Search Results

Search found 21955 results on 879 pages for 'self host'.

Page 86/879 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

• How do you get the IP addresses of KVM guests that are using a Bridge Network Device from the KVM host

  - by slm

  Does anyone know of a way using KVM to find out the IP addresses of KVM guests that are using a bridge interface (br0) through the KVM host? Currently I have br0 setup with a single NIC (eth0) included. The KVM host is a system running CentOS 5.6 in case that matters. The guests are also running CentOS 5.6. BTW, the guests do not just show up in the KVM host's arp table, I'm looking for better solutions and/or leads.

  Read the article

• USB Hub and Ubuntu

  - by aserwin

  I have a powered 7 port hub connected to my Ubuntu box and it does nothing. The devices (zip drive and web cam) work direct, but aren't recognized through the hub. This worked fine in Windows 7. I can't prove it is the OS because this is a new motherboard and processor. Any advice? EDIT : Output from lsusb -v Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:12.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0503 highspeed power enable connect Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:13.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:16.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0001 Self Powered Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:12.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:13.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 5 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Port 5: 0000.0100 power Device Status: 0x0001 Self Powered Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:14.5 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0001 Self Powered Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed (or root) hub bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0001 1.1 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic ohci_hcd iProduct 2 OHCI Host Controller iSerial 1 0000:00:16.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0002 No power switching (usb 1.0) Ganged overcurrent protection bPwrOn2PwrGood 2 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0303 lowspeed power enable connect Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0001 Self Powered Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 idVendor 0x1d6b Linux Foundation idProduct 0x0002 2.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:02:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0001 Self Powered Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 3.02 iManufacturer 3 Linux 3.2.0-32-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:02:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 31 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 bMaxBurst 0 Hub Descriptor: bLength 12 bDescriptorType 42 nNbrPorts 2 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere bHubDecLat 0.0 micro seconds wHubDelay 0 nano seconds DeviceRemovable 0x00 Hub Port Status: Port 1: 0000.02a0 5Gbps power Rx.Detect Port 2: 0000.02a0 5Gbps power Rx.Detect Binary Object Store Descriptor: bLength 5 bDescriptorType 15 wTotalLength 15 bNumDeviceCaps 1 SuperSpeed USB Device Capability: bLength 10 bDescriptorType 16 bDevCapabilityType 3 bmAttributes 0x00 Latency Tolerance Messages (LTM) Supported wSpeedsSupported 0x0008 Device can operate at SuperSpeed (5Gbps) bFunctionalitySupport 3 Lowest fully-functional device speed is SuperSpeed (5Gbps) bU1DevExitLat 3 micro seconds bU2DevExitLat 2047 micro seconds Device Status: 0x0001 Self Powered Bus 001 Device 002: ID 04a9:1709 Canon, Inc. PIXMA MP150 Scanner Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x04a9 Canon, Inc. idProduct 0x1709 PIXMA MP150 Scanner bcdDevice 1.08 iManufacturer 1 Canon iProduct 2 MP150 iSerial 3 20BC24 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 62 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 2mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 255 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x07 EP 7 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x88 EP 8 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x89 EP 9 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 11 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 007 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x046d Logitech, Inc. idProduct 0xc517 LX710 Cordless Desktop Laser bcdDevice 38.10 iManufacturer 1 Logitech iProduct 2 USB Receiver iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 59 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 98mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 1 Keyboard iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 59 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 1 Boot Interface Subclass bInterfaceProtocol 2 Mouse iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.10 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 177 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Device Status: 0x0000 (Bus Powered) This is with the powered hub plugged in.

  Read the article

• Mounting with Nautilus works but fstab gives "Host is down" error?

  - by Annan

  I'm connecting to my university's VPN so I can connect to the network drive. The VPN seems to be working fine and I can connect to the drive by typing the address into Nautilus and entering my login details: smb://139.___.___.140/home However, this fstab entry doesn't work: //139.___.___.140/home /media/___ cifs domain=CS,username==___,password=___,uid=sai,gid=sai 0 0 Nor does manually mounting it: sudo mount -t cifs //139.___.___.140/home /media/___ -o domain=CS,username=___,password=___,uid=sai,gid=sai,user The only error it gives is: mount error(112): Host is down Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) It's obvious the host isn't down since I can view the share from Nautilus. Why is Nautilus mounting it fine but not the normal mount command? What could cause this error?

  Read the article

• Ubuntu 11.10 - Everytime i am trying to connect to my box using SSH, its failing not connecting

  - by YumYumYum

  From any other PC doing SSH to my Ubuntu 11.10,is failing. Even the SSH is running: Other PC: retrying over and over $ ping 192.168.0.128 PING 192.168.0.128 (192.168.0.128) 56(84) bytes of data. From 192.168.0.226 icmp_seq=1 Destination Host Unreachable From 192.168.0.226 icmp_seq=2 Destination Host Unreachable From 192.168.0.226 icmp_seq=3 Destination Host Unreachable From 192.168.0.226 icmp_seq=4 Destination Host Unreachable $ sudo service iptables stop Stopping iptables (via systemctl): [ OK ] $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] Connection closed by 192.168.0.128 $ ssh [email protected] [email protected]'s password: Connection closed by UNKNOWN $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host $ ssh [email protected] ssh: connect to host 192.168.0.128 port 22: No route to host Follow up: -- checked cable -- using cable tester and other detectors -- no problem found in cable -- used random 10 cables -- adapter is not broken -- checked it using circuit tester by opening the system (card is new so its not network adapter card problem) -- leds are OK showing -- used LiveCD and did same ping test was having same problem -- disabled ipv6 100% to make sure its not the cause -- disabled iptables 100% so its also not the issue -- some more info $ sudo killall dnsmasq -- did not solved the problem -- -- like many other Q/A was suggesting this same --- $ iptables --list Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination $ netstat -nr Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 $ ssh -vvv [email protected] OpenSSH_5.6p1, OpenSSL 1.0.0j-fips 10 May 2012 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to 192.168.0.128 [192.168.0.128] port 22. debug1: Connection established. debug3: Not a RSA1 key file /home/sun/.ssh/id_rsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/sun/.ssh/id_rsa type 1 debug1: identity file /home/sun/.ssh/id_rsa-cert type -1 debug1: identity file /home/sun/.ssh/id_dsa type -1 debug1: identity file /home/sun/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p1 Debian-7ubuntu1 debug1: match: OpenSSH_5.8p1 Debian-7ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: [email protected],[email protected],[email protected],[email protected],ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 118/256 debug2: bits set: 539/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: host 192.168.0.128 filename /home/sun/.ssh/known_hosts debug3: check_host_in_hostfile: match line 139 debug1: Host '192.168.0.128' is known and matches the RSA host key. debug1: Found key in /home/sun/.ssh/known_hosts:139 debug2: bits set: 544/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/sun/.ssh/id_rsa (0x213db960) debug2: key: /home/sun/.ssh/id_dsa ((nil)) debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/sun/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/sun/.ssh/id_dsa debug3: no such identity: /home/sun/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: debug3: packet_send2: adding 64 (len 60 padlen 4 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). Authenticated to 192.168.0.128 ([192.168.0.128]:22). debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug1: Sending environment. debug3: Ignored env ORBIT_SOCKETDIR debug3: Ignored env XDG_SESSION_ID debug3: Ignored env HOSTNAME debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE_PID debug3: Ignored env IMSETTINGS_INTEGRATE_DESKTOP debug3: Ignored env GPG_AGENT_INFO debug3: Ignored env TERM debug3: Ignored env HARDWARE_PLATFORM debug3: Ignored env SHELL debug3: Ignored env DESKTOP_STARTUP_ID debug3: Ignored env HISTSIZE debug3: Ignored env XDG_SESSION_COOKIE debug3: Ignored env GJS_DEBUG_OUTPUT debug3: Ignored env WINDOWID debug3: Ignored env GNOME_KEYRING_CONTROL debug3: Ignored env QTDIR debug3: Ignored env QTINC debug3: Ignored env GJS_DEBUG_TOPICS debug3: Ignored env IMSETTINGS_MODULE debug3: Ignored env USER debug3: Ignored env LS_COLORS debug3: Ignored env SSH_AUTH_SOCK debug3: Ignored env USERNAME debug3: Ignored env SESSION_MANAGER debug3: Ignored env GIO_LAUNCHED_DESKTOP_FILE debug3: Ignored env PATH debug3: Ignored env MAIL debug3: Ignored env DESKTOP_SESSION debug3: Ignored env QT_IM_MODULE debug3: Ignored env PWD debug1: Sending env XMODIFIERS = @im=none debug2: channel 0: request env confirm 0 debug1: Sending env LANG = en_US.utf8 debug2: channel 0: request env confirm 0 debug3: Ignored env KDE_IS_PRELINKED debug3: Ignored env GDM_LANG debug3: Ignored env KDEDIRS debug3: Ignored env GDMSESSION debug3: Ignored env SSH_ASKPASS debug3: Ignored env HISTCONTROL debug3: Ignored env HOME debug3: Ignored env SHLVL debug3: Ignored env GDL_PATH debug3: Ignored env GNOME_DESKTOP_SESSION_ID debug3: Ignored env LOGNAME debug3: Ignored env QTLIB debug3: Ignored env CVS_RSH debug3: Ignored env DBUS_SESSION_BUS_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env WINDOWPATH debug3: Ignored env XDG_RUNTIME_DIR debug3: Ignored env DISPLAY debug3: Ignored env G_BROKEN_FILENAMES debug3: Ignored env COLORTERM debug3: Ignored env XAUTHORITY debug3: Ignored env _ debug2: channel 0: request shell confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel_input_status_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: shell request accepted on channel 0 Welcome to Ubuntu 11.10 (GNU/Linux 3.0.0-12-generic x86_64) * Documentation: https://help.ubuntu.com/ 297 packages can be updated. 92 updates are security updates. New release '12.04 LTS' available. Run 'do-release-upgrade' to upgrade to it. Last login: Fri Jun 8 07:45:15 2012 from 192.168.0.226 sun@SystemAX51:~$ ping 19<--------Lost connection again-------------- Tail follow: -- dmesg is showing a very abnormal logs, like Ubuntu is automatically bringing the eth0 up, where eth0 is getting also auto down. [ 2025.897511] r8169 0000:02:00.0: eth0: link up [ 2029.347649] r8169 0000:02:00.0: eth0: link up [ 2030.775556] r8169 0000:02:00.0: eth0: link up [ 2038.242203] r8169 0000:02:00.0: eth0: link up [ 2057.267801] r8169 0000:02:00.0: eth0: link up [ 2062.871770] r8169 0000:02:00.0: eth0: link up [ 2082.479712] r8169 0000:02:00.0: eth0: link up [ 2285.630797] r8169 0000:02:00.0: eth0: link up [ 2308.417640] r8169 0000:02:00.0: eth0: link up [ 2480.948290] r8169 0000:02:00.0: eth0: link up [ 2824.884798] r8169 0000:02:00.0: eth0: link up [ 3030.022183] r8169 0000:02:00.0: eth0: link up [ 3306.587353] r8169 0000:02:00.0: eth0: link up [ 3523.566881] r8169 0000:02:00.0: eth0: link up [ 3619.839585] r8169 0000:02:00.0: eth0: link up [ 3682.154393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 3899.866854] r8169 0000:02:00.0: eth0: link up [ 4723.978269] r8169 0000:02:00.0: eth0: link up [ 4807.415682] r8169 0000:02:00.0: eth0: link up [ 5101.865686] r8169 0000:02:00.0: eth0: link up How do i fix it? -- http://ubuntuforums.org/showthread.php?t=1959794 -- apt-get install openipml openhpi-plugin-ipml

  Read the article

• Will it hurt my website's SEO friendliness if I host a french targetted website at, let's say, godaddy.com?

  - by Suraj

  Hi guys, I have read that the server location is important for a website to be SEO friendly. I am planning to build a website from scratch which is targetted mainly to french audience (in france), but I am planning to host the web site at godaddy.com. My concern is will it hurt the website SEO friendliness? Or do you recommend me to host the website in france itself? I have also read that I need to have a static IP Address. If it's true, can anyone explain me for what reason? Can anyone suggest me some good web hosting companies, prefereable in france? Thanks in advance!

  Read the article

• Can I set up a VM Host's drives to appear as if they belong to the VM OS?

  - by Sinaesthetic

  A couple things. I added two of the host drives to the shared drives area of the VM. Neither of them show up in the VM's OS. What I actually would like to do is configure two of these drives that are on the host OS to appear as if they are on the VM. So that I can share them through the VM. Sounds wonkey, I know. The VM is Windows Server 2008 and the Host is Mac OSX Lion. I would like to host my media drives through windows server rather than over OSX as I have nothing but problems. I'm not sure if this is possible. Any input?

  Read the article

• DNS entries for OCS 2007 R2 basic deploy

  - by Anero

  I'm doing a test deploy on a Lab with 3 VMs: TEST-DC: DC / DHCP / DNS / Root CA (Joined to TEST.AD Domain) TEST-CS: OCS Front End (Joined to TEST.AD Domain - IP: 10.0.128.1) TEST-EDGES: OCS Edge Server (Joined to Workgroup: EDGE-WKG - Internal IP: 10.0.128.3, External IPs: 192.168.129.12 - Access Edge Server, 192.168.129.13 - Web Conferencing, 192.168.129.14 - A/V) I can login with the Communicator Client from within computers in the domain (using [email protected]) and even the Automatic Sign-In works as expected. Nevertheless, I cannot login neither from within machines in the domain nor from outside the domain using [email protected]. I'm pretty sure it is a DNS related issue, so I'm including below a list of the entries. DNS Entries on TEST-DC: Forward Lookup Zones TEST.AD sip.test.ad (Host A). IP Address: 10.0.128.1 sipinternal.test.ad (Host A). IP Address: 10.0.128.1 sipexternal.test.ad (Host A). IP Address: 10.0.128.3 _sipinternaltls._tcp.test.ad (Service Location SRV). Port: 5061. Host: sipinternal.test.ad _sipinternal._tcp.test.ad (Service Location SRV). Port: 5061. Host: sipinternal.test.ad _sip._tcp.test.ad (Service Location SRV). Port: 5061. Host: sipexternal.test.ad _sipfederationtls._tcp.test.ad (Service Location SRV). Port: 5061. Host: sipexternal.test.ad _sip._tls.test.ad (Service Location SRV). Port: 443. Host: sipexternal.test.ad TEST.COM sip.test.com (Host A). IP Address: 10.0.128.1 sipinternal.test.com (Host A). IP Address: 10.0.128.1 sipexternal.test.com (Host A). IP Address: 10.0.128.3 _sipinternaltls._tcp.test.com (Service Location SRV). Port: 5061. Host: sipinternal.test.com _sipinternal._tcp.test.com (Service Location SRV). Port: 5061. Host: sipinternal.test.com _sip._tcp.test.com (Service Location SRV). Port: 5061. Host: sipexternal.test.com _sip._tls.test.ad (Service Location SRV). Port: 443. Host: sipexternal.test.ad Validation Errors OCS Front End Edge Server I ran the OCS 2007 Automatic Sign-In Troubleshooting and all DNS entries for both TEST.AD and TEST.COM are reported to be OK. What am I missing?

  Read the article

• How to connect to the guest console via SSH without being admin on host?

  - by Sorin Sbarnea

  How can someone connect to a VM console via SSH, without being an admin on VM-host. This means that you should be able to see the guest boot screen and grub menu in a ssh session. That's important because in some cases you may need to fix the VM without having access to the VM-host admin console. Mainly this is about how you can have your own VM-guest which you can fully control but without having access to VM-host.

  Read the article

• Application base [my path to install here] for host [hostnamehere] does not exist or is not a directory

  - by Hyposaurus

  I am trying to start a new installation of tomcat7 (on arch Linux). I have everything configured how I normally would but I am running into the problem described in the title. This means that tomcat starts but nothing in that host gets deployed. My server and host file: <Host name="localcity" appBase="/home/gary/Sites/localcity/" autoDeploy="true" unpackWARs="false"> </Host> And the directory it is in drwxrwxr-x 4 doug tomcat 4096 Apr 15 11:52 . drwx------ 33 gary users 4096 Apr 15 20:40 .. drwxrwxr-x 2 tomcat tomcat 4096 Apr 15 20:40 localcity drwx------ 2 gary users 4096 Mar 31 10:10 lod It looks like other installations I have, but I am not sure what the problem is.

  Read the article

• Unable to add host running ubuntu for nagios monitoring?

  - by karthick87

  I am unable to add ubuntu server in nagios monitoring. I am getting "CHECK_NRPE: Socket timeout after 40 seconds." error for few services "CPU Load, Cron File Check, Current Users, Disk Check, NTP Daemon, Time Check, Total Processes, Zombie Processes". Please find the snapshot for the same below, Details: Installed nrpe plugin in ubuntu host. On running the below command from remote host running ubuntu (not nagios server) am getting the following output, root@ubuntu-cacher:~# /usr/local/nagios/libexec/check_nrpe -H localhost NRPE v2.13 But in nagios server i am getting "CHECK_NRPE: Socket timeout after 40 seconds." error. Additional Information: Am running nrpe under xinetd, when i execute the following command i dont get any output, root@ubuntu-cacher:~# netstat -at | grep nrpe But getting the following output when checking, root@ubuntu-cacher:~# netstat -ant|grep 5666 tcp 0 0 0.0.0.0:5666 0.0.0.0:* LISTEN tcp 0 0 172.29.*.*:5666 172.29.*.*:33693 ESTABLISHED tcp 0 0 172.29.*.*:5666 172.29.*.*:33692 ESTABLISHED

  Read the article

• Duplicity can't connect to CloudFiles "Network is unreachable"

  - by jwandborg

  Whenever I click "Backup now" in the Backup GUI, the smaller "Back Up" window opends, and after a while I get the following error message: Traceback (most recent call last): File "/usr/bin/duplicity", line 1359, in with_tempdir(main) File "/usr/bin/duplicity", line 1342, in with_tempdir fn() File "/usr/bin/duplicity", line 1202, in main action = commandline.ProcessCommandLine(sys.argv[1:]) File "/usr/lib/python2.7/dist-packages/duplicity/commandline.py", line 942, in ProcessCommandLine globals.backend = backend.get_backend(args[0]) File "/usr/lib/python2.7/dist-packages/duplicity/backend.py", line 156, in get_backend return _backends[pu.scheme](pu) File "/usr/lib/python2.7/dist-packages/duplicity/backends/cloudfilesbackend.py", line 70, in __init__ self.container = conn.create_container(container) File "/usr/lib/python2.7/dist-packages/cloudfiles/connection.py", line 250, in create_container response = self.make_request('PUT', [container_name]) File "/usr/lib/python2.7/dist-packages/cloudfiles/connection.py", line 189, in make_request response = retry_request() File "/usr/lib/python2.7/dist-packages/cloudfiles/connection.py", line 182, in retry_request self.connection.request(method, path, data, headers) File "/usr/lib/python2.7/httplib.py", line 955, in request self._send_request(method, url, body, headers) File "/usr/lib/python2.7/httplib.py", line 989, in _send_request self.endheaders(body) File "/usr/lib/python2.7/httplib.py", line 951, in endheaders self._send_output(message_body) File "/usr/lib/python2.7/httplib.py", line 811, in _send_output self.send(msg) File "/usr/lib/python2.7/httplib.py", line 773, in send self.connect() File "/usr/lib/python2.7/httplib.py", line 1154, in connect self.timeout, self.source_address) File "/usr/lib/python2.7/socket.py", line 571, in create_connection raise err error: [Errno 101] Network is unreachable I use Rackspace CloudFiles as a storage backend, last backup was 3 days ago (successful. I have not changed any settings since then.

  Read the article

• kvm and qemu host: Is there a limit for max CPUs (Ubuntu 10.04)?

  - by Valentin

  Today we encountered a really strange behaviour on two identical kvm and qemu hosts. The host systems each have 4 x 10 Cores, which means that 40 physical cores are displayed as 80 within the operating system (Ubuntu Linux 10.04 64 Bit). We started a Windows 2003 32 Bit VM (1 CPU, 1 GB RAM, we changed those values multiple times) on one of the nodes and noticed that it took 15 minutes until the boot process began. During those 15 minutes, a black screen is shown and nothing happens. libvirt and the host system show that the qemu-kvm process for the guest is almost idling. stracing this process only shows some FUTEX entries, but nothing special. After those 15 minutes, the Windows VM suddenly starts booting and the Windows logo occurs. After a few seconds, the VM is ready to be used. The VM itself is very performant, so this is no performance issue. We tried to pin the CPUs with the virsh and taskset tools, but this only made things worse. When we boot the Windows VM with a Linux Live CD there is also a black screen for several minutes, but not as long as 15. When booting another VM on this host (Ubuntu 10.04) it also has the black screen problem, and also here the black screen is only shown for 2-3 minutes (instead of 15). So, summerinzing this: Each guest on each of those identical nodes suffers from idling a few minutes after being started. After a few minutes, the boot process suddenly starts. We have observed that the idling time happens right after the bios of the guest was initialized. One of our employees had the idea to limit the amount of CPUs with maxcpus=40 (because of 40 physical cores existing) within Grub (kernel parameter) and suddenly the "black-screen-idling"-behaviour disappeared. Searching the KVM and Qemu mailing lists, the internet, forums, serverfault and other various sites for known bugs etc. showed no useful results. Even asking in the dev IRC channels brought no new ideas. The people there recommend us to use CPU pinning, but as stated before it didn't help. My question is now: Is there a sort of limit of CPUs for a qemu or kvm host system? Browsing the source code of those two tools showed that KVM would send a warning if your host has more than 255 CPUs. But we are not even scratching on that limit. Some stuff about the host system: 3.0.0-20-server kvm 1:84+dfsg-0ubuntu16+0.14.0+noroms+0ubuntu4 kvm-pxe 5.4.4-7ubuntu2 qemu-kvm 0.14.0+noroms-0ubuntu4 qemu-common 0.14.0+noroms-0ubuntu4 libvirt 0.8.8-1ubuntu6 4 x Intel(R) Xeon(R) CPU E7-4870 @ 2.40GHz, 10 Cores

  Read the article

• How to get my laptop to detect SD cards inserted into its built-in card reader?

  - by Candelight

  My laptop has a built-in SD Card reader but it cannot detect one when inserted. Here is the result when I type lspci from the terminal: 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:07.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80) 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80) 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80) 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 83) 00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80) 00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01) 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M] 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 05:04.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) 05:04.2 SD Host controller: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01) 05:04.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01) 05:09.0 Network controller: Ralink corp. RT2561/RT61 rev B 802.11g

  Read the article

• Where is '/host' declared for mount in Wubi (Ubuntu 9.10)?

  - by Pedro

  Hi! I'm using Wubi (ubuntu 9.10), and I couldn't find where '/host' mountpoint is declared for mounting. There's no entry in fstab, but it's listed in /proc/mount and mounted at boot time. Any ideas? pedroel@ubuntu:~$ cat /proc/mounts rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 none /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev tmpfs rw,relatime,mode=755 0 0 /dev/sda1 /host fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 0 0 /dev/loop0 / ext4 rw,relatime,errors=remount-ro,barrier=1,data=ordered 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 none /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0 none /var/run tmpfs rw,nosuid,relatime,mode=755 0 0 none /var/lock tmpfs rw,nosuid,nodev,noexec,relatime 0 0 none /lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0 /dev/loop1 /home/pedroel/Downloads ext4 rw,relatime,errors=remount-ro,barrier=1,data=ordered 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime 0 0 gvfs-fuse-daemon /home/pedroel/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0 /dev/mapper/isw_efhafcifi_RAID_Volume01 /media/RAID_D fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 pedroel@ubuntu:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # proc /proc proc defaults 0 0 /host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1 /host/ubuntu/disks/pedro.disk /home/pedroel/Downloads ext4 loop,errors=remount-ro 0 1 /host/ubuntu/disks/swap.disk none swap loop,sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 Thanks in advance, Pedro

  Read the article

• Will many links to the same page without nofollow penalize the host site in the search engine rankings?

  - by Evgeny

  May be a silly question, but I'll give it a shot :). On my forum app I would like to allow users with sufficiently high reputation display links to their home pages under every post - without the nofollow attribute (while lower rep users will have the nofollow) I am happy to help the site contributors improve rankings of their own, but not sure if this can actually deteriorate the rank of the host (the site that hosts those links) - as potentially the same link to the user's home page may be peppered in the pages of the host. What do you think? Thanks.

  Read the article

• How do I add a WMware ESXi Host to Microsoft Virtual Machine Manager?

  - by user63250

  I am trying to manage virtual machines running on a VMware ESXi host using Microsoft System Center Virtual Machine Manager. I was able to add the ESXi machine using the "Add VMware VirtualCenter server" option, but can't access any of the VMs on the datastore associated with this ESXi server. The datastore of the ESXi box is showing up with the correct name, but it won't let me see any of the VMs that have already been created; I get "There are no virtual machines on this host." Because I couldn't get any of the existing virtual machines to show up, I tried creating some new ones. When using VMM to connect to ESXi and create new VMs, I get the following error messages in the "rating explanation" section: The virtualization software on the selected host does not support virtual hard disks on an IDE bus. and The virtualization software on the host XXXXXX does not support the creation of dynamic virtual hard disk. Any ideas on why I can't manage existing machines and why I can't create new ones? The existing machines were created in vSphere. I should note that the ESXi server and the server running SCVMM are both on the same domain. I should also note that although the ESXi box has been added as a VirtualCetner server, when I try to add it through the "Add Host" option, I get an error message saying "Virtual Machine Manager cannot complete the VirtualCenter action on server EXSi because of the following error: The operation is not supported on the object."

  Read the article

• Where is '/host' declared for mount in Wubi (Ubuntu 9.10)?

  - by Pedro

  I'm using Wubi (ubuntu 9.10), and I couldn't find where '/host' mountpoint is declared for mounting. There's no entry in fstab, but it's listed in /proc/mount and mounted at boot time. Any ideas? pedroel@ubuntu:~$ cat /proc/mounts rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 none /proc proc rw,nosuid,nodev,noexec,relatime 0 0 udev /dev tmpfs rw,relatime,mode=755 0 0 /dev/sda1 /host fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other,blksize=4096 0 0 /dev/loop0 / ext4 rw,relatime,errors=remount-ro,barrier=1,data=ordered 0 0 none /sys/kernel/security securityfs rw,relatime 0 0 none /sys/fs/fuse/connections fusectl rw,relatime 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 none /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 0 0 none /dev/shm tmpfs rw,nosuid,nodev,relatime 0 0 none /var/run tmpfs rw,nosuid,relatime,mode=755 0 0 none /var/lock tmpfs rw,nosuid,nodev,noexec,relatime 0 0 none /lib/init/rw tmpfs rw,nosuid,relatime,mode=755 0 0 /dev/loop1 /home/pedroel/Downloads ext4 rw,relatime,errors=remount-ro,barrier=1,data=ordered 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime 0 0 gvfs-fuse-daemon /home/pedroel/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 0 0 /dev/mapper/isw_efhafcifi_RAID_Volume01 /media/RAID_D fuseblk rw,nosuid,nodev,relatime,user_id=0,group_id=0,default_permissions,allow_other,blksize=4096 0 0 pedroel@ubuntu:~$ cat /etc/fstab # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # proc /proc proc defaults 0 0 /host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1 /host/ubuntu/disks/pedro.disk /home/pedroel/Downloads ext4 loop,errors=remount-ro 0 1 /host/ubuntu/disks/swap.disk none swap loop,sw 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0 Thanks in advance, Pedro

  Read the article

• How to share drive space from vmware server 2 host to a guest?

  - by matnagel

  In the vmware tools in the guest there is an option to access shares from the host. What is the way to create such shares on a vmware 2 host? I did not find where in infrastructure web access. I also went through the vmware server 2 user's guide but did not see it mentioned. Can you help? This is an ubuntu 64 bit server 8.04 LTS host.

  Read the article

• How can I change the apache config for a virtual host, from the shell on a whm/cpanel system?

  - by Chiggsy

  I wanted to change the setting for a virtual host in a hurry I knew how to "just do it" but I'm not very familiar with the restrictions of the cpanel system. I read the theory of the config system and regardless of my feelings on the matter I understand where they are coming from. However in that world view, there must be a way to interact with the system from a command line interface, not just for httpd.conf but for the virtual host containers as well EDIT: reworded this question a bit to show I was talking about a virtual host container.

  Read the article

• Cocos2d: Adding a CCSequence to a CCArray

  - by Axort

  I have a problem with an action performed by a sprite. I have one CCSequence in a CCArray and I have an scheduled method (is called every 5 seconds) that make the sprite run the action. The action is performed correctly only the first time (the first 5 seconds), after that, the action do whatever it wants lol. Here is the code: In .h - @interface PowerUpLayer : CCLayer { PowerUp *powerUp; CCArray *trajectories; } @property (nonatomic, retain) CCArray *trajectories; In .mm - @implementation PowerUpLayer @synthesize trajectories; -(id)init { if((self = [super init])) { [self createTrajectories]; self.isTouchEnabled = YES; [self schedule:@selector(spawn:) interval:5]; } return self; } -(void)createTrajectories { self.trajectories = [CCArray arrayWithCapacity:1]; //Wave trajectory ccBezierConfig firstWave, secondWave; firstWave.controlPoint_1 = CGPointMake([[CCDirector sharedDirector] winSize].width + 30, [[CCDirector sharedDirector] winSize].height / 2);//powerUp.sprite.position.x, powerUp.sprite.position.y); firstWave.controlPoint_2 = CGPointMake([[CCDirector sharedDirector] winSize].width - ([[CCDirector sharedDirector] winSize].width / 4), 0); firstWave.endPosition = CGPointMake([[CCDirector sharedDirector] winSize].width / 2, [[CCDirector sharedDirector] winSize].height / 2); secondWave.controlPoint_1 = CGPointMake([[CCDirector sharedDirector] winSize].width / 2, [[CCDirector sharedDirector] winSize].height / 2); secondWave.controlPoint_2 = CGPointMake([[CCDirector sharedDirector] winSize].width / 4, [[CCDirector sharedDirector] winSize].height); secondWave.endPosition = CGPointMake(-30, [[CCDirector sharedDirector] winSize].height / 2); id bezierWave1 = [CCBezierTo actionWithDuration:1 bezier:firstWave]; id bezierWave2 = [CCBezierTo actionWithDuration:1 bezier:secondWave]; id waveTrajectory = [CCSequence actions:bezierWave1, bezierWave2, [CCCallFuncN actionWithTarget:self selector:@selector(setInvisible:)], nil]; [self.trajectories addObject:waveTrajectory]; //[powerUp.sprite runAction:bezierForward]; // [CCMoveBy actionWithDuration:3 position:CGPointMake(-[[CCDirector sharedDirector] winSize].width - powerUp.sprite.contentSize.width, 0)] //[powerUp.sprite runAction:[CCSequence actions:bezierWave1, bezierWave2, [CCCallFuncN actionWithTarget:self selector:@selector(setInvisible:)], nil]]; } -(void)setInvisible:(id)sender { if(powerUp != nil) { [self removeChild:sender cleanup:YES]; powerUp = nil; } } This is the scheduled method: -(void)spawn:(ccTime)dt { if(powerUp == nil) { powerUp = [[PowerUp alloc] initWithType:0]; powerUp.sprite.position = CGPointMake([[CCDirector sharedDirector] winSize].width + powerUp.sprite.contentSize.width, [[CCDirector sharedDirector] winSize].height / 2); [self addChild:powerUp.sprite z:-1]; [powerUp.sprite runAction:((CCSequence *)[self.trajectories objectAtIndex:0])]; } } I don't know what is happening; I never modify the content of the CCSequence after the first time. Thanks!

  Read the article

• How anti-virus on the host machne affects performance of virtual machines?

  - by Ladislav Mrnka

  I'm diagnosing some issue with Oracle virtual box where virtual machine sometimes perform terribly slow (much slower then notebook with worse configuration): Notebook i7 (2 cores with HT = 4 logical CPUs), 4GB RAM, 5400 rpm disk, Win 7 64bit Virtual machine (Oracle Virtual Box) Host: i7 (4 cores with HT = 8 logical CPUs, 12 GB RAM, system runs from SSD, virtual machine from 7200 rpm disk, Win 7 64bit) Virtual machine: 4 cores assigned, 8 GB RAM assigned, Win 2008 R2 Enterprise (64 bit) Virtual machine uses bridge to separate network interface (machine has two) VPN for network communication No other virtual machine runs on the host Host has installed ESET Smart Security All SW is updated with last version. My question is if anti-virus on the host machine can somehow affect performance of the virtual machine and if so how can I turn it off without turning the anti-virus itself?

  Read the article

• Crash when using Cocos2d

  - by ipodfreak0313

  Sorry about the poor question title, it's just that this seems to big for a title. So here's the dirt: I am making a game (obviously) and I want the enemies to shoot (not necessarily at the player). I want the shoot method to be in the Enemies file, so as not to clutter up my HelloWorldLayer.m file even more. Here's what I'm using right now: HelloWorldLayer.m -(void)addEnemy:(BigAndStrongEnemy *)enemy { enemy = nil; if((arc4random() % 4) == 3) { enemy = [BigAndStrongEnemy enemy]; } else { enemy = [SmallAndFastEnemy enemy]; } if(buffDude.position.y > character.position.y || buffDude.position.y < (character.position.y + 10)) { } int rand = arc4random() % 320; if((arc4random() % 2 == 1)) { [enemy setPosition:ccp(0,rand)]; }else{ [enemy setPosition:ccp(480,rand)]; } [self animateEnemy:enemy]; [self addChild:enemy]; } -(void)animateEnemy:(BigAndStrongEnemy *)enemy2 { float randX = arc4random() % 480; float randY = arc4random() % 320; int rand = arc4random() % 320; CGPoint moveToPoint = CGPointMake(randX, (randY - rand)); [enemies addObject:enemy2]; action = [CCSequence actions: [CCMoveBy actionWithDuration:1 position:ccpMult(ccpNormalize(ccpSub(moveToPoint, enemy2.position)), 75)], [CCMoveBy actionWithDuration:3 position:ccp(buffDude.position.x,buffDude.position.y)], nil]; CCCallFuncO *a = [CCCallFuncO actionWithTarget:self selector:(@selector(shoot:)) object:enemy2]; CCSequence *s = [CCSequence actions:action,a, nil]; CCRepeatForever *repeat = [CCRepeatForever actionWithAction:s]; [enemy2 runAction:repeat]; } And here's the Shoot info from the Enemies class: Enemies.m: -(void)shoot:(id)sender { self = (BigAndStrongEnemy *)sender; [self shoot]; } -(void)spriteMoveFinished:(id)sender { CCSprite *b = (CCSprite *)sender; [self removeChild:b cleanup:YES]; } -(void)shoot { self = [CCSprite spriteWithFile:@"bigAndStrongEnemy.gif"]; CCSprite *b = [CCSprite spriteWithFile:@"bullet.gif"]; b.position = ccp(self.position.x,self.position.y); b.tag = 2; [self addChild:b]; [bullets addObject:b]; CGSize winSize = [[CCDirector sharedDirector] winSize]; CGPoint point = CGPointMake((winSize.width - (winSize.width - self.position.x)),0); [b runAction:[CCSequence actions: [CCMoveBy actionWithDuration:0.5 position:point], [CCCallFuncN actionWithTarget:self selector:@selector(spriteMoveFinished:)], nil]]; } Every time the 3 seconds goes by, the app crashes, and goes to the breakpoint in the CCCallFuncO file. I haven't touched it, is the thing. I am completely confused. Any help is greatly appreciated.

  Read the article

• Can I run 64-bit VM guests on a 32-bit host?

  - by Maestro1024

  Can I run 64-bit VM guests on a 32-bit host? If I have a physical PC with 32 bit can I launch a VM that is 64 bit? What virtual machine software (Virtual PC or VirtualBox or other) would allow this? I read out there that VMware may support this but I am looking for something Open source or free. Host would preferably be a Windows host but could be Linux. Guest needs to be Windows. Thanks

  Read the article

• As a self-taught programmer, how do I get the academic foundation without attending school again?

  - by hal10001

  I've made a pretty good living as a self-taught programmer, but when I find that I discuss some low-level fundamental topics with my peers who have a CS degree, holes appear in my knowledge. I'm a big picture (architecture) guy, so for a long time this hasn't bothered me, but lately I've wondered if there is an approach I can take that will help me learn these fundamentals without going back to school? Are there books, websites or videos that you can recommend that would give me a ground-up perspective as opposed to a learn it as you need it mentality?

  Read the article

• Using .add() on the same widget more than once

  - by Dillon Gilmore

  I asked this question on Reddit and was directed here. http://www.reddit.com/r/Ubuntu/comments/vhadl/quickly_dynamic_ui/ Unfortunately I am having the same issue and the problems seems that you can only use .add() on a widget once. So here is my code, self.ui.labels = [] for titles in entries: label = Gtk.Label() self.ui.labels.append(label) self.ui.viewport1.add(self.ui.labels[-1]) self.ui.paned1.show_all() Now, for fun I decided "What would happen if I just manually did..." self.ui.viewport1.add(Gtk.Label()) self.ui.viewport1.add(Gtk.Button()) self.ui.viewport1.add(Gtk.Entry()) For my first code snippet I get this error, Gtk-CRITICAL **: gtk_viewport_add: assertion gtk_bin_get_child (bin) == NULL' failed The error happens an unknown amount of times because the list entries can vary in length, but for my second code snippet it happens exactly twice. This means that when I viewport1.add() it works the first time, but all adds after that receive the error above. So my question, is there a way in python to use .add() on the same widget more than once?

  Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >