Search Results

Search found 3604 results on 145 pages for 'bigced 21'.

Page 88/145 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

  • Site to Site VPN with Fault Tolerence

    - by Nordberg
    Hello, I have a situation where I require an IPSEC tunnel between two sites. Site 2 is a small branch office with basic (ADSL) connectivity and Site 1 is the "main" office with SDSL and ADSL for redundancy should the SDSL fail. From Site 1, all traffic bound for the 172.0.0.0 network will then be sent down another IPSEC tunnel to a supplier's Remote Server. See this page for the basic premise (this is a rough idea and things can be moved about etc...) I am considering specifying Cisco ASA devices as the firewalls for both sites for all connections. Would it be possible to employ something like HSRC to provide a backup at Site 1 should the SDSL go down? I suppose the key aims here are that Site 2 can somehow failover to initiate a VPN to the ASA behind the ADSL at Site 1. I will have a 21 subnet mask on all internet connections so can play with Class C routing if need be... If I'm barking up the wrong tree with HSRC, is there another way I can acheive this without massive expenditure on Barracuda routers et al? Many Thanks.

    Read the article

  • error in php not logging or displaying

    - by Grant M
    I can not get any errors to display on screen on write to a log file. When check phpinfo() print out I have same value of master a local for display_errors On display_startup_errors On error_log /var/log/php.log error_reporting E_ALL & ~E_NOTICE log_errors On log_errors_max_len ls -l /var/log/php.log is -rw-rw-rw- 1 root root 0 Jun 21 07:47 /var/log/php.log for /var and /varlog drwxrwxrwx 23 root root 4096 Jun 2 11:13 var when there is an error in the code the page the browsers shows nothing and browser says there is no source for the page. Any suggestions of where else to look or change to errors to appear somewhere (anywhere would be good) edit: my error script is now <?php ini_set('display_errors', 1); error_reporting(E_ALL); echo "print from error.php 2 "; error //print from erroerror to cuase logging to happen. ?> this will print on display and to log Notice: Use of undefined constant error - assumed 'error' in /var/www/piku_dev2/error.php on line 7 but if I put garbage like #@$%$ on the error line I get nor error messages anywhere. Edit2: The problem turned out to in the httpd.conf file. I don't know what it was yet as it was fixed y someone else.

    Read the article

  • authbind, privbind or iptables REDIRECT (port 80 to 8080)?

    - by chris_l
    Hi, I'd like to run Glassfish v3 as a non-privileged user on Linux (Debian), but make it available on port 80. I'm currently doing this with iptables: iptables -t nat -I PREROUTING -p tcp -d x.x.x.x --dport 80 -j REDIRECT --to-port 8080 This works, but I wonder: If this has any significant performance impact compared to binding directly to port 80 If I could make a similar setup also work for HTTPS (or if that must run on 443) If there's a way to avoid other users from binding to port 8080 (in case my server crashes) - maybe block that port permanently to other users somehow? ...or if I should use authbind/privbind instead? Problem: I couldn't make it work with authbind or privbind so far. For authbind, I edited asadmin's last line to: exec authbind --deep "$JAVA" -Djava.net.preferIPv4Stack=true -jar ... For privbind: exec privbind -u glassfish "$JAVA" -Djava.net.preferIPv4Stack=true -jar ... (Only) with these settings, I can successfully perform a create-domain --domainport 80. This proves, that authbind and privbind actually work (the authbind version of the script is called by the glassfish user; the privbind version is called by root of course). However, in both cases I get the following exception, when starting the domain (start-domain): [#|2010-03-20T13:25:21.925+0100|SEVERE|glassfishv3.0|javax.enterprise.system.core.com.sun.enterprise.v3.server|_ThreadID=11;_ThreadName=FelixStartLevel;|Shutting down v3 due to startup exception : Permission denied: 80=com.sun.enterprise.v3.services.impl.monitor.MonitorableSelectorHandler@1fc25e5|#] I haven't found a solution for that yet (after searching the web, it seems, that this isn't so easy?) But maybe, the solution with iptables is good enough - what do you think? Thanks, Chris

    Read the article

  • rr.com appended to URL and I don't know why

    - by Steph
    I've been having some pretty bad and intermittent internet connectivity issues. I keep getting timeouts on my browsers, or what appears to be timeouts on my browsers. In Chrome it's generally error 21. FF it times out. And so on. While this is happening, I can go into the command line and ping or traceroute the same domain and it works fine. I use my cellphone on the same network and it's fine connecting to the same domain. And when it fails, it's all domains that are down in all browsers, chrome, FF, etc. I also noticed that when I try to connect to 192.168.1.1 it says in chrome did you mean www.192.168.1.1rr.com but when I enter https://192.168.1.1 it's fine. It only seems to do this in Chrome. This is making me think I have a virus. I did some researching about something called road runner, but I can't find any related traces. I also ran a full virus scan using nod32 (eset) and nothing. Any suggestion or help would be greatly appreciated. The intermittent loss of total internet access is really annoying and I'm worried about why it's trying to append the rr.com domain in Chrome. I suspect I'm dealing with two different issues, but you never know. Also for the DNS I'm using Google's DNS servers, the famous 8.8.8.8 and 8.8.8.4

    Read the article

  • Getting 400 Bad Request when requesting by server name on nginx/uwsgi

    - by Marc Hughes
    I'm trying to run 2 different sites on nginx via different ports (they each have a load balancer that points to the appropriate port). The first site work perfectly. The second site... If I access http://localhost:81/ it works correctly If I access http://127.0.01:81/ it works correctly If I access the hostname http://THEHOSTNAME:81/ it fails with a 400 error If I access the public IP http://x.x.x.x:81/ it fails with a 400 error I've set the error_log to info, but the only lines I get in the log when this happens is: ==> /var/log/nginx/access.log <== 10.183.38.141 - - [24/Aug/2014:21:03:28 +0000] "GET / HTTP/1.1" 400 37 "-" "curl/7.36.0" "-" ==> /var/log/nginx/error.log <== 2014/08/24 21:03:28 [info] 7029#0: *5 client 10.183.38.141 closed keepalive connection In my uwsgi log, I only see this: [pid: 6870|app: 0|req: 87/92] 10.28.23.224 () {32 vars in 380 bytes} [Sun Aug 24 21:05:21 2014] GET / => generated 26 bytes in 1 msecs (HTTP/1.1 400) 2 headers in 82 bytes (1 switches on core 2) What should be my next step in debugging this?

    Read the article

  • MySQL tmpdir on /dev/shm with SELinux

    - by smorfnip
    On RHEL5, I have a small MySQL database that has to write temp files. To speed up this process, I would like to move the temporary directory to /dev/shm by putting the following line into my.cnf: tmpdir=/dev/shm/mysqltmp I can create /dev/shm/mysqltmp just fine and do chown mysql:mysql /dev/shm/mysqltmp chcon --reference /tmp/ /dev/shm/mysqltmp I've tried to make SELinux happy by applying the same settings that are in effect for /tmp/ (and /var/tmp/), which is presumably where MySQL is writing its tmp files if tmpdir is undefined. The problem is that SELinux complains about MySQL having access to that directory. I get the following in /var/log/messages: SELinux is preventing mysqld (mysqld_t) "getattr" to /dev/shm (tmpfs_t). SELinux is a hard mistress. Details: Source Context root:system_r:mysqld_t Target Context system_u:object_r:tmpfs_t Target Objects /dev/shm [ dir ] Source mysqld Source Path /usr/libexec/mysqld Port <Unknown> Host db.example.com Source RPM Packages mysql-server-5.0.77-3.el5 Target RPM Packages Policy RPM selinux-policy-2.4.6-255.el5_4.1 Selinux Enabled True Policy Type targeted MLS Enabled True Enforcing Mode Enforcing Plugin Name catchall_file Host Name db.example.com Platform Linux db.example.com 2.6.18-164.2.1.el5 #1 SMP Mon Sep 21 04:37:42 EDT 2009 x86_64 x86_64 Alert Count 46 First Seen Wed Nov 4 14:23:48 2009 Last Seen Thu Nov 5 09:46:00 2009 Local ID e746d880-18f6-43c1-b522-a8c0508a1775 ls -lZ /dev/shm shows drwxrwxr-x mysql mysql system_u:object_r:tmp_t mysqltmp and permissions for /dev/shm itself are drwxrwxrwt root root system_u:object_r:tmpfs_t shm I've also tried chcon -R -t mysqld_t /dev/shm/mysqltmp and setting the group on /dev/shm to mysql with no better results. Shouldn't it be enough to tell SELinux, hey, this is a temp directory just like MySQL was using before? Short of turning off SELinux, how do I make this work? Do I need to edit SELinux policy files?

    Read the article

  • Linux (NAS) Permissions problem (Permission Denied)

    - by calumbrodie
    This is probably easier to show than to explain... -bash-3.2$ id uid=501(admin) gid=503(admin) groups=100(users),501(admins),503(admin) -bash-3.2$ groups admin users admins -bash-3.2$ ls -l total 8 drwxrwxrwx 78 admin www 4096 Dec 9 09:02 Inbox drwxrwxrwx 21 admin www 4096 Dec 8 21:45 Movies drwxrwx--- 3 admin www 52 Dec 9 07:57 TV -bash-3.2$ cd Movies -bash-3.2$ ls -l total 20 drwxrwx--- 7 admin www 4096 Dec 8 00:04 Action drwxrwx--- 6 admin www 4096 Dec 8 00:05 Animation drwxrwx--- 4 admin www 4096 Dec 8 00:17 Comedy drwxrwx--- 4 admin www 4096 Dec 8 00:14 Drama drwxrwx--- 4 admin www 4096 Dec 8 00:14 Family drwxrwx--- 6 admin www 58 Dec 6 19:10 Foreign Language drwxrwx--- 2 admin www 31 Dec 7 23:58 Horror drwxrwx--- 3 admin www 50 Dec 8 00:15 Science Fiction drwxrwx--- 2 admin www 6 Dec 8 00:16 Thriller -bash-3.2$ cd ../Inbox -bash: cd: ../Inbox: Permission denied Filesystem is XFS. Are there permissions on the directories that ls -l wouldn't show? I'm the owner of all directories and files inside them. I can sudo to modify the file permissions or view the contents of the folders but I need them to be accessible by 'admin'. Any ideas? I'll be checking the question regularly so let me know if I need to update this with more information. Thanks Edit : Added strace execve("/bin/ls", ["ls", "Inbox"], [/* 21 vars */]) = 0 brk(0) = 0x26000 uname({sys="Linux", node="axentraserver.the-brodie-stora.mystora.com", ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001c000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=17972, ...}) = 0 mmap2(NULL, 17972, PROT_READ, MAP_PRIVATE, 3, 0) = 0x4001d000 close(3) = 0 open("/lib/librt.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0P\25\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=39776, ...}) = 0 mmap2(NULL, 57816, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40025000 mprotect(0x4002b000, 28672, PROT_NONE) = 0 mmap2(0x40032000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5) = 0x40032000 close(3) = 0 open("/lib/libacl.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\0\24\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=134375, ...}) = 0 mmap2(NULL, 54368, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40034000 mprotect(0x4003a000, 28672, PROT_NONE) = 0 mmap2(0x40041000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5) = 0x40041000 close(3) = 0 open("/lib/libselinux.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\2147\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=297439, ...}) = 0 mmap2(NULL, 117504, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40042000 mprotect(0x40056000, 28672, PROT_NONE) = 0 mmap2(0x4005d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x13) = 0x4005d000 close(3) = 0 open("/lib/libgcc_s.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\10\"\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=43164, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40022000 mmap2(NULL, 74572, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x4005f000 mprotect(0x4006a000, 28672, PROT_NONE) = 0 mmap2(0x40071000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0xa) = 0x40071000 close(3) = 0 open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0XI\1\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=1517948, ...}) = 0 mmap2(NULL, 1245628, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40072000 mprotect(0x40195000, 32768, PROT_NONE) = 0 mmap2(0x4019d000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x123) = 0x4019d000 mmap2(0x401a0000, 8636, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x401a0000 close(3) = 0 open("/lib/libpthread.so.0", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\230A\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=121044, ...}) = 0 mmap2(NULL, 115184, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401a3000 mprotect(0x401b5000, 28672, PROT_NONE) = 0 mmap2(0x401bc000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x11) = 0x401bc000 mmap2(0x401be000, 4592, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x401be000 close(3) = 0 open("/lib/libattr.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\364\f\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=40571, ...}) = 0 mmap2(NULL, 45512, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401c0000 mprotect(0x401c3000, 32768, PROT_NONE) = 0 mmap2(0x401cb000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3) = 0x401cb000 close(3) = 0 open("/lib/libdl.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\254\10\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=15344, ...}) = 0 mmap2(NULL, 41116, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401cc000 mprotect(0x401ce000, 28672, PROT_NONE) = 0 mmap2(0x401d5000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1) = 0x401d5000 close(3) = 0 open("/lib/libsepol.so.1", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\330/\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=228044, ...}) = 0 mmap2(NULL, 301748, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x401d7000 mprotect(0x4020f000, 28672, PROT_NONE) = 0 mmap2(0x40216000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x37) = 0x40216000 mmap2(0x40217000, 39604, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x40217000 close(3) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40221000 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x40222000 set_tls(0x40221d00, 0x40221d00, 0x40024000, 0x402223e8, 0x41) = 0 mprotect(0x401d5000, 4096, PROT_READ) = 0 mprotect(0x401bc000, 4096, PROT_READ) = 0 mprotect(0x4019d000, 8192, PROT_READ) = 0 mprotect(0x4005d000, 4096, PROT_READ) = 0 mprotect(0x40032000, 4096, PROT_READ) = 0 mprotect(0x40023000, 4096, PROT_READ) = 0 munmap(0x4001d000, 17972) = 0 set_tid_address(0x402218a8) = 9539 set_robust_list(0x402218b0, 0xc) = 0 rt_sigaction(SIGRTMIN, {0x401a6d90, [], SA_SIGINFO|0x4000000}, NULL, 8) = 0 rt_sigaction(SIGRT_1, {0x401a6c64, [], SA_RESTART|SA_SIGINFO|0x4000000}, NULL, 8) = 0 rt_sigprocmask(SIG_UNBLOCK, [RTMIN RT_1], NULL, 8) = 0 getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0 brk(0) = 0x26000 brk(0x47000) = 0x47000 open("/proc/mounts", O_RDONLY|O_LARGEFILE) = 3 fstat64(3, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "rootfs / rootfs rw 0 0\nubi0:root"..., 1024) = 1024 read(3, "fs.xino,noplink,create=mfs,sum,b"..., 1024) = 428 read(3, "", 1024) = 0 close(3) = 0 munmap(0x4001d000, 4096) = 0 access("/etc/selinux/", F_OK) = 0 open("/etc/selinux/config", O_RDONLY|O_LARGEFILE) = -1 ENOENT (No such file or directory) ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(1, TIOCGWINSZ, {ws_row=52, ws_col=153, ws_xpixel=918, ws_ypixel=728}) = 0 stat64("Inbox", {st_mode=S_IFDIR|0777, st_size=4096, ...}) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/nsswitch.conf", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=1696, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "#\n# /etc/nsswitch.conf\n#\n# An ex"..., 4096) = 1696 read(3, "", 4096) = 0 close(3) = 0 munmap(0x4001d000, 4096) = 0 open("/etc/ld.so.cache", O_RDONLY) = 3 fstat64(3, {st_mode=S_IFREG|0644, st_size=17972, ...}) = 0 mmap2(NULL, 17972, PROT_READ, MAP_PRIVATE, 3, 0) = 0x4001d000 close(3) = 0 open("/lib/libnss_files.so.2", O_RDONLY) = 3 read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0(\0\1\0\0\0\304\27\0\0004\0\0\0"..., 512) = 512 fstat64(3, {st_mode=S_IFREG|0755, st_size=49256, ...}) = 0 mmap2(NULL, 70316, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x40223000 mprotect(0x4022c000, 28672, PROT_NONE) = 0 mmap2(0x40233000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x8) = 0x40233000 close(3) = 0 mprotect(0x40233000, 4096, PROT_READ) = 0 munmap(0x4001d000, 17972) = 0 open("/etc/passwd", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=1661, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "root:x:0:0:root:/root:/bin/bash\n"..., 4096) = 1661 close(3) = 0 munmap(0x4001d000, 4096) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 3 fcntl64(3, F_GETFL) = 0x2 (flags O_RDWR) fcntl64(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(3, {sa_family=AF_FILE, path="/var/run/nscd/socket"}, 110) = -1 ENOENT (No such file or directory) close(3) = 0 open("/etc/group", O_RDONLY) = 3 fcntl64(3, F_GETFD) = 0 fcntl64(3, F_SETFD, FD_CLOEXEC) = 0 fstat64(3, {st_mode=S_IFREG|0644, st_size=700, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x4001d000 read(3, "root:x:0:root\nbin:x:1:root,bin,d"..., 4096) = 700 close(3) = 0 munmap(0x4001d000, 4096) = 0 open("Inbox", O_RDONLY|O_NONBLOCK|O_LARGEFILE|O_DIRECTORY) = -1 EACCES (Permission denied) write(2, "ls: ", 4ls: ) = 4 write(2, "Inbox", 5Inbox) = 5 write(2, ": Permission denied", 19: Permission denied) = 19 write(2, "\n", 1 ) = 1 close(1) = 0 exit_group(2) = ? 2nd edit: Elaboration for Mike. The Inbox sits at the following location /home/admin/MyLibrary/MyVideos/Inbox /home/admin/MyLibrary/MyVideos/Movies The system is a Netgear Stora NAS box that I have root access to. The /home/ folder is mounted as an smb share on various computers around the house. The folder /Inbox cannot be opened on any of those machines (they all connect as 'admin'). When I ssh into the box using the 'admin' credentials I am also unable to access the folder. The folder was created via a Web Admin page hosted on the NAS. The user/group for the Inbox folder was previously apache:www (expected as this folder was created by the web application), but I chmod/chowned the folder as the root user in an attempt to grant the admin user (therefore the rest of the connected machines) access to the files. Sorry for not including this earlier, I wasn't sure if it was relevant and didn't want to confuse the situation. -Thanks 3rd Edit Sorry again - It looks like this NAS is running some custom version of Red Hat, not Debian as previously stated - I'm not sure if this makes a difference

    Read the article

  • Web Deploy 3.0 Installation Fails

    - by jkarpilo
    I am having difficulty installing Microsoft Web Deploy 3.0 to a Windows Server 2008 R2 box. I have tried installing with both the Web Platform Installer and the MSI package but installation fails while trying to execute the MSI custom action ExecuteRegisterUIModuleCA. This server is a VM and a member of a farm but shared config is disabled while I'm installing. Here's the point at which it fails in the MSI log (starting at line 1875): MSI (s) (80:FC) [15:29:01:358]: Executing op: ActionStart(Name=IISBeginTransactionCA,,) MSI (s) (80:FC) [15:29:01:374]: Executing op: CustomActionSchedule(Action=IISBeginTransactionCA,ActionType=3073,Source=BinaryData,Target=IISBeginTransactionCA,) MSI (s) (80:A8) [15:29:01:374]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI6C6A.tmp, Entrypoint: IISBeginTransactionCA MSI (s) (80:FC) [15:29:01:436]: Executing op: ActionStart(Name=IISRollbackTransactionCA,,) MSI (s) (80:FC) [15:29:01:436]: Executing op: CustomActionSchedule(Action=IISRollbackTransactionCA,ActionType=3329,Source=BinaryData,Target=IISRollbackTransactionCA,) MSI (s) (80:FC) [15:29:01:436]: Executing op: ActionStart(Name=IISCommitTransactionCA,,) MSI (s) (80:FC) [15:29:01:436]: Executing op: CustomActionSchedule(Action=IISCommitTransactionCA,ActionType=3585,Source=BinaryData,Target=IISCommitTransactionCA,) MSI (s) (80:FC) [15:29:01:436]: Executing op: ActionStart(Name=IISExecuteCA,,) MSI (s) (80:FC) [15:29:01:452]: Executing op: CustomActionSchedule(Action=IISExecuteCA,ActionType=3073,Source=BinaryData,Target=IISExecuteCA,CustomActionData=1^3^21^WebDeployment_Current^154^Microsoft.Web.Deployment.UI.PackagingModuleProvider, Microsoft.Web.Deployment.UI.Server, Version=9.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35^1^1^0^^1^3^28^DelegationManagement_Current^171^Microsoft.Web.Management.Delegation.DelegationModuleProvider, Microsoft.Web.Management.Delegation.Server, Version=9.0.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35^1^1^0^^1^7^38^system.webServer/management/delegation^4^Deny^16^MachineToWebRoot^0^^3^yes^1^7^31^system.webServer/wdeploy/backup^4^Deny^20^MachineToApplication^0^^2^no^) MSI (s) (80:84) [15:29:01:452]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI6CB9.tmp, Entrypoint: IISExecuteCA 1: IISCA IISExecuteCA : Begin CA Setup 1: IISCA IISExecuteCA : CA 'ExecuteRegisterUIModuleCA' completed with return code hr=0x8007000d 1: IISCA IISExecuteCA : CA 'IISExecuteCA' completed with return code hr=0x8007000d 1: IISCA IISExecuteCA : End CA Setup CustomAction IISExecuteCA returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox) Action ended 15:29:05: InstallFinalize. Return value 3. I can't seem to find any information regarding this particular issue; can someone help point me in the right direction?

    Read the article

  • IP Tables won't save the rule.

    - by ArchUser
    Hello, I'm using ArchLinux and I have an IP tables rule that I know works (from my other server), and it's in /etc/iptables/iptables.rules, it's the only rule set in that directory. I run, /etc/rc.d/iptables save, then /etc/rc.d/iptables/restart, but when I do "iptables --list", I get ACCEPTs on INPUT,FORWARD & OUTPUT. # Generated by iptables-save v1.4.8 on Sat Jan 8 18:42:50 2011 *filter :INPUT DROP [0:0] :FORWARD DROP [0:0] :OUTPUT ACCEPT [216:14865] :BRUTEGUARD - [0:0] :interfaces - [0:0] :open - [0:0] -A INPUT -p icmp -m icmp --icmp-type 18 -j DROP -A INPUT -p icmp -m icmp --icmp-type 17 -j DROP -A INPUT -p icmp -m icmp --icmp-type 10 -j DROP -A INPUT -p icmp -m icmp --icmp-type 9 -j DROP -A INPUT -p icmp -m icmp --icmp-type 5 -j DROP -A INPUT -p icmp -j ACCEPT -A INPUT -m state --state RELATED,ESTABLISHED -j ACCEPT -A INPUT -j interfaces -A INPUT -j open -A INPUT -p tcp -j REJECT --reject-with tcp-reset -A INPUT -p udp -j REJECT --reject-with icmp-port-unreachable -A INPUT -p tcp -m tcp ! --tcp-flags FIN,SYN,RST,ACK SYN -m state --state NEW -j DROP -A INPUT -f -j DROP -A INPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG FIN,SYN,RST,PSH,ACK,URG -j DROP -A INPUT -p tcp -m tcp --tcp-flags FIN,SYN,RST,PSH,ACK,URG NONE -j DROP -A INPUT -i eth+ -p icmp -m icmp --icmp-type 8 -j DROP -A BRUTEGUARD -m recent --set --name BF --rsource -A BRUTEGUARD -m recent --update --seconds 600 --hitcount 20 --name BF --rsource -j LOG --log-prefix "[BRUTEFORCE ATTEMPT] " --log-level 6 -A BRUTEGUARD -m recent --update --seconds 600 --hitcount 20 --name BF --rsource -j DROP -A interfaces -i lo -j ACCEPT -A open -p tcp -m tcp --dport 80 -j ACCEPT -A open -p tcp -m tcp --dport 10011 -j ACCEPT -A open -p udp -m udp --dport 9987 -j ACCEPT -A open -p tcp -m tcp --dport 30033 -j ACCEPT -A open -p tcp -m tcp --dport 8000 -j ACCEPT -A open -p tcp -m tcp --dport 8001 -j ACCEPT -A open -s 76.119.125.61 -p tcp -m tcp --dport 21 -j ACCEPT -A open -s 76.119.125.61 -p tcp -m tcp --dport 3306 -j ACCEPT -A open -p tcp -m tcp --dport 22 -j BRUTEGUARD -A open -s 76.119.125.61 -p tcp -m tcp --dport 22 -m state --state NEW,RELATED,ESTABLISHED -j ACCEPT COMMIT # Completed on Sat Jan 8 18:42:50 2011

    Read the article

  • haproxy and tomcat intermittent hangs

    - by user7347
    I am trying to run haproxy in front of tomcat on a Solaris x86 box, but I am getting intermittent failures. At seemingly random intervals, the request just hangs until haproxy times out the connection. I thought maybe it was my app, but I've been able to reproduce it with the tomcat manager app, and hitting tomcat directly there is no problems at all. Hitting it repeatedly with curl will cause the error within 10-15 tries curl -ikL http://admin:admin@<my server>:81/manager/status haproxy is running on port 81, tomcat on port 7000. haproxy returns a 504 gateway timeout to the client, and puts this into the log file: Sep 7 21:39:53 localhost haproxy[16887]: xxx.xxx.xxx.xxx:65168 [07/Sep/2009:21:39:23.005] http_proxy http_proxy/tomcat7000 5/0/0/-1/30014 504 194 - - sHNN 0/0/0/0/0 0/0 "GET /manager/status HTTP/1.1" Tomcat shows nothing, no error in the logs and no indication that the request ever makes it to the tomcat server. The request count is not incremented, the manager app only shows activity on one thread, serving up the manager app. Here are my haproxy and tomcat connector settings, I've been playing with both a good deal trying to chase down the issue, so they may not be ideal, but they definitely don't seem like they should cause this error. server.xml <Connector port="7000" protocol="HTTP/1.1" enableLookups="false" maxKeepAliveRequests="1" connectionLinger="10" /> haproxy config global log loghost local0 chroot /var/haproxy listen http_proxy :81 mode http log global option httplog option httpclose clitimeout 150000 srvtimeout 30000 contimeout 3000 balance roundrobin cookie SERVERID insert server tomcat7000 127.0.0.1:7000 cookie server00 check inter 2000

    Read the article

  • bind9 "error sending response: host unreachable"

    - by wolfgangsz
    of course), I have a number of DNS servers, all running bind9 (9.5.1, to be specific) under fedora. 4 of them are slaves, fed by a common master for our public DNS. These are all located on the public gateways of our various offices. One of them has tons of messages in its log files similar to these: Jul 21 17:26:18 gateway named[3487]: client 10.171.3.8#52500: view internal: error sending response: host unreachable I wonder where that comes from. The firewall is open on port 53 between the two machines (10.171.3.8 is an internal DNS server located on a Windows Domain Controller). The internal domains do NOT list the gateway as a name server (so there should not be any attempts of replicating the domains), and the gateway does not handle any internal DNS. The clients in these messages vary between the two domain controllers on the internal network and a third internal name server (running bind9 on debian in a different segment of the network). Any pointers are highly welcome. In response to the first reply: The issue with this really is that tcpdump doesn't show any problems. Here is an extract from "tcpdump -i any port 53" 09:13:38.283308 IP valine.aminocom.com.61815 ns-pri.ripe.net.domain: 14075 PTR? 166.225.58.95.in-addr.arpa. (44) 09:13:42.007410 IP gateway-eng.aminocom.com.37047 alanine.aminocom.com.domain: 35410+ PTR? 12.3.172.10.in-addr.arpa. (42) At the same time, the DNS log shows: Jul 22 09:13:38 gateway named[3487]: client 10.171.3.6#61300: view internal: error sending response: host unreachable Jul 22 09:13:40 gateway named[3487]: client 10.172.3.12#56230: view internal: error sending response: host unreachable Jul 22 09:13:40 gateway named[3487]: client 10.171.3.8#55221: view internal: error sending response: host unreachable Jul 22 09:13:49 gateway named[3487]: client 10.171.3.8#51342: view internal: error sending response: host unreachable So clearly at 09:13:40 there were two unsuccessful attempts to connect to internal machines (10.172.3.12 and 10.171.3.8, both are DNS servers), but nothing in the tcpdump output.

    Read the article

  • Disabling CPU management

    - by Tiffany Walker
    If I add the following processor.max_cstate=0 to the kernel command line for boot up, does that disable all CPU power management and throttling? I also found: http://www.experts-exchange.com/OS/Linux/Administration/A_3492-Avoiding-CPU-speed-scaling-in-modern-Linux-distributions-Running-CPU-at-full-speed-Tips.html The link talks of Change CPU governor from 'ondemand' to 'performance' for all CPUs/cores and disabling kondemand from kernel. Server is for web hosting UPDATES: 2.6.32-379.1.1.lve1.1.7.6.el6.x86_64 #1 SMP Sat Aug 4 09:56:37 EDT 2012 x86_64 x86_64 x86_64 GNU/Linux . # dmidecode 2.11 SMBIOS 2.6 present. 74 structures occupying 2878 bytes. Table at 0x0009F000. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: American Megatrends Inc. Version: 1.0c Release Date: 05/27/2010 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 4096 kB Characteristics: ISA is supported PCI is supported PNP is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Targeted content distribution is supported BIOS Revision: 8.16 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Supermicro Product Name: X8SIE Version: 0123456789 Serial Number: 0123456789 UUID: 49434D53-0200-9033-2500-33902500D52C Wake-up Type: Power Switch SKU Number: To Be Filled By O.E.M. Family: To Be Filled By O.E.M. Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: Supermicro Product Name: X8SIE Version: 0123456789 Serial Number: VM11S61561 Asset Tag: To Be Filled By O.E.M. Features: Board is a hosting board Board is replaceable Location In Chassis: To Be Filled By O.E.M. Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0003, DMI type 3, 21 bytes Chassis Information Manufacturer: Supermicro Type: Sealed-case PC Lock: Not Present Version: 0123456789 Serial Number: 0123456789 Asset Tag: To Be Filled By O.E.M. Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0

    Read the article

  • Apache, Tomcat 5 and problem with HTTP basic auth

    - by Juha Syrjälä
    I have setup a Tomcat with a webapp that uses http basic auth in some of its URLs. There is a Apache server in front of the Tomcat. I have setup Apache as a proxy like this (all traffic should go directly to tomcat): /etc/httpd/conf.d/proxy_ajp.conf: LoadModule proxy_ajp_module modules/mod_proxy_ajp.so ProxyPass / ajp://localhost:8009/ ProxyPassReverse / ajp://localhost:8009/ There is a webapp installed to root of Tomcat (ROOT.war), so I should be able to use http://localhost/ to access my webapp. But it is not working with http basic auth. The problem is that everything works until I try to access URL that are protected by the HTTP basic auth. URLs without authentication work just fine. When accessing this url via apache I am getting an error message from Apache. If I access the same URL directly from tomcat, everything works just fine. I am getting this to Apache error log: [Wed Sep 01 21:34:01 2010] [error] proxy: dialog to [::1]:8009 (localhost) failed access log looks like this: ::1 - - [01/Sep/2010:21:34:01 +0300] "GET /protected_path/ HTTP/1.0" 503 360 "-" "w3m/0.5.2" I am using: Fedora release 13 (Goddard) httpd-2.2.16-1.fc13.x86_64 tomcat5-5.5.27-7.4.fc12.noarch The basic auth is implemented in the webapp (not in Apache or Tomcat). The webapp is actually implemented in Scala/Lift, but that shouldn't matter. The auth works if I access the tomcat directly. Error message that I am getting from Apache. It is curious that the title is Unauthorized and not Internal error: Unauthorized The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later. Apache/2.2.16 (Fedora) Server at my.server.name.com Port 80 It could be that Apache is seeing a some thing else than 200 OK response and thinks that it is an error when it actually should pass the received 401 Unauthorized response directly to browser. If this is the problem, how to fix it?

    Read the article

  • FreeBSD Traffic Shaping

    - by alexus
    Hi I'm trying to do traffic shaping with FreeBSD, here are my rules su-3.2# ipfw show | grep pipe 08380 1514852 125523804 pipe 1 tcp from any to any dst-port 80 su-3.2# ipfw pipe 1 show 00001: 2.000 Mbit/s 0 ms 50 sl. 1 queues (1 buckets) droptail mask: 0x00 0x00000000/0x0000 - 0x00000000/0x0000 BKT Prot ___Source IP/port____ ____Dest. IP/port____ Tot_pkt/bytes Pkt/Byte Drp 0 tcp 64.237.55.83/60598 72.21.81.133/80 6520267 1204533020 0 0 1216 su-3.2# first of all why when I run ipfw pipe 1 show i get same source and destination ip, that doesnt seem like ever change yet total packets/bytes increasing and most important question, after donig all that I'm looking at my MRTG stats and I see i'm very well over 2Mbit/s limit. what am I doing wrong? here is config file flush pipe flush pipe 1 config bw 2Mbit/s add 100 allow ip from any to any via lo0 add 200 deny ip from any to 127.0.0.0/8 add 300 deny ip from 127.0.0.0/8 to any add 8380 pipe 1 tcp from any to any src-port www uid daemon add 8380 pipe 1 tcp from any to any dst-port www uid daemon add 65000 pass all from any to any

    Read the article

  • Loading the 'pktgen' module on Ubuntu Server

    - by StackedCrooked
    I would like to enable and use the pktgen module on Ubuntu Server. I have enabed the module by adding a line containing 'pktgen' to the /etc/modules file. After rebooting it seems that the module is successfully loaded because the directory /proc/net/pktgen exists. However when trying to run the first sample I get these errors: root@ubuntu:~# bash ./pktgen.conf-1-1 Removing all devices Adding eth4 Setting max_before_softirq 10000 Configuring /proc/net/pktgen/eth4 ./pktgen.conf-1-1: line 9: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory ./pktgen.conf-1-1: line 9: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory ./pktgen.conf-1-1: line 9: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory ./pktgen.conf-1-1: line 9: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory ./pktgen.conf-1-1: line 9: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory ./pktgen.conf-1-1: line 9: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory cat: /proc/net/pktgen/eth4: No such file or directory Running... ctrl^C to stop Done It turns out the script simply unable to write a file to the /proc/net/pktgen directory. When I try this manually it fails as well: root@ubuntu:~# cd /proc/net/pktgen/ root@ubuntu:/proc/net/pktgen# touch eth4 touch: cannot touch `eth4': No such file or directory Can anyone help me make it work? I'm using Ubuntu version: 2.6.32-21-server. Fixed I apologize for keeping this post not up to date. I was able to fix it. If I remember well the cause of the error was that eth4 did not exist, or did not have the 'online' status. Anyway, it is fixed now.

    Read the article

  • Weird routing issue

    - by Joel Coel
    I'm having some weird internet problems on campus. I know it's something simple, but it's a case where I need another set of eyes. I think I can explain the problem best by posting a tracert: Tracing route to google.com [74.125.45.147] over a maximum of 30 hops: 1 3 ms 3 ms 3 ms 192.168.8.1 2 1 ms 1 ms 1 ms elissaemily-pc.york.edu [192.168.10.5] 3 2 ms 2 ms 2 ms rrcs-76-79-19-33.west.biz.rr.com [76.79.19.33] 4 31 ms 3 ms 2 ms ge-1-1-0.lnclne00-mx41.neb.rr.com [76.85.220.109] 5 20 ms 17 ms 17 ms ge-7-3-0.chcgill3-rtr1.kc.rr.com [76.85.220.137] 6 20 ms 20 ms 19 ms ae-5-0.cr0.chi30.tbone.rr.com [66.109.6.112] 7 19 ms 19 ms 24 ms ae-1-0.pr0.chi10.tbone.rr.com [66.109.6.155] 8 26 ms 24 ms 24 ms 74.125.48.109 9 23 ms 24 ms 21 ms 216.239.46.246 10 39 ms 39 ms 55 ms 209.85.242.215 11 39 ms 39 ms 39 ms 209.85.254.243 12 39 ms 40 ms 96 ms 209.85.253.145 13 39 ms 39 ms 39 ms yx-in-f147.1e100.net [74.125.45.147] Trace complete. Note the second entry in there. Not only is the host name a student's computer, but the ip address doesn't exist. Dhcp shows that host as having a different address and you can't ping any 192.168.10.5. Yet somehow it's routing packets for us (and not very well, either — things are slow right now). The basic network routing table looks like this: Destination Subnet Mask Gateway --------------------------------------- Default Route -- 10.1.1.5 (our firewall) 10.0.0.0 255.0.0.0 -- 192.168.8.0 255.255.252.0 --

    Read the article

  • Howo to get Multipath IO with Dell MD3600i into active/active setup?

    - by Disco
    I'm desperately trying to improve performance of my SAN connection. Here's what i have: [root@xnode1 dell]# multipath -ll mpath1 (36d4ae520009bd7cc0000030e4fe8230b) dm-2 DELL,MD36xxi [size=5.5T][features=3 queue_if_no_path pg_init_retries 50][hwhandler=1 rdac][rw] \_ round-robin 0 [prio=200][active] \_ 18:0:0:0 sdb 8:16 [active][ready] \_ 19:0:0:0 sdd 8:48 [active][ghost] \_ 20:0:0:0 sdf 8:80 [active][ghost] \_ 21:0:0:0 sdh 8:112 [active][ready] And multipath.conf : defaults { udev_dir /dev polling_interval 5 prio_callout none rr_min_io 100 max_fds 8192 user_friendly_names yes path_grouping_policy multibus default_features "1 fail_if_no_path" } blacklist { device { vendor "*" product "Universal Xport" } } devices { device { vendor "DELL" product "MD36xxi" path_checker rdac path_selector "round-robin 0" hardware_handler "1 rdac" failback immediate features "2 pg_init_retries 50" no_path_retry 30 rr_min_io 100 prio_callout "/sbin/mpath_prio_rdac /dev/%n" } } And sessions. [root@xnode1 dell]# iscsiadm -m session tcp: [13] 10.0.51.220:3260,1 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c tcp: [14] 10.0.50.221:3260,2 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c tcp: [15] 10.0.51.221:3260,2 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c tcp: [16] 10.0.50.220:3260,1 iqn.1984-05.com.dell:powervault.md3600i.6d4ae520009bd7cc000000004fd7507c I'm getting very poor read performance : dd if=/dev/mapper/mpath1 of=/dev/null bs=1M count=1000 The SAN is configured as follows: CTRL0,PORT0 : 10.0.50.220 CTRL0,PORT1 : 10.0.50.221 CTRL1,PORT0 : 10.0.51.220 CTRL1,PORT1 : 10.0.51.221 And on the host : IF0 : 10.0.50.1 IF1 : 10.0.51.1 (Dual 10GbE Ethernet Card Intel DA2) It's connected to a 10gbE switch dedicated for SAN traffic. My questions being; why the connection is set up as 'ghost' and not 'ready' like an active/active configuration ?

    Read the article

  • Getting Error while running RED5 server - class path resource [red5.xml] cannot be opened because it does not exist

    - by sunil221
    HI , I have installed java version "1.6.0_14" and Ant version 1.8.2 for red5 Server. when i am trying to run red5 server i am getting the following error please help Root: /usr/local/red5 Deploy type: bootstrap Logback selector: org.red5.logging.LoggingContextSelector Setting default logging context: default 11:27:39.838 [main] INFO org.red5.server.Launcher - Red5 Server 1.0.0 RC1 $Rev: 4171 $ (http://code.google.com/p/red5/) Red5 Server 1.0.0 RC1 $Rev: 4171 $ (http://code.google.com/p/red5/) SLF4J: Class path contains multiple SLF4J bindings. SLF4J: Found binding in [jar:file:/usr/local/red5/red5.jar!/org/slf4j/impl/StaticLoggerBinder.class] SLF4J: Found binding in [jar:file:/usr/local/red5/lib/logback-classic-0.9.26.jar!/org/slf4j/impl/StaticLoggerBinder.class] SLF4J: See http://www.slf4j.org/codes.html#multiple_bindings for an explanation. 11:27:39.994 [main] INFO o.s.c.s.FileSystemXmlApplicationContext - Refreshing org.springframework.context.support.FileSystemXmlApplicationContext@39d85f79: startup date [Mon Dec 21 11:27:39 EST 2009]; root of context hierarchy 11:27:40.149 [main] INFO o.s.b.f.xml.XmlBeanDefinitionReader - Loading XML bean definitions from class path resource [red5.xml] Exception org.springframework.beans.factory.BeanDefinitionStoreException: IOException parsing XML document from class path resource [red5.xml]; nested exception is java.io.FileNotFoundException: class path resource [red5.xml] cannot be opened because it does not exist Bootstrap complete

    Read the article

  • Parsing the output of "uptime" with bash

    - by Keek
    I would like to save the output of the uptime command into a csv file in a Bash script. Since the uptime command has different output formats based on the time since the last reboot I came up with a pretty heavy solution based on case, but there is surely a more elegant way of doing this. uptime output: 8:58AM up 15:12, 1 user, load averages: 0.01, 0.02, 0.00 desired result: 15:12,1 user,0.00 0.02 0.00, current code: case "`uptime | wc -w | awk '{print $1}'`" in #Count the number of words in the uptime output 10) #e.g.: 8:16PM up 2:30, 1 user, load averages: 0.09, 0.05, 0.02 echo -n `uptime | awk '{ print $3 }' | awk '{gsub ( ",","" ) ; print $0 }'`","`uptime | awk '{ print $4,$5 }' | awk '{gsub ( ",","" ) ; print $0 }'`","`uptime | awk '{ print $8,$9,$10 }' | awk '{gsub ( ",","" ) ; print $0 }'`"," ;; 12) #e.g.: 1:41pm up 105 days, 21:46, 2 users, load average: 0.28, 0.28, 0.27 echo -n `uptime | awk '{ print $3,$4,$5 }' | awk '{gsub ( ",","" ) ; print $0 }'`","`uptime | awk '{ print $6,$7 }' | awk '{gsub ( ",","" ) ; print $0 }'`","`uptime | awk '{ print $10,$11,$12 }' | awk '{gsub ( ",","" ) ; print $0 }'`"," ;; 13) #e.g.: 12:55pm up 105 days, 21 hrs, 2 users, load average: 0.26, 0.26, 0.26 echo -n `uptime | awk '{ print $3,$4,$5,$6 }' | awk '{gsub ( ",","" ) ; print $0 }'`","`uptime | awk '{ print $7,$8 }' | awk '{gsub ( ",","" ) ; print $0 }'`","`uptime | awk '{ print $11,$12,$13 }' | awk '{gsub ( ",","" ) ; print $0 }'`"," ;; esac

    Read the article

  • ZFS - Impact of L2ARC cache device failure (Nexenta)

    - by ewwhite
    I have an HP ProLiant DL380 G7 server running as a NexentaStor storage unit. The server has 36GB RAM, 2 LSI 9211-8i SAS controllers (no SAS expanders), 2 SAS system drives, 12 SAS data drives, a hot-spare disk, an Intel X25-M L2ARC cache and a DDRdrive PCI ZIL accelerator. This system serves NFS to multiple VMWare hosts. I also have about 90-100GB of deduplicated data on the array. I've had two incidents where performance tanked suddenly, leaving the VM guests and Nexenta SSH/Web consoles inaccessible and requiring a full reboot of the array to restore functionality. In both cases, it was the Intel X-25M L2ARC SSD that failed or was "offlined". NexentaStor failed to alert me on the cache failure, however the general ZFS FMA alert was visible on the (unresponsive) console screen. The zpool status output showed: pool: vol1 state: ONLINE scan: scrub repaired 0 in 0h57m with 0 errors on Sat May 21 05:57:27 2011 config: NAME STATE READ WRITE CKSUM vol1 ONLINE 0 0 0 mirror-0 ONLINE 0 0 0 c8t5000C50031B94409d0 ONLINE 0 0 0 c9t5000C50031BBFE25d0 ONLINE 0 0 0 mirror-1 ONLINE 0 0 0 c10t5000C50031D158FDd0 ONLINE 0 0 0 c11t5000C5002C823045d0 ONLINE 0 0 0 mirror-2 ONLINE 0 0 0 c12t5000C50031D91AD1d0 ONLINE 0 0 0 c2t5000C50031D911B9d0 ONLINE 0 0 0 mirror-3 ONLINE 0 0 0 c13t5000C50031BC293Dd0 ONLINE 0 0 0 c14t5000C50031BD208Dd0 ONLINE 0 0 0 mirror-4 ONLINE 0 0 0 c15t5000C50031BBF6F5d0 ONLINE 0 0 0 c16t5000C50031D8CFADd0 ONLINE 0 0 0 mirror-5 ONLINE 0 0 0 c17t5000C50031BC0E01d0 ONLINE 0 0 0 c18t5000C5002C7CCE41d0 ONLINE 0 0 0 logs c19t0d0 ONLINE 0 0 0 cache c6t5001517959467B45d0 FAULTED 2 542 0 too many errors spares c7t5000C50031CB43D9d0 AVAIL errors: No known data errors This did not trigger any alerts from within Nexenta. I was under the impression that an L2ARC failure would not impact the system. But in this case, it surely was the culprit. I've never seen any recommendations to RAID L2ARC. Removing the bad SSD entirely from the server got me back running, but I'm concerned about the impact of the device failure (and maybe the lack of notification from NexentaStor as well). Edit - What's the current best-choice SSD for L2ARC cache applications these days?

    Read the article

  • Is there any way for ME to improve routing to an overseas server?

    - by Simon Hartcher
    I am trying to make a connection to a gaming server in Asia from Australia, but my ISP routes my connection through the US. Tracing route to worldoftanks-sea.com [116.51.25.54]over a maximum of 30 hops: 1 <1 ms <1 ms <1 ms 192.168.1.1 2 34 ms 42 ms 45 ms 10.20.21.123 3 40 ms 40 ms 43 ms 202.7.173.145 4 51 ms 42 ms 36 ms syd-sot-ken-crt1-ge-6-0-0.tpgi.com.au [202.7.171.121] 5 175 ms 200 ms 195 ms ge5-0-5d0.cir1.seattle7-wa.us.xo.net [216.156.100.37] 6 212 ms 228 ms 229 ms vb2002.rar3.sanjose-ca.us.xo.net [207.88.13.150] 7 205 ms 204 ms 206 ms 207.88.14.226.ptr.us.xo.net [207.88.14.226] 8 207 ms 215 ms 220 ms xe-0.equinix.snjsca04.us.bb.gin.ntt.net [206.223.116.12] 9 198 ms 201 ms 199 ms ae-7.r20.snjsca04.us.bb.gin.ntt.net [129.250.5.52] 10 396 ms 391 ms 395 ms as-6.r20.sngpsi02.sg.bb.gin.ntt.net [129.250.3.89] 11 383 ms 384 ms 383 ms ae-3.r02.sngpsi02.sg.bb.gin.ntt.net [129.250.4.178] 12 364 ms 381 ms 359 ms wotsg1-slave-54.worldoftanks.sg [116.51.25.54] Trace complete. Since I think it will be unlikely that my ISP will do anything, are there any ways to improve my routing to the server without them having to intervene? NB. The game runs predominately over UDP, so I believe most low ping services are out of the question, as they rely on TCP traffic.

    Read the article

  • pure-ftpd not listening on specified port

    - by Jason McLaren
    I installed the pure-ftpd package (version 1.0.35-1) on an Ubuntu 12.04 box (an EC2 instance based on the standard Ubuntu 12.04 AMI). The pure-ftpd daemon is running (verified with ps), though there is no PID file (expected one to be created by the /etc/init.d/pure-ftpd script). Here's the resulting command that gets run by the init.d script: /usr/sbin/pure-ftpd -l pam -O clf:/var/log/pure-ftpd/transfer.log -o -8 UTF-8 -u 1000 -E -B -g /var/run/pure-ftpd/pure-ftpd.pid Here's my real problem: the ftp server isn't actually listening on any port (checked with netstat and nmap). So I can't ftp to the server (either locally using localhost or remotely using the public IP address). I tried adding a Bind file to /etc/pure-ftpd/conf and restarting, but it didn't help. When I installed pure-ftpd, it replaced inetd with openbsd-inetd, but did not run it since there were no services enabled. So inetd is not listening on port 21 either. (Apparently Ubuntu has a no-inetd-by-default policy, according to https://lists.ubuntu.com/archives/ubuntu-users/2010-September/227905.html .) I want to run pure-ftpd by itself (not with inetd) anyways, since the /etc/init.d/pure-ftpd script requires no inetd if you use the UploadScript feature. I'm not familiar with how Ubuntu handles network services (and can't find any relevant docs besides generic man pages), so I'm probably missing something obvious. Nothing seems out of the ordinary with /etc/hosts.allow (empty) or hosts.deny (empty), and I didn't add any firewall rules (iptables -L shows that the firewall is in its initial state). I've checked the pure-ftpd docs; not sure what else to look at. Any help would be appreciated, thanks!

    Read the article

  • Getting Error while running RED5 server - class path resource [red5.xml] cannot be opened because it does not exist

    - by sunil221
    HI , I have installed java version "1.6.0_14" and Ant version 1.8.2 for red5 Server. when i am trying to run red5 server i am getting the following error please help Root: /usr/local/red5 Deploy type: bootstrap Logback selector: org.red5.logging.LoggingContextSelector Setting default logging context: default 11:27:39.838 [main] INFO org.red5.server.Launcher - Red5 Server 1.0.0 RC1 $Rev: 4171 $ (http://code.google.com/p/red5/) Red5 Server 1.0.0 RC1 $Rev: 4171 $ (http://code.google.com/p/red5/) SLF4J: Class path contains multiple SLF4J bindings. SLF4J: Found binding in [jar:file:/usr/local/red5/red5.jar!/org/slf4j/impl/StaticLoggerBinder.class] SLF4J: Found binding in [jar:file:/usr/local/red5/lib/logback-classic-0.9.26.jar!/org/slf4j/impl/StaticLoggerBinder.class] SLF4J: See http://www.slf4j.org/codes.html#multiple_bindings for an explanation. 11:27:39.994 [main] INFO o.s.c.s.FileSystemXmlApplicationContext - Refreshing org.springframework.context.support.FileSystemXmlApplicationContext@39d85f79: startup date [Mon Dec 21 11:27:39 EST 2009]; root of context hierarchy 11:27:40.149 [main] INFO o.s.b.f.xml.XmlBeanDefinitionReader - Loading XML bean definitions from class path resource [red5.xml] Exception org.springframework.beans.factory.BeanDefinitionStoreException: IOException parsing XML document from class path resource [red5.xml]; nested exception is java.io.FileNotFoundException: class path resource [red5.xml] cannot be opened because it does not exist Bootstrap complete

    Read the article

  • Apache 2.2, worker mpm, mod_fcgid and PHP: Can't apply process slot

    - by mopoke
    We're having an issue on an apache server where every 15 to 20 minutes it stops serving PHP requests entirely. On occasions it will return a 503 error, other times it will recover enough to serve the page but only after a delay of a minute or more. Static content is still served during that time. In the log file, there's errors reported along the lines of: [Wed Sep 28 10:45:39 2011] [warn] mod_fcgid: can't apply process slot for /xxx/ajaxfolder/ajax_features.php [Wed Sep 28 10:45:41 2011] [warn] mod_fcgid: can't apply process slot for /xxx/statics/poll/index.php [Wed Sep 28 10:45:45 2011] [warn] mod_fcgid: can't apply process slot for /xxx/index.php [Wed Sep 28 10:45:45 2011] [warn] mod_fcgid: can't apply process slot for /xxx/index.php There is RAM free and, indeed, it seems that more php processes get spawned. /server-status shows lots of threads in the "W" state as well as some FastCGI processes in "Exiting(communication error)" state. I rebuilt mod_fcgid from source as the packaged version was quite old. It's using current stable version (2.3.6) of mod_fcgid. FCGI config: FcgidBusyScanInterval 30 FcgidBusyTimeout 60 FcgidIdleScanInterval 30 FcgidIdleTimeout 45 FcgidIOTimeout 60 FcgidConnectTimeout 20 FcgidMaxProcesses 100 FcgidMaxRequestsPerProcess 500 FcgidOutputBufferSize 1048576 System info: Linux xxx.com 2.6.28-11-server #42-Ubuntu SMP Fri Apr 17 02:45:36 UTC 2009 x86_64 GNU/Linux DISTRIB_ID=Ubuntu DISTRIB_RELEASE=9.04 DISTRIB_CODENAME=jaunty DISTRIB_DESCRIPTION="Ubuntu 9.04" Apache info: Server version: Apache/2.2.11 (Ubuntu) Server built: Aug 16 2010 17:45:55 Server's Module Magic Number: 20051115:21 Server loaded: APR 1.2.12, APR-Util 1.2.12 Compiled using: APR 1.2.12, APR-Util 1.2.12 Architecture: 64-bit Server MPM: Worker threaded: yes (fixed thread count) forked: yes (variable process count) Server compiled with.... -D APACHE_MPM_DIR="server/mpm/worker" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=128 -D HTTPD_ROOT="" -D SUEXEC_BIN="/usr/lib/apache2/suexec" -D DEFAULT_PIDLOG="/var/run/apache2.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="/etc/apache2/mime.types" -D SERVER_CONFIG_FILE="/etc/apache2/apache2.conf" Apache modules loaded: alias.load auth_basic.load authn_file.load authz_default.load authz_groupfile.load authz_host.load authz_user.load autoindex.load cgi.load deflate.load dir.load env.load expires.load fcgid.load headers.load include.load mime.load negotiation.load rewrite.load setenvif.load ssl.load status.load suexec.load PHP info: PHP 5.2.6-3ubuntu4.6 with Suhosin-Patch 0.9.6.2 (cli) (built: Sep 16 2010 19:51:25) Copyright (c) 1997-2008 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2008 Zend Technologies

    Read the article

  • Finding out why Dell Controler is Degraded

    - by Kyle Brandt
    I installed open manage on a couple of my PE 2950s for snmp monitoring of the RAID. All the checks seem to come back okay except for controllerState: [root@aMachine ~]# snmpwalk -v 2c -c bestNotToPostPasswords myMachine -m +StorageManagement-MIB controllerstate StorageManagement-MIB::controllerState.1 = INTEGER: degraded(6) Other checks seems to indicate the battery, LD, and physicals disks are all good unless I missing something. Can anyone tell if I am missing something or neglecting something import in my RAID monitoring/understanding? I get degraded for both these servers I have set up. A walk of the entire storage management tree for on of them: StorageManagement-MIB::softwareVersion.0 = STRING: "3.2.0" StorageManagement-MIB::globalStatus.0 = INTEGER: warning(2) StorageManagement-MIB::softwareManufacturer.0 = STRING: "Dell Inc." StorageManagement-MIB::softwareProduct.0 = STRING: "Server Administrator (Storage Management)" StorageManagement-MIB::softwareDescription.0 = STRING: "Configuration and monitoring of disk storage devices." StorageManagement-MIB::displayName.0 = STRING: "Server Administrator (Storage Management)" StorageManagement-MIB::description.0 = STRING: "Configuration and monitoring of disk storage devices." StorageManagement-MIB::agentVendor.0 = STRING: "Dell Inc." StorageManagement-MIB::agentTimeStamp.0 = INTEGER: 1273842310 StorageManagement-MIB::agentGetTimeout.0 = INTEGER: 5 StorageManagement-MIB::agentModifiers.0 = INTEGER: 0 StorageManagement-MIB::agentRefreshRate.0 = INTEGER: 300 StorageManagement-MIB::agentMibVersion.0 = STRING: "3.2" StorageManagement-MIB::agentManagementSoftwareURLName.0 = "" StorageManagement-MIB::agentGlobalSystemStatus.0 = INTEGER: nonCritical(4) StorageManagement-MIB::agentLastGlobalSystemStatus.0 = INTEGER: ok(3) StorageManagement-MIB::agentSmartThermalShutdown.0 = INTEGER: notApplicable(3) StorageManagement-MIB::controllerNumber.1 = INTEGER: 1 StorageManagement-MIB::controllerName.1 = STRING: "PERC 5/i Integrated" StorageManagement-MIB::controllerVendor.1 = STRING: "DELL" StorageManagement-MIB::controllerType.1 = INTEGER: sas(6) StorageManagement-MIB::controllerState.1 = INTEGER: degraded(6) StorageManagement-MIB::controllerRebuildRateInPercent.1 = INTEGER: 30 StorageManagement-MIB::controllerFWVersion.1 = STRING: "5.0.2-0003" StorageManagement-MIB::controllerCacheSizeInMB.1 = INTEGER: 256 StorageManagement-MIB::controllerCacheSizeInBytes.1 = INTEGER: 0 StorageManagement-MIB::controllerPhysicalDeviceCount.1 = INTEGER: 5 StorageManagement-MIB::controllerLogicalDeviceCount.1 = INTEGER: 1 StorageManagement-MIB::controllerRollUpStatus.1 = INTEGER: nonCritical(4) StorageManagement-MIB::controllerComponentStatus.1 = INTEGER: nonCritical(4) StorageManagement-MIB::controllerNexusID.1 = STRING: "\\0" StorageManagement-MIB::controllerAlarmState.1 = INTEGER: disabled(2) StorageManagement-MIB::controllerDriverVersion.1 = STRING: "00.00.03.05 " StorageManagement-MIB::controllerPCISlot.1 = STRING: "embedded" StorageManagement-MIB::controllerClusterMode.1 = INTEGER: notApplicable(99) StorageManagement-MIB::controllerMinFWVersion.1 = STRING: "5.2.1-0067" StorageManagement-MIB::controllerMinDriverVersion.1 = STRING: "00.00.03.21" StorageManagement-MIB::controllerChannelCount.1 = INTEGER: 2 StorageManagement-MIB::controllerReconstructRate.1 = INTEGER: 30 StorageManagement-MIB::controllerPatrolReadRate.1 = INTEGER: 30 StorageManagement-MIB::controllerBGIRate.1 = INTEGER: 30 StorageManagement-MIB::controllerCheckConsistencyRate.1 = INTEGER: 30 StorageManagement-MIB::controllerPatrolReadMode.1 = INTEGER: automatic(1) StorageManagement-MIB::controllerPatrolReadState.1 = INTEGER: stopped(1) StorageManagement-MIB::controllerPatrolReadIterations.1 = INTEGER: 162 StorageManagement-MIB::controllerEntry.57.1 = INTEGER: 99 StorageManagement-MIB::controllerEntry.58.1 = INTEGER: 99 StorageManagement-MIB::channelNumber.1 = INTEGER: 1 StorageManagement-MIB::channelNumber.2 = INTEGER: 2 StorageManagement-MIB::channelName.1 = STRING: "Connector 0" StorageManagement-MIB::channelName.2 = STRING: "Connector 1" StorageManagement-MIB::channelState.1 = INTEGER: ready(1) StorageManagement-MIB::channelState.2 = INTEGER: ready(1) StorageManagement-MIB::channelRollUpStatus.1 = INTEGER: ok(3) StorageManagement-MIB::channelRollUpStatus.2 = INTEGER: ok(3) StorageManagement-MIB::channelComponentStatus.1 = INTEGER: ok(3) StorageManagement-MIB::channelComponentStatus.2 = INTEGER: ok(3) StorageManagement-MIB::channelNexusID.1 = STRING: "\\0\\0" StorageManagement-MIB::channelNexusID.2 = STRING: "\\0\\1" StorageManagement-MIB::channelBusType.1 = INTEGER: sas(8) StorageManagement-MIB::channelBusType.2 = INTEGER: sas(8) StorageManagement-MIB::enclosureNumber.1 = INTEGER: 1 StorageManagement-MIB::enclosureName.1 = STRING: "Backplane" StorageManagement-MIB::enclosureVendor.1 = STRING: "DELL" StorageManagement-MIB::enclosureState.1 = INTEGER: ready(1) StorageManagement-MIB::enclosureProductID.1 = STRING: "BACKPLANE " StorageManagement-MIB::enclosureType.1 = INTEGER: internal(1) StorageManagement-MIB::enclosureChannelNumber.1 = INTEGER: 0 StorageManagement-MIB::enclosureRollUpStatus.1 = INTEGER: ok(3) StorageManagement-MIB::enclosureComponentStatus.1 = INTEGER: ok(3) StorageManagement-MIB::enclosureNexusID.1 = STRING: "\\0\\0\\0" StorageManagement-MIB::enclosureFirmwareVersion.1 = STRING: "1.00" StorageManagement-MIB::enclosureSASAddress.1 = STRING: "50019090B4C67200" StorageManagement-MIB::arrayDiskNumber.1 = INTEGER: 1 StorageManagement-MIB::arrayDiskNumber.2 = INTEGER: 2 StorageManagement-MIB::arrayDiskNumber.3 = INTEGER: 3 StorageManagement-MIB::arrayDiskNumber.4 = INTEGER: 4 StorageManagement-MIB::arrayDiskName.1 = STRING: "Physical Disk 0:0:0" StorageManagement-MIB::arrayDiskName.2 = STRING: "Physical Disk 0:0:1" StorageManagement-MIB::arrayDiskName.3 = STRING: "Physical Disk 0:0:2" StorageManagement-MIB::arrayDiskName.4 = STRING: "Physical Disk 0:0:3" StorageManagement-MIB::arrayDiskVendor.1 = STRING: "DELL " StorageManagement-MIB::arrayDiskVendor.2 = STRING: "DELL " StorageManagement-MIB::arrayDiskVendor.3 = STRING: "DELL " StorageManagement-MIB::arrayDiskVendor.4 = STRING: "DELL " StorageManagement-MIB::arrayDiskState.1 = INTEGER: online(3) StorageManagement-MIB::arrayDiskState.2 = INTEGER: online(3) StorageManagement-MIB::arrayDiskState.3 = INTEGER: online(3) StorageManagement-MIB::arrayDiskState.4 = INTEGER: online(3) StorageManagement-MIB::arrayDiskProductID.1 = STRING: "ST3146755SS " StorageManagement-MIB::arrayDiskProductID.2 = STRING: "ST3146755SS " StorageManagement-MIB::arrayDiskProductID.3 = STRING: "ST3146755SS " StorageManagement-MIB::arrayDiskProductID.4 = STRING: "ST3146755SS " StorageManagement-MIB::arrayDiskSerialNo.1 = STRING: "3LN0LRL0 " StorageManagement-MIB::arrayDiskSerialNo.2 = STRING: "3LN0JYJS " StorageManagement-MIB::arrayDiskSerialNo.3 = STRING: "3LN0LR0V " StorageManagement-MIB::arrayDiskSerialNo.4 = STRING: "3LN0JH97 " StorageManagement-MIB::arrayDiskRevision.1 = STRING: "T106" StorageManagement-MIB::arrayDiskRevision.2 = STRING: "T106" StorageManagement-MIB::arrayDiskRevision.3 = STRING: "T106" StorageManagement-MIB::arrayDiskRevision.4 = STRING: "T106" StorageManagement-MIB::arrayDiskEnclosureID.1 = STRING: "0" StorageManagement-MIB::arrayDiskEnclosureID.2 = STRING: "0" StorageManagement-MIB::arrayDiskEnclosureID.3 = STRING: "0" StorageManagement-MIB::arrayDiskEnclosureID.4 = STRING: "0" StorageManagement-MIB::arrayDiskChannel.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskChannel.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskChannel.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskChannel.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskLengthInMB.1 = INTEGER: 139392 StorageManagement-MIB::arrayDiskLengthInMB.2 = INTEGER: 139392 StorageManagement-MIB::arrayDiskLengthInMB.3 = INTEGER: 139392 StorageManagement-MIB::arrayDiskLengthInMB.4 = INTEGER: 139392 StorageManagement-MIB::arrayDiskLengthInBytes.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskLengthInBytes.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskLengthInBytes.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskLengthInBytes.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskLargestContiguousFreeSpaceInMB.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskLargestContiguousFreeSpaceInMB.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskLargestContiguousFreeSpaceInMB.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskLargestContiguousFreeSpaceInMB.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskLargestContiguousFreeSpaceInBytes.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskLargestContiguousFreeSpaceInBytes.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskLargestContiguousFreeSpaceInBytes.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskLargestContiguousFreeSpaceInBytes.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskTargetID.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskTargetID.2 = INTEGER: 1 StorageManagement-MIB::arrayDiskTargetID.3 = INTEGER: 2 StorageManagement-MIB::arrayDiskTargetID.4 = INTEGER: 3 StorageManagement-MIB::arrayDiskLunID.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskLunID.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskLunID.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskLunID.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskUsedSpaceInMB.1 = INTEGER: 139392 StorageManagement-MIB::arrayDiskUsedSpaceInMB.2 = INTEGER: 139392 StorageManagement-MIB::arrayDiskUsedSpaceInMB.3 = INTEGER: 139392 StorageManagement-MIB::arrayDiskUsedSpaceInMB.4 = INTEGER: 139392 StorageManagement-MIB::arrayDiskUsedSpaceInBytes.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskUsedSpaceInBytes.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskUsedSpaceInBytes.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskUsedSpaceInBytes.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskFreeSpaceInMB.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskFreeSpaceInMB.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskFreeSpaceInMB.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskFreeSpaceInMB.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskFreeSpaceInBytes.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskFreeSpaceInBytes.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskFreeSpaceInBytes.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskFreeSpaceInBytes.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskBusType.1 = INTEGER: sas(8) StorageManagement-MIB::arrayDiskBusType.2 = INTEGER: sas(8) StorageManagement-MIB::arrayDiskBusType.3 = INTEGER: sas(8) StorageManagement-MIB::arrayDiskBusType.4 = INTEGER: sas(8) StorageManagement-MIB::arrayDiskSpareState.1 = INTEGER: notASpare(5) StorageManagement-MIB::arrayDiskSpareState.2 = INTEGER: notASpare(5) StorageManagement-MIB::arrayDiskSpareState.3 = INTEGER: notASpare(5) StorageManagement-MIB::arrayDiskSpareState.4 = INTEGER: notASpare(5) StorageManagement-MIB::arrayDiskRollUpStatus.1 = INTEGER: ok(3) StorageManagement-MIB::arrayDiskRollUpStatus.2 = INTEGER: ok(3) StorageManagement-MIB::arrayDiskRollUpStatus.3 = INTEGER: ok(3) StorageManagement-MIB::arrayDiskRollUpStatus.4 = INTEGER: ok(3) StorageManagement-MIB::arrayDiskComponentStatus.1 = INTEGER: ok(3) StorageManagement-MIB::arrayDiskComponentStatus.2 = INTEGER: ok(3) StorageManagement-MIB::arrayDiskComponentStatus.3 = INTEGER: ok(3) StorageManagement-MIB::arrayDiskComponentStatus.4 = INTEGER: ok(3) StorageManagement-MIB::arrayDiskNexusID.1 = STRING: "\\0\\0\\0\\0" StorageManagement-MIB::arrayDiskNexusID.2 = STRING: "\\0\\0\\0\\1" StorageManagement-MIB::arrayDiskNexusID.3 = STRING: "\\0\\0\\0\\2" StorageManagement-MIB::arrayDiskNexusID.4 = STRING: "\\0\\0\\0\\3" StorageManagement-MIB::arrayDiskPartNumber.1 = STRING: "SG0DR2381253172FLRL0A00 " StorageManagement-MIB::arrayDiskPartNumber.2 = STRING: "SG0DR2381253172FJYJSA00 " StorageManagement-MIB::arrayDiskPartNumber.3 = STRING: "SG0DR2381253172FLR0VA00 " StorageManagement-MIB::arrayDiskPartNumber.4 = STRING: "SG0DR2381253172FJH97A00 " StorageManagement-MIB::arrayDiskSASAddress.1 = STRING: "5000C50002380201" StorageManagement-MIB::arrayDiskSASAddress.2 = STRING: "5000C50002385B89" StorageManagement-MIB::arrayDiskSASAddress.3 = STRING: "5000C50002385AA9" StorageManagement-MIB::arrayDiskSASAddress.4 = STRING: "5000C500023841E1" StorageManagement-MIB::arrayDiskSmartAlertIndication.1 = INTEGER: no(1) StorageManagement-MIB::arrayDiskSmartAlertIndication.2 = INTEGER: no(1) StorageManagement-MIB::arrayDiskSmartAlertIndication.3 = INTEGER: no(1) StorageManagement-MIB::arrayDiskSmartAlertIndication.4 = INTEGER: no(1) StorageManagement-MIB::arrayDiskManufactureDay.1 = STRING: "07" StorageManagement-MIB::arrayDiskManufactureDay.2 = STRING: "07" StorageManagement-MIB::arrayDiskManufactureDay.3 = STRING: "07" StorageManagement-MIB::arrayDiskManufactureDay.4 = STRING: "07" StorageManagement-MIB::arrayDiskManufactureWeek.1 = STRING: "07" StorageManagement-MIB::arrayDiskManufactureWeek.2 = STRING: "07" StorageManagement-MIB::arrayDiskManufactureWeek.3 = STRING: "07" StorageManagement-MIB::arrayDiskManufactureWeek.4 = STRING: "07" StorageManagement-MIB::arrayDiskManufactureYear.1 = STRING: "2005" StorageManagement-MIB::arrayDiskManufactureYear.2 = STRING: "2005" StorageManagement-MIB::arrayDiskManufactureYear.3 = STRING: "2005" StorageManagement-MIB::arrayDiskManufactureYear.4 = STRING: "2005" StorageManagement-MIB::arrayDiskMediaType.1 = INTEGER: hdd(2) StorageManagement-MIB::arrayDiskMediaType.2 = INTEGER: hdd(2) StorageManagement-MIB::arrayDiskMediaType.3 = INTEGER: hdd(2) StorageManagement-MIB::arrayDiskMediaType.4 = INTEGER: hdd(2) StorageManagement-MIB::arrayDiskEntry.36.1 = INTEGER: 1 StorageManagement-MIB::arrayDiskEntry.36.2 = INTEGER: 1 StorageManagement-MIB::arrayDiskEntry.36.3 = INTEGER: 1 StorageManagement-MIB::arrayDiskEntry.36.4 = INTEGER: 1 StorageManagement-MIB::arrayDiskEntry.40.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskEntry.40.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskEntry.40.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskEntry.40.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskEntry.41.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskEntry.41.2 = INTEGER: 0 StorageManagement-MIB::arrayDiskEntry.41.3 = INTEGER: 0 StorageManagement-MIB::arrayDiskEntry.41.4 = INTEGER: 0 StorageManagement-MIB::arrayDiskEnclosureConnectionNumber.1 = INTEGER: 1 StorageManagement-MIB::arrayDiskEnclosureConnectionNumber.2 = INTEGER: 2 StorageManagement-MIB::arrayDiskEnclosureConnectionNumber.3 = INTEGER: 3 StorageManagement-MIB::arrayDiskEnclosureConnectionNumber.4 = INTEGER: 4 StorageManagement-MIB::arrayDiskEnclosureConnectionArrayDiskName.1 = STRING: "Physical Disk 0:0:0" StorageManagement-MIB::arrayDiskEnclosureConnectionArrayDiskName.2 = STRING: "Physical Disk 0:0:1" StorageManagement-MIB::arrayDiskEnclosureConnectionArrayDiskName.3 = STRING: "Physical Disk 0:0:2" StorageManagement-MIB::arrayDiskEnclosureConnectionArrayDiskName.4 = STRING: "Physical Disk 0:0:3" StorageManagement-MIB::arrayDiskEnclosureConnectionArrayDiskNumber.1 = INTEGER: 1 StorageManagement-MIB::arrayDiskEnclosureConnectionArrayDiskNumber.2 = INTEGER: 2 StorageManagement-MIB::arrayDiskEnclosureConnectionArrayDiskNumber.3 = INTEGER: 3 StorageManagement-MIB::arrayDiskEnclosureConnectionArrayDiskNumber.4 = INTEGER: 4 StorageManagement-MIB::arrayDiskEnclosureConnectionEnclosureName.1 = STRING: "Backplane" StorageManagement-MIB::arrayDiskEnclosureConnectionEnclosureName.2 = STRING: "Backplane" StorageManagement-MIB::arrayDiskEnclosureConnectionEnclosureName.3 = STRING: "Backplane" StorageManagement-MIB::arrayDiskEnclosureConnectionEnclosureName.4 = STRING: "Backplane" StorageManagement-MIB::arrayDiskEnclosureConnectionEnclosureNumber.1 = INTEGER: 1 StorageManagement-MIB::arrayDiskEnclosureConnectionEnclosureNumber.2 = INTEGER: 1 StorageManagement-MIB::arrayDiskEnclosureConnectionEnclosureNumber.3 = INTEGER: 1 StorageManagement-MIB::arrayDiskEnclosureConnectionEnclosureNumber.4 = INTEGER: 1 StorageManagement-MIB::arrayDiskEnclosureConnectionControllerName.1 = STRING: "PERC 5/i Integrated" StorageManagement-MIB::arrayDiskEnclosureConnectionControllerName.2 = STRING: "PERC 5/i Integrated" StorageManagement-MIB::arrayDiskEnclosureConnectionControllerName.3 = STRING: "PERC 5/i Integrated" StorageManagement-MIB::arrayDiskEnclosureConnectionControllerName.4 = STRING: "PERC 5/i Integrated" StorageManagement-MIB::arrayDiskEnclosureConnectionControllerNumber.1 = INTEGER: 1 StorageManagement-MIB::arrayDiskEnclosureConnectionControllerNumber.2 = INTEGER: 1 StorageManagement-MIB::arrayDiskEnclosureConnectionControllerNumber.3 = INTEGER: 1 StorageManagement-MIB::arrayDiskEnclosureConnectionControllerNumber.4 = INTEGER: 1 StorageManagement-MIB::batteryNumber.1 = INTEGER: 1 StorageManagement-MIB::batteryName.1 = STRING: "Battery 0" StorageManagement-MIB::batteryVendor.1 = STRING: "DELL" StorageManagement-MIB::batteryState.1 = INTEGER: ready(1) StorageManagement-MIB::batteryRollUpStatus.1 = INTEGER: ok(3) StorageManagement-MIB::batteryComponentStatus.1 = INTEGER: ok(3) StorageManagement-MIB::batteryNexusID.1 = STRING: "\\0\\0" StorageManagement-MIB::batteryPredictedCapacity.1 = INTEGER: ready(2) StorageManagement-MIB::batteryNextLearnTime.1 = INTEGER: 21 StorageManagement-MIB::batteryLearnState.1 = INTEGER: idle(16) StorageManagement-MIB::batteryEntry.13.1 = INTEGER: 0 StorageManagement-MIB::batteryMaxLearnDelay.1 = INTEGER: 168 StorageManagement-MIB::batteryConnectionNumber.1 = INTEGER: 1 StorageManagement-MIB::batteryConnectionBatteryName.1 = STRING: "Battery 0" StorageManagement-MIB::batteryConnectionBatteryNumber.1 = INTEGER: 1 StorageManagement-MIB::batteryConnectionControllerName.1 = STRING: "PERC 5/i Integrated" StorageManagement-MIB::batteryConnectionControllerNumber.1 = INTEGER: 1 StorageManagement-MIB::virtualDiskNumber.1 = INTEGER: 1 StorageManagement-MIB::virtualDiskName.1 = STRING: "Virtual Disk 0" StorageManagement-MIB::virtualDiskDeviceName.1 = STRING: "/dev/sda" StorageManagement-MIB::virtualDiskState.1 = INTEGER: ready(1) StorageManagement-MIB::virtualDiskLengthInMB.1 = INTEGER: 278784 StorageManagement-MIB::virtualDiskLengthInBytes.1 = INTEGER: 0 StorageManagement-MIB::virtualDiskWritePolicy.1 = INTEGER: writeBack(3) StorageManagement-MIB::virtualDiskReadPolicy.1 = INTEGER: noReadAhead(5) StorageManagement-MIB::virtualDiskCachePolicy.1 = INTEGER: not-applicable(99) StorageManagement-MIB::virtualDiskLayout.1 = INTEGER: raid-10(10) StorageManagement-MIB::virtualDiskCurStripeSizeInMB.1 = INTEGER: 0 StorageManagement-MIB::virtualDiskCurStripeSizeInBytes.1 = INTEGER: 65536 StorageManagement-MIB::virtualDiskTargetID.1 = INTEGER: 0 StorageManagement-MIB::virtualDiskRollUpStatus.1 = INTEGER: ok(3) StorageManagement-MIB::virtualDiskComponentStatus.1 = INTEGER: ok(3) StorageManagement-MIB::virtualDiskNexusID.1 = STRING: "\\0\\0" StorageManagement-MIB::virtualDiskArrayDiskType.1 = INTEGER: sas(1) StorageManagement-MIB::virtualDiskEntry.23.1 = INTEGER: 2 StorageManagement-MIB::virtualDiskEntry.24.1 = INTEGER: 0 StorageManagement-MIB::arrayDiskLogicalConnectionNumber.1 = INTEGER: 1 StorageManagement-MIB::arrayDiskLogicalConnectionNumber.2 = INTEGER: 2 StorageManagement-MIB::arrayDiskLogicalConnectionNumber.3 = INTEGER: 3 StorageManagement-MIB::arrayDiskLogicalConnectionNumber.4 = INTEGER: 4 StorageManagement-MIB::arrayDiskLogicalConnectionArrayDiskName.1 = STRING: "Physical Disk 0:0:0" StorageManagement-MIB::arrayDiskLogicalConnectionArrayDiskName.2 = STRING: "Physical Disk 0:0:1" StorageManagement-MIB::arrayDiskLogicalConnectionArrayDiskName.3 = STRING: "Physical Disk 0:0:2" StorageManagement-MIB::arrayDiskLogicalConnectionArrayDiskName.4 = STRING: "Physical Disk 0:0:3" StorageManagement-MIB::arrayDiskLogicalConnectionArrayDiskNumber.1 = INTEGER: 1 StorageManagement-MIB::arrayDiskLogicalConnectionArrayDiskNumber.2 = INTEGER: 2 StorageManagement-MIB::arrayDiskLogicalConnectionArrayDiskNumber.3 = INTEGER: 3 StorageManagement-MIB::arrayDiskLogicalConnectionArrayDiskNumber.4 = INTEGER: 4 StorageManagement-MIB::arrayDiskLogicalConnectionVirtualDiskName.1 = STRING: "Virtual Disk 0" StorageManagement-MIB::arrayDiskLogicalConnectionVirtualDiskName.2 = STRING: "Virtual Disk 0" StorageManagement-MIB::arrayDiskLogicalConnectionVirtualDiskName.3 = STRING: "Virtual Disk 0" StorageManagement-MIB::arrayDiskLogicalConnectionVirtualDiskName.4 = STRING: "Virtual Disk 0" StorageManagement-MIB::arrayDiskLogicalConnectionVirtualDiskNumber.1 = INTEGER: 1 StorageManagement-MIB::arrayDiskLogicalConnectionVirtualDiskNumber.2 = INTEGER: 1 StorageManagement-MIB::arrayDiskLogicalConnectionVirtualDiskNumber.3 = INTEGER: 1 StorageManagement-MIB::arrayDiskLogicalConnectionVirtualDiskNumber.4 = INTEGER: 1

    Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >