Search Results

Search found 7085 results on 284 pages for 'termine updates'.

Page 84/284 | < Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >

  • Fix stubborn 'Setting locale failed.'

    - by plua
    I have a very stubborn, well-known locale error on Ubuntu 9.10: perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LC_TIME = "custom.UTF-8", LANG = "en_US.UTF-8" Tried the following: Added LANG=en_US.UTF-8 and LC_ALL=en_US.UTF-8 to /etc/environment Run apt-get install --reinstall locales (error: perl: warning: Falling back to the standard locale ("C"). /usr/bin/mandb: can't set the locale; make sure $LC_* and $LANG are correct) Run sudo dpkg-reconfigure locales. Result: Cannot set LC_ALL to default locale: No such file or directory, and then updates locales all locales including en_US.UTF-8 sudo locale-gen updates all locales successfully, including en_US.UTF-8 sudo locale-gen un_US en_US.UTF-8 gives no error nor other output In /etc/default/locale it says LANG="en_US.UTF-8" echo $LANG gives en_US.UTF-8 /var/lib/locales/supported.d/local says en_US.UTF-8 UTF-8 locale -a gives me: C en_AG en_AU.utf8 en_BW.utf8 en_CA.utf8 en_DK.utf8 en_GB.utf8 en_HK.utf8 en_IE.utf8 en_IN en_NG en_NZ.utf8 en_PH.utf8 en_SG.utf8 en_US.utf8 en_ZA.utf8 en_ZW.utf8 POSIX So well... I am pretty much out of options I can think of. Anybody any idea?? Thanks!

    Read the article

  • VMware Workstation update stopped autofit guest working

    - by u8sand
    VMware one day offered an update (8.0.1 build-528992 my current version) from 8.0. I accepted it, because updates usually fix problems. However not in this case... Previously it worked very well. Now, it still "works" but the one glitch I'm getting makes it too hard to deal with. This screenshot will explain my problem: As you can see, my virtual PC is not resizing correctly. (This happens with any operating system), autofit guest just doesn't work - it only results in things like this happening. Thanks to the tools it becomes very hard to NOT autofit guest. I've tried uninstalling 8.0.1 completely and installing 8.0 again but with the same results. I don't really understand what the new update has done to VMware Workstation or to my virtual machines. I do believe this isn't VMware Workstation's direct fault but from VMware Tools, which would explain why going back to 8.0 didn't work since VMware tools has its own updates. How can I fix this? The host is running Windows 7 Ultimate 64-bit.

    Read the article

  • After update, suddenly lost ability to access Windows Server 2008 R2 shares from Windows XP clients

    - by Knute Knudsen
    Today I lost the ability to see my Windows Server 2008 R2 shares from any of my 3 Windows XP machines in my small office. The 5 Win7 machines haven't been affected (they are still able to browse/access the 2008 server), but none of my WinXP machines can access the 2008R2 server anymore. Yesterday (and for the previous year) everything was working fine. I do not have a domain setup. I can still access Win7 shares from WinXP clients. Browsing the server logs, I see that the following update was installed last night: > Installation Ready: The following updates are downloaded and ready for > installation. This computer is currently scheduled to install these > updates on ?Thursday, ?November ?15, ?2012 at 3:00 AM: > - Security Update for Windows Server 2008 R2 x64 Edition (KB2761226) > - Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2729452) > - Windows Malicious Software Removal Tool x64 - November 2012 (KB890830) > - Cumulative Security Update for Internet Explorer 9 for Windows Server 2008 R2 x64 Edition (KB2761451) It seems likely that something was changed in last night's update, but so far I haven't seen anything on microsoft.com to prove it. I did hear that XP is reaching the end of the road soon. Any ideas?

    Read the article

  • Rsync Push files from linux to windoes. ssh issue - connection refused

    - by piyush c
    For some reason I want to run a script to move files from Linux machine to Windows. I have installed cwRsync on my windows machine and able to connect to linux machine. When i execute following command: rsync -e "ssh -l "piyush"" -Wgovz --timeout 120 --delay-updates --remove-sent-files /usr/local/src/piyush/sync/* "[email protected]:/cygdrive/d/temp" Where 10.0.0.60 is my widows machine and I am running above command on Linux - CentOS 5.5. After running command I get following error message: ssh: connect to host 10.0.0.60 port 22: Connection refused rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(463) [sender=2.6.8] [root@localhost sync]# ssh [email protected] ssh: connect to host 10.0.0.60 port 22: Connection refused I have modified my firewall settings on widows to allow all ports. I think this issue is due to SSH Daemon not present on my windows machine. So I tried installing OpenSSH on my machine and running ssh-agent but didn't helped. I tried similar command to run on my widows machine to pull files from Linux and its working fine. For some reason I want command for Linux machine so that I can embed it in a shell script. Can you suggest me if I am missing anything. I am already having cwRsync installed on my widows and running it in daemon mode using --damemon option. And I am able to login using ssh from windows machine to linux machine. When I issue bellow command, it just blocks for 120 seconds (timeout I specified in command) and exits saying there is timeout. rsync -e "ssh -l piyush" -Wgovz --timeout 120 --delay-updates --remove-sent-files /usr/local/src/piyush/sync/* "[email protected]:/cygdrive/d/temp" After starting rsync on widows, I checked, rsyc is running. And widows firewall setting are set to minimal, and on Linux machine stopped iptables service so that port 873 (default rsync port) is not blocked. What can be the possible reason that Linux machine is not able to connect to rsync-daemon on windows machine?

    Read the article

  • Windows Server 2008R2 Virtual Lab Activation strategies?

    - by William Hilsum
    I have a ESXi server that I use for testing, however, I am often needing to create additional Windows Server virtual machines. Typically, if I do not need a VM for more than 30 days, I simply do not activate. However, I have been doing a lot of HA/DRS testing recently and I have had a few servers up for more than this time. I have a MSDN account with Microsoft and have already received extra keys for Windows Server 2008 R2. I am doing nothing illegal and I am sure if I asked, they would issue more - but, I do not want to tempt fate! I have got 3 different "activated" windows snapshots I can get to at any time. If I try to clone these machines, I get the usual "did you copy or move them VM" message. If I choose copy, as far as I can see, it changes the BIOS ID and NIC MACs which is enough to disable activation. If I choose move, it keeps the activation fine (obviously, I know to change the NIC MAC - I believe I can leave the BIOS ID without problems). However, either of these options keeps the same SID code for the computer and user accounts. After the activation period has expired, as far as I can see, all that happens is optional updates do not work - it seems that the normal updates work fine. Based on this, as you can easily get in to Windows when not activated without any sort of workaround, I was wondering if it is ok just to leave a machine un activated? (However, I obviously would prefer if it was activated!) Alternatively, how dangerous is it run multiple machines on a non domain environment with the same SID? I am just interested to know if anyone can recommend a strategy for me? I have only found one solution that deals with bypassing activation - I am not interested in doing anything remotely dodgy... at a stretch, I am happy to rearm (I have never needed to keep a server past 100 days), but, I would rather have a proper strategy in place.

    Read the article

  • Windows 7 on an EEE PC 901 - Is it a practical change?

    - by Dave
    I am currently running WinXP on my EEE PC 901, and I'm happy to say that it runs really well. But this did not come with out significant manipulation of the OS. Here's the basic steps I took: Install XP Modify registry to install Install bare essential drivers Relocate page file to d:\ (remember, this model has two SSD's, one roughly 3.6gb, and the other roughly 16gb - XP won't run on the bigger drive, only the smaller one) Install remaining drivers skip normal updates, install service pack 2 straight away. modify system registry to place service pack backup folder into new Program Files directory on D drive (where software is being installed). Change My Documents folder to sit on D drive. Install .net framework Install remaining updates and service pack 3 (the hidden backup folders in the c:\Windows directory are deleted after every update as well as the contents of the service pack downloads folder in order to continually free up space). I have also found that Disktrix UltimateDefrag to be brilliant at keeping the system clean and tidy. This is roughly the order I did things in. In this configuration the machine works really well. QUESTION: Can this kind of configuration be implemented with Windows 7 to achieve the same result on this machine? Thanks in advance. Dave.

    Read the article

  • Changing the interface language in Windows 7 Home Premium

    - by Cristián Romo
    A friend of mine has recently purchased a laptop in the U.S. that has Windows 7 Home Premium on it with an English interface. Not being a native English speaker, I'm trying to change the interface language to traditional Chinese. I've looked through the Control Panel in search of something that might let me change the interface language. Naturally, I looked at the Region and Language section and managed to change the formats the computer uses and install a working keyboard, but I haven't found a way to change the interface language. Upon doing some research, I found out that there are two kinds of interface packs, Multilingual User Interface (MUI) and Language Interface Packs (LIP). It seems that MUIs can only be installed through Windows Update, so I looked through the list of updates. To my dismay, the language packs are not present. The optional updates tab doesn't even show up. Many sites show a drop down menu the under Keyboards and Languages tab in the Region and Language options, yet it doesn't show up for me. We also don't have the Windows 7 DVD which might contain this useful file. As far as the LIPs go, I can't find one in Chinese at all, let alone traditional Chinese. Can the interface language be changed in Home Premium at all? If it can, how would I do so?

    Read the article

  • What causes Windows Media Player on Windows 8 to not play the entire library?

    - by somequixotic
    Behavior 1: Verify that the WMP playlist is clear of all songs. Turn on the "Shuffle" and "Repeat" features. Double-click on a music track in the Library. Click the "Next" button (double right angle brackets). A random song from any track in the Library is randomly chosen and played. When observing the Playlist (clicking the "Play" tab), the entire contents of the Library appears in the Playlist. Behavior 2: Verify that the WMP playlist is clear of all songs. Turn on the "Shuffle" and "Repeat" features. Double-click on a music track in the Library. Click the "Next" button (double right angle brackets). The button visually depresses like it has registered the click, but nothing happens. Absolutely nothing. Moreover, the "Previous" button is grayed out. When observing the Playlist, only the one song that was double-clicked appears in the Playlist. What causes Behavior 2? I cannot correlate any specific action I've taken with Behavior 2, and Behavior 1 has been the case as long as I can remember, all the way back to Windows XP. Even earlier during my usage of Windows 8, I recall Behavior 1 working correctly. But suddenly, inexplicably, without changing any settings in WMP, Behavior 2 kicked in, and persists after reboots. I've tried sfc /scannow in an administrator prompt. All system files are in order. I've downloaded all Windows Updates and driver updates. I've attempted to alter WMP options and playback settings to no avail. So... what is causing Behavior 2? Is this an intended, valid behavior, or is something malfunctioning? How would I know what that "something" is? How would I go about fixing it without just reinstalling Windows 8 fresh?

    Read the article

  • Easy solution to monitoring & blocking connections to non-malicious services, IP's, and tracking companies

    - by binarybunny
    Our family lives in the middle of nowhere, so the only high-speed internet available is Verizon's 3G mobile broadband. We have the highest package available, yet continually go over the 10GB limit and get charged $10 every 1GB we go over. We run a business from home, so stopping when we hit the limit is not an option. I've found the majority of connections are to Google, Microsoft, Akamai, Facebook, and other web service companies (mainly google). I know these are harmless connections, but when it costs money for them to monitor our web activity it becomes a serious problem. Here's some things I've done, but I'm sure there's something else that could help before blocking a huge set of IP ranges: stopped using windows (on my machine) use MVPS host file on all computers use firefox on all computers (with don't track me option) ad block plugin on all browsers blocking google updates blocking windows updates block images in browsers (when possible) use comodo (paranoia-level style of blocking..) virus-free computers with ESET NOD32 bought router and installed dd-wrt in attempt to block connections more diligently (and throttle bandwidth if it comes to that) Anything I'm missing? I know Google analytics is on almost all websites, as well as FB like buttons but I would like to be able to stop these connections without blocking use of google services like gmail, etc. Any ideas?

    Read the article

  • DNS Does Not Register at Off-site Locations

    - by Russ Warren
    First of all, let me give you the specifics of our setup: Windows Small Business Server 2008 Domain w/ all applicable updates on the DC The DC does DHCP for the main site The DC does DNS for all sites 3 sites including our headquarters where the DC is located All sites are connected through OpenVPN SSL tunnels terminated by an Untangle box at each site The 2 remote sites us the Untangle box as a DHCP server for their subnet, which assigns the DC as the primary DNS server Collection of Windows XP and Windows 7 workstations connected to the domain Here's the issue: All of the workstations at the main site register with the DNS server on the domain controller fine. As they grab an IP from the DHCP server, it updates the DNS server with the new host record. I have 2 systems (each at different remote sites) that fail to register with the DNS server. I've attempted the following troubleshooting steps: Confirmed the network adapter is using the DC as a DNS server Confirmed 2-way traffic is possible between DC and workstation Verified the "Register with DNS server" setting was checked in the adapter properties Attempted ipconfig /registerdns and received no errors For the time being, I have setup a DHCP reservation for these systems and manually created a host record. This seems to work fine, but I need a solution for any new systems that go out there.

    Read the article

  • Windows XP - Power surge on hub port

    - by Swift-Tuttle
    Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

    Read the article

  • VMware Workstation reboot 32-bit host when starting 64-bit guest

    - by Powerman
    I'm trying to start 64-bit guest (MacOSX and Windows7) on 32-bit host (Hardened Gentoo Linux, kernel 2.6.28-hardened-r9) using VMware Workstation (6.5.3.185404 and 7.0.1.227600). If VT-X disabled in BIOS, VMware refuse to start 64-bit guest (as expected). If VT-X enabled in BIOS, VMware start guest without complaining, but then, in about a second (I suppose as soon as guest try to switch on 64-bit) my host reboots (actually, it's more like reset - normal reboot procedure skipped and BIOS POST start immediately). My hardware is Core 2 Duo 6600 on ASUS P5B-Deluxe with latest stable BIOS 1101. I've power-cycled system, then enabled Vanderpool in BIOS. My CPU doesn't support Trusted Execution Technology, and there no way to disable it in BIOS. I've rebooted several times after that, sometimes with power-cycled, and ensure Vandertool is enabled in BIOS. I've also run VMware-guest64check-5.5.0-18463 tool, and it report "This host is capable of running a 64-bit guest operating system under this VMware product.". About a year ago I tried to disable hardened in kernel to ensure this isn't because of PaX/GrSecurity, but that doesn't help. I have not checked 32-bit guests with VT-X enabled yet, but without VT-X they works ok. ASUS provide "beta" BIOS updates, but according to their descriptions these updates doesn't fix this issue, so I'm not sure is it good idea to try it. My best guess now it's motherboard/BIOS bug. Any ideas?

    Read the article

  • I am trying to set up a ubuntu sever 12.04 on my machine [migrated]

    - by Jseb
    I am trying to set up a server on my home network which will eventually host rails. I am not great in linux server and i try to follow the prompt. I did succesfully get to a black screen which then prompts me to a username then password to then do anything ( assuming). However here what i try to do I kinda fellow his tutorial http://www.ubuntugeek.com/step-by-step-ubuntu-11-04-natty-lamp-server-setup.html but however the command where not 100% like him not in same order but same idea. Then i want to install ubuntu server with gui here the command i try with sudo apt-get upgrade sudo apt-get install ubuntu-desktop Which however give me the following error Err http... inRelease w Failed to fetch ht... So been ignored if i try the desktop one i get E: unable to locate package ubuntu E: unable to locate package desktop So i am assuming i am not connected to the internet, so i try the following command sudo vi /etc/network/interfaces here the output it gives me and i know my gateway on my laptop is 192.168.1.1 address: 192.168.1.148 netmask: 255.255.255.0 network: 192.168.1.0 broadcasts: 192.168.1.255 gateway: 192.168.1.1 Btw i do not know the command to get out of vi and saving it. Err http://us.archive.ubuntu.com precises InRelease Err http://us.archive.ubuntu.com precises-updates InRelease Err http://us.archive.ubuntu.com precises-backports InRelease Reading package lists... Done W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise/InRelease W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-updates/InRelease W: Failed to fetch http://us.archive.ubuntu.com/ubuntu/dists/precise-backport/InRelease

    Read the article

  • Updating Dell PowerEdge firmware on Ubuntu?

    - by Shtééf
    The company I work for recently got hands on a batch of second hand PowerEdge SC1425 machines. We'd like to put these to good use. Our operating system of choice is Ubuntu Server 10.04 64-bit, which installs just peachy on this type of machine. Now I'd like to install the firmware updates from Dell, which are apparently marked as recommended. This includes the updates for the BIOS, the BMC, and possibly some other hardware. I find it incredibly difficult to locate the files on the Dell website, and install any of them on an Ubuntu system: I downloaded the file OM_6.2.0_SUU_A01.iso. I believe I've read that the SUU DVD should be able to update any recent PowerEdge. Is this correct? Is this the latest version? Besides the version number, does A01 have any meaning? Is this image bootable? (At the moment, I just nosed around with a loop device mount.) Running /bin/bash ./suu from the DVD, I get: # /bin/bash ./suu ./suu: line 262: ./java/linux/i386/bin/java: No such file or directory The file exists and is executable, though. But I cannot execute it directly from the shell either.

    Read the article

  • Upgrading openSUSE 11.1 with Plesk Panel 9.3 to PHP 5.3

    - by Jonathan Hogervorst
    Hello, I'm running a VPS with openSUSE 11.1 (i586). On the VPS is Parallels Plesk Panel 9.3.0 installed. The current PHP-version is PHP 5.2.11. I want to upgrade PHP to PHP 5.3, but I can't find good instructions on how to do this. If I check for updates in Zypper, it says this is the latest release. In the Plesk Updates isn't an update either, both via the webbased interface and the command line interface. On Software.openSUSE.org I can find packages for PHP 5.3.1 in both the server:php/server_apache_openSUSE_11.1-repo and the server:php/openSUSE_11.1-repo (can't post the link because I'm a newbie here). But if I add one of those to Zypper, I still don't see an update. Is there here somebody who knows how to do this? And is it completely safe to update that way? I don't want to end up with a broken VPS... Thanks! Jonathan

    Read the article

  • RAID Volume is no longer showing in Raid Controller BIOS and in Windows

    - by Gordon
    Hi all, I have installed some critical Windows Updates yesterday and now my external RAID Volume no longer shows in Windows Vista x64. All updates went through successfully. For their description, I cannot see how they should relate to the issue, but this is the only change that happened, so who knows. Anyway, here is the details: I have an external eSata enclosure that is running on a SiI4726 controller. I can connect to the controller with it's management utility from the computer the enclosure is connected to. The three drives in the enclosure show up as JBODs. I had those drives configured to be one logical RAID5 drive. RAID management is done through a SiI3132 SoftRaid controller. The Raid Management Utility just shows empty channels where it usually shows the Raid Group. In the Windows Disk Manager, I can see an unknown unitialized device. This is fine according to the setup manual. What it doesn't show is my Raid drive. It's gone. Also, when booting Windows, the BIOS of the controller used to show the RAID volume before booting the OS. This is not happening anymore. Updating drivers and firmware did not help. I have made sure the drivers and firmware are compatible to each others. And like I said, it used to work before. Any clues?

    Read the article

  • Outlook 2010 OSC with SharePoint 2010 documentation or help

    - by skypanther
    I'm looking for documentation or help to set up Outlook 2010's social connector to work with SharePoint 2010. I can't find much info other than some MS videos and blogs saying that it's possible. They say "we are already connected to SharePoint, so let's add in the XYZ connector..." but don't tell how they connected to SharePoint. Server A: Win2K8 x64, Exchange 2010 x64, domain controller Server B: Win2K8 x64, domain member, SQL Server 2008 R2, SharePoint 2010 Client: Win 7, domain member, with Office 2010 RTM (most every component installed, including the OSC) I've added my domain users to a group. In SharePoint, I granted that domain group permissions to access the site. As any of the domain users, I can use IE to log on the My Sites pages. From there, I can add lists, blog posts, status updates etc. In Outlook, I can add a SharePoint contact to my Contacts list. But, all I see in the People Pane is emails my users have exchanged. I don't see any of the other SharePoint status updates. When I try to use the "Add this person to a social network" link to connect them with my My Sites, the process fails. It doesn't give any sort of error message that helps me figure out why. Just a "Try Again" button that likewise fails. Any guides, links, suggestions? I'm pretty novice-level with SharePoint but mildly adept with the other technologies.

    Read the article

  • Apt pin and self hosted apt repo

    - by Hamish Downer
    We have our own apt/deb repository with a handful of packages where we want to control the version. Crucially this includes puppet, which can be sensitive to versions being different. I want our desktops to only get puppet from our repository, but also for people to be able to add their own PPAs, enable backports etc. The current problem we have is backports on Ubuntu Lucid. Some important lines from /etc/apt/sources.list: deb http://gb.archive.ubuntu.com/ubuntu/ lucid main restricted universe multiverse deb http://gb.archive.ubuntu.com/ubuntu/ lucid-updates main restricted universe multiverse deb http://gb.archive.ubuntu.com/ubuntu/ lucid-backports main restricted universe multiverse deb http://security.ubuntu.com/ubuntu/ lucid-security main restricted universe multiverse deb http://deb.example.org/apt/ubuntu/lucid/ binary/ And in /etc/apt/preferences.d/puppet: Package: puppet puppet-common Pin: release a=binary Pin-Priority: 800 Package: puppet puppet-common Pin: release a=lucid-backports Pin-Priority: -10 Currently policy says: $ sudo apt-cache policy puppet puppet: Installed: (none) Candidate: (none) Package pin: 2.7.1-1ubuntu3.6~lucid1 Version table: 2.7.1-1ubuntu3.6~lucid1 -10 500 http://gb.archive.ubuntu.com/ubuntu/ lucid-backports/main Packages 100 /var/lib/dpkg/status 2.6.14-1puppetlabs1 -10 500 http://deb.example.org/apt/ubuntu/lucid/ binary/ Packages 0.25.4-2ubuntu6.8 -10 500 http://gb.archive.ubuntu.com/ubuntu/ lucid-updates/main Packages 500 http://security.ubuntu.com/ubuntu/ lucid-security/main Packages 0.25.4-2ubuntu6 -10 500 http://gb.archive.ubuntu.com/ubuntu/ lucid/main Packages If I use n= instead of a= then I get Package pin: (not found) I'm just plain confused at this point as to what I should use. Any help appreciated.

    Read the article

  • Updating a backup image (.wim and/or Acronis .tib)

    - by Backdraft
    Anyways, I've got a Windows 7 installation that I want to make a generalized backup image of so I can use it for future installs on not only my desktop from which the image is to be derived from, but also other systems with dissimilar hardware. Therefore I've arrived at either 2 options, using either sysprep/imagx from WAIK (guide here), or the simpler Acronis True Image w/ their Universal Restore addon. Of course, they create distinct image file types, .wim and .tib respectively. What I'd like to do is to periodically update this image, say with Windows Updates, by booting it to either a physical partition or using virtualization (VirtualBox/VMWare), perform the updates, and save the updated .wim or .tib image file again. What's the simplest way I could do this? Another question is, I created this generalized backup image on a 500GB Seagate 7200RPM HDD. Say I get an SSD as an OS drive in the future, can I just deploy this backup image to the SSD normally, or are there any potential problems to be aware/avoid (ie. is it best to completely reinstall the OS on the SSD from scratch, or can I use the image created on the normal HDD with no issue)? Thanks and Happy Holidays.

    Read the article

  • AWS Linux EC2: yum won't run with plugins

    - by Patrick
    Short Version: yum commands on my Amazon Linux EC2 AMI only work with --noplugins. Long Version: A couple of days ago, I ran yum update at the behest of the SSH Login MoTD telling me I had updates to install. About midway through the update (specifically while updating the kernel), the update abruptly ended (79 of 138 items completed). The website I host on EC2 got weird for a few minutes, but eventually seemed to stabilize back out (maybe EC2 restarted itself?), and I didn't have further issues (other than MySQL started running out of memory, but I think that's probably unrelated to this). Today, I went to install gcc-c++ (with yum install gcc-c++). When I did, I got the following message: Loaded plugins: priorities, security, update-motd, upgrade-helper Config error: Command "updateinfo" already defined and I get that for any command I can think to run using yum. However, If I throw in the --noplugins flag, then magically it seems to work. To be clear, when I installed a different package a week ago, it worked totally correctly, so the yum update is the only thing I can think of that changed. I could find nothing on Google with regard to "updateinfo" already defined (with and without quotes). I tried running yum update --noplugins which spit out a message telling me that I should have run yum-complete-transaction instead, but proceeded to try to update something on its own. When that completed, I tried yum-complete-transaction but that gave me a message about the transactions not lining up correctly, so it removed the old transaction (Probably since I should have completed the first transaction before trying to update again, if I had known). Based on the SF question "Linux EC2 Broken Yum", I've also tried yum clean all --noplugins (fails the same with plugins) which just gives me Cleaning repos: amzn-main amzn-updates rpmforge Cleaning up everything I also tried package-cleanup --problems Loaded plugins: priorities, update-motd, upgrade-helper No Problems Found and package-cleanup --dupes Gives a lot of dupes, so I pasted them here: http://pastebin.com/VVFQEkTT instead of inline. At this point, I'm not sure what else there even is to check.

    Read the article

  • Upgrade an Ubuntu 8.04 installation with VMware Server 1.0.8 and lots of guest OSes to Something Els

    - by Glyph
    I have an Ubuntu 8.04 (Hardy Heron) host machine which is running a whole slew of virtual machines in VMWare Server 1.0.8. Among other guest OSes, there is every release version of Ubuntu since 6.06, OpenSolaris 2009.06, and Windows XP. Right now I access these VMs from a variety of client OSes as well; Linux and Windows via the VMWare server console, and MacOS via X-forwarding the host machine's server console. I'd like to upgrade the host to Ubuntu 10.04 (Lucid Lynx), but from what I can tell, getting VMWare Server 1.x to work on a more recent version of Linux is a real pain. While VMware Server 2.x is a bit easier, it's still not packaged as Debian packages, so installing security updates is a big chore. As long as I'm upgrading anyway, I'd like to move to a virtualization solution that will allow me to automate applying updates. The options that I'm aware of right now are KVM (managed via virt-manager) and VirtualBox (as managed by its own tools or via its own libvirt bindings), but I'm open to other suggestions. For each option, I'd like to know how do I convert my guest images to the new format? am I going to have to re-activate my Windows guests (alternatively, "If the virtual hardware is different by default, can I avoid re-activation by changing some virtualization configuration to provide me with more similar virtual hardware") what are the management options like for each client OS (mac, linux, windows)? Thanks.

    Read the article

  • Setting "Run WWW service in IIS 5.0 isolation mode" does not persist in IIS 6

    - by Saul Dolgin
    Our IIS server was recently patched with the latest Microsoft Security Updates and since then, I am unable to enable the "Run WWW service in IIS 5.0 isolation mode" setting. This setting was enabled prior to patching and somehow changed during the updates. I have tried both using the IIS Manager console and the adsutil.vbs approach to change it. Either way, after resetting IIS for the change to take effect, when I go to verify that the isolation mode setting is enabled (true) I find that is reverts back to being disabled (false). Now... The patches have already been rolled back, however the setting still does not persist when I enable it. While I am trying to research the patches that were applied to see if there is a known issue (or perhaps a change in this setting's behavior) I was hoping someone else might have come across the same problem. Any help towards a workaround would be greatly appreciated! >cscript adsutil.vbs set W3SVC/IIs5IsolationModeEnabled TRUE IIs5IsolationModeEnabled : (BOOLEAN) True >iisreset Attempting stop... Internet services successfully stopped Attempting start... Internet services successfully restarted >cscript adsutil.vbs get W3SVC/IIs5IsolationModeEnabled IIs5IsolationModeEnabled : (BOOLEAN) False

    Read the article

  • Adobe premiere CS5 problem with the display driver

    - by user30179
    This error is really hindering our project. I get an error, it started showing-up June 16th 2010. There are no windows updates at the on the same date as the error, other than (Windows Defender) Seems to happen when working with Image overlays. ERROR: "The NVIDIA OpenGL driver detected a problem with the display driver and is unable to continue. The application must close." We opened the side of the case in the possibility there is an over heating problem. Nvidia Driver ver 8.16.11.9175 (nVidia Quadro FX 1700) I am running: Windows 7 x64 Adobe premiere CS5 Production nVidia Quadro FX 1700 (MRGA14L) 4 Gig ram RAID 10 2 750GB drives Duo core 3.0 6MB L2 Cache This is at least three other people that have come across this error: NVidia Forum EVGA Forum NVidia Forum UPDATE: Having the case open did not help. I also installed New Nvidia drivers now I get a different error: *ERROR:*Your hardware configuration does not meet minimum specifications needed to run the application. The application must close. I ran Windows Update and installed all four updates so now I am waiting to see if the error occurs again. Anything beyond this I am out of options.

    Read the article

  • Win2008/IIS7/fx2.0 - 500.19 error

    - by Keith Barrows
    I installed new boxes at the beginning of the week. 1) Web Server on Win2008 x64, IIS 7 + all updates 2) DB Server on Win2008 x64, SQL 2008 Ent + all updates I configured my websites, set up host headers and DNS entries, worked through some problems on my handlers and finally got it all running Wednesday morning. Our team has been using it since then. This morning I came in and everyone of us is getting a 500 error. Error Summary HTTP Error 500.19 - Internal Server Error The requested page cannot be accessed because the related configuration data for the page is invalid. Detailed Error Information Module IIS Web Core Notification Unknown Handler Not yet determined Error Code 0x80070005 Config Error Cannot read configuration file due to insufficient permissions Config File \?\C:\RivWorks\dev\web.config Requested URL http://dev.rivworks.com:80/login.aspx Physical Path Logon Method Not yet determined Logon User Not yet determined Config Source -1: 0: Links and More InformationThis error occurs when there is a problem reading the configuration file for the Web server or Web application. In some cases, the event logs may contain more information about what caused this error. I’ve gone through the KB articles, made sure IIS_IUSRS had read permissions and am now stumped. What bothers me is IIS is looking in \?\C:\ instead of just C:. What is happening? TIA

    Read the article

  • Cannot find FIS partition 'initramfs'......... need help!!!

    - by vikramtheone
    Hi Guys, I have a Ubuntu 9.04 Linux running on Freescale's i.MX515(ARM Cortex based) board with me. There were about 250 updates pending and I did that today, well some of the updates failed because of the infamous errors: E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: Couldn't rebuild package cache E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. So, when I do the 'sudo dpkg --configure -a' I get new errors related to FIS partition: Cannot find FIS partition 'initramfs' User postinst hook script [/usr/sbin/flash-kernel] exited with value 1 dpkg: error processing linux-image-2.6.28-18-imx51 (--configure): subprocess post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of linux-image-imx51: linux-image-imx51 depends on linux-image-2.6.28-18-imx51; however: Package linux-image-2.6.28-18-imx51 is not configured yet. dpkg: error processing linux-image-imx51 (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-imx51: linux-imx51 depends on linux-image-imx51 (= 2.6.28.18.23); however: Package linux-image-imx51 is not configured yet. dpkg: error processing linux-imx51 (--configure): dependency problems - leaving unconfigured Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.28-18-imx51 Cannot find FIS partition 'initramfs' dpkg: subprocess post-installation script returned error exit status 1 Whats going wrong here, need help!!! I'm a newbie. Regards Vikram

    Read the article

< Previous Page | 80 81 82 83 84 85 86 87 88 89 90 91  | Next Page >