Search Results

Search found 2840 results on 114 pages for 'ports'.

Page 86/114 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

• Windows XP - Power surge on hub port

  - by Swift-Tuttle

  Since last few weeks I constantly get this error, as status bar balloon: Power Surge on Hub Port - A USB device has exceeded the power limits of its hub port. Due to this now I am unable to access any USB devices properly, they get disconnected intermittently. I did quite a few things to resolve this problem, firstly obviously through the Windows help. I even tried all the things told on the Microsoft website(which essentially says is to check and update the driver) but in vain. One suggestion, I found when I google'd was to disable the USB2 controller through the Device Manager and since at every startup the System configuration comes up complaining that it has been changed etc.(On that same site it is mentioned to ignore this message.) But after everything I still cant solve this problem. Any help is much appreciated. The system is installed with Windows XP service Pack 3 and all the updates till last month. Please let me know if any other hardware info is required. **UPDATE** My laptop is about 5 years old now, its an HP with Celeron 1.4G processor. Windows XP SP3 installed. All latest windows updates installed. 2 USB ports available. BIOS is HP 68DTD ver F.0A Do I need to update my BIOS from somewhere ? or is this a hardware problem altogether?

  Read the article

• Copying SD Cards with "LaCie d2 Network"

  - by rjstelling

  The LaCie d2 Network has a feature where by you can attach a USB drive and press the blue button at the from and it will copy the drive contents (no computer required). (See this review for more info). USB 2.0 and eSATA ports are also provided but these are not designed for extending the d2 Network's storage. Rather, they allow you to connect portable drives for uploading their data to the d2 Network directly. The process is quite slick, too: just plug in a drive and press the big blue button on the front of the unit to trigger an immediate upload. This copies over everything on the external device and seems ideal for camera use. Is it possible to use an microSD or SD card adapter (like the Kingston MobileLite 9-in-1) and copy the contents of the card? I'm assuming the card reader just "looks like" a normal USB flash drive the computer or (in this case) LaCie d2 Network. Is this assumption correct? Do you know any reason why this won't work?

  Read the article

• How to enable synergy 24800 (or some other port) through firewalld

  - by ndasusers

  After upgrading to Fedora 18, Synergy, the keyboard sharing system was blocked by default. The culprit was firewalld, which happily ignored my previous settings made in the Fedora GUI, backed by iptables. ~]$ ps aux | grep firewall root 3222 0.0 1.2 22364 12336 ? Ss 18:17 0:00 /usr/bin/python /usr/sbin/firewalld --nofork david 3783 0.0 0.0 4788 808 pts/0 S+ 20:08 0:00 grep --color=auto firewall ~]$ Ok, so how to get around this? I did sudo killall firealld for several weeks, but that got annoying every time I rebooted. It was time to look for some clues. There were several one liners, but they did not work for me. They kept spitting out the help text. For example: ~]$ sudo firewall-cmd --zone=internal --add --port=24800/tcp [sudo] password for auser: option --add not a unique prefix Also, posts that clamied this command worked also stated it was temporary, unable to survive a reboot. I ended up adding a file to the config directory to be loaded in on boot. Would anyone be able to have a look at that and see if I missed something? Though synergy works, when I run the list command, I get no result: ~]$ sudo firewall-cmd --zone=internal --list-services ipp-client mdns dhcpv6-client ssh samba-client ~]$ sudo firewall-cmd --zone=internal --list-ports ~]$

  Read the article

• Connect to Postgres remotely, open port 5432 for Postgres in iptables

  - by Victor

  I am trying to connect to Postgres remotely but I need to open port 5432 in iptables. My current iptables configuration is as follows: *filter # Allows all loopback (lo0) traffic and drop all traffic to 127/8 that doesn't use lo0 -A INPUT -i lo -j ACCEPT -A INPUT ! -i lo -d 127.0.0.0/8 -j REJECT # Accepts all established inbound connections -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT # Allows all outbound traffic # You can modify this to only allow certain traffic -A OUTPUT -j ACCEPT # Allows HTTP and HTTPS connections from anywhere (the normal ports for websites) -A INPUT -p tcp --dport 80 -j ACCEPT -A INPUT -p tcp --dport 443 -j ACCEPT # Allows SSH connections # # THE -dport NUMBER IS THE SAME ONE YOU SET UP IN THE SSHD_CONFIG FILE # -A INPUT -p tcp -m state --state NEW --dport 30000 -j ACCEPT # Allow ping -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT # log iptables denied calls -A INPUT -m limit --limit 5/min -j LOG --log-prefix "iptables denied: " --log-level 7 # Reject all other inbound - default deny unless explicitly allowed policy -A INPUT -j REJECT -A FORWARD -j REJECT COMMIT What would I have to add in iptables to open the port? I'm trying to install phppgadmin on a different server to access the postgres database. Thank you.

  Read the article

• Creating a ssh tunnel to transfer files?

  - by Vincent

  For me, networks are a very "opaque" thing, and even with reading a lot of tutorial about SSH, I do not understand how to create a basic tunnel to transfer my files. The configuration is the following : My Computer --[Internet]--> Bridge Machine --[Local Network]--> Final Machine Currently I do the following : 1) Connect to the Bridge Machine with : ssh -X [email protected] 2) Connect to the Final Machine with : ssh -X username@finalmachine 3) I copy the address of files I need (for example .../mydirectory) 4) Then I deconnect from the finalmachine with : exit 5) I copy the files to the bridge : scp -r username@finalmachine:/.../mydirectory . 6) I deconnect from the bridge with : exit 7) I copy the files to my machine : scp -r [email protected]:/.../mydirectory . Which is quite complicated. My question is basic : how to simplify this using a SSH tunnel ? (and please explain me the signification of each command line you write, to understand what each line really do and to avoid to use it like a magical thing. Furthermore if some ports number are used, explain me if I can pick a completely random number or if I have to choose a specific one.)

  Read the article

• Computer Comparison - which is "better"

  - by David Murdoch

  A company I work with recently replaced their old server and gave it to me. Their old server is a Dell PowerEdge 2600. I've been playing with the machine and even installed Windows Server 2008 on it...and it seems to run it pretty well. Here are the specs for the two machines: Dev Machine: AMD Athlon64 3000+ 2.38 GHz (overclocked from 1.8GHz [@ 280x8.5] - it is stable-ish) Memory (RAM): 1x1GB OCZ PC3200 (Dual-Channel) 300GB HD OS: Windows XP Pro (32bit) SuperPi 1M digit test: 40 seconds Dell PowerEdge 2600 Server: Intel Xeon CPU 2.8GHz 2.8GHz Memory (RAM): 512MBx2 (PC2700, not dual channel) 68GB HD (RAID 5) OS: Windows Server 2000 (32bit) SuperPi 1M digit test: 56 seconds [using 1 processor] (Themes and Aero-Flass UI turned off, of course) I use my computer to regularly run Photoshop CS5, Illustrator CS5, Flash CS5, 5 browsers (Chrome, FF, IE, Safari, Opera), iTunes, Visual Studio 2010, and Kaspersky Internet Security 2010 [sometimes simultaneously :-) ]. The SuperPi test has my dev machine coming in about 30% faster than the Server machine...though this could be due to the server running "Vista" with background processes prioritized. Do you think it would be realistic/advantageous for me to move from my dev machine to the Dell PowerEdge 2600? Is it possible to install additional DVD drives/burners on the server? Can I install my internal 300 GB hard drive on the server? Can I add some USB 2.0 ports? Note: I'll probably install Win XP Pro on the dev machine if I do switch. If not, are there any creative and useful way for me to take advantage of this server (with the goal of faster computing)?

  Read the article

• Why does just splitting an Ethernet cable not work?

  - by Sin Jeong-hun

  I thought the Ethernet is logically a one-line communication bus (for argument's sake, I am excluding hubs). All machines attached on the bus hears the same signals and the machines themselves try to avoid collisions by randomly backing off. http://computer.howstuffworks.com/ethernet6.htm If so, why would splitting one Ethernet line from my home router into two and connecting two computers not work? Why do I have to add a switch to it? *What the Internet said would not work. [4 port home router] ------[one Ethernet cable]-----[simple splitter]======[two computers] *What the Internet said I should do [4 port home router] ------[one Ethernet cable]-----[switch]======[two computers] Is this because of the signal degradation (reduced electric current)? Thank you for all the answers! The reason why I did not just use the two ports of my home router is... The 4-port gigabit router is in my room, and I had put a computer in another room (also my room, though). Since a wired network is far more reliable and secure, I had bought a long Ethernet cable and and connected the computer to the router. Now I was thinking about adding another computer to that room. I could buy another long Ethernet cable, but then there will be two cables between the rooms. The one line already is a minor annoyance, so I thought if I could share the one line between the two computers in that room. A switch would work, but it requires power and is a little bit pricey. That is why I wondered why it would not work to simply split the physical Ethernet cable. Apparently I do not completely understand how Ethernet and a switch work. I just have some bit of knowledge I heard in my college class.

  Read the article

• How to install DBD::mysql on OS X Server 10.6?

  - by Zoran Simic

  Trying to install DBD::mysql on OS X Server 10.6 (mac mini server). But I'm missing the mysql headers apparently. Since mysql is already part of OS X Server 10.6, I would like to NOT install anything else (no fink or darwin ports installs), just whatever's needed to get DBD::mysql installed and working. Do you know how I could do that? Do I have to install the headers somewhere? And if so, where? (again: I don't want to install another version of mysql on the box, want to use the version it came with). Is there a way to install DBD::mysql without compiling any C files? This is the error I get (the actual error is much longer, but these are the most meaningful bits, this is the first error reported). Checking if your kit is complete... Looks good Unrecognized argument in LIBS ignored: '-pipe' Note (probably harmless): No library found for -lmysqlclient Multiple copies of Driver.xst found in: /Library/Perl/5.10.0/darwin-thread-multi-2level/auto/DBI/ /System/Library/Perl/Extras/5.10.0/darwin-thread-multi-2level/auto/DBI/ at Makefile.PL line 907 Using DBI 1.611 (for perl 5.010000 on darwin-thread-multi-2level) installed in /Library/Perl/5.10.0/darwin-thread-multi-2level/auto/DBI/ Writing Makefile for DBD::mysql cp lib/DBD/mysql.pm blib/lib/DBD/mysql.pm cp lib/DBD/mysql/GetInfo.pm blib/lib/DBD/mysql/GetInfo.pm cp lib/DBD/mysql/INSTALL.pod blib/lib/DBD/mysql/INSTALL.pod cp lib/Bundle/DBD/mysql.pm blib/lib/Bundle/DBD/mysql.pm gcc-4.2 -c -I/Library/Perl/5.10.0/darwin-thread-multi-2level/auto/DBI -I/usr/include -fno-omit-frame-pointer -pipe -D_P1003_1B_VISIBLE -DSIGNAL_WITH_VIO_CLOSE -DSIGNALS_DONT_BREAK_READ -DIGNORE_SIGHUP_SIGQUIT -DDBD_MYSQL_INSERT_ID_IS_GOOD -g -arch x86_64 -arch i386 -arch ppc -g -pipe -fno-common -DPERL_DARWIN -fno-strict-aliasing -I/usr/local/include -Os -DVERSION=\"4.014\" -DXS_VERSION=\"4.014\" "-I/System/Library/Perl/5.10.0/darwin-thread-multi-2level/CORE" dbdimp.c In file included from dbdimp.c:20: dbdimp.h:22:49: error: mysql.h: No such file or directory dbdimp.h:23:45: error: mysqld_error.h: No such file or directory dbdimp.h:25:49: error: errmsg.h: No such file or directory

  Read the article

• Alternatives to ntbackup

  - by Chris J

  Is anyone aware of any good (for a given value of "good") alternatives to ntbackup? There's a few quirks with ntbackup that I still find odd, and occasionally (and for no obvious reason) ntbackup just doesn't back up - usually complaining about that the wrong tape's inserted even though it's been told to just use the tape that's in the drive regardless. I've experiemented with cygwin's tar and cpio and Win32 ports of these utilities, but I've not had any luck getting them to see the tape device (so if someone does use these utilities to write to a tape device, also be interested to know how). Essentially all I'm looking for is a reliable program that I can tell to back-up a list of locations to the tape, and not to care about anything like formatting tapes, or sticking volume labels on them (and conversely then makes it fairly straightforward to restore off as well). On the flip-side, I don't want something that will attempt to manage our tapes. Don't get me wrong here -- ntbackup can do the job, but its quirks are making look at possible alternatives. Any suggestions? If it's open source, even better.

  Read the article

• configure Squid3 proxy server on Ubuntu with caching and logging

  - by Panshul

  I have a ubuntu 11.10 machine. Installed Squid3. When i configure the squid as http_access allow all, everything works fine. my current configuration mostly default is as follows: 2012/09/10 13:19:57| Processing Configuration File: /etc/squid3/squid.conf (depth 0) 2012/09/10 13:19:57| Processing: acl manager proto cache_object 2012/09/10 13:19:57| Processing: acl localhost src 127.0.0.1/32 ::1 2012/09/10 13:19:57| Processing: acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 ::1 2012/09/10 13:19:57| Processing: acl SSL_ports port 443 2012/09/10 13:19:57| Processing: acl Safe_ports port 80 # http 2012/09/10 13:19:57| Processing: acl Safe_ports port 21 # ftp 2012/09/10 13:19:57| Processing: acl Safe_ports port 443 # https 2012/09/10 13:19:57| Processing: acl Safe_ports port 70 # gopher 2012/09/10 13:19:57| Processing: acl Safe_ports port 210 # wais 2012/09/10 13:19:57| Processing: acl Safe_ports port 1025-65535 # unregistered ports 2012/09/10 13:19:57| Processing: acl Safe_ports port 280 # http-mgmt 2012/09/10 13:19:57| Processing: acl Safe_ports port 488 # gss-http 2012/09/10 13:19:57| Processing: acl Safe_ports port 591 # filemaker 2012/09/10 13:19:57| Processing: acl Safe_ports port 777 # multiling http 2012/09/10 13:19:57| Processing: acl CONNECT method CONNECT 2012/09/10 13:19:57| Processing: http_access allow manager localhost 2012/09/10 13:19:57| Processing: http_access deny manager 2012/09/10 13:19:57| Processing: http_access deny !Safe_ports 2012/09/10 13:19:57| Processing: http_access deny CONNECT !SSL_ports 2012/09/10 13:19:57| Processing: http_access allow localhost 2012/09/10 13:19:57| Processing: http_access deny all 2012/09/10 13:19:57| Processing: http_port 3128 2012/09/10 13:19:57| Processing: coredump_dir /var/spool/squid3 2012/09/10 13:19:57| Processing: refresh_pattern ^ftp: 1440 20% 10080 2012/09/10 13:19:57| Processing: refresh_pattern ^gopher: 1440 0% 1440 2012/09/10 13:19:57| Processing: refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 2012/09/10 13:19:57| Processing: refresh_pattern (Release|Packages(.gz)*)$ 0 20% 2880 2012/09/10 13:19:57| Processing: refresh_pattern . 0 20% 4320 2012/09/10 13:19:57| Processing: http_access allow all 2012/09/10 13:19:57| Processing: cache_mem 512 MB 2012/09/10 13:19:57| Processing: logformat squid3 %ts.%03tu %6tr %>a %Ss/%03>Hs %<st %rm %ru 2012/09/10 13:19:57| Processing: access_log /home/panshul/squidCache/log/access.log squid3 The problem starts when I enable the following line: access_log /home/panshul/squidCache/log/access.log I start to get proxy server is refusing connections error in the browser. on commenting out the above line in my config, things go back to normal. The second problem starts when i add the following line to my config: cache_dir ufs /home/panshul/squidCache/cache 100 16 256 The squid server fails to start. Any suggestions what am I missing in the config. Please help.!!

  Read the article

• Usb device not working properly on a Thinkpad T60

  - by Xavierjazz

  I have just started getting a message that a USB device is not working properly. This is on a new Thinkpad T60 running Windows XP Professional SP3. I have had all devices attached for about 10 days or so. When I go to device manager there is no sign of a problem: everything is working correctly. I am unable to find out which device it is. I searched this forum but the only reference I found was to older computers which may not be Usb2 capable. This is not my problem. Any ideas? Thanks. EDIT: I realized I had a harddrive attached but turned off. Although I could not track down any error messages except the balloon that came up, I have disconnected it and, so far, no messages. We'll see over the next day or two, but this may be the problem. Thanks EDIT: This has not solved the problem. I get the message that one of the USB devices has malfunctioned and it points to "USB root hub (2 ports)" and shows an unused port and an unknown device. However, when I check my device manager, it says that there are no problems, everything is working as it should. ?? EDIT: I now found the event log view and there are 2 types of error messages. They do not relate to the time that I get the balloon. 2 of the 3 are "Ati2mtag" errors and the third is "System Control Manager". Are these related to my problem, and the balloon just pops up randomly? EDIT: well, I'm still having the problem, and have narrowed it down to a malfunctioning device. Thanks to all.

  Read the article

• Unable to get squid working for remote users

  - by Sean

  I am trying to setup squid 3.2.4, but I have not been able to get it working for remote users. Works fine locally. Unable to figure out what I am doing wrong... http_port 3128 transparent ssl-bump generate-host-certificates=on dynamic_cert_mem_cache_size=4MB cert=/usr/share/ssl-cert/myCA.pem refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 acl localnet src 10.0.0.0/8 # RFC 1918 possible internal network acl localnet src 172.16.0.0/12 # RFC 1918 possible internal network acl localnet src 192.168.0.0/16 # RFC 1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines acl SSL_ports port 443 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 # https acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 1025-65535 # unregistered ports acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl CONNECT method CONNECT http_access allow manager localhost http_access deny manager http_access deny !Safe_ports http_access allow localhost http_access allow localnet http_access allow all cache deny all via off forwarded_for off header_access From deny all header_access Server deny all header_access WWW-Authenticate deny all header_access Link deny all header_access Cache-Control deny all header_access Proxy-Connection deny all header_access X-Cache deny all header_access X-Cache-Lookup deny all header_access Via deny all header_access Forwarded-For deny all header_access X-Forwarded-For deny all header_access Pragma deny all header_access Keep-Alive deny all acl ip1 localip 1.1.1.90 acl ip2 localip 1.1.1.91 acl ip3 localip 1.1.1.92 acl ip4 localip 1.1.1.93 acl ip5 localip 1.1.1.94 tcp_outgoing_address 1.1.1.90 ip1 tcp_outgoing_address 1.1.1.91 ip2 tcp_outgoing_address 1.1.1.92 ip3 tcp_outgoing_address 1.1.1.93 ip4 tcp_outgoing_address 1.1.1.94 ip5 tcp_outgoing_address 1.1.1.90

  Read the article

• Media Center - TV constantly pauses 1/2 second then plays 1 second

  - by Bob

  I have a problem watching TV in Media Center. The TV constantly pauses 1/2 second then plays 1 second, pauses 1/2 second, plays 1 second - it is constant and does not vary. I know the problem is Media Center because I can use Pinnacle's TVCenterPro and there is no skipping/pausing. I was using cable, and switched to DirecTV (satellite). Trying to do "Set up TV signal" in Media Center seems to be what broke it. I get an error "IR Hardware not detected." I can use the remote to "try again" - so the IR hardware works fine (Media Center's remote/sensor). I tried plugging the IR Blaster into both ports, and I tried a different USB port for the IR receiver. I can't complete the setup. Media Center was playing it okay before I tried to run setup. (I ran setup to try to do recording with Media Center.) Pinnacle PCTV 800i HD PCI card, ATI Radeon HD 3200 Graphics, Windows XP SP3 Media Center Edition, AMD Athlon Dual Core 2.5 GHz, 1.75 GB RAM.

  Read the article

• Using a Linksys Wireless- G Broadband Router for a Wireless Antenna/Adapter?

  - by Alex

  (Warning: I'm not too computer-smart). Just moved fm a home where I used ATT DSL to a home w/ Comcast Cable for internet. Old home had the DSL ethernet wired to my only desktop w/ a 2Wire router for my wireless signal for the laptops. In the new home the signal comes fm cable via a Netgear(300) wireless router (remotely located) & works fine for my laptops. After searching with the network software, my desktop (can't be ethernet wired cuz of location) detects no wireless signal. Desktop is a 2 yr old HP p6311f Pavilion (Windows 7). Can't seem to detect any wireless hardware (ant/adaptr). Maybe I don't have the ability & need to buy a USB wireless antenna? Would the Pavilion come w/ wireless capability out of the box, maybe something inside the tower? No antenna on back. I happen to have a Linksys Wireless router which I plugged in to the desktop (trying both internet & shared ports) & noticed signal action on the router front panel. No internet on desktop though. Can I use this as an antenna for the desktop? Thanks & sorry if my solution is an easy one I'm just missing. Just want internet on the desktop.

  Read the article

• Possible to IPSec VPN Tunnel Public IP Addresses?

  - by caleban

  A customer uses an IBM SAS product over the internet. Traffic flows from the IBM hosting data center to the customer network through Juniper VPN appliances. IBM says they're not tunneling private IP addresses. IBM says they're tunneling public IP addresses. Is this possible? What does this look like in the VPN configuration and in the packets? I'd like to know what the source/destination ip/ports would look like in the encrypted tunneled IPSec Payload and in the IP packet carrying the IPSec Payload. IPSec Payload: source:1.1.1.101:1001 destination:2.2.2.101:2001 IP Packet: source:1.1.1.1:101 destination:2.2.2.1:201 Is it possible to send public IP addresses through an IPSec VPN tunnel? Is it possible for IBM to send a print job from a server on their network using the static-nat public address over a VPN to a printer at a customer network using the printer's static-nat public address? Or can a VPN not do this? Can a VPN only work with interesting traffic from and to private IP addresses?

  Read the article

• Why does USB thumb drive screw up boot sequence?

  - by Carl B

  I am looking for understanding to a boot issue. I have at times had some files and such that I save and retrieve from my thumb drive. I use the front panel as it is nice and easy to get to and I typically power down my system nightly. If I forget to pull the drive and power on the system, it becomes the first bootable device. As there is no OS on the USB Drive I get the BOOTMGR is missing press CTRL+ALT+DELETE. When I go into BIOS to see Boot sequence, there’s the thumb drive up top, DVD drive is missing and not found in the list of devices. All of the hard drives are next in line. When I pull the USB drive, and reboot, everything is back to normal. Old boot sequence is in place, DVD drive right where it should be and no issues. So why does this happen with a USB drive in port at boot up? If it can’t be booted from, shouldn’t the next drive be attempted? Note: This happens when the thumb drive is plugged into a USB port on the front panel. It does not seem to happen on rear panel ports.

  Read the article

• Force spin-down of external hard-drive on linux (raspberry pi)

  - by user258346

  I'm currently setting up a home-server using a Raspberry Pi with an external hard-disk connected via usb. However, my hard-drive will never spin down when being idle. I tried already the hints provided at raspberrypi.org ... without any success. 1.) sudo hdparm -S5 /dev/sda returns /dev/sda: setting standby to 5 (25 seconds) SG_IO: bad/missing sense data, sb[]: 70 00 04 00 00 00 00 0a 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 2.) sudo hdparm -y /dev/sda returns /dev/sda: issuing standby command SG_IO: bad/missing sense data, sb[]: 70 00 04 00 00 00 00 0a 00 00 00 00 44 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...and 3.) sudo sdparm --flexible --command=stop /dev/sda returns /dev/sda: HDD 1234 ... without spin-down of the drive. I use the following hardware: Inateck FDU3C-2 dual Ports USB 3.0 HDD docking station Western Digital WD10EZRX Green 1TB Is it possible, that the sent spin-down-signals are somewhere overwritten/lost/ignored?

  Read the article

• Port Forwarding(?) TD-W8961nd

  - by rich

  I have a bit of a weird internet setup. I am connected via a decent WiFi connection (from work) which I pick up using a Buffalo Airstation Wireless-G box. This simply picks up the signal and gives me 4 ethernet ports to connect to. That's all fine and works as it should. I also have a TP LINK TD-W8961nd router which used to be connected to the Airstation via an ethernet cable so I could essentially have WiFi access in my house. To cut a long story short I can't remember how the hell I got it to work and I can't find the notes I scribbled down on how to do it. I'm pretty sure I need to tell the router what ip to pick up the internet connection from and have the local wifi as a seperate network. How the hell I do that I have no idea right now. Can anyone give me some advice on this? If you need more information ask and I will be able to do so. Cheers in advance. edit I'm in work at the moment so I can't give 100% details but I will be able to later on.

  Read the article

• NFS high CPU usage

  - by user269836

  Hello, I have a very strange issue. I have next server: Intel(R) Xeon(TM) MP CPU 3.16GHz cat /proc/cpuinfo | grep proce | wc -l 8 free -m total used free shared buffers cached Mem: 28203 27606 596 0 10789 9714 -/+ buffers/cache: 7103 21100 Swap: 24695 0 24695 RAID card *-storage description: RAID bus controller product: MegaRAID vendor: LSI Logic / Symbios Logic physical id: 7 bus info: pci@0000:13:07.0 logical name: scsi2 version: 01 width: 32 bits clock: 66MHz capabilities: storage pm bus_master cap_list rom configuration: driver=megaraid latency=32 resources: irq:134 memory:d8ff0000-d8ffffff(prefetchable) memory:df600000-df60ffff(prefetchable) HDD: 10x148Gb SCSI U320 15k - RAID5 /dev/sdb1 807G 674G 93G 88% /storage /dev/sdb1 /storage ext4 defaults,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,noatime,nodiratime,noacl,errors=remount-ro 0 1 network cards ethtool -i eth0 driver: tg3 version: 3.116 firmware-version: 5704-v3.36, ASFIPMIc v2.36 bus-info: 0000:10:02.0 ethtool -i eth1 driver: tg3 version: 3.116 firmware-version: 5704-v3.36, ASFIPMIc v2.36 bus-info: 0000:10:02.0 ifconfig bond0 Link encap:Ethernet HWaddr 00:0f:1f:ff:d6:4d inet addr:192.168.15.71 Bcast:192.168.15.255 Mask:255.255.255.0 inet6 addr: fe80::20f:1fff:feff:d64d/64 Scope:Link UP BROADCAST RUNNING MASTER MULTICAST MTU:1500 Metric:1 RX packets:1062818202 errors:0 dropped:3918 overruns:0 frame:0 TX packets:1041317321 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:10000 RX bytes:258867684559 (241.0 GiB) TX bytes:396569192650 (369.3 GiB) this server running only nfs-kernel-server uname -a Linux nas2-backup 2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 x86_64 GNU/Linux Debian 6. What do I have, once per day or two, LA goes up, it can be reached around LA: 40 but if I do: nfs-kernel-server restart. Every thing is OK. But on the next day or a little bit later, LA goes up again. Servers are connected to d-link dgs 1016d with 24 GBits ports. I have tried everything to find out what the problem is. Why it's happening, but still I can not resolve this issue. Any ideas on what is happening here?

  Read the article

• Correct way to set up office network - 8 workstations, a file server and a staging server

  - by naunu

  Our office had this old school windows 2003 domain setup, our server caught fire, and now we are looking to do it right from scratch. Here is what we need: 5 PC and 3 Mac workstations for web development, they will each have WAMP/MAMP setup on them, managed by their developers. We will have a file server for assets, and a LAMP server with an external IP for staging. Here is what we have to work with: 5 IP addresses, brand new PC file server with windows 2008 SE, D-Link DSS-16+ 16 port switch, belkin 5 port wireless router, cable modem with 4 ports. How I have it set up now (this is a temporary makeshift setup): Cable modem = LAMP server, wireless router Wireless router = Switch = All of the workstations and file server (setup as a workgroup). We have noticed our internet is very slow with us all plugged in to the switch, and the switch plugged in to the router. I am not positive, but I think it is because our router does not have NAT. We are also having problems with the MACs connection to the network drive - it keeps disconnecting. I want this done right, and we have a ~$600 budget to buy anything else we need. Does anybody have any advice for me? Should I set up a domain or workgroup?

  Read the article

• VNC failure on Xen

  - by BCable

  The following config works and creates a good VM in Xen: # Kernel Setup kernel = "/boot/vmlinuz-2.6.18.8-xenU" # Memory memory = "256" # Disk disk = [ "file:/opt/xen/domains/110/sda1.img,sda1,w", "file:/opt/xen/domains/110/swap.img,sda2,w" ] # container name name = "110" hostname = "boo" # Networking vif = ["type=ieomu, bridge=xenbr0"] # VNC vnc = 1 #vfb = [ 'type=vnc,vncdisplay=2,vnclisten=0.0.0.0,vncpasswd=110' ] # Behavior Settings root = "/dev/sda1" extra = "fastboot" But when I uncomment the VFB line, I get the following error after it hangs for at least 30 seconds: [root@customer 110]# xm create boo.cfg Using config file "./boo.cfg". Error: Device 0 (vkbd) could not be connected. Hotplug scripts not working. Any ideas? Part two of this question: Sometimes it actually works, and a port is opened. When this happens, nmap shows the VNC ports open and I can connect via the VNC client, but it just hangs at "Connection established." and no VNC display shows up. I've tried multiple VNC clients (TightVNC, TightVNC Java Console, RealVNC), but they all fail to connect. Does VNC through Xen require X to be started in order to function? I was under the impression that it would show the console screen, so I'm confused as to why all these issues are occurring. Thanks!

  Read the article

• Active directory Kerberos OSX problems

  - by Temotodochi

  I'll try to keep this short, but informative. I'm currently unable to bind OSX lion (10.7.4) machines to our AD. OSX kerberos (heimdal) is unable to locate the KDC service. However i can bind linux & windows machines to the AD without any problems in the same network AD controls the domain DNS and all the relevant _kerberos._tcp.x.domain.com and _kpasswd SRV DNS records are there and resolve fine when tried from OSX machines. Defined ports are open for service and manually accessible from OSX. When i try kinit in the OSX, i can get the first auth through (wrong passwords fail instantly), but when supplied with correct password, kinit fails after some waiting with "unable to reach KDC". All machines run NTP and have correct time. During testing, network is not firewalled between the machines Linux and windows machines have no problems whatsoever I have tried with and without /etc/krb5.conf - OSX by default does not need it in the krb5.conf i used a working config from one of our linux machines. dsconfigad fails with simple "connection failed to the directory server" I'm a bit baffled with this. OSX is like the KDC is nowhere to be found and at the same time my test machines with windows 7 and some linux (centos 6 & debian 6) machines have no problems whatsoever. Same network, same configurations. I'm missing some vital piece of configuration somewhere, and i can't find out what it is.

  Read the article

• OpenSwan (IPSEC) on Fedora 13 with Snow Leopard as a client

  - by sicn

  I recently installed OpenSwan on my Fedora 13 machine. I want to use it to connect with Mac OS X with L2TP over IPSEC, unfortunately I am already stuck on the IPSEC-negotation part. My server is running behind a NATted firewall so my external IP differs from the server's IP. The server has a fixed IP on the network and the same is almost always valid for the clients (they are usually behind a NATted firewall). I installed OpenSwan on Fedora 13 and have following configuration: config setup protostack=netkey nat_traversal=yes virtual_private=%v4:10.0.0.0/8,%v4:192.168.0.0/16,%v4:172.16.0.0/12 oe=off nhelpers=0 conn L2TP-PSK-NAT rightsubnet=vhost:%priv also=L2TP-PSK-noNAT conn L2TP-PSK-noNAT authby=secret pfs=no auto=add keyingtries=3 rekey=no ikelifetime=8h keylife=1h type=transport left=my.servers.external.ip leftprotoport=17/1701 right=%any rightprotoport=17/0 IPSEC starts fine and listens to UDP 500 and 4500. These two ports are opened in the firewall and are forwarded fine to the server. In my /etc/ipsec.secrets file I have my.servers.external.ip %any: "LongAndDifficultPassword" And finally in my sysctl.conf (the redirect-entries are there because OpenSwan was strongly protesting about send/accept_redirects being active) I have net.ipv4.ip_forward = 1 net.ipv4.conf.all.send_redirects = 0 net.ipv4.conf.all.accept_redirects = 0 Running "ipsec verify" gives me "all greens" (except Opportunistic Encryption Support, which is DISABLED), however, when trying to connect my Mac gives me following in the logs: Nov 1 19:30:28 macbook pppd[4904]: pppd 2.4.2 (Apple version 412.3) started by user, uid 1011 Nov 1 19:30:28 macbook pppd[4904]: L2TP connecting to server 'my.servers.ip.address' (my.servers.ip.address)... Nov 1 19:30:28 macbook pppd[4904]: IPSec connection started Nov 1 19:30:28 macbook racoon[4905]: Connecting. Nov 1 19:30:28 macbook racoon[4905]: IKE Packet: transmit success. (Initiator, Main-Mode message 1). Nov 1 19:30:31 macbook racoon[4905]: IKE Packet: transmit success. (Phase1 Retransmit). Nov 1 19:30:38: --- last message repeated 2 times --- Nov 1 19:30:38 macbook pppd[4904]: IPSec connection failed Any ideas at all?

  Read the article

• apache2: ssl_error_rx_record_too_long when visiting port 80?

  - by John

  Hi, I have an Ubuntu 10 x64 server edition machine. I got a second IP and configured /etc/network/interfaces like so (actual IPs and gateways removed): auto lo iface lo inet loopback #iface eth0 inet dhcp auto eth0 auto eth0:0 iface eth0 inet static address [ my first IP ] netmask 255.255.255.0 gateway [ my first gateway ] iface eth0:0 inet static address [ my second IP ] netmask 255.255.255.0 gateway [ my second gateway ] /etc/apache2/ports.conf: Listen 80 NameVirtualHost [ my first IP ]:80 NameVirtualHost [ my second IP ]:80 <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 NameVirtualHost [ my first IP - some site is running SSL successfully using it ]:443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> /etc/apache2/sites-enabled/mysite.conf: <VirtualHost [my second IP ]:80> ServerName mysite.com Include /var/www/mysite.com/djangoproject/apache/django.conf </VirtualHost> Then when visiting http[mysite].com:80 or http[mysite].com (:// removed because serverfault doesn't allow me to post hyperlinks), I get: An error occurred during a connection to [mysite].com. SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long) My guess is that the configuration file is not being picked up, and apache is therefore looking for the default-ssl file, which is not in conf-enabled. If I were to configure that file properly, it seems I would successfully connect to whatever default directory is specified in the default-ssl file. But I want to connect to my website. Any ideas? Thanks in advance!

  Read the article

• What Wireless Router/ADSL Modem to get? N-band a must!!

  - by JJarava

  I'm looking for a Dual-N band Router OR ADSL Gateway and I'd like some recommendations. Situation: I have a 802.11b/g ADSL gateway provided by my telco, but the WIFI signal won't cover all the house (especially the living-room, so my tv-connected Mac Mini has poor to no internet access). So I'm looking to either replace the DSL modem with a N-enabled one, or to add a Router to the mix. I've had a modem+router setup for many years, and I know the advantatges (double NAT, double FW = more security) and issues (more complex to troubleshoot, two possible points of failure), so I'd rather live with a single (ADSL Gateway) device, if possible. Requirements: Dual-N Band (300 Mbs WIFI) 1 GB Ethernet ports ADSL2+ support (if it's a ADSL gateway, which would be desirable) "Best" range and speed possible Nice to have: USB port to share disks/printers on the network Media streaming I've been a long time user of Linksys, so googling around I found the WRT610N (http://www.linksysbycisco.com/US/en/products/WRT610N) for a "Pure Router" perspective, and it's one of those that Linksys styles "N++" (http://www.linksysbycisco.com/US/en/promo/Promotion-Go-Wireless?stepname=Promotion-Step-Go-Wireless-High-Performance) But I haven't been able to find similar "ADSL" gateways. I've found the WAG320N, but there is little to no info in the Linksys site (i.e., i don't know if it's Dual Band, or if it has GB ethernet) Any opinions/recommendations of other products/suggestions are more than welcome.

  Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >