Search Results

Search found 2346 results on 94 pages for 'dedicated'.

Page 86/94 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

• Recommended ASP.NET Shared Hosting

  - by coffeeaddict

  Ok, I have to admit I'm getting fed up with www.discountasp.net's pricing model and this annoyance has built up over the past 8 years or so. I've been with them for years and absolutely love them on the technical side, however it's getting ridiculously expensive for so little that you get. I mean here's my scenario: 1) I am running 2 SQL Server databases which costs me $10/ea per month so that's $20/month for 2 and I only get 500 mb disk space which is horrible 2) I am paying $10/mo just for the hosting itself which I only get 1 gig of disk space! I mean common! 3) I am simply running 2 small apps (Screwturn Wiki & Subtext Blog)...so I don't really care if it's up 99% or not, it's not worth paying a total of $300 just to keep these 2 apps running over discountasp.net Anyone else feel the same? Yes, I know they have great support, probably have great servers running behind this but in the end I really don't care as long as my site is up 95% or better. Yes, the hosting toolset rocks. But you know I bet you I can find a similar set somewhere else. I like how I can totally control IIS 7 at discountasp and I can control my own app pool etc. That's very powerful and essential. But anyone have any good alternatives to discountasp that gives me close to the same at a much more reasonable cost point? I mean http://www.m6.net/prices.aspx gives you 10 SQL Databases for $7 and 200 gigs disk space! I don't know about their tools or support but just looking at those numbers and some other hosts I've seen, I feel that discountasp.net is way out of line. They don't even offer any purchasing discounts such as it would be nice if my 2nd SQL Server is only $5/month not $10...stuff like this, to make it much more realistic and fair. Opinions (people who do have discountasp.net, people who have left them, or people who have another host they like)??? But geez $300 just to host a couple DBs and lightweight open source apps? Not worth the price they are charging. I'm almost at a price point that enables me to get a decent dedicated server! I really don't care about beta support. Not a big deal to me.

  Read the article

• Why does std::map operator[] create an object if the key doesn't exist?

  - by n1ck

  Hi, I'm pretty sure I already saw this question somewhere (comp.lang.c++? Google doesn't seem to find it there either) but a quick search here doesn't seem to find it so here it is: Why does the std::map operator[] create an object if the key doesn't exist? I don't know but for me this seems counter-intuitive if you compare to most other operator[] (like std::vector) where if you use it you must be sure that the index exists. I'm wondering what's the rationale for implementing this behavior in std::map. Like I said wouldn't it be more intuitive to act more like an index in a vector and crash (well undefined behavior I guess) when accessed with an invalid key? Refining my question after seeing the answers: Ok so far I got a lot of answers saying basically it's cheap so why not or things similar. I totally agree with that but why not use a dedicated function for that (I think one of the comment said that in java there is no operator[] and the function is called put)? My point is why doesn't map operator[] work like a vector? If I use operator[] on an out of range index on a vector I wouldn't like it to insert an element even if it was cheap because that probably mean an error in my code. My point is why isn't it the same thing with map. I mean, for me, using operator[] on a map would mean: i know this key already exist (for whatever reason, i just inserted it, I have redundancy somewhere, whatever). I think it would be more intuitive that way. That said what are the advantage of doing the current behavior with operator[] (and only for that, I agree that a function with the current behavior should be there, just not operator[])? Maybe it give clearer code that way? I don't know. Another answer was that it already existed that way so why not keep it but then, probably when they (the ones before stl) choose to implement it that way they found it provided an advantage or something? So my question is basically: why choose to implement it that way, meaning a somewhat lack of consistency with other operator[]. What benefit do it give? Thanks

  Read the article

• Where do you put your unit test?

  - by soulmerge

  I have found several conventions to housekeeping unit tests in a project and I'm not sure which approach would be suitable for our next PHP project. I am trying to find the best convention to encourage easy development and accessibility of the tests when reviewing the source code. I would be very interested in your experience/opinion regarding each: One folder for productive code, another for unit tests: This separates unit tests from the logic files of the project. This separation of concerns is as much a nuisance as it is an advantage: Someone looking into the source code of the project will - so I suppose - either browse the implementation or the unit tests (or more commonly: the implementation only). The advantage of unit tests being another viewpoint to your classes is lost - those two viewpoints are just too far apart IMO. Annotated test methods: Any modern unit testing framework I know allows developers to create dedicated test methods, annotating them (@test) and embedding them in the project code. The big drawback I see here is that the project files get cluttered. Even if these methods are separated using a comment header (like UNIT TESTS below this line) it just bloats the class unnecessarily. Test files within the same folders as the implementation files: Our file naming convention dictates that PHP files containing classes (one class per file) should end with .class.php. I could imagine that putting unit tests regarding a class file into another one ending on .test.php would render the tests much more present to other developers without tainting the class. Although it bloats the project folders, instead of the implementation files, this is my favorite so far, but I have my doubts: I would think others have come up with this already, and discarded this option for some reason (i.e. I have not seen a java project with the files Foo.java and FooTest.java within the same folder.) Maybe it's because java developers make heavier use of IDEs that allow them easier access to the tests, whereas in PHP no big editors have emerged (like eclipse for java) - many devs I know use vim/emacs or similar editors with little support for PHP development per se. What is your experience with any of these unit test placements? Do you have another convention I haven't listed here? Or am I just overrating unit test accessibility to reviewers?

  Read the article

• organizing external libraries and include files

  - by stijn

  Over the years my projects use more and more external libraries, and the way I did it starts feeling more and more awkward (although, that has to be said, it does work flawlessly). I use VS on Windows, CMake on others, and CodeComposer for targetting DSPs on Windows. Except for the DSPs, both 32bit and 64bit platforms are used. Here's a sample of what I am doing now; note that as shown, the different external libraries themselves are not always organized in the same way. Some have different lib/include/src folders, others have a single src folder. Some came ready-to-use with static and/or shared libraries, others were built /path/to/projects /projectA /projectB /path/to/apis /apiA /src /include /lib /apiB /include /i386/lib /amd64/lib /path/to/otherapis /apiC /src /path/to/sharedlibs /apiA_x86.lib -->some libs were built in all possible configurations /apiA_x86d.lib /apiA_x64.lib /apiA_x64d.lib /apiA_static_x86.lib /apiB.lib -->other libs have just one import library /path/to/dlls -->most of this directory also gets distributed to clients /apiA_x86.dll and it's in the PATH /apiB.dll Each time I add an external libary, I roughly use this process: build it, if needed, for different configurations (release/debug/platform) copy it's static and/or import libraries to 'sharedlibs' copy it's shared libraries to 'dlls' add an environment variable, eg 'API_A_DIR' that points to the root for ApiA, like '/path/to/apis/apiA' create a VS property sheet and a CMake file to state include path and eventually the library name, like include = '$(API_A_DIR)/Include' and lib = apiA.lib add the propertysheet/cmake file to the project needing the library It's especially step 4 and 5 that are bothering me. I am pretty sure I am not the only one facing this problem, and would like see how others deal with this. I was thinking to get rid of the environment variables per library, and use just one 'API_INCLUDE_DIR' and populating it with the include files in an organized way: /path/to/api/include /apiA /apiB /apiC This way I do not need the include path in the propertysheets nor the environment variables. For libs that are only used on windows I even don't need a propertysheet at all as I can use #pragmas to instruct the linker what library to link to. Also in the code it will be more clear what gets included, and no need for wrappers to include files having the same name but are from different libraries: #include <apiA/header.h> #include <apiB/header.h> #include <apiC_version1/header.h> The withdrawal is off course that I have to copy include files, and possibly** introduce duplicates on the filesystem, but that looks like a minor price to pay, doesn't it? ** actually once libraries are built, the only thing I need from them is the include files and thie libs. Since each of those would have a dedicated directory, the original source tree is not needed anymore so can be deleted..

  Read the article

• How to display image from server (newest-oldest) to a new php page?

  - by Jben Kaye

  i have a form that create images and save it on a folder in the server. What i need to do is to display ALL created images to another page, the newest on the top and so that the oldest is at the bottom. i have a form called formdisplay.php but it's just displaying a broken image and not newest to oldest. hope you can help me with this. really need to get this working. thanks in advance for your help. i have read the posts but none of those worked for me. Pull dedicated images from folder - show image + filename (strip part of filename + file-extension) How can I display latest uploaded image first? (PHP+CSS) getting images from the server and display them Displaying images from folder in php display image from server embedding php in html formcreatesave.php imagecopymerge($im, $img2, 10, 350, 0, 0, imagesx($img2), imagesy($img2), 100); $date_created = date("YmdHis");//get date created $img_name = "-img_entry.jpg"; //the file name of the generated image $img_newname = $date_created . $img_name; //datecreated+name $img_dir =dirname($_SERVER['SCRIPT_FILENAME']) ."/". $img_newname; //the location to save imagejpeg($im, $img_dir , 80); //function to save the image with the name and quality imagedestroy($im); formdisplay.php $dir = '/home3/birdieon/public_html/Amadeus/uploader/uploader'; $base_url = 'http://birdieonawire.com/Amadeus/uploader/uploader/20131027024705-img_entry.jpg'; $newest_mtime = 0; $show_file = 'BROKEN'; if ($handle = opendir($dir)) { while (false !== ($file = readdir($handle))) { if (($file != '.') && ($file != '..')) { $mtime = filemtime("$dir/$file"); if ($mtime > $newest_mtime) { $newest_mtime = $mtime; $show_file = "$base_url/$file"; } } } } print '<img src="' .$show_file. '" alt="Image Title Here">'; please feel free to edit my code. thanks :)

  Read the article

• organizing unit test

  - by soulmerge

  I have found several conventions to housekeeping unit tests in a project and I'm not sure which approach would be suitable for our next PHP project. I am trying to find the best convention to encourage easy development and accessibility of the tests when reviewing the source code. I would be very interested in your experience/opinion regarding each: One folder for productive code, another for unit tests: This separates unit tests from the logic files of the project. This separation of concerns is as much a nuisance as it is an advantage: Someone looking into the source code of the project will - so I suppose - either browse the implementation or the unit tests (or more commonly: the implementation only). The advantage of unit tests being another viewpoint to your classes is lost - those two viewpoints are just too far apart IMO. Annotated test methods: Any modern unit testing framework I know allows developers to create dedicated test methods, annotating them (@test) and embedding them in the project code. The big drawback I see here is that the project files get cluttered. Even if these methods are separated using a comment header (like UNIT TESTS below this line) it just bloats the class unnecessarily. Test files within the same folders as the implementation files: Our file naming convention dictates that PHP files containing classes (one class per file) should end with .class.php. I could imagine that putting unit tests regarding a class file into another one ending on .test.php would render the tests much more present to other developers without tainting the class. Although it bloats the project folders, instead of the implementation files, this is my favorite so far, but I have my doubts: I would think others have come up with this already, and discarded this option for some reason (i.e. I have not seen a java project with the files Foo.java and FooTest.java within the same folder.) Maybe it's because java developers make heavier use of IDEs that allow them easier access to the tests, whereas in PHP no big editors have emerged (like eclipse for java) - many devs I know use vim/emacs or similar editors with little support for PHP development per se. What is your experience with any of these unit test placements? Do you have another convention I haven't listed here? Or am I just overrating unit test accessibility to reviewing developers?

  Read the article

• php imap save massage to sent folder after sending

  - by user1108279

  I am stucked with this for two days. I am trying to use imap_append from PHP but no luck so far. I was able to to implement this code for single attachment but multiple attachments not working. <?php $authhost="{000.000.000.000:993/validate-cert/ssl}Sent"; $user="sadasd"; $pass="sadasd"; if ($mbox=imap_open( $authhost, $user, $pass)) { $dmy=date("d-M-Y H:i:s"); $filename="filename.pdf"; $attachment = chunk_split(base64_encode($filestring)); $boundary = "------=".md5(uniqid(rand())); $msg = ("From: Somebody\r\n" . "To: [email protected]\r\n" . "Date: $dmy\r\n" . "Subject: This is the subject\r\n" . "MIME-Version: 1.0\r\n" . "Content-Type: multipart/mixed; boundary=\"$boundary\"\r\n" . "\r\n\r\n" . "--$boundary\r\n" . "Content-Type: text/html;\r\n\tcharset=\"ISO-8859-1\"\r\n" . "Content-Transfer-Encoding: 8bit \r\n" . "\r\n\r\n" . "Hello this is a test\r\n" . "\r\n\r\n" . "--$boundary\r\n" . "Content-Transfer-Encoding: base64\r\n" . "Content-Disposition: attachment; filename=\"$filename\"\r\n" . "\r\n" . $attachment . "\r\n" . "\r\n\r\n\r\n" . "--$boundary--\r\n\r\n"); imap_append($mbox,$authhost,$msg); imap_close($mbox); } else { echo "<h1>FAIL!</h1>\n"; } ?> Now that raw code above is working but I am unable to add multiple attachments. In some cases I got message body base64 decoded and in message body lot of strange letters. Something like R0lGODlhkAEfAOYAAPSeZPONtdSIu+u2vv/La+5Rj8AhYPvWhOjtkfvi7MRImcjYse5DM6O+dOnl ..... I search all the web i still got no luck. Since I have dedicated server I also tried to implement some procmail+ postfix examples but also no luck. Can someone help?

  Read the article

• IPhone iOs 5, need help getting my tab bar at the top to work

  - by Patrick

  I wanted to have the tab bar at the top. So i created a new project in XCode. Added a view and then inside that view i added (scrollbar, text and another view). See picture. What i wanted was to have my tab bar at the top. Then in the middle would be the contents from the tab bar and below it a small copyright text. See picture. No idea how to make this correctly. I have tried to create the UITabBarController on the fly and then assign it into the view at the top. (Top white space on the picture dedicated for the tab bar). Here is my code to init the MainWindow. MainWindow.h #import <UIKit/UIKit.h> @class Intro; @interface MainWindow : UIViewController @property (strong, nonatomic) IBOutlet UIScrollView *mainContentFrame; @property (strong, nonatomic) IBOutlet UIView *mainTabBarView; @property (strong, nonatomic) UITabBarController *mainTabBar; @property (nonatomic, strong) Intro *intro; // Trying to get this tab to show in the tab bar @end MainWindow.m #import "MainWindow.h" #import "Intro.h" @interface MainWindow () @end @implementation MainWindow @synthesize mainContentFrame = _mainContentFrame; @synthesize mainTabBarView = _mainTabBarView; @synthesize mainTabBar = _mainTabBar; @synthesize intro = _intro; - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]; if (self) { // Custom initialization } return self; } - (void)viewDidLoad { _intro = [[Intro alloc] init]; NSArray *allViews = [[NSArray alloc] initWithObjects:_intro, nil]; [super viewDidLoad]; // Do any additional setup after loading the view. _mainTabBar = [[UITabBarController alloc] init]; [_mainTabBar setViewControllers:allViews]; [_mainTabBarView.window addSubview:_mainTabBar.tabBarController.view]; } - (void)viewDidUnload { [self setMainTabBar:nil]; [self setMainContentFrame:nil]; [self setMainContentFrame:nil]; [super viewDidUnload]; // Release any retained subviews of the main view. } - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { return (interfaceOrientation == UIInterfaceOrientationPortrait); } @end What am i missing to get this to work? Wanted the content to end up in the scrollview so that all tabs are scrollable.

  Read the article

• WPF: Can't get to original source from ExecutedRoutedEventArgs

  - by Ikhail

  I have a problem getting to the original source of a command using ExecutedRoutedEventArgs. I'm creating a simple splitbutton, in which a menu will appear below a dedicated button, as another button is pressed. When I click a menuitem in the appearing menu a command is fired. This command is registered on the splitbutton. And the idea is to get to the menuitem beeing clicked, by using the ExecutedRoutedEventsArgs. Ok, now the problem. If I choose to have the popup menu shown by default (IsOpen="True") and I click one of the menuitems I can get to the originalsource (thus the menuitem) from the ExecutedRoutedEventArgs - no problem. However, if I first click the button to show the menu and THEN click on a menuitem, the originalsource of the command will be the button instead of the MenuItem! Here's the controltemplate for the splitbutton: <ControlTemplate TargetType="{x:Type usc:SplitButton}"> <StackPanel Orientation="Horizontal"> <Button Name="mybutton"> <StackPanel> <Popup usc:SplitButton.IsPopup="True" IsOpen="True" Name="myPopup" PlacementTarget="{Binding ElementName=mybutton}" StaysOpen="False" Placement="Bottom"> <Border BorderBrush="Beige" BorderThickness="1"> <Menu Width="120"> <MenuItem Header="item1" Command="usc:SplitButton.MenuItemClickCommand" /> <MenuItem Header="item2" /> <MenuItem Header="item3" /> </Menu> </Border> </Popup> <TextBlock Text="MySplitbutton" /> </StackPanel> </Button> <Button Content="OK" Command="usc:SplitButton.ShowMenuCommand" /> </StackPanel> </ControlTemplate> The OK button fires a ShowMenuCommand on the SplitButton, which sets the IsOpen property on the Popup to True. Any ideas why the OK button (after having activated the menu) is the OriginalSource when a menuitem is clicked? Thanks.

  Read the article

• AJAX Div Retrieval every 60 seconds

  - by Sam

  Hello everyone! What I would like to do is retrieve the contents of a PHP file and insert it into a div every 60 seconds, basically refreshing the dynamic div. I've come up with the following code so far, however it doesn't seem to be working. The code is just like this, nothing extra, apart from the MYSQL login. PHP to grab: <?php $time = date("m/d/Y h:i:s a", time()); mysql_query("UPDATE djs SET requesttime='{$time}' WHERE username='{$djs['username']}'") or die(mysql_error()); $request_db = mysql_query("SELECT * FROM requests WHERE haveplayed='0'") or die(mysql_error()); echo "<table style=\"border:1px solid;width:99%;margin-left:auto;margin-right:auto;\" border=\"1\">"; echo "<tr><th>Title</th><th>Artist</th><th>Dedicated To...</th></tr>"; while($request = mysql_fetch_array( $request_db )) { echo "<tr><td style=\"width:33%;padding:1px;\">"; echo $request['SongName']; echo "</td><td style=\"width:33%;\">"; echo $request['Artist']; echo "</td><td style=\"width:33%;\">"; echo $request['DedicatedTo']; echo "</td></tr>"; } echo "</table>"; ?> The original PHP code is just the same, enclosed in a div with an id attribute of 'ajax_table'. The JavaScript is: // JavaScript Document var xmlHttp_moniter function moniter() { xmlHttp_moniter = GetXmlHttpObject_parcel() if(xmlHttp_moniter == null) { alert("browser does not support HTTP Request") return } var url="ajax_table.php?random=" + Math.random() xmlHttp_moniter.onreadystatechange = stateChanged xmlHttp_moniter.open("GET",url,true) xmlHttp_moniter.send(null) } function stateChanged() { if(xmlHttp_moniter.readyState==4 || xmlHttp_moniter.readyState == "complete") { document.getElementById("ajax_table").innerHTML = xmlHttp_moniter.responseText setTimeout('ajax_table()',60000); } } function GetXmlHttpObject_parcel() { var xmlHttp_moniter=null; try { xmlHttp_moniter=new XMLHttpRequest(); } catch (e) { //Internet Explorer try { xmlHttp_moniter=new ActiveXObject("Msxml2.XMLHTTP"); } catch (e) { xmlHttp_moniter=new ActiveXObject("Microsoft.XMLHTTP"); } } return xmlHttp_moniter; } and that is on the page that is requesting the other php page.

  Read the article

• how to install ffmpeg in cpanel

  - by Ajay Chthri

  i'm using dedicated server(linux) so i need to install ffmpeg in cpanel so here ffmpeg i found in Main Software Install a Perl Module but i writing script in php so how can i install ffmpeg phpperl when i'am trying to install ffmpeg in perl module i get this response Checking C compiler....C compiler (/usr/bin/cc) OK (cached Tue Jan 17 19:16:31 2012)....Done CPAN fallback is disabled since /var/cpanel/conserve_memory exists, and cpanm is available. Method: Using Perl Expect, Installer: cpanm You have make /usr/bin/make Falling back to HTTP::Tiny 0.009 You have /bin/tar: tar (GNU tar) 1.15.1 You have /usr/bin/unzip You have Cpanel::HttpRequest 2.1 Testing connection speed...(using fast method)...Done Ping:2 (ticks) Testing connection speed to cpan.knowledgematters.net using pureperl...(28800.00 bytes/s)...Done Ping:2 (ticks) Testing connection speed to cpan.develooper.com using pureperl...(22233.33 bytes/s)...Done Ping:2 (ticks) Testing connection speed to cpan.schatt.com using pureperl...(32750.00 bytes/s)...Done Ping:3 (ticks) Testing connection speed to cpan.mirror.facebook.net using pureperl...(14050.00 bytes/s)...Done Ping:2 (ticks) Testing connection speed to cpan.mirrors.hoobly.com using pureperl...(5150.00 bytes/s)...Done Five usable mirrors located Ping:0 (ticks) Testing connection speed to 208.109.109.239 using pureperl...(28950.00 bytes/s)...Done Ping:2 (ticks) Testing connection speed to 208.82.118.100 using pureperl...(19300.00 bytes/s)...Done Ping:1 (ticks) Testing connection speed to 69.50.192.73 using pureperl...(19300.00 bytes/s)...Done Three usable fallback mirrors located Mirror Check passed for cpan.schatt.com (/index.html) Searching on cpanmetadb ... Fetching http://cpanmetadb.cpanel.net/v1.0/package/Video::FFmpeg?cpanel_version=11.30.5.6&cpanel_tier=release (connected:0).......(request attempt 1/12)...Using dns cache file /root/.HttpRequest/cpanmetadb.cpanel.net......searching for mirrors (mirror search attempt 1/3)......5 usable mirrors located. (less then expected)......mirror search success......connecting to 208.74.123.82...@208.74.123.82......connected......receiving...100%......request success......Done Searching Video::FFmpeg on cpanmetadb (http://cpanmetadb.cpanel.net/v1.0/package/Video::FFmpeg?cpanel_version=11.30.5.6&cpanel_tier=release) ... Fetching http://cpanmetadb.cpanel.net/v1.0/package/Video::FFmpeg?cpanel_version=11.30.5.6&cpanel_tier=release (connected:1).......(request attempt 1/12)[email protected]%......request success......Done Source: fastest CPAN mirror ... --> Working on Video::FFmpeg Fetching http://cpan.schatt.com//authors/id/R/RA/RANDOMMAN/Video-FFmpeg-0.47.tar.gz ... Fetching http://cpan.schatt.com/authors/id/R/RA/RANDOMMAN/Video-FFmpeg-0.47.tar.gz (connected:1).......(request attempt 1/12)...Resolving cpan.schatt.com...(resolve attempt 1/65)......connecting to 66.249.128.125...@66.249.128.125......connected......receiving...25%...50%...75%...100%......request success......Done OK Unpacking Video-FFmpeg-0.47.tar.gz Video-FFmpeg-0.47/ Video-FFmpeg-0.47/Changes Video-FFmpeg-0.47/FFmpeg.xs Video-FFmpeg-0.47/MANIFEST Video-FFmpeg-0.47/META.yml Video-FFmpeg-0.47/Makefile.PL Video-FFmpeg-0.47/README Video-FFmpeg-0.47/lib/ Video-FFmpeg-0.47/lib/Video/ Video-FFmpeg-0.47/lib/Video/FFmpeg/ Video-FFmpeg-0.47/lib/Video/FFmpeg/AVFormat.pm Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream/ Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream/Audio.pm Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream/Subtitle.pm Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream/Video.pm Video-FFmpeg-0.47/lib/Video/FFmpeg/AVStream.pm Video-FFmpeg-0.47/lib/Video/FFmpeg.pm Video-FFmpeg-0.47/ppport.h Video-FFmpeg-0.47/t/ Video-FFmpeg-0.47/t/Video-FFmpeg.t Video-FFmpeg-0.47/test Video-FFmpeg-0.47/test.mp4 Video-FFmpeg-0.47/typemap Entering Video-FFmpeg-0.47 Checking configure dependencies from META.yml META.yml not found or unparsable. Fetching META.yml from search.cpan.org Fetching http://search.cpan.org/meta/Video-FFmpeg-0.47/META.yml (connected:1).......(request attempt 1/12)...Resolving search.cpan.org...(resolve attempt 1/65)......connecting to 199.15.176.161...@199.15.176.161......connected......receiving...100%......request success......Done Configuring Video-FFmpeg-0.47 ... Running Makefile.PL Perl v5.10.0 required--this is only v5.8.8, stopped at Makefile.PL line 1. BEGIN failed--compilation aborted at Makefile.PL line 1. N/A ! Configure failed for Video-FFmpeg-0.47. See /home/.cpanm/build.log for details. Perl Expect failed with non-zero exit status: 256 All available perl module install methods have failed guide me how can i install ffmpeg in cPanel Thanks for advance.

  Read the article

• High apache load but little traffic logged

  - by nrambeck

  I recently installed Varnish to sit in front of Apache on a dedicated server running a single site. It appears to be working well, but the load on Apache is still very high. What doesn't make sense is that the Apache access log shows almost no traffic getting past Varnish. When I tail the apache log I see about 1-3 hits per second come through. Here is what the load on Apache looks like : USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND apache 13834 8.1 1.0 107716 34164 ? S 08:24 0:02 /usr/sbin/httpd apache 13835 8.1 1.0 107716 33856 ? S 08:24 0:02 /usr/sbin/httpd apache 11483 7.9 0.9 105916 30788 ? S 08:23 0:06 /usr/sbin/httpd apache 12255 7.5 1.0 107476 33312 ? S 08:24 0:04 /usr/sbin/httpd apache 9340 7.2 1.1 107732 34916 ? R 08:23 0:09 /usr/sbin/httpd apache 12029 6.8 0.9 106908 30416 ? S 08:24 0:04 /usr/sbin/httpd apache 11577 6.7 1.0 107192 34180 ? S 08:24 0:05 /usr/sbin/httpd apache 11486 6.6 1.0 106176 33112 ? S 08:23 0:05 /usr/sbin/httpd apache 11796 6.4 1.0 106936 31916 ? S 08:24 0:04 /usr/sbin/httpd apache 13815 6.3 1.0 107988 34464 ? S 08:24 0:02 /usr/sbin/httpd apache 18089 6.3 1.3 107444 43212 ? S 08:11 0:52 /usr/sbin/httpd apache 11797 5.9 1.0 107716 34580 ? S 08:24 0:04 /usr/sbin/httpd apache 7655 5.9 0.0 0 0 ? Z 08:22 0:09 [httpd] <defunct> mysql 8033 5.9 6.2 318240 199512 ? Sl May14 352:34 /usr/libexec/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/va apache 11488 5.8 0.9 106924 31632 ? S 08:23 0:04 /usr/sbin/httpd apache 9375 5.7 1.1 106956 35552 ? S 08:23 0:07 /usr/sbin/httpd apache 3551 5.6 1.1 106956 36140 ? S 08:20 0:14 /usr/sbin/httpd apache 7657 5.6 1.0 106968 32472 ? S 08:22 0:09 /usr/sbin/httpd apache 11433 5.6 1.0 107716 34396 ? S 08:23 0:04 /usr/sbin/httpd apache 5505 5.5 1.1 106944 34924 ? S 08:21 0:12 /usr/sbin/httpd apache 7172 5.3 1.1 106972 35368 ? S 08:22 0:09 /usr/sbin/httpd apache 10088 5.2 0.9 106160 31240 ? S 08:23 0:04 /usr/sbin/httpd apache 7656 5.1 1.0 106436 34388 ? S 08:22 0:08 /usr/sbin/httpd apache 3468 5.0 1.1 107716 35968 ? S 08:20 0:13 /usr/sbin/httpd apache 14242 4.8 1.0 107728 33032 ? S 08:25 0:00 /usr/sbin/httpd apache 3578 4.8 1.1 107988 35964 ? S 08:20 0:12 /usr/sbin/httpd apache 28192 4.8 1.2 106944 38060 ? S 08:17 0:23 /usr/sbin/httpd apache 3277 4.6 1.1 106956 35688 ? S 08:20 0:13 /usr/sbin/httpd apache 15434 3.7 0.7 106908 24684 ? S 08:25 0:00 /usr/sbin/httpd There is a default apache log and then one other VirtualHost log setup. I'm concerned that Apache is handling some kind of traffic that is not being logged. Is that possible? And is there anything I can do to capture that traffic?

  Read the article

• Hundreds of unknown entries in Linux logwatch

  - by Saif Bechan

  I have a dedicated server which runs centos. Today i got an email from loginwatch on my server with hundreds of lines of 'errors'. I don't really know what they are becasue i am fairly new at this. The lines are in a few sections, I will display the first 10 of all of them, i hope someone can help me fix these problems. --------------------- Named Begin ------------------------ **Unmatched Entries** client 216.146.46.136 notify question section contains no SOA: 8 Time(s) client 92.114.98.10 query (cache) 'adobe.com/A/IN' denied: 4 Time(s) network unreachable resolving '11.254.75.75.in-addr.arpa/PTR/IN': 2001:7fd::1#53: 1 Time(s) network unreachable resolving '136.176.97.93.in-addr.arpa/PTR/IN': 2001:13c7:7002:3000::11#53: 1 Time(s) network unreachable resolving '136.176.97.93.in-addr.arpa/PTR/IN': 2001:500:13::c7d4:35#53: 1 Time(s) network unreachable resolving '136.176.97.93.in-addr.arpa/PTR/IN': 2001:500:2e::1#53: 2 Time(s) network unreachable resolving '136.176.97.93.in-addr.arpa/PTR/IN': 2001:610:240:0:53::193#53: 1 Time(s) network unreachable resolving '136.176.97.93.in-addr.arpa/PTR/IN': 2001:610:240:0:53::3#53: 1 Time(s) network unreachable resolving '136.176.97.93.in-addr.arpa/PTR/IN': 2001:660:3006:1::1:1#53: 1 Time(s) network unreachable resolving '136.176.97.93.in-addr.arpa/PTR/IN': 2001:6b0:7::2#53: 1 Time(s) network unreachable resolving '136.176.97.93.in-addr.arpa/PTR/IN': 2001:dc0:1:0:4777::140#53: 1 Time(s) network unreachable resolving '136.176.97.93.in-addr.arpa/PTR/IN': 2001:dc0:2001:a:4608::59#53: 1 Time(s) network unreachable resolving '146.250.19.67.in-addr.arpa/PTR/IN': 2001:5a0:10::2#53: 1 Time(s) network unreachable resolving '149.207.106.87.in-addr.arpa/PTR/IN': 2001:7fd::1#53: 1 Time(s) network unreachable resolving '178.62.24.195.in-addr.arpa/PTR/IN': 2001:7fd::1#53: 1 Time(s) this goes on for hundreds of lines with all different domain names. --------------------- pam_unix Begin ------------------------ Failed logins from: 78.86.126.211 (78-86-126-211.zone2.bethere.co.uk): 111 times 93.97.176.136 (93-97-176-136.dsl.cnl.uk.net): 113 times 121.14.145.32: 136 times 190.152.69.5: 248 times 209.160.72.15: 572 times 210.26.48.35: 2 times 212.235.111.224 (DSL212-235-111-224.bb.netvision.net.il): 140 times 218.206.25.29: 140 times Illegal users from: 78.86.126.211 (78-86-126-211.zone2.bethere.co.uk): 2665 times 93.97.176.136 (93-97-176-136.dsl.cnl.uk.net): 2539 times 121.14.145.32: 116 times 190.152.69.5: 34 times 209.160.72.15: 324 times 218.206.25.29: 8051 times proftpd: Unknown Entries: session opened for user cent_ftp by (uid=0): 15 Time(s) session closed for user cent_ftp: 14 Time(s) sshd: Authentication Failures: unknown (218.206.25.29): 8051 Time(s) unknown (78-86-126-211.zone2.bethere.co.uk): 2665 Time(s) unknown (93.97.176.136): 2539 Time(s) root (209.160.72.15): 558 Time(s) unknown (209.160.72.15): 324 Time(s) root (190.152.69.5): 246 Time(s) unknown (121.14.145.32): 116 Time(s) root (121.14.145.32): 106 Time(s) root (dsl212-235-111-224.bb.netvision.net.il): 70 Time(s) root (93.97.176.136): 44 Time(s) root (78-86-126-211.zone2.bethere.co.uk): 37 Time(s) unknown (190.152.69.5): 34 Time(s) mysql (121.14.145.32): 30 Time(s) nobody (218.206.25.29): 26 Time(s) mail (218.206.25.29): 24 Time(s) news (218.206.25.29): 24 Time(s) root (218.206.25.29): 24 Time(s) --------------------- SSHD Begin ------------------------ **Unmatched Entries** pam_succeed_if(sshd:auth): error retrieving information about user tavi : 2 time(s) pam_succeed_if(sshd:auth): error retrieving information about user pam : 2 time(s) pam_succeed_if(sshd:auth): error retrieving information about user konchog : 1 time(s) pam_succeed_if(sshd:auth): error retrieving information about user stavrum : 2 time(s) pam_succeed_if(sshd:auth): error retrieving information about user rachel : 1 time(s) pam_succeed_if(sshd:auth): error retrieving information about user affiliates : 24 time(s) pam_succeed_if(sshd:auth): error retrieving information about user nen : 1 time(s) pam_succeed_if(sshd:auth): error retrieving information about user cobra : 1 time(s) pam_succeed_if(sshd:auth): error retrieving information about user pass : 7 time(s) pam_succeed_if(sshd:auth): error retrieving information about user hacer : 1 time(s) pam_succeed_if(sshd:auth): error retrieving information about user chung : 1 time(s) pam_succeed_if(sshd:auth): error retrieving information about user zainee : 1 time(s) pam_succeed_if(sshd:auth): error retrieving information about user radu : 2 time(s) pam_succeed_if(sshd:auth): error retrieving information about user alka : 4 time(s) pam_succeed_if(sshd:auth): error retrieving information about user albert : 5 time(s) pam_succeed_if(sshd:auth): error retrieving information about user turcia : 2 time(s) pam_succeed_if(sshd:auth): error retrieving information about user cordell : 2 time(s) pam_succeed_if(sshd:auth): error retrieving information about user silver : 2 time(s) pam_succeed_if(sshd:auth): error retrieving information about user dragon : 3 time(s) If someone wants to see the whole log i can upload it somewhere. Am i being hacked, what is this all?? I hope someone can help me, this does not look good at all.

  Read the article

• Gmail and Live are making all messages from my server as spam.

  - by Ryan Kearney

  I'm getting very weird results here. When my server sends an email to my @hotmail or @gmail account, it's marked as spam. When I send email through my server from Outlook to @hotmail, it doesn't get marked as spam, but it still gets marked as spam in gmail. They seem to get through fine on Yahoo though. My servers hostname A record points to an IP address whose PTR record points back to the same domain name. The TXT record has a SPF record in it to allow email to be sent from that servers IP. I moved from a VPS to a Dedicated server when this started to happen. From what I can see, the email headers are identical. Here's one of my email headers that gmail marks as spam. Some fields were repalced. MYGMAILACCOUNT is the email address of the account the email was addressed to. USER is the name of the account on the system it was sent from HOSTNAME is the servers FQDN IPADDR is the IP Address of the Hostname MYDOMAIN is my domain name Delivered-To: MYGMAILACCOUNT Received: by 10.220.77.82 with SMTP id f18cs263483vck; Sat, 27 Feb 2010 23:58:02 -0800 (PST) Received: by 10.150.16.4 with SMTP id 4mr3886702ybp.110.1267343881628; Sat, 27 Feb 2010 23:58:01 -0800 (PST) Return-Path: <USER@HOSTNAME> Received: from HOSTNAME (HOSTNAME [IPADDR]) by mx.google.com with ESMTP id 17si4604419yxe.134.2010.02.27.23.58.01; Sat, 27 Feb 2010 23:58:01 -0800 (PST) Received-SPF: pass (google.com: best guess record for domain of USER@HOSTNAME designates IPADDR as permitted sender) client-ip=IPADDR; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of USER@HOSTNAME designates IPADDR as permitted sender) smtp.mail=USER@HOSTNAME Received: from USER by HOSTNAME with local (Exim 4.69) (envelope-from <USER@HOSTNAME>) id 1Nle2K-0000t8-Bd for MYGMAILACCOUNT; Sun, 28 Feb 2010 02:57:36 -0500 To: Ryan Kearney <MYGMAILACCOUNT> Subject: [Email Subject] MIME-Version: 1.0 Content-type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: webmaster@MYDOMAIN Message-Id: <E1Nle2K-0000t8-Bd@HOSTNAME> Sender: <USER@HOSTNAME> Date: Sun, 28 Feb 2010 02:57:36 -0500 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - HOSTNAME X-AntiAbuse: Original Domain - gmail.com X-AntiAbuse: Originator/Caller UID/GID - [503 500] / [47 12] X-AntiAbuse: Sender Address Domain - HOSTNAME Anyone have any ideas as to why all mail leaving my server gets marked as spam? EDIT: I already used http://www.mxtoolbox.com/SuperTool.aspx to check if my servers IP's are blacklisted and they are in fact not. That's what I thought at first, but it isn't the case. Update Mar 1, 2010 I received the following email from Microsoft Thank you for writing to Windows Live Hotmail Domain Support. My name is * and I will be assisting you today. We have identified that messages from your IP are being filtered based on the recommendations of the SmartScreen filter. This is the spam filtering technology developed and operated by Microsoft and is built around the technology of machine learning. It learns to recognize what is and isn't spam. In short, we filter incoming emails that look like spam. I am not able to go into any specific details about what these filters specifically entail, as this would render them useless. E-mails from IPs are filtered based upon a combination of IP reputation and the content of individual emails. The reputation of an IP is influenced by a number of factors. Among these factors, which you as a sender can control, are: The IP's Junk Mail Reporting complaint rate The frequency and volume in which email is sent The number of spam trap account hits The RCPT success rate So I'm guessing it has to do with the fact that I got an IP address with little or no history in sending email. I've confirmed that I'm not on any blacklists. I'm guessing it's one of those things that will work itself out in a month or so. I'll post when I hear more.

  Read the article

• Varnish + Nginx + multiple IP addresses

  - by adnan

  This is my first shot at making Varnish work on my dedicated server which hosts 2 domains with 2 separate IP-addresses. My simplified setup is as follows: Nginx conf server { listen ip-address-1:8080; } server { listen ip-address-2:8080; } Varnish vcl backend default { .host = "127.0.0.1"; .port = "80"; } And in the varnish conf I have defined VARNISH_LISTEN_PORT=80 Varnish and Nginx (and php-fpm) are running properly but when I try to go to my website it shows the welcome to nginx page. The headers don't have the x-varnish in it. It seems that for some reason varnish is not listening to port 80. I'm suspecting this has to do with the vcl file where it is listening to the 127.0.0.1 host. I'm running two wordpress sites. Where should I look for to get Varnish working properly? Cheers, Adnan EDIT: Nginx seems to be in 8080 correctly but Varnish is not listening to the right ip address. Using Jens multiple varnish ip addresses netstat -lnp yields: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 46.105.40.241:8080 0.0.0.0:* LISTEN 21610/nginx tcp 0 0 5.135.166.39:8080 0.0.0.0:* LISTEN 21610/nginx tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 21610/nginx tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN 2544/named tcp 0 0 0.0.0.0:21 0.0.0.0:* LISTEN 1195/vsftpd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1184/sshd tcp 0 0 127.0.0.1:953 0.0.0.0:* LISTEN 2544/named tcp 0 0 46.105.40.241:443 0.0.0.0:* LISTEN 21610/nginx tcp 0 0 5.135.166.39:443 0.0.0.0:* LISTEN 21610/nginx tcp 0 0 127.0.0.1:6082 0.0.0.0:* LISTEN 21350/varnishd tcp 0 0 :::80 :::* LISTEN 21351/varnishd tcp 0 0 ::1:53 :::* LISTEN 2544/named tcp 0 0 :::22 :::* LISTEN 1184/sshd tcp 0 0 ::1:953 :::* LISTEN 2544/named udp 0 0 127.0.0.1:53 0.0.0.0:* 2544/named udp 0 0 ::1:53 :::* 2544/named default.vcl backend ikhebeenbril { .host = "5.135.166.39"; .port = "8080"; } backend sunculture { .host = "46.105.40.241"; .port = "8080"; } sub vcl_recv { if (server.ip == "5.135.166.39") { set req.backend = ikhebeenbril; } else { set req.backend = sunculture; } ... } sub vcl_hash { hash_data(server.ip); if (req.http.host) { hash_data(req.http.host); } hash_data(req.url); if (req.http.Accept-Encoding) { hash_data(req.http.Accept-Encoding); } return (hash); } nginx server blocks server { listen 5.135.166.39:80; listen 5.135.166.39:443 default ssl spdy; server_name www.ikhebeenbril.nl; } server { listen 46.105.40.241:80; listen 46.105.40.241:443 default ssl spdy; server_name www.thesunculture.com; }

  Read the article

• DHCP and DNS services configuration for VOIP system, windows domain, etc

  - by Stemen

  My company has numerous physical offices (for purposes of this discussion, 15 buildings). Some of them are well-connected to our primary data center via fiber. Others will be connected to the data center by P2P T1. We are in the beginning stages of implementing an Avaya VOIP telephone system, and we will be replacing a significant portion of our network infrastructure in the process. In tandem with the phone system implementation, we are going to be re-addressing some of our networks, and consolidating most of our Windows domains into one (not all domains, just most). We currently have quite a few Windows domains, and they of course each have their own DNS zones. A few of those networks currently use DHCP, but the majority use static IP assignments for every device. I'm tired of managing static assignments -- I want to use DHCP configuration on everything except servers. Printers and etc will have DHCP reservations. The new IP phones will need to get IP addresses from DHCP, though they need to be in a separate VLAN from the computers/printers/etc. The computers and printers need to be registered in DNS. That's currently handled by the Windows DHCP servers on each of the respective domains. We need to place a priority on DHCP and DNS being available on a per-site basis (in case something were to interrupt the WAN connection) for computers and (primarily) phones. Smaller locations (which will have IP phones but not be a member of any Windows domain) will not have any Windows DNS/DHCP server(s) available. We also are looking for the easiest way to replace a part if it were to fail. That is to say, if a server/appliance/router hosting DHCP were to crash hard, and we couldn't extremely quickly recover the DHCP reservations and leases (and subsequently restore them onto a cold spare), we anticipate that bad things could happen. What is the best idea for how to re-implement DNS and DHCP keeping all of the above in mind? Some thoughts that have been raised (by myself or my coworkers): Use Windows DNS and DHCP servers, where they exist, and use IP helpers to route DHCP requests to some other Windows server if necessary. May not be acceptable if the WAN goes down and clients don't get a DHCP response. Use Windows DNS (everywhere, over WAN in some cases) and a mix of Windows DHCP and DHCP provided by Cisco routers. Every site would be covered for DHCP, but from what I've read, Cisco routers can't handle dynamic registration of DHCP clients to Windows DNS servers, which might create a problem where Cisco routers are used for DHCP. Use Windows DNS (everywhere, over WAN in some cases) and a mix of Windows DHCP and DHCP provided by some service running on an extremely low-price linux server. Is there any such software that would allow DHCP leases granted by these linux boxes to be dynamically registered on the Windows DNS servers? Come up with a Linux solution for both DNS and DHCP, and deploy low-price linux servers to every site. Requirements would be that the DNS zone be multi-master (like Windows DNS integrated with Active Directory), that DHCP be able to make dynamic DNS registrations in that zone, for every lease (where a hostname is provided and is thus possible), and that multiple servers be either authoritative for the same DHCP scope or at least receiving a real-time copy / replication / sync of the leases table so that if one server dies, we still know which MAC has what address. Purchase dedicated DNS/DHCP appliances, deploying to all sites. From what I read/see, this solves all of our technical problems. Then come the financial problems... I don't have a ton of money to spend on this. Or, some other solution that we've thus far overlooked and will consider upon recommendation. Can Cisco routers or Windows servers sync DHCP lease tables so that multiple servers can be authoritative (or active/passive for all I care) for the same scope, in case one of the partners were to fail? I've read online (repeatedly) that ISC's DHCP is able to maintain the same lease table across multiple servers, in order to solve this problem. Does anyone have any experience or advice to regarding that?

  Read the article

• Troubleshooting PHP email sending?

  - by darkAsPitch

  I created a website that occasionally emails users when they register/change their password/etc. Every other person however cannot or does not receive the emails. They are telling me that they are not even hitting their spam folders. I don't know a ton about MX records or email sending, but when I "Edit DNS Zone" for this domain in particular there is 1 MX record listed there. How do you go about troubleshooting botched PHP mail actions? UPDATE: Here is my super-simple php mailing code: $subject = "Subject Here"; $message = "Emails Message"; $to = $verified_user_data["email_address"]; $headers = "From: [email protected]\r\n" . "Reply-To: [email protected]\r\n" . "X-Mailer: PHP/" . phpversion(); //returns true on success, false on failure $email_result = mail($to, $subject, $message, $headers); re: "are you saying that some do and some do not?" @ Jacob Yes, basically. I send the emails containing the user's login username/password using similar code above. And I sell to fairly tech-savvy people. About 50% of the time, my customers claim they cannot find their welcome emails in their inbox OR in their spam box. It's as if it never arrived. I have the largest problem with Yahoo email addresses accepting my emails or so it seems. re: "The MX record at your end doesn't factor in, although the SPF record (or lack of it) will. How much access and control do you have on the server itself?" @ John Gardeniers I rent a dedicated server from Codero. Running CentOS 5, WHM + cPanel. I have full root access to the entire thing. Don't know much about MX records and/or SPF records. I just want the PHP mail function to work. It doesn't say much about that on the php mail function's help page. re: "What are you using for the SMTP server?" @ JonLim No idea. I use the code above when I need to fire off an email to a loyal customer, and that's it. Do I need to be worrying about SMTP servers? re: "Could be many, many things. Can you describe how you're sending mail in your code? i.e. are you relaying off of another mail server somewhere, using the local sendmail or postfix? Any consistency in domains that can/cannot receive email? Do you have a PTR record setup from the IP address that you're sending mail out as? What about SPF records?" @ gravyface I just described my simple code above! I believe I have been having the most trouble with Yahoo domains, however "independent" domains (probably running spamassasin) ex. [email protected] as opposed to [email protected] seem to give a lot of trouble as well. I do not know if I have a PTR record setup from the IP address I'm sending my mail from. It's probably the same IP address that I setup my domain on, because I didn't do anything extra special. No idea about SPF records either, where can I go to create one? Side Note: It's a crying shame what havoc the spammers have brought upon our beloved email system.

  Read the article

• Have I pushed the limits of my current VPS or is there room for optimization?

  - by JRameau

  I am currently on a mediatemple DV server (basic) 512mb dedicated ram, this is a CentOS based VPS with Plesk and Virtuozzo. My experience with it from day 1 has been bad and I only could sooth my server issues with several caching "Band-aids," but my sites are not as small as they were a year ago either so the issues have worsen. I have 3 Drupal installs running on separate (plesk) domains, 1 of those drupal installs is a multisite, that consists of 5-6 sites 2 of those sites are bringing in actual traffic. Those caching "Band-aids" I mentioned are APC, which seemed to help alot initially, and Drupal's Boost, which is considered a poorman's Varnish, it makes all my pages static for anonymous users. Last 30day combined estimate on Google Ananlytics: 90k visitors 260k pageviews. Issue: alot of downtime, I am continually checking if my sites are up, and lately I have been finding it down more than 3 times daily. Restarting Apache will bring it back up, for some time. I have google search every error message and looked up ways to optimize my DV server, and I am beyond stump what is my next move. Is this server bad, have I hit a impossibly low restriction such as the 12mb kernel memory barrier (kmemsize), is it on my end, do I need to optimize some more? *I have provided as much information as I can below, any help or suggestions given will be appreciated Common Error messages I see in the log: [error] (12)Cannot allocate memory: fork: Unable to fork new process [error] make_obcallback: could not import mod_python.apache.\n Traceback (most recent call last): File "/usr/lib/python2.4/site-packages/mod_python/apache.py", line 21, in ? import traceback File "/usr/lib/python2.4/traceback.py", line 3, in ? import linecache ImportError: No module named linecache [error] python_handler: no interpreter callback found. [warn-phpd] mmap cache can't open /var/www/vhosts/***/httpdocs/*** - Too many open files in system (pid ***) [alert] Child 8125 returned a Fatal error... Apache is exiting! [emerg] (43)Identifier removed: couldn't grab the accept mutex [emerg] (22)Invalid argument: couldn't release the accept mutex cat /proc/user_beancounters: Version: 2.5 uid resource held maxheld barrier limit failcnt 41548: kmemsize 4582652 5306699 12288832 13517715 21105036 lockedpages 0 0 600 600 0 privvmpages 38151 42676 229036 249036 0 shmpages 16274 16274 17237 17237 2 dummy 0 0 0 0 0 numproc 43 46 300 300 0 physpages 27260 29528 0 2147483647 0 vmguarpages 0 0 131072 2147483647 0 oomguarpages 27270 29538 131072 2147483647 0 numtcpsock 21 29 300 300 0 numflock 8 8 480 528 0 numpty 1 1 30 30 0 numsiginfo 0 1 1024 1024 0 tcpsndbuf 648440 675272 2867477 4096277 1711499 tcprcvbuf 301620 359716 2867477 4096277 0 othersockbuf 4472 4472 1433738 2662538 0 dgramrcvbuf 0 0 1433738 1433738 0 numothersock 12 12 300 300 0 dcachesize 0 0 2684271 2764800 0 numfile 3447 3496 6300 6300 3872 dummy 0 0 0 0 0 dummy 0 0 0 0 0 dummy 0 0 0 0 0 numiptent 14 14 200 200 0 TOP: (In January the load avg was really high 3-10, I was able to bring it down where it is currently is by giving APC more memory play around with) top - 16:46:07 up 2:13, 1 user, load average: 0.34, 0.20, 0.20 Tasks: 40 total, 2 running, 37 sleeping, 0 stopped, 1 zombie Cpu(s): 0.3% us, 0.1% sy, 0.0% ni, 99.7% id, 0.0% wa, 0.0% hi, 0.0% si Mem: 916144k total, 156668k used, 759476k free, 0k buffers Swap: 0k total, 0k used, 0k free, 0k cached MySQLTuner: (after optimizing every table and repairing any table with overage I got the fragmented count down to 86) [--] Data in MyISAM tables: 285M (Tables: 1105) [!!] Total fragmented tables: 86 [--] Up for: 2h 44m 38s (409K q [41.421 qps], 6K conn, TX: 1B, RX: 174M) [--] Reads / Writes: 79% / 21% [--] Total buffers: 58.0M global + 2.7M per thread (100 max threads) [!!] Query cache prunes per day: 675307 [!!] Temporary tables created on disk: 35% (7K on disk / 20K total)

  Read the article

• Multiple Homed Windows 2008 Server / Windows 7 Client

  - by Daniel Scott

  I have a small Windows 2008 network, with some Windows 7 clients. The clients are both laptops with docking stations and I would like them to communicate with the Windows 2008 server (for filesharing) through the wired network whilst they're docked. Internet connectivity for all machines (clients and server) is via a Wireless LAN, so the wireless adapter in the Windows 7 clients stays active while they're docked. When the laptops are un-docked, it would be nice to still be able to contact the windows 2008 server for print sharing (and slower file sharing) - hence the server also being on the wireless LAN. The windows 2008 server is running Active Directory, DHCP and DNS. It controls DHCP leases on the wired network and holds the DNS records for "myserver.mycompany.local", which is what the filesharing clients connect to. Ideally I'd like the DNS records to return the wired IP first so that this is the address that the laptops will attempt initially - but there doesn't seem to be a way to do that? At present the server's IP on the wireless LAN comes out of an nslookup above the wired Lan IP. The multi-homing works perfectly - but in the wrong order! Switch on the wireless lan and ping myserver and it goes to the wireless IP. Disable the wireless on the client and do the same ping again and after a couple of seconds it starts pinging the wired address. Does anyone have any suggestions on how to make this work in a predictable order? - or even if it can work. Alternative 1? If it can't work, then would this work: Remove the wireless adapter from the server, put a wireless router/bridge on the wired network (set up to route to/from the wireless LAN's subnet), then configure the clients with two routes to the (now) single IP of the server with metrics favouring direct communication over the wired LAN first? Alternative 2? Should I instead single-home the laptops so all of their connectivity is via the wired-LAN while they're docked? (and route via the windows 2008 server - or a dedicated wireless bridge/router)? My concern here is that I'd like undocking to be seamless - and if the clients are in the middle of downloading something from the internet I wouldn't want whatever they're doing interupted as they switch IP addresses onto the Wireless network. Perhaps this isn't the case and I'm concerned over nothing? Any thoughts? :) UPDATE I seem to have cracked it (at least DNS entries come out in the order I hope for - and pinging the server with various combinations of wired, wireless and both interfaces enabled uses the IP I want) ... I set the binding order of the NICs on the Server (which is acting as Domain Controller, DHCP and DNS server) so that the Wired NIC is before the Wireless adapter. (Start -- type "Network Interfaces" -- Select "View Network Connections" -- Press Alt to show classic dropdown menus -- Advanced -- Advanced Settings) Now, an nslookup (from the client) of the server's hostname returns the Wired IP first, followed by the Wireless IP. The wired IP now seems to be used whenever it's contactable. Incidentally, the metrics on the wired and wireless routes (on the client) also favour the wired LAN (based on Windows' automatically assigned metrics) - but this was always the case, even when I was having trouble getting the wired IP to be "favoured". I'm not entirely sure if this is coincidence - or if a DNS server running on Windows, handing back IP addresses for itself does actually take the binding order of it's own network interfaces into account? It would be interesting to hear from someone who can confirm or deny that (or confirm that the binding order on the server plays a role for some other reason?)

  Read the article

• Tuning performance of Ubuntu 10.04 on Compaq Evo W4000.

  - by Fantomas

  Hi, I got this computer free and installed Ubuntu 10.04 on it + updates, plus followed the following tutorial all the way: http://www.unixmen.com/linux-tutorials/937-things-to-do-after-installing-ubuntu-1004-lts-lucid-lynx I love the Docky which comes with it, but the computer has been running rather slowly. The System: kernel 2.6.32-22-generic Gnome 2.30.0 (I like Gnome!) Memory: 1GB Processor: Intel (R) Pentium (R) 4 CPU 1700 MHz (needless to say, it is 32 bit). I think I dedicated 128 Mb to video memory while installing, but cannot find this setting now. I did also install an NVidia driver for the 3D card, so I probably want to reclaim that memory back. I want to trim the fat but I also want to keep some of the sex appeal of Ubuntu 10.04. I will gift this computer to a friend, who will use it for Internet, music, videos, word processing, Skype and instant messaging - he is non-technical, so this hardware and Linux should work for him; I just need to speed it up while keeping the good software and having a nice UI. I sort of know my way around Linux, but not that well. Feel free to ask me to run particular commands if you want more info. For starters, here are the services below. Which ones can I kill and how? What else can go? There is no need to run ssh or ftp or http or ntp servers. As I said before, this computer is for non-technical person. There is also absolutely no bluetooth or wireless networking needed - it will feed off a regular ethernet cable. What I do not want to do is reinstall some other distro or recompile a kernel. I want to make it 80% perfect spending 20% of the energy :) Thanks! $ service --status-all [ ? ] acpi-support [ ? ] acpid [ ? ] alsa-mixer-save [ ? ] anacron [ - ] apparmor [ ? ] apport [ ? ] atd [ ? ] avahi-daemon [ ? ] binfmt-support [ - ] bluetooth [ - ] bootlogd [ - ] brltty [ ? ] console-setup [ ? ] cron [ + ] cups [ ? ] dbus [ ? ] dmesg [ ? ] dns-clean [ ? ] failsafe-x [ - ] fancontrol [ ? ] gdm [ - ] grub-common [ ? ] hostname [ ? ] hwclock [ ? ] hwclock-save [ ? ] irqbalance [ - ] kerneloops [ ? ] killprocs [ - ] lm-sensors [ ? ] module-init-tools [ ? ] network-interface [ ? ] network-interface-security [ ? ] network-manager [ ? ] networking [ ? ] ondemand [ ? ] pcmciautils [ ? ] plymouth [ ? ] plymouth-log [ ? ] plymouth-splash [ ? ] plymouth-stop [ ? ] pppd-dns [ ? ] procps [ + ] pulseaudio [ ? ] rc.local [ - ] rsync [ ? ] rsyslog [ - ] saned [ ? ] screen-cleanup [ ? ] sendsigs [ ? ] speech-dispatcher [ ? ] stop-bootlogd [ ? ] stop-bootlogd-single [ ? ] udev [ ? ] udev-finish [ ? ] udevmonitor [ ? ] udevtrigger [ ? ] ufw [ ? ] umountfs [ ? ] umountnfs.sh [ ? ] umountroot [ ? ] unattended-upgrades [ - ] urandom [ + ] winbind [ ? ] wpa-ifupdown [ - ] x11-common

  Read the article

• Why do we need different CPU architecture for server & mini/mainframe & mixed-core?

  - by claws

  Hello, I was just wondering what other CPU architectures are available other than INTEL & AMD. So, found List of CPU architectures on Wikipedia. It categorizes notable CPU architectures into following categories. Embedded CPU architectures Microcomputer CPU architectures Workstation/Server CPU architectures Mini/Mainframe CPU architectures Mixed core CPU architectures I was analyzing the purposes and have few doubts. I taking Microcomputer CPU (PC) architecture as reference and comparing others. Embedded CPU architecture: They are a completely new world. Embedded systems are small & do very specific task mostly real time & low power consuming so we do not need so many & such wide registers available in a microcomputer CPU (typical PC). In other words we do need a new small & tiny architecture. Hence new architecture & new instruction RISC. The above point also clarifies why do we need a separate operating system (RTOS). Workstation/Server CPU architectures I don't know what is a workstation. Someone clarify regarding the workstation. As of the server. It is dedicated to run a specific software (server software like httpd, mysql etc.). Even if other processes run we need to give server process priority therefore there is a need for new scheduling scheme and thus we need operating system different than general purpose one. If you have any more points for the need of server OS please mention. But I don't get why do we need a new CPU Architecture. Why cant Microcomputer CPU architecture do the job. Can someone please clarify? Mini/Mainframe CPU architectures Again I don't know what are these & what miniframes or mainframes used for? I just know they are very big and occupy complete floor. But I never read about some real world problems they are trying to solve. If any one working on one of these. Share your knowledge. Can some one clarify its purpose & why is it that microcomputer CPU archicture not suitable for it? Is there a new kind of operating system for this too? Why? Mixed core CPU architectures Never heard of these. If possible please keep your answer in this format: XYZ CPU architectures Purpose of XYZ Need for a new architecture. why can't current microcomputer CPU architecture work? They go upto 3GHZ & have upto 8 cores. Need for a new Operating System Why do we need a new kind of operating system for this kind of archictures?

  Read the article

• ubuntu 10.04; kvm bridged networking not working with public ip addresses

  - by senorsmile

  I have a dedicated hosted server box with ubuntu 10.04 64 bit installed. I would like to run kvm with ubuntu 8.04 installed for some php 5.2 compatible apps(they don't work right with php 5.3, the default in ubuntu 10.04). I installed KVM as instructed at https://help.ubuntu.com/community/KVM/Installation . I installed the vm using virt-manager. I never could figure out how use virt-install or any of those automated installers. I just installed it using the disc. I set up bridged networking as per https://help.ubuntu.com/community/KVM/Networking . However, the bridged connection doesn't work. Here's my /etc/network/interfaces on the host, running ubuntu 10.04. (with specific public ip blanked) auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address xx.xx.xx.xx netmask 255.255.255.248 gateway xx.xx.xx.xa bridge_ports eth0 bridge_stp on bridge_fd 0 bridge_maxwait 10 ` Here's my /etc/network/interfaces on the guest, running ubuntu 8.04. auto lo iface lo inet loopback auto eth0 iface eth0 inet static address xx.xx.xx.xy netmask 255.255.255.248 gateway xx.xx.xx.xa The two vm's can communicate to each other. But, the guest vm can't access anyone in the real world. Here's my /etc/libvirt/qemu/store_804.xml <domain type='kvm'> <name>store_804</name> <uuid>27acfb75-4f90-a34c-9a0b-70a6927ae84c</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>2</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/store_804.img'/> <target dev='hda' bus='ide'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> </disk> <interface type='bridge'> <mac address='52:54:00:26:0b:c6'/> <source bridge='br0'/> <model type='virtio'/> </interface> <console type='pty'> <target port='0'/> </console> <console type='pty'> <target port='0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes'/> <sound model='es1370'/> <video> <model type='cirrus' vram='9216' heads='1'/> </video> </devices> </domain> Any idea where I've gone wrong?

  Read the article

• Issues configuring Exchange 2010 as well as SSL problems.

  - by Eric Smith

  Possibly-Relevant Background Info: I've recently moved up from icky shared hosting to a glorious, Remote Desktop-administrated VPS server running Windows Server 2008 R2. Even though I'm only 21 now and a computer science major, I've tried to play with every Windows Server release since '03, just to learn new things. What usually happens is inevitably I'll do something wrong and pretty much ruin the install. You're dealing with an amateur here :) Through the past few months of working with my new server, I've mastered DNS, IIS, got Team Foundation Server running (yay!), and can install all of the other basics like SQL Server and Active Directory. The Problem: Now, these last few weeks I've been trying to install Exchange Server 2010 (SP1). To make a long story short, it took me several attempts, and I even had to get my server wiped just so I could start fresh since Exchange decided uninstalling properly was for sissies (cost me $20, bah). Today, at long last, I got Exchange mostly working. There were two main problems left, however, that left me unsatisfied: Exchange installed itself and all of its child sites into Default Web Site. I wanted to access Exchange via mail.domain.com, but instead everything was configured to domain.com. My limited server admin knowledge was not enough to configure IIS or Exchange to move itself over to the website I had set up for it, appropriately titled 'mail.domain.com', which I had bound to a dedicated IP address (I was told this was necessary, but he may have been wrong). I have two SSL certificates: one for my main domain and one for my mail subdomain. For whatever reason, I had issues geting Exchange to use my mail certificate, even though I had assigned the proper roles in the MMC. I did, at one point, get it to work (or mostly work, anyways. Frankly, my memory of today is clouded by intense frustration). Additionally, I was confused which type of SSL certificate I should be using for Exchange. My SSL provider, GoDaddy, allows me to request a new certificate whenever, so I can use either the certificate request provided by IIS or the more complicated and specific request you can create with Exchange. Which type should I be using, the IIS or Exchange certificate? If I must use the Exchange certificate, will that 1) cause issues when I bind that certificate to my mail.domain.com subdomain or 2) is that an unnecessary step? The SSL Certificate Strikes Back When I thought I had the proper SSL certificate assigned for those brief, sweet moments, Google Chrome reported the correct mail.domain.com certificate when browsing https://mail.domain.com. However, Outlook 2010 threw up an error when trying to configure my email account claiming that the certificate didn't match the domain of "mail.domain.com". Is this an issue that will be resolved by problem #2 or is it a separate one entirely? Apologies for the massive wall of text, but I wanted to provide as much info as I possibly could. Exchange is the last thing I'd like installed on my server, and naturally it's turning out to be the hardest. Thanks for any info at all. Even a point in a vague direction would be a huge help at this point. Thanks! -Eric P.S.: The reason I keep ruining my install is that when I attempt to uninstall Exchange, something invariably goes wrong. The last time the uninstaller complained that there was still a mailbox active and it couldn't proceed until I deleted it. ... The only mailbox left was the Administrator account, the built-in one I couldn't delete. So I attempted to manually uninstall it following several guides online only to now be stuck unable to launch the installer and have to get my system wiped AGAIN for the second time today ($40 down the drain, bah!). I do not understand at all why "uninstall" just can't mean "hey, you, delete everything and go away". There's not even a force uninstall option, only a "recover system" option that just fails to fix anything and makes it so I can't even use the GUI uninstaller. </rant>

  Read the article

• Load average is have been high over some period

  - by user111196

  We have a dedicated MySQL server and below is the a snapshot of the top. The load average has been staying at nearly 100 for an hour plus ready. top - 20:54:28 up 7:31, 2 users, load average: 83.08, 96.88, 106.23 Tasks: 278 total, 2 running, 274 sleeping, 2 stopped, 0 zombie Cpu0 : 18.8%us, 10.2%sy, 0.0%ni, 70.9%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu1 : 51.2%us, 4.3%sy, 0.0%ni, 44.2%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st Cpu2 : 9.0%us, 10.3%sy, 0.0%ni, 80.6%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu3 : 18.8%us, 7.4%sy, 0.0%ni, 73.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu4 : 7.8%us, 8.8%sy, 0.0%ni, 83.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu5 : 10.3%us, 8.4%sy, 0.0%ni, 81.4%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu6 : 6.2%us, 7.5%sy, 0.0%ni, 86.2%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu7 : 6.2%us, 6.2%sy, 0.0%ni, 87.3%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st Cpu8 : 8.8%us, 10.4%sy, 0.0%ni, 80.5%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st Cpu9 : 63.7%us, 4.6%sy, 0.0%ni, 12.2%id, 0.0%wa, 4.3%hi, 15.2%si, 0.0%st Cpu10 : 9.2%us, 10.2%sy, 0.0%ni, 80.6%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu11 : 17.3%us, 5.9%sy, 0.0%ni, 76.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu12 : 8.0%us, 8.7%sy, 0.0%ni, 83.3%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu13 : 10.9%us, 7.4%sy, 0.0%ni, 81.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu14 : 6.2%us, 6.9%sy, 0.0%ni, 86.9%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Cpu15 : 4.8%us, 6.1%sy, 0.0%ni, 89.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 33009800k total, 23174396k used, 9835404k free, 120604k buffers Swap: 35061752k total, 0k used, 35061752k free, 16459540k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3341 mysql 20 0 14.3g 4.6g 4240 S 417.8 14.5 1673:51 mysqld 24406 root 20 0 15008 1292 876 R 0.3 0.0 0:00.19 top 1 root 20 0 4080 852 608 S 0.0 0.0 0:01.92 init 2 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root RT -5 0 0 0 S 0.0 0.0 0:00.32 migration/0 4 root 15 -5 0 0 0 S 0.0 0.0 0:00.29 ksoftirqd/0 5 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 6 root RT -5 0 0 0 S 0.0 0.0 0:03.21 migration/1 7 root 15 -5 0 0 0 S 0.0 0.0 0:00.07 ksoftirqd/1 8 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 9 root RT -5 0 0 0 S 0.0 0.0 0:00.17 migration/2 10 root 15 -5 0 0 0 S 0.0 0.0 0:00.03 ksoftirqd/2 11 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 12 root RT -5 0 0 0 S 0.0 0.0 0:00.32 migration/3 13 root 15 -5 0 0 0 S 0.0 0.0 0:00.02 ksoftirqd/3 14 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 15 root RT -5 0 0 0 S 0.0 0.0 0:00.10 migration/4 16 root 15 -5 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/4 17 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/4 18 root RT -5 0 0 0 S 0.0 0.0 0:00.35 migration/5 We have also tried to run this command. What else command can help us diagnose the exact problem of this high load? netstat -nat |grep 3306 | awk '{print $6}' | sort | uniq -c | sort -n 1 LISTEN 1 SYN_RECV 410 ESTABLISHED 964 TIME_WAIT Output of vmstat 1: ---------------memory--------------- --swap-- --io-- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 2 0 0 12978936 30944 15172360 0 0 259 3 184 265 6 6 77 12 0

  Read the article

• Installing chrome in Centos 6.2 (Final)

  - by usjes

  I need to install chrome in a dedicated centos server where I only access via ssh, it doesn't have X or any windows graphical stuff. I need it to be able to pack extensions using google-chrome --pack-extension. I tried adding this to /etc/yum.repos.d/google.repo [google-chrome] name=google-chrome - 32-bit baseurl=http://dl.google.com/linux/chrome/rpm/stable/i386 enabled=1 gpgcheck=1 gpgkey=https://dl-ssl.google.com/linux/linux_signing_key.pub And then yum install google-chrome-stable, but there's a huge list of dependencies problems: How can I install chrome without breaking anything else? UPDATE: Ok, I installed perl-CGI from .rpm because yum couldn't find it, now dependencies resolve and it show me this list of packages to install: Dependencies Resolved ============================================================================================================================================================================================================================================= Package Arch Version Repository Size ============================================================================================================================================================================================================================================= Installing: google-chrome-stable x86_64 19.0.1084.52-138391 google-chrome 35 M Installing for dependencies: ConsoleKit x86_64 0.4.1-3.el6 base 82 k ConsoleKit-libs x86_64 0.4.1-3.el6 base 17 k GConf2 x86_64 2.28.0-6.el6 base 964 k ORBit2 x86_64 2.14.17-3.1.el6 base 168 k bc x86_64 1.06.95-1.el6 base 110 k cdparanoia-libs x86_64 10.2-5.1.el6 base 47 k cups x86_64 1:1.4.2-44.el6_2.3 updates 2.3 M dbus x86_64 1:1.2.24-5.el6_1 base 207 k desktop-file-utils x86_64 0.15-9.el6 base 47 k ed x86_64 1.1-3.3.el6 base 72 k eggdbus x86_64 0.6-3.el6 base 91 k foomatic x86_64 4.0.4-1.el6_1.1 base 251 k foomatic-db noarch 4.0-7.20091126.el6 base 980 k foomatic-db-filesystem noarch 4.0-7.20091126.el6 base 4.4 k foomatic-db-ppds noarch 4.0-7.20091126.el6 base 19 M ghostscript x86_64 8.70-11.el6_2.6 updates 4.4 M ghostscript-fonts noarch 5.50-23.1.el6 base 751 k gstreamer x86_64 0.10.29-1.el6 base 764 k gstreamer-plugins-base x86_64 0.10.29-1.el6 base 942 k gstreamer-tools x86_64 0.10.29-1.el6 base 23 k iso-codes noarch 3.16-2.el6 base 2.4 M lcms-libs x86_64 1.19-1.el6 base 100 k libIDL x86_64 0.8.13-2.1.el6 base 83 k libXScrnSaver x86_64 1.2.0-1.el6 base 19 k libXfont x86_64 1.4.1-2.el6_1 base 128 k libXv x86_64 1.0.5-1.el6 base 21 k libfontenc x86_64 1.0.5-2.el6 base 24 k libgudev1 x86_64 147-2.40.el6 base 59 k libmng x86_64 1.0.10-4.1.el6 base 165 k libogg x86_64 2:1.1.4-2.1.el6 base 21 k liboil x86_64 0.3.16-4.1.el6 base 121 k libtheora x86_64 1:1.1.0-2.el6 base 129 k libvisual x86_64 0.4.0-9.1.el6 base 135 k libvorbis x86_64 1:1.2.3-4.el6_2.1 updates 168 k mailx x86_64 12.4-6.el6 base 234 k man x86_64 1.6f-29.el6 base 263 k mesa-libGLU x86_64 7.11-3.el6 base 201 k nvidia-graphics195.30-libs x86_64 195.30-120.el6 atrpms 13 M openjpeg-libs x86_64 1.3-7.el6 base 59 k pax x86_64 3.4-10.1.el6 base 69 k phonon-backend-gstreamer x86_64 1:4.6.2-20.el6 base 125 k polkit x86_64 0.96-2.el6_0.1 base 158 k poppler x86_64 0.12.4-3.el6_0.1 base 557 k poppler-data noarch 0.4.0-1.el6 base 2.2 M poppler-utils x86_64 0.12.4-3.el6_0.1 base 73 k portreserve x86_64 0.0.4-4.el6_1.1 base 22 k qt x86_64 1:4.6.2-20.el6 base 4.0 M qt-sqlite x86_64 1:4.6.2-20.el6 base 50 k qt-x11 x86_64 1:4.6.2-20.el6 base 12 M qt3 x86_64 3.3.8b-30.el6 base 3.5 M redhat-lsb x86_64 4.0-3.el6.centos base 24 k redhat-lsb-graphics x86_64 4.0-3.el6.centos base 12 k redhat-lsb-printing x86_64 4.0-3.el6.centos base 11 k sgml-common noarch 0.6.3-32.el6 base 43 k time x86_64 1.7-37.1.el6 base 26 k tmpwatch x86_64 2.9.16-4.el6 base 31 k xdg-utils noarch 1.0.2-17.20091016cvs.el6 base 58 k xml-common noarch 0.6.3-32.el6 base 9.5 k xorg-x11-font-utils x86_64 1:7.2-11.el6 base 75 k xz x86_64 4.999.9-0.3.beta.20091007git.el6 base 137 k xz-lzma-compat x86_64 4.999.9-0.3.beta.20091007git.el6 base 16 k Transaction Summary ============================================================================================================================================================================================================================================= Install 62 Package(s) Is it safe to continue and install all that or could I break something already installed?

  Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >