Search Results

Search found 5933 results on 238 pages for 'mass storage'.

Page 87/238 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

  • local cache for NAS or network folder

    - by HugoRune
    I am planning to build a network attached storage (NAS) server. Is there a way to cache frequently acccessed files from the remote storage automatically on the local PC? (I am not looking for a way to sync whole folders like rsync, but rather something that automatically and transparently caches the last accessed 50 gb of files.) Ideally I am searching for something that caches writes as well as reads, since only one pc will be accessing the server (and one day of lost changes if the local cache is damaged would be acceptable) I looked into windows offline files, but as far as I could tell this requires manual interaction to disconnect the server or go into offline mode in order to use the cache. The server would probably be running Linux or freeNAS, the pc runs Windows xp, but could be upgraded to 7 if required.

    Read the article

  • Issue with VMWare vSphere and NFS: re occurring apd state

    - by Bastian N.
    I am experiencing issues with VMWare vSphere 5.1 and NFS storage on 2 different setups, which result in an "All Path Down" state for the NFS shares. This first happened once or twice a day, but lately it occurs much more frequent, as specially when Acronis Backup jobs are running. Setup 1 (Production): 2 ESXi 5.1 hosts (Essentials Plus) + OpenFiler with NFS as storage Setup 2 (Lab): 1 ESXi 5.1 host + Ubuntu 12.04 LTS with NFS as storage Here is an example from the vmkernel.log: 2013-05-28T08:07:33.479Z cpu0:2054)StorageApdHandler: 248: APD Timer started for ident [987c2dd0-02658e1e] 2013-05-28T08:07:33.479Z cpu0:2054)StorageApdHandler: 395: Device or filesystem with identifier [987c2dd0-02658e1e] has entered the All Paths Down state. 2013-05-28T08:07:33.479Z cpu0:2054)StorageApdHandler: 846: APD Start for ident [987c2dd0-02658e1e]! 2013-05-28T08:07:37.485Z cpu0:2052)NFSLock: 610: Stop accessing fd 0x410007e4cf28 3 2013-05-28T08:07:37.485Z cpu0:2052)NFSLock: 610: Stop accessing fd 0x410007e4d0e8 3 2013-05-28T08:07:41.280Z cpu1:2049)StorageApdHandler: 277: APD Timer killed for ident [987c2dd0-02658e1e] 2013-05-28T08:07:41.280Z cpu1:2049)StorageApdHandler: 402: Device or filesystem with identifier [987c2dd0-02658e1e] has exited the All Paths Down state. 2013-05-28T08:07:41.281Z cpu1:2049)StorageApdHandler: 902: APD Exit for ident [987c2dd0-02658e1e]! 2013-05-28T08:07:52.300Z cpu1:3679)NFSLock: 570: Start accessing fd 0x410007e4d0e8 again 2013-05-28T08:07:52.300Z cpu1:3679)NFSLock: 570: Start accessing fd 0x410007e4cf28 again As long as the issue occurred once or twice a day it really wasn't a problem, but now this issue has impact on the VMs. The VMs get slow or even hang, resulting in a reset through vCenter in the production environment. I searched the web extensively and asked in forums, but till now nobody was able to help me. Based on blog posts and VMWare KB articles I tried the following NFS settings: Net.TcpipHeapSize = 32 Net.TcpipHeapMax = 128 NFS.HartbeatFrequency = 12 NFS.HartbeatMaxFailures = 10 NFS.HartbeatTimeout = 5 NFS.MaxQueueDepth = 64 Instead of NFS.MaxQueueDepth = 64 I already tried other settings like NFS.MaxQueueDepth = 32 or even NFS.MaxQueueDepth = 1. Unfortunately without any luck. It would be great if someone could help me on this issue. It is really annoying. Thanks in advance for all the help. [UPDATE] As I explained in the comment below, here is the network setup: On the production setup the NFS traffic is bound to a separate VLAN with ID 20. I am using a HP 1810 24 Port Switch. The OpenFiler system is connected to the VLAN with 4 Intel GbE NICs with dynamic LACP. The ESXis both have 4 Intel GbE NICs using 2 static LACP trunks containing 2 NICs each. One pair is connected to the regular LAN and the other one to the VLAN 20. And here is a screenshot of the vSwitch: Switch configuration: Port configuration: On the lab setup its a single Intel NIC on each side without VLAN, but with different IP subnet.

    Read the article

  • INNODB mysql. Plugin disabled

    - by alexcunn
    When I startup mysql on my unbuntu server I will get a message. 121122 17:39:37 [Note] Plugin 'FEDERATED' is disabled. 121122 17:39:37 InnoDB: The InnoDB memory heap is disabled 121122 17:39:37 InnoDB: Mutexes and rw_locks use GCC atomic builtins 121122 17:39:37 InnoDB: Compressed tables use zlib 1.2.3.4 121122 17:39:37 InnoDB: Initializing buffer pool, size = 128.0M InnoDB: mmap(137363456 bytes) failed; errno 12 121122 17:39:37 InnoDB: Completed initialization of buffer pool 121122 17:39:37 InnoDB: Fatal error: cannot allocate memory for the buffer pool 121122 17:39:37 [ERROR] Plugin 'InnoDB' init function returned error. 121122 17:39:37 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 121122 17:39:37 [ERROR] Unknown/unsupported storage engine: InnoDB 121122 17:39:37 [ERROR] Aborting 121122 17:39:37 [Note] mysqld: Shutdown complete a few times I have got a message saying that the plugin is disabled. I use webmin to configure it. Could that be a problem?

    Read the article

  • How to Remove a VM From Hyper-V Without Deleting the Configuration File?

    - by Steven Murawski
    I'm in the process of moving a number of virtual machines that are homed on shared storage (a file share, though shared cluster disk would work as well) to a new VM host with access to the same shared storage. The new host is a different build version (moving from Windows Server 2012 Beta to Windows Server 2012 RC - though this same process could be used with migrations of Windows Server 2008/2008 R2 to Windows Server 2012 as well), so I cannot migrate the machine with inbox tooling. I need to remove the VM from management of the source Hyper-V host in order to import the VM to the new Hyper-V host. I want to retain the configuration file, so I can import the VM as it stands and not need to reconfigure it. The VHD files are rather large and they are staying on the same file share, so I'd rather not duplicate them during the move process.

    Read the article

  • development server?

    - by ajsie
    for a project there will be me and one more programmer to develop a web service. i wonder how the development environment should be like. cause we need central storage (documents, pictures, business materials etc), file version handling, lamp (testing the web service) etc. i have never set up an environment for this before and want to have suggestions from experienced people which tools to use for effective collaboration. what crossed my mind: seperate applications: - google wave (for communication forth and back, setting up guide lines, other information) - team viewer (desktop sharing) - skype (calling) vps (ubuntu server): - svn (version tracking) - ftp (central storage) - lamp (testing the web service) - ssh (managing the vps) is this an appropriate programming environment? and regarding the vps, is it best practice to use ONE vps for all tasks listed up there? all suggestions and feedbacks are welcome!

    Read the article

  • UnicodeEncodeError when uploading files in Django admin

    - by Samuel Linde
    Note: I asked this question on StackOverflow, but I realize this might be a more proper place to ask this kind of question. I'm trying to upload a file called 'Testaråäö.txt' via the Django admin app. I'm running Django 1.3.1 with Gunicorn 0.13.4 and Nginx 0.7.6.7 on a Debian 6 server. Database is PostgreSQL 8.4.9. Other Unicode data is saved to the database with no problem, so I guess the problem must be with the filesystem somehow. I've set http { charset utf-8; } in my nginx.conf. LC_ALL and LANG is set to 'sv_SE.UTF-8'. Running 'locale' verifies this. I even tried setting LC_ALL and LANG in my nginx init script just to make sure locale is set properly. Here's the traceback: Traceback (most recent call last): File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/handlers/base.py", line 111, in get_response response = callback(request, *callback_args, **callback_kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/options.py", line 307, in wrapper return self.admin_site.admin_view(view)(*args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 93, in _wrapped_view response = view_func(request, *args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/views/decorators/cache.py", line 79, in _wrapped_view_func response = view_func(request, *args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/sites.py", line 197, in inner return view(request, *args, **kwargs) File "/srv/django/letebo/app/cms/admin.py", line 81, in change_view return super(PageAdmin, self).change_view(request, obj_id) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 28, in _wrapper return bound_func(*args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 93, in _wrapped_view response = view_func(request, *args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/utils/decorators.py", line 24, in bound_func return func(self, *args2, **kwargs2) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/transaction.py", line 217, in inner res = func(*args, **kwargs) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/options.py", line 985, in change_view self.save_formset(request, form, formset, change=True) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/contrib/admin/options.py", line 677, in save_formset formset.save() File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/forms/models.py", line 482, in save return self.save_existing_objects(commit) + self.save_new_objects(commit) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/forms/models.py", line 613, in save_new_objects self.new_objects.append(self.save_new(form, commit=commit)) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/forms/models.py", line 717, in save_new obj.save() File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/base.py", line 460, in save self.save_base(using=using, force_insert=force_insert, force_update=force_update) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/base.py", line 504, in save_base self.save_base(cls=parent, origin=org, using=using) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/base.py", line 543, in save_base for f in meta.local_fields if not isinstance(f, AutoField)] File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/fields/files.py", line 255, in pre_save file.save(file.name, file, save=False) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/db/models/fields/files.py", line 92, in save self.name = self.storage.save(name, content) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/files/storage.py", line 48, in save name = self.get_available_name(name) File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/files/storage.py", line 74, in get_available_name while self.exists(name): File "/srv/.virtualenvs/letebo/lib/python2.6/site-packages/django/core/files/storage.py", line 218, in exists return os.path.exists(self.path(name)) File "/srv/.virtualenvs/letebo/lib/python2.6/genericpath.py", line 18, in exists st = os.stat(path) UnicodeEncodeError: 'ascii' codec can't encode characters in position 52-54: ordinal not in range(128) I tried running Gunicorn with debugging turned on, and the file uploads without any problem at all. I suppose this must mean that the issue is with Nginx. Still beats me where to look, though. Here are the raw response headers from Gunicorn and Nginx, if it makes any sense: Gunicorn: HTTP/1.1 302 FOUND Server: gunicorn/0.13.4 Date: Thu, 09 Feb 2012 14:50:27 GMT Connection: close Transfer-Encoding: chunked Expires: Thu, 09 Feb 2012 14:50:27 GMT Vary: Cookie Last-Modified: Thu, 09 Feb 2012 14:50:27 GMT Location: http://my-server.se:8000/admin/cms/page/15/ Cache-Control: max-age=0 Content-Type: text/html; charset=utf-8 Set-Cookie: messages="yada yada yada"; Path=/ Nginx: HTTP/1.1 500 INTERNAL SERVER ERROR Server: nginx/0.7.67 Date: Thu, 09 Feb 2012 14:50:57 GMT Content-Type: text/html; charset=utf-8 Transfer-Encoding: chunked Connection: close Vary: Cookie 500 UPDATE: Both locale.getpreferredencoding() and sys.getfilesystemencoding() outputs 'UTF-8'. locale.getdefaultlocale() outputs ('sv_SE', 'UTF8'). This seem correct to me, so I'm still not sure why I keep getting these errors.

    Read the article

  • sudo/su command for Red Hat Server 5.4

    - by rednaxela
    Without going into too much detail, I need to execute one linux command on redhat with root user access. Red Hat Server 5.4 does not recognise the sudo command. The command su can be used to switch to the root user on redhat, but su cannot be done in one line. For example the command: su ; cd opt/storage/RootAccessFolder will not work because this only switches you to root, then executes the cd command once you have logged out from the root user. I guess what i'm looking for is like a.. sudo cd opt/storage/RootAccessFolder but I say again, sudo doesn't work. Any ideas?

    Read the article

  • Email Servers that Abstracts Mailbox Concepts [on hold]

    - by David
    Lately I've been really interested in doing some very unique things with email most of which rely on a SMTP and POP or IMAP server that gives the administrator an API to create arbitrary methods for email storage, notifications, or delivery. What I'm looking for would be analogous to mod_php and apache where apache handles the delivery protocol and php handles the content creation and storage. I've considered making my own, as those three protocols are quite simple, but I'm always nervous about putting my code public facing especially when it's at that low of a level. So are there any email servers that allow for this much arbitrary control over email delivery, fetching, and receiving.

    Read the article

  • selective backup script in bash

    - by Sake
    Hi, I've been using this simple command (that's all I can do :) to backup the whole tree from my user data in NAS server for a year. cp -r /STORAGE /BACKUP-STORAGE/YYYY-MM-DD Unfortunately, after a year of service. My user start filling the spaces with lot of photo and cliparts (jpg, gif, bmp) And that start to make my backup process get much slower. The space is also a big issue. Now I no longer have enough space for a week-long daily backup set. I think I want to change from backup everything to backup only non-image data. How can I exclude jpg, gif, and bmp from the backup ? It's quite easy with DOS XCOPY command, but I really have no idea how to do that in bash. Thanks

    Read the article

  • How can I tell if ZFS (zfs-fuse) dedup/compression is applied to a particular file?

    - by asari
    I have a zfs formatted partition using zfs-fuse for linux (Ubuntu). I had used it for a while, and then enabled dedup and compression on it (zfs set compression=on/dedup=on). Now I think I have some files that are dedup'ed and compressed, and file that are not yet. It was OK, but sometimes I was confused. Let's see, following command would consume almost 4GB of my zfs storage: cp oldfile.4GB newfile.4GB .. and this would consume almost zero: cp newfile.4GB newfile.4GB.2 This is because the old file is not yet compressed, so dedup not happened, I think. My idea is -- if I can find old files that are not yet dedup/compressed, I can perform batch copy/rename/remove them to eliminate duplicity and redundancy. But how I can check that? I know I can re-copy whole contents of my storage should work (even better with checking the time stamp of each file), but I'd be happier if I have zfsstat-like tool that shows some file properties.

    Read the article

  • NETAPP Fragmentation

    - by mdpc
    We all know that once a disk (or storage system for that matter) gets introduced into use, the performance degrades due to fragmentation of files. This seems to be why disk defragmentors are in fairly wide use on Windows boxes. And they do increase the performance substancially. As an aside, I haven't heard of many defragmentors in the Unix/Linux area. Despite the claimed WAFL protections for the NetApp, file fragmentation still will occur, especially with all the sparsely crated VMs. My question is does anybody do any sort of defragmention of such a storage system? Do you notice any measurable degration/improvement of either not doing/doing anything to address this situation? Does anybody do anything about it? If so what? Thanks

    Read the article

  • (simple) linux HA with vmware vsphere?

    - by derhelge
    I hope my upcoming question is specific enough, and you are able and willing to support :-) We have several openSUSE VMs in an ESX-Cluster (three ESX-Servers) with an attached iSCSI-SAN. All of those Linux VMs are "single point of failure"-configured, which means in the case of a Web-Server: LAMP, storage, etc. everything on this machine. This was very simple and in case of a failure (in the last years: kernel panics or apache crashes) a simple reboot triggered by a script did it. But the problem is: How to upgrade/maintain the w(eb-)application or the underlying OS without downtime? This wasn't really managable and i did this in the early morning ;) How can i achieve a "simple" High-Availability Cluster now? I thought of: DRBD with heartbeat with 2 VMs. And for the storage a RDM (raw device mapped) LUN and change the read-write-permissions for both VMs. Is this a good idea? Anyone has a better solution?

    Read the article

  • Feedback on Using ZFS and FreeBSD

    - by ToiletOverflow
    I need to create a server that will be used solely for backing up files. The server will have 2TB of storage to begin with but I may want to add additional storage later on. As such, I am currently considering using FreeBSD + ZFS as the OS and file system. Is ZFS a reliable, trusted file system? Should I use it in this scenario? I have read that ZFS should be used with OpenSolaris over FreeBSD as OpenSolaris is usually ahead of the curve with ZFS as far as version updates and stability. However, I am not interested in using OpenSolaris for this project. An alternative option that I am considering is to stick with ext3 and create multiple volumes if need be, because I know that I will not need a single, continuous volume larger than 2TB. Thanks in advance for your feedback.

    Read the article

  • Best practice for assigning private IP ranges?

    - by Tauren
    Is it common practice to use certain private IP address ranges for certain purposes? I'm starting to look into setting up virtualization systems and storage servers. Each system has two NICs, one for public network access, and one for internal management and storage access. Is it common for businesses to use certain ranges for certain purposes? If so, what are these ranges and purposes? Or does everyone do it differently? I just don't want to do it completely differently from what is standard practice in order to simplify things for new hires, etc.

    Read the article

  • Are FC and SAS DAS devices standard enough?

    - by user222182
    Before I ask my questions, here is some background info that may or may not be useful: For the first time I find myself needing a DAS solution. My priority is data through-put in a single direction. I can write large blocks, and I don't need to read at the same time. The server (the data producing device) is not really a typical server, its a very powerful single board computer. As such I have limited options when it comes to the add-in cards I can install since it must use the fairly uncommon interface, XMC. Currently I believe I am limited PCIex8 gen 1 which means that the likely bottle neck for me will be this 16gbps connection. XMC Boards I have found so far offer the following connections: a) Dual 10GBE ethernet controller, total throughput 20gbps b) Dual Quad SAS 2.0 Connectors (SFF-8XXX) HBA (no raid), total throughput 48 gbps c) Dual FC 8gb HBA (no raid), total throughput 16gbps My questions for you guys are: 1) Are SAS and/or FC, and by extension their HBAs, standard enough that I could purchase a Dell or Aberdeen storage server with a raid controller that has external SAS or FC ports and expect that I can connect it to my SAS or FC HBA, be presented with a single volume (if I so configured the storage server), all without having to check for HBA compatibility? 2) On a device like a Dell PowerVault (either DAS or NAS) is there an OS on it to concern myself with, or is it meant to be remotely managed? Is there a local interface in case I cant remotely manage it (i.e. if my single board computer uses an OS not supported by Dell OpenManage). Would this be true of nearly any device which calls itself a DAS? 3) If I purchase some sort of Supermicro storage chassis, installed a raid controller with external connections, is there a nice lightweight OS I can run just for management of the controller? Would I even need an OS since the raid card would be configured pre-boot anyway? 4) It is much easier to buy XMC based 10gigabit ethernet cards (generally dual port). In what ways would I be getting into trouble by using iSCSI as a DAS are direct cabling with SFP+ cables? Thanks in advance

    Read the article

  • New standalone ESXi 5 deployments - USB versus SD card?

    - by ewwhite
    Now that the old full VMWare ESX with service console is no longer, I'm redeploying some standalone ESXi servers. I'm using HP ProLiant ML and DL G6 and G7 servers. Does it make more sense to utilize the internal USB port for ESXi or the internal SD card slot? I'm using the HP ESXi 5 build, but am not sure what the recommended practice is. Any recommendations on cards/USB drives for this purpose? BTW - these will be all-in-one storage servers with the onboard disk storage presented via PCIe passthrough.

    Read the article

  • Windows Server 2003 R2 sp2 and Exchange 2003 - missing pop-up menu "Exchange Tasks"

    - by Denis
    I need to recover database. That's what i doing step-by-step: - In Exchange System Manager check the server - Create new Recovery Storage Group - Add Database to recover - Mount store for it Database (Mailbox Store) - all finish successful Next step - I need check user and in pop-up menu click on "Exchange Tasks...", but in menu i see only "Help". Main question - why I have not "Exchange Tasks" and how I can get it? But I can see "Exchange Tasks" in "First storage Group"-Mailbox-User. Sorry for my bad English. Thanks, Denis

    Read the article

  • how to pipe data to sftp connection?

    - by JMW
    ftp supports the put "|..." "remote-file.name" command to pipe data to an ftp connection. Is there something similar available for sftp? In sftp i get the following error: sftp 'jmw@backupsrv:/uploads' sftp> put "| tar -cx /storage" "backup-2012-06-19--17-51.tgz" stat | tar -cv /storage: No such file or directory as above the sftp client doesn't obviously execute the command. i want to use the pipe command to directly redirect the file stream to sftp. (because there is not enough space left to create a backup file on the same disk before uploading it to sftp server.)

    Read the article

  • Horrible performing RAID

    - by Philip
    I have a small GlusterFS Cluster with two storage servers providing a replicated volume. Each server has 2 SAS disks for the OS and logs and 22 SATA disks for the actual data striped together as a RAID10 using MegaRAID SAS 9280-4i4e with this configuration: http://pastebin.com/2xj4401J Connected to this cluster are a few other servers with the native client running nginx to serve files stored on it in the order of 3-10MB. Right now a storage server has a outgoing bandwith of 300Mbit/s and the busy rate of the raid array is at 30-40%. There are also strange side-effects: Sometimes the io-latency skyrockets and there is no access possible on the raid for 10 seconds. The file system used is xfs and it has been tuned to match the raid stripe size. Does anyone have an idea what could be the reason for such a bad performing array? 22 Disks in a RAID10 should deliver way more throughput.

    Read the article

  • Distributed file systems

    - by Neeraj
    I need to implement a distributed storage system for a set of nodes(devices) connected in a mesh network. So what basically my design goals are: The storage system should be capable of handling dynamic entry and exit of nodes. Replication (for fault tolerance). For this i am thinking of using a Distributed file system. Every node could access data in the other nodes in a transparent manner. Are there some simple, easily pluggable opensource implementations? Thanks for your thoughts!

    Read the article

  • Best practice? Using DPM to backup VMs within each VM or through the host?

    - by andrew
    We've got two Hyper-V hosts running multiple VMs (all flavors of Windows Servers). One of the VMs is running MS Data Protection Manager 2010, which runs beautifully (most of the time) and is connected to a separate NAS via iSCSI for the DPM storage. I noticed when I installed the DPM agent on the Hyper-V hosts, it enumerates the VMs in the DPM Protection listing. I don't want to burn through my storage space too fast with duplicate protection, so I was wondering: Is it recommended to back up VMs through the host, or is it better to install the DPM agent on each VM and backup as I would any other machine? It would seem as though most people (currently including me) do it the second way, but is there any advantage to including the entries under HyperV (Backup using Child Partition Snapshop)?

    Read the article

  • Can Time Capsule backup its own network share or can Time Machine be setup to do so?

    - by Sam Brightman
    Apple's Time Capsule can act as both a backup drive and a network shared drive at the same time. Can it backup its own data to incremental backups? I can't find this information anywhere. I've not used Time Machine so I don't know if it can be configured to backup shared drives (independently of whether Time Capsule has the option). I would like this to be a feasible way of freeing up some storage on an older MacBook Air by keeping large media such as photos archived on the drive like you would a USB external drive. But having the only copy accessible throughout the house and not backed up would make me nervous. I like the idea of having a good router, network storage and backup in one box, although obviously it's safer to backup the Capsule itself to USB occasionally too. Other solutions to this are of course welcome if this is not possible.

    Read the article

  • Printer options follow Office documents

    - by tkalve
    One person (John) creates an Office document, and prints this document to his HP printer which is using HP Universal Printing PS (v4.7) driver. He has got Job Storage (Personal job) enabled for this printer, with custom username and a personal PIN. He later sends this document in an e-mail to his colleagues. Another person (Anne) opens the document, and tries to print the document to her HP printer (also using HP Universal Printing driver), but is not able to fetch it on the printer. The Job Storage options from Johns computer follows the Office Excel document, so Anne has to change this manually to her username and her PIN before she can print. What on earth is causing this, and how do we fix it?

    Read the article

  • Setting up an Active-Active IIS Cluster with ARR - is it possible?

    - by Ahmed Zubair
    I would like to know if we can setup an Active-Active IIS Cluster using Windows Cluster services that shares a common storage to store web content and WITHOUT the use of Windows NLB. I'm aware that this may not be a best practice or not a recommended setup, however, the setup is to be configured as below: Two web servers running IIS 7.5 (needs a common storage for web content) for HA and another set of two servers for sql cluster in active-passive mode for HA. Also is it possible to enable ARR on 2 node active-active IIS cluster for load balancing http requests? Appreciate if someone replies with both pros & cons of the setup.

    Read the article

  • Changing default datadirectory to one on a External NAS or add external share

    - by Hagbart Celine
    So I have been searching the web for days, looking for a solution to my problem. Now my only hope are you guys. I have installed Owncloud successfully on my Windows Server 2008R2. It all runs smoothly and I can connect without problems. So first checks are OK. Now I wanted to change the default data directory from my server to a shared folder on my NAS (Synology DS1813+, DSM 5.0-4493 Update 3). Tried following: changing the directory in config.php I changed the path in the config file from : "C:\inetpub\wwwroot\myfolder\data" to "\NASIP\cloud". by doing this the owncloud server only shows: Code: Select all Daten-Verzeichnis (\192.168.2.4\Cloud\data) ist ungültig Bitte stelle sicher, dass das Daten-Verzeichnis eine Datei namens ".ocdata" im Wurzelverzeichnis enthält. I also tried coping the files that were created in the local data storage, to the share on the NAS. No Luck. Now I tried it by mapping a network drive and using that in the config.php But still no luck. I get the same message with the missing .ocdata file. Now I tried the "External Storage APP" that comes with owncloud I thought that at least I could add the share as an external storage. But this also does not work. tried UNC, Mapped Drive Name (Z:) but nothing helped. So now I'm turning to you.. Does anyone have expirience with this kind of setup? Or can you even tell me how to make it work? (default or external storgae, I don't care anymore ) Using NAS (Synology DS1813+, DSM 5.0-4493 Update 3), Owncloud 7, Windows Server 2008 R2, IIS7 I got an answer on an other forum: The second option is how it should be done: 1. Put OC in maintenance mode 2. Mount (mapping in the windows world) your NAS directly to your OS 3. Copy the local data directory to the NAS mount 4. Ensure the permission is setup to give the web user access to the NAS mount 5. Update OC config.php with the new data path 6. Disable OC maintenance mode And this seems like the right way.. Ensure the permission is setup to give the web user access to the NAS mount I guess this is where I am not sure. What user is it exactly on my Server that is making the requests to the NAS? If the user is for example "IUSR" I can just create an account on my synology NAS and give him full access to my share? (But what is IUSRs password?) I have full root ssh access to my NAS, so if you can tell me what chmod or chown I need to use on my cloud folder...

    Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >