Search Results

Search found 2346 results on 94 pages for 'dedicated'.

Page 87/94 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

  • Supermicro IPMI on MBD-X8DAH+-F-O motherboard. Keyboard and mouse do not work after booting Windows Server 2008 R2

    - by LDelgado
    Hell Everyone, I built a server with the mentioned motherboard. I installed Windows Server 2008 R2 Enterprise on this server. IPMI is integrated on the motherboard with its own dedicated NIC. I've got that NIC configured with its own IP address. I can remote into it using IPMI, and I can remotely control the server settings before booting the OS ( BIOS, RAID configuration, etc). When the OS boots, I lose the mouse and keyboard. I cannot use the keyboard or mouse when installing the OS either. So the Keyboard and Mouse only work when no OS is loaded. Once the OS loads I lose it - that is my problem. I've been doing some research and trying a few things, but I have not been successful in fixing this issue. I may be wrong, but based on the things I've found online, it seems that the problem could be caused by the way the OS handles USB. The server is headless. There is no keyboard, mouse, or monitor plugged into it. When I boot up the OS and remote into it, I cannot see a mouse or keyboard listed in the Device Manager. Based on what I've read, it seems that the OS should detect a mouse and a keyboard when connecting remotely via IPMI. The following are the solutions I've tried. Nothing has worked so far: I've updated the firmware of the IPMI component to the latest firmware - 1.33. I made sure that the mouse mode was set to Absolute (Windows OS). I've loaded the factory defaults several times. I've enabled Port64h/60h Emulation under the USB settings in the BIOS. I've disabled USB legacy support in the BIOS. I made sure the firewall wasn't blocking IPMI (disabled the firewall). And that's about it. I've found threads in some forums from people having the same issue as me, but they were not running the same OS. They were either running Linux or FreeBSD. Most of them fixed their problem by selecting the right mouse mode (Linux in their case). There was one other that solved the problem by disabling USB Mass Storage mode. He stated "When I set it to disable USB Mass Storage when no image is loaded, the ukbd came alive, and I'm typing this on the IPMI Console. " source: http://freebsd.1045724.n5.nabble.com/IPMI-Console-No-luck-once-OS-is-booted-td3967868.html I suspect the solution described in the previous paragraph is somehow related to my problem. I've found several threads on the internet with issues describing the same problem, but none of them were with Windows Server 2008 R2. Again, I may be wrong, but it seems like that could be the issue. I just don't know how I go about applying a solution in Windows Server 2008 R2. In any case, I could use your expertise. Maybe I am missing something, or maybe I'm on the right track. Your help is much appreciated. Thank you in advance,

    Read the article

  • Specifying a Postfix Instance to send outbound email

    - by Catherine Jefferson
    I have a CentOS 6.5 server running Postfix 2.6x (the default distribution) with five public IPv4 IPs bound to it. Each IP has DNS and rDNS set separately. Each uses a different hostname at a different domain. I have five Postfix instances, one bound to each IP, like this example: 192.168.34.104 red.example.com /etc/postfix 192.168.36.48 green.example.net /etc/postfix-green 192.168.36.49 pink.example.org /etc/postfix-pink 192.168.36.50 orange.example.info /etc/postfix-orange 192.168.36.51 blue.example.us /etc/postfix-blue I've tested each IP by telneting to port 25. Postfix answers and banners properly with the correct hostname. Email is received on all of these instances with no problems and is routed to the correct place. This setup, minus the final instance, has existed for a couple of years and works. I never bothered to set up outbound email to go through any but the main instance, however; there was no need. Now I need to send email from blue.example.us that actually leaves from that interface and IP, such that the Received headers show blue.example.us as the sending mailhost, so that SPF and DKIM validate, etc etc. The email that will be sent from blue.example.com is a feedback loop sent by a single shell account on the server (account5), an account that is dedicated to sending this email. The account receives the feedback loop emails from servers on other networks, saves the bodies of those emails, and then generates a new outbound email header, appends the saved body, and sends the email. It's sending by piping each email to sendmail -oi -t. We're doing it this way to mask the identities of the initial servers. The procmail script that processes these emails works correctly. However, I cannot configure this account to send email through the proper Postfix instance/IP/interface. The exact same account and script sends email through the main Postfix instance /etc/postfix without any issues. When I change MAIL_CONFIG to point to /etc/postfix-blue in either .bash_profile or the Procmail script that handles this email, though, I get this error: sendmail: fatal: User account5(###) is not allowed to submit mail I've read the manuals on Postfix.org, searched Google, and tried the suggestions in three previous answers here on ServerFault.com: Postfix - specify interface to deliver outbound mail on Postfix user is not allowed to submit mail Postfix rejects php mails I have been careful to stop and restart Postfix after each configuration change, and tested the results. Nothing has worked. The main postfix instance happily accepts outbound email from account5. The postfix-blue instance continues to reject email from account5 with the sendmail error above. As tempting as it is to blame machine hostility, I know that I must be missing something or doing something wrong. Does anybody have any suggestions as to what it might be? Please feel free to ask for further information about my setup if you need it. =-=-=-=-=-=-=-=-=-= At the request of the responder, here are main.cf and master.cf for a) the main postfix instance ("red.example.com") and b) the FBL instance ("blue.example.us") [NOTE: All parameters not specified below were left at the default Postfix 2.6 settings] MAIN: master.cf smtp inet n - n - - smtpd main.cf myhostname = red.example.com mydomain = example.com inet_interfaces = $myhostname, localhost inet_protocols = all lmtp_host_lookup = native smtp_host_lookup = native ignore_mx_lookup_error = yes mydestination = $myhostname, localhost.$mydomain, localhost local_recipient_maps = mynetworks = 192.168.34.104/32 relay_domains = example.com, example.info, example.net, example.org, example.us relayhost = [192.168.34.102] # Separate physical server, main mailserver. relay_recipient_maps = hash:/etc/postfix/relay_recipients alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases smtpd_banner = $myhostname ESMTP $mail_name multi_instance_wrapper = ${command_directory}/postmulti -p -- multi_instance_enable = yes multi_instance_directories = /etc/postfix-green /etc/postfix-pink /etc/postfix-orange /etc/postfix-blue FBL: master.cf 184.173.119.103:25 inet n - n - - smtpd main.cf myhostname = blue.example.us mydomain = blue.example.us <= Deliberately set to subdomain only. myorigin = $mydomain inet_interfaces = $myhostname lmtp_host_lookup = native smtp_host_lookup = native ignore_mx_lookup_error = yes mydestination = $myhostname local_recipient_maps = unix:passwd.byname $alias_maps $virtual_alias_maps mynetworks = 192.168.36.51/32, 192.168.35.20/31 <= Second IP is backup MX servers relay_domains = $mydestination recipient_canonical_maps = hash:/etc/postfix-blue/canonical virtual_alias_maps = hash:/etc/postfix-fbl/virtual alias_maps = hash:/etc/aliases, hash:/etc/postfix-blue/canonical alias_maps = hash:/etc/aliases, hash:/etc/postfix-blue/canonical mailbox_command = /usr/bin/procmail -a "$EXTENSION" DEFAULT=$HOME/Mail/ MAILDIR=$HOME/Mail smtpd_banner = $myhostname ESMTP $mail_name authorized_submit_users = multi_instance_name = postfix-blue multi_instance_enable = yes

    Read the article

  • why is my centos, nginx, php,mysql server using so much memory

    - by kb2tfa
    i'm not sure where the problem lies. I have: centos 6 mysql php php-fpm wordpress (1 site). this is a dedicated server i'm learning on. as soon as i ran the web url the memory slammed to 125% of a 512k server, i had to upgrade to 1gig, so i'm not sure where the problem lies. I thought by switching to nginx from apache i would have more memory free, but i'm still stuck with the problem. before launching the site with nginx and mysqld running the site was about 5% memory. I reanamed my "my-small.cnf" to my.cnf and put in my /etc folder where the original was, but that seems not to have done it. after looking at my TOP results, i'm starting to think it may be php-fpm eating my memory, but not sure. is php-fpm the preferend way or is there something better to use. I read about possible memory leaks in php-fpm. here is what i have: php-fpm.conf ;;;;;;;;;;;;;;;;;;;;; ; FPM Configuration ; ;;;;;;;;;;;;;;;;;;;;; ; All relative paths in this configuration file are relative to PHP's install ; prefix. ; Include one or more files. If glob(3) exists, it is used to include a bunch of ; files from a glob(3) pattern. This directive can be used everywhere in the ; file. include=/etc/php-fpm.d/*.conf ;;;;;;;;;;;;;;;;;; ; Global Options ; ;;;;;;;;;;;;;;;;;; [global] ; Pid file ; Default Value: none pid = /var/run/php-fpm/php-fpm.pid ; Error log file ; Default Value: /var/log/php-fpm.log error_log = /var/log/php-fpm/error.log ; Log level ; Possible Values: alert, error, warning, notice, debug ; Default Value: notice ;log_level = notice ; If this number of child processes exit with SIGSEGV or SIGBUS within the time ; interval set by emergency_restart_interval then FPM will restart. A value ; of '0' means 'Off'. ; Default Value: 0 ;emergency_restart_threshold = 0 ; Interval of time used by emergency_restart_interval to determine when ; a graceful restart will be initiated. This can be useful to work around ; accidental corruptions in an accelerator's shared memory. ; Available Units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;emergency_restart_interval = 0 ; Time limit for child processes to wait for a reaction on signals from master. ; Available units: s(econds), m(inutes), h(ours), or d(ays) ; Default Unit: seconds ; Default Value: 0 ;process_control_timeout = 0 ; Send FPM to background. Set to 'no' to keep FPM in foreground for debugging. ; Default Value: yes ;daemonize = yes ;;;;;;;;;;;;;;;;;;;; ; Pool Definitions ; ;;;;;;;;;;;;;;;;;;;; ; See /etc/php-fpm.d/*.conf end php-fpm.conf

    Read the article

  • Static file download from browser breaking in varnish but works fine in Apache

    - by Ron
    I would at first like to thank everyone at serverfault for this great website and I also come to this site while searching in google for various server related issues and setups. I also have an issue today and so I am posting here and hope that the seniors would help me out. I had setup a website on a dedicated server a few days ago and I used Varnish 3 as the frontend to Apache2 on a Debian Lenny server as the traffic was a bit high. There are several static file downloads of around 10-20 MB in size in the website. The website looked fine in the last few days after I setup. I was checking from a 5mbps + broadband connection and the file downloads were also completed in seconds and working fine. But today I realized that on a slow internet connection the file downloads were breaking off. When I tried to download the files from the website using a browser then it broke off after a minute or so. It kept on happening again and again and so it had nothing to do with the internet connection. The internet connection was around 512 kbps and so it was not dial up level speed too but decent speed where files should easily download though not that fast. Then I thought of trying out with the apache backend port and used the port number to check out if the problem occurs. But then on adding the apache port in the static file download url, the files got downloaded easily and did not break even once. I tried it several times to make sure that it was not a coincidence but every time I was using the apache port in the file download url then it was downloading fine while it was breaking each time with the normal link which was routed through Varnish I suppose. So, it seems Varnish has somehow resulted in the broken file downloads. Could anyone give any idea as to why it is happening and how to fix the problem. For more clarification, take this example: Apache backend set on port 8008, Varnish frontend set on port 80 Now when I download say http://mywebsite.com/directory/filename.extension Then the download breaks off after a minute or so. I cannot be sure it is due to the time or size though and I am just assuming. May be some other reason too. But when I download using: http://mywebsite.com:8008/directory/filename.extension Then the file download does not break at all and it gets download fine. So, it seems that varnish is somehow creating the file download breaking and not apache. Does anybody have any idea as to why it is happening and how can it be fixed. Any help would be highly appreciated. And my varnish default.vcl is backend apache { set backend.host = "127.0.0.1"; set backend.port = "8008"; } sub vcl_deliver { remove resp.http.X-Varnish; remove resp.http.Via; remove resp.http.Age; remove resp.http.Server; remove resp.http.X-Powered-By; }

    Read the article

  • need assistance with my.cnf - 1500% CPU usage

    - by Alan Long
    I'm running into a few issues with our new database server. It is a HP G8 with 2 INTEL XEON E5-2650 processors and 32GB of ram. This server is dedicated as a MySQL server (5.1.69) for our intranet portal. I have been having issues with this server staying alive - I notice high CPU usage during certain times of day (8% ~ 1500%+) and see very low memory usage (7 ~ 15%) based on using the 'top' command. When the CPU usage passes 1000%, that is when the app usually dies. I'm trying to see what I'm doing wrong with the config file, hopefully one of the experts can chime in and let me know what they think. See below for my.cnf file: [mysqld] default-storage-engine=InnoDB datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock #user=mysql large-pages # Disabling symbolic-links is recommended to prevent assorted security risks symbolic-links=0 max_connections=275 tmp_table_size=1G key_buffer_size=384M key_buffer=384M thread_cache_size=1024 long_query_time=5 low_priority_updates=1 max_heap_table_size=1G myisam_sort_buffer_size=8M concurrent_insert=2 table_cache=1024 sort_buffer_size=8M read_buffer_size=5M read_rnd_buffer_size=6M join_buffer_size=16M table_definition_cache=6k open_files_limit=8k slow_query_log #skip-name-resolve # Innodb Settings innodb_buffer_pool_size=18G innodb_thread_concurrency=0 innodb_log_file_size=1G innodb_log_buffer_size=16M innodb_flush_log_at_trx_commit=2 innodb_lock_wait_timeout=50 innodb_file_per_table #innodb_buffer_pool_instances=4 #eliminating double buffering innodb_flush_method = O_DIRECT flush_time=86400 innodb_additional_mem_pool_size=40M #innodb_io_capacity = 5000 #innodb_read_io_threads = 64 #innodb_write_io_threads = 64 # increase until threads_created doesnt grow anymore thread_cache=1024 query_cache_type=1 query_cache_limit=4M query_cache_size=256M # Try number of CPU's*2 for thread_concurrency thread_concurrency = 0 wait_timeout = 1800 connect_timeout = 10 interactive_timeout = 60 [mysqldump] max_allowed_packet=32M [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid log-slow-queries=/var/log/mysql/slow-queries.log long_query_time = 1 log-queries-not-using-indexes we connect to one database with 75 tables, the largest table has 1,150,000 entries and the second largest has 128,036 entries. I have also verified that our PHP queries are optimized as best as possible. Reference - MySQLtuner: >> MySQLTuner 1.2.0 - Major Hayden <[email protected]> >> Bug reports, feature requests, and downloads at http://mysqltuner.com/ >> Run with '--help' for additional options and output filtering -------- General Statistics -------------------------------------------------- [--] Skipped version check for MySQLTuner script [OK] Currently running supported MySQL version 5.1.69-log [OK] Operating on 64-bit architecture -------- Storage Engine Statistics ------------------------------------------- [--] Status: -Archive -BDB -Federated +InnoDB -ISAM -NDBCluster [--] Data in InnoDB tables: 420M (Tables: 75) [!!] Total fragmented tables: 75 -------- Security Recommendations ------------------------------------------- [!!] User '[email protected]' has no password set. -------- Performance Metrics ------------------------------------------------- [--] Up for: 1h 14m 50s (8M q [1K qps], 705 conn, TX: 6B, RX: 892M) [--] Reads / Writes: 68% / 32% [--] Total buffers: 19.7G global + 35.2M per thread (275 max threads) [!!] Maximum possible memory usage: 29.1G (93% of installed RAM) [OK] Slow queries: 0% (472/8M) [OK] Highest usage of available connections: 66% (183/275) [OK] Key buffer size / total MyISAM indexes: 384.0M/91.0K [OK] Key buffer hit rate: 100.0% (173 cached / 0 reads) [OK] Query cache efficiency: 96.2% (7M cached / 7M selects) [!!] Query cache prunes per day: 553614 [OK] Sorts requiring temporary tables: 0% (3 temp sorts / 1K sorts) [!!] Temporary tables created on disk: 49% (3K on disk / 7K total) [OK] Thread cache hit rate: 74% (183 created / 705 connections) [OK] Table cache hit rate: 97% (231 open / 238 opened) [OK] Open file limit used: 0% (17/8K) [OK] Table locks acquired immediately: 100% (432K immediate / 432K locks) [OK] InnoDB data size / buffer pool: 420.9M/18.0G -------- Recommendations ----------------------------------------------------- General recommendations: Run OPTIMIZE TABLE to defragment tables for better performance MySQL started within last 24 hours - recommendations may be inaccurate Reduce your overall MySQL memory footprint for system stability Increasing the query_cache size over 128M may reduce performance Temporary table size is already large - reduce result set size Reduce your SELECT DISTINCT queries without LIMIT clauses Variables to adjust: *** MySQL's maximum memory usage is dangerously high *** *** Add RAM before increasing MySQL buffer variables *** query_cache_size (> 256M) [see warning above] Thanks in advanced for your help!

    Read the article

  • How to use iptables to forward all data from an IP to a Virtual Machine

    - by jro
    OK, in an attempt to get some response, a TL;DR version. I know that the following command: iptables -A PREROUTING -t nat -i eth0 --dport 80 --source 1.1.1.1 -j REDIRECT --to-port 8080 ... will redirect all traffic from port 80 to port 8080. The problem is that I have to do this for every port that is to be redirected. To be future-proof, I want all ports for an IP to be redirected to a different (internal) IP, so that if one might decide to enable SSH, they can directly connect without worrying about iptables. What is needed to reliable forward all traffic from an external IP, to an internal IP, and vice versa? Extended version I've scoured the internet for this, but I never got a solid answer. What I have is one physical server (HOST), with several virtual machines (VM) that need traffic redirected to them. Just getting it to work with a single machine is enough for now. The VM's run under VirtualBox, and are set to use a host-only adapter (vboxnet0). Everything seems to work, but it is greatly lagging. Both the host (CentOS 5.6) and the guest (Ubuntu 10.04) machine are running Linux. What I did was the following: Configure the VM to have a static IP in the network of the vboxnet0 adapter. Add an IP alias to the host, registering to the dedicated (outside) IP. Setup iptables to allow traffic to come through (via sysctl). Configure iptables to DNAT and SNAT data from a given IP address to the internal address. iptables commands: sudo iptables -A FORWARD -m conntrack --ctstate ESTABLISHED,RELATED -j ACCEPT sudo iptables -A POSTROUTING -t nat -j MASQUERADE iptables -t nat -I PREROUTING -d $OUT_IP -I eth0 -j DNAT --to-destination $IN_IP iptables -t nat -I POSTROUTING -s $IN_IP -o eth0 -j SNAT --to-source $OUT_IP Now the site works, but is really, really slow. I'm hoping I missed something simple, but I'm out of ideas for now. Some background info: before this, the site was working with basic port forwarding. E.g. port 80 was mapped to port 8080 using iptables. In VirtualBox (having the network adapter configured as NAT), a port forwarding the other way around made things work beautifully. The problem was twofold: first, multiple ports needed to be forwarded (for admin interfaces, https, ssh, etc). Second, it only allowed one IP address to use port 80. To resolve things, multiple external IP addresses are used for different (sub)domains. Likewise, the "VirtualBox" network will contain the virtual machines: DNS Ext. IP Adapter VM "VirtalBox" IP ------------------------------------------------------------------ a.example.com 1.1.1.1 eth0:1 vm_guest_1 192.168.56.1 b.example.com 2.2.2.2 eth0:2 vm_guest_2 192.168.56.2 c.example.com 3.3.3.3 eth0:3 vm_guest_3 192.168.56.3 And so on. Put simply, the goal is to channel all traffic from a.example.com to vm_guest_1 (of put differently, from 1.1.1.1 to 192.168.56.1). And achieve this with an acceptable speed :).

    Read the article

  • Hoster not fulfilling contract: how to get money back?

    - by plua
    For several years, we have as a small webdesign company rented a dedicated server at a large hosting provider. They had several support levels. When we signed up for this, we had very limited in-house knowledge about server maintenance, and were very worried about the security of our server. We therefore took one of the more expensive support packages. An important aspect in this were these claims: [PROVIDER] verifies the availability of the latest security updates and sends you a notification to see if you are interested to have them installed [PROVIDER] verifies the availability of the latest supported software updates and sends you a notification to see if you are interested to have them installed These items were clearly stated on their website as being part of the advantage of this package.; With not enough knowledge about installing and updating such software on a Linux server, we decided to go for this package. We paid a premium of $50 per month over the maintenance package that is next in line ($100 vs $50). Over the years, we have paid several thousand dollars for this service. Then came the moment that I learned more and more about server management. And I found out step by step that our server was horrendously outdated! We had an OS that was hardly updated, our anti-virus was not working because it needed certain more recent packages on the OS, and in general there were a whole bunch of security vulnerabilities and fixes that were lacking. Shocked, I wrote the provider. Turns out, they decided unilaterally that they would not send out any notifications to clients because clients would get too many e-mails. This is a quote from their explanation: [...] We have decided not to spam its clients with OS and security updates and only install them whenever asked by the client I was shocked! They had never mentioned that they would drop this service, and in fact the claims about updating their clients through e-mail was still on their website, after they apparently stopped doing this years ago! Upon finding this out, I requested they refund all that we have paid as a premium over the other package, and make it available as future credit with their own company. I thought this was a very reasonable request. However, they said they would only go back one year and provide credit for this one year. Mails went back and forth, but they were not willing to give credit for the whole period, which I felt I was entitled to. So ultimately I left the hosting company, and filed a complaint with the BBB a while ago. Now, I am not the kind of person who runs to a lawyer for any minor thing, but in this case I am really considering taking action. I have been paying for years for a service I did not receive (the premium package had a few other pluses, but we took it primarily for these two points, and I can prove that we did not use the other benefits). For our small company the hosting costs were a very large part of our budget, and I feel it is very unfair how this large provider just does not care about not fulfilling its obligations. So my question is: what action should I take? Is a lawyer the only next step, or are there other suggestions? And am I right here to claim this money, or are they right that there is some sort of statue of limitations on such claims? Any feedback is appreciated.

    Read the article

  • Multi-tenant ASP.NET MVC – Introduction

    - by zowens
    I’ve read a few different blogs that talk about multi-tenancy and how to resolve some of the issues surrounding multi-tenancy. What I’ve come to realize is that these implementations overcomplicate the issues and give only a muddy implementation! I’ve seen some really illogical code out there. I have recently been building a multi-tenancy framework for internal use at eagleenvision.net. Through this process, I’ve realized a few different techniques to make building multi-tenant applications actually quite easy. I will be posting a few different entries over the issue and my personal implementation. In this first post, I will discuss what multi-tenancy means and how my implementation will be structured.   So what’s the problem? Here’s the deal. Multi-tenancy is basically a technique of code-reuse of web application code. A multi-tenant application is an application that runs a single instance for multiple clients. Here the “client” is different URL bindings on IIS using ASP.NET MVC. The problem with different instances of the, essentially, same application is that you have to spin up different instances of ASP.NET. As the number of running instances of ASP.NET grows, so does the memory footprint of IIS. Stack Exchange shifted its architecture to multi-tenancy March. As the blog post explains, multi-tenancy saves cost in terms of memory utilization and physical disc storage. If you use the same code base for many applications, multi-tenancy just makes sense. You’ll reduce the amount of work it takes to synchronize the site implementations and you’ll thank your lucky stars later for choosing to use one application for multiple sites. Multi-tenancy allows the freedom of extensibility while relying on some pre-built code.   You’d think this would be simple. I have actually seen a real lack of reference material on the subject in terms of ASP.NET MVC. This is somewhat surprising given the number of users of ASP.NET MVC. However, I will certainly fill the void ;). Implementing a multi-tenant application takes a little thinking. It’s not straight-forward because the possibilities of implementation are endless. I have yet to see a great implementation of a multi-tenant MVC application. The only one that comes close to what I have in mind is Rob Ashton’s implementation (all the entries are listed on this page). There’s some really nasty code in there… something I’d really like to avoid. He has also written a library (MvcEx) that attempts to aid multi-tenant development. This code is even worse, in my honest opinion. Once I start seeing Reflection.Emit, I have to assume the worst :) In all seriousness, if his implementation makes sense to you, use it! It’s a fine implementation that should be given a look. At least look at the code. I will reference MvcEx going forward as a comparison to my implementation. I will explain why my approach differs from MvcEx and how it is better or worse (hopefully better).   Core Goals of my Multi-Tenant Implementation The first, and foremost, goal is to use Inversion of Control containers to my advantage. As you will see throughout this series, I pass around containers quite frequently and rely on their use heavily. I will be using StructureMap in my implementation. However, you could probably use your favorite IoC tool instead. <RANT> However, please don’t be stupid and abstract your IoC tool. Each IoC is powerful and by abstracting the capabilities, you’re doing yourself a real disservice. Who in the world swaps out IoC tools…? No one!</RANT> (It had to be said.) I will outline some of the goodness of StructureMap as we go along. This is really an invaluable tool in my tool belt and simple to use in my multi-tenant implementation. The second core goal is to represent a tenant as easily as possible. Just as a dependency container will be a first-class citizen, so will a tenant. This allows us to easily extend and use tenants. This will also allow different ways of “plugging in” tenants into your application. In my implementation, there will be a single dependency container for a single tenant. This will enable isolation of the dependencies of the tenant. The third goal is to use composition as a means to delegate “core” functions out to the tenant. More on this later.   Features In MvcExt, “Modules” are a code element of the infrastructure. I have simplified this concept and have named this “Features”. A feature is a simple element of an application. Controllers can be specified to have a feature and actions can have “sub features”. Each tenant can select features it needs and the other features will be hidden to the tenant’s users. My implementation doesn’t require something to be a feature. A controller can be common to all tenants. For example, (as you will see) I have a “Content” controller that will return the CSS, Javascript and Images for a tenant. This is common logic to all tenants and shouldn’t be hidden or considered a “feature”; Content is a core component.   Up next My next post will be all about the code. I will reveal some of the foundation to the way I do multi-tenancy. I will have posts dedicated to Foundation, Controllers, Views, Caching, Content and how to setup the tenants. Each post will be in-depth about the issues and implementation details, while adhering to my core goals outlined in this post. As always, comment with questions of DM me on twitter or send me an email.

    Read the article

  • Creating an AJAX Accordion Menu

    - by jaullo
    Introduction Ajax is a powerful addition to asp.net that provides new functionality in a simple and agile  way This post is dedicated to creating a menu with ajax accordion type. About the Control The basic idea of this control, is to provide a serie of panels and show and hide information inside these panels. The use is very simple, we have to set each panel inside accordion control and give to each panel a Header and of course, we have to set the content of each panel.  To use accordion control, u need the ajax control toolkit. know the basic propertyes of accordion control:  Before start developing an accordion control, we have to know the basic properties for this control Other accordion propertyes  FramesPerSecond - Number of frames per second used in the transition animations RequireOpenedPane - Prevent closing the currently opened pane when its header is clicked (which ensures one pane is always open). The default value is true. SuppressHeaderPostbacks - Prevent the client-side click handlers of elements inside a header from firing (this is especially useful when you want to include hyperlinks in your headers for accessibility) DataSource - The data source to use. DataBind() must be called. DataSourceID - The ID of the data source to use. DataMember - The member to bind to when using a DataSourceID  AJAX Accordion Control Extender DataSource  The Accordion Control extender of AJAX Control toolkit can also be used as DataBound control. You can bind the data retrieved from the database to the Accordion control. Accordion Control consists of properties such as DataSource and DataSourceID (we can se it above) that can be used to bind the data. HeaderTemplate can used to display the header or title for the pane generated by the Accordion control, a click on which will open or close the ContentTemplate generated by binding the data with Accordion extender. When DataSource is passed to the Accordion control, also use the DataBind method to bind the data. The Accordion control bound with data auto generates the expand/collapse panes along with their headers.  This code represents the basic steps to bind the Accordion to a Datasource Collapse Public Sub getCategories() Dim sqlConn As New SqlConnection(conString) sqlConn.Open() Dim sqlSelect As New SqlCommand("SELECT * FROM Categories", sqlConn) sqlSelect.CommandType = System.Data.CommandType.Text Dim sqlAdapter As New SqlDataAdapter(sqlSelect) Dim myDataset As New DataSet() sqlAdapter.Fill(myDataset) sqlConn.Close() Accordion1.DataSource = myDataset.Tables(0).DefaultView Accordion1.DataBind()End Sub Protected Sub Accordion1_ItemDataBound(sender As Object, _ e As AjaxControlToolkit.AccordionItemEventArgs) If e.ItemType = AjaxControlToolkit.AccordionItemType.Content Then Dim sqlConn As New SqlConnection(conString) sqlConn.Open() Dim sqlSelect As New SqlCommand("SELECT productName " & _ "FROM Products where categoryID = '" + _ DirectCast(e.AccordionItem.FindControl("txt_categoryID"),_ HiddenField).Value + "'", sqlConn) sqlSelect.CommandType = System.Data.CommandType.Text Dim sqlAdapter As New SqlDataAdapter(sqlSelect) Dim myDataset As New DataSet() sqlAdapter.Fill(myDataset) sqlConn.Close() Dim grd As New GridView() grd = DirectCast(e.AccordionItem.FindControl("GridView1"), GridView) grd.DataSource = myDataset grd.DataBind() End If End Sub In the above code, we made two things, first, we made a sql select to database to retrieve all data from categories table, this data will be used to set the header and columns of the accordion.  Collapse <asp:ScriptManager ID="ScriptManager1" runat="server"> </asp:ScriptManager> <ajaxToolkit:Accordion ID="Accordion1" runat="server" TransitionDuration="100" FramesPerSecond="200" FadeTransitions="true" RequireOpenedPane="false" OnItemDataBound="Accordion1_ItemDataBound" ContentCssClass="acc-content" HeaderCssClass="acc-header" HeaderSelectedCssClass="acc-selected"> <HeaderTemplate> <%#DataBinder.Eval(Container.DataItem,"categoryName") %> </HeaderTemplate> <ContentTemplate> <asp:HiddenField ID="txt_categoryID" runat="server" Value='<%#DataBinder.Eval(Container.DataItem,"categoryID") %>' /> <asp:GridView ID="GridView1" runat="server" RowStyle-BackColor="#ededed" RowStyle-HorizontalAlign="Left" AutoGenerateColumns="false" GridLines="None" CellPadding="2" CellSpacing="2" Width="300px"> <Columns> <asp:TemplateField HeaderStyle-HorizontalAlign="Left" HeaderText="Product Name" HeaderStyle-BackColor="#d1d1d1" HeaderStyle-ForeColor="#777777"> <ItemTemplate> <%#DataBinder.Eval(Container.DataItem,"productName") %> </ItemTemplate> </asp:TemplateField> </Columns> </asp:GridView> </ContentTemplate> </ajaxToolkit:Accordion>  Here, we use <%#DataBinder.Eval(Container.DataItem,"categoryName") %> to bind accordion header with categoryName, so we made on header for each element found on database.    Creating a basic accordion control As we know, to use any of the ajax components, there must be a registered ScriptManager on our site, which will be responsible for managing our controls. So the first thing we will do is create our script manager.     Collapse <asp:ScriptManager ID="ScriptManager1" runat="server"></asp:ScriptManager> Then we define our accordion  element and establish some basic properties:    Collapse <cc1:Accordion ID="AccordionCtrl" runat="server" SelectedIndex="0" HeaderCssClass="accordionHeader" ContentCssClass="accordionContent" AutoSize="None" FadeTransitions="true" TransitionDuration="250" FramesPerSecond="40" For our work we must declare PANES accordion inside it, these breads will be responsible for contain information, links or information that we want to show.  Collapse <Panes> <cc1:AccordionPane ID="AccordionPane0" runat="server"> <Header>Matenimiento</Header> <Content> <li><a href="mypagina.aspx">My página de prueba</a></li> </Content> </cc1:AccordionPane> To end this work, we have to close all panels and our accordion Collapse </Panes> </cc1:Accordion> Finally complete our example should look like:  Collapse <asp:ScriptManager ID="ScriptManager1" runat="server"></asp:ScriptManager> <cc1:Accordion ID="AccordionCtrl" runat="server" SelectedIndex="0" HeaderCssClass="accordionHeader" ContentCssClass="accordionContent" AutoSize="None" FadeTransitions="true" TransitionDuration="250" FramesPerSecond="40"> <Panes> <cc1:AccordionPane ID="AccordionPane0" runat="server"> <Header>Matenimiento</Header> <Content> <li><a href="mypagina.aspx">My página de prueba</a></li> </Content> </cc1:AccordionPane> </Panes> </cc1:Accordion>

    Read the article

  • Install Ubuntu Netbook Edition with Wubi Installer

    - by Matthew Guay
    Ubuntu is one of the most popular versions of Linux, and their Netbook Remix edition is especially attractive for netbook owners.  Here we’ll look at how you can easily try out Ubuntu on your netbook without a CD/DVD drive. Netbooks, along with the growing number of thin, full powered laptops, lack a CD/DVD drive.  Installing software isn’t much of a problem since most programs, whether free or for-pay, are available for download.  Operating systems, however, are usually installed from a disk.  You can easily install Windows 7 from a flash drive with our tutorial, but installing Ubuntu from a USB flash drive is more complicated.  However, using Wubi, a Windows installer for Ubuntu, you can easily install it directly on your netbook and even uninstall it with only a few clicks. Getting Started Download and run the Wubi installer for Ubuntu (link below).  In the installer, select the drive you where you wish to install Ubuntu, the size of the installation (this is the amount dedicated to Ubuntu; under 20Gb should be fine), language, username, and desired password.  Also, from the Desktop environment menu, select Ubuntu Netbook to install the netbook edition.  Click Install when your settings are correct. Wubi will automatically download the selected version of Ubuntu and install it on your computer. Windows Firewall may ask if you want to unblock Wubi; select your network and click Allow access. The download will take around an hour on broadband, depending on your internet connection speed.  Once the download is completed, it will automatically install to your computer.  If you’d prefer to have everything downloaded before you start the install, download the ISO of Ubuntu Netbook edition (link below) and save it in the same folder as Wubi. Then, when you run Wubi, select the netbook edition as before and click Install.  Wubi will verify that your download is valid, and will then proceed to install from the downloaded ISO.  This install will only take about 10 minutes. Once the install is finished you will be asked to reboot your computer.  Save anything else you’re working on, and then reboot to finish setting up Ubuntu on your netbook. When your computer reboots, select Ubuntu at the boot screen.  Wubi leaves the default OS as Windows 7, so if you don’t select anything it will boot into Windows 7 after a few seconds. Ubuntu will automatically finish the install when you boot into it the first time.  This took about 12 minutes in our test. When the setup is finished, your netbook will reboot one more time.  Remember again to select Ubuntu at the boot screen.  You’ll then see a second boot screen; press your Enter key to select the default.   Ubuntu only took less than a minute to boot in our test.  When you see the login screen, select your name and enter your password you setup in Wubi.  Now you’re ready to start exploring Ubuntu Netbook Remix. Using Ubuntu Netbook Remix Ubuntu Netbook Remix offers a simple, full-screen interface to take the best advantage of netbooks’ small screens.  Pre-installed applications are displayed in the application launcher, and are organized by category.  Click once to open an application. The first screen on the application launcher shows your favorite programs.  If you’d like to add another application to the favorites pane, click the plus sign beside its icon. Your files from Windows are still accessible from Ubuntu Netbook Remix.  From the home screen, select Files & Folders on the left menu, and then click the icon that says something like 100GB Filesystem under the Volumes section. Now you’ll be able to see all of your files from Windows.  Your user files such as documents, music, and pictures should be located in Documents and Settings in a folder with your user name. You can also easily install a variety of free applications via the Software Installer. Connecting to the internet is also easy, as Ubuntu Netbook Remix automatically recognized the WiFi adaptor on our test netbook, a Samsung N150.  To connect to a wireless network, click the wireless icon on the top right of the screen and select the network’s name from the list. And, if you’d like to customize your screen, right-click on the application launcher and select Change desktop background. Choose a background picture you’d like. Now you’ll see it through your application launcher.  Nice! Most applications are opened full-screen.  You can close them by clicking the x on the right of the program’s name. You can also switch to other applications from their icons on the top left.  Open the home screen by clicking the Ubuntu logo in the far left. Changing Boot Options By default, Wubi will leave Windows as the default operating system, and will give you 10 seconds at boot to choose to boot into Ubuntu.  To change this, boot into Windows and enter Advanced system settings in your start menu search. In this dialog, click Settings under Startup and Recovery. From this dialog, you can select the default operating system and the time to display list of operating systems.  You can enter a lower number to make the boot screen appear for less time. And if you’d rather make Ubuntu the default operating system, select it from the drop-down list.   Uninstalling Ubuntu Netbook Remix If you decide you don’t want to keep Ubuntu Netbook Remix on your computer, you can uninstall it just like you uninstall any normal application.  Boot your computer into Windows, open Control Panel, click Uninstall a Program, and enter ubuntu in the search box.  Select it, and click Uninstall. Click Uninstall at the prompt.  Ubuntu uninstalls very quickly, and removes the entry from the bootloader as well, so your computer is just like it was before you installed it.   Conclusion Ubuntu Netbook Remix offers an attractive Linux interface for netbooks.  We enjoyed trying it out, and found it much more user-friendly than most Linux distros.  And with the Wubi installer, you can install it risk-free and try it out on your netbook.  Or, if you’d like to try out another alternate netbook operating system, check out our article on Jolicloud, another new OS for netbooks. Links Download Wubi Installer for Windows Download Ubuntu Netbook Edition Similar Articles Productive Geek Tips Easily Install Ubuntu Linux with Windows Using the Wubi InstallerInstall VMware Tools on Ubuntu Edgy EftHow to install Spotify in Ubuntu 9.10 using WineInstalling PHP5 and Apache on UbuntuInstalling PHP4 and Apache on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics

    Read the article

  • SQLAuthority News – Pluralsight Course Review – Practices for Software Startups – Part 1 of 2

    - by pinaldave
    This is first part of the two part series of Practices for Software Startup Pluralsight Course. The course is written by Stephen Forte (Blog | Twitter). Stephen Forte is the Chief Strategy Officer of the venture backed company, Telerik, a leading vendor of developer and team productivity tools. Stephen is also a Certified Scrum Master, Certified Scrum Professional, PMP, and also speaks regularly at industry conferences around the world. He has written several books on application and database development.  Stephen is also a board member of the Scrum Alliance. Startups – Everybodies Dream Start-up companies are an important topic right now – everyone wants to start their own business.  It is also important to remember that all companies were a start up at one point – from your corner store to the giants like Microsoft and Apple.  Research proves that not every start-up succeeds, in fact, most will fail before their first year.  There are many reasons for this, and this could be due to the fact that there are many stages to a start-up company, and stumbling at any of these stages can lead to failure.  It is important to understand what makes a start-up company succeed at all its hurdles to become successful.  It is even important to define success.  For most start-ups this would mean becoming their own independently functioning company or to be bought out for a hefty profit by a larger company.  The idea of making a hefty profit by living your dream is extremely important, and you can even think of start-ups as the new craze.  That’s why studying them is so important – they are very popular, but things have changed a lot since their inception. Starting the Startups Beginning a start-up company used to be difficult, but now facilities and information is widely available, and it is much easier.  But that means it is much easier to fail, also.  Previously to start your own company, everything was planned and organized, resources were ensured and backed up before beginning; even the idea of starting your own business was a big thing.  Now anybody can do it, and the steps are simple and outlines everywhere – you can get online software and easily outsource , cloud source, or crowdsource a lot of your material.  But without the type of planning previously required, things can often go badly. New Products – New Ideas – New World There are so many fantastic new products, but they don’t reach success all the time.  I find start-up companies very interesting, and whenever I meet someone who is interested in the subject or already starting their own company, I always ask what they are doing, their plans, goals, market, etc.  I am sorry to say that in most cases, they cannot answer my questions.  It is true that many fantastic ideas fail because of bad decisions.  These bad decisions were not made intentionally, but people were simply unaware of what they should be doing.  This will always lead to failure.  But I am happy to say that all these issues can be gone because Pluralsight is now offering a course all about start-ups by Stephen Forte.  Stephen is a start up leader.  He has successfully started many companies and most are still going strong, or have gone on to even bigger and better things. Beginning Course on Startup I have always thought start-ups are a fascinating subject, and decided to take his course, but it is three hours long.  This would be hard to fit into my busy work day all at once, so I decided to do half of his course before my daughter wakes up, and the other half after she goes to sleep.  The course is divided into six modules, so this would be easy to do.  I began the first chapter early in the morning, at 5 am.  Stephen jumped right into the middle of the subject in the very first module – designing your business plan.  The first question you will have to answer to yourself, to others, and to investors is: What is your product and when will we be able to see it?  So a very important concept is a “minimal viable product.”  This means setting goals for yourself and your product.  We all have large dreams, but your minimal viable product doesn’t have to be your final vision at the very first.  For example: Apple is a giant company, but it is still evolving.  Steve Jobs didn’t envision the iPhone 6 at the very beginning.  He had to start at the first iPhone and do his market research, and the idea evolved into the technology you see now.  So for yourself, you should decide a beginning and stop point.  Do your market research.  Determine who you want to reach, what audience you want for your product.  You can have a great idea that simply will not work in the market, do need, bottlenecks, lack of resources, or competition.  There is a lot of research that needs to be done before you even write a business plan, and Stephen covers it in the very first chapter. The Team – Unique Key to Success After jumping right into the subject in the very first module, I wondered what Stephen could have in store for me for the rest of the course.  Chapter number two is building a team.  Having a team is important regardless of what your startup is.  You can be a true visionary with endless ideas and energy, but one person can still not do everything.  It is important to decide from the very beginning if you will have cofounders, team leaders, and how many employees you’ll need.  Even more important, you’ll need to decide what kind of team you want – what personalities, skills, and type of energy you want each of your employees to bring.  Do you want to have an A+ team with a B- idea, or do you have a B- idea that needs an A+ team to sell it?  Stephen asks all the hard questions!  I was especially impressed by his insight on developing.  You have to decide if you need developers, how many, and what their skills should be. I found this insight extremely useful for everyday usage, not just for start-up companies.  I would apply this kind of information in management at any position.  An amazing team will build an amazing product – and that doesn’t matter if you’re a start-up company or a small team working for a much larger business. Customer Development – The Ultimate Obective Chapter three was about customer development. According to Stephen, there are four different steps to develop a customer base.  The first question to ask yourself is if you are envisioning a large customer base buying a few products each, or a small, dedicated base that buys a lot of your product – quantity vs. Quality.  He also discusses how to earn, retain, and get more customers.  He also says that each customer should be placed in a different role – some will be like investors, who regularly spend with you and invest their money in your business.  It is then your job to take that investment and turn it into a better product in the future.  You need to deal with their money properly – think of it is as theirs as investors, not yours as profit.  At the end of this module I felt that only Stephen could provide this kind of insight, and then he listed all the resources he took his information from.  I have never seen a group of people so passionate about their customers. It was indeed a long day for me. In tomorrow’s part 2 we will discuss rest of the three module and also will see a quick video of the Practices for Software Startup Pluralsight Course. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Best Practices, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • CodePlex Daily Summary for Sunday, September 30, 2012

    CodePlex Daily Summary for Sunday, September 30, 2012Popular ReleasesCAPTCHA Solver: Initial Release: This is the initial Release :) Still very much a WIP.MCEBuddy 2.x: MCEBuddy 2.2.17: Reccomended update to 2.2.16 Changelog for 2.2.17 (32bit and 64bit) 1. Fixed bugs around thread synchronization with new remote model (fixes cause the app to crash or hang) 2. Updated UPnP code base, faster and more reliable now 3. Now you can get audio/video properties for multiple files on main page. Selected multiple files and right click, all selected files properties will be shown. 4. Fix a bug, not able to enter a conversion task name in the GUIAggravation: Version 1.0: This version 1.0 release is pretty stable. You need the Silverlight 4 runtime, developer tools, and Experssion Blend 4 installed.Readable Passphrase Generator: KeePass Plugin 0.7.1: See the KeePass Plugin Step By Step Guide for instructions on how to install the plugin. Changes Built against KeePass 2.20Windows 8 Toolkit - Charts and More: Beta 1.0: The First Compiled Version of my LibraryPDF.NET: PDF.NET.Ver4.5-OpenSourceCode: PDF.NET Ver4.5 ????,????Web??????。 PDF.NET Ver4.5 Open Source Code,include a sample Web application project.D3 Loot Tracker: 1.4: Session name is displayed in the UI. Changes data directory for clickonce deployment so that sessions files are persisted between versions. Added a delete button in the sessions list window. Allow opening of the sessions local folder from the session list widow. Display the session name in the main window Ability to select which diablo process to hook up to when pressing new () function BUT only if multi-process support is selected in the generals settings tab menu. Session picker...CRM 2011 Visual Ribbon Editor: Visual Ribbon Editor 1.1 Beta: Visual Ribbon Editor 1.1 Beta What's New: Fixed scrolling issue in UnHide dialog Added support for connecting via ADFS / IFD Added support for more than one action for a button Added support for empty StringParameter for Javascript functions Fixed bug in rule CrmClientTypeRule when selecting Outlook option Extended Prefix field in New Button dialogVisual Studio Icon Patcher: Version 1.5.2: This version contains no new images from v1.5.1 Contains the following improvements: Better support for detecting the installed languages The extract & inject commands won’t run if Visual Studio is running You may now run in extract or inject mode The p/invoke code was cleaned up based on Code Analysis recommendations When a p/invoke method fails the Win32 error message is now displayed Error messages use red text Status messages use green textZXing.Net: ZXing.Net 0.9.0.0: On the way to a release 1.0 the API should be stable now with this version. sync with rev. 2393 of the java version improved api better Unity support Windows RT binaries Windows CE binaries new Windows Service demo new WPF demo WindowsCE Hotfix: Fixes an error with ISO8859-1 encoding and scannning of QR-Codes. The hotfix is only needed for the WindowsCE platform.C.B.R. : Comic Book Reader: CBR 0.7: Synthesis since 0.6 : ePUB : Complete refactoring Add a new dedicated feed viewer for opds stream PDF conversion : improved with image merge Make all backstage panel scrollable Integrate the new AvalonDock 2 library. Support multi-document. Library explorer and Table of content are now toolboxes Designer for dynamic books is now mvvm and much better New BrowserForControl Customized xps viewer to suppress toolbars and bind it to cbr commands Add quick start manual and button ...menu4web: menu4web 1.0 - free javascript menu for web sites: menu4web 1.0 has been tested with all major browsers: Firefox, Chrome, IE, Opera and Safari. Minified m4w.js library is less than 9K. Includes 21 menu examples of different styles. Can be freely distributed under The MIT License (MIT).Rawr: Rawr 5.0.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Coevery - Free CRM: Coevery 1.0.0.26: The zh-CN issue has been solved. We also add a project management module.VidCoder: 1.4.1 Beta: Updated to HandBrake 4971. This should fix some issues with stuck PGS subtitles. Fixed build break which prevented pre-compiled XML serializers from showing up. Fixed problem where a preset would get errantly marked as modified when re-opening the encode settings window or importing a new preset.Snake!: Snake 1.0: Version 1 StablePaging SharePoint ListItems using listitems position: Paginglistitems V1.0: This is a console application which has two methods both on CSOM and SOM to display the listitems in a paged manner.SharePoint Move Discussion Threads: SharePoint Move Discussion Threads ver 0.1: ver 0.1NTCPMSG: V1.1.1.0: increase the performance. Support .net framework 4.0.BlackJumboDog: Ver5.7.2: 2012.09.23 Ver5.7.2 (1)InetTest?? (2)HTTP?????????????????100???????????New Projects2D Sprite Editor: This is a 2d sprite editor. Import your sprite sheet, trace your animations frame and export the coordinates points in a simple txt file, ready to import.caifenweb1: test project.CatchThatException: This is a small logging library We created at developerpath.com to help us log exceptions. It write it to a text file and you can easilay open that txt.FsxWs - WebServices for Microsoft FSX: WebServices for MS Flight Simulator. Get flights data as JSON, KML. !! Still in SetUp phase - be patient !!GetTPB: Some training in downloading and parsing web pages, with multithreading too.JSON-RPC Client Generator (for XBMC): The goal of this project is to provide a .Net client for the XBMC JSONRPC API. The main part is not XBMC dependent and may be used for any JSON-RPC client.matlab-silhouette-pose-wtf: Whatevermfp: this is random codeMVC Grid: MVC Grid ExampleMyWebSocketTry: sssssssssssssssssssssssssssssssssssssssNetduino Console: Netduino Console is an interface with built in messaging layers that allows you as a developer to dynamically create plugins following a provided interface to iSharePoint ASP.NET Verifier: Project will allow to verify SharePoint 2010 components using ASP.NET web applicationSharepoint Custom Upload: This is a SharePoint solution that allows an administrator to customize the upload page individually for each document library in a site.. It allows you to makeWinWeb Browser Deluxe: WinWeb Browser Deluxe es un navegador web de código abierto basado en Internet Explorer hecho en Visual Basic .NET. Descargalo ya!writethatoutput: This is the official release page for WriteThatOutPut from developerpath.com

    Read the article

  • [GEEK SCHOOL] Network Security 4: Windows Firewall: Your System’s Best Defense

    - by Ciprian Rusen
    If you have your computer connected to a network, or directly to your Internet connection, then having a firewall is an absolute necessity. In this lesson we will discuss the Windows Firewall – one of the best security features available in Windows! The Windows Firewall made its debut in Windows XP. Prior to that, Windows system needed to rely on third-party solutions or dedicated hardware to protect them from network-based attacks. Over the years, Microsoft has done a great job with it and it is one of the best firewalls you will ever find for Windows operating systems. Seriously, it is so good that some commercial vendors have decided to piggyback on it! Let’s talk about what you will learn in this lesson. First, you will learn about what the Windows Firewall is, what it does, and how it works. Afterward, you will start to get your hands dirty and edit the list of apps, programs, and features that are allowed to communicate through the Windows Firewall depending on the type of network you are connected to. Moving on from there, you will learn how to add new apps or programs to the list of allowed items and how to remove the apps and programs that you want to block. Last but not least, you will learn how to enable or disable the Windows Firewall, for only one type of networks or for all network connections. By the end of this lesson, you should know enough about the Windows Firewall to use and manage it effectively. What is the Windows Firewall? Windows Firewall is an important security application that’s built into Windows. One of its roles is to block unauthorized access to your computer. The second role is to permit authorized data communications to and from your computer. Windows Firewall does these things with the help of rules and exceptions that are applied both to inbound and outbound traffic. They are applied depending on the type of network you are connected to and the location you have set for it in Windows, when connecting to the network. Based on your choice, the Windows Firewall automatically adjusts the rules and exceptions applied to that network. This makes the Windows Firewall a product that’s silent and easy to use. It bothers you only when it doesn’t have any rules and exceptions for what you are trying to do or what the programs running on your computer are trying to do. If you need a refresher on the concept of network locations, we recommend you to read our How-To Geek School class on Windows Networking. Another benefit of the Windows Firewall is that it is so tightly and nicely integrated into Windows and all its networking features, that some commercial vendors decided to piggyback onto it and use it in their security products. For example, products from companies like Trend Micro or F-Secure no longer provide their proprietary firewall modules but use the Windows Firewall instead. Except for a few wording differences, the Windows Firewall works the same in Windows 7 and Windows 8.x. The only notable difference is that in Windows 8.x you will see the word “app” being used instead of “program”. Where to Find the Windows Firewall By default, the Windows Firewall is turned on and you don’t need to do anything special in order for it work. You will see it displaying some prompts once in a while but they show up so rarely that you might forget that is even working. If you want to access it and configure the way it works, go to the Control Panel, then go to “System and Security” and select “Windows Firewall”. Now you will see the Windows Firewall window where you can get a quick glimpse on whether it is turned on and the type of network you are connected to: private networks or public network. For the network type that you are connected to, you will see additional information like: The state of the Windows Firewall How the Windows Firewall deals with incoming connections The active network When the Windows Firewall will notify you You can easily expand the other section and view the default settings that apply when connecting to networks of that type. If you have installed a third-party security application that also includes a firewall module, chances are that the Windows Firewall has been disabled, in order to avoid performance issues and conflicts between the two security products. If that is the case for your computer or device, you won’t be able to view any information in the Windows Firewall window and you won’t be able to configure the way it works. Instead, you will see a warning that says: “These settings are being managed by vendor application – Application Name”. In the screenshot below you can see an example of how this looks. How to Allow Desktop Applications Through the Windows Firewall Windows Firewall has a very comprehensive set of rules and most Windows programs that you install add their own exceptions to the Windows Firewall so that they receive network and Internet access. This means that you will see prompts from the Windows Firewall on occasion, generally when you install programs that do not add their own exceptions to the Windows Firewall’s list. In a Windows Firewall prompt, you are asked to select the network locations to which you allow access for that program: private networks or public networks. By default, Windows Firewall selects the checkbox that’s appropriate for the network you are currently using. You can decide to allow access for both types of network locations or just to one of them. To apply your setting press “Allow access”. If you want to block network access for that program, press “Cancel” and the program will be set as blocked for both network locations. At this step you should note that only administrators can set exceptions in the Windows Firewall. If you are using a standard account without administrator permissions, the programs that do not comply with the Windows Firewall rules and exceptions are automatically blocked, without any prompts being shown. You should note that in Windows 8.x you will never see any Windows Firewall prompts related to apps from the Windows Store. They are automatically given access to the network and the Internet based on the assumption that you are aware of the permissions they require based on the information displayed by the Windows Store. Windows Firewall rules and exceptions are automatically created for each app that you install from the Windows Store. However, you can easily block access to the network and the Internet for any app, using the instructions in the next section. How to Customize the Rules for Allowed Apps Windows Firewall allows any user with an administrator account to change the list of rules and exceptions applied for apps and desktop programs. In order to do this, first start the Windows Firewall. On the column on the left, click or tap “Allow an app or feature through Windows Firewall” (in Windows 8.x) or “Allow a program or feature through Windows Firewall” (in Windows 7). Now you see the list of apps and programs that are allowed to communicate through the Windows Firewall. At this point, the list is grayed out and you can only view which apps, features, and programs have rules that are enabled in the Windows Firewall.

    Read the article

  • I Hereby Resolve… (T-SQL Tuesday #14)

    - by smisner
    It’s time for another T-SQL Tuesday, hosted this month by Jen McCown (blog|twitter), on the topic of resolutions. Specifically, “what techie resolutions have you been pondering, and why?” I like that word – pondering – because I ponder a lot. And while there are many things that I do already because of my job, there are many more things that I ponder about doing…if only I had the time. Then I ponder about making time, but then it’s back to work! In 2010, I was moderately more successful in making time for things that I ponder about than I had been in years past, and I hope to continue that trend in 2011. If Jen hadn’t settled on this topic, I could keep my ponderings to myself and no one would ever know the outcome, but she’s egged me on (and everyone else that chooses to participate)! So here goes… For me, having resolve to do something means that I wouldn’t be doing that something as part of my ordinary routine. It takes extra effort to make time for it. It’s not something that I do once and check off a list, but something that I need to commit to over a period of time. So with that in mind, I hereby resolve… To Learn Something New… One of the things I love about my job is that I get to do a lot of things outside of my ordinary routine. It’s a veritable smorgasbord of opportunity! So what more could I possibly add to that list of things to do? Well, the more I learn, the more I realize I have so much more to learn. It would be much easier to remain in ignorant bliss, but I was born to learn. Constantly. (And apparently to teach, too– my father will tell you that as a small child, I had the neighborhood kids gathered together to play school – in the summer. I’m sure they loved that – but they did it!) These are some of things that I want to dedicate some time to learning this year: Spatial data. I have a good understanding of how maps in Reporting Services works, and I can cobble together a simple T-SQL spatial query, but I know I’m only scratching the surface here. Rob Farley (blog|twitter) posted interesting examples of combining maps and PivotViewer, and I think there’s so many more creative possibilities. I’ve always felt that pictures (including charts and maps) really help people get their minds wrapped around data better, and because a lot of data has a geographic aspect to it, I believe developing some expertise here will be beneficial to my work. PivotViewer. Not only is PivotViewer combined with maps a useful way to visualize data, but it’s an interesting way to work with data. If you haven’t seen it yet, check out this interactive demonstration using Netflx OData feed. According to Rob Farley, learning how to work with PivotViewer isn’t trivial. Just the type of challenge I like! Security. You’ve heard of the accidental DBA? Well, I am the accidental security person – is there a word for that role? My eyes used to glaze over when having to study about security, or  when reading anything about it. Then I had a problem long ago that no one could figure out – not even the vendor’s tech support – until I rolled up my sleeves and painstakingly worked through the myriad of potential problems to resolve a very thorny security issue. I learned a lot in the process, and have been able to share what I’ve learned with a lot of people. But I’m not convinced their eyes weren’t glazing over, too. I don’t take it personally – it’s just a very dry topic! So in addition to deepening my understanding about security, I want to find a way to make the subject as it relates to SQL Server and business intelligence more accessible and less boring. Well, there’s actually a lot more that I could put on this list, and a lot more things I have plans to do this coming year, but I run the risk of overcommitting myself. And then I wouldn’t have time… To Have Fun! My name is Stacia and I’m a workaholic. When I love what I do, it’s difficult to separate out the work time from the fun time. But there are some things that I’ve been meaning to do that aren’t related to business intelligence for which I really need to develop some resolve. And they are techie resolutions, too, in a roundabout sort of way! Photography. When my husband and I went on an extended camping trip in 2009 to Yellowstone and the Grand Tetons, I had a nice little digital camera that took decent pictures. But then I saw the gorgeous cameras that other tourists were toting around and decided I needed one too. So I bought a Nikon D90 and have started to learn to use it, but I’m definitely still in the beginning stages. I traveled so much in 2010 and worked on two book projects that I didn’t have a lot of free time to devote to it. I was very inspired by Kimberly Tripp’s (blog|twitter) and Paul Randal’s (blog|twitter) photo-adventure in Alaska, though, and plan to spend some dedicated time with my camera this year. (And hopefully before I move to Alaska – nothing set in stone yet, but we hope to move to a remote location – with Internet access – later this year!) Astronomy. I have this cool telescope, but it suffers the same fate as my camera. I have been gone too much and busy with other things that I haven’t had time to work with it. I’ll figure out how it works, and then so much time passes by that I forget how to use it. I have this crazy idea that I can actually put the camera and the telescope together for astrophotography, but I think I need to start simple by learning how to use each component individually. As long as I’m living in Las Vegas, I know I’ll have clear skies for nighttime viewing, but when we move to Alaska, we’ll be living in a rain forest. I have no idea what my opportunities will be like there – except I know that when the sky is clear, it will be far more amazing than anything I can see in Vegas – even out in the desert - because I’ll be so far away from city light pollution. I’ve been contemplating putting together a blog on these topics as I learn. As many of my fellow bloggers in the SQL Server community know, sometimes the best way to learn something is to sit down and write about it. I’m just stumped by coming up with a clever name for the new blog, which I was thinking about inaugurating with my move to Alaska. Except that I don’t know when that will be exactly, so we’ll just have to wait and see which comes first!

    Read the article

  • Win a place at a SQL Server Masterclass with Kimberly Tripp and Paul Randal

    - by Testas
    The top things YOU need to know about managing SQL Server - in one place, on one day - presented by two of the best SQL Server industry trainers!And you could be there courtesy of UK SQL Server User Group and SQL Server Magazine! This week the UK SQL Server User Group will provide you with details of how to win a place at this must see seminar   You can also register for the seminar yourself at:www.regonline.co.uk/kimtrippsql More information about the seminar   Where: Radisson Edwardian Heathrow Hotel, London When: Thursday 17th June 2010 This one-day MasterClass will focus on many of the top issues companies face when implementing and maintaining a SQL Server-based solution. In the case where a company has no dedicated DBA, IT managers sometimes struggle to keep the data tier performing well and the data available. This can be especially troublesome when the development team is unfamiliar with the affect application design choices have on database performance. The Microsoft SQL Server MasterClass 2010 is presented by Paul S. Randal and Kimberly L. Tripp, two of the most experienced and respected people in the SQL Server world. Together they have over 30 years combined experience working with SQL Server in the field, and on the SQL Server product team itself. This is a unique opportunity to hear them present at a UK event which will:·         Debunk many of the ingrained misconceptions around SQL Server's behaviour   ·         Show you disaster recovery techniques critical to preserving your company's life-blood - the data   ·         Explain how a common application design pattern can wreak havoc in the database ·         Walk through the top-10 points to follow around operations and maintenance for a well-performing and available data tier! Please Note: Agenda may be subject to changeSessions AbstractsKEYNOTE: Bridging the Gap Between Development and Production  Applications are commonly developed with little regard for how design choices will affect performance in production. This is often because developers don't realize the implications of their design on how SQL Server will be able to handle a high workload (e.g. blocking, fragmentation) and/or because there's no full-time trained DBA that can recognize production problems and help educate developers. The keynote sets the stage for the rest of the day. Discussing some of the issues that can arise, explaining how some can be avoided and highlighting some of the features in SQL 2008 that can help developers and DBAs make better use of SQL Server, and troubleshoot when things go wrong.  SESSION ONE: SQL Server MythbustersIt's amazing how many myths and misconceptions have sprung up and persisted over the years about SQL Server - after many years helping people out on forums, newsgroups, and customer engagements, Paul and Kimberly have heard it all. Are there really non-logged operations? Can interrupting shrinks or rebuilds cause corruption? Can you override the server's MAXDOP setting? Will the server always do a table-scan to get a row count? Many myths lead to poor design choices and inappropriate maintenance practices so these are just a few of many, many myths that Paul and Kimberly will debunk in this fast-paced session on how SQL Server operates and should be managed and maintained. SESSION TWO: Database Recovery Techniques Demo-Fest Even if a company has a disaster recovery strategy in place, they need to practice to make sure that the plan will work when a disaster does strike. In this fast-paced demo session Paul and Kimberly will repeatedly do nasty things to databases and then show how they are recovered - demonstrating many techniques that can be used in production for disaster recovery. Not for the faint-hearted! SESSION THREE: GUIDs: Use, Abuse, and How To Move Forward Since the addition of the GUID (Microsoft’s implementation of the UUID), my life as a consultant and "tuner" has been busy. I’ve seen databases designed with GUID keys run fairly well with small workloads but completely fall over and fail because they just cannot scale. And, I know why GUIDs are chosen - it simplifies the handling of parent/child rows in your batches so you can reduce round-trips or avoid dealing with identity values. And, yes, sometimes it's even for distributed databases and/or security that GUIDs are chosen. I'm not entirely against ever using a GUID but overusing and abusing GUIDs just has to be stopped! Please, please, please let me give you better solutions and explanations on how to deal with your parent/child rows, round-trips and clustering keys! SESSION 4: Essential Database MaintenanceIn this session, Paul and Kimberly will run you through their top-ten database maintenance recommendations, with a lot of tips and tricks along the way. These are distilled from almost 30 years combined experience working with SQL Server customers and are geared towards making your databases more performant, more available, and more easily managed (to save you time!). Everything in this session will be practical and applicable to a wide variety of databases. Topics covered include: backups, shrinks, fragmentation, statistics, and much more! Focus will be on 2005 but we'll explain some of the key differences for 2000 and 2008 as well.    Speaker Biographies     Paul S.Randal  Kimberley L. Tripp Paul and Kimberly are a husband-and-wife team who own and run SQLskills.com, a world-renowned SQL Server consulting and training company. They are both SQL Server MVPs and Microsoft Regional Directors, with over 30 years of combined experience on SQL Server. Paul worked on the SQL Server team for nine years in development and management roles, writing many of the DBCC commands, and ultimately with responsibility for core Storage Engine for SQL Server 2008. Paul writes extensively on his blog (SQLskills.com/blogs/Paul) and for TechNet Magazine, for which he is also a Contributing Editor. Kimberly worked on the SQL Server team in the early 1990s as a tester and writer before leaving to found SQLskills and embrace her passion for teaching and consulting. Kimberly has been a staple at worldwide conferences since she first presented at TechEd in 1996, and she blogs at SQLskills.com/blogs/Kimberly. They have written Microsoft whitepapers and books for SQL Server 2000, 2005 and 2008, and are regular, top-rated presenters worldwide on database maintenance, high availability, disaster recovery, performance tuning, and SQL Server internals. Together they teach the SQL MCM certification and throughout Microsoft.In their spare time, they like to find frogfish in remote corners of the world.  

    Read the article

  • Refreshing Your PC Won’t Help: Why Bloatware is Still a Problem on Windows 8

    - by Chris Hoffman
    Bloatware is still a big problem on new Windows 8 and 8.1 PCs. Some websites will tell you that you can easily get rid of manufacturer-installed bloatware with Windows 8′s Reset feature, but they’re generally wrong. This junk software often turns the process of powering on your new PC from what could be a delightful experience into a tedious slog, forcing you to spend hours cleaning up your new PC before you can enjoy it. Why Refreshing Your PC (Probably) Won’t Help Manufacturers install software along with Windows on their new PCs. In addition to hardware drivers that allow the PC’s hardware to work properly, they install more questionable things like trial antivirus software and other nagware. Much of this software runs at boot, cluttering the system tray and slowing down boot times, often dramatically. Software companies pay computer manufacturers to include this stuff. It’s installed to make the PC manufacturer money at the cost of making the Windows computer worse for actual users. Windows 8 includes “Refresh Your PC” and “Reset Your PC” features that allow Windows users to quickly get their computers back to a fresh state. It’s essentially a quick, streamlined way of reinstalling Windows.  If you install Windows 8 or 8.1 yourself, the Refresh operation will give your PC a clean Windows system without any additional third-party software. However, Microsoft allows computer manufacturers to customize their Refresh images. In other words, most computer manufacturers will build their drivers, bloatware, and other system customizations into the Refresh image. When you Refresh your computer, you’ll just get back to the factory-provided system complete with bloatware. It’s possible that some computer manufacturers aren’t building bloatware into their refresh images in this way. It’s also possible that, when Windows 8 came out, some computer manufacturer didn’t realize they could do this and that refreshing a new PC would strip the bloatware. However, on most Windows 8 and 8.1 PCs, you’ll probably see bloatware come back when you refresh your PC. It’s easy to understand how PC manufacturers do this. You can create your own Refresh images on Windows 8 and 8.1 with just a simple command, replacing Microsoft’s image with a customized one. Manufacturers can install their own refresh images in the same way. Microsoft doesn’t lock down the Refresh feature. Desktop Bloatware is Still Around, Even on Tablets! Not only is typical Windows desktop bloatware not gone, it has tagged along with Windows as it moves to new form factors. Every Windows tablet currently on the market — aside from Microsoft’s own Surface and Surface 2 tablets — runs on a standard Intel x86 chip. This means that every Windows 8 and 8.1 tablet you see in stores has a full desktop with the capability to run desktop software. Even if that tablet doesn’t come with a keyboard, it’s likely that the manufacturer has preinstalled bloatware on the tablet’s desktop. Yes, that means that your Windows tablet will be slower to boot and have less memory because junk and nagging software will be on its desktop and in its system tray. Microsoft considers tablets to be PCs, and PC manufacturers love installing their bloatware. If you pick up a Windows tablet, don’t be surprised if you have to deal with desktop bloatware on it. Microsoft Surfaces and Signature PCs Microsoft is now selling their own Surface PCs that they built themselves — they’re now a “devices and services” company after all, not a software company. One of the nice things about Microsoft’s Surface PCs is that they’re free of the typical bloatware. Microsoft won’t take money from Norton to include nagging software that worsens the experience. If you pick up a Surface device that provides Windows 8.1 and 8 as Microsoft intended it — or install a fresh Windows 8.1 or 8 system — you won’t see any bloatware. Microsoft is also continuing their Signature program. New PCs purchased from Microsoft’s official stores are considered “Signature PCs” and don’t have the typical bloatware. For example, the same laptop could be full of bloatware in a traditional computer store and clean, without the nasty bloatware when purchased from a Microsoft Store. Microsoft will also continue to charge you $99 if you want them to remove your computer’s bloatware for you — that’s the more questionable part of the Signature program. Windows 8 App Bloatware is an Improvement There’s a new type of bloatware on new Windows 8 systems, which is thankfully less harmful. This is bloatware in the form of included “Windows 8-style”, “Store-style”, or “Modern” apps in the new, tiled interface. For example, Amazon may pay a computer manufacturer to include the Amazon Kindle app from the Windows Store. (The manufacturer may also just receive a cut of book sales for including it. We’re not sure how the revenue sharing works — but it’s clear PC manufacturers are getting money from Amazon.) The manufacturer will then install the Amazon Kindle app from the Windows Store by default. This included software is technically some amount of clutter, but it doesn’t cause the problems older types of bloatware does. It won’t automatically load and delay your computer’s startup process, clutter your system tray, or take up memory while you’re using your computer. For this reason, a shift to including new-style apps as bloatware is a definite improvement over older styles of bloatware. Unfortunately, this type of bloatware has not replaced traditional desktop bloatware, and new Windows PCs will generally have both. Windows RT is Immune to Typical Bloatware, But… Microsoft’s Windows RT can’t run Microsoft desktop software, so it’s immune to traditional bloatware. Just as you can’t install your own desktop programs on it, the Windows RT device’s manufacturer can’t install their own desktop bloatware. While Windows RT could be an antidote to bloatware, this advantage comes at the cost of being able to install any type of desktop software at all. Windows RT has also seemingly failed — while a variety of manufacturers came out with their own Windows RT devices when Windows 8 was first released, they’ve all since been withdrawn from the market. Manufacturers who created Windows RT devices have criticized it in the media and stated they have no plans to produce any future Windows RT devices. The only Windows RT devices still on the market are Microsoft’s Surface (originally named Surface RT) and Surface 2. Nokia is also coming out with their own Windows RT tablet, but they’re in the process of being purchased by Microsoft. In other words, Windows RT just isn’t a factor when it comes to bloatware — you wouldn’t get a Windows RT device unless you purchased a Surface, but those wouldn’t come with bloatware anyway. Removing Bloatware or Reinstalling Windows 8.1 While bloatware is still a problem on new Windows systems and the Refresh option probably won’t help you, you can still eliminate bloatware in the traditional way. Bloatware can be uninstalled from the Windows Control Panel or with a dedicated removal tool like PC Decrapifier, which tries to automatically uninstall the junk for you. You can also do what Windows geeks have always tended to do with new computers — reinstall Windows 8 or 8.1 from scratch with installation media from Microsoft. You’ll get a clean Windows system and you can install only the hardware drivers and other software you need. Unfortunately, bloatware is still a big problem for Windows PCs. Windows 8 tries to do some things to address bloatware, but it ultimately comes up short. Most Windows PCs sold in most stores to most people will still have the typical bloatware slowing down the boot process, wasting memory, and adding clutter. Image Credit: LG on Flickr, Intel Free Press on Flickr, Wilson Hui on Flickr, Intel Free Press on Flickr, Vernon Chan on Flickr     

    Read the article

  • Creating a multi-column rollover image gallery with HTML 5

    - by nikolaosk
    I know it has been a while since I blogged about HTML 5. I have two posts in this blog about HTML 5. You can find them here and here.I am creating a small content website (only text,images and a contact form) for a friend of mine.He wanted to create a rollover gallery.The whole concept is that we have some small thumbnails on a page, the user hovers over them and they appear enlarged on a designated container/placeholder on a page. I am trying not to use Javascript scripts when I am using effects on a web page and this is what I will be doing in this post.  Well some people will say that HTML 5 is not supported in all browsers. That is true but most of the modern browsers support most of its recommendations. For people who still use IE6 some hacks must be devised.Well to be totally honest I cannot understand why anyone at this day and time is using IE 6.0.That really is beyond me.Well, the point of having a web browser is to be able to ENJOY the great experience that the WE? offers today.  Two very nice sites that show you what features and specifications are implemented by various browsers and their versions are http://caniuse.com/ and http://html5test.com/. At this times Chrome seems to support most of HTML 5 specifications.Another excellent way to find out if the browser supports HTML 5 and CSS 3 features is to use the Javascript lightweight library Modernizr.In this hands-on example I will be using Expression Web 4.0.This application is not a free application. You can use any HTML editor you like.You can use Visual Studio 2012 Express edition. You can download it here. In order to be absolutely clear this is not (and could not be ) a detailed tutorial on HTML 5. There are other great resources for that.Navigate to the excellent interactive tutorials of W3School.Another excellent resource is HTML 5 Doctor.For the people who are not convinced yet that they should invest time and resources on becoming experts on HTML 5 I should point out that HTML 5 websites will be ranked higher than others. Search engines will be able to locate better the content of our site and its relevance/importance since it is using semantic tags. Let's move now to the actual hands-on example. In this case (since I am mad Liverpool supporter) I will create a rollover image gallery of Liverpool F.C legends. I create a folder in my desktop. I name it Liverpool Gallery.Then I create two subfolders in it, large-images (I place the large images in there) and thumbs (I place the small images in there).Then I create an empty .html file called LiverpoolLegends.html and an empty .css file called style.css.Please have a look at the HTML Markup that I typed in my fancy editor package below<!doctype html><html lang="en"><head><title>Liverpool Legends Gallery</title><meta charset="utf-8"><link rel="stylesheet" type="text/css" href="style.css"></head><body><header><h1>A page dedicated to Liverpool Legends</h1><h2>Do hover over the images with the mouse to see the full picture</h2></header><ul id="column1"><li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8927200#"><img src="thumbs/john-barnes.jpg" alt=""><img class="large" src="large-images/john-barnes-large.jpg" alt=""></a></li><li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8927200#"><img src="thumbs/ian-rush.jpg" alt=""><img class="large" src="large-images/ian-rush-large.jpg" alt=""></a></li><li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8927200#"><img src="thumbs/graeme-souness.jpg" alt=""><img class="large" src="large-images/graeme-souness-large.jpg" alt=""></a></li></ul><ul id="column2"><li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8927200#"><img src="thumbs/steven-gerrard.jpg" alt=""><img class="large" src="large-images/steven-gerrard-large.jpg" alt=""></a></li><li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8927200#"><img src="thumbs/kenny-dalglish.jpg" alt=""><img class="large" src="large-images/kenny-dalglish-large.jpg" alt=""></a></li><li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8927200#"><img src="thumbs/robbie-fowler.jpg" alt=""><img class="large" src="large-images/robbie-fowler-large.jpg" alt=""></a></li></ul><ul id="column3"><li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8927200#"><img src="thumbs/alan-hansen.jpg" alt=""><img class="large" src="large-images/alan-hansen-large.jpg" alt=""></a></li><li><a href="http://weblogs.asp.net/controlpanel/blogs/posteditor.aspx?SelectedNavItem=Posts§ionid=1153&postid=8927200#"><img src="thumbs/michael-owen.jpg" alt=""><img class="large" src="large-images/michael-owen-large.jpg" alt=""></a></li></ul></body></html> It is very easy to follow the markup. Please have a look at the new doctype and the new semantic tag <header>. I have 3 columns and I place my images in there.There is a class called "large".I will use this class in my CSS code to hide the large image when the mouse is not on (hover) an image Make sure you validate your HTML 5 page in the validator found hereHave a look at the CSS code below that makes it all happen.img { border:none;}#column1 { position: absolute; top: 30; left: 100; }li { margin: 15px; list-style-type:none;}#column1 a img.large {  position: absolute; top: 0; left:700px; visibility: hidden;}#column1 a:hover { background: white;}#column1 a:hover img.large { visibility:visible;}#column2 { position: absolute; top: 30; left: 195px; }li { margin: 5px; list-style-type:none;}#column2 a img.large { position: absolute; top: 0; left:510px; margin-left:0; visibility: hidden;}#column2 a:hover { background: white;}#column2 a:hover img.large { visibility:visible;}#column3 { position: absolute; top: 30; left: 400px; width:108px;}li { margin: 5px; list-style-type:none;}#column3 a img.large { width: 260px; height:260px; position: absolute; top: 0; left:315px; margin-left:0; visibility: hidden;}#column3 a:hover { background: white;}#column3 a:hover img.large { visibility:visible;}?n the first line of the CSS code I set the images to have no border.Then I place the first column in the page and then remove the bullets from the list elements.Then I use the large CSS class to create a position for the large image and hide it.Finally when the hover event takes place I make the image visible.I repeat the process for the next two columns. I have tested the page with IE 10 and the latest versions of Opera,Chrome and Firefox.Feel free to style your HTML 5 gallery any way you want through the magic of CSS.I did not bother adding background colors and borders because that was beyond the scope of this post. Hope it helps!!!!

    Read the article

  • Big Data&rsquo;s Killer App&hellip;

    - by jean-pierre.dijcks
    Recently Keith spent  some time talking about the cloud on this blog and I will spare you my thoughts on the whole thing. What I do want to write down is something about the Big Data movement and what I think is the killer app for Big Data... Where is this coming from, ok, I confess... I spent 3 days in cloud land at the Cloud Connect conference in Santa Clara and it was quite a lot of fun. One of the nice things at Cloud Connect was that there was a track dedicated to Big Data, which prompted me to some extend to write this post. What is Big Data anyways? The most valuable point made in the Big Data track was that Big Data in itself is not very cool. Doing something with Big Data is what makes all of this cool and interesting to a business user! The other good insight I got was that a lot of people think Big Data means a single gigantic monolithic system holding gazillions of bytes or documents or log files. Well turns out that most people in the Big Data track are talking about a lot of collections of smaller data sets. So rather than thinking "big = monolithic" you should be thinking "big = many data sets". This is more than just theoretical, it is actually relevant when thinking about big data and how to process it. It is important because it means that the platform that stores data will most likely consist out of multiple solutions. You may be storing logs on something like HDFS, you may store your customer information in Oracle and you may store distilled clickstream information in some distilled form in MySQL. The big question you will need to solve is not what lives where, but how to get it all together and get some value out of all that data. NoSQL and MapReduce Nope, sorry, this is not the killer app... and no I'm not saying this because my business card says Oracle and I'm therefore biased. I think language is important, but as with storage I think pragmatic is better. In other words, some questions can be answered with SQL very efficiently, others can be answered with PERL or TCL others with MR. History should teach us that anyone trying to solve a problem will use any and all tools around. For example, most data warehouses (Big Data 1.0?) get a lot of data in flat files. Everyone then runs a bunch of shell scripts to massage or verify those files and then shoves those files into the database. We've even built shell script support into external tables to allow for this. I think the Big Data projects will do the same. Some people will use MapReduce, although I would argue that things like Cascading are more interesting, some people will use Java. Some data is stored on HDFS making Cascading the way to go, some data is stored in Oracle and SQL does do a good job there. As with storage and with history, be pragmatic and use what fits and neither NoSQL nor MR will be the one and only. Also, a language, while important, does in itself not deliver business value. So while cool it is not a killer app... Vertical Behavioral Analytics This is the killer app! And you are now thinking: "what does that mean?" Let's decompose that heading. First of all, analytics. I would think you had guessed by now that this is really what I'm after, and of course you are right. But not just analytics, which has a very large scope and means many things to many people. I'm not just after Business Intelligence (analytics 1.0?) or data mining (analytics 2.0?) but I'm after something more interesting that you can only do after collecting large volumes of specific data. That all important data is about behavior. What do my customers do? More importantly why do they behave like that? If you can figure that out, you can tailor web sites, stores, products etc. to that behavior and figure out how to be successful. Today's behavior that is somewhat easily tracked is web site clicks, search patterns and all of those things that a web site or web server tracks. that is where the Big Data lives and where these patters are now emerging. Other examples however are emerging, and one of the examples used at the conference was about prediction churn for a telco based on the social network its members are a part of. That social network is not about LinkedIn or Facebook, but about who calls whom. I call you a lot, you switch provider, and I might/will switch too. And that just naturally brings me to the next word, vertical. Vertical in this context means per industry, e.g. communications or retail or government or any other vertical. The reason for being more specific than just behavioral analytics is that each industry has its own data sources, has its own quirky logic and has its own demands and priorities. Of course, the methods and some of the software will be common and some will have both retail and service industry analytics in place (your corner coffee store for example). But the gist of it all is that analytics that can predict customer behavior for a specific focused group of people in a specific industry is what makes Big Data interesting. Building a Vertical Behavioral Analysis System Well, that is going to be interesting. I have not seen much going on in that space and if I had to have some criticism on the cloud connect conference it would be the lack of concrete user cases on big data. The telco example, while a step into the vertical behavioral part is not really on big data. It used a sample of data from the customers' data warehouse. One thing I do think, and this is where I think parts of the NoSQL stuff come from, is that we will be doing this analysis where the data is. Over the past 10 years we at Oracle have called this in-database analytics. I guess we were (too) early? Now the entire market is going there including companies like SAS. In-place btw does not mean "no data movement at all", what it means that you will do this on data's permanent home. For SAS that is kind of the current problem. Most of the inputs live in a data warehouse. So why move it into SAS and back? That all worked with 1 TB data warehouses, but when we are looking at 100TB to 500 TB of distilled data... Comments? As it is still early days with these systems, I'm very interested in seeing reactions and thoughts to some of these thoughts...

    Read the article

  • Launching a WPF Window in a Separate Thread, Part 1

    - by Reed
    Typically, I strongly recommend keeping the user interface within an application’s main thread, and using multiple threads to move the actual “work” into background threads.  However, there are rare times when creating a separate, dedicated thread for a Window can be beneficial.  This is even acknowledged in the MSDN samples, such as the Multiple Windows, Multiple Threads sample.  However, doing this correctly is difficult.  Even the referenced MSDN sample has major flaws, and will fail horribly in certain scenarios.  To ease this, I wrote a small class that alleviates some of the difficulties involved. The MSDN Multiple Windows, Multiple Threads Sample shows how to launch a new thread with a WPF Window, and will work in most cases.  The sample code (commented and slightly modified) works out to the following: // Create a thread Thread newWindowThread = new Thread(new ThreadStart( () => { // Create and show the Window Window1 tempWindow = new Window1(); tempWindow.Show(); // Start the Dispatcher Processing System.Windows.Threading.Dispatcher.Run(); })); // Set the apartment state newWindowThread.SetApartmentState(ApartmentState.STA); // Make the thread a background thread newWindowThread.IsBackground = true; // Start the thread newWindowThread.Start(); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } This sample creates a thread, marks it as single threaded apartment state, and starts the Dispatcher on that thread. That is the minimum requirements to get a Window displaying and handling messages correctly, but, unfortunately, has some serious flaws. The first issue – the created thread will run continuously until the application shuts down, given the code in the sample.  The problem is that the ThreadStart delegate used ends with running the Dispatcher.  However, nothing ever stops the Dispatcher processing.  The thread was created as a Background thread, which prevents it from keeping the application alive, but the Dispatcher will continue to pump dispatcher frames until the application shuts down. In order to fix this, we need to call Dispatcher.InvokeShutdown after the Window is closed.  This would require modifying the above sample to subscribe to the Window’s Closed event, and, at that point, shutdown the Dispatcher: // Create a thread Thread newWindowThread = new Thread(new ThreadStart( () => { Window1 tempWindow = new Window1(); // When the window closes, shut down the dispatcher tempWindow.Closed += (s,e) => Dispatcher.CurrentDispatcher.BeginInvokeShutdown(DispatcherPriority.Background); tempWindow.Show(); // Start the Dispatcher Processing System.Windows.Threading.Dispatcher.Run(); })); // Setup and start thread as before This eliminates the first issue.  Now, when the Window is closed, the new thread’s Dispatcher will shut itself down, which in turn will cause the thread to complete. The above code will work correctly for most situations.  However, there is still a potential problem which could arise depending on the content of the Window1 class.  This is particularly nasty, as the code could easily work for most windows, but fail on others. The problem is, at the point where the Window is constructed, there is no active SynchronizationContext.  This is unlikely to be a problem in most cases, but is an absolute requirement if there is code within the constructor of Window1 which relies on a context being in place. While this sounds like an edge case, it’s fairly common.  For example, if a BackgroundWorker is started within the constructor, or a TaskScheduler is built using TaskScheduler.FromCurrentSynchronizationContext() with the expectation of synchronizing work to the UI thread, an exception will be raised at some point.  Both of these classes rely on the existence of a proper context being installed to SynchronizationContext.Current, which happens automatically, but not until Dispatcher.Run is called.  In the above case, SynchronizationContext.Current will return null during the Window’s construction, which can cause exceptions to occur or unexpected behavior. Luckily, this is fairly easy to correct.  We need to do three things, in order, prior to creating our Window: Create and initialize the Dispatcher for the new thread manually Create a synchronization context for the thread which uses the Dispatcher Install the synchronization context Creating the Dispatcher is quite simple – The Dispatcher.CurrentDispatcher property gets the current thread’s Dispatcher and “creates a new Dispatcher if one is not already associated with the thread.”  Once we have the correct Dispatcher, we can create a SynchronizationContext which uses the dispatcher by creating a DispatcherSynchronizationContext.  Finally, this synchronization context can be installed as the current thread’s context via SynchronizationContext.SetSynchronizationContext.  These three steps can easily be added to the above via a single line of code: // Create a thread Thread newWindowThread = new Thread(new ThreadStart( () => { // Create our context, and install it: SynchronizationContext.SetSynchronizationContext( new DispatcherSynchronizationContext( Dispatcher.CurrentDispatcher)); Window1 tempWindow = new Window1(); // When the window closes, shut down the dispatcher tempWindow.Closed += (s,e) => Dispatcher.CurrentDispatcher.BeginInvokeShutdown(DispatcherPriority.Background); tempWindow.Show(); // Start the Dispatcher Processing System.Windows.Threading.Dispatcher.Run(); })); // Setup and start thread as before This now forces the synchronization context to be in place before the Window is created and correctly shuts down the Dispatcher when the window closes. However, there are quite a few steps.  In my next post, I’ll show how to make this operation more reusable by creating a class with a far simpler API…

    Read the article

  • Big Data – Is Big Data Relevant to me? – Big Data Questionnaires – Guest Post by Vinod Kumar

    - by Pinal Dave
    This guest post is by Vinod Kumar. Vinod Kumar has worked with SQL Server extensively since joining the industry over a decade ago. Working on various versions of SQL Server 7.0, Oracle 7.3 and other database technologies – he now works with the Microsoft Technology Center (MTC) as a Technology Architect. Let us read the blog post in Vinod’s own voice. I think the series from Pinal is a good one for anyone planning to start on Big Data journey from the basics. In my daily customer interactions this buzz of “Big Data” always comes up, I react generally saying – “Sir, do you really have a ‘Big Data’ problem or do you have a big Data problem?” Generally, there is a silence in the air when I ask this question. Data is everywhere in organizations – be it big data, small data, all data and for few it is bad data which is same as no data :). Wow, don’t discount me as someone who opposes “Big Data”, I am a big supporter as much as I am a critic of the abuse of this term by the people. In this post, I wanted to let my mind flow so that you can also think in the direction I want you to see these concepts. In any case, this is not an exhaustive dump of what is in my mind – but you will surely get the drift how I am going to question Big Data terms from customers!!! Is Big Data Relevant to me? Many of my customers talk to me like blank whiteboard with no idea – “why Big Data”. They want to jump into the bandwagon of technology and they want to decipher insights from their unexplored data a.k.a. unstructured data with structured data. So what are these industry scenario’s that come to mind? Here are some of them: Financials Fraud detection: Banks and Credit cards are monitoring your spending habits on real-time basis. Customer Segmentation: applies in every industry from Banking to Retail to Aviation to Utility and others where they deal with end customer who consume their products and services. Customer Sentiment Analysis: Responding to negative brand perception on social or amplify the positive perception. Sales and Marketing Campaign: Understand the impact and get closer to customer delight. Call Center Analysis: attempt to take unstructured voice recordings and analyze them for content and sentiment. Medical Reduce Re-admissions: How to build a proactive follow-up engagements with patients. Patient Monitoring: How to track Inpatient, Out-Patient, Emergency Visits, Intensive Care Units etc. Preventive Care: Disease identification and Risk stratification is a very crucial business function for medical. Claims fraud detection: There is no precise dollars that one can put here, but this is a big thing for the medical field. Retail Customer Sentiment Analysis, Customer Care Centers, Campaign Management. Supply Chain Analysis: Every sensors and RFID data can be tracked for warehouse space optimization. Location based marketing: Based on where a check-in happens retail stores can be optimize their marketing. Telecom Price optimization and Plans, Finding Customer churn, Customer loyalty programs Call Detail Record (CDR) Analysis, Network optimizations, User Location analysis Customer Behavior Analysis Insurance Fraud Detection & Analysis, Pricing based on customer Sentiment Analysis, Loyalty Management Agents Analysis, Customer Value Management This list can go on to other areas like Utility, Manufacturing, Travel, ITES etc. So as you can see, there are obviously interesting use cases for each of these industry verticals. These are just representative list. Where to start? A lot of times I try to quiz customers on a number of dimensions before starting a Big Data conversation. Are you getting the data you need the way you want it and in a timely manner? Can you get in and analyze the data you need? How quickly is IT to respond to your BI Requests? How easily can you get at the data that you need to run your business/department/project? How are you currently measuring your business? Can you get the data you need to react WITHIN THE QUARTER to impact behaviors to meet your numbers or is it always “rear-view mirror?” How are you measuring: The Brand Customer Sentiment Your Competition Your Pricing Your performance Supply Chain Efficiencies Predictive product / service positioning What are your key challenges of driving collaboration across your global business?  What the challenges in innovation? What challenges are you facing in getting more information out of your data? Note: Garbage-in is Garbage-out. Hold good for all reporting / analytics requirements Big Data POCs? A number of customers get into the realm of setting a small team to work on Big Data – well it is a great start from an understanding point of view, but I tend to ask a number of other questions to such customers. Some of these common questions are: To what degree is your advanced analytics (natural language processing, sentiment analysis, predictive analytics and classification) paired with your Big Data’s efforts? Do you have dedicated resources exploring the possibilities of advanced analytics in Big Data for your business line? Do you plan to employ machine learning technology while doing Advanced Analytics? How is Social Media being monitored in your organization? What is your ability to scale in terms of storage and processing power? Do you have a system in place to sort incoming data in near real time by potential value, data quality, and use frequency? Do you use event-driven architecture to manage incoming data? Do you have specialized data services that can accommodate different formats, security, and the management requirements of multiple data sources? Is your organization currently using or considering in-memory analytics? To what degree are you able to correlate data from your Big Data infrastructure with that from your enterprise data warehouse? Have you extended the role of Data Stewards to include ownership of big data components? Do you prioritize data quality based on the source system (that is Facebook/Twitter data has lower quality thresholds than radio frequency identification (RFID) for a tracking system)? Do your retention policies consider the different legal responsibilities for storing Big Data for a specific amount of time? Do Data Scientists work in close collaboration with Data Stewards to ensure data quality? How is access to attributes of Big Data being given out in the organization? Are roles related to Big Data (Advanced Analyst, Data Scientist) clearly defined? How involved is risk management in the Big Data governance process? Is there a set of documented policies regarding Big Data governance? Is there an enforcement mechanism or approach to ensure that policies are followed? Who is the key sponsor for your Big Data governance program? (The CIO is best) Do you have defined policies surrounding the use of social media data for potential employees and customers, as well as the use of customer Geo-location data? How accessible are complex analytic routines to your user base? What is the level of involvement with outside vendors and third parties in regard to the planning and execution of Big Data projects? What programming technologies are utilized by your data warehouse/BI staff when working with Big Data? These are some of the important questions I ask each customer who is actively evaluating Big Data trends for their organizations. These questions give you a sense of direction where to start, what to use, how to secure, how to analyze and more. Sign off Any Big data is analysis is incomplete without a compelling story. The best way to understand this is to watch Hans Rosling – Gapminder (2:17 to 6:06) videos about the third world myths. Don’t get overwhelmed with the Big Data buzz word, the destination to what your data speaks is important. In this blog post, we did not particularly look at any Big Data technologies. This is a set of questionnaire one needs to keep in mind as they embark their journey of Big Data. I did write some of the basics in my blog: Big Data – Big Hype yet Big Opportunity. Do let me know if these questions make sense?  Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • SQL SERVER – 5 Tips for Improving Your Data with expressor Studio

    - by pinaldave
    It’s no secret that bad data leads to bad decisions and poor results.  However, how do you prevent dirty data from taking up residency in your data store?  Some might argue that it’s the responsibility of the person sending you the data.  While that may be true, in practice that will rarely hold up.  It doesn’t matter how many times you ask, you will get the data however they decide to provide it. So now you have bad data.  What constitutes bad data?  There are quite a few valid answers, for example: Invalid date values Inappropriate characters Wrong data Values that exceed a pre-set threshold While it is certainly possible to write your own scripts and custom SQL to identify and deal with these data anomalies, that effort often takes too long and becomes difficult to maintain.  Instead, leveraging an ETL tool like expressor Studio makes the data cleansing process much easier and faster.  Below are some tips for leveraging expressor to get your data into tip-top shape. Tip 1:     Build reusable data objects with embedded cleansing rules One of the new features in expressor Studio 3.2 is the ability to define constraints at the metadata level.  Using expressor’s concept of Semantic Types, you can define reusable data objects that have embedded logic such as constraints for dealing with dirty data.  Once defined, they can be saved as a shared atomic type and then re-applied to other data attributes in other schemas. As you can see in the figure above, I’ve defined a constraint on zip code.  I can then save the constraint rules I defined for zip code as a shared atomic type called zip_type for example.   The next time I get a different data source with a schema that also contains a zip code field, I can simply apply the shared atomic type (shown below) and the previously defined constraints will be automatically applied. Tip 2:     Unlock the power of regular expressions in Semantic Types Another powerful feature introduced in expressor Studio 3.2 is the option to use regular expressions as a constraint.   A regular expression is used to identify patterns within data.   The patterns could be something as simple as a date format or something much more complex such as a street address.  For example, I could define that a valid IP address should be made up of 4 numbers, each 0 to 255, and separated by a period.  So 192.168.23.123 might be a valid IP address whereas 888.777.0.123 would not be.   How can I account for this using regular expressions? A very simple regular expression that would look for any 4 sets of 3 digits separated by a period would be:  ^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$ Alternatively, the following would be the exact check for truly valid IP addresses as we had defined above:  ^(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\.(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\.(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])\.(25[0-5]|2[0-4][0-9]|1[0-9]{2}|[1-9]?[0-9])$ .  In expressor, we would enter this regular expression as a constraint like this: Here we select the corrective action to be ‘Escalate’, meaning that the expressor Dataflow operator will decide what to do.  Some of the options include rejecting the offending record, skipping it, or aborting the dataflow. Tip 3:     Email pattern expressions that might come in handy In the example schema that I am using, there’s a field for email.  Email addresses are often entered incorrectly because people are trying to avoid spam.  While there are a lot of different ways to define what constitutes a valid email address, a quick search online yields a couple of really useful regular expressions for validating email addresses: This one is short and sweet:  \b[A-Z0-9._%+-]+@[A-Z0-9.-]+\.[A-Z]{2,4}\b (Source: http://www.regular-expressions.info/) This one is more specific about which characters are allowed:  ^([a-zA-Z0-9_\-\.]+)@((\[[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.)|(([a-zA-Z0-9\-]+\.)+))([a-zA-Z]{2,4}|[0-9]{1,3})(\]?)$ (Source: http://regexlib.com/REDetails.aspx?regexp_id=26 ) Tip 4:     Reject “dirty data” for analysis or further processing Yet another feature introduced in expressor Studio 3.2 is the ability to reject records based on constraint violations.  To capture reject records on input, simply specify Reject Record in the Error Handling setting for the Read File operator.  Then attach a Write File operator to the reject port of the Read File operator as such: Next, in the Write File operator, you can configure the expressor operator in a similar way to the Read File.  The key difference would be that the schema needs to be derived from the upstream operator as shown below: Once configured, expressor will output rejected records to the file you specified.  In addition to the rejected records, expressor also captures some diagnostic information that will be helpful towards identifying why the record was rejected.  This makes diagnosing errors much easier! Tip 5:    Use a Filter or Transform after the initial cleansing to finish the job Sometimes you may want to predicate the data cleansing on a more complex set of conditions.  For example, I may only be interested in processing data containing males over the age of 25 in certain zip codes.  Using an expressor Filter operator, you can define the conditional logic which isolates the records of importance away from the others. Alternatively, the expressor Transform operator can be used to alter the input value via a user defined algorithm or transformation.  It also supports the use of conditional logic and data can be rejected based on constraint violations. However, the best tip I can leave you with is to not constrain your solution design approach – expressor operators can be combined in many different ways to achieve the desired results.  For example, in the expressor Dataflow below, I can post-process the reject data from the Filter which did not meet my pre-defined criteria and, if successful, Funnel it back into the flow so that it gets written to the target table. I continue to be impressed that expressor offers all this functionality as part of their FREE expressor Studio desktop ETL tool, which you can download from here.  Their Studio ETL tool is absolutely free and they are very open about saying that if you want to deploy their software on a dedicated Windows Server, you need to purchase their server software, whose pricing is posted on their website. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • How to Organize a Programming Language Club

    - by Ben Griswold
    I previously noted that we started a language club at work.  You know, I searched around but I couldn’t find a copy of the How to Organize a Programming Language Club Handbook. Maybe it’s sold out?  Yes, Stack Overflow has quite a bit of information on how to learn and teach new languages and there’s also a good number of online tutorials which provide language introductions but I was interested in group learning.  After   two months of meetings, I present to you the Unofficial How to Organize a Programming Language Club Handbook.  1. Gauge interest. Start by surveying prospects. “Excuse me, smart-developer-whom-I-work-with-and-I-think-might-be-interested-in-learning-a-new-coding-language-with-me. Are you interested in learning a new language with me?” If you’re lucky, you work with a bunch of really smart folks who aren’t shy about teaching/learning in a group setting and you’ll have a collective interest in no time.  Simply suggesting the idea is the only effort required.  If you don’t work in this type of environment, maybe you should consider a new place of employment.  2. Make it official. Send out a “Welcome to the Club” email: There’s been talk of folks itching to learn new languages – Python, Scala, F# and Haskell to name a few.  Rather than taking on new languages alone, let’s learn in the open.  That’s right.  Let’s start a languages club.  We’ll have everything a real club needs – secret handshake, goofy motto and a high-and-mighty sense that we’re better than everybody else. T-shirts?  Hell YES!  Anyway, I’ve thrown this idea around the office and no one has laughed at me yet so please consider this your very official invitation to be in THE club. [Insert your ideas about how the club might be run, solicit feedback and suggestions, ask what other folks would like to get out the club, comment about club hazing practices and talk up the T-shirts even more. Finally, call out the languages you are interested in learning and ask the group for their list.] 3.  Send out invitations to the first meeting.  Don’t skimp!  Hallmark greeting cards for everyone.  Personalized.  Hearts over the I’s and everything.  Oh, and be sure to include the list of suggested languages with vote count.  Here the list of languages we are interested in: Python 5 Ruby 4 Objective-C 3 F# 2 Haskell 2 Scala 2 Ada 1 Boo 1 C# 1 Clojure 1 Erlang 1 Go 1 Pi 1 Prolog 1 Qt 1 4.  At the first meeting, there must be cake.  Lots of cake. And you should tackle some very important questions: Which language should we start with?  You can immediately go with the top vote getter or you could do as we did and designate each person to provide a high-level review of each of the proposed languages over the next two weeks.  After all presentations are completed, vote on the language. Our high-level review consisted of answers to a series of questions. Decide how often and where the group will meet.  We, for example, meet for a brown bag lunch every Wednesday.  Decide how you’re going to learn.  We determined that the best way to learn is to just dive in and write code.  After choosing our first language (Python), we talked about building an application, or performing coding katas, but we ultimately choose to complete a series of Project Euler problems.  We kept it simple – each member works out the same two problems each week in preparation of a code review the following Wednesday. 5.  Code, Review, Learn.  Prior to the weekly meeting, everyone uploads their solutions to our internal wiki.  Each Project Euler problem has a dedicated page.  In the meeting, we use a really fancy HD projector to show off each member’s solution.  It is very important to use an HD projector.  Again, don’t skimp!  Each code author speaks to their solution, everyone else comments, applauds, points fingers and laughs, etc.  As much as I’ve learned from solving the problems on my own, I’ve learned at least twice as much at the group code review.  6.  Rinse. Lather. Repeat.  We’ve hosted the language club for 7 weeks now.  The first meeting just set the stage.  The next two meetings provided a review of the languages followed by a first language selection.  The remaining meetings focused on Python and Project Euler problems.  Today we took a vote as to whether or not we’re ready to switch to another language and/or another problem set.  Pretty much everyone wants to stay the course for a few more weeks at least.  Until then, we’ll continue to code the next two solutions, review and learn. Again, we’ve been having a good time with the programming language club.  I’m glad it got off the ground.  What do you think?  Would you be interested in a language club?  Any suggestions on what we might do better?

    Read the article

  • Robotic Arm &ndash; Hardware

    - by Szymon Kobalczyk
    This is first in series of articles about project I've been building  in my spare time since last Summer. Actually it all began when I was researching a topic of modeling human motion kinematics in order to create gesture recognition library for Kinect. This ties heavily into motion theory of robotic manipulators so I also glanced at some designs of robotic arms. Somehow I stumbled upon this cool looking open source robotic arm: It was featured on Thingiverse and published by user jjshortcut (Jan-Jaap). Since for some time I got hooked on toying with microcontrollers, robots and other electronics, I decided to give it a try and build it myself. In this post I will describe the hardware build of the arm and in later posts I will be writing about the software to control it. Another reason to build the arm myself was the cost factor. Even small commercial robotic arms are quite expensive – products from Lynxmotion and Dagu look great but both cost around USD $300 (actually there is one cheap arm available but it looks more like a toy to me). In comparison this design is quite cheap. It uses seven hobby grade servos and even the cheapest ones should work fine. The structure is build from a set of laser cut parts connected with few metal spacers (15mm and 47mm) and lots of M3 screws. Other than that you’d only need a microcontroller board to drive the servos. So in total it comes a lot cheaper to build it yourself than buy an of the shelf robotic arm. Oh, and if you don’t like this one there are few more robotic arm projects at Thingiverse (including one by oomlout). Laser cut parts Some time ago I’ve build another robot using laser cut parts so I knew the process already. You can grab the design files in both DXF and EPS format from Thingiverse, and there are also 3D models of each part in STL. Actually the design is split into a second project for the mini servo gripper (there is also a standard servo version available but it won’t fit this arm).  I wanted to make some small adjustments, layout, and add measurements to the parts before sending it for cutting. I’ve looked at some free 2D CAD programs, and finally did all this work using QCad 3 Beta with worked great for me (I also tried LibreCAD but it didn’t work that well). All parts are cut from 4 mm thick material. Because I was worried that acrylic is too fragile and might break, I also ordered another set cut from plywood. In the end I build it from plywood because it was easier to glue (I was told acrylic requires a special glue). Btw. I found a great laser cutter service in Kraków and highly recommend it (www.ebbox.com.pl). It cost me only USD $26 for both sets ($16 acrylic + $10 plywood). Metal parts I bought all the M3 screws and nuts at local hardware store. Make sure to look for nylon lock (nyloc) nuts for the gripper because otherwise it unscrews and comes apart quickly. I couldn’t find local store with metal spacers and had to order them online (you’d need 11 x 47mm and 3 x 15mm). I think I paid less than USD $10 for all metal parts. Servos This arm uses five standards size servos to drive the arm itself, and two micro servos are used on the gripper. Author of the project used Modelcraft RS-2 Servo and Modelcraft ES-05 HT Servo. I had two Futaba S3001 servos laying around, and ordered additional TowerPro SG-5010 standard size servos and TowerPro SG90 micro servos. However it turned out that the SG90 won’t fit in the gripper so I had to replace it with a slightly smaller E-Sky EK2-0508 micro servo. Later it also turned out that Futaba servos make some strange noise while working so I swapped one with TowerPro SG-5010 which has higher torque (8kg / cm). I’ve also bought three servo extension cables. All servos cost me USD $45. Assembly The build process is not difficult but you need to think carefully about order of assembling it. You can do the base and upper arm first. Because two servos in the base are close together you need to put first with one piece of lower arm already connected before you put the second servo. Then you connect the upper arm and finally put the second piece of lower arm to hold it together. Gripper and base require some gluing so think it through too. Make sure to look closely at all the photos on Thingiverse (also other people copies) and read additional posts on jjshortcust’s blog: My mini servo grippers and completed robotic arm  Multiply the robotic arm and electronics Here is also Rob’s copy cut from aluminum My assembled arm looks like this – I think it turned out really nice: Servo controller board The last piece of hardware I needed was an electronic board that would take command from PC and drive all seven servos. I could probably use Arduino for this task, and in fact there are several Arduino servo shields available (for example from Adafruit or Renbotics).  However one problem is that most support only up to six servos, and second that their accuracy is limited by Arduino’s timer frequency. So instead I looked for dedicated servo controller and found a series of Maestro boards from Pololu. I picked the Pololu Mini Maestro 12-Channel USB Servo Controller. It has many nice features including native USB connection, high resolution pulses (0.25µs) with no jitter, built-in speed and acceleration control, and even scripting capability. Another cool feature is that besides servo control, each channel can be configured as either general input or output. So far I’m using seven channels so I still have five available to connect some sensors (for example distance sensor mounted on gripper might be useful). And last but important factor was that they have SDK in .NET – what more I could wish for! The board itself is very small – half of the size of Tic-Tac box. I picked one for about USD $35 in this store. Perhaps another good alternative would be the Phidgets Advanced Servo 8-Motor – but it is significantly more expensive at USD $87.30. The Maestro Controller Driver and Software package includes Maestro Control Center program with lets you immediately configure the board. For each servo I first figured out their move range and set the min/max limits. I played with setting the speed an acceleration values as well. Big issue for me was that there are two servos that control position of lower arm (shoulder joint), and both have to be moved at the same time. This is where the scripting feature of Pololu board turned out very helpful. I wrote a script that synchronizes position of second servo with first one – so now I only need to move one servo and other will follow automatically. This turned out tricky because I couldn’t find simple offset mapping of the move range for each servo – I had to divide it into several sub-ranges and map each individually. The scripting language is bit assembler-like but gets the job done. And there is even a runtime debugging and stack view available. Altogether I’m very happy with the Pololu Mini Maestro Servo Controller, and with this final piece I completed the build and was able to move my arm from the Meastro Control program.   The total cost of my robotic arm was: $10 laser cut parts $10 metal parts $45 servos $35 servo controller ----------------------- $100 total So here you have all the information about the hardware. In next post I’ll start talking about the software that I wrote in Microsoft Robotics Developer Studio 4. Stay tuned!

    Read the article

  • PeopleSoft Upgrades, Fusion, & BI for Leading European PeopleSoft Applications Customers

    - by Mark Rosenberg
    With so many industry-leading services firms around the globe managing their businesses with PeopleSoft, it’s always an adventure setting up times and meetings for us to keep in touch with them, especially those outside of North America who often do not get to join us at Oracle OpenWorld. Fortunately, during the first two weeks of May, Nigel Woodland (Oracle’s Service Industries Director for the EMEA region) and I successfully blocked off our calendars to visit seven different customers spanning four countries in Western Europe. We met executives and leaders at four Staffing industry firms, two Professional Services firms that engage in consulting and auditing, and a Financial Services firm. As we shared the latest information regarding product capabilities and plans, we also gained valuable insight into the hot technology topics facing these businesses. What we heard was both informative and inspiring, and I suspect other Oracle PeopleSoft applications customers can benefit from one or more of the following observations from our trip. Great IT Plans Get Executed When You Respect the Users Each of our visits followed roughly the same pattern. After introductions, Nigel outlined Oracle’s product and technology strategy, including a discussion of how we at Oracle invest in each layer of the “technology stack” to provide customers with unprecedented business management capabilities and choice. Then, I provided the specifics of the PeopleSoft product line’s investment strategy, detailing the dramatic number of rich usability and functionality enhancements added to release 9.1 since its general availability in 2009 and the game-changing capabilities slated for 9.2. What was most exciting about each of these discussions was that shortly after my talking about what customers can do with release 9.1 right now to drive up user productivity and satisfaction, I saw the wheels turning in the minds of our audiences. Business analyst and end user-configurable tools and technologies, such as WorkCenters and the Related Action Framework, that provide the ability to tailor a “central command center” to the exact needs of each recruiter, biller, and every other role in the organization were exactly what each of our customers had been looking for. Every one of our audiences agreed that these tools which demonstrate a respect for the user would finally help IT pole vault over the wall of resistance that users had often raised in the past. With these new user-focused capabilities, IT is positioned to definitively partner with the business, instead of drag the business along, to unlock the value of their investment in PeopleSoft. This topic of respecting the user emerged during our very first visit, which was at Vital Services Group at their Head Office “The Mill” in Manchester, England. (If you are a student of architecture and are ever in Manchester, you should stop in to see this amazingly renovated old mill building.) I had just finished explaining our PeopleSoft 9.2 roadmap, and Mike Code, PeopleSoft Systems Manager for this innovative staffing company, said, “Mark, the new features you’ve shown us in 9.1/9.2 are very relevant to our business. As we forge ahead with the 9.1 upgrade, the ability to configure a targeted user interface with WorkCenters, Related Actions, Pivot Grids, and Alerts will enable us to satisfy the business that this upgrade is for them and will deliver tangible benefits. In fact, you’ve highlighted that we need to start talking to the business to keep up the momentum to start reviewing the 9.2 upgrade after we get to 9.1, because as much as 9.1 and PeopleTools 8.52 offers, what you’ve shown us for 9.2 is what we’ve envisioned was ultimately possible with our investment in PeopleSoft applications.” We also received valuable feedback about our investment for the Staffing industry when we visited with Hans Wanders, CIO of Randstad (the second largest Staffing company in the world) in the Netherlands. After our visit, Hans noted, “It was very interesting to see how the PeopleSoft applications have developed. I was truly impressed by many of the new developments.” Hans and Mike, sincere thanks for the validation that our team’s hard work and dedication to “respecting the users” is worth the effort! Co-existence of PeopleSoft and Fusion Applications Just Makes Sense As a “product person,” one of the most rewarding things about visiting customers is that they actually want to talk to me. Sometimes, they want to discuss a product area that we need to enhance; other times, they are interested in learning how to extract more value from their applications; and still others, they want to tell me how they are using the applications to drive real value for the business. During this trip, I was very pleased to hear that several of our customers not only thought the co-existence of Fusion applications alongside PeopleSoft applications made sense in theory, but also that they were aggressively looking at how to deploy one or more Fusion applications alongside their PeopleSoft HCM and FSCM applications. The most common deployment plan in the works by three of the organizations is to upgrade to PeopleSoft 9.1 or 9.2, and then adopt one of the new Fusion HCM applications, such as Fusion Performance Management or the full suite of  Fusion Talent Management. For example, during an applications upgrade planning discussion with the staffing company Hays plc., Mark Thomas, who is Hays’ UK IT Director, commented, “We are very excited about where we can go with the latest versions of the PeopleSoft applications in conjunction with Fusion Talent Management.” Needless to say, this news was very encouraging, because it reiterated that our applications investment strategy makes good business sense for our customers. Next Generation Business Intelligence Is the Key to the Future The third, and perhaps most exciting, lesson I learned during this journey is that our audiences already know that the latest generation of Business Intelligence technologies will be the “secret sauce” for organizations to transform business in radical ways. While a number of the organizations we visited on the trip have deployed or are deploying Oracle Business Intelligence Enterprise Edition and the associated analytics applications to provide dashboards of easy-to-understand, user-configurable metrics that help optimize business performance according to current operating procedures, what’s most exciting to them is being able to use Business Intelligence to change the way an organization does business, grows revenue, and makes a profit. In particular, several executives we met asked whether we can help them minimize the need to have perfectly structured data and at the same time generate analytics that improve order fulfillment decision-making. To them, the path to future growth lies in having the ability to analyze unstructured data rapidly and intuitively and leveraging technology’s ability to detect patterns that a human cannot reasonably be expected to see. For illustrative purposes, here is a good example of a business problem where analyzing a combination of structured and unstructured data can produce better results. If you have a resource manager trying to decide which person would be the best fit for an assignment in terms of ensuring (a) client satisfaction, (b) the individual’s satisfaction with the work, (c) least travel distance, and (d) highest margin, you traditionally compare resource qualifications to assignment needs, calculate margins on past work with the client, and measure distances. To perform these comparisons, you are likely to need the organization to have profiles setup, people ranked against profiles, margin targets setup, margins measured, distances setup, distances measured, and more. As you can imagine, this requires organizations to plan and implement data setup, capture, and quality management initiatives to ensure that dependable information is available to support resourcing analysis and decisions. In the fast-paced, tight-budget world in which most organizations operate today, the effort and discipline required to maintain high-quality, structured data like those described in the above example are certainly not desirable and in some cases are not feasible. You can imagine how intrigued our audiences were when I informed them that we are ready to help them analyze volumes of unstructured data, detect trends, and produce recommendations. Our discussions delved into examples of how the firms could leverage Oracle’s Secure Enterprise Search and Endeca technologies to keyword search against, compare, and learn from unstructured resource and assignment data. We also considered examples of how they could employ Oracle Real-Time Decisions to generate statistically significant recommendations based on similar resourcing scenarios that have produced the desired satisfaction and profit margin results. --- Although I had almost no time for sight-seeing during this trip to Europe, I have to say that it may have been one of the most energizing and engaging trips of my career. Showing these dedicated customers how they can give every user a uniquely tailored set of tools and address business problems in ways that have to date been impossible made the journey across the Atlantic more than worth it. If any of these three topics intrigue you, I’d recommend you contact your Oracle applications representative to arrange for more detailed discussions with the appropriate members of our organization.

    Read the article

  • SQL Server Master class winner

    - by Testas
     The winner of the SQL Server MasterClass competition courtesy of the UK SQL Server User Group and SQL Server Magazine!    Steve Hindmarsh     There is still time to register for the seminar yourself at:  www.regonline.co.uk/kimtrippsql     More information about the seminar     Where: Radisson Edwardian Heathrow Hotel, London  When: Thursday 17th June 2010  This one-day MasterClass will focus on many of the top issues companies face when implementing and maintaining a SQL Server-based solution. In the case where a company has no dedicated DBA, IT managers sometimes struggle to keep the data tier performing well and the data available. This can be especially troublesome when the development team is unfamiliar with the affect application design choices have on database performance. The Microsoft SQL Server MasterClass 2010 is presented by Paul S. Randal and Kimberly L. Tripp, two of the most experienced and respected people in the SQL Server world. Together they have over 30 years combined experience working with SQL Server in the field, and on the SQL Server product team itself. This is a unique opportunity to hear them present at a UK event which will: Debunk many of the ingrained misconceptions around SQL Server's behaviour    Show you disaster recovery techniques critical to preserving your company's life-blood - the data    Explain how a common application design pattern can wreak havoc in the database Walk through the top-10 points to follow around operations and maintenance for a well-performing and available data tier! Please Note: Agenda may be subject to change  Sessions Abstracts  KEYNOTE: Bridging the Gap Between Development and Production    Applications are commonly developed with little regard for how design choices will affect performance in production. This is often because developers don't realize the implications of their design on how SQL Server will be able to handle a high workload (e.g. blocking, fragmentation) and/or because there's no full-time trained DBA that can recognize production problems and help educate developers. The keynote sets the stage for the rest of the day. Discussing some of the issues that can arise, explaining how some can be avoided and highlighting some of the features in SQL 2008 that can help developers and DBAs make better use of SQL Server, and troubleshoot when things go wrong.   SESSION ONE: SQL Server Mythbusters  It's amazing how many myths and misconceptions have sprung up and persisted over the years about SQL Server - after many years helping people out on forums, newsgroups, and customer engagements, Paul and Kimberly have heard it all. Are there really non-logged operations? Can interrupting shrinks or rebuilds cause corruption? Can you override the server's MAXDOP setting? Will the server always do a table-scan to get a row count? Many myths lead to poor design choices and inappropriate maintenance practices so these are just a few of many, many myths that Paul and Kimberly will debunk in this fast-paced session on how SQL Server operates and should be managed and maintained.   SESSION TWO: Database Recovery Techniques Demo-Fest  Even if a company has a disaster recovery strategy in place, they need to practice to make sure that the plan will work when a disaster does strike. In this fast-paced demo session Paul and Kimberly will repeatedly do nasty things to databases and then show how they are recovered - demonstrating many techniques that can be used in production for disaster recovery. Not for the faint-hearted!   SESSION THREE: GUIDs: Use, Abuse, and How To Move Forward   Since the addition of the GUID (Microsoft’s implementation of the UUID), my life as a consultant and "tuner" has been busy. I’ve seen databases designed with GUID keys run fairly well with small workloads but completely fall over and fail because they just cannot scale. And, I know why GUIDs are chosen - it simplifies the handling of parent/child rows in your batches so you can reduce round-trips or avoid dealing with identity values. And, yes, sometimes it's even for distributed databases and/or security that GUIDs are chosen. I'm not entirely against ever using a GUID but overusing and abusing GUIDs just has to be stopped! Please, please, please let me give you better solutions and explanations on how to deal with your parent/child rows, round-trips and clustering keys!   SESSION 4: Essential Database Maintenance  In this session, Paul and Kimberly will run you through their top-ten database maintenance recommendations, with a lot of tips and tricks along the way. These are distilled from almost 30 years combined experience working with SQL Server customers and are geared towards making your databases more performant, more available, and more easily managed (to save you time!). Everything in this session will be practical and applicable to a wide variety of databases. Topics covered include: backups, shrinks, fragmentation, statistics, and much more! Focus will be on 2005 but we'll explain some of the key differences for 2000 and 2008 as well. Speaker Biographies     Kimberley L. Tripp Paul and Kimberly are a husband-and-wife team who own and run SQLskills.com, a world-renowned SQL Server consulting and training company. They are both SQL Server MVPs and Microsoft Regional Directors, with over 30 years of combined experience on SQL Server. Paul worked on the SQL Server team for nine years in development and management roles, writing many of the DBCC commands, and ultimately with responsibility for core Storage Engine for SQL Server 2008. Paul writes extensively on his blog (SQLskills.com/blogs/Paul) and for TechNet Magazine, for which he is also a Contributing Editor. Kimberly worked on the SQL Server team in the early 1990s as a tester and writer before leaving to found SQLskills and embrace her passion for teaching and consulting. Kimberly has been a staple at worldwide conferences since she first presented at TechEd in 1996, and she blogs at SQLskills.com/blogs/Kimberly. They have written Microsoft whitepapers and books for SQL Server 2000, 2005 and 2008, and are regular, top-rated presenters worldwide on database maintenance, high availability, disaster recovery, performance tuning, and SQL Server internals. Together they teach the SQL MCM certification and throughout Microsoft.In their spare time, they like to find frogfish in remote corners of the world.   Speaker Testimonials  "To call them good trainers is an epic understatement. They know how to deliver technical material in ways that illustrate it well. I had to stop Paul at one point and ask him how long it took to build a particular slide because the animations were so good at conveying a hard-to-describe process." "These are not beginner presenters, and they put an extreme amount of preparation and attention to detail into everything that they do. Completely, utterly professional." "When it comes to the instructors themselves, Kimberly and Paul simply have no equal. Not only are they both ultimate authorities, but they have endless enthusiasm about the material, and spot on delivery. If either ever got tired they never showed it, even after going all day and all week. We witnessed countless demos over the course of the week, some extremely involved, multi-step processes, and I can’t recall one that didn’t go the way it was supposed to." "You might think that with this extreme level of skill comes extreme levels of egotism and lack of patience. Nothing could be further from the truth. ... They simply know how to teach, and are approachable, humble, and patient." "The experience Paul and Kimberly have had with real live customers yields a lot more information and things to watch out for than you'd ever get from documentation alone." “Kimberly, I just wanted to send you an email to let you know how awesome you are! I have applied some of your indexing strategies to our website’s homegrown CMS and we are experiencing a significant performance increase. WOW....amazing tips delivered in an exciting way!  Thanks again” 

    Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >