Search Results

Search found 19966 results on 799 pages for 'wild thing'.

Page 85/799 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

• How to make an x.509 certificate from a PEM one?

  - by Ken

  I'm trying to test a script, locally, which involves uploading a file using a Java-based program to a FileZilla FTPES server. For the real thing, there is a real certificate on the FZ server, and the upload step (tested alone) seems to work fine. I've installed FileZilla Server on my dev box (so it'll test uploading from localhost to localhost). I don't have a real certificate for it, of course, so I used the "Generate new certificate..." button in FZ. It works fine from an interactive FTPES program (as long as I OK the unknown cert), but from my Java program it throws a javax.net.ssl.SSLHandshakeException ("unable to find valid certification path to requested target"). So how do I tell Java that this certificate is OK with me? (I know there's a way to change the Java program to accept any certificate, but I don't want to go down that route. I want to test it just as it will happen in production, and I don't want to ignore unknown certificates in production.) I found that Java has a program called "keytool" that seems to be for managing this sort of thing, but it complains that the certificate file that FZ generated is not an "x.509" file. A posting from the FZ side said it was "PEM encoded". I have "openssl" here, which looks like it's perfect for converting between certificate formats, but I think my understanding of certificate formats is wrong because I'm not seeing anything obvious. My knowledge of security certificates is a bit shaky, so if my title is stupidly wrong, please help by fixing that. :-)

  Read the article

• Ubuntu 9.10 RSA authentication: ssh fails, filezilla runs fine

  - by MariusPontmercy

  This is quite a mistery for me. I usually use passwordless RSA authentication to login into my remote *nix servers with ssh and sftp. Never had any problem until now. I cannot connect to an Ubuntu 9.10 machine: user@myclient$ ssh -i .ssh/Ganymede_key [email protected] [...] debug1: Host 'ganymede.server.com' is known and matches the RSA host key. debug1: Found key in /home/user/.ssh/known_hosts:14 debug2: bits set: 494/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: .ssh/Ganymede_key (0xb96a0ef8) debug2: key: .ssh/Ganymede_key ((nil)) debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Offering public key: .ssh/Ganymede_key debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Trying private key: .ssh/Ganymede_key debug1: read PEM private key done: type RSA debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password,keyboard-interactive debug2: we did not send a packet, disable method debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug2: we sent a keyboard-interactive packet, wait for reply debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Then it falls back to password authentication. If I disable password authentication on the remote machine my connection attempt just fails with a "Permission denied (publickey)." state. Same thing for sftp from command line. The "funny" thing is that the exact same RSA key works like a charm with a Filezilla sftp session instead: 12:08:00 Trace: Offered public key from "/home/user/.filezilla/keys/Ganymede_key" 12:08:00 Trace: Offer of public key accepted, trying to authenticate using it. 12:08:01 Trace: Access granted 12:08:01 Trace: Opened channel for session 12:08:01 Trace: Started a shell/command 12:08:01 Status: Connected to ganymede.server.com 12:08:02 Trace: CSftpControlSocket::ConnectParseResponse() 12:08:02 Trace: CSftpControlSocket::ResetOperation(0) 12:08:02 Trace: CControlSocket::ResetOperation(0) 12:08:02 Status: Retrieving directory listing... 12:08:02 Trace: CSftpControlSocket::SendNextCommand() 12:08:02 Trace: CSftpControlSocket::ChangeDirSend() 12:08:02 Command: pwd 12:08:02 Response: Current directory is: "/root" 12:08:02 Trace: CSftpControlSocket::ResetOperation(0) 12:08:02 Trace: CControlSocket::ResetOperation(0) 12:08:02 Trace: CSftpControlSocket::ParseSubcommandResult(0) 12:08:02 Trace: CSftpControlSocket::ListSubcommandResult() 12:08:02 Trace: CSftpControlSocket::ResetOperation(0) 12:08:02 Trace: CControlSocket::ResetOperation(0) 12:08:02 Status: Directory listing successful Any thoughts? M

  Read the article

• Random server lag, no CPU/mem/pagefile usage

  - by Kev

  We have a fairly new server running Windows 2003 SP2, and the past few days we've noticed random slowdowns. When I'm logged into the server over remote desktop while this is happening, or if I'm physically sitting at the server logged in, suddenly everything becomes extremely laggy. Any UI element I try to interact with takes upwards of ten seconds to react, and then responds very slowly. Then a minute later everything is quite snappy again. During this, I have Task Manager minimized to the tray, and there's no CPU usage. I open it up right after this happens, and there's very little CPU usage on the graph, and no memory or pagefile usage above normal. (Normal being 1.5 GB free in the case of memory.) This is what I see logged into the server, and then users start calling saying things are slow, timing out, and failing--anything to do with our server. No events in the Event Viewer around the times this happens. The context I'm working in (last thing I clicked, etc.) seems different every time--different programs active, different combinations of programs open. Never anything particularly stressful (like adding an event entry to a Cobian Backup configuration, or editing text in TextPad, which has been exceptionally stable in my extensive usage of it.) I would've thought it was just the server, but a family member's home PC (entirely separate) running WinXPSP3 had the same thing happen to it last night a few times. Is this some new behaviour introduced by the latest Windows Updates? Either way, where do I even start to look when nothing seems to be chewing up resources?

  Read the article

• Application Virtualization

  - by Peter Versnee

  I have been looking for a solution to virtualize my desktop application as a SaaS. After picking Citrix XenApp as the best solution for my case and trying for ever to get it to work (with some more experienced people) I can't help but to conclude that Citrix has too much problems for my case. Every time I fix one thing some other thing pops up. As I can't imagine Citrix XenApp is the only way to deliver my application to my clients, I'd like to ask you experienced guys if you think there is an other way to deliver it whilst meeting my requirements. I've got no money issues - time on the other hand... My requirements: My application must run on a windows server; The application should be virtualized with the application window only (no desktop); Content Redirection (my application is the only one virtualized, so PDF, DOC(X) etc. is on the users' system); Easy user management; SSO;* Cross platform (Windows, Linux, Mac OSX).* I truly hope I don't annoy you with another of the same question. I've tried to find the same question here and - obviously - didn't found it. *) these I can live without, however very much appreciated

  Read the article

• configure a Macbook Pro to use external monitor at boot (Debian Linux)

  - by Eric

  In the spirit of reuse, I've installed Debian (version 6.0.5 "squeeze") on my wife’s old Macbook Pro (circa 2009 or so), to repurpose it for various tasks. The catch is the display is flaky. It will last a random amount of time, between 2 minutes and 2 hours, before freezing and graying out. This is a known issue with that generation of MBP. Fortunately it’s no problem for me, as I plan to use it with an external monitor anyway. Which brings us to the problem: How do I configure this thing to output to the external display by default, and hopefully disable the built-in LCD? The ideal solution would be to modify a setting in the EFI (BIOS), but I’m not holding out much hope for that. Next best thing would be a kernel option I can pass to the NVIDIA driver. What won’t work is a solution that doesn’t give me a display until X starts. I need to have console access, especially given that the built-in LCD is dying, and any day now might give out completely. So far I haven’t been able to find anything online. lspci says I’ve got an NVIDIA GeForce 9400M Help is much appreciated! Eric PS if this question is better suited to the Unix & Linux area, pls advise and I will move it.

  Read the article

• Replacement for public folder workflow, I'm confused as to how sharepoint does it.

  - by RodH257

  For years Microsoft has been slowly phasing out public folders, perhaps exchange 2010 really is the LAST TIME they'll be shipped... I've heard sharepoint is the replacement, but I don't understand full, can someone give me an idea of how to replace this workflow? In our office, we have projects, they have a project number, ie 10353. Each job folder has a public folder, organized in a hierachy like Projects Year Folder Subfolders The main subfolder we use is for genera correspondence. When an email is received that relates to a project, it is dragged and dropped (or right click move to) a public folder. Adding public folder favourites for each user helps this. When an email is sent, we have a custom email form, which is the default email form, but with a project number field next to the subject line. When you enter the job number in there, it carbon copies our filing system in, which reads the job number and puts the email in the public folder for you. if you need to refer to emails, you go to public folder and find them there. This isn't the best with large jobs, but it works ok. Now, I have limited experience with sharepoint (well, WSS), we've used it to do some neat discussion boards/polls etc as an intranet site, but I haven't seen much of its integration with outlook. The great thing about our solution is how tightly it integrates with outlook which is exactly where the emails are. If you want to forward an old email, you go to public folder and forward it, simple. Any solution that replaces it should be at least as easy as this. Improvements we would like would be to have better searching of emails, better support in exchange (ie future version) and also, custom forms in outlook are being phased out (the VBA kind), so avoiding these would be good. Does sharepoint do this? or what solutions do this kind of thing?

  Read the article

• Puzzling TCP performance over 3G / UMTS

  - by lemonsqueeze

  I'm using 3G as my primary internet connection, and TCP over this thing is getting more puzzling every day. For example: Downloading from kernel.org is crazy fast: $wget http://www.kernel.org/pub/linux/kernel/v3.0/linux-3.6.8.tar.bz2 increases to ~500kB/s after a few secs ! Some servers are incredibly slow, for instance www.graphic-pc.com:Same thing, downloading a big file with wget it starts at ~30kB/s for a split second, then collapses to 5-10k or even worse. Web browsing is decent but somewhat unreliable. Randomly, a page will take really long to load or even fail to load, but a reload can succeed almost immediately. Now, by chance i started playing with OpenVPN over UDP on top of the 3G connection, and OMG suddenly everything's extremely fast !Same www.graphic-pc.com now shoots at 100-200kB/s ! What's going on here ??? How come it is so much better with the VPN than without ?? And why does graphic-pc.com crawl when kernel.org flies ?Something to do with my tcp stack (or the server), or some buggy router in between ?? Notes: Setup is laptop running Ubuntu Lucid and a Huawei 3G dongle (So direct pppd connection). I can reproduce this pretty much any time during the day and I'm not moving, so it's clearly not cell environment or internet congestion. (although kernel.org without VPN sometimes does worse in the evening, 60kB or so - but still 500kB with VPN !) For 2) wireshark shows retransmitted packets, dup ack's, even out of order sometimes. I've tried playing with different /proc/sys/net/ipv4 parameters (tcp_rmem, window_scaling, tcp_congestion...) doesn't seem to make a difference. Update: Tried under windows 7 (no VPN) with some interesting results: tcp settings : default tcp_optimizer kernel.org : 10 kB/s 20 kB/s graphic-pc.com: 8 kB/s 70 kB/s ! tcp_optimizer turned on ctcp among other things. Have to check what os graphic-pc.com is running, my bet is linux's tcp_westwood and ms ctcp don't mix well here...

  Read the article

• Imac g5 with no OS nor CD drive

  - by sinekonata

  What I want: Ubuntu on a g5 Imac. What I have: An empty PC (Intel g5 17" Imac) with broken CD drive. Its model is A1173. This PC with Ubuntu 12.04 and an old Vista partition. a usb flash drive. Problems: No CD means the only boot Drive I could use is USB. There are no BIOS on Macs so I can't set boot settings or even see if it detects my USB drive. When I start the machine and press ALT the first and only thing I see is an old corrupted winXP partition and not a single option or additional information. So assuming blindly that the Mac hardware/firmware works normally, I don't have any Mac OS to use any of the tools that I found on different tutorials for building a bootable .img drive for macs. I can't find much software on Linux/Windows to substitute to those tools, for example among others converting an .iso file (win/linux) to .img (mac I guess). Which makes me think that the scenario where someone like me has Mac hardware but no Mac OS is extremely rare. So other than finding someone that has a Mac I have no solution. So I ask what would you do? the only thing is it should not involve any money (I know mac soft is rarely free) which also excludes getting any MacOS unless I can use a free macos.img for VM or restore the original Mac for free. Thank you

  Read the article

• How to implement a virtual server running Ubuntu inside a fileserver in windows?

  - by user541445

  I work in a company that has some limitations regarding their budget. They need client/server aplication. I can code the aplication, I've made mini tests on primordial applications that work. The thing is that they only have fileservers, and the application they need must be concurrent compliant, so the database must be in their local network (Fileserver is the only choice). So far, I have explored almost any option available, starting with: Desktop databases. Access (We have a license)(But concurreny is just not effective, besides it's a windows software, yuck). Sqlite (Nice, but since the information they manage is a lot, I've performed some concurrency tests with INSERTs and doing SELECTS at the same time). It fails, somehow it just stops inserting. Open office Base (I dismember a base office only to see that it was a file mode HSQLDB). I've tried, not concurrent at all. Etc (You name the Open source Desktop Database manager, and yes, I've tried that one.) Server databases Call me a stubborn person, but reading some server databases documentation say that their databases will work in a file mode. I've tried a lot of products. Postgres, MySQL, FireBird, H2, Derby, Oracle Express, IBM DB2 Express, etc. So, I really need a hand here, I've been doing this install/delete/depression thing with a lot of databases for 3 weeks, until I got with a crazy idea and I just came here to express it. So, my question comes down to this: Installing a light virtual OS software like Virtual PC and then installing in there a Server OS like an Ubuntu server inside that virtual software will work? Will it work 24/7 or when I close the virtual pc software? Will this work in a fileserver? Any suggestion, answer, critic to the place I work, crazy new concurrent database that will work in fileserver will be most than welcome.

  Read the article

• Recommended Win2k8 Server software to fix my RAID-0 issue

  - by Jason Kealey

  I'm running an Asus P6T V2 Deluxe. It has six SATA ports and supports onboard RAID. I am using two of those ports for a RAID0 array of 1.5TB Seagate drives using the onboard RAID controller. One of them is giving me SMART warnings and I want to preemptively replace it. I pulled out two other 1.5TB drives from another computer and am ready to use one or both, if necessary. I can't run any SMART diagnostic software from within Windows because it only sees the hardware RAID-0 array, not each individual drive. The first thing I tried was a slow sector-by-sector copy using a free tool called EASEUS Disk Copy. Used the bootdisk, copied (took like 16 hours), unplugged the defective drive and plugged the new one in its place. The motherboard didn't recognize the new drive as being part of the known setup, so it did not want to boot. The second thing I tried was using other software (I forget the name) to copy the partition from within Windows. The first software failed because I had a server operating system. I found another software (I forget the name) which supported a server OS and did a partition copy onto the new drive. This seemed to work and the OS started to boot, but blue screened and started a reboot cycle. I'm assuming the software I was using was no good as it was trying to copy the boot disk while it was in use. I am looking for recommendations on what software to use to fix my problem without doing a re-install. Everything is backed up but my computer works fine and I'd like to avoid re-installation when possible. However, my system would be back up now if I had just started over on a second RAID array. :)

  Read the article

• OS X won't boot up unless I hold down option key

  - by Gazzer

  I have a strange issue on an early 2008 Mac Pro running OS 10.6: if I restart the computer it restarts normally if I shutdown and boot, it stops at the grey screen just before the boot process if I shutdown and boot but hold down the option key, I can select the boot disk and all is good. I've just cloned the disk, and the same thing happens. The disk is a SAMSUNG HD154UI The disk is partitioned (the second partition holds a clone of the Snow Leopard Install disk) One weird thing on the original disk was one of the partitions said 'EFI Boot' in a non-aliased font rather than the name of the disk when the disks are listed upon holding down option. Solution: it seems that there was a problem with the disk. Part of the difficulty in finding the solution was that you need to remove the disk from the computer completely. For example, a good disk in Bay 3, wouldn't boot up if the bad disk was in Bay 2. So for ages I thought the problem was hardware related in Bay 3. So if you think you have a dodgy disk remove it totally if you are testing the hardware with a 'clean' disk. Cleaning the PRAM helped to get the new disk to work too.

  Read the article

• VGA Cable gave me an Electric Shock when connecting a Projector to a Laptop

  - by Felipe Luarte

  Yesterday I was trying to connect a Viewsonic Projector to my Samsung RC420 laptop... I followed this steps: I Plugged the Projector to a power source, in parallel I did the same thing with the laptop. Then I turned on the laptop, but not the Projector (this one turns a bright light when is connected to a power source). I put the VGA Cable to the Projector (this one being still turned down) and then when I was getting close to the VGA port of the Laptop... BAM! A big spark appear between the port and the cable! Immediately the whole electricity of my floor went off. A part of the port in my laptop kind of... melted down. It seems to be where the spark started. The same thing happened to the part of the cable involved. Now I'm using the laptop, and it seems that there is no problem in it, I haven't connect anything to the VGA port yet. And the projector is still working to, well... it turns on, and I haven't connect anything yet too. The projector was connected to the power source by a homemade electric extension.

  Read the article

• Microsoft Excel not graphing

  - by SmartLemon

  Im not sure if this is a math question or a su question. The experiment was relating the period of one "bounce" when you hang a weight on a spring and let it bounce. I have this data here, one being mass and one being time. The time is an average of 5 trials, each one being and average of 20 bounces, to minimize human error. t 0.3049s 0.3982s 0.4838s 0.5572s 0.6219s 0.6804s 0.7362s 0.7811s 0.8328s 0.869s The mass is the mass that was used in each trial (they aren't going up in exact differences because each weight has a slight difference, nothing is perfect in the real world) m 50.59g 100.43g 150.25g 200.19g 250.89g 301.16g 351.28g 400.79g 450.43g 499.71g My problem is that I need to find the relationship between them, I know m = (k/4PI^2)*T^2 so I can work out k like that but we need to graph it. I can assume that the relationship is a sqrt relation, not sure on that one. But it appears to be the reverse of a square. Should it be 1/x^2 then? Either way my problem is still present, I have tried 1/x, 1/x^2, sqrt, x^2, none of them produce a straight line. The problem for SU is that when I go to graph the data on Excel I set the y axis data (which is the weights) and then when I go to set the x axis (which is the time) it just replaces the y axis with what I want to be the x axis, this is only happening when I have the sqrt of "m" as the y axis and I try to set the x axis as the time. The problem of math is that, am I even using the right thing? To get a straight line it would need to be x = y^1/2 right? I thought I was doing the right thing, it is what we were told to do. I'm just not getting anything that looks right.

  Read the article

• Ubuntu odd mouse and keyboard behavior when window gains inner focus

  - by Scott

  This morning on my Ubuntu 10.10 system when I open a window - for example, system-preferences-about me, if I click in to a field such as "work email", I can no longer close the window with the mouse! Clicking the X on the window will not work. Also, I loose the ability to click on anything else - clicking on the desktop, icons, menus, workspaces, etc. do not work. Even the effect when you hover over a folder on the desktop and that folder highlights - that stops until the window is closed. If I open this same screen but do not click in to a field, everything is fine - I can close the window with the X and everything else works fine. Same thing happens with several other windows I tried. Even calculator - I can open it, everything is fine until I click on a button in the calculator - then no ability to click on anything else. Have to Alt-F4 to close the window. The system is only about a week old from a fresh install (64 bit ubuntu - quad core amd machine). I uninstalled wine, turned off remote desktop/disabled in startup, also in startup disabled visual assistance, bluetooth, dropbox, klipper. Reboot, no difference. The only other thing non-standard I see in startup is nvidia. Using a logitec usb mouse, saitek usb keyboard. Was working fine yesterday. I can not think of anything I did / installed yesterday. I switched themse, then went to update manager and saw two x server / x org related updates and installed them, reboot and NOW IT IS FINE! However, then I re-enabled dropbox, klipper and remote desktop rebooted and the problem is back. Again I disabled and rebooted. Problem is still there!! So somehow I fixed it at least for a few minutes, but now it is back and I am out of ideas.

  Read the article

• Broken Vista. Can't open Windows settings.

  - by serena

  My neighbor has a Lenovo laptop with Windows Vista Home Basic. She's a noob and just uses the laptop for internet purposes. She said she had to close down Windows improperly (sometime ago, maybe 6 months) because of system freeze. She realized there's something wrong with her Windows when she tried to open Windows update settings. I took a look at the system and determined the following errors: When I click on Windows Updates, a bare white window opens for a sec. and closes immediately. When I try to open Computer Properties, the same thing happens. (Windows+Break doesn't work either.) When I try to open Bluetooth settings, the same thing happens. So Vista won't let me open any Windows settings, but installed programs work correctly (games, applications etc.). She has no Windows Vista discs since the laptop came with preinstalled genuine Vista. She also has no recovery discs. I don't think there is a system restore point for the time the system was stable. Now what can we do to solve this big problem?

  Read the article

• External-Harddisk drive couldn't run unless in safe mode

  - by zfm

  This is the strangest thing ever happened to me... I have an external harddisk drive (ext-HDD), bought around 2 years ago (don't know whether this is an important issue or not). Here, I have a video file (.avi) in my internal harddisk dive (HDD), it worked very well, then I copy it to my ext-HDD, but I couldn't run the file directly from my ext-HDD! I tried to copy it back to my HDD (from the ext-HDD), and now the copy couldn't be run on my HDD too. Remember that I copy the file, so the original one was still there. I tried to go to safe mode (forget to mention, I use Windows 7 Pro), and this is where the strange thing happened, the copied files (both in ext-HDD and HDD) can be run in this safe mode. So, my question is, what could actually be happened there? PS: My ext-HDD is Axioo, 250 GB, exFAT... Edited: Currently I used MacOSX, and the file in the harddisk still can't be run. I haven't tried safe mode for Mac (is there one?), but will try later (if there is)

  Read the article

• Is it a good Idea to switch to a SSD to use less battery?

  - by Walter Maier-Murdnelch

  I am thinking of buying a SSD for my laptop, mainly for the purpose of extended operating time when running on battery. At the moment I use a Hitachi HTS545032B9A300 (320GB) (Datasheet) as main drive and a Seagate Momentus 5400.3 120GB as secondary drive. I dualboot Windows and Linux but I don't need the windows partition any longer, a 120GB SDD would be more than sufficient space-wise. Speed is not an issue for me, I make heavy use of tmpfs (ramdrive) within Linux and transfers of bigger files are mainly through some network filesystem anyways, thus a cheaper SSD should do. For the purpose of comparison I chose the OCZ Vertex Plus 120GB. Power consumption always is a big promotional thing the industry uses to make me want to buy their SSDs, some sheet on the OCZ page provides an astonishing comparison of desktop HDDS and SSDs. The numbers I got comparing my laptop HDD and their SSD were not really astonishing any longer. Hitachi 320GB HDD: Startup (W, peak, max.) 4.5 Seek (W, avg.) 1.7 Read / Write (W, avg.) 1.4 Performance idle (W, avg.) 1.3 Active idle (W, avg.) 0.8 Low power idle (W, avg.) 0.5 Standby (W, avg.) 0.2 Sleep 0.1 OCZ 120GB SSD: 1.5W active 0.3W standby I see that there are differences, but actually they don't seem that high as I though they were. And compared to the power consuption of the rest of my system I wonder if it makes a difference at all. Have I just taken the wrong look at the whole thing or may I be better off to buy another battery for my laptop?

  Read the article

• Start Chrome by command line, but adding some arguments to make it login into your Google account automatically

  - by jim

  Is there a way to start Chrome calling it from the command line (using Linux), but providing it some argument to make it login into some Google account automatically? I'm looking for something like google-chrome -account foo -pass bar that I can easily put in a bash script later. A little background: I have a laptop connected to my TV, which is currently using just a mouse for user interaction. There's no google account logged in by default, and that's the way I want to keep it, so my kids can't come across videos and pictures in google and youtube that they are not supposed to see (e.g.: adult content, or anything marked as not appropriate for kids by the google's safe search filters). The bad thing about this is that there are some music videos in youtube that requires you to be logged in to see, usually those we (the adults) used to sing when playing karaoke... as the only input available is a mouse, I'm looking for a way to start with my google account without having to type the whole thing usin the on-screen keyboard. You may think "Why you can't use the keyboard, if the laptop is right there?". Well, it's in a kind of uncomfortable position - too high for me without a chair or something, as it's right above the furniture in where the TV is located. Is there a way to make this scriptable? If not, do you know any other workaround? Note: using the remember me after logging off or alike options are discarded, as the safe-search chrome version must be always the default version to run.

  Read the article

• How to kill ostensibly immortal process?

  - by DeeDee

  I had some huge file transfers operating on an NFS mount. The server on which the mount point resided was carelessly rebooted, and now the server from which these large transfers were initiated seems to be bogged down by them. If I run top, I see the following: The first thing I tried was to run kill with each the -1 -2 -9 and -15 flags, and each of the process ids shown above in turn. This allowed me to proceed, but didn't kill the processes. The next thing I attempted was to reboot the server, but neither reboot nor shutdown -r now worked. When I ran shutdown -r now the standard broadcast message was sent out, but the sever did not reboot. I confirmed this by looking at the server uptime, which was 25 days. So now I'm a little stuck. I'm running these commands as root. EDIT: Here's another interesting tidbit: In top, I don't see that any other processes are using more than a fraction of a percent of memory or more than 5% of CPU. EDIT 2: output of /var/log/messages

  Read the article

• CPU not working on a specific motherboard

  - by Shaman

  I'm making a computer for someone and I met a weird problem. The CPU that I have doesn't work on this motherboard. The CPU is an Intel Pentium D 925 and the motherboard is an ECS G41T-M6, which in theory should work together. The only thing reused is the power source(400W). When I start the computer, the fans start, and that's it. The BIOS doesn't boot. I tried my own power source (600W Corsair) and nothing. Removed the RAM, no warning. In desperation I tried the last thing, swaped my own CPU with this one (Core2Duo E7200). Lo and behold, it worked. Both. The Core2Duo worked on the ECS with the old power source and the RAM that I used in the first place, and the Pentium D worked on my Gigabyte G31M-ES2L. What I discovered was that the Pentium D didn't receive power on the ECS, because I tried running it without the cooler and it remained at room temperature. On a side note, I also removed the HDDs just in case. So, in conclusion, any ideas? I can't return it, and I can still use it to upgrade another PC, but I would really prefer not to buy another CPU if possible.

  Read the article

• Data loss by randomly unplugging the computer during runtime

  - by Kan

  I'm from Austria and we and the Germans have some sort of bad science-show which runs every day. What I call it would rougly translate to "half-knowledge" if you want so. By the way: It is called "Galileo". So they thought they'd make a computer myth busters video right now, and I couldn't believe what I saw and heard... The strangest thing to me was that they asked: "Does unplugging the computer damage your data?" Then they started up some machine with Vista on it, started copying some files and randomly unplugged the PC cable, the whole thing around 50 times. After their computer continued to start up normally, they just said "nothing can happen, your data or computer can't be damaged". They of course excluded unsaved data in running programs like text editors from this. I asked myself: What the hell are their "computer experts" saying? You can't tell by unplugging the cable 50 times if that can damage your computer. Can unplugging the cable during runtime cause data loss (as said by the moderator of the show)? (I destroyed my windows registry once during a reset)

  Read the article

• Firefox won't start

  - by Daniel R Hicks

  OK, I've got this problem again, only this time the problem only seems to affect Firefox and Thunderbird. Rebooted several times. Tried resetting to the last restore point, but that didn't work. Tried setting a new Firefox profile, and that didn't work either. The symptom is that you click on the Firefox or Thunderbird icon, the process appears in the Process Explorer list, but the window never opens. Curiously, if Firefox has been "started" this way, Internet Explorer hangs starting until I kill the Firefox process. Any ideas? I suppose the next thing to try is uninstalling and reinstalling Firefox/Thunderbird, but this whole thing is getting old. The box is a Sony Vaio running Windows Vista. It was completely restored from scratch less than two weeks ago, after the last fiasco. (I'm suspecting that my aborted install of Acronis True Image may have mucked things up this time.) Sigh! Another symptom: It occurred to me to try printing something, but if I open "Printers" it just sits there "searching". So something is rotten in the bowels of Windows. Minor update: It occurred to me to kill Internet Explorer (where I'd attempted printing). Then Printers comes up fairly quickly -- with no printers defined. Clicking "Add a printer" does nothing. Update: Well, following this suggestion to stop and restart the print spooler brought the printers back. And, wonder of wonders, Firefox now starts OK. Stopping and restarting the print spooler!!

  Read the article

• Finding Webserver Vulnerability

  - by Brent

  We operate a webserver farm hosting around 300 websites. Yesterday morning a script placed .htaccess files owned by www-data (the apache user) in every directory under the document_root of most (but not all) sites. The content of the .htaccess file was this: RewriteEngine On RewriteCond %{HTTP_REFERER} ^http:// RewriteCond %{HTTP_REFERER} !%{HTTP_HOST} RewriteRule . http://84f6a4eef61784b33e4acbd32c8fdd72.com/%{REMOTE_ADDR} Googling for that url (which is the md5 hash of "antivirus") I discovered that this same thing happened all over the internet, and am looking for somebody who has already dealt with this, and determined where the vulnerability is. I have searched most of our logs, but haven't found anything conclusive yet. Are there others who experienced the same thing that have gotten further than I have in pinpointing the hole? So far we have determined: the changes were made as www-data, so apache or it's plugins are likely the culprit all the changes were made within 15 minutes of each other, so it was probably automated since our websites have widely varying domain names, I think a single vulnerability on one site was responsible (rather than a common vulnerability on every site) if an .htaccess file already existed and was writeable by www-data, then the script was kind, and simply appended the above lines to the end of the file (making it easy to reverse) Any more hints would be appreciated.

  Read the article

• Terminal is not letting me make commands unless I hit enter a bunch of times

  - by ninja08

  Whenever I open terminal it normally allows me to immediately begin making commands. Only earlier today I did the setup for github here https://help.github.com/articles/set-up-git And then all of a sudden the thing where I give terminal commands won't allow me to give it commands unless I hit enter a few times. This is what it looks like: Last login: Fri Nov 9 11:43:28 on ttys001 mysql.save: Permission denied mysql.save: Permission denied /Users/Nick/.zshrc:32: command not found:  . ~ git: ? ~ git: ? ~ git: ? See the big space? That's because it simply will never show the ~ git: thing unless I hit enter 3-4 times. Also, it never used to say ~ git: before I did the git setup. I'm not sure what I changed. I've checked the zshrc file and commented everything out to find the line causing the problem. I've done that and it turns out it was the source $ZSH/oh-my-zsh.sh Within the oh-my-zsh.sh file I've commented out each block of code for the file starting at the top and I've found that this block is causing it: # Load the theme if [ "$ZSH_THEME" = "random" ] then themes=($ZSH/themes/*zsh-theme) N=${#themes[@]} ((N=(RANDOM%N)+1)) RANDOM_THEME=${themes[$N]} source "$RANDOM_THEME" echo "[oh-my-zsh] Random theme '$RANDOM_THEME' loaded..." else if [ ! "$ZSH_THEME" = "" ] then if [ -f "$ZSH_CUSTOM/$ZSH_THEME.zsh-theme" ] then source "$ZSH_CUSTOM/$ZSH_THEME.zsh-theme" else source "$ZSH/themes/$ZSH_THEME.zsh-theme" fi fi fi

  Read the article

• Apps won't start after vanilla reboot

  - by Daniel R Hicks

  I had Adobe and Norton nagging me to reboot, so I did that -- clicked Reboot from the Start button. Everything seemed pretty normal as it shut down and came back up, but once up a bunch of apps won't start. The first one I noticed was Firefox. It would flash the disk light normally, but never appear on the screen. Then I tried to bring up an OpenOffice Calc window and same thing. I tried to bring up MS Word, and the splash screen appeared, but never the main screen, and the splash screen just sat there, with a swirly over it. But I tried Solitaire, Notepad++, Paint, and several others, and they popped up just fine. And I'm typing this from IE 8, which, if anything, came up faster than usual. When I try to open up "Network and Sharing Center" the window appears, but nothing appears in it, and eventually it's tagged "not responding". When I kill that window I get (after a delay) "Windows Explorer is not responding", and when I say "OK" the screen resets. I tried rebooting again, and no joy -- same as before. Have done nothing particularly strange on this box, and it's not generally at significant risk for malware. I haven't installed anything new other than the afore-mentioned updates. One other thing: Several minutes after rebooting I get the message "Error: Unable to start Bluetooth Stack Service." The Bluetooth radio is turned on, and I rarely have anything Bluetooth attached, and I don't recall that I've ever seen this message before. Added: Looking at Event Viewer, I'm getting a lot of "The description for Event ID 1 from source xxx cannot be found." Is there any significance to this? Added: I'm looking at restoring from backup, but the procedure is, at best, unclear. Is it sufficient to restore from "Backup and Restore Center", or must I restore from the restore DVD first?

  Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >