naming, I have 18 of these warnings in my build results and I am getting uncertain if I did something wrong, being fairly new at this language. Hope someone can shed a little light on this warning, thank you:)

    Read the article

  • correct way to create a pivot table in postgresql using CASE WHEN

    - by mojones
    I am trying to create a pivot table type view in postgresql and am nearly there! Here is the basic query: select acc2tax_node.acc, tax_node.name, tax_node.rank from tax_node, acc2tax_node where tax_node.taxid=acc2tax_node.taxid and acc2tax_node.acc='AJ012531'; And the data: acc | name | rank ----------+-------------------------+-------------- AJ012531 | Paromalostomum fusculum | species AJ012531 | Paromalostomum | genus AJ012531 | Macrostomidae | family AJ012531 | Macrostomida | order AJ012531 | Macrostomorpha | no rank AJ012531 | Turbellaria | class AJ012531 | Platyhelminthes | phylum AJ012531 | Acoelomata | no rank AJ012531 | Bilateria | no rank AJ012531 | Eumetazoa | no rank AJ012531 | Metazoa | kingdom AJ012531 | Fungi/Metazoa group | no rank AJ012531 | Eukaryota | superkingdom AJ012531 | cellular organisms | no rank What I am trying to get is the following: acc | species | phylum AJ012531 | Paromalostomum fusculum | Platyhelminthes I am trying to do this with CASE WHEN, so I've got as far as the following: select acc2tax_node.acc, CASE tax_node.rank WHEN 'species' THEN tax_node.name ELSE NULL END as species, CASE tax_node.rank WHEN 'phylum' THEN tax_node.name ELSE NULL END as phylum from tax_node, acc2tax_node where tax_node.taxid=acc2tax_node.taxid and acc2tax_node.acc='AJ012531'; Which gives me the output: acc | species | phylum ----------+-------------------------+----------------- AJ012531 | Paromalostomum fusculum | AJ012531 | | AJ012531 | | AJ012531 | | AJ012531 | | AJ012531 | | AJ012531 | | Platyhelminthes AJ012531 | | AJ012531 | | AJ012531 | | AJ012531 | | AJ012531 | | AJ012531 | | AJ012531 | | Now I know that I have to group by acc at some point, so I try select acc2tax_node.acc, CASE tax_node.rank WHEN 'species' THEN tax_node.name ELSE NULL END as sp, CASE tax_node.rank WHEN 'phylum' THEN tax_node.name ELSE NULL END as ph from tax_node, acc2tax_node where tax_node.taxid=acc2tax_node.taxid and acc2tax_node.acc='AJ012531' group by acc2tax_node.acc; But I get the dreaded ERROR: column "tax_node.rank" must appear in the GROUP BY clause or be used in an aggregate function All the previous examples I've been able to find use something like SUM() around the CASE statements, so I guess that is the aggregate function. I have tried using FIRST(): select acc2tax_node.acc, FIRST(CASE tax_node.rank WHEN 'species' THEN tax_node.name ELSE NULL END) as sp, FIRST(CASE tax_node.rank WHEN 'phylum' THEN tax_node.name ELSE NULL END) as ph from tax_node, acc2tax_node where tax_node.taxid=acc2tax_node.taxid and acc2tax_node.acc='AJ012531' group by acc2tax_node.acc; but get the error: ERROR: function first(character varying) does not exist Can anyone offer any hints?

    Read the article

  • Android : SQL Lite insertion or create table issue

    - by Ram
    Team, can anyone please help me to understand what could be the problem in the below snippet of code? It fails after insertion 2 and insertion 3 debug statements I have the contentValues in the Array list, I am iterating the arraylist and inserting the content values in to the database. Log.d("database","before insertion 1 "); liteDatabase = this.openOrCreateDatabase("Sales", MODE_PRIVATE, null); Log.d("database","before insertion 2 "); liteDatabase .execSQL("Create table activity ( ActivityId VARCHAR,Created VARCHAR,AMTaps_X VARCHAR,AMTemperature_X VARCHAR,AccountId VARCHAR,AccountLocation VARCHAR,AccountName VARCHAR,Classification VARCHAR,ActivityType VARCHAR,COTaps_X VARCHAR,COTemperature_X VARCHAR,Comment VARCHAR,ContactWorkPhone VARCHAR,CreatedByName VARCHAR,DSCycleNo_X VARCHAR,DSRouteNo_X VARCHAR,DSSequenceNo_X VARCHAR,Description VARCHAR,HETaps_X VARCHAR,HETemperature_X VARCHAR,Pro_Setup VARCHAR,LastUpdated VARCHAR,LastUpdatedBy VARCHAR,Licensee VARCHAR,MUTaps_X VARCHAR,MUTemperature_X VARCHAR,Objective VARCHAR,OwnerFirstName VARCHAR,OwnerLastName VARCHAR,PhoneNumber VARCHAR,Planned VARCHAR,PlannedCleanActualDt_X VARCHAR,PlannedCleanReason_X VARCHAR,PrimaryOwnedBy VARCHAR,Pro_Name VARCHAR,ServiceRepTerritory_X VARCHAR,ServiceRep_X VARCHAR,Status VARCHAR,Type VARCHAR,HEINDSTapAuditDate VARCHAR,HEINEmployeeType VARCHAR)"); Log.d("database","before insertion 3 "); int counter = 0; int size = arrayList.size(); for (counter = 0; counter < size; counter++) { ContentValues contentValues = (ContentValues) arrayList .get(counter); liteDatabase.insert("activity", "activityInfo", contentValues); Log.d("database", "Database insertion is done"); } }

    Read the article

  • Multhreading in Java

    - by Vijay Selvaraj
    I'm working with core java and IBM Websphere MQ 6.0. We have a standalone module say DBcomponent that hits the database and fetches a resultset based on the runtime query. The query is passed to the application via MQ messaging medium. We have a trigger configured for the queue which invokes the DBComponent whenever a message is available in the queue. The DBComponent consumes the message, constructs the query and returns the resultset to another queue. In this overall process we use log4j to log statements on a log file for auditing. The connection is pooled to the database using Apache pool. I am trying to check whether the log messages are logged correctly using a sample program. The program places the input message to the queue and checks for the logs in the log file. Its expected for the trigger method invocation to complete before i try to check for the message in log file, but every time my program to check for log message gets executed first leading my check to failure. Even if i introduce a Thread.sleep(time) doesn't solves the case. How can i make it to keep my method execution waiting until the trigger operation completes? Any suggestion will be helpful.

    Read the article

  • Should I use a collection here?

    - by Eva
    So I have code set up like this: public interface IInterface { public void setField(Object field); } public abstract class AbstractClass extends JPanel implements IInterface { private Object field_; public void setField(Object field) { field_ = field; } } public class ClassA extends AbstractClass { public ClassA() { // unique ClassA constructor stuff } public Dimension getPreferredSize() { return new Dimension(1, 1); } } public class ClassB extends AbstractClass { public ClassB() { // unique ClassB constructor stuff } public Dimension getPreferredSize() { return new Dimension(42, 42); } } public class ConsumerA { public ConsumerA(Collection<AbstractClass> collection) { for (AbstractClass abstractClass : collection) { abstractClass.setField(this); abstractClass.repaint(); } } } All hunky-dory so far, until public class ConsumerB { // Option 1 public ConsumerB(ClassA a, ClassB b) { methodThatOnlyTakesA(a); methodThatOnlyTakesB(b); } // Option 2 public ConsumerB(Collection<AbstractClass> collection) { for (IInterface i : collection) { if (i instanceof ClassA) { methodThatOnlyTakesA((ClassA) i); else if (i instanceof ClassB) { methodThatOnlyTakesB((ClassB) i); } } } } public class UsingOption1 { public static void main(String[] args) { ClassA a = new ClassA(); ClassB b = new ClassB(); Collection<AbstractClass> collection = Arrays.asList(a, b); ConsumerA consumerA = new ConsumerA(collection); ConsumerB consumerB = new ConsumerB(a, b); } } public class UsingOption2 { public static void main(String[] args) { Collection<AbstractClass> collection = Arrays.asList(new ClassA(), new ClassB()); ConsumerA = new ConsumerA(collection); ConsumerB = new ConsumerB(collection); } } With a lot more classes extending AbstractClass, both options get unwieldly. Option1 would make the constructor of ConsumerB really long. Also UsingOption1 would get long too. Option2 would have way more if statements than I feel comfortable with. Is there a viable Option3? If it helps, ClassA and ClassB have all the same methods, they're just implemented differently. Thanks for slogging through my code!

    Read the article

  • Munging non-printable characters to dots using string.translate()

    - by Jim Dennis
    So I've done this before and it's a surprising ugly bit of code for such a seemingly simple task. The goal is to translate any non-printable character into a . (dot). For my purposes "printable" does exclude the last few characters from string.printable (new-lines, tabs, and so on). This is for printing things like the old MS-DOS debug "hex dump" format ... or anything similar to that (where additional whitespace will mangle the intended dump layout). I know I can use string.translate() and, to use that, I need a translation table. So I use string.maketrans() for that. Here's the best I could come up with: filter = string.maketrans( string.translate(string.maketrans('',''), string.maketrans('',''),string.printable[:-5]), '.'*len(string.translate(string.maketrans('',''), string.maketrans('',''),string.printable[:-5]))) ... which is an unreadable mess (though it does work). From there you can call use something like: for each_line in sometext: print string.translate(each_line, filter) ... and be happy. (So long as you don't look under the hood). Now it is more readable if I break that horrid expression into separate statements: ascii = string.maketrans('','') # The whole ASCII character set nonprintable = string.translate(ascii, ascii, string.printable[:-5]) # Optional delchars argument filter = string.maketrans(nonprintable, '.' * len(nonprintable)) And it's tempting to do that just for legibility. However, I keep thinking there has to be a more elegant way to express this!

    Read the article

  • Escaping single quote in PHP when inserting into MySQL

    - by hairdresser-101
    I have a perplexing issue that I can't seem to comprehend... I'm hoping someone here might be able to point me in the right direction... I have two SQL statements: - the first enters information from a form into the database. - the second takes data from the database entered above, sends an email and then logs the details of the transaction The problem is that it a appears that a single quote is triggering a MySQL error on the second entry only!!! The first instance works without issue but the second instance triggers the mysql_error(). Does the data from a form get handled differently from the data captured in a form? Query#1 - This works without issue (and without escaping the single quote) $result = mysql_query("INSERT INTO job_log (order_id, supplier_id, category_id, service_id, qty_ordered, customer_id, user_id, salesperson_ref, booking_ref, booking_name, address, suburb, postcode, state_id, region_id, email, phone, phone2, mobile, delivery_date, stock_taken, special_instructions, cost_price, cost_price_gst, sell_price, sell_price_gst, ext_sell_price, retail_customer, created, modified, log_status_id) VALUES ('$order_id', '$supplier_id', '$category_id', '{$value['id']}', '{$value['qty']}', '$customer_id', '$user_id', '$salesperson_ref', '$booking_ref', '$booking_name', '$address', '$suburb', '$postcode', '$state_id', '$region_id', '$email', '$phone', '$phone2', '$mobile', STR_TO_DATE('$delivery_date', '%d/%m/%Y'), '$stock_taken', '$special_instructions', '$cost_price', '$cost_price_gst', '$sell_price', '$sell_price_gst', '$ext_sell_price', '$retail_customer', '".date('Y-m-d H:i:s', time())."', '".date('Y-m-d H:i:s', time())."', '1')"); Query#2 - This fails when entering a name with a single quote (i.e. O'Brien) $query = mysql_query("INSERT INTO message_log (order_id, timestamp, message_type, email_from, supplier_id, primary_contact, secondary_contact, subject, message_content, status) VALUES ('$order_id', '".date('Y-m-d H:i:s', time())."', '$email', '$from', '$row->supplier_id', '$row->primary_email' ,'$row->secondary_email', '$subject', '$message_content', '1')");

    Read the article

  • Escaping single quote in PHP when inserting into MySQL

    - by hairdresser-101
    PLEASE NOTE: I am reposting as the original was not answered correctly... I AM LOOKING FOR THE WHY - NOT THE SOLUTION - I KNOW THE SOLUTION, WHAT I DON'T UNDERSTAND IS THE WHY! I have a perplexing issue that I can't seem to comprehend... I'm hoping someone here might be able to point me in the right direction... I have two SQL statements: - the first enters information from a form into the database. - the second takes data from the database entered above, sends an email and then logs the details of the transaction The problem is that it a appears that a single quote is triggering a MySQL error on the second entry only!!! The first instance works without issue but the second instance triggers the mysql_error(). Does the data from a form get handled differently from the data captured in a form? Query#1 - This works without issue (and without escaping the single quote) $result = mysql_query("INSERT INTO job_log (order_id, supplier_id, category_id, service_id, qty_ordered, customer_id, user_id, salesperson_ref, booking_ref, booking_name, address, suburb, postcode, state_id, region_id, email, phone, phone2, mobile, delivery_date, stock_taken, special_instructions, cost_price, cost_price_gst, sell_price, sell_price_gst, ext_sell_price, retail_customer, created, modified, log_status_id) VALUES ('$order_id', '$supplier_id', '$category_id', '{$value['id']}', '{$value['qty']}', '$customer_id', '$user_id', '$salesperson_ref', '$booking_ref', '$booking_name', '$address', '$suburb', '$postcode', '$state_id', '$region_id', '$email', '$phone', '$phone2', '$mobile', STR_TO_DATE('$delivery_date', '%d/%m/%Y'), '$stock_taken', '$special_instructions', '$cost_price', '$cost_price_gst', '$sell_price', '$sell_price_gst', '$ext_sell_price', '$retail_customer', '".date('Y-m-d H:i:s', time())."', '".date('Y-m-d H:i:s', time())."', '1')"); Query#2 - This fails when entering a name with a single quote (i.e. O'Brien) $query = mysql_query("INSERT INTO message_log (order_id, timestamp, message_type, email_from, supplier_id, primary_contact, secondary_contact, subject, message_content, status) VALUES ('$order_id', '".date('Y-m-d H:i:s', time())."', '$email', '$from', '$row->supplier_id', '$row->primary_email' ,'$row->secondary_email', '$subject', '$message_content', '1')");

    Read the article

  • Writing fortran robust and "modern" code

    - by Blklight
    In some scientific environments, you often cannot go without FORTRAN as most of the developers only know that idiom, and there is lot of legacy code and related experience. And frankly, there are not many other cross-platform options for high performance programming ( C++ would do the task, but the syntax, zero-starting arrays, and pointers are too much for most engineers ;-) ). I'm a C++ guy but I'm stuck with some F90 projects. So, let's assume a new project must use FORTRAN (F90), but I want to build the most modern software architecture out of it. while being compatible with most "recent" compilers (intel ifort, but also including sun/HP/IBM own compilers) So I'm thinking of imposing: global variable forbidden, no gotos, no jump labels, "implicit none", etc. "object-oriented programming" (modules with datatypes + related subroutines) modular/reusable functions, well documented, reusable libraries assertions/preconditions/invariants (implemented using preprocessor statements) unit tests for all (most) subroutines and "objects" an intense "debug mode" (#ifdef DEBUG) with more checks and all possible Intel compiler checks possible (array bounds, subroutine interfaces, etc.) uniform and enforced legible coding style, using code processing tools C stubs/wrappers for libpthread, libDL (and eventually GPU kernels, etc.) C/C++ implementation of utility functions (strings, file operations, sockets, memory alloc/dealloc reference counting for debug mode, etc.) ( This may all seem "evident" modern programming assumptions, but in a legacy fortran world, most of these are big changes in the typical programmer workflow ) The goal with all that is to have trustworthy, maintainable and modular code. Whereas, in typical fortran, modularity is often not a primary goal, and code is trustworthy only if the original developer was very clever, and the code was not changed since then ! (i'm a bit joking here, but not much) I searched around for references about object-oriented fortran, programming-by-contract (assertions/preconditions/etc.), and found only ugly and outdated documents, syntaxes and papers done by people with no large-scale project involvement, and dead projects. Any good URL, advice, reference paper/books on the subject?

    Read the article

  • Python template engine

    - by jturo
    Hello there, Could it be possible if somebody could help me get started in writing a python template engine? I'm new to python and as I learn the language I've managed to write a little MVC framework running in its own light-weight-WSGI-like server. I've managed to write a script that finds and replaces keys for values: (Obviously this is not how my script is structured or implemented. this is just an example) from string import Template html = '<html>\n' html += ' <head>\n' html += ' <title>This is so Cool : In Controller HTML</title>\n' html += ' </head>\n' html += ' <body>\n' html += ' Home | <a href="/hi">Hi ${name}</a>\n' html += ' </body>\n' html += '<html>' Template(html).safe_substitute(dict(name = 'Arturo')) My next goal is to implement custom statements, modifiers, functions, etc (like 'for' loop) but i don't really know if i should use another module that i don't know about. I thought of regular expressions but i kind feel like that wouldn't be an efficient way of doing it Any help is appreciated, and i'm sure this will be of use to other people too. Thank you

    Read the article

  • What issues to consider when rolling your own data-backend for Silverlight / AJAX on non-ASP.NET ser

    - by Edward Tanguay
    I have read-only Silverlight and AJAX apps which read static text and XML files from a PHP/Apache server, which works very nicely with features such as asynchronous loading, lazy-loading only what I need for each page, loading in the background, developed a little query language to get a PHP script to create custom XML files etc. it's pragmatic read-only REST, and all works fast and fine for read-only sites. Now I want to also add the ability to write data from these apps to a database on the same PHP/Apache server. For those of you who have built similar data-access layers, what do I need to consider while building this, especially regarding security so that not just any client can write and alter my database, e.g.: check HTTP_USER_AGENT for security check REMOTE_ADDR for security require a special code for security, perhaps a list of TAN codes (such as banks use for online transactions) each which can only be used once, both the client and server have these I wonder if there is some kind of standard REST query I should lean on for e.g. building SQL-like statements in the URL parameters, e.g. http://www.thedatalayersite.com/query?insertinto=customers&... Any thoughts, notes from experience, ideas, gotchas, especially ideas on tightening down security in this endeavor would be helpful.

    Read the article

  • about Quick Sort

    - by matin1234
    Hi I have written this code but it will print these stack traces in the console please help me thanks! (Aslo "p" and "q" are the first and last index of our array ,respectively) public class JavaQuickSort { public static void QuickSort(int A[], int p, int q) { int i, last = 0; Random rand = new Random(); if (q < 1) { return; } **swap(A, p, rand.nextInt() % (q+1));** for (i = p + 1; i <= q; i++) { if (A[i] < A[p]) { swap(A, ++last, i); } } swap(A, p, last); QuickSort(A, p, last - 1); QuickSort(A, last + 1, q); } private static void swap(int[] A, int i, int j) { int temp; temp = A[i]; **A[i] = A[j];** A[j] = temp; } public static void main(String[] args){ int[] A = {2,5,7,3,9,0,1,6,8}; **QuickSort(A, 0,8 );** System.out.println(Arrays.toString(A)); } } the Stack traces : run: Exception in thread "main" java.lang.ArrayIndexOutOfBoundsException: -3 at JavaQuickSort.swap(JavaQuickSort.java:38) at JavaQuickSort.QuickSort(JavaQuickSort.java:22) at JavaQuickSort.main(JavaQuickSort.java:45) Java Result: 1 BUILD SUCCESSFUL (total time: 2 seconds) I also bold those statements that cause these stack traces. like == ** ...**

    Read the article

  • Improving SQL Code

    - by jeremib
    I'm using Pervasive SQL. I have the following UNION of mulitple SQL statements. Is there a way to clean this up, especially the Pay Date an the Loc No fields that are selected in each statement. Is there a way to pull this out and have only one place to need to change those two fields? ( SELECT '23400' as Gl_Number, y.Plan as Description, 0 as Hours, ROUND(SUM(Ee_Curr),2) as Debit, 0 as Credit FROM "PR_YLOC" y LEFT JOIN PR_SUMM s ON (s.Summ_No = y.Summ_No) WHERE y.Loc_No = 1041 AND s.Pay_Date = '2010-04-02' AND y.Code IN (100, 105, 110) AND y.Type = 3 GROUP BY y.Plan ) UNION ( SELECT '72000' as Gl_Number, y.Plan, 0, ROUND(SUM(Er_Curr),2), 0 FROM "PR_YLOC" y LEFT JOIN PR_SUMM s ON (s.Summ_No = y.Summ_No) WHERE y.Loc_No = 1041 AND s.Pay_Date = '2010-04-02' AND y.Code IN (100, 105, 110) AND y.Type = 3 GROUP BY y.Plan ) UNION ( SELECT '24800', c.Plan, 0, ROUND(SUM(Ee_Amt),2), 0 FROM "PR_CDED" c WHERE Pay_Date = '2010-04-02' AND Loc_No = 1041 AND Code = 100 GROUP BY c.Plan ) UNION ( SELECT '24800', c.Plan, 0, 0, ROUND(SUM(Ee_Amt),2) FROM "PR_CDED" c WHERE Pay_Date = '2010-04-02' AND Loc_No = 1041 AND Code = 115 GROUP BY c.Plan ) UNION ( SELECT '24150', c.Plan, 0, 0, ROUND(SUM(Ee_Amt),2) FROM "PR_CDED" c WHERE Pay_Date = '2010-04-02' AND Loc_No = 1041 AND Code = 241 GROUP BY c.Plan ) UNION ( SELECT '24150', c.Plan, 0, ROUND(SUM(Ee_Amt),2), 0 FROM "PR_CDED" c WHERE Pay_Date = '2010-04-02' AND Loc_No = 1041 AND Code = 239 GROUP BY c.Plan ) UNION ( SELECT '24120', c.Plan, 0, ROUND(SUM(Ee_Amt),2), 0 FROM "PR_CDED" c WHERE Pay_Date = '2010-04-02' AND Loc_No = 1041 AND Code = 230 GROUP BY c.Plan ) UNION ( SELECT '24100', c.Plan, 0, ROUND(SUM(Ee_Amt),2), 0 FROM "PR_CDED" c WHERE Pay_Date = '2010-04-02' AND Loc_No = 1041 AND Code = 225 GROUP BY c.Plan ) UNION ( SELECT '23800', c.Plan, 0, ROUND(SUM(Ee_Amt),2), 0 FROM "PR_CDED" c WHERE Pay_Date = '2010-04-02' AND Loc_No = 1041 AND Code = 245 GROUP BY c.Plan ) UNION ( select m.Def_Dept as Gl_Number, t.Short_Desc, (SELECT SUM(Hours) FROM pr_earn en WHERE en.Loc_No = e.Loc_No AND en.Emp_No = e.Emp_No AND en.Pay_Date = e.Pay_Date AND en.Pay_Code = e.Pay_Code) as Hours, (SELECT SUM(Pay_Amt) FROM pr_earn en WHERE en.Loc_No = e.Loc_No AND en.Emp_No = e.Emp_No AND en.Pay_Date = e.Pay_Date AND en.Pay_Code = e.Pay_Code) as Debit, 0 from pr_earn e left join pr_mast m on (e.Loc_No = m.Loc_No and e.Emp_No = m.Emp_No) left join pr_ptype t ON (t.Code = e.Pay_Code) where e.loc_no = 1041 and e.pay_date = '2010-04-02' group by m.Def_Dept, t.Short_Desc ) Thanks

    Read the article

  • How to get list of declared functions with their data from php file?

    - by ermac2014
    I need to get list of functions with their contents (not only the function name) from php file. I tried to use regex but it has lots of limitations. it doesn't parse all types of functions. for example it fails if the function has if and for loop statements. in details: I have around 100 include files. each file has number of declared functions. some files has functions duplicated in other files. so what I want is to get list of all functions from specific file then put this list inside an array then I will be using array unique in order to remove the duplicates. I read about tokenizer but I really have no idea how to make it grab the declared function with its data. all I have is this: function get_defined_functions_in_file($file) { $source = file_get_contents($file); $tokens = token_get_all($source); $functions = array(); $nextStringIsFunc = false; $inClass = false; $bracesCount = 0; foreach($tokens as $token) { switch($token[0]) { case T_CLASS: $inClass = true; break; case T_FUNCTION: if(!$inClass) $nextStringIsFunc = true; break; case T_STRING: if($nextStringIsFunc) { $nextStringIsFunc = false; $functions[] = $token[1]; } break; // Anonymous functions case '(': case ';': $nextStringIsFunc = false; break; // Exclude Classes case '{': if($inClass) $bracesCount++; break; case '}': if($inClass) { $bracesCount--; if($bracesCount === 0) $inClass = false; } break; } } return $functions; } unfortunately, this function lists only the function names.. what I need is to list the whole declared function with its structure.. so any ideas? thanks in advance..

    Read the article

  • Error in creating trigger using PHP script.. Please help!!!! Geeks

    - by Parth
    I've been successful in creating a simple trigger with a PHP script. The problem comes when I have to use "DELIMITER" in my trigger creating because I have nested if/then statements. For example, the following DOES work: $sql = 'CREATE TRIGGER `database`.`detail` BEFORE INSERT on `database`.`vibez_detail` FOR EACH ROW set @a=new.realtime_value'; $junk = mysqli_query($link, $sql); However, if I need to use "DELIMITER" I get errors galore. Here's what works if I go to the MySQL client at the server: DELIMITER $$; DROP TRIGGER `database`.`detail`$$ CREATE TRIGGER `database`.`detail` BEFORE INSERT on `database`.`vibez_detail` FOR EACH ROW BEGIN set new.data_rate = 69; insert into alarm_trips_parent values (null, new.data_rate, 6969, now()); set @tripped_time = now(); set @tripped:=true; end if; end if; END$$ DELIMITER ;$$ How can I construct the PHP code to get this to work? Seems the mysqli_query($link, $sql) chokes as soon as I put "DELIMITER" in the $sql variable. I get the following error when I attempt to do so: Error: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'DELIMITER //; CREATE TRIGGER `database`.`detail` BEFORE INS' at line 1 Even The concept for using mysqli_multi_query(); didn't worked for me.... :(

    Read the article

  • Updating nullability of columns in SQL 2008

    - by Shaul
    I have a very wide table, containing lots and lots of bit fields. These bit fields were originally set up as nullable. Now we've just made a decision that it doesn't make sense to have them nullable; the value is either Yes or No, default No. In other words, the schema should change from: create table MyTable( ID bigint not null, Name varchar(100) not null, BitField1 bit null, BitField2 bit null, ... BitFieldN bit null ) to create table MyTable( ID bigint not null, Name varchar(100) not null, BitField1 bit not null, BitField2 bit not null, ... BitFieldN bit not null ) alter table MyTable add constraint DF_BitField1 default 0 for BitField1 alter table MyTable add constraint DF_BitField2 default 0 for BitField2 alter table MyTable add constraint DF_BitField3 default 0 for BitField3 So I've just gone in through the SQL Management Studio, updating all these fields to non-nullable, default value 0. And guess what - when I try to update it, SQL Mgmt studio internally recreates the table and then tries to reinsert all the data into the new table... including the null values! Which of course generates an error, because it's explicitly trying to insert a null value into a non-nullable column. Aaargh! Obviously I could run N update statements of the form: update MyTable set BitField1 = 0 where BitField1 is null update MyTable set BitField2 = 0 where BitField2 is null but as I said before, there are n fields out there, and what's more, this change has to propagate out to several identical databases. Very painful to implement manually. Is there any way to make the table modification just ignore the null values and allow the default rule to kick in when you attempt to insert a null value?

    Read the article

  • How can I work around the fact that in C++, sin(M_PI) is not 0?

    - by Adam Doyle
    In C++, const double Pi = 3.14159265; cout << sin(Pi); // displays: 3.58979e-009 it SHOULD display the number zero I understand this is because Pi is being approximated, but is there any way I can have a value of Pi hardcoded into my program that will return 0 for sin(Pi)? (a different constant maybe?) In case you're wondering what I'm trying to do: I'm converting polar to rectangular, and while there are some printf() tricks I can do to print it as "0.00", it still doesn't consistently return decent values (in some cases I get "-0.00") The lines that require sin and cosine are: x = r*sin(theta); y = r*cos(theta); BTW: My Rectangular - Polar is working fine... it's just the Polar - Rectangular Thanks! edit: I'm looking for a workaround so that I can print sin(some multiple of Pi) as a nice round number to the console (ideally without a thousand if-statements) edit: In case anyone's curious, this was what I landed on: double sin2(double theta) // in degrees { double s = sin(toRadians(theta)); if (fabs(s - (int)s) < 0.000001) { return floor(s + 0.5); } return s; } where toRadians() is a macro that converts to radians

    Read the article

  • deepcopy and python - tips to avoid using it?

    - by blackkettle
    Hi, I have a very simple python routine that involves cycling through a list of roughly 20,000 latitude,longitude coordinates and calculating the distance of each point to a reference point. def compute_nearest_points( lat, lon, nPoints=5 ): """Find the nearest N points, given the input coordinates.""" points = session.query(PointIndex).all() oldNearest = [] newNearest = [] for n in xrange(nPoints): oldNearest.append(PointDistance(None,None,None,99999.0,99999.0)) newNearest.append(obj2) #This is almost certainly an inappropriate use of deepcopy # but how SHOULD I be doing this?!?! for point in points: distance = compute_spherical_law_of_cosines( lat, lon, point.avg_lat, point.avg_lon ) k = 0 for p in oldNearest: if distance < p.distance: newNearest[k] = PointDistance( point.point, point.kana, point.english, point.avg_lat, point.avg_lon, distance=distance ) break else: newNearest[k] = deepcopy(oldNearest[k]) k += 1 for j in range(k,nPoints-1): newNearest[j+1] = deepcopy(oldNearest[j]) oldNearest = deepcopy(newNearest) #We're done, now print the result for point in oldNearest: print point.station, point.english, point.distance return I initially wrote this in C, using the exact same approach, and it works fine there, and is basically instantaneous for nPoints<=100. So I decided to port it to python because I wanted to use SqlAlchemy to do some other stuff. I first ported it without the deepcopy statements that now pepper the method, and this caused the results to be 'odd', or partially incorrect, because some of the points were just getting copied as references(I guess? I think?) -- but it was still pretty nearly as fast as the C version. Now with the deepcopy calls added, the routine does it's job correctly, but it has incurred an extreme performance penalty, and now takes several seconds to do the same job. This seems like a pretty common job, but I'm clearly not doing it the pythonic way. How should I be doing this so that I still get the correct results but don't have to include deepcopy everywhere?

    Read the article

  • strategy for choosing proper object and proper method

    - by zerkms
    in the code below at first if statements block (there will be more than just "worker" condition, joined with else if) i select proper filter_object. After this in the same conditional block i select what filter should be applied by filter object. This code is silly. public class Filter { public static List<data.Issue> fetch(string type, string filter) { Filter_Base filter_object = new Filter_Base(filter); if (type == "worker") { filter_object = new Filter_Worker(filter); } else if (type == "dispatcher") { filter_object = new Filter_Dispatcher(filter); } List<data.Issue> result = new List<data.Issue>(); if (filter == "new") { result = filter_object.new_issues(); } else if (filter == "ended") { result = filter_object.ended_issues(); } return result; } } public class Filter_Base { protected string _filter; public Filter_Base(string filter) { _filter = filter; } public virtual List<data.Issue> new_issues() { return new List<data.Issue>(); } public virtual List<data.Issue> ended_issues() { return new List<data.Issue>(); } } public class Filter_Worker : Filter_Base { public Filter_Worker(string filter) : base(filter) { } public override List<data.Issue> new_issues() { return (from i in data.db.GetInstance().Issues where (new int[] { 4, 5 }).Contains(i.RequestStatusId) select i).Take(10).ToList(); } } public class Filter_Dispatcher : Filter_Base { public Filter_Dispatcher(string filter) : base(filter) { } } it will be used in some kind of: Filter.fetch("worker", "new"); this code means, that for user that belongs to role "worker" only "new" issues will be fetched (this is some kind of small and simple CRM). Or another: Filter.fetch("dispatcher", "ended"); // here we get finished issues for dispatcher role Any proposals on how to improve it?

    Read the article

  • Iterate through main function in C?

    - by Mohit Deshpande
    Here is my main function: int main(int argc, char **argv) { LoadFile(); Node *temp; char *key; switch (GetUserInput()) { case 1: temp = malloc(sizeof(Node)); printf("\nEnter the key of the new node: "); scanf("%s", temp->key); printf("\nEnter the value of the new node: "); scanf("%s", temp->value); AddNode(temp); free(temp); break; case 2: key = malloc(sizeof(char *)); printf("Enter the key of the node you want to delete: "); scanf("%s", key); DeleteNode(key); free(key); break; case 3: PrintAll(); break; case 4: SaveFile(); break; case 5: return 0; break; default: printf("\nWrong choice!\n"); break; } return 0; } The only problem with it is that after any case statement breaks, the program just exits out. I understand why, but I don't know how to fix it. I want the program to repeat itself each time even after the case statements. Would I just say: main(argc, argv); before every break statement?

    Read the article

  • How to catch a carp-warning?

    - by sid_com
    I tried to catch a carp-warning ( carp "$start is $end" if (warnings::enabled()); ) with eval but it didn't work, so I looked in the eval-documentation and I discovered, that eval catches only syntax-errors, run-time-errors or executed die-statements. How could I catch a carp-warning? #!/usr/bin/env perl use warnings; use strict; use 5.012; use List::Util qw(max min); use Number::Range; my @array; my $max = 20; print "Input (max $max): "; my $in = <>; $in =~ s/\s+//g; $in =~ s/(?<=\d)-/../g; eval { my $range = new Number::Range( $in ); @array = sort { $a <=> $b } $range->range; }; if ( $@ =~ /\d+ is > \d+/ ) { die $@ }; # catch the carp-warning doesn't work die "Input greater than $max not allowed $!" if defined $max and max( @array ) > $max; die "Input '0' or less not allowed $!" if min( @array ) < 1; say "@array";

    Read the article

  • Getting Started with Ruby & Ruby on Rails

    - by JakeTheSnake
    Some background: I'm a jack-of-all traits, one of which is programming. I learned VB6 through Excel and PHP for creating websites and so far it's worked out just fine for me. I'm not CS major or even mathematically inclined - logic is what interests me. Current status: I'm willing to learn new and more powerful languages; my first foray into such a route is learning Ruby. I went to the main Ruby website and did the interactive intro. (by the way, I'm currently getting redirected to google.com when I try the link...it's happening to other websites as well...is my computer infected?) I liked what I learned and wanted to get started using Ruby to create websites. I downloaded InstantRails and installed it; everything so far has been fine - the program starts up just fine, and I can test some Ruby code in the console. However my troubles begin when I try and view a web page with Ruby code present. Lastly, my problem: As in PHP, I can browse to the .php file directly and through using PHP tags and some simple 'echo' statements I can be on my way in making dynamic web pages. However with the InstantRails app working, accessing a .rb or .rhtml page doesn't produce similar results. I made a simple text file named 'test.rb' and put basic HTML tags in there (html, head, body) and the Ruby tags <%= and % with some ruby code inside. The web page actually shows the tags and the code - as if it's all just plain HTML. I take it Ruby isn't parsing the page before it is displayed to the user, but this is where my lack of understanding of the Ruby environment stops me short. Where do I go from here?

    Read the article

  • Awk filtering values between two files when regions intersect (any solutions welcome)

    - by user964689
    This is building upon an earlier question Awk conditional filter one file based on another (or other solutions) I have an awk program that outputs a column from rows in a text file 'refGene.txt if values in that row match 2 out of 3 values in another text file. I need to include an additional criteria for finding a match between the two files. The criteria is inclusion if the range of the 2 numberical values specified in each row in file 1 overlap with the range of the two values in a row in refGene.txt. An example of a line in File 1: chr1 10 20 chr2 10 20 and an example line in file 2(refGene.txt) of the matching columns ($3, $5, $ 6): chr1 5 30 Currently the awk program does not treat this as a match because although the first column matches neither the 2nd or 3rd columns do no. But I would like a way to treat this as a match because the region 10-20 in file 1 is WITHIN the range of 5-30 in refGene.txt. However the second line in file 1 should NOT match because the first column does not match, which is necessary. If there is a way to include cases when any of the range in file 1 overlaps with any of the range in refGene.txt that would be really helpful. It should also replace the below conditional statements as it would also find all the cases currently described below. Please let me know if my question is unclear. Any help is really appreciated, thanks it advance! (solutions do not have to be in awk) Rubal FILES=/files/*txt for f in $FILES ; do awk ' BEGIN { FS = "\t"; } FILENAME == ARGV[1] { pair[ $1, $2, $3 ] = 1; next; } { if ( pair[ $3, $5, $6 ] == 1 ) { print $13; } } ' $(basename $f) /files/refGene.txt > /files/results/$(basename $f) ; done

    Read the article

  • MS Access 2003 - Save button enabling on form open on different tabs

    - by Justin
    I have a tab control on a form, and a couple different tabs have save buttons on them. Once the user saves data (via SQL statements in VBA), I set the .enabled = false so that they cannot use this button again until moving to a brand new record (which is a button click on the overall form). so when my form open i was going to reference a sub that enabled all these save buttons because the open event would mean new record. though i get an error that says it either does not exist, or is closed. any ideas? thanks EDIT: Sub Example() error handling Dim db as dao.database dim rs as dao.recordset dim sql as string SQL = "INSERT INTO tblMain (Name, Address, CITY) VALUES (" if not isnull (me.name) then sql = sql & """" & me.name & """," else sql = sql & " NULL," end if if not insull(me.adress) then sql = sql & " """ & me.address & """," else sql = sql & " NULL," end if if not isnull(me.city) then sql = sql & " """ & me.city & """," else sql = sql & " NULL," end if 'debug.print(sql) set db = currentdb db.execute (sql) MsgBox "Changes were successfully saved" me.MyTabCtl.Pages.Item("SecondPage").setfocus me.cmdSaveInfo.enabled = false and then on then the cmdSave needs to get re enabled on a new record (which by the way, this form is unbound), so it all happens when the form is re-opened. I tried this: Sub Form_Open() me.cmdSaveInfo.enabled = true End Sub and this is where I get the error stated above. So this is also not the tab that has focus when the form opens. Is that why I get this error? I cannot enable or disable a control when the tab is not showing?

    Read the article

  • How to exit an if clause

    - by Roman Stolper
    What sorts of methods exist for prematurely exiting an if clause? There are times when I'm writing code and want to put a break statement inside of an if clause, only to remember that those can only be used for loops. Lets take the following code as an example: if some_condition: ... if condition_a: # do something # and then exit the outer if block ... if condition_b: # do something # and then exit the outer if block # more code here I can think of one way to do this: assuming the exit cases happen within nested if statements, wrap the remaining code in a big else block. Example: if some_condition: ... if condition_a: # do something # and then exit the outer if block else: ... if condition_b: # do something # and then exit the outer if block else: # more code here The problem with this is that more exit locations mean more nesting/indented code. Alternatively, I could write my code to have the if clauses be as small as possible and not require any exits. Does anyone know of a good/better way to exit an if clause? If there are any associated else-if and else clauses, I figure that exiting would skip over them.

    Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >