Search Results

Search found 2803 results on 113 pages for 'manca weeks'.

Page 85/113 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

• Windows XP - Power surge on hub port

  - by Swift-Tuttle

  Hi, Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

  Read the article

• Website always having DNS problems

  - by Root

  I moved my website from shared hosting to VPS. When it was in shared hosting all I did is updated my name servers whereas now I got my own VPS server and I used one of my domain sjdpublishing.com as the primary domain for my VPS. I created nameservers as ns1.sjdpublishing.com and ns2.sjdpublishing.com and then my actual website is creativeproperty.com.au which are pointing to ns1.sjdpublishing.com and ns2.sjdpublishing.com I am having repeated problems with my domain creativeproperty.com.au a few weeks back I had a problem which was resolved by flushing DNS and later I got similar problem which was not resolved by flushing DNS, I posted a question here and someone answered me to go to Network Settings in my MAC OSX and remove the IP as in my MAC terminal nslookup creativeproperty.com.au points to my router IP and I fixed this problem Now many of my clients were complaining that they are having same troubles accessing my website. I don't know whether its to flush DNS or change network settings or other issues. Can anyone please check my domain creativeproperty.com.au and sjdpublishing.com are having correct records or not and also can anyone tell me the best solution for this issue?

  Read the article

• Mod_pagespeed, Varnish and Apache cache issues after new code pushes

  - by WerkkreW

  I have a rather strange issue. In my environment we are running a load balanced cluster of 8 apache servers with a master-master MySQL backend. In front of apache we have Varnish in the cache layer. We have been running Apache mod_pagespeed for several weeks now and for the most part it has been working great. The issue arises when we do fresh code updates from Git, and and/all of the JS/CSS assets change. Basically the problem appears to be two fold. One, after the code push we generally take the opportunity to flush varnish, restart apache, and restart varnish. In doing this all of the mod_pagespeed combinied/minified files are cleared out ensuring that all of the new JS/CSS assets are fresh. The problem is, upon doing this the file names that mod_pagespeed creates change, but the old files (appear) to be still cached for many people client side leading to very unexpected results. However, if we do not restart apache, the changes to the files may or may not appear client side due to the cached minified assets. The simple solution is to disable mod_pagespeed, however I would rather not do that as it has made a fairly large impact in performance. I feel as if there must be a better way to deal with the inconsistencies in cache between the client and server to prevent having people to go to great lengths or perform a large number of page refreshes to see a working page. I can provide configuration snippets if anyone needs them. If you would like to inspect the site, source, headers, or anything try the following addresses: http://wellplayed.org http://wellplayed.org/tv Thanks in advance!

  Read the article

• How to prevent an SSD from disappearing from BIOS

  - by Midimatt

  I've only recently upgraded my old machine to a new one with a brand new 60gb SSD as my boot drive and a 1TB main drive. Paranoid about completely breaking my SSD, I read up on a lot of issues that I needed to watch out for, including making sure AHCI was turned on and trim enabled. PC has been working fine for a few weeks now, until today. My wife was watching some TV on the machine when it started to act strange and eventually blue screened. She rebooted and the boot mgr was missing. When I got home from work I checked the BIOS and the drive had disappeared. I panicked and looked up some possible fixes, and I discovered a large amount of people having problems with the drive firmware, especially on OCZ Vertex and Agility drives, and my drive is an Agility 3 drive. The problems included blue screens followed by missing drives, and a solution was to reset the CMOS and try again. This worked, and now everything seems to be working fine. My question is, is there any way to prevent this from happening? Am I missing a setting for my SSD? All of the posts I found were from early to mid-2011 nothing for the end of 2011 to 2012. So I am wondering if I've missed anything. EDIT: Checked my drives firmware and it is 2.15, which has had issues reported by users.

  Read the article

• What's Keeping My Computer Awake?

  - by phantomdata

  Hey guys, First the question; How do I figure out what is preventing my Windows 7 computer from going into sleep mode? Second; some background... I've been struggling with this for a few days and am utterly perplexed. I setup sleep mode on my Windows 7 PC a few weeks ago, and all was well. The PC would sleep as expected and I was snuggly in knowing that my computer was saving power and some wear and tear on the components (we'll leave the 'is it better to sleep' debate for another thread/day, please don't start it). Well, I noticed the other night that my system stopped ever going to sleep. I set the sleep time down to 1 minute and wandered fully away from the PC (ensuring that no errant mouse or keyboard movements would occur) and the PC never went to sleep. I've also observed this over longer intervals as well, such as overnight. I have sleep mode enabled, of course "multimedia settings - When Sharing Media" is set to allow the computer to sleep. "powercfg -lastwake" show nothing of interest, since it never goes to sleep and can't wake up. "powercfg /requests" shows 3 entries - all "[DRIVER] ?". I assume that 2 of these are my mouse and keyboard - as I've recently used them to run the powercfg command. I'm at a loss for the third though. I've unhooked all USB peripherals save for my keyboard and mouse. Wake on LAN is disabled in my BIOS. I know that you can disable all apps from waking/preventing sleep - but I want the ability to remain for those apps that do legitimately need to keep the system awake. So; does anyone know of a way to figure out what the 3rd phantom "[DRIVER] ?" is in powercfg /requests?

  Read the article

• How should an experienced Windows SysAdmin learn Linux? [closed]

  - by Systemspoet

  I have a new hire starting in a few weeks who is an experienced Windows SysAdmin. I think he's fairly senior on the Windows side, with a pretty deep AD understanding and experience with Exchange 2007, 2010, and exchange migrations. He's done a little PowerShell but I suspect more of the "run this command to do this" variety then "write a script to do this" sort. However, we are a mixed shop and (he knows this) I expect him to become a reasonably competent Linux SysAdmin over time. I'm looking for good starting points to bring him along. I have over ten years of Linux/UNIX experience, so it all sort of seems intuitive to me, but I've been thinking about the toolkit you actually need to be productive in the Linux CLI world. Just to be able to use the machines at all, off the top of my head... vi Basic CLI stuff -- move around, rename files, copy files, tar, gzip, changing passwords, finding relevant manpages, keep track of where you are, find things in your history, etc, etc. More advanced things that I take for granted but are actually pretty hard -- doing things with 'find', extracting relevant text via 'awk' and/or 'cut', knowing when to use 'grep' and when to use 'grep -e' or 'egrep'. Distribution specific stuff... compiling software, rpm, yum, apt-get, you name it. This all seems pretty basic to me, but when I think back to 1995 when I was first learning my way, some of those things took me years to master. So my question is -- where should I send him to pick up those skills? I'm not just thinking of classes, but rather also websites and books? Where do you all suggest as a starting point for picking up Linux skills?

  Read the article

• Intranet machines refuse to talk anymore

  - by ashes999

  I have two machines on the local intranet. They used to be able to talk to each other (ping, share files, etc.). Both are not successfully connected to the internet. The problem machine (lets call it test machine) can't talk to my main machine. The test machine can ping other machines on the intranet (at least one of my coworkers), but not mine. Odd. When I try to ping it from my machine, by machine name, I get Destination host unreachable. Both machines are on the intranet, with the network configured as Work Both machines have Windows Firewall disabled temporarily Both machines can talk to the internet (Google, SO, etc.) Neither machine can ping the other I need help resolving this. What I really want to achieve, is to remote into the test machine from my main machine, like I used to be able to do a few weeks ago. Some notes: Tried arp -a on both machines. I don't see the other machine's IP listed. Both machines have stable IPs; neither seems to have an IP conflict The configuration under ipconfig /all on my main machine mathces my coworker's machine. The test machine can ping his machine, but not my machine. The target machine times out trying to ping the main machine; the main machine gives me Destination host unreachable. I have rebooted both machines (several times) to no avail I have /release and /renewed both machines several times

  Read the article

• Emails not arriving to client's inbox. Server not on black list.

  - by EBroker

  Hi, I'm sending emails to my clients who are hosted on GoDaddy for both their website and email. For some reason, my system's emails are no longer reaching their inbox. My email server sends them alerts when an action is completed. These alerts are posted in my system and my email server is sending these out, but there are no bounceback emails. There have been no issues in the past year, but in the past two weeks the problem started cropping up. My clients were forced to switched to a web-based email provider like Gmail, Hotmail, Yahoo to receive their alerts. This is a temporary solution that works in the interim. I contacted GoDaddy and they are indicating that I am not being blocked. I also have a GoDaddy account and can confirm that my alerts aren't arriving in the inbox regardless of whatever safe sender items I employ in the webmail interface. I even switched all the system's outbound emails to Plain Text, no luck. Can anyone provide some insight and point me in the right direction? Thank you in advance.

  Read the article

• Datastage 8.7 installs fine on Window7 without any errors but it can not launch localhost:9080 web console

  - by user265273

  When I launch the web console, I get page can not be displayed error. What I have tried so far: I have re-installed DS about 7 times, and each time, I get same errors. I added entries in etc/hosts file for local host and my host name. I have turned off firewall. My hardware/software setup. My host system is window8.1. My vmware workstation is 7. The guest os is windows 7 enterprise x64. I have installed 10g, and given dba role to public. I have installed VS 5, and ms visual c++ 2010 express. I have installed msxml. IE version is 10. Firewall is off. My internet works fine It passed all the DS requirement tests and install completed successfully. When I launch my vmware guest instance, I do get SQL5000c error upon boot which I have tried to ignore in some installs and in some, I used db2systray -clean command to get rid of it. But that has not helped solve the webconsole connect failure to my host. I have spent over 2 weeks exclusively on this issue and badly need some help.

  Read the article

• Windows 7 pc freezes for an indeterminate amount of time after unlocking

  - by pikes

  Not sure if this type of question is appropriate for this forum, but I've tried everything I can think of to solve this problem aside from format/reinstall. I recently got a new work PC (Dell optiplex 755) with windows 7 professional x64. Standard developer software installed for .net development: VS2008, VS2005, SQL management studio, office 2007, etc. Recently I've been having this weird problem where after I lock my pc, when I try to unlock it, the screen will be black for awhile after unlocking. I can ctl+alt+del and put my password in but then it just goes black. The amount of time on the black screen seems to be related to the amount of time I am away from my PC. If only away a few minutes, it'll take about a minute to get to the desktop. If away for an hour, could take up to 15 minutes. If I lock it and go home for the night, I have to restart my PC in the morning (I've let it sit for an hour after a night of being locked and nothing happened). It doesn't do it every time but definitely the majority of the time. One weird thing I've seen is that if I remote into my machine before trying to log back in it does not do it. I uninstalled all software back to the point when I remember it started happening and it still does it. I was using this PC for a few weeks without this problem happening at all. Anyone know what my next troubleshooting steps could be? My IT department tried to fix it by moving my old profile to another disk and having me log in, effectively recreating a profile from scratch but that didn't solve it. As I said above if this isn't the right forum for these types of questions please let me know. Thanks in advance!

  Read the article

• How to get a list of Dovecot IMAP users

  - by Colt McCormack

  How do you get a list of users for a dovecot email server that connect via IMAP (as opposed to POP)? Our server is setup to authenticate via LDAP/PAM. Is there an easy way to get a list of the users who are accessing their mail via IMAP, rather than POP? I am about to migrate our server to Google Apps and want to migrate all of the mail for my IMAP users only (couple hundred out of several hundred total users). POP mail will be migrated separately from the client end obviously. I would much rather migrate only the IMAP users rather than the whole domain which would include migrating a bunch of POP mail left in the server that has already been read/sorted/deleted in the client's email program. Migrating all of that extra useless leftover POP mail could waste weeks of migration time. I suppose parsing some logs to see who has connected on an IMAP port (995 or 993) would give me a list would work if someone could help me do that. I know I have the raw dovecot logs, but am hoping for a cleaner solution.

  Read the article

• Mercurial no longer working in NetBeans?

  - by John Isaacks

  I have been using Mercurial inside NetBeans for a while now. For the past few weeks now Windows Explorer has been crashing for various reasons, including every time I right click. Finally someone suggested I try uninstalling TourtoiseSVN and TortoiseHG since they affect Windows Explorer directly. I uninstalled both last week since I don't ever use them (I either user the NetBeans interface or use the command line interface.) Since then my Windows Explorer stopped crashing. Today I noticed that in NetBeans it is no longer showing me any of the Mercurial features. I pull up a command prompt and its not working their either. It seems like uninstalling TortoiseHG also uninstalled Mercurial altogether, which was not intended. I went to http://mercurial.selenic.com/wiki/Download to download the 64bit 1.8.4 .exe version of Mercurial for Windows. I installed it, and I can now use the command line. However it is still now working in NetBeans. Does NetBeans require Tortoise to work? Is there something else I am missing?

  Read the article

• Issues with returned mail sent to web-based email domains

  - by Beeder

  My company is having issues with returned mail that we send out to external domains. A few weeks ago we replaced a firewall and changed ISP providers and began subsequently having issues RECEIVING emails from external sources because we hadn't updated our new IPs in the DNS records. After making the necessary configuration changes and setting up SMTP forwarding over port 25 to our mail server, everything was working fine up until a few days ago when we started having mail sent out returned to us. We aren't having any trouble communicating internally (to recipients on our domain) but it seems we're having trouble with outbound messages to web-based email recipients. (@hotmail, @live, @yahoo, @gmail...etc) Currently we are running Server 2003 SP2 and exchange 2003. I'm very unfamiliar with configuring Exchange and could really use some help in narrowing down the possibilities. I did some research and am becoming suspicious of Sender ID being the culprit due to our recent IP address change and the likelihood that Sender ID is identifying us as a fake domain. Am I going in entirely the wrong direction? Any input or guidance would be infinitely appreciated. This is the message that is returned when an outbound message fails...this particular one was sent to my @live.com account for testing purposes... Your message did not reach some or all of the intended recipients. The following recipient(s) could not be reached: [email protected] on 5/17/2012 3:02 PM There was a SMTP communication problem with the recipient's email server. Please contact your system administrator. Unfortunately, messages from xx.x.xx.x weren't sent. Please contact your Internet service provider since part of their network is on our block list. I tried a reverse DNS lookup and found that we are set up as a Forward-confirmed reverse DNS. So do I just need to contact my ISP and have them correct their DNS records or is this something I can solve on our end??

  Read the article

• How can I diagnose what's causing Outlook 2007 when sending an attachment to fail with error 800CCC0F even though the message was sent?

  - by James

  As the title suggests, I've got an issue where outlook 2007 is reporting it failed to send email with error 800ccc0f (unexpectedly terminated connection) but only with attachments. The email is actually sent, but outlook keeps retrying (stays in the outbox), generating more emails to the original recipient (which do get delivered) I've got QMail on the server side supporting a half dozen domains. It doesn't appear to matter which account I send from. I can successfully send attachments via alternate mail clients (webmail, thunderbird) while outlook is failing, or send messages without attachments; so it's seemingly not the accounts themselves or serverside, which leaves outlook as the culprit. There doesn't appear to be any pattern to the failures, and it's not consistent (I successfully sent an attachment as recently as 3 weeks ago) so I'm at a loss as to where to look. Qmail logs don't look any different between successes and failures. Has anybody seen this before/have a solution? UPDATE : It appears it's only PDF files that this occurs with, so I'm even more stumped. I can send html/docx/txt and zip, UNLESS the zip file contains a pdf ... whiskey tango foxtrot

  Read the article

• ubuntu 12.04 kvm virtual server network setup, can't get the machine to be connectable

  - by xyious

  I have worked on my Ubuntu Server host for weeks now and I just can not manage to get the virtual machines into the network.... here's what I need to do: I need to be able to create virtual machines that have IP addresses that can be reached from the outside (192.168 network). I need to be able to connect to the virtual machines through ssh, ftp, http and preferably https, anything else doesn't matter that much. So far everything seems simple enough and I have a lot of leeway in terms of IP address range and server/client configuration. I have the option of taking part of a /24 net as most IPs aren't used, and if it's absolutely necessary I have the option of creating a new /24 subnet. Also have the option of reformatting and reinstalling OS on the host and recreating the virtual machines as nothing has been done other than trying to get virtual machines to work. I would prefer if the virtual machines were just part of the normal network which would be 192.168.5.0/24. The host machine has 2 network cards so I don't even necessarily need the Host to be connectable in the same /24 network. I have tried (I think) just about everything from about 5 different tutorials on bridging (giving br0 the same IP that eth0 used to have (Host is able to connect to VM and vice versa, VM doesn't have outside network access), having eth0 set up like it always was and having br0 have a different IP (same as above), NAT with port forwarding (which I would have preferred not to use but will if it works), turning off one of the hosts network cards and just using one of them, different subnets.... etc. I do know my way around iptables fairly well.... Host is 64bit Ubuntu Server 12.04, using libvirt/kvm. edits: Local network is 192.168.5.0/24, host has static ip 192.168.5.254, GW .5.1 which is also nameserver. We have a second Local network at 192.168.10.0/24 with .10.1 GW, but both hosts and VMs were supposed to go into the .5 subnet. The .10 subnet isn't required, but it wouldn't be horrible if the Host were only accessible in the .10 subnet.

  Read the article

• How to diagnose a spontaneous reboot?

  - by Spectralist

  My computer reboots, seemingly completely at random, about once every week to two weeks but has occasionally gone months. It just goes from running fine to the POST with no error messages or anything and doesn't seem to be due to heat or usage as it's happened a couple of times when the computer has booted just a few moments ago and is idling. It's been happening for as long as I've had this computer, almost two years. It's happened in both Vista and Windows7. I strongly suspect it's a hardware problem. But due to the rareish and random nature of the crashes my normal strategy of just removing hardware until the problem stops isn't really practical. My guess would be Power Supply, Ram, or Motherboard. But I just don't know how to test an issue this random and want to figure out how to confirm which it is before I go replacing things. So is there some software or hardware that can be used to test these sorts of errors? I did run memtest86 for about 8 hours without finding any issues. And the power supply is more than capable of running my system.

  Read the article

• How to find Stolen MacBook with iCloud

  - by user1518089

  My MacBook Air was stolen about 6 weeks ago. Through iCloud and "Find Phone", I have some pictures and a location down to about 2 blocks. The pictures are from the current user taking photos which automatically appear on my local devices. (Yes they probably saw my pictures until I stopped taking them. Yes, they are stupid.) I was thinking about going there and hanging out until I recognized the current users, but it is in a very bad neighborhood and I would be noticed. The police have not done anything. Yes, the MacBook can be locked or a message sent. I am hoping to get it back. Does anyone have ideas on how to track them down? While Find Phone shows their location, it does not report an ip address. Is there a way to get an ip address? Does Facebook face recognition work on strangers? Come on tech geniuses, help me play detective. It does not have Drop Box installed.

  Read the article

• Trying to migrate old server to new. Getting duplicate name errors

  - by SpaceCowboy74

  I have an existing server on my network that is running under windows 2000 with SQL Server 2000 on it. We are in the process of moving the server to a windows 2008 platform, with SQL 2008 as well. A few changes are happening though. For one, applications that were on the old server, will now be on a new application server. The issue is, the developers of the original applications hard coded the server name in the apps and/or batch files. I could change all the code, but that would require weeks of work. My original idea was to change the hosts and lmhosts files to point to the new servers with a different IP. So i implemented the following where oldserver was the original server and server is the new one brought online: hosts: 192.168.1.10 oldserver 192.168.1.15 server lmhosts: 192.168.1.10 oldserver #pre 192.168.1.15 server #pre Problem is, when i try to do this, i get the following errors: \\server\c$ Logon Failure : The target account name is incorrect. and \\oldserver\c$ A duplicate name exists on the network. I know about renaming servers in AD, but can't do so yet as the original server is in production and i cannot rename it without breaking a lot of things at the moment. I'm wanting to do a proof of concept to the management before renaming the servers. Any idea how i should resolve this?

  Read the article

• When buying hardware, what sites do you trust for information? [closed]

  - by Matt Dawdy

  I won't ask "what laptop should I buy" since the information is likely to change very quickly. However, I am about to buy a laptop, and I honestly don't know where to begin researching this based on my needs. I am hoping that asking about specific sites that do reviews/recommendations that this will still be on topic. I read the 6 guidelines for subjective questions and believe that this question scores favorably. I'm starting a new job in a few weeks, and they want to know what specific laptop to purchase. I'd like to get the most for their money and get a machine that will not need to be replaced in a year. When looking at a site like Dell, it's hard to get a full picture of the performance of a laptop. Does it work with a docking station, and if so, what kinds of video outs are on it? Will it work well when compiling several large projects in .Net? Has anyone had any issues with the machine getting flaky when dragging it from work to home and back all the time? etc. So, if people would enter in their preferred sites they use when researching hardware, and why they prefer that site (x is great for laptop comparisons, y is great for gaming machine reviews, etc) the I hope that this can be a question with valuable answers to others than just myself.

  Read the article

• Very high Magento/Apache memory usage even without visitors (are we fooled by our hosting company?)

  - by MrDobalina

  I am no server guy and we have issues with our speed so I come here asking for advise. We have a VPS with 2 cores and 2gb of RAM at a Magento specialized hosting company. Over the course of the last weeks our site speed has gotten worse, even though our store is new, has less than 1000 SKUs and not even 100 visitos a day. At magespeedtest.com we only get 1.87 trans/sec @ 2.11 secs each with a mere 5 concurrent users. Our magento log files are clean, we have no huge database tables or anything like that. When we take a look at our server real time stats, we see that the memory usage jumped up from about 34% to 71% and now 82% in just a few days in idle, with no visitors on the site. Our hosting company said that we do not need to worry about that as it`s maybe related to mysql which creates buffers (which are maybe not even actually being used) and what is important is CPU and swap - stats are ok here. They also said that the low benchmark scores are caused by bad extensions or template modifications on our side. We are not sure if we can trust that statement as we only have 4 plugins installed (all from aheadworks and amasty which are known to be one of the best magento extension developers). Our template modifications are purely html and css, no modifications to the php code. Our pagespeed is ranked with 93/100 in firebug and Magento is properly configured, so the problem really just gets obvious when there are a handful of users on the site at the same time. Can anyone confirm our hosting`s statement about memory usage and where can I start looking for a solution?

  Read the article

• Server down at 23:26 every night

  - by miccet

  We are having a big problem with our sites stability the last couple of weeks and after endless hours of troubleshooting I don't get anywhere. So I turn to you dear community. Setup: 2 x VPS servers - Front end, 8 core, 8G RAM. - Database, 5 core, 3G RAM. Both running Ubuntu. Ruby on Rails EE with Passenger 3 and Rails 2.3.11. MySQL 5.1.67. The problem is that each night, at the exact same time (23:26) the SQL server suddenly shows a processlist full of COMMIT with an increasing Time. After 30-40 seconds (can go longer) a wave seems processed and the site responds for a few seconds before it repeats. During this hick up the database server load spikes while the front end is relaxing. I have looked at slow queries, but is not finding any locks or other unusual queries ran at this time. I have looked at iotop at the time of the halt and there is no activity from mysql. I also tried turning off query_cache and messed around with the mysql configuration file without much change. Any ideas?

  Read the article

• Softfail / Failure Notice on SMTP

  - by pascal1954

  Hey, i'm searching for an answer for about 24 hours now and I still can't find any really useful help... The problem appears as the following: I'm running a debian server with Plesk 9.5.3 and qmail. Since a few weeks I'm not able to send mails to some particular servers (like web.de, aol.com). Hence I get failure notices like "Sorry, I wasn't able to establish an SMTP connection." But when I try to send mails to gmail.com - it works! Gmail only reports a softfail in the mail header like so: Received: from h1600XXX.?none? (DOMAIN2.TLD [XX.XXX.XX.XX]) Received-SPF: softfail (google.com: best guess record for domain of transitioning [email protected] does not designate 85.XXX.XX.XX as permitted sender) client-ip=85.XXX.XX.XX This sounds like a dns problem for me, but I can't get an answer for that... What makes me wondering is: h1600XXX is correct, but it should look like h1600XXX.stratoserver.net, not ?none? DOMAIN2.TLD (first line) is different from DOMAIN1 (second line). Both are hosted on this machine, but is this correct? DOMAIN1 is the one I send this mail from. Hopefully someone could help me! If you need more specific information, let me know. Thanks in advance!!! Best regards

  Read the article

• Computers on network crashing

  - by Phil Cross

  We have recently upgraded our network to Windows 7 clients with Windows server 2008 servers. The upgrade was completed by the end of September and until now has been fine (apart from the minor bugs). Recently (within the last 2 weeks) we've notice all computers on the network (around 1000) start to slow down to the point their unusable. It starts at about 08:45 and finishes at 09:15. Because of this, we think something may be broadcasting across the network. This happens every day, between these times. I cant use my computer at all at the slowdown peak, and looking at task managers performance graphs, Physical memory is hovering around 35% and CPU usage is at 0-10% (idle) yet still crashing. I've looked on DHCPs server log and cant see anything which stands out. The only change we made prior to the slowdown was installing adobe CS6 on some computers, however the slowdown affects computers without CS6. We have 2 physical machines, each with around 5-7 virtual machines running on them with ample memory. Does anyone have any suggestions as to what we can do to narrow down whats causing the crashes? Any help, suggestions or advice would be appreciated.

  Read the article

• Cannot browse Visual SVN Repositories

  - by user1783560

  I went through Unable to browse repository after setting visual SVN Server and tried to implement the answer suggested but even the IP address is not solving my problem. I have 1) Turned off firewall 2) Set the directory C:\Program Files (x86)\VisualSVN Server security rights to "full control" for all groups including "Network service" group. 3) Set the directory D:\Repositories security rights to "full control" for most groups including "Network service" group. 4) Tried switching between secure and non-secure connection option in visual svn server manager. 5) Tried different with port numbers. Including 443 (with https) and 80 (http). Also tried giving random ports with/without https. Using computer name/ IP address in the url doesn't help. Windows network diagnostics - Troubleshooting report has following message for me. Security policy settings or firewall settings on this computer might be blocking the connection. = Detected Can someone guide me please? I have spent more than two weeks on this now without any solution. Thanks in advance! I appreciate your responses.

  Read the article

• Help with Backup Scheme for B.E 12.5

  - by Jemartin

  I'm in process of implementing a new backup scheme. I would say that I'm kind of new to it. So here my question. I'm currently using Backup Exec 12.5 on Windows Server 2008 w/Hyper-V, and IBM Adic Scalar 24. I currently backup our mail server, SQL DB, Board Server Linux Red Hat, Ftp, etc. To a Near-line which is local on our SAN I have the daily's go there as well as full. I would like to start weekly full to tape on a Saturday it takes about 2-3 days to complete the entire full to tape due to backing up from our Co-Lo as well. I have read up on the Father/son rotation but here's my issue with that I dont use tapes everyday only on the weekly full to tape will I be using them. So if there is 4 weeks in a month would I rotate in this order ( Month June WK1 =7tapes , June WK2=7 tapes, June WK3=7tapes June Wk4=7tapes with WK4 being the last tape for the month of June I would use that as a Month tape. For the month of July Wk1= June's WK1 tapes, July WK2= June's WK2 tapes July WK4 = Junes Wk4 tape for a month or would I use a set of new tapes for the last week in July. All tapes are being taking off site as well.

  Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >