Search Results

Search found 16427 results on 658 pages for 'brendan long'.

Page 88/658 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

• client problems - misaligned expectations & not following SDLC protocols

  - by louism

  hi guys, im having some serious problems with a client on a project - i could use some advice please the short version i have been working with this client now for almost 6 months without any problems (a classified website project in the range of 500 hours) over the last few days things have drastically deteriorated to the point where ive had to place the project on-hold whilst i work-out what to do (this has pissed the client off even more) to be simplistic, the root cause of the issue is this: the client doesnt read the specs i make for him, i code the feature, he than wants to change things, i tell him its not to the agreed spec and that that change will have to be postponed and possibly charged for, he gets upset and rants saying 'hes paid for the feature' and im not keeping to the agreement (<- misalignment of expectations) i think the root cause of the root cause is my clients failure to take my SDLC protocols seriously. i have a bug tracking system in place which he practically refuses to use (he still emails me bugs), he doesnt seem to care to much for the protocols i use for dealing with scope creep and change control the whole situation came to a head recently where he 'cracked it' (an aussie term for being fed-up). the more terms like 'postponed for post-launch implementation', 'costed feature addition', and 'not to agreed spec' i kept using, the worse it got finally, he began to bully me - basically insisting i shut-up and do the work im being paid for. i wrote a long-winded email explaining how wrong he was on all these different points, and explaining what all the SDLC protocols do to protect the success of the project. than i deleted that email and wrote a new one in the new email, i suggested as a solution i write up a list of grievances we both had. we than review the list and compromise on different points: he gets some things he wants, i get some things i want. sometimes youve got to give ground to get ground his response to this suggestion was flat-out refusal, and a restatement that i should just get on with the work ive been paid to do so there you have the very subjective short version. if you have the time and inclination, the long version may be a little less bias as it has the email communiques between me and my client the long version (with background) the long version works by me showing you the email communiques which lead to the situation coming to a head. so here it is, judge for yourself where the trouble started... 1. client asked me why something was missing from a feature i just uploaded, my response was to show him what was in the spec: it basically said the item he was looking for was never going to be included 2. [clients response...] Memo Louis, We are following your own title fields and keeping a consistent layout. Why the big fuss about not adding "Part". It simply replaces "model" and is consistent with your current title fields. 3. [my response...] hi [client], the 'part' field appeared to me as a redundancy / mistake. i requested clarification but never received any in a timely manner (about 2 weeks ago) the specification for this feature also indicated it wasnt going to be included: RE: "Why the big fuss about not adding "Part" " it may not appear so, but it would actually be a lot of work for me to now add a 'Part' field it could take me up to 15-20 minutes to properly explain why its such a big undertaking to do this, but i would prefer to use that time instead to work on completing your v1.1 features as a simplistic explanation - it connects to the change in paradigm from a 'generic classified ad' model to a 'specific attributes for specific categories' model basically, i am saying it is a big fuss, but i understand that it doesnt look that way - after all, it is just one ity-bitty field :) if you require a fuller explanation, please let me know and i will commit the time needed to write that out also, if you recall when we first started on the project, i said that with the effort/time required for features, you would likely not know off the top of your head. you may think something is really complex, but in reality its quite simple, you might think something is easy - but it could actually be a massive trauma to code (which is the case here with the 'Part' field). if you also recalled, i said the best course of action is to just ask, and i would let you know on a case-by-case basis 4. [email from me to client...] hi [client], the online catalogue page is now up live (see my email from a few days ago for information on how it works) note: the window of opportunity for input/revisions on what data the catalogue stores has now closed (as i have put the code up live now) RE: the UI/layout of the online catalogue page you may still do visual/ui tweaks to the page at the moment (this window for input/revisions will close in a couple of days time) 5. [email from client to me...] *(note: i had put up the feature & asked the client to review it, never heard back from them for a few days)* Memo Louis, Here you go again. CLOSED without a word of input from the customer. I don't think so. I will reply tomorrow regarding the content and functionality we require from this feature. 5. [from me to client...] hi [client]: RE: from my understanding, you are saying that the mini-sale yard control would change itself based on the fact someone was viewing for parts & accessories <- is that correct? this change is outside the scope of the v1.1 mini-spec and therefore will need to wait 'til post launch for costing/implementation 6. [email from client to me...] Memo Louis, Following your v1.1 mini-spec and all your time paid in full for the work selected. We need to make the situation clear. There will be no further items held for post-launch. Do not expect us to pay for any further items other than those we have agreed upon. You have undertaken to complete the Parts and accessories feature as follows. Obviously, as part of this process the "mini search" will be effected, and will require "adaption to make sense". 7. [email from me to client...] hi [client], RE: "There will be no further items held for post-launch. Do not expect us to pay for any further items other than those we have agreed upon." a few points to consider: 1) the specification for the 'parts & accessories' feature was as follows: (i.e. [what] "...we have agreed upon.") 2) you have received the 'parts & accessories' feature free of charge (you have paid $0 for it). ive spent two days coding that feature as a gesture of good will i would request that you please consider these two facts carefully and sincerely 8. [email from client to me...] Memo Louis, I don't see how you are giving us anything for free. From your original fee proposal you have deleted more than 30 hours of included features. Your title "shelved features". Further you have charged us twice by adding back into the site, at an addition cost, some of those "shelved features" features. See v1.1 mini-spec. Did include in your original fee proposal a change request budget but then charge without discussion items included in v1.1 mini-spec. Included a further Features test plan for a regression test, a fee of 10 hours that would not have been required if the "shelved features" were not left out of the agreed fee proposal. I have made every attempt to satisfy your your uneven business sense by offering you everything your heart desired, in the v1.1 mini-spec, to be left once again with your attitude of "its too hard, lets leave it for post launch". I am no longer accepting anything less than what we have contracted you to do. That is clearly defined in v1.1 mini-spec, and you are paid in advance for delivering those items as an acceptable function. a few notes about the above email... i had to cull features from the original spec because it didnt fit into the budget. i explained this to the client at the start of the project (he wanted more features than he had budget hours to do them all) nothing has been charged for twice, i didnt charge the client for culled features. im charging him to now do those culled features the draft version of the project schedule included a change request budget of 10 hours, but i had to remove that to meet the budget (the client may not have been aware of this to be fair to them) what the client refers to as my attitude of 'too hard/leave it for post-launch', i called a change request protocol and a method for keeping scope creep under control 9. [email from me to client...] hi [client], RE: "...all your grievances..." i had originally written out a long email response; it was fantastic, it had all these great points of how 'you were wrong' and 'i was right', you would of loved it (and by 'loved it', i mean it would of just infuriated you more) so, i decided to deleted it start over, for two reasons: 1) a long email is being disrespectful of your time (youre a busy businessman with things to do) 2) whos wrong or right gets us no closer to fixing the problems we are experiencing what i propose is this... i prepare a bullet point list of your grievances and my grievances (yes, im unhappy too about how things are going - and it has little to do with money) i submit this list to you for you to add to as necessary we then both take a good hard look at this list, and we decide which areas we are willing to give ground on as an example, the list may look something like this: "louis, you keep taking away features you said you would do" [your grievance 2] [your grievance 3] [your grievance ...] "[client], i feel you dont properly read the specs i prepare for you..." [my grievance 2] [my grievance 3] [my grievance ...] if you are willing to give this a try, let me know will it work? who knows. but if it doesnt, we can always go back to arguing some more :) obviously, this will only work if you are willing to give it a genuine try, and you can accept that you may have to 'give some ground to get some ground' what do you think? 10. [email from client to me ...] Memo Louis, Instead of wasting your time listing grievances, I would prefer you complete the items in v1.1 mini-spec, to a satisfactory conclusion. We almost had the website ready for launch until you brought the v1.1 mini-spec into the frame. Obviously I expected you could complete the v1.1 mini-spec in a two-week time frame as you indicated and give the site a more profession presentation. Most of the problems have been caused by you not following our instructions, but deciding to do what you feel like at the time. And then arguing with us how the missing information is not necessary. For instance "Parts and Accessories". Why on earth would you leave out the parts heading, when it ties-in with the fields you have already developed. It replaces "model" and is just as important in the context of information that appears in the "Details" panel. We are at a stage where the the v1.1 mini-spec needs to be completed without further time wasting and the site is complete (subject to all features working). We are on standby at this end to do just that. Let me know when you are back, working on the site and we will process and complete each v1.1 mini-spec, item by item, until the job is complete. 11. [last email from me to client...] hi [client], based on this reply, and your demonstrated unwillingness to compromise/give any ground on issues at hand, i have decided to place your project on-hold for the moment i will be considering further options on how to over-come our challenges over the next few days i will contact you by monday 17/may to discuss any new options i have come up with, and if i believe it is appropriate to restart work on your project at that point or not told you it was long... what do you think?

  Read the article

• Microsoft and the open source community

  - by Charles Young

  For the last decade, I have repeatedly, in my imitable Microsoft fan boy style, offered an alternative view to commonly held beliefs about Microsoft's stance on open source licensing.  In earlier times, leading figures in Microsoft were very vocal in resisting the idea that commercial licensing is outmoded or morally reprehensible.  Many people interpreted this as all-out corporate opposition to open source licensing.  I never read it that way. It is true that I've met individual employees of Microsoft who are antagonistic towards FOSS (free and open source software), but I've met more who are supportive or at least neutral on the subject.  In any case, individual attitudes of employees don't necessarily reflect a corporate stance.  The strongest opposition I've encountered has actually come from outside the company.  It's not a charitable thought, but I sometimes wonder if there are people in the .NET community who are opposed to FOSS simply because they believe, erroneously, that Microsoft is opposed. Here, for what it is worth, are the points I've repeated endlessly over the years and which have often been received with quizzical scepticism. a)  A decade ago, Microsoft's big problem was not FOSS per se, or even with copyleft.  The thing which really kept them awake at night was the fear that one day, someone might find, deep in the heart of the Windows code base, some code that should not be there and which was published under GPL.  The likelihood of this ever happening has long since faded away, but there was a time when MS was running scared.  I suspect this is why they held out for a while from making Windows source code open to inspection.  Nowadays, as an MVP, I am positively encouraged to ask to see Windows source. b)  Microsoft has never opposed the open source community.  They have had problems with specific people and organisations in the FOSS community.  Back in the 1990s, Richard Stallman gave time and energy to a successful campaign to launch antitrust proceedings against Microsoft.  In more recent times, the negative attitude of certain people to Microsoft's submission of two FOSS licences to the OSI (both of which have long since been accepted), and the mad scramble to try to find any argument, however tenuous, to block their submission was not, let us say, edifying. c) Microsoft has never, to my knowledge, written off the FOSS model.  They certainly don't agree that more traditional forms of licensing are inappropriate or immoral, and they've always been prepared to say so.  One reason why it was so hard to convince people that Microsoft is not rabidly antagonistic towards FOSS licensing is that so many people think they have no involvement in open source.  A decade ago, there was virtually no evidence of any such involvement.  However, that was a long time ago.  Quietly over the years, Microsoft has got on with the job of working out how to make use of FOSS licensing and how to support the FOSS community.  For example, as well as making increasingly extensive use of Github, they run an important FOSS forge (CodePlex) on which they, themselves, host many hundreds of distinct projects.  The total count may even be in the thousands now.  I suspect there is a limit of about 500 records on CodePlex searches because, for the past few years, whenever I search for Microsoft-specific projects on CodePlex, I always get approx. 500 hits.  Admittedly, a large volume of the stuff they publish under FOSS licences amounts to code samples, but many of those 'samples' have grown into useful and fully featured frameworks, libraries and tools. All this is leading up to the observation that yesterday's announcement by Scott Guthrie marks a significant milestone and should not go unnoticed.  If you missed it, let me summarise.   From the first release of .NET, Microsoft has offered a web development framework called ASP.NET.  The core libraries are included in the .NET framework which is released free of charge, but which is not open source.   However, in recent years, the number of libraries that constitute ASP.NET have grown considerably.  Today, most professional ASP.NET web development exploits the ASP.NET MVC framework.  This, together with several other important parts of the ASP.NET technology stack, is released on CodePlex under the Apache 2.0 licence.   Hence, today, a huge swathe of web development on the .NET/Azure platform relies four-square on the use of FOSS frameworks and libraries. Yesterday, Scott Guthrie announced the next stage of ASP.NET's journey towards FOSS nirvana.  This involves extending ASP.NET's FOSS stack to include Web API and the MVC Razor view engine which is rapidly becoming the de facto 'standard' for building web pages in ASP.NET.  However, perhaps the more important announcement is that the ASP.NET team will now accept and review contributions from the community.  Scott points out that this model is already in place elsewhere in Microsoft, and specifically draws attention to development of the Windows Azure SDKs.  These SDKs are central to Azure development.   The .NET and Java SDKs are published under Apache 2.0 on Github and Microsoft is open to community contributions.  Accepting contributions is a more profound move than simply releasing code under FOSS licensing.  It means that Microsoft is wholeheartedly moving towards a full-blooded open source approach for future evolution of some of their central and most widely used .NET and Azure frameworks and libraries.  In conjunction with Scott's announcement, Microsoft has also released Git support for CodePlex (at long last!) and, perhaps more importantly, announced significant new investment in their own FOSS forge. Here at Solidsoft we have several reasons to be very interested in Scott's announcement. I'll draw attention to one of them.  Earlier this year we wrote the initial version of a new UK Government web application called CloudStore.  CloudStore provides a way for local and central government to discover and purchase applications and services. We wrote the web site using ASP.NET MVC which is FOSS.  However, this point has been lost on the ladies and gentlemen of the press and, I suspect, on some of the decision makers on the government side.  They announced a few weeks ago that future versions of CloudStore will move to a FOSS framework, clearly oblivious of the fact that it is already built on a FOSS framework.  We are, it is fair to say, mildly irked by the uninformed and badly out-of-date assumption that “if it is Microsoft, it can't be FOSS”.  Old prejudices live on.

  Read the article

• More Fun with C# Iterators and Generators

  - by James Michael Hare

  In my last post, I talked quite a bit about iterators and how they can be really powerful tools for filtering a list of items down to a subset of items.  This had both pros and cons over returning a full collection, which, in summary, were:   Pros: If traversal is only partial, does not have to visit rest of collection. If evaluation method is costly, only incurs that cost on elements visited. Adds little to no garbage collection pressure.    Cons: Very slight performance impact if you know caller will always consume all items in collection. And as we saw in the last post, that con for the cost was very, very small and only really became evident on very tight loops consuming very large lists completely.    One of the key items to note, though, is the garbage!  In the traditional (return a new collection) method, if you have a 1,000,000 element collection, and wish to transform or filter it in some way, you have to allocate space for that copy of the collection.  That is, say you have a collection of 1,000,000 items and you want to double every item in the collection.  Well, that means you have to allocate a collection to hold those 1,000,000 items to return, which is a lot especially if you are just going to use it once and toss it.   Iterators, though, don't have this problem.  Each time you visit the node, it would return the doubled value of the node (in this example) and not allocate a second collection of 1,000,000 doubled items.  Do you see the distinction?  In both cases, we're consuming 1,000,000 items.  But in one case we pass back each doubled item which is just an int (for example's sake) on the stack and in the other case, we allocate a list containing 1,000,000 items which then must be garbage collected.   So iterators in C# are pretty cool, eh?  Well, here's one more thing a C# iterator can do that a traditional "return a new collection" transformation can't!   It can return **unbounded** collections!   I know, I know, that smells a lot like an infinite loop, eh?  Yes and no.  Basically, you're relying on the caller to put the bounds on the list, and as long as the caller doesn't you keep going.  Consider this example:   public static class Fibonacci {     // returns the infinite fibonacci sequence     public static IEnumerable<int> Sequence()     {         int iteration = 0;         int first = 1;         int second = 1;         int current = 0;         while (true)         {             if (iteration++ < 2)             {                 current = 1;             }             else             {                 current = first + second;                 second = first;                 first = current;             }             yield return current;         }     } }   Whoa, you say!  Yes, that's an infinite loop!  What the heck is going on there?  Yes, that was intentional.  Would it be better to have a fibonacci sequence that returns only a specific number of items?  Perhaps, but that wouldn't give you the power to defer the execution to the caller.   The beauty of this function is it is as infinite as the sequence itself!  The fibonacci sequence is unbounded, and so is this method.  It will continue to return fibonacci numbers for as long as you ask for them.  Now that's not something you can do with a traditional method that would return a collection of ints representing each number.  In that case you would eventually run out of memory as you got to higher and higher numbers.  This method, though, never runs out of memory.   Now, that said, you do have to know when you use it that it is an infinite collection and bound it appropriately.  Fortunately, Linq provides a lot of these extension methods for you!   Let's say you only want the first 10 fibonacci numbers:       foreach(var fib in Fibonacci.Sequence().Take(10))     {         Console.WriteLine(fib);     }   Or let's say you only want the fibonacci numbers that are less than 100:       foreach(var fib in Fibonacci.Sequence().TakeWhile(f => f < 100))     {         Console.WriteLine(fib);     }   So, you see, one of the nice things about iterators is their power to work with virtually any size (even infinite) collections without adding the garbage collection overhead of making new collections.    You can also do fun things like this to make a more "fluent" interface for for loops:   // A set of integer generator extension methods public static class IntExtensions {     // Begins counting to inifity, use To() to range this.     public static IEnumerable<int> Every(this int start)     {         // deliberately avoiding condition because keeps going         // to infinity for as long as values are pulled.         for (var i = start; ; ++i)         {             yield return i;         }     }     // Begins counting to infinity by the given step value, use To() to     public static IEnumerable<int> Every(this int start, int byEvery)     {         // deliberately avoiding condition because keeps going         // to infinity for as long as values are pulled.         for (var i = start; ; i += byEvery)         {             yield return i;         }     }     // Begins counting to inifity, use To() to range this.     public static IEnumerable<int> To(this int start, int end)     {         for (var i = start; i <= end; ++i)         {             yield return i;         }     }     // Ranges the count by specifying the upper range of the count.     public static IEnumerable<int> To(this IEnumerable<int> collection, int end)     {         return collection.TakeWhile(item => item <= end);     } }   Note that there are two versions of each method.  One that starts with an int and one that starts with an IEnumerable<int>.  This is to allow more power in chaining from either an existing collection or from an int.  This lets you do things like:   // count from 1 to 30 foreach(var i in 1.To(30)) {     Console.WriteLine(i); }     // count from 1 to 10 by 2s foreach(var i in 0.Every(2).To(10)) {     Console.WriteLine(i); }     // or, if you want an infinite sequence counting by 5s until something inside breaks you out... foreach(var i in 0.Every(5)) {     if (someCondition)     {         break;     }     ... }     Yes, those are kinda play functions and not particularly useful, but they show some of the power of generators and extension methods to form a fluid interface.   So what do you think?  What are some of your favorite generators and iterators?

  Read the article

• JPA behaviour...

  - by Marcel

  Hi I have some trouble understanding a JPA behaviour. Mabye someone could give me a hint. Situation: Product entity: @Entity public class Product implements Serializable { ... @OneToMany(mappedBy="product", fetch=FetchType.EAGER) private List<ProductResource> productResources = new ArrayList<ProductResource>(); .... public List<ProductResource> getProductResources() { return productResources; } public boolean equals(Object obj) { if (obj == this) return true; if (obj == null) return false; if (!(obj instanceof Product)) return false; Product p = (Product) obj; return p.productId == productId; } } Resource entity: @Entity public class Resource implements Serializable { ... @OneToMany(mappedBy="resource", fetch=FetchType.EAGER) private List<ProductResource> productResources = new ArrayList<ProductResource>(); ... public void setProductResource(List<ProductResource> productResource) { this.productResources = productResource; } public List<ProductResource> getProductResources() { return productResources; } public boolean equals(Object obj) { if (obj == this) return true; if (obj == null) return false; if (!(obj instanceof Resource)) return false; Resource r = (Resource) obj; return (long)resourceId==(long)r.resourceId; } } ProductResource Entity: This is a JoinTable (association class) with additional properties (amount). It maps Product and Resources. @Entity public class ProductResource implements Serializable { ... @JoinColumn(nullable=false, updatable=false) @ManyToOne(fetch=FetchType.EAGER, cascade=CascadeType.PERSIST) private Product product; @JoinColumn(nullable=false, updatable=false) @ManyToOne(fetch=FetchType.EAGER, cascade=CascadeType.PERSIST) private Resource resource; private int amount; public void setProduct(Product product) { this.product = product; if(!product.getProductResources().contains((this))){ product.getProductResources().add(this); } } public Product getProduct() { return product; } public void setResource(Resource resource) { this.resource = resource; if(!resource.getProductResources().contains((this))){ resource.getProductResources().add(this); } } public Resource getResource() { return resource; } ... public boolean equals(Object obj) { if (obj == this) return true; if (obj == null) return false; if (!(obj instanceof ProductResource)) return false; ProductResource pr = (ProductResource) obj; return (long)pr.productResourceId == (long)productResourceId; } } This is the Session Bean (running on glassfish). @Stateless(mappedName="PersistenceManager") public class PersistenceManagerBean implements PersistenceManager { @PersistenceContext(unitName = "local_mysql") private EntityManager em; public Object create(Object entity) { em.persist(entity); return entity; } public void delete(Object entity) { em.remove(em.merge(entity)); } public Object retrieve(Class entityClass, Long id) { Object entity = em.find(entityClass, id); return entity; } public void update(Object entity) { em.merge(entity); } } I call the session Bean from a java client: public class Start { public static void main(String[] args) throws NamingException { PersistenceManager pm = (PersistenceManager) new InitialContext().lookup("java:global/BackITServer/PersistenceManagerBean"); ProductResource pr = new ProductResource(); Product p = new Product(); Resource r = new Resource(); pr.setProduct(p); pr.setResource(r); ProductResource pr_stored = (ProductResource) pm.create(pr); pm.delete(pr_stored); Product p_ret = (Product) pm.retrieve(Product.class, pr_stored.getProduct().getProductId()); // prints out true ???????????????????????????????????? System.out.println(p_ret.getProductResources().contains(pr_stored)); } } So here comes my problem. Why is the ProductResource entity still in the List productResources(see code above). The productResource tuple in the db is gone after the deletion and I do newly retrieve the Product entity. If I understood right every method call of the client happens in a new persistence context, but here i obviously get back the non-refreshed product object!? Any help is appreciated Thanks Marcel

  Read the article

• How to add correct cancellation when downloading a file with the example in the samples of the new P

  - by Mike

  Hello everybody, I have downloaded the last samples of the Parallel Programming team, and I don't succeed in adding correctly the possibility to cancel the download of a file. Here is the code I ended to have: var wreq = (HttpWebRequest)WebRequest.Create(uri); // Fire start event DownloadStarted(this, new DownloadStartedEventArgs(remoteFilePath)); long totalBytes = 0; wreq.DownloadDataInFileAsync(tmpLocalFile, cancellationTokenSource.Token, allowResume, totalBytesAction => { totalBytes = totalBytesAction; }, readBytes => { Log.Debug("Progression : {0} / {1} => {2}%", readBytes, totalBytes, 100 * (double)readBytes / totalBytes); DownloadProgress(this, new DownloadProgressEventArgs(remoteFilePath, readBytes, totalBytes, (int)(100 * readBytes / totalBytes))); }) .ContinueWith( (antecedent ) => { if (antecedent.IsFaulted) Log.Debug(antecedent.Exception.Message); //Fire end event SetEndDownload(antecedent.IsCanceled, antecedent.Exception, tmpLocalFile, 0); }, cancellationTokenSource.Token); I want to fire an end event after the download is finished, hence the ContinueWith. I slightly changed the code of the samples to add the CancellationToken and the 2 delegates to get the size of the file to download, and the progression of the download: return webRequest.GetResponseAsync() .ContinueWith(response => { if (totalBytesAction != null) totalBytesAction(response.Result.ContentLength); response.Result.GetResponseStream().WriteAllBytesAsync(filePath, ct, resumeDownload, progressAction).Wait(ct); }, ct); I had to add the call to the Wait function, because if I don't, the method exits and the end event is fired too early. Here are the modified method extensions (lot of code, apologies :p) public static Task WriteAllBytesAsync(this Stream stream, string filePath, CancellationToken ct, bool resumeDownload = false, Action<long> progressAction = null) { if (stream == null) throw new ArgumentNullException("stream"); // Copy from the source stream to the memory stream and return the copied data return stream.CopyStreamToFileAsync(filePath, ct, resumeDownload, progressAction); } public static Task CopyStreamToFileAsync(this Stream source, string destinationPath, CancellationToken ct, bool resumeDownload = false, Action<long> progressAction = null) { if (source == null) throw new ArgumentNullException("source"); if (destinationPath == null) throw new ArgumentNullException("destinationPath"); // Open the output file for writing var destinationStream = FileAsync.OpenWrite(destinationPath); // Copy the source to the destination stream, then close the output file. return CopyStreamToStreamAsync(source, destinationStream, ct, progressAction).ContinueWith(t => { var e = t.Exception; destinationStream.Close(); if (e != null) throw e; }, ct, TaskContinuationOptions.ExecuteSynchronously, TaskScheduler.Current); } public static Task CopyStreamToStreamAsync(this Stream source, Stream destination, CancellationToken ct, Action<long> progressAction = null) { if (source == null) throw new ArgumentNullException("source"); if (destination == null) throw new ArgumentNullException("destination"); return Task.Factory.Iterate(CopyStreamIterator(source, destination, ct, progressAction)); } private static IEnumerable<Task> CopyStreamIterator(Stream input, Stream output, CancellationToken ct, Action<long> progressAction = null) { // Create two buffers. One will be used for the current read operation and one for the current // write operation. We'll continually swap back and forth between them. byte[][] buffers = new byte[2][] { new byte[BUFFER_SIZE], new byte[BUFFER_SIZE] }; int filledBufferNum = 0; Task writeTask = null; int readBytes = 0; // Until there's no more data to be read or cancellation while (true) { ct.ThrowIfCancellationRequested(); // Read from the input asynchronously var readTask = input.ReadAsync(buffers[filledBufferNum], 0, buffers[filledBufferNum].Length); // If we have no pending write operations, just yield until the read operation has // completed. If we have both a pending read and a pending write, yield until both the read // and the write have completed. yield return writeTask == null ? readTask : Task.Factory.ContinueWhenAll(new[] { readTask, writeTask }, tasks => tasks.PropagateExceptions()); // If no data was read, nothing more to do. if (readTask.Result <= 0) break; readBytes += readTask.Result; if (progressAction != null) progressAction(readBytes); // Otherwise, write the written data out to the file writeTask = output.WriteAsync(buffers[filledBufferNum], 0, readTask.Result); // Swap buffers filledBufferNum ^= 1; } } So basically, at the end of the chain of called methods, I let the CancellationToken throw an OperationCanceledException if a Cancel has been requested. What I hoped was to get IsFaulted == true in the appealing code and to fire the end event with the canceled flags and the correct exception. But what I get is an unhandled exception on the line response.Result.GetResponseStream().WriteAllBytesAsync(filePath, ct, resumeDownload, progressAction).Wait(ct); telling me that I don't catch an AggregateException. I've tried various things, but I don't succeed to make the whole thing work properly. Does anyone of you have played enough with that library and may help me? Thanks in advance Mike

  Read the article

• Refactoring Part 1 : Intuitive Investments

  - by Wes McClure

  Fear, it’s what turns maintaining applications into a nightmare.  Technology moves on, teams move on, someone is left to operate the application, what was green is now perceived brown.  Eventually the business will evolve and changes will need to be made.  The approach to those changes often dictates the long term viability of the application.  Fear of change, lack of passion and a lack of interest in understanding the domain often leads to a paranoia to do anything that doesn’t involve duct tape and bailing twine.  Don’t get me wrong, those have a place in the short term viability of a project but they don’t have a place in the long term.  Add to it “us versus them” in regards to the original team and those that maintain it, internal politics and other factors and you have a recipe for disaster.  This results in code that quickly becomes unmanageable.  Even the most clever of designs will eventually become sub optimal and debt will amount that exponentially makes changes difficult.  This is where refactoring comes in, and it’s something I’m very passionate about.  Refactoring is about improving the process whereby we make change, it’s an exponential investment in the process of change. Without it we will incur exponential complexity that halts productivity. Investments, especially in the long term, require intuition and reflection.  How can we tackle new development effectively via evolving the original design and paying off debt that has been incurred? The longer we wait to ask and answer this question, the more it will cost us.  Small requests don’t warrant big changes, but realizing when changes now will pay off in the long term, and especially in the short term, is valuable. I have done my fair share of maintaining applications and continuously refactoring as needed, but recently I’ve begun work on a project that hasn’t had much debt, if any, paid down in years.  This is the first in a series of blog posts to try to capture the process which is largely driven by intuition of smaller refactorings from other projects. Signs that refactoring could help: Testability How can decreasing test time not pay dividends? One of the first things I found was that a very important piece often takes 30+ minutes to test.  I can only imagine how much time this has cost historically, but more importantly the time it might cost in the coming weeks: I estimate at least 10-20 hours per person!  This is simply unacceptable for almost any situation.  As it turns out, about 6 hours of working with this part of the application and I was able to cut the time down to under 30 seconds!  In less than the lost time of one week, I was able to fix the problem for all future weeks! If we can’t test fast then we can’t change fast, nor with confidence. Code is used by end users and it’s also used by developers, consider your own needs in terms of the code base.  Adding logic to enable/disable features during testing can help decouple parts of an application and lead to massive improvements.  What exactly is so wrong about test code in real code?  Often, these become features for operators and sometimes end users.  If you cannot run an integration test within a test runner in your IDE, it’s time to refactor. Readability Are variables named meaningfully via a ubiquitous language? Is the code segmented functionally or behaviorally so as to minimize the complexity of any one area? Are aspects properly segmented to avoid confusion (security, logging, transactions, translations, dependency management etc) Is the code declarative (what) or imperative (how)?  What matters, not how.  LINQ is a great abstraction of the what, not how, of collection manipulation.  The Reactive framework is a great example of the what, not how, of managing streams of data. Are constants abstracted and named, or are they just inline? Do people constantly bitch about the code/design? If the code is hard to understand, it will be hard to change with confidence.  It’s a large undertaking if the original designers didn’t pay much attention to readability and as such will never be done to “completion.”  Make sure not to go over board, instead use this as you change an application, not in lieu of changes (like with testability). Complexity Simplicity will never be achieved, it’s highly subjective.  That said, a lot of code can be significantly simplified, tidy it up as you go.  Refactoring will often converge upon a simplification step after enough time, keep an eye out for this. Understandability In the process of changing code, one often gains a better understanding of it.  Refactoring code is a good way to learn how it works.  However, it’s usually best in combination with other reasons, in effect killing two birds with one stone.  Often this is done when readability is poor, in which case understandability is usually poor as well.  In the large undertaking we are making with this legacy application, we will be replacing it.  Therefore, understanding all of its features is important and this refactoring technique will come in very handy. Unused code How can deleting things not help? This is a freebie in refactoring, it’s very easy to detect with modern tools, especially in statically typed languages.  We have VCS for a reason, if in doubt, delete it out (ok that was cheesy)! If you don’t know where to start when refactoring, this is an excellent starting point! Duplication Do not pray and sacrifice to the anti-duplication gods, there are excellent examples where consolidated code is a horrible idea, usually with divergent domains.  That said, mediocre developers live by copy/paste.  Other times features converge and aren’t combined.  Tools for finding similar code are great in the example of copy/paste problems.  Knowledge of the domain helps identify convergent concepts that often lead to convergent solutions and will give intuition for where to look for conceptual repetition. 80/20 and the Boy Scouts It’s often said that 80% of the time 20% of the application is used most.  These tend to be the parts that are changed.  There are also parts of the code where 80% of the time is spent changing 20% (probably for all the refactoring smells above).  I focus on these areas any time I make a change and follow the philosophy of the Boy Scout in cleaning up more than I messed up.  If I spend 2 hours changing an application, in the 20%, I’ll always spend at least 15 minutes cleaning it or nearby areas. This gives a huge productivity edge on developers that don’t. Ironically after a short period of time the 20% shrinks enough that we don’t have to spend 80% of our time there and can move on to other areas.   Refactoring is highly subjective, never attempt to refactor to completion!  Learn to be comfortable with leaving one part of the application in a better state than others.  It’s an evolution, not a revolution.  These are some simple areas to look into when making changes and can help get one started in the process.  I’ve often found that refactoring is a convergent process towards simplicity that sometimes spans a few hours but often can lead to massive simplifications over the timespan of weeks and months of regular development.

  Read the article

• WCF Bidirectional serialization fails

  - by Gena Verdel

  I'm trying to take advantage of Bidirectional serialization of some relational Linq-2-Sql generated entity classes. When using Unidirectional option everything works just fine, bu the moment I add IsReferenceType=true, objects fail to get transported over the tcp binding. Sample code: Entity class: [Table(Name="dbo.Blocks")] [DataContract()] public partial class Block : INotifyPropertyChanging, INotifyPropertyChanged { private static PropertyChangingEventArgs emptyChangingEventArgs = new PropertyChangingEventArgs(String.Empty); private long _ID; private int _StatusID; private string _Name; private bool _IsWithControlPoints; private long _DivisionID; private string _SHAPE; private EntitySet<BlockByWorkstation> _BlockByWorkstations; private EntitySet<PlanningPointAppropriation> _PlanningPointAppropriations; private EntitySet<Neighbor> _Neighbors; private EntitySet<Neighbor> _Neighbors1; private EntitySet<Task> _Tasks; private EntitySet<PlanningPointByBlock> _PlanningPointByBlocks; private EntitySet<ControlPointByBlock> _ControlPointByBlocks; private EntityRef<Division> _Division; private bool serializing; #region Extensibility Method Definitions partial void OnLoaded(); partial void OnValidate(System.Data.Linq.ChangeAction action); partial void OnCreated(); partial void OnIDChanging(long value); partial void OnIDChanged(); partial void OnStatusIDChanging(int value); partial void OnStatusIDChanged(); partial void OnNameChanging(string value); partial void OnNameChanged(); partial void OnIsWithControlPointsChanging(bool value); partial void OnIsWithControlPointsChanged(); partial void OnDivisionIDChanging(long value); partial void OnDivisionIDChanged(); partial void OnSHAPEChanging(string value); partial void OnSHAPEChanged(); #endregion public Block() { this.Initialize(); } [Column(Storage="_ID", AutoSync=AutoSync.OnInsert, DbType="BigInt NOT NULL IDENTITY", IsPrimaryKey=true, IsDbGenerated=true)] [DataMember(Order=1)] public override long ID { get { return this._ID; } set { if ((this._ID != value)) { this.OnIDChanging(value); this.SendPropertyChanging(); this._ID = value; this.SendPropertyChanged("ID"); this.OnIDChanged(); } } } [Column(Storage="_StatusID", DbType="Int NOT NULL")] [DataMember(Order=2)] public int StatusID { get { return this._StatusID; } set { if ((this._StatusID != value)) { this.OnStatusIDChanging(value); this.SendPropertyChanging(); this._StatusID = value; this.SendPropertyChanged("StatusID"); this.OnStatusIDChanged(); } } } [Column(Storage="_Name", DbType="NVarChar(255)")] [DataMember(Order=3)] public string Name { get { return this._Name; } set { if ((this._Name != value)) { this.OnNameChanging(value); this.SendPropertyChanging(); this._Name = value; this.SendPropertyChanged("Name"); this.OnNameChanged(); } } } [Column(Storage="_IsWithControlPoints", DbType="Bit NOT NULL")] [DataMember(Order=4)] public bool IsWithControlPoints { get { return this._IsWithControlPoints; } set { if ((this._IsWithControlPoints != value)) { this.OnIsWithControlPointsChanging(value); this.SendPropertyChanging(); this._IsWithControlPoints = value; this.SendPropertyChanged("IsWithControlPoints"); this.OnIsWithControlPointsChanged(); } } } [Column(Storage="_DivisionID", DbType="BigInt NOT NULL")] [DataMember(Order=5)] public long DivisionID { get { return this._DivisionID; } set { if ((this._DivisionID != value)) { if (this._Division.HasLoadedOrAssignedValue) { throw new System.Data.Linq.ForeignKeyReferenceAlreadyHasValueException(); } this.OnDivisionIDChanging(value); this.SendPropertyChanging(); this._DivisionID = value; this.SendPropertyChanged("DivisionID"); this.OnDivisionIDChanged(); } } } [Column(Storage="_SHAPE", DbType="Text", UpdateCheck=UpdateCheck.Never)] [DataMember(Order=6)] public string SHAPE { get { return this._SHAPE; } set { if ((this._SHAPE != value)) { this.OnSHAPEChanging(value); this.SendPropertyChanging(); this._SHAPE = value; this.SendPropertyChanged("SHAPE"); this.OnSHAPEChanged(); } } } [Association(Name="Block_BlockByWorkstation", Storage="_BlockByWorkstations", ThisKey="ID", OtherKey="BlockID")] [DataMember(Order=7, EmitDefaultValue=false)] public EntitySet<BlockByWorkstation> BlockByWorkstations { get { if ((this.serializing && (this._BlockByWorkstations.HasLoadedOrAssignedValues == false))) { return null; } return this._BlockByWorkstations; } set { this._BlockByWorkstations.Assign(value); } } [Association(Name="Block_PlanningPointAppropriation", Storage="_PlanningPointAppropriations", ThisKey="ID", OtherKey="MasterBlockID")] [DataMember(Order=8, EmitDefaultValue=false)] public EntitySet<PlanningPointAppropriation> PlanningPointAppropriations { get { if ((this.serializing && (this._PlanningPointAppropriations.HasLoadedOrAssignedValues == false))) { return null; } return this._PlanningPointAppropriations; } set { this._PlanningPointAppropriations.Assign(value); } } [Association(Name="Block_Neighbor", Storage="_Neighbors", ThisKey="ID", OtherKey="FirstBlockID")] [DataMember(Order=9, EmitDefaultValue=false)] public EntitySet<Neighbor> Neighbors { get { if ((this.serializing && (this._Neighbors.HasLoadedOrAssignedValues == false))) { return null; } return this._Neighbors; } set { this._Neighbors.Assign(value); } } [Association(Name="Block_Neighbor1", Storage="_Neighbors1", ThisKey="ID", OtherKey="SecondBlockID")] [DataMember(Order=10, EmitDefaultValue=false)] public EntitySet<Neighbor> Neighbors1 { get { if ((this.serializing && (this._Neighbors1.HasLoadedOrAssignedValues == false))) { return null; } return this._Neighbors1; } set { this._Neighbors1.Assign(value); } } [Association(Name="Block_Task", Storage="_Tasks", ThisKey="ID", OtherKey="BlockID")] [DataMember(Order=11, EmitDefaultValue=false)] public EntitySet<Task> Tasks { get { if ((this.serializing && (this._Tasks.HasLoadedOrAssignedValues == false))) { return null; } return this._Tasks; } set { this._Tasks.Assign(value); } } [Association(Name="Block_PlanningPointByBlock", Storage="_PlanningPointByBlocks", ThisKey="ID", OtherKey="BlockID")] [DataMember(Order=12, EmitDefaultValue=false)] public EntitySet<PlanningPointByBlock> PlanningPointByBlocks { get { if ((this.serializing && (this._PlanningPointByBlocks.HasLoadedOrAssignedValues == false))) { return null; } return this._PlanningPointByBlocks; } set { this._PlanningPointByBlocks.Assign(value); } } [Association(Name="Block_ControlPointByBlock", Storage="_ControlPointByBlocks", ThisKey="ID", OtherKey="BlockID")] [DataMember(Order=13, EmitDefaultValue=false)] public EntitySet<ControlPointByBlock> ControlPointByBlocks { get { if ((this.serializing && (this._ControlPointByBlocks.HasLoadedOrAssignedValues == false))) { return null; } return this._ControlPointByBlocks; } set { this._ControlPointByBlocks.Assign(value); } } [Association(Name="Division_Block", Storage="_Division", ThisKey="DivisionID", OtherKey="ID", IsForeignKey=true, DeleteOnNull=true, DeleteRule="CASCADE")] public Division Division { get { return this._Division.Entity; } set { Division previousValue = this._Division.Entity; if (((previousValue != value) || (this._Division.HasLoadedOrAssignedValue == false))) { this.SendPropertyChanging(); if ((previousValue != null)) { this._Division.Entity = null; previousValue.Blocks.Remove(this); } this._Division.Entity = value; if ((value != null)) { value.Blocks.Add(this); this._DivisionID = value.ID; } else { this._DivisionID = default(long); } this.SendPropertyChanged("Division"); } } } public event PropertyChangingEventHandler PropertyChanging; public event PropertyChangedEventHandler PropertyChanged; protected virtual void SendPropertyChanging() { if ((this.PropertyChanging != null)) { this.PropertyChanging(this, emptyChangingEventArgs); } } protected virtual void SendPropertyChanged(String propertyName) { if ((this.PropertyChanged != null)) { this.PropertyChanged(this, new PropertyChangedEventArgs(propertyName)); } } private void attach_BlockByWorkstations(BlockByWorkstation entity) { this.SendPropertyChanging(); entity.Block = this; } private void detach_BlockByWorkstations(BlockByWorkstation entity) { this.SendPropertyChanging(); entity.Block = null; } private void attach_PlanningPointAppropriations(PlanningPointAppropriation entity) { this.SendPropertyChanging(); entity.Block = this; } private void detach_PlanningPointAppropriations(PlanningPointAppropriation entity) { this.SendPropertyChanging(); entity.Block = null; } private void attach_Neighbors(Neighbor entity) { this.SendPropertyChanging(); entity.FirstBlock = this; } private void detach_Neighbors(Neighbor entity) { this.SendPropertyChanging(); entity.FirstBlock = null; } private void attach_Neighbors1(Neighbor entity) { this.SendPropertyChanging(); entity.SecondBlock = this; } private void detach_Neighbors1(Neighbor entity) { this.SendPropertyChanging(); entity.SecondBlock = null; } private void attach_Tasks(Task entity) { this.SendPropertyChanging(); entity.Block = this; } private void detach_Tasks(Task entity) { this.SendPropertyChanging(); entity.Block = null; } private void attach_PlanningPointByBlocks(PlanningPointByBlock entity) { this.SendPropertyChanging(); entity.Block = this; } private void detach_PlanningPointByBlocks(PlanningPointByBlock entity) { this.SendPropertyChanging(); entity.Block = null; } private void attach_ControlPointByBlocks(ControlPointByBlock entity) { this.SendPropertyChanging(); entity.Block = this; } private void detach_ControlPointByBlocks(ControlPointByBlock entity) { this.SendPropertyChanging(); entity.Block = null; } private void Initialize() { this._BlockByWorkstations = new EntitySet<BlockByWorkstation>(new Action<BlockByWorkstation>(this.attach_BlockByWorkstations), new Action<BlockByWorkstation>(this.detach_BlockByWorkstations)); this._PlanningPointAppropriations = new EntitySet<PlanningPointAppropriation>(new Action<PlanningPointAppropriation>(this.attach_PlanningPointAppropriations), new Action<PlanningPointAppropriation>(this.detach_PlanningPointAppropriations)); this._Neighbors = new EntitySet<Neighbor>(new Action<Neighbor>(this.attach_Neighbors), new Action<Neighbor>(this.detach_Neighbors)); this._Neighbors1 = new EntitySet<Neighbor>(new Action<Neighbor>(this.attach_Neighbors1), new Action<Neighbor>(this.detach_Neighbors1)); this._Tasks = new EntitySet<Task>(new Action<Task>(this.attach_Tasks), new Action<Task>(this.detach_Tasks)); this._PlanningPointByBlocks = new EntitySet<PlanningPointByBlock>(new Action<PlanningPointByBlock>(this.attach_PlanningPointByBlocks), new Action<PlanningPointByBlock>(this.detach_PlanningPointByBlocks)); this._ControlPointByBlocks = new EntitySet<ControlPointByBlock>(new Action<ControlPointByBlock>(this.attach_ControlPointByBlocks), new Action<ControlPointByBlock>(this.detach_ControlPointByBlocks)); this._Division = default(EntityRef<Division>); OnCreated(); } [OnDeserializing()] [System.ComponentModel.EditorBrowsableAttribute(EditorBrowsableState.Never)] public void OnDeserializing(StreamingContext context) { this.Initialize(); } [OnSerializing()] [System.ComponentModel.EditorBrowsableAttribute(EditorBrowsableState.Never)] public void OnSerializing(StreamingContext context) { this.serializing = true; } [OnSerialized()] [System.ComponentModel.EditorBrowsableAttribute(EditorBrowsableState.Never)] public void OnSerialized(StreamingContext context) { this.serializing = false; } } App.config: <?xml version="1.0" encoding="utf-8" ?> <configuration> <system.web> <compilation debug="true" /> </system.web> <!-- When deploying the service library project, the content of the config file must be added to the host's app.config file. System.Configuration does not support config files for libraries. --> <system.serviceModel> <services> <service behaviorConfiguration="debugging" name="DBServicesLibrary.DBService"> </service> </services> <behaviors> <serviceBehaviors> <behavior name="DBServicesLibrary.DBServiceBehavior"> <!-- To avoid disclosing metadata information, set the value below to false and remove the metadata endpoint above before deployment --> <serviceMetadata httpGetEnabled="True"/> <!-- To receive exception details in faults for debugging purposes, set the value below to true. Set to false before deployment to avoid disclosing exception information --> <serviceDebug includeExceptionDetailInFaults="False" /> </behavior> <behavior name="debugging"> <serviceDebug includeExceptionDetailInFaults="true"/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> </configuration> Host part: ServiceHost svh = new ServiceHost(typeof(DBService)); svh.AddServiceEndpoint( typeof(DBServices.Contract.IDBService), new NetTcpBinding(), "net.tcp://localhost:8000"); Client part: ChannelFactory<DBServices.Contract.IDBService> scf; scf = new ChannelFactory<DBServices.Contract.IDBService>(new NetTcpBinding(),"net.tcp://localhost:8000"); _serv = scf.CreateChannel(); ((IContextChannel)_serv).OperationTimeout = new TimeSpan(0, 5, 0);

  Read the article

• Convert Java program to C

  - by imicrothinking

  I need a bit of guidance with writing a C program...a bit of quick background as to my level, I've programmed in Java previously, but this is my first time programming in C, and we've been tasked to translate a word count program from Java to C that consists of the following: Read a file from memory Count the words in the file For each occurrence of a unique word, keep a word counter variable Print out the top ten most frequent words and their corresponding occurrences Here's the source program in Java: package lab0; import java.io.File; import java.io.FileReader; import java.util.ArrayList; import java.util.Calendar; import java.util.Collections; public class WordCount { private ArrayList<WordCountNode> outputlist = null; public WordCount(){ this.outputlist = new ArrayList<WordCountNode>(); } /** * Read the file into memory. * * @param filename name of the file. * @return content of the file. * @throws Exception if the file is too large or other file related exception. */ public char[] readFile(String filename) throws Exception{ char [] result = null; File file = new File(filename); long size = file.length(); if (size > Integer.MAX_VALUE){ throw new Exception("File is too large"); } result = new char[(int)size]; FileReader reader = new FileReader(file); int len, offset = 0, size2read = (int)size; while(size2read > 0){ len = reader.read(result, offset, size2read); if(len == -1) break; size2read -= len; offset += len; } return result; } /** * Make article word by word. * * @param article the content of file to be counted. * @return string contains only letters and "'". */ private enum SPLIT_STATE {IN_WORD, NOT_IN_WORD}; /** * Go through article, find all the words and add to output list * with their count. * * @param article the content of the file to be counted. * @return words in the file and their counts. */ public ArrayList<WordCountNode> countWords(char[] article){ SPLIT_STATE state = SPLIT_STATE.NOT_IN_WORD; if(null == article) return null; char curr_ltr; int curr_start = 0; for(int i = 0; i < article.length; i++){ curr_ltr = Character.toUpperCase( article[i]); if(state == SPLIT_STATE.IN_WORD){ article[i] = curr_ltr; if ((curr_ltr < 'A' || curr_ltr > 'Z') && curr_ltr != '\'') { article[i] = ' '; //printf("\nthe word is %s\n\n",curr_start); if(i - curr_start < 0){ System.out.println("i = " + i + " curr_start = " + curr_start); } addWord(new String(article, curr_start, i-curr_start)); state = SPLIT_STATE.NOT_IN_WORD; } }else{ if (curr_ltr >= 'A' && curr_ltr <= 'Z') { curr_start = i; article[i] = curr_ltr; state = SPLIT_STATE.IN_WORD; } } } return outputlist; } /** * Add the word to output list. */ public void addWord(String word){ int pos = dobsearch(word); if(pos >= outputlist.size()){ outputlist.add(new WordCountNode(1L, word)); }else{ WordCountNode tmp = outputlist.get(pos); if(tmp.getWord().compareTo(word) == 0){ tmp.setCount(tmp.getCount() + 1); }else{ outputlist.add(pos, new WordCountNode(1L, word)); } } } /** * Search the output list and return the position to put word. * @param word is the word to be put into output list. * @return position in the output list to insert the word. */ public int dobsearch(String word){ int cmp, high = outputlist.size(), low = -1, next; // Binary search the array to find the key while (high - low > 1) { next = (high + low) / 2; // all in upper case cmp = word.compareTo((outputlist.get(next)).getWord()); if (cmp == 0) return next; else if (cmp < 0) high = next; else low = next; } return high; } public static void main(String args[]){ // handle input if (args.length == 0){ System.out.println("USAGE: WordCount <filename> [Top # of results to display]\n"); System.exit(1); } String filename = args[0]; int dispnum; try{ dispnum = Integer.parseInt(args[1]); }catch(Exception e){ dispnum = 10; } long start_time = Calendar.getInstance().getTimeInMillis(); WordCount wordcount = new WordCount(); System.out.println("Wordcount: Running..."); // read file char[] input = null; try { input = wordcount.readFile(filename); } catch (Exception e) { // TODO Auto-generated catch block e.printStackTrace(); System.exit(1); } // count all word ArrayList<WordCountNode> result = wordcount.countWords(input); long end_time = Calendar.getInstance().getTimeInMillis(); System.out.println("wordcount: completed " + (end_time - start_time)/1000000 + "." + (end_time - start_time)%1000000 + "(s)"); System.out.println("wordsort: running ..."); start_time = Calendar.getInstance().getTimeInMillis(); Collections.sort(result); end_time = Calendar.getInstance().getTimeInMillis(); System.out.println("wordsort: completed " + (end_time - start_time)/1000000 + "." + (end_time - start_time)%1000000 + "(s)"); Collections.reverse(result); System.out.println("\nresults (TOP "+ dispnum +" from "+ result.size() +"):\n" ); // print out result String str ; for (int i = 0; i < result.size() && i < dispnum; i++){ if(result.get(i).getWord().length() > 15) str = result.get(i).getWord().substring(0, 14); else str = result.get(i).getWord(); System.out.println(str + " - " + result.get(i).getCount()); } } public class WordCountNode implements Comparable{ private String word; private long count; public WordCountNode(long count, String word){ this.count = count; this.word = word; } public String getWord() { return word; } public void setWord(String word) { this.word = word; } public long getCount() { return count; } public void setCount(long count) { this.count = count; } public int compareTo(Object arg0) { // TODO Auto-generated method stub WordCountNode obj = (WordCountNode)arg0; if( count - obj.getCount() < 0) return -1; else if( count - obj.getCount() == 0) return 0; else return 1; } } } Here's my attempt (so far) in C: #include <stdio.h> #include <stdlib.h> #include <stdbool.h> #include <string.h> // Read in a file FILE *readFile (char filename[]) { FILE *inputFile; inputFile = fopen (filename, "r"); if (inputFile == NULL) { printf ("File could not be opened.\n"); exit (EXIT_FAILURE); } return inputFile; } // Return number of words in an array int wordCount (FILE *filePointer, char filename[]) {//, char *words[]) { // count words int count = 0; char temp; while ((temp = getc(filePointer)) != EOF) { //printf ("%c", temp); if ((temp == ' ' || temp == '\n') && (temp != '\'')) count++; } count += 1; // counting method uses space AFTER last character in word - the last space // of the last character isn't counted - off by one error // close file fclose (filePointer); return count; } // Print out the frequencies of the 10 most frequent words in the console int main (int argc, char *argv[]) { /* Step 1: Read in file and check for errors */ FILE *filePointer; filePointer = readFile (argv[1]); /* Step 2: Do a word count to prep for array size */ int count = wordCount (filePointer, argv[1]); printf ("Number of words is: %i\n", count); /* Step 3: Create a 2D array to store words in the file */ // open file to reset marker to beginning of file filePointer = fopen (argv[1], "r"); // store words in character array (each element in array = consecutive word) char allWords[count][100]; // 100 is an arbitrary size - max length of word int i,j; char temp; for (i = 0; i < count; i++) { for (j = 0; j < 100; j++) { // labels are used with goto statements, not loops in C temp = getc(filePointer); if ((temp == ' ' || temp == '\n' || temp == EOF) && (temp != '\'') ) { allWords[i][j] = '\0'; break; } else { allWords[i][j] = temp; } printf ("%c", allWords[i][j]); } printf ("\n"); } // close file fclose (filePointer); /* Step 4: Use a simple selection sort algorithm to sort 2D char array */ // PStep 1: Compare two char arrays, and if // (a) c1 > c2, return 2 // (b) c1 == c2, return 1 // (c) c1 < c2, return 0 qsort(allWords, count, sizeof(char[][]), pstrcmp); /* int k = 0, l = 0, m = 0; char currentMax, comparedElement; int max; // the largest element in the current 2D array int elementToSort = 0; // elementToSort determines the element to swap with starting from the left // Outer a iterates through number of swaps needed for (k = 0; k < count - 1; k++) { // times of swaps max = k; // max element set to k // Inner b iterates through successive elements to fish out the largest element for (m = k + 1; m < count - k; m++) { currentMax = allWords[k][l]; comparedElement = allWords[m][l]; // Inner c iterates through successive chars to set the max vars to the largest for (l = 0; (currentMax != '\0' || comparedElement != '\0'); l++) { if (currentMax > comparedElement) break; else if (currentMax < comparedElement) { max = m; currentMax = allWords[m][l]; break; } else if (currentMax == comparedElement) continue; } } // After max (count and string) is determined, perform swap with temp variable char swapTemp[1][20]; int y = 0; do { swapTemp[0][y] = allWords[elementToSort][y]; allWords[elementToSort][y] = allWords[max][y]; allWords[max][y] = swapTemp[0][y]; } while (swapTemp[0][y++] != '\0'); elementToSort++; } */ int a, b; for (a = 0; a < count; a++) { for (b = 0; (temp = allWords[a][b]) != '\0'; b++) { printf ("%c", temp); } printf ("\n"); } // Copy rows to different array and print results /* char arrayCopy [count][20]; int ac, ad; char tempa; for (ac = 0; ac < count; ac++) { for (ad = 0; (tempa = allWords[ac][ad]) != '\0'; ad++) { arrayCopy[ac][ad] = tempa; printf("%c", arrayCopy[ac][ad]); } printf("\n"); } */ /* Step 5: Create two additional arrays: (a) One in which each element contains unique words from char array (b) One which holds the count for the corresponding word in the other array */ /* Step 6: Sort the count array in decreasing order, and print the corresponding array element as well as word count in the console */ return 0; } // Perform housekeeping tasks like freeing up memory and closing file I'm really stuck on the selection sort algorithm. I'm currently using 2D arrays to represent strings, and that worked out fine, but when it came to sorting, using three level nested loops didn't seem to work, I tried to use qsort instead, but I don't fully understand that function as well. Constructive feedback and criticism greatly welcome (...and needed)!

  Read the article

• HttpURLConnection! Connection.getInputStream is java.io.FileNotFoundException

  - by user3643283

  I created a method "UPLPAD2" to upload file to server. Splitting my file to packets(10MB). It's OK (100%). But when i call getInputStream, i get FileNotFoundException. I think, in loop, i make new HttpURLConnection to set "setRequestProperty". This is a problem. Here's my code: @SuppressLint("NewApi") public int upload2(URL url, String filePath, OnProgressUpdate progressCallBack, AtomicInteger cancelHandle) throws IOException { HttpURLConnection connection = null; InputStream fileStream = null; OutputStream out = null; InputStream in = null; HttpResponse response = new HttpResponse(); Log.e("Upload_Url_Util", url.getFile()); Log.e("Upload_FilePath_Util", filePath); long total = 0; try { // Write the request. // Read from filePath and upload to server (url) byte[] buf = new byte[1024]; fileStream = new FileInputStream(filePath); long lenghtOfFile = (new java.io.File(filePath)).length(); Log.e("LENGHT_Of_File", lenghtOfFile + ""); int totalPacket = 5 * 1024 * 1024; // 10 MB int totalChunk = (int) ((lenghtOfFile + (totalPacket - 1)) / totalPacket); String headerValue = ""; String contentLenght = ""; for (int i = 0; i < totalChunk; i++) { long from = i * totalPacket; long to = 0; if ((from + totalPacket) > lenghtOfFile) { to = lenghtOfFile; } else { to = (totalPacket * (i + 1)); } to = to - 1; headerValue = "bytes " + from + "-" + to + "/" + lenghtOfFile; contentLenght = "Content-Length:" + (to - from + 1); Log.e("Conten_LENGHT", contentLenght); connection = client.open(url); connection.setRequestMethod("POST"); connection.setRequestProperty("Content-Range", headerValue); connection.setRequestProperty("Content-Length", Long.toString(to - from + 1)); out = connection.getOutputStream(); Log.e("Lenght_Of_File", lenghtOfFile + ""); Log.e("Total_Packet", totalPacket + ""); Log.e("Total_Chunk", totalChunk + ""); Log.e("Header_Valure", headerValue); int read = 1; while (read > 0 && cancelHandle.intValue() == 0 && total < totalPacket * (i + 1)) { read = fileStream.read(buf); if (read > 0) { out.write(buf, 0, read); total += read; progressCallBack .onProgressUpdate((int) ((total * 100) / lenghtOfFile)); } } Log.e("TOTAL_", total + "------" + totalPacket * (i + 1)); Log.e("I_", i + ""); Log.e("LENGHT_Of_File", lenghtOfFile + ""); if (i < totalChunk - 1) { connection.disconnect(); } out.close(); } // Read the response. response.setHttpCode(connection.getResponseCode()); in = connection.getInputStream(); // I GET ERROR HERE. if (connection.getResponseCode() != HttpURLConnection.HTTP_OK) { throw new IOException("Unexpected HTTP response: " + connection.getResponseCode() + " " + connection.getResponseMessage()); } byte[] body = readFully(in); response.setBody(body); response.setHeaderFields(connection.getHeaderFields()); if (cancelHandle.intValue() != 0) { return 1; } JSONObject jo = new JSONObject(response.getBodyAsString()); Log.e("Upload_Body_res_", response.getBodyAsString()); if (jo.has("error")) { if (jo.has("code")) { int errCode = jo.getInt("code"); Log.e("Upload_Had_errcode", errCode + ""); return errCode; } else { return 504; } } Log.e("RESPONE_BODY_UPLOAD", response.getBodyAsString() + ""); return 0; } catch (Exception e) { e.printStackTrace(); Log.e("Http_UpLoad_Response_Exception", e.toString()); response.setHttpCode(connection.getResponseCode()); Log.e("ErrorCode_Upload_Util_Return", response.getHttpCode() + ""); if (connection.getResponseCode() == 200) { return 1; } else if (connection.getResponseCode() == 0) { return 1; } else { return response.getHttpCode(); } // Log.e("ErrorCode_Upload_Util_Return", response.getHttpCode()+""); } finally { if (fileStream != null) fileStream.close(); if (out != null) out.close(); if (in != null) in.close(); } } And Logcat 06-12 09:39:29.558: W/System.err(30740): java.io.FileNotFoundException: http://download-f77c.fshare.vn/upload/NRHAwh+bUCxjUtcD4cn9xqkADpdL32AT9pZm7zaboHLwJHLxOPxUX9CQxOeBRgelkjeNM5XcK11M1V-x 06-12 09:39:29.558: W/System.err(30740): at com.squareup.okhttp.internal.http.HttpURLConnectionImpl.getInputStream(HttpURLConnectionImpl.java:187) 06-12 09:39:29.563: W/System.err(30740): at com.fsharemobile.client.HttpUtil.upload2(HttpUtil.java:383) 06-12 09:39:29.563: W/System.err(30740): at com.fsharemobile.fragments.ExplorerFragment$7$1.run(ExplorerFragment.java:992) 06-12 09:39:29.568: W/System.err(30740): at java.lang.Thread.run(Thread.java:856) 06-12 09:39:29.568: E/Http_UpLoad_Response_Exception(30740): java.io.FileNotFoundException: http://download-f77c.fshare.vn/upload/NRHAwh+bUCxjUtcD4cn9xqkADpdL32AT9pZm7zaboHLwJHLxOPxUX9CQxOeBRgelkjeNM5XcK11M1V-x

  Read the article

• Change English numbers to Persian and vice versa in MVC (httpmodule)?

  - by Mohammad

  I wanna change all English numbers to Persian for showing to users. and change them to English numbers again for giving all requests (Postbacks) e.g: we have something like this in view IRQ170, I wanna show IRQ??? to users and give IRQ170 from users. I know, I have to use Httpmodule, But I don't know how ? Could you please guide me? Edit : Let me describe more : I've written the following http module : using System; using System.Collections.Specialized; using System.Diagnostics; using System.IO; using System.Text; using System.Text.RegularExpressions; using System.Web; using System.Web.UI; using Smartiz.Common; namespace Smartiz.UI.Classes { public class PersianNumberModule : IHttpModule { private StreamWatcher _watcher; #region Implementation of IHttpModule /// <summary> /// Initializes a module and prepares it to handle requests. /// </summary> /// <param name="context">An <see cref="T:System.Web.HttpApplication"/> that provides access to the methods, properties, and events common to all application objects within an ASP.NET application </param> public void Init(HttpApplication context) { context.BeginRequest += ContextBeginRequest; context.EndRequest += ContextEndRequest; } /// <summary> /// Disposes of the resources (other than memory) used by the module that implements <see cref="T:System.Web.IHttpModule"/>. /// </summary> public void Dispose() { } #endregion private void ContextBeginRequest(object sender, EventArgs e) { HttpApplication context = sender as HttpApplication; if (context == null) return; _watcher = new StreamWatcher(context.Response.Filter); context.Response.Filter = _watcher; } private void ContextEndRequest(object sender, EventArgs e) { HttpApplication context = sender as HttpApplication; if (context == null) return; _watcher = new StreamWatcher(context.Response.Filter); context.Response.Filter = _watcher; } } public class StreamWatcher : Stream { private readonly Stream _stream; private readonly MemoryStream _memoryStream = new MemoryStream(); public StreamWatcher(Stream stream) { _stream = stream; } public override void Flush() { _stream.Flush(); } public override int Read(byte[] buffer, int offset, int count) { int bytesRead = _stream.Read(buffer, offset, count); string orgContent = Encoding.UTF8.GetString(buffer, offset, bytesRead); string newContent = orgContent.ToEnglishNumber(); int newByteCountLength = Encoding.UTF8.GetByteCount(newContent); Encoding.UTF8.GetBytes(newContent, 0, Encoding.UTF8.GetByteCount(newContent), buffer, 0); return newByteCountLength; } public override void Write(byte[] buffer, int offset, int count) { string strBuffer = Encoding.UTF8.GetString(buffer, offset, count); MatchCollection htmlAttributes = Regex.Matches(strBuffer, @"(\S+)=[""']?((?:.(?![""']?\s+(?:\S+)=|[>""']))+.)[""']?", RegexOptions.IgnoreCase | RegexOptions.Multiline); foreach (Match match in htmlAttributes) { strBuffer = strBuffer.Replace(match.Value, match.Value.ToEnglishNumber()); } MatchCollection scripts = Regex.Matches(strBuffer, "<script[^>]*>(.*?)</script>", RegexOptions.Singleline | RegexOptions.IgnoreCase | RegexOptions.Multiline | RegexOptions.IgnorePatternWhitespace); foreach (Match match in scripts) { MatchCollection values = Regex.Matches(match.Value, @"([""'])(?:(?=(\\?))\2.)*?\1", RegexOptions.Singleline | RegexOptions.IgnoreCase | RegexOptions.Multiline | RegexOptions.IgnorePatternWhitespace); foreach (Match stringValue in values) { strBuffer = strBuffer.Replace(stringValue.Value, stringValue.Value.ToEnglishNumber()); } } MatchCollection styles = Regex.Matches(strBuffer, "<style[^>]*>(.*?)</style>", RegexOptions.Singleline | RegexOptions.IgnoreCase | RegexOptions.Multiline | RegexOptions.IgnorePatternWhitespace); foreach (Match match in styles) { strBuffer = strBuffer.Replace(match.Value, match.Value.ToEnglishNumber()); } byte[] data = Encoding.UTF8.GetBytes(strBuffer); _memoryStream.Write(data, offset, count); _stream.Write(data, offset, count); } public override string ToString() { return Encoding.UTF8.GetString(_memoryStream.ToArray()); } #region Rest of the overrides public override bool CanRead { get { throw new NotImplementedException(); } } public override bool CanSeek { get { throw new NotImplementedException(); } } public override bool CanWrite { get { throw new NotImplementedException(); } } public override long Seek(long offset, SeekOrigin origin) { throw new NotImplementedException(); } public override void SetLength(long value) { throw new NotImplementedException(); } public override long Length { get { throw new NotImplementedException(); } } public override long Position { get { throw new NotImplementedException(); } set { throw new NotImplementedException(); } } #endregion } } It works well, but It converts all numbers in css and scripts files to Persian and it causes error.

  Read the article

• Android FTP seek Bar issue

  - by Androi Developer

  I am trying to Upload & Download file to server using FTP and Download File using HTTP i am able to do this, my problem is when i am trying to show seek bar with Upload status of file using ftp then it's not showing. In this attached image Using HTTP it's showing seekbar with Network spped like this i need to display seek bar & Network sppeed in FTP. Below code i wrote for FTP to upload file into server. Code:-- // Upload System.out.println("upload test is called"); //Toast.makeText(con, "upload FTP test is called", Toast.LENGTH_SHORT).show(); //ContextWrapper context = null; //assetManager= context.getAssets(); assetManager = getResources().getAssets(); input1 = assetManager.open("hello.txt"); final long started = System.currentTimeMillis(); int size = input1.available(); //byte[] buffer = new byte[size]; byte dataByte[] = new byte[1024]; //input1.read(buffer); //String data = "ZK DATA TESTER TEST DATA1sdfsdf"; String data = input1.toString(); System.out.println("dat value is........"+data); final int lenghtOfFile = data.getBytes().length; //final int lenghtOfFile = input1.getBytes().length; System.out.println("length of file....."+lenghtOfFile); ByteArrayInputStream in = new ByteArrayInputStream( data.getBytes()); //toast("Uploading /test.txt"); //Toast.makeText(con,"File Size : " +data.getBytes().length + " bytes",Toast.LENGTH_SHORT).show(); //byte b[] = new byte[1024]; long total = 0; long sleepingTime= 0; System.out.println("started time --"+started); updateUI(status, "Uploading"); while ((count = in.read(dataByte)) != -1) { System.out.println("read value is...."+in.read(dataByte)); while (sleep1) { Thread.sleep(1000); System.out.println("ftp upload is in sleeping mode"); sleepingTime +=1000; } System.out.println("Total count --"+count); total += count; System.out.println("Only Total --"+total); final int progress = (int) ((total * 100) / lenghtOfFile); final long speed = total; //duration = ((System.currentTimeMillis() - started)-sleepingTime) / 1000; boolean result = ObjFtpCon.storeFile("/test.txt", input1); //boolean result = ObjFtpCon.storeFile(map.get("file_address").toString()+"/test.txt", input1); duration = ((System.currentTimeMillis() - started)-sleepingTime) / 1000; /* runOnUiThread(new Runnable() { public void run() { bar.setProgress(progress); // trans.setText("" + progress); //duration = ((System.currentTimeMillis() - started)-sleepingTime) / 1000; //duration = ((System.currentTimeMillis() - started)-sleepingTime) / 1000; //real_time.setText(duration + " secs"); if (duration != 0) { test_avg.setText((((speed / duration)*1000)*0.0078125) + " kbps"); if (pk <= (speed / duration) / 1024) { pk = (speed / duration) / 1024; } if (pk <= ((speed / duration)*1000)*0.0078125) { pk = (long)(((speed / duration)*1000)*0.0078125); } //peak.setText(pk + " kbps"); } } });*/ //in.close(); if (result) { updateUI(status, "Uploaded"); // toast("Uploading succeeded"); // toast("Uploaded at /test.txt"); //duration = ((System.currentTimeMillis() - started)-sleepingTime) / 1000; System.out.println("curreent time..... "+System.currentTimeMillis()); System.out.println("started time --"+started); System.out.println("sleep tome...."+sleepingTime); System.out.println("duration is....."+duration); runOnUiThread(new Runnable() { public void run() { bar.setProgress(progress); // trans.setText("" + progress); //duration = ((System.currentTimeMillis() - started)-sleepingTime) / 1000; real_time.setText(duration + " secs"); if (duration != 0) { test_avg.setText((speed / duration) / 1024 + " kbps"); if (pk <= (speed / duration) / 1024) { pk = (speed / duration) / 1024; } peak.setText(pk + " kbps"); } } }); } /*while(!result){Thread.sleep(1000);}*/ } in.close();

  Read the article

• opengl problem works on droid but not droid eris and others.

  - by nathan

  This GlRenderer works fine on the moto droid, but does not work well at all on droid eris or other android phones does anyone know why? package com.ntu.way2fungames.spacehockeybase; import java.io.DataInputStream; import java.io.IOException; import java.nio.Buffer; import java.nio.FloatBuffer; import javax.microedition.khronos.egl.EGLConfig; import javax.microedition.khronos.opengles.GL10; import com.ntu.way2fungames.LoadFloatArray; import com.ntu.way2fungames.OGLTriReader; import android.content.res.AssetManager; import android.content.res.Resources; import android.opengl.GLU; import android.opengl.GLSurfaceView.Renderer; import android.os.Handler; import android.os.Message; public class GlRenderer extends Thread implements Renderer { private float drawArray[]; private float yoff; private float yoff2; private long lastRenderTime; private float[] yoffs= new float[10]; int Width; int Height; private float[] pixelVerts = new float[] { +.0f,+.0f,2, +.5f,+.5f,0, +.5f,-.5f,0, +.0f,+.0f,2, +.5f,-.5f,0, -.5f,-.5f,0, +.0f,+.0f,2, -.5f,-.5f,0, -.5f,+.5f,0, +.0f,+.0f,2, -.5f,+.5f,0, +.5f,+.5f,0, }; @Override public void run() { } private float[] arenaWalls = new float[] { 8.00f,2.00f,1f,2f,2f,1f,2.00f,8.00f,1f,8.00f,2.00f,1f,2.00f,8.00f,1f,8.00f,8.00f,1f, 2.00f,8.00f,1f,2f,2f,1f,0.00f,0.00f,0f,2.00f,8.00f,1f,0.00f,0.00f,0f,0.00f,10.00f,0f, 8.00f,8.00f,1f,2.00f,8.00f,1f,0.00f,10.00f,0f,8.00f,8.00f,1f,0.00f,10.00f,0f,10.00f,10.00f,0f, 2f,2f,1f,8.00f,2.00f,1f,10.00f,0.00f,0f,2f,2f,1f,10.00f,0.00f,0f,0.00f,0.00f,0f, 8.00f,2.00f,1f,8.00f,8.00f,1f,10.00f,10.00f,0f,8.00f,2.00f,1f,10.00f,10.00f,0f,10.00f,0.00f,0f, 10.00f,10.00f,0f,0.00f,10.00f,0f,0.00f,0.00f,0f,10.00f,10.00f,0f,0.00f,0.00f,0f,10.00f,0.00f,0f, 8.00f,6.00f,1f,8.00f,4.00f,1f,122f,4.00f,1f,8.00f,6.00f,1f,122f,4.00f,1f,122f,6.00f,1f, 8.00f,6.00f,1f,122f,6.00f,1f,120f,7.00f,0f,8.00f,6.00f,1f,120f,7.00f,0f,10.00f,7.00f,0f, 122f,4.00f,1f,8.00f,4.00f,1f,10.00f,3.00f,0f,122f,4.00f,1f,10.00f,3.00f,0f,120f,3.00f,0f, 480f,10.00f,0f,470f,10.00f,0f,470f,0.00f,0f,480f,10.00f,0f,470f,0.00f,0f,480f,0.00f,0f, 478f,2.00f,1f,478f,8.00f,1f,480f,10.00f,0f,478f,2.00f,1f,480f,10.00f,0f,480f,0.00f,0f, 472f,2f,1f,478f,2.00f,1f,480f,0.00f,0f,472f,2f,1f,480f,0.00f,0f,470f,0.00f,0f, 478f,8.00f,1f,472f,8.00f,1f,470f,10.00f,0f,478f,8.00f,1f,470f,10.00f,0f,480f,10.00f,0f, 472f,8.00f,1f,472f,2f,1f,470f,0.00f,0f,472f,8.00f,1f,470f,0.00f,0f,470f,10.00f,0f, 478f,2.00f,1f,472f,2f,1f,472f,8.00f,1f,478f,2.00f,1f,472f,8.00f,1f,478f,8.00f,1f, 478f,846f,1f,472f,846f,1f,472f,852f,1f,478f,846f,1f,472f,852f,1f,478f,852f,1f, 472f,852f,1f,472f,846f,1f,470f,844f,0f,472f,852f,1f,470f,844f,0f,470f,854f,0f, 478f,852f,1f,472f,852f,1f,470f,854f,0f,478f,852f,1f,470f,854f,0f,480f,854f,0f, 472f,846f,1f,478f,846f,1f,480f,844f,0f,472f,846f,1f,480f,844f,0f,470f,844f,0f, 478f,846f,1f,478f,852f,1f,480f,854f,0f,478f,846f,1f,480f,854f,0f,480f,844f,0f, 480f,854f,0f,470f,854f,0f,470f,844f,0f,480f,854f,0f,470f,844f,0f,480f,844f,0f, 10.00f,854f,0f,0.00f,854f,0f,0.00f,844f,0f,10.00f,854f,0f,0.00f,844f,0f,10.00f,844f,0f, 8.00f,846f,1f,8.00f,852f,1f,10.00f,854f,0f,8.00f,846f,1f,10.00f,854f,0f,10.00f,844f,0f, 2f,846f,1f,8.00f,846f,1f,10.00f,844f,0f,2f,846f,1f,10.00f,844f,0f,0.00f,844f,0f, 8.00f,852f,1f,2.00f,852f,1f,0.00f,854f,0f,8.00f,852f,1f,0.00f,854f,0f,10.00f,854f,0f, 2.00f,852f,1f,2f,846f,1f,0.00f,844f,0f,2.00f,852f,1f,0.00f,844f,0f,0.00f,854f,0f, 8.00f,846f,1f,2f,846f,1f,2.00f,852f,1f,8.00f,846f,1f,2.00f,852f,1f,8.00f,852f,1f, 6f,846f,1f,4f,846f,1f,4f,8f,1f,6f,846f,1f,4f,8f,1f,6f,8f,1f, 6f,846f,1f,6f,8f,1f,7f,10f,0f,6f,846f,1f,7f,10f,0f,7f,844f,0f, 4f,8f,1f,4f,846f,1f,3f,844f,0f,4f,8f,1f,3f,844f,0f,3f,10f,0f, 474f,8f,1f,474f,846f,1f,473f,844f,0f,474f,8f,1f,473f,844f,0f,473f,10f,0f, 476f,846f,1f,476f,8f,1f,477f,10f,0f,476f,846f,1f,477f,10f,0f,477f,844f,0f, 476f,846f,1f,474f,846f,1f,474f,8f,1f,476f,846f,1f,474f,8f,1f,476f,8f,1f, 130f,10.00f,0f,120f,10.00f,0f,120f,0.00f,0f,130f,10.00f,0f,120f,0.00f,0f,130f,0.00f,0f, 128f,2.00f,1f,128f,8.00f,1f,130f,10.00f,0f,128f,2.00f,1f,130f,10.00f,0f,130f,0.00f,0f, 122f,2f,1f,128f,2.00f,1f,130f,0.00f,0f,122f,2f,1f,130f,0.00f,0f,120f,0.00f,0f, 128f,8.00f,1f,122f,8.00f,1f,120f,10.00f,0f,128f,8.00f,1f,120f,10.00f,0f,130f,10.00f,0f, 122f,8.00f,1f,122f,2f,1f,120f,0.00f,0f,122f,8.00f,1f,120f,0.00f,0f,120f,10.00f,0f, 128f,2.00f,1f,122f,2f,1f,122f,8.00f,1f,128f,2.00f,1f,122f,8.00f,1f,128f,8.00f,1f, 352f,8.00f,1f,358f,8.00f,1f,358f,2.00f,1f,352f,8.00f,1f,358f,2.00f,1f,352f,2.00f,1f, 358f,2.00f,1f,358f,8.00f,1f,360f,10.00f,0f,358f,2.00f,1f,360f,10.00f,0f,360f,0.00f,0f, 352f,2.00f,1f,358f,2.00f,1f,360f,0.00f,0f,352f,2.00f,1f,360f,0.00f,0f,350f,0.00f,0f, 358f,8.00f,1f,352f,8.00f,1f,350f,10.00f,0f,358f,8.00f,1f,350f,10.00f,0f,360f,10.00f,0f, 352f,8.00f,1f,352f,2.00f,1f,350f,0.00f,0f,352f,8.00f,1f,350f,0.00f,0f,350f,10.00f,0f, 350f,0.00f,0f,360f,0.00f,0f,360f,10.00f,0f,350f,0.00f,0f,360f,10.00f,0f,350f,10.00f,0f, 358f,6.00f,1f,472f,6.00f,1f,470f,7.00f,0f,358f,6.00f,1f,470f,7.00f,0f,360f,7.00f,0f, 472f,4.00f,1f,358f,4.00f,1f,360f,3.00f,0f,472f,4.00f,1f,360f,3.00f,0f,470f,3.00f,0f, 472f,4.00f,1f,472f,6.00f,1f,358f,6.00f,1f,472f,4.00f,1f,358f,6.00f,1f,358f,4.00f,1f, 472f,848f,1f,472f,850f,1f,358f,850f,1f,472f,848f,1f,358f,850f,1f,358f,848f,1f, 472f,848f,1f,358f,848f,1f,360f,847f,0f,472f,848f,1f,360f,847f,0f,470f,847f,0f, 358f,850f,1f,472f,850f,1f,470f,851f,0f,358f,850f,1f,470f,851f,0f,360f,851f,0f, 350f,844f,0f,360f,844f,0f,360f,854f,0f,350f,844f,0f,360f,854f,0f,350f,854f,0f, 352f,852f,1f,352f,846f,1f,350f,844f,0f,352f,852f,1f,350f,844f,0f,350f,854f,0f, 358f,852f,1f,352f,852f,1f,350f,854f,0f,358f,852f,1f,350f,854f,0f,360f,854f,0f, 352f,846f,1f,358f,846f,1f,360f,844f,0f,352f,846f,1f,360f,844f,0f,350f,844f,0f, 358f,846f,1f,358f,852f,1f,360f,854f,0f,358f,846f,1f,360f,854f,0f,360f,844f,0f, 352f,852f,1f,358f,852f,1f,358f,846f,1f,352f,852f,1f,358f,846f,1f,352f,846f,1f, 128f,846f,1f,122f,846f,1f,122f,852f,1f,128f,846f,1f,122f,852f,1f,128f,852f,1f, 122f,852f,1f,122f,846f,1f,120f,844f,0f,122f,852f,1f,120f,844f,0f,120f,854f,0f, 128f,852f,1f,122f,852f,1f,120f,854f,0f,128f,852f,1f,120f,854f,0f,130f,854f,0f, 122f,846f,1f,128f,846f,1f,130f,844f,0f,122f,846f,1f,130f,844f,0f,120f,844f,0f, 128f,846f,1f,128f,852f,1f,130f,854f,0f,128f,846f,1f,130f,854f,0f,130f,844f,0f, 130f,854f,0f,120f,854f,0f,120f,844f,0f,130f,854f,0f,120f,844f,0f,130f,844f,0f, 122f,848f,1f,8f,848f,1f,10f,847f,0f,122f,848f,1f,10f,847f,0f,120f,847f,0f, 8f,850f,1f,122f,850f,1f,120f,851f,0f,8f,850f,1f,120f,851f,0f,10f,851f,0f, 8f,850f,1f,8f,848f,1f,122f,848f,1f,8f,850f,1f,122f,848f,1f,122f,850f,1f, 10f,847f,0f,120f,847f,0f,124.96f,829.63f,-0.50f,10f,847f,0f,124.96f,829.63f,-0.50f,19.51f,829.63f,-0.50f, 130f,844f,0f,130f,854f,0f,134.55f,836.34f,-0.50f,130f,844f,0f,134.55f,836.34f,-0.50f,134.55f,826.76f,-0.50f, 350f,844f,0f,350f,854f,0f,345.45f,836.34f,-0.50f,350f,844f,0f,345.45f,836.34f,-0.50f,345.45f,826.76f,-0.50f, 360f,847f,0f,470f,847f,0f,460.49f,829.63f,-0.50f,360f,847f,0f,460.49f,829.63f,-0.50f,355.04f,829.63f,-0.50f, 470f,7.00f,0f,360f,7.00f,0f,355.04f,24.37f,-0.50f,470f,7.00f,0f,355.04f,24.37f,-0.50f,460.49f,24.37f,-0.50f, 350f,10.00f,0f,350f,0.00f,0f,345.45f,17.66f,-0.50f,350f,10.00f,0f,345.45f,17.66f,-0.50f,345.45f,27.24f,-0.50f, 130f,10.00f,0f,130f,0.00f,0f,134.55f,17.66f,-0.50f,130f,10.00f,0f,134.55f,17.66f,-0.50f,134.55f,27.24f,-0.50f, 473f,844f,0f,473f,10f,0f,463.36f,27.24f,-0.50f,473f,844f,0f,463.36f,27.24f,-0.50f,463.36f,826.76f,-0.50f, 7f,10f,0f,7f,844f,0f,16.64f,826.76f,-0.50f,7f,10f,0f,16.64f,826.76f,-0.50f,16.64f,27.24f,-0.50f, 120f,7.00f,0f,10.00f,7.00f,0f,19.51f,24.37f,-0.50f,120f,7.00f,0f,19.51f,24.37f,-0.50f,124.96f,24.37f,-0.50f, 120f,7.00f,0f,130f,10.00f,0f,134.55f,27.24f,-0.50f,120f,7.00f,0f,134.55f,27.24f,-0.50f,124.96f,24.37f,-0.50f, 10.00f,7.00f,0f,7f,10f,0f,16.64f,27.24f,-0.50f,10.00f,7.00f,0f,16.64f,27.24f,-0.50f,19.51f,24.37f,-0.50f, 350f,10.00f,0f,360f,7.00f,0f,355.04f,24.37f,-0.50f,350f,10.00f,0f,355.04f,24.37f,-0.50f,345.45f,27.24f,-0.50f, 473f,10f,0f,470f,7.00f,0f,460.49f,24.37f,-0.50f,473f,10f,0f,460.49f,24.37f,-0.50f,463.36f,27.24f,-0.50f, 473f,844f,0f,470f,847f,0f,460.49f,829.63f,-0.50f,473f,844f,0f,460.49f,829.63f,-0.50f,463.36f,826.76f,-0.50f, 360f,847f,0f,350f,844f,0f,345.45f,826.76f,-0.50f,360f,847f,0f,345.45f,826.76f,-0.50f,355.04f,829.63f,-0.50f, 130f,844f,0f,120f,847f,0f,124.96f,829.63f,-0.50f,130f,844f,0f,124.96f,829.63f,-0.50f,134.55f,826.76f,-0.50f, 7f,844f,0f,10f,847f,0f,19.51f,829.63f,-0.50f,7f,844f,0f,19.51f,829.63f,-0.50f,16.64f,826.76f,-0.50f, 19.51f,829.63f,-0.50f,124.96f,829.63f,-0.50f,136.47f,789.37f,-2f,19.51f,829.63f,-0.50f,136.47f,789.37f,-2f,41.56f,789.37f,-2f, 134.55f,826.76f,-0.50f,134.55f,836.34f,-0.50f,145.09f,795.41f,-2f,134.55f,826.76f,-0.50f,145.09f,795.41f,-2f,145.09f,786.78f,-2f, 345.45f,826.76f,-0.50f,345.45f,836.34f,-0.50f,334.91f,795.41f,-2f,345.45f,826.76f,-0.50f,334.91f,795.41f,-2f,334.91f,786.78f,-2f, 355.04f,829.63f,-0.50f,460.49f,829.63f,-0.50f,438.44f,789.37f,-2f,355.04f,829.63f,-0.50f,438.44f,789.37f,-2f,343.53f,789.37f,-2f, 460.49f,24.37f,-0.50f,355.04f,24.37f,-0.50f,343.53f,64.63f,-2f,460.49f,24.37f,-0.50f,343.53f,64.63f,-2f,438.44f,64.63f,-2f, 345.45f,27.24f,-0.50f,345.45f,17.66f,-0.50f,334.91f,58.59f,-2f,345.45f,27.24f,-0.50f,334.91f,58.59f,-2f,334.91f,67.22f,-2f, 134.55f,27.24f,-0.50f,134.55f,17.66f,-0.50f,145.09f,58.59f,-2f,134.55f,27.24f,-0.50f,145.09f,58.59f,-2f,145.09f,67.22f,-2f, 463.36f,826.76f,-0.50f,463.36f,27.24f,-0.50f,441.03f,67.22f,-2f,463.36f,826.76f,-0.50f,441.03f,67.22f,-2f,441.03f,786.78f,-2f, 16.64f,27.24f,-0.50f,16.64f,826.76f,-0.50f,38.97f,786.78f,-2f,16.64f,27.24f,-0.50f,38.97f,786.78f,-2f,38.97f,67.22f,-2f, 124.96f,24.37f,-0.50f,19.51f,24.37f,-0.50f,41.56f,64.63f,-2f,124.96f,24.37f,-0.50f,41.56f,64.63f,-2f,136.47f,64.63f,-2f, 124.96f,24.37f,-0.50f,134.55f,27.24f,-0.50f,145.09f,67.22f,-2f,124.96f,24.37f,-0.50f,145.09f,67.22f,-2f,136.47f,64.63f,-2f, 19.51f,24.37f,-0.50f,16.64f,27.24f,-0.50f,38.97f,67.22f,-2f,19.51f,24.37f,-0.50f,38.97f,67.22f,-2f,41.56f,64.63f,-2f, 345.45f,27.24f,-0.50f,355.04f,24.37f,-0.50f,343.53f,64.63f,-2f,345.45f,27.24f,-0.50f,343.53f,64.63f,-2f,334.91f,67.22f,-2f, 463.36f,27.24f,-0.50f,460.49f,24.37f,-0.50f,438.44f,64.63f,-2f,463.36f,27.24f,-0.50f,438.44f,64.63f,-2f,441.03f,67.22f,-2f, 463.36f,826.76f,-0.50f,460.49f,829.63f,-0.50f,438.44f,789.37f,-2f,463.36f,826.76f,-0.50f,438.44f,789.37f,-2f,441.03f,786.78f,-2f, 355.04f,829.63f,-0.50f,345.45f,826.76f,-0.50f,334.91f,786.78f,-2f,355.04f,829.63f,-0.50f,334.91f,786.78f,-2f,343.53f,789.37f,-2f, 134.55f,826.76f,-0.50f,124.96f,829.63f,-0.50f,136.47f,789.37f,-2f,134.55f,826.76f,-0.50f,136.47f,789.37f,-2f,145.09f,786.78f,-2f, 16.64f,826.76f,-0.50f,19.51f,829.63f,-0.50f,41.56f,789.37f,-2f,16.64f,826.76f,-0.50f,41.56f,789.37f,-2f,38.97f,786.78f,-2f, }; private float[] backgroundData = new float[] { // # ,Scale, Speed, 300 , 1.05f, .001f, 150 , 1.07f, .002f, 075 , 1.10f, .003f, 040 , 1.12f, .006f, 20 , 1.15f, .012f, 10 , 1.25f, .025f, 05 , 1.50f, .050f, 3 , 2.00f, .100f, 2 , 3.00f, .200f, }; private float[] triangleCoords = new float[] { 0, -25, 0, -.75f, -1, 0, +.75f, -1, 0, 0, +2, 0, -.99f, -1, 0, .99f, -1, 0, }; private float[] triangleColors = new float[] { 1.0f, 1.0f, 1.0f, 0.05f, 1.0f, 1.0f, 1.0f, 0.5f, 1.0f, 1.0f, 1.0f, 0.5f, 1.0f, 1.0f, 1.0f, 1.0f, 1.0f, 1.0f, 1.0f, 0.5f, 1.0f, 1.0f, 1.0f, 0.5f, }; private float[] drawArray2; private FloatBuffer drawBuffer2; private float[] colorArray2; private static FloatBuffer colorBuffer; private static FloatBuffer triangleBuffer; private static FloatBuffer quadBuffer; private static FloatBuffer drawBuffer; private float[] backgroundVerts; private FloatBuffer backgroundVertsWrapped; private float[] backgroundColors; private Buffer backgroundColorsWraped; private FloatBuffer backgroundColorsWrapped; private FloatBuffer arenaWallsWrapped; private FloatBuffer arenaColorsWrapped; private FloatBuffer arena2VertsWrapped; private FloatBuffer arena2ColorsWrapped; private long wallHitStartTime; private int wallHitDrawTime; private FloatBuffer pixelVertsWrapped; private float[] wallHit; private FloatBuffer pixelColorsWrapped; //private float[] pitVerts; private Resources lResources; private FloatBuffer pitVertsWrapped; private FloatBuffer pitColorsWrapped; private boolean arena2; private long lastStartTime; private long startTime; private int state=1; private long introEndTime; protected long introTotalTime =8000; protected long introStartTime; private boolean initDone= false; private static int stateIntro = 0; private static int stateGame = 1; public GlRenderer(spacehockey nspacehockey) { lResources = nspacehockey.getResources(); nspacehockey.SetHandlerToGLRenderer(new Handler() { @Override public void handleMessage(Message m) { if (m.what ==0){ wallHit = m.getData().getFloatArray("wall hit"); wallHitStartTime =System.currentTimeMillis(); wallHitDrawTime = 1000; }else if (m.what ==1){ //state = stateIntro; introEndTime= System.currentTimeMillis()+introTotalTime ; introStartTime = System.currentTimeMillis(); } }}); } public void onSurfaceCreated(GL10 gl, EGLConfig config) { gl.glShadeModel(GL10.GL_SMOOTH); gl.glClearColor(.01f, .01f, .01f, .1f); gl.glClearDepthf(1.0f); gl.glEnable(GL10.GL_DEPTH_TEST); gl.glDepthFunc(GL10.GL_LEQUAL); gl.glHint(GL10.GL_PERSPECTIVE_CORRECTION_HINT, GL10.GL_NICEST); } private float SumOfStrideI(float[] data, int offset, int stride) { int sum= 0; for (int i=offset;i<data.length-1;i=i+stride){ sum = (int) (data[i]+sum); } return sum; } public void onDrawFrame(GL10 gl) { if (state== stateIntro){DrawIntro(gl);} if (state== stateGame){DrawGame(gl);} } private void DrawIntro(GL10 gl) { startTime = System.currentTimeMillis(); if (startTime< introEndTime){ float ptd = (float)(startTime- introStartTime)/(float)introTotalTime; float ptl = 1-ptd; gl.glClear(GL10.GL_COLOR_BUFFER_BIT);//dont move gl.glMatrixMode(GL10.GL_MODELVIEW); int setVertOff = 0; gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_COLOR_ARRAY); gl.glColorPointer(4, GL10.GL_FLOAT, 0, backgroundColorsWrapped); for (int i = 0; i < backgroundData.length / 3; i = i + 1) { int setoff = i * 3; int setVertLen = (int) backgroundData[setoff]; yoffs[i] = (backgroundData[setoff + 2]*(90+(ptl*250))) + yoffs[i]; if (yoffs[i] > Height) {yoffs[i] = 0;} gl.glPushMatrix(); //gl.glTranslatef(0, -(Height/2), 0); //gl.glScalef(1f, 1f+(ptl*2), 1f); //gl.glTranslatef(0, +(Height/2), 0); gl.glTranslatef(0, yoffs[i], i+60); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, backgroundVertsWrapped); gl.glDrawArrays(GL10.GL_TRIANGLES, (setVertOff * 2 * 3) - 0, (setVertLen * 2 * 3) - 1); gl.glTranslatef(0, -Height, 0); gl.glDrawArrays(GL10.GL_TRIANGLES, (setVertOff * 2 * 3) - 0, (setVertLen * 2 * 3) - 1); setVertOff = (int) (setVertOff + setVertLen); gl.glPopMatrix(); } gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_COLOR_ARRAY); }else{state = stateGame;} } private void DrawGame(GL10 gl) { lastStartTime = startTime; startTime = System.currentTimeMillis(); long moveTime = startTime-lastStartTime; gl.glClear(GL10.GL_COLOR_BUFFER_BIT);//dont move gl.glMatrixMode(GL10.GL_MODELVIEW); int setVertOff = 0; gl.glEnableClientState(GL10.GL_VERTEX_ARRAY); gl.glEnableClientState(GL10.GL_COLOR_ARRAY); gl.glColorPointer(4, GL10.GL_FLOAT, 0, backgroundColorsWrapped); for (int i = 0; i < backgroundData.length / 3; i = i + 1) { int setoff = i * 3; int setVertLen = (int) backgroundData[setoff]; yoffs[i] = (backgroundData[setoff + 2]*moveTime) + yoffs[i]; if (yoffs[i] > Height) {yoffs[i] = 0;} gl.glPushMatrix(); gl.glTranslatef(0, yoffs[i], i+60); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, backgroundVertsWrapped); gl.glDrawArrays(GL10.GL_TRIANGLES, (setVertOff * 6) - 0, (setVertLen *6) - 1); gl.glTranslatef(0, -Height, 0); gl.glDrawArrays(GL10.GL_TRIANGLES, (setVertOff * 6) - 0, (setVertLen *6) - 1); setVertOff = (int) (setVertOff + setVertLen); gl.glPopMatrix(); } //arena frame gl.glPushMatrix(); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, arenaWallsWrapped); gl.glColorPointer(4, GL10.GL_FLOAT, 0, arenaColorsWrapped); gl.glColor4f(.1f, .5f, 1f, 1f); gl.glTranslatef(0, 0, 50); gl.glDrawArrays(GL10.GL_TRIANGLES, 0, (int)(arenaWalls.length / 3)); gl.glPopMatrix(); //arena2 frame if (arena2 == true){ gl.glLoadIdentity(); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, pitVertsWrapped); gl.glColorPointer(4, GL10.GL_FLOAT, 0, pitColorsWrapped); gl.glTranslatef(0, -Height, 40); gl.glDrawArrays(GL10.GL_TRIANGLES, 0, (int)(pitVertsWrapped.capacity() / 3)); } if (wallHitStartTime != 0) { float timeRemaining = (wallHitStartTime + wallHitDrawTime)-System.currentTimeMillis(); if (timeRemaining>0) { gl.glPushMatrix(); float percentDone = 1-(timeRemaining/wallHitDrawTime); gl.glLoadIdentity(); gl.glVertexPointer(3, GL10.GL_FLOAT, 0, pixelVertsWrapped); gl.glColorPointer(4, GL10.GL_FLOAT, 0, pixelColorsWrapped); gl.glTranslatef(wallHit[0], wallHit[1], 0); gl.glScalef(8, Height*percentDone, 0); gl.glDrawArrays(GL10.GL_TRIANGLES, 0, 12); gl.glPopMatrix(); } else { wallHitStartTime = 0; } } gl.glDisableClientState(GL10.GL_VERTEX_ARRAY); gl.glDisableClientState(GL10.GL_COLOR_ARRAY); } public void init(GL10 gl) { if (arena2 == true) { AssetManager assetManager = lResources.getAssets(); try { // byte[] ba = {111,111}; DataInputStream Dis = new DataInputStream(assetManager .open("arena2.ogl")); pitVertsWrapped = LoadFloatArray.FromDataInputStream(Dis); pitColorsWrapped = MakeFakeLighting(pitVertsWrapped.array(), .25f, .50f, 1f, 200, .5f); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } } if ((Height != 854) || (Width != 480)) { arenaWalls = ScaleFloats(arenaWalls, Width / 480f, Height / 854f); } arenaWallsWrapped = FloatBuffer.wrap(arenaWalls); arenaColorsWrapped = MakeFakeLighting(arenaWalls, .03f, .16f, .33f, .33f, 3); pixelVertsWrapped = FloatBuffer.wrap(pixelVerts); pixelColorsWrapped = MakeFakeLighting(pixelVerts, .03f, .16f, .33f, .10f, 20); initDone=true; } public void onSurfaceChanged(GL10 gl, int nwidth, int nheight) { Width= nwidth; Height = nheight; // avoid division by zero if (Height == 0) Height = 1; // draw on the entire screen gl.glViewport(0, 0, Width, Height); // setup projection matrix gl.glMatrixMode(GL10.GL_PROJECTION); gl.glLoadIdentity(); gl.glOrthof(0, Width, Height, 0, 100, -100); // gl.glOrthof(-nwidth*2, nwidth*2, nheight*2,-nheight*2, 100, -100); // GLU.gluPerspective(gl, 180.0f, (float)nwidth / (float)nheight, // 1000.0f, -1000.0f); gl.glEnable(GL10.GL_BLEND); gl.glBlendFunc(GL10.GL_SRC_ALPHA, GL10.GL_ONE_MINUS_SRC_ALPHA); System.gc(); if (initDone == false){ SetupStars(); init(gl); } } public void SetupStars(){ backgroundVerts = new float[(int) SumOfStrideI(backgroundData,0,3)*triangleCoords.length]; backgroundColors = new float[(int) SumOfStrideI(backgroundData,0,3)*triangleColors.length]; int iii=0; int vc=0; float ascale=1; for (int i=0;i<backgroundColors.length-1;i=i+1){ if (iii==0){ascale = (float) Math.random();} if (vc==3){ backgroundColors[i]= (float) (triangleColors[iii]*(ascale)); }else if(vc==2){ backgroundColors[i]= (float) (triangleColors[iii]-(Math.random()*.2)); }else{ backgroundColors[i]= (float) (triangleColors[iii]-(Math.random()*.3)); } iii=iii+1;if (iii> triangleColors.length-1){iii=0;} vc=vc+1; if (vc>3){vc=0;} } int ii=0; int i =0; int set =0; while(ii<backgroundVerts.length-1){ float scale = (float) backgroundData[(set*3)+1]; int length= (int) backgroundData[(set*3)]; for (i=0;i<length;i=i+1){ if (set ==0){ AddVertsToArray(ScaleFloats(triangleCoords, scale,scale*.25f), backgroundVerts, (float)(Math.random()*Width),(float) (Math.random()*Height), ii); }else{ AddVertsToArray(ScaleFloats(triangleCoords, scale), backgroundVerts, (float)(Math.random()*Width),(float) (Math.random()*Height), ii);} ii=ii+triangleCoords.length; } set=set+1; } backgroundVertsWrapped = FloatBuffer.wrap(backgroundVerts); backgroundColorsWrapped = FloatBuffer.wrap(backgroundColors); } public void AddVertsToArray(float[] sva,float[]dva,float ox,float oy,int start){ //x for (int i=0;i<sva.length;i=i+3){ if((start+i)<dva.length){dva[start+i]= sva[i]+ox;} } //y for (int i=1;i<sva.length;i=i+3){ if((start+i)<dva.length){dva[start+i]= sva[i]+oy;} } //z for (int i=2;i<sva.length;i=i+3){ if((start+i)<dva.length){dva[start+i]= sva[i];} } } public FloatBuffer MakeFakeLighting(float[] sa,float r, float g,float b,float a,float multby){ float[] da = new float[((sa.length/3)*4)]; int vertex=0; for (int i=0;i<sa.length;i=i+3){ if (sa[i+2]>=1){ da[(vertex*4)+0]= r*multby*sa[i+2]; da[(vertex*4)+1]= g*multby*sa[i+2]; da[(vertex*4)+2]= b*multby*sa[i+2]; da[(vertex*4)+3]= a*multby*sa[i+2]; }else if (sa[i+2]<=-1){ float divisor = (multby*(-sa[i+2])); da[(vertex*4)+0]= r / divisor; da[(vertex*4)+1]= g / divisor; da[(vertex*4)+2]= b / divisor; da[(vertex*4)+3]= a / divisor; }else{ da[(vertex*4)+0]= r; da[(vertex*4)+1]= g; da[(vertex*4)+2]= b; da[(vertex*4)+3]= a; } vertex = vertex+1; } return FloatBuffer.wrap(da); } public float[] ScaleFloats(float[] va,float s){ float[] reta= new float[va.length]; for (int i=0;i<va.length;i=i+1){ reta[i]=va[i]*s; } return reta; } public float[] ScaleFloats(float[] va,float sx,float sy){ float[] reta= new float[va.length]; int cnt = 0; for (int i=0;i<va.length;i=i+1){ if (cnt==0){reta[i]=va[i]*sx;} else if (cnt==1){reta[i]=va[i]*sy;} else if (cnt==2){reta[i]=va[i];} cnt = cnt +1;if (cnt>2){cnt=0;} } return reta; } }

  Read the article

• F# and the rose-tinted reflection

  - by CliveT

  We're already seeing increasing use of many cores on client desktops. It is a change that has been long predicted. It is not just a change in architecture, but our notions of efficiency in a program. No longer can we focus on the asymptotic complexity of an algorithm by counting the steps that a single core processor would take to execute it. Instead we'll soon be more concerned about the scalability of the algorithm and how well we can increase the performance as we increase the number of cores. This may even lead us to throw away our most efficient algorithms, and switch to less efficient algorithms that scale better. We might even be willing to waste cycles in order to speculatively execute at the algorithm rather than the hardware level. State is the big headache in this parallel world. At the hardware level, main memory doesn't necessarily contain the definitive value corresponding to a particular address. An update to a location might still be held in a CPU's local cache and it might be some time before the value gets propagated. To get the latest value, and the notion of "latest" takes a lot of defining in this world of rapidly mutating state, the CPUs may well need to communicate to decide who has the definitive value of a particular address in order to avoid lost updates. At the user program level, this means programmers will need to lock objects before modifying them, or attempt to avoid the overhead of locking by understanding the memory models at a very deep level. I think it's this need to avoid statefulness that has led to the recent resurgence of interest in functional languages. In the 1980s, functional languages started getting traction when research was carried out into how programs in such languages could be auto-parallelised. Sadly, the impracticality of some of the languages, the overheads of communication during this parallel execution, and rapid improvements in compiler technology on stock hardware meant that the functional languages fell by the wayside. The one thing that these languages were good at was getting rid of implicit state, and this single idea seems like a solution to the problems we are going to face in the coming years. Whether these languages will catch on is hard to predict. The mindset for writing a program in a functional language is really very different from the way that object-oriented problem decomposition happens - one has to focus on the verbs instead of the nouns, which takes some getting used to. There are a number of hybrid functional/object languages that have been becoming more popular in recent times. These half-way houses make it easy to use functional ideas for some parts of the program while still allowing access to the underlying object-focused platform without a great deal of impedance mismatch. One example is F# running on the CLR which, in Visual Studio 2010, has because a first class member of the pack. Inside Visual Studio 2010, the tooling for F# has improved to the point where it is easy to set breakpoints and watch values change while debugging at the source level. In my opinion, it is the tooling support that will enable the widespread adoption of functional languages - without this support, people will put off any transition into the functional world for as long as they possibly can. Without tool support it will make it hard to learn these languages. One tool that doesn't currently support F# is Reflector. The idea of decompiling IL to a functional language is daunting, but F# is potentially so important I couldn't dismiss the idea. As I'm currently developing Reflector 6.5, I thought it wise to take four days just to see how far I could get in doing so, even if it achieved little more than to be clearer on how much was possible, and how long it might take. You can read what happened here, and of the insights it gave us on ways to improve the tool.

  Read the article

• Simple task framework - building software from reusable pieces

  - by RuslanD

  I'm writing a web service with several APIs, and they will be sharing some of the implementation code. In order not to copy-paste, I would like to ideally implement each API call as a series of tasks, which are executed in a sequence determined by the business logic. One obvious question is whether that's the best strategy for code reuse, or whether I can look at it in a different way. But assuming I want to go with tasks, several issues arise: What's a good task interface to use? How do I pass data computed in one task to another task in the sequence that might need it? In the past, I've worked with task interfaces like: interface Task<T, U> { U execute(T input); } Then I also had sort of a "task context" object which had getters and setters for any kind of data my tasks needed to produce or consume, and it gets passed to all tasks. I'm aware that this suffers from a host of problems. So I wanted to figure out a better way to implement it this time around. My current idea is to have a TaskContext object which is a type-safe heterogeneous container (as described in Effective Java). Each task can ask for an item from this container (task input), or add an item to the container (task output). That way, tasks don't need to know about each other directly, and I don't have to write a class with dozens of methods for each data item. There are, however, several drawbacks: Each item in this TaskContext container should be a complex type that wraps around the actual item data. If task A uses a String for some purpose, and task B uses a String for something entirely different, then just storing a mapping between String.class and some object doesn't work for both tasks. The other reason is that I can't use that kind of container for generic collections directly, so they need to be wrapped in another object. This means that, based on how many tasks I define, I would need to also define a number of classes for the task items that may be consumed or produced, which may lead to code bloat and duplication. For instance, if a task takes some Long value as input and produces another Long value as output, I would have to have two classes that simply wrap around a Long, which IMO can spiral out of control pretty quickly as the codebase evolves. I briefly looked at workflow engine libraries, but they kind of seem like a heavy hammer for this particular nail. How would you go about writing a simple task framework with the following requirements: Tasks should be as self-contained as possible, so they can be composed in different ways to create different workflows. That being said, some tasks may perform expensive computations that are prerequisites for other tasks. We want to have a way of storing the results of intermediate computations done by tasks so that other tasks can use those results for free. The task framework should be light, i.e. growing the code doesn't involve introducing many new types just to plug into the framework.

  Read the article

• Access Denied

  - by Tony Davis

  When Microsoft executives wake up in the night screaming, I suspect they are having a nightmare about their own version of Frankenstein's monster. Created with the best of intentions, without thinking too hard of the long-term strategy, and having long outlived its usefulness, the monster still lives on, occasionally wreaking vengeance on the innocent. Its name is Access; a living synthesis of disparate body parts that is resistant to all attempts at a mercy-killing. In 1986, Microsoft had no database products, and needed one for their new OS/2 operating system, the successor to MSDOS. In 1986, they bought exclusive rights to Sybase DataServer, and were also intent on developing a desktop database to capture Ashton-Tate's dominance of that market, with dbase. This project, first called 'Omega' and later 'Cirrus', eventually spawned two products: Visual Basic in 1991 and Access in late 1992. Whereas Visual Basic battled with PowerBuilder for dominance in the client-server market, Access easily won the desktop database battle, with Dbase III and DataEase falling away. Access did an excellent job of abstracting and simplifying the task of building small database applications in a short amount of time, for a small number of departmental users, and often for a transient requirement. There is an excellent front end and forms generator. We not only see it in Access but parts of it also reappear in SSMS. It's good. A business user can pull together useful reports, without relying on extensive technical support. A skilled Access programmer can deliver a fairly sophisticated application, whilst the traditional client-server programmer is still sharpening his pencil. Even for the SQL Server programmer, the forms generator of Access is useful for sketching out application designs. So far, so good, but here's where the problems start; Access ties together two different products and the backend of Access is the bugbear. The limitations of Jet/ACE are well-known and documented. They range from MDB files that are prone to corruption, especially as they grow in size, pathetic security, and "copy and paste" Backups. The biggest problem though, was an infamous lack of scalability. Because Microsoft never realized how long the product would last, they put little energy into improving the beast. Microsoft 'ate their own dog food' by using Access for Microsoft Exchange and Outlook. They choked on it. For years, scalability and performance problems with Exchange Server have been laid at the door of the Jet Blue engine on which it relies. Substantial development work in Exchange 2010 was required, just in order to improve the engine and storage schema so that it more efficiently handled the reading and writing of mails. The alternative of using SQL Server just never panned out. The Jet engine was designed to limit concurrent users to a small number (10-20). When Access applications outgrew this, bitter experience proved that there really is no easy upgrade path from Access to SQL Server, beyond rewriting the whole lot from scratch. The various initiatives to do this never quite bridged the cultural gulf between Access and a true relational database So, what are the obvious alternatives for small, strategic database applications? I know many users who, for simple 'list maintenance' requirements are very happy using Excel databases. Surely, now that PowerPivot has led the way, it is time for Microsoft to offer a new RAD package for database application development; namely an Excel-based front end for SQL Server Express. In that way, we'll have a powerful and familiar front end, to a scalable database, and a clear upgrade path when an app takes off and needs to go enterprise. Cheers, Tony.

  Read the article

• Recent improvements in Console Performance

  - by loren.konkus

  Recently, the WebLogic Server development and support organizations have worked with a number of customers to quantify and improve the performance of the Administration Console in large, distributed configurations where there is significant latency in the communications between the administration server and managed servers. These improvements fall into two categories: Constraining the amount of time that the Console stalls waiting for communication Reducing and streamlining the amount of data required for an update A few releases ago, we added support for a configurable domain-wide mbean "Invocation Timeout" value on the Console's configuration: general, advanced section for a domain. The default value for this setting is 0, which means wait indefinitely and was chosen for compatibility with the behavior of previous releases. This configuration setting applies to all mbean communications between the admin server and managed servers, and is the first line of defense against being blocked by a stalled or completely overloaded managed server. Each site should choose an appropriate timeout value for their environment and network latency. In the next release of WebLogic Server, we've added an additional console preference, "Management Operation Timeout", to the Console's shared preference page. This setting further constrains how long certain console pages will wait for slowly responding servers before returning partial results. While not all Console pages support this yet, key pages such as the Servers Configuration and Control table pages and the Deployments Control pages have been updated to support this. For example, if a user requests a Servers Table page and a Management Operation Timeout occurs, the table is displayed with both local configuration and remote runtime information from the responding managed servers and only local configuration information for servers that did not yet respond. This means that a troublesome managed server does not impede your ability to manage your domain using the Console. To support these changes, these Console pages have been re-written to use the Work Management feature of WebLogic Server to interact with each server or deployment concurrently, which further improves the responsiveness of these pages. The basic algorithm for these pages is: For each configuration mbean (ie, Servers) populate rows with configuration attributes from the fast, local mbean server Find a WorkManager For each server, Create a Work instance to obtain runtime mbean attributes for the server Schedule Work instance in the WorkManager Call WorkManager.waitForAll to wait WorkItems to finish, constrained by Management Operation Timeout For each WorkItem, if the runtime information obtained was not complete, add a message indicating which server has incomplete data Display collected data in table In addition to these changes to constrain how long the console waits for communication, a number of other changes have been made to reduce the amount and scope of managed server interactions for key pages. For example, in previous releases the Deployments Control table looked at the status of a deployment on every managed server, even those servers that the deployment was not currently targeted on. (This was done to handle an edge case where a deployment's target configuration was changed while it remained running on previously targeted servers.) We decided supporting that edge case did not warrant the performance impact for all, and instead only look at the status of a deployment on the servers it is targeted to. Comprehensive status continues to be available if a user clicks on the 'status' field for a deployment. Finally, changes have been made to the System Status portlet to reduce its impact on Console page display times. Obtaining health information for this display requires several mbean interactions with managed servers. In previous releases, this mbean interaction occurred with every display, and any delay or impediment in these interactions was reflected in the display time for every page. To reduce this impact, we've made several changes in this portlet: Using Work Management to obtain health concurrently Applying the operation timeout configuration to constrain how long we will wait Caching health information to reduce the cost during rapid navigation from page to page and only obtaining new health information if the previous information is over 30 seconds old. Eliminating heath collection if this portlet is minimized. Together, these Console changes have resulted in significant performance improvements for the customers with large configurations and high latency that we have worked with during their development, and some lesser performance improvements for those with small configurations and very fast networks. These changes will be included in the 11g Rel 1 patch set 2 (10.3.3.0) release of WebLogic Server.

  Read the article

• JFall 2012

  - by Geertjan

  JFall 2012 was over far too soon! Seven tracks going on simultaneously in a great location, with many artifacts reminding me of JavaOne, and nice snacks and drinks afterwards. The day started, as such things always do, with a keynote. Thanks to @royvanrijn for the photo below, I didn't take any myself and without a picture this report might have been too dry: What you see above is Steve Chin riding into the keynote hall on his NightHacking bike. The keynote was interesting, I can't be too complimentary about it, since I was part of it myself. Bert Ertman introduced the day and then Steve Chin took over, together with Sharat Chander, Tom Eugelink, Timon Veenstra, and myself. We had a strict choreography for the keynote, one that would ensure a lot of variation and some unexpected surprises, such as Steve being thrown off the stage a few times by Bert because of mentioning JavaOne too many times, rather than the clearly much cooler JFall. Steve talked about JavaOne and the direction Java is headed in, Sharat talked about JavaME and embedded devices, Steve and Tom did a demo involving JavaFX, I did a Project Easel demo, and Timon from Ordina talked about his Duke's Choice Award winning AgroSense project. I think the Project Easel demo (which I repeated later in a screencast for Parleys arranged by Eugene Boogaart) came across well and several people I spoke to especially like the roundtrip/bi-directional work that can be done, from browser to IDE and back again, very simply and intuitively. (In a long conversation on the drive back home afterwards, the scenario of a designer laying out the UI in HTML and then handing the HTML to a developer for back-end work, a developer who would then find it convenient to open the HTML in a browser and quickly navigate from the browser to the resources within the IDE, was discussed and considered to be extremely interesting and worth considering adopting NetBeans for, for no other reason than that.) Later I attended a session by David Delabassee on Java EE 7, Hans Dockter on Gradle, and Sander Mak on cross-build injection attacks. I was sorry to have missed Martijn Verburg's session, which sounded like it was really fantastic, among others, such as Gerrit Grunwald. I did a session too, entitled "Unlocking the Java EE 6 Platform", which was very well attended, pretty much a full room, and the demo went very smoothly. I talked to many people, e.g., a long time with Hans Dockter about how cool Gradle is and how great the Gradle/NetBeans plugin is turning out to be. I also had a long conversation (and did a demo) with Chris Chedgey, from Structure101, after his session, which was incredibly well attended; very interesting how popular modularity is. I met several people for the first time, as well as some colleagues from past places I've worked at. All in all, it was a great conference, unfortunately too short, which was very well attended (clearly over 1000) people, with several international speakers, as well as international attendees such as Mattias Karlsson, Sweden JUG leader. And, unsurprisingly, I came across NetBeans Platform applications again, none of which I had ever heard of before. In each case, "our fat client application" was mentioned in passing, never as a main application, and never in a context where there are plans for the application to be migrated to the web or mobile, simply because doing so makes no business sense at all. Great times at JFall, looking forward to meeting with some of the people I met again soon.

  Read the article

• Ask HTG: How Can I Check the Age of My Windows Installation?

  - by Jason Fitzpatrick

  Curious about when you installed Windows and how long you’ve been chugging along without a system refresh? Read on as we show you a simple way to see how long-in-the-tooth your Windows installation is. Dear How-To Geek, It feels like it has been forever since I installed Windows 7 and I’m starting to wonder if some of the performance issues I’m experiencing have something to do with how long ago it was installed. It isn’t crashing or anything horrible, mind you, it just feels slower than it used to and I’m wondering if I should reinstall it to wipe the slate clean. Is there a simple way to determine the original installation date of Windows on its host machine? Sincerely, Worried in Windows Although you only intended to ask one question, you actually asked two. Your direct question is an easy one to answer (how to check the Windows installation date). The indirect question is, however, a little trickier (if you need to reinstall Windows to get a performance boost). Let’s start off with the easy one: how to check your installation date. Windows includes a handy little application just for the purposes of pulling up system information like the installation date, among other things. Open the Start Menu and type cmd in the run box (or, alternatively, press WinKey+R to pull up the run dialog and enter the same command). At the command prompt, type systeminfo.exe Give the application a moment to run; it takes around 15-20 seconds to gather all the data. You’ll most likely need to scroll back up in the console window to find the section at the top that lists operating system stats. What you care about is Original Install Date: We’ve been running the machine we tested the command on since August 23 2009. For the curious, that’s one month and a day after the initial public release of Windows 7 (after we were done playing with early test releases and spent a month mucking around in the guts of Windows 7 to report on features and flaws, we ran a new clean installation and kept on trucking). Now, you might be asking yourself: Why haven’t they reinstalled Windows in all that time? Haven’t things slowed down? Haven’t they upgraded hardware? The truth of the matter is, in most cases there’s no need to completely wipe your computer and start from scratch to resolve issues with Windows and, if you don’t bog your system down with unnecessary and poorly written software, things keep humming along. In fact, we even migrated this machine from a traditional mechanical hard drive to a newer solid-state drive back in 2011. Even though we’ve tested piles of software since then, the machine is still rather clean because 99% of that testing happened in a virtual machine. That’s not just a trick for technology bloggers, either, virtualizing is a handy trick for anyone who wants to run a rock solid base OS and avoid the bog-down-and-then-refresh cycle that can plague a heavily used machine. So while it might be the case that you’ve been running Windows 7 for years and heavy software installation and use has bogged your system down to the point a refresh is in order, we’d strongly suggest reading over the following How-To Geek guides to see if you can’t wrangle the machine into shape without a total wipe (and, if you can’t, at least you’ll be in a better position to keep the refreshed machine light and zippy): HTG Explains: Do You Really Need to Regularly Reinstall Windows? PC Cleaning Apps are a Scam: Here’s Why (and How to Speed Up Your PC) The Best Tips for Speeding Up Your Windows PC Beginner Geek: How to Reinstall Windows on Your Computer Everything You Need to Know About Refreshing and Resetting Your Windows 8 PC Armed with a little knowledge, you too can keep a computer humming along until the next iteration of Windows comes along (and beyond) without the hassle of reinstalling Windows and all your apps.         

  Read the article

• Learn Many Languages

  - by Phil Factor

  Around twenty-five years ago, I was trying to solve the problem of recruiting suitable developers for a large business. I visited the local University (it was a Technical College then). My mission was to remind them that we were a large, local employer of technical people and to suggest that, as they were in the business of educating young people for a career in IT, we should work together. I anticipated a harmonious chat where we could suggest to them the idea of mentioning our name to some of their graduates. It didn’t go well. The academic staff displayed a degree of revulsion towards the whole topic of IT in the world of commerce that surprised me; tweed met charcoal-grey, trainers met black shoes. However, their antipathy to commerce was something we could have worked around, since few of their graduates were destined for a career as university lecturers. They asked me what sort of language skills we needed. I tried ducking the invidious task of naming computer languages, since I wanted recruits who were quick to adapt and learn, with a broad understanding of IT, including development methodologies, technologies, and data. However, they pressed the point and I ended up saying that we needed good working knowledge of C and BASIC, though FORTRAN and COBOL were, at the time, still useful. There was a ghastly silence. It was as if I’d recommended the beliefs and practices of the Bogomils of Bulgaria to a gathering of Cardinals. They stared at me severely, like owls, until the head of department broke the silence, informing me in clipped tones that they taught only Modula 2. Now, I wouldn’t blame you if at this point you hurriedly had to look up ‘Modula 2′ on Wikipedia. Based largely on Pascal, it was a specialist language for embedded systems, but I’ve never ever come across it in a commercial business application. Nevertheless, it was an excellent teaching language since it taught modules, scope control, multiprogramming and the advantages of encapsulating a set of related subprograms and data structures. As long as the course also taught how to transfer these skills to other, more useful languages, it was not necessarily a problem. I said as much, but they gleefully retorted that the biggest local employer, a defense contractor specializing in Radar and military technology, used nothing but Modula 2. “Why teach any other programming language when they will be using Modula 2 for all their working lives?” said a complacent lecturer. On hearing this, I made my excuses and left. There could be no meeting of minds. They were providing training in a specific computer language, not an education in IT. Twenty years later, I once more worked nearby and regularly passed the long-deserted ‘brownfield’ site of the erstwhile largest local employer; the end of the cold war had led to lean times for defense contractors. A digger was about to clear the rubble of the long demolished factory along with the accompanying growth of buddleia and thistles, in order to lay the infrastructure for ‘affordable housing’. Modula 2 was a distant memory. Either those employees had short working lives or they’d retrained in other languages. The University, by contrast, was thriving, but I wondered if their erstwhile graduates had ever cursed the narrow specialization of their training in IT, as they struggled with the unexpected variety of their subsequent careers.

  Read the article

• Feynman's inbox

  - by user12607414

  Here is Richard Feynman writing on the ease of criticizing theories, and the difficulty of forming them: The problem is not just to say something might be wrong, but to replace it by something — and that is not so easy. As soon as any really definite idea is substituted it becomes almost immediately apparent that it does not work. The second difficulty is that there is an infinite number of possibilities of these simple types. It is something like this. You are sitting working very hard, you have worked for a long time trying to open a safe. Then some Joe comes along who knows nothing about what you are doing, except that you are trying to open the safe. He says ‘Why don’t you try the combination 10:20:30?’ Because you are busy, you have tried a lot of things, maybe you have already tried 10:20:30. Maybe you know already that the middle number is 32 not 20. Maybe you know as a matter of fact that it is a five digit combination… So please do not send me any letters trying to tell me how the thing is going to work. I read them — I always read them to make sure that I have not already thought of what is suggested — but it takes too long to answer them, because they are usually in the class ‘try 10:20:30’. (“Seeking New Laws”, page 161 in The Character of Physical Law.) As a sometime designer (and longtime critic) of widely used computer systems, I have seen similar difficulties appear when anyone undertakes to publicly design a piece of software that may be used by many thousands of customers. (I have been on both sides of the fence, of course.) The design possibilities are endless, but the deep design problems are usually hidden beneath a mass of superfluous detail. The sheer numbers can be daunting. Even if only one customer out of a thousand feels a need to express a passionately held idea, it can take a long time to read all the mail. And it is a fact of life that many of those strong suggestions are only weakly supported by reason or evidence. Opinions are plentiful, but substantive research is time-consuming, and hence rare. A related phenomenon commonly seen with software is bike-shedding, where interlocutors focus on surface details like naming and syntax… or (come to think of it) like lock combinations. On the other hand, software is easier than quantum physics, and the population of people able to make substantial suggestions about software systems is several orders of magnitude bigger than Feynman’s circle of colleagues. My own work would be poorer without contributions — sometimes unsolicited, sometimes passionately urged on me — from the open source community. If a Nobel prize winner thought it was worthwhile to read his mail on the faint chance of learning a good idea, I am certainly not going to throw mine away. (In case anyone is still reading this, and is wondering what provoked a meditation on the quality of one’s inbox contents, I’ll simply point out that the volume has been very high, for many months, on the Lambda-Dev mailing list, where the next version of the Java language is being discussed. Bravo to those of my colleagues who are surfing that wave.) I started this note thinking there was an odd parallel between the life of the physicist and that of a software designer. On second thought, I’ll bet that is the story for anybody who works in public on something requiring special training. (And that would be pretty much anything worth doing.) In any case, Feynman saw it clearly and said it well.

  Read the article

• How do I get to work my Atheros AR9485 Wireless card in Ubuntu 14.04 LTS?

  - by Ivan Kreimer

  I've recently installed Ubuntu 14.04 LTS in my ASUS D550CA, and so far things have gone great. The only problem I've got is the Wi-Fi. It doesn't work. I've got an Qualcomm Atheros AR9485. I've tried installing the drivers, but the sytem says it doesn't find any. So I started looking around this forum for solutions. I've read every single post from this forum about my Wi-Fi network adapter, and I've found nothing that solves my problem. Let me give you some info about my configuration. Disclaimer: my configuration is in spanish, so if you don't understand something you can either use Google translate, or use your imagination. :D When I run $ sudo lshw -C network this is what I get: *-network DEACTIVATED descripción: Interfaz inalámbrica producto: AR9485 Wireless Network Adapter fabricante: Qualcomm Atheros id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: wlan0 versión: 01 serie: 28:e3:47:5c:5d:3f anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.13.0-34-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:f7d00000-f7d7ffff memoria:f7d80000-f7d8ffff *-network descripción: Ethernet interface producto: RTL8101E/RTL8102E PCI Express Fast Ethernet controller fabricante: Realtek Semiconductor Co., Ltd. id físico: 0.2 información del bus: pci@0000:03:00.2 nombre lógico: eth0 versión: 06 serie: e0:3f:49:ce:57:49 tamaño: 100Mbit/s capacidad: 100Mbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8402-1_0.0.1 10/26/11 ip=181.165.245.39 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s recursos: irq:41 ioport:e000(size=256) memoria:f0004000-f0004fff memoria:f0000000-f0003fff At the beginning, you'll see that it says "*-network DEACTIVATED" (or at least that's what I translated), is that something bad? Then, when I run ipconfig this is what I get: eth0 Link encap:Ethernet direcciónHW e0:3f:49:ce:57:49 Direc. inet:181.165.245.39 Difus.:181.165.245.255 Másc:255.255.255.0 Dirección inet6: fe80::e23f:49ff:fece:5749/64 Alcance:Enlace ACTIVO DIFUSIÓN FUNCIONANDO MULTICAST MTU:1500 Métrica:1 Paquetes RX:221199 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:62025 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:124409589 (124.4 MB) TX bytes:7471899 (7.4 MB) lo Link encap:Bucle local Direc. inet:127.0.0.1 Másc:255.0.0.0 Dirección inet6: ::1/128 Alcance:Anfitrión ACTIVO BUCLE FUNCIONANDO MTU:65536 Métrica:1 Paquetes RX:2977 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:2977 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:0 Bytes RX:397158 (397.1 KB) TX bytes:397158 (397.1 KB) When I put iwconfig: eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Finally, when I put sudo rfkill list all, I got: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: asus-bluetooth: Bluetooth Soft blocked: no Hard blocked: no I hope anyone can help me solve this, I've searched a lot and found no solution. Thanks a lot.

  Read the article

• I need help with 2D collision response (of stacking rotating polygons, with friction and gravity, for a game)

  - by Register Sole

  Hi I am looking for suggestions on how to write a collision response for game programming purpose (so not a scientific simulation). I am dealing with 2D polygons that are rotating, and I want them to be able to stack. I also want friction and gravity. I have a detection mechanism that returns the separating axis, how long the polygons are overlapping, and up to 2 points of contact. For the response, I am currently using an impulse-based response, which main idea is: find the separating axis, length of overlap, and the point of contact (if there are two, pick a random point between to simulate averaged force. i believe there are better ways than this) separate the object (modifying their positions, taking into account of their masses. i do not separate them completely though, to keep track that they are colliding to reduce jitter) calculate normal force based on the coefficient of restitution as if there is no friction. calculate friction, as if there is no normal force. I also assume that the direction of the friction is the same throughout the collision. apply the two forces (which result in a rather inaccurate result, since each force is calculated as if the other is not present. for non-rotating bodies though, this method is exact) I am aware that this method requires the coefficient of friction to be sufficiently small due to the assumption that the direction of friction stays the same in a collision. Also, the result is visually satisfying if gravity is not present. However, when there is gravity, objects on ground jitter and drift (even with zero coefficient of restitution)! It also happens for stacking objects. Larger coefficient of restitution and gravity increase the jittering. I hope you can help me with this. Some things i would like to know more about is how to handle collision with two point of contacts (how to end up having an object sitting still on the ground?), how to reduce, and prevent if possible, jitter and drift (do people use the most accurate method possible, or is there a trick to overcome this?), and how to handle multiple objects collision (for example, in the case of stacking objects, how do I check collisions between all of them and keep them all stable at every frame so they don't jitter?). A total reformulation of my algorithm is also welcomed, as long as it works. Another thing to note is that I am not making a Physics game, so I only need a visually satisfying response (though a realistic response is preferable, if it is not performance-heavy). But surely jittering and drifting objects on flat ground are not at all acceptable. In addition, I am a Physics student, so feel free to talk about impulse and whatever needed. Finally, I'm sorry for the long post. I tried to be as concise as I can. Thank you for reading it! EDIT It seems what I didn't manage to come up all this time is to separate resting contact as a class of its own and how to solve them. Currently reading the paper suggested by Jedediah. More suggestions on the topic are welcome :) CASE CLOSED After reading various papers referenced in the paper, successfully implemented simultaneous impulse method (referring to the original paper by Erin Catto, [Catt05]). Thanks maaaan!! The paper is wonderful. The current system is visibly much better than the previous. Still haven't separated resting contact as a class of its own though, which brings me to my next question. Love you all! Haha (sorry, I'm just so happy thanks to you).

  Read the article

• The null value cannot be assigned to a member with type System.Int64 which is a non-nullable value t

  - by BritishDeveloper

  I'm getting the following error in my MVC2 app using Linq to SQL (I am new to both). I am connected to an actual SQL server not weird mdf: System.InvalidOperationException The null value cannot be assigned to a member with type System.Int64 which is a non-nullable value type My SQL table has a column called MessageID. It is BigInt type and has a primary key, NOT NULL and an IDENTITY 1 1, no Default In my dbml designer it has the following declaration for this field: [global::System.Data.Linq.Mapping.ColumnAttribute(Storage="_MessageId", AutoSync=AutoSync.OnInsert, DbType="BigInt NOT NULL IDENTITY", IsPrimaryKey=true, IsDbGenerated=true)] public long MessageId { get { return this._MessageId; } set { if ((this._MessageId != value)) { this.OnMessageIdChanging(value); this.SendPropertyChanging(); this._MessageId = value; this.SendPropertyChanged("MessageId"); this.OnMessageIdChanged(); } } } It keeps telling me that null cannot be assigned - I'm not passing through null! It's a long - it can't even be null! Am I doing something stupid? I can't find a solution anywhere! I made this work by changing the type of this property to Nullable<long> but surely this can't be right? Update: I am using InsertOnSubmit. Simplified code: public ActionResult Create(Message message) { if (ModelState.IsValid) { var db = new MessagingDataContext(); db.Messages.InsertOnSubmit(message); db.SubmitChanges(); //line 93 (where it breaks) } } breaks on SubmitChanges() with the error at the top of this question. Update2: Stack trace: at Read_Object(ObjectMaterializer`1 ) at System.Data.Linq.SqlClient.ObjectReaderCompiler.ObjectReader`2.MoveNext() at System.Linq.Enumerable.FirstOrDefault[TSource](IEnumerable`1 source) at System.Data.Linq.ChangeDirector.StandardChangeDirector.DynamicInsert(TrackedObject item) at System.Data.Linq.ChangeDirector.StandardChangeDirector.Insert(TrackedObject item) at System.Data.Linq.ChangeProcessor.SubmitChanges(ConflictMode failureMode) at System.Data.Linq.DataContext.SubmitChanges(ConflictMode failureMode) at Qanda.Controllers.MessagingController.Ask(Message message) in C:\Qanda\Qanda\Controllers\MessagingController.cs:line 93 Update3: No one knows and I don't have enough clout to offer a bounty! So continued on my ASP.NET blog. Please help!

  Read the article

• How to add Spatial Solr to a Solrnet query

  - by Flo

  Hi, I am running Solr on my windows machine using jetty. I have downloaded the Spatial Solr Plugin which I finally managed to get up and running. I am also using Solrnet to query against Solr from my asp.net mvc project. Now, adding data into my index seems to work fine and the SpatialTierUpdateProcessorFactory does work as well. The problem is: How do I add the spatial query to my normal query using the Solrnet library. I have tried adding it using the "ExtraParams" parameter but that didn't work very well. Here is an example of me trying to combine the spatial query with a data range query. The date range query works fine without the spatial query attached to it: new SolrQuery("{!spatial lat=51.5224 long=-2.6257 radius=10000 unit=km calc=arc threadCount=2}") && new SolrQuery(MyCustomQuery.Query) && new SolrQuery(DateRangeQuery); which results in the following query against Solr: (({!spatial lat=51.5224 long=-2.6257 radius=100 unit=km calc=arc threadCount=2} AND *:*) AND _date:[2010-05-07T13:13:37Z TO 2011-05-07T13:13:37Z]) And the error message I get back is: The remote server returned an error: (400) Bad Request. SEVERE: org.apache.solr.common.SolrException: org.apache.lucene.queryParser.Pars eException: Cannot parse '(({!spatial lat=51.5224 lng=-2.6257 radius=10000 unit= km calc=arc threadCount=2} AND *:*) AND _date:[2010-05-07T13:09:49Z TO 2011-05-0 7T13:09:49Z])': Encountered " <RANGEEX_GOOP> "lng=-2.6257 "" at line 1, column 2 4. Was expecting: "}" ... Now, the thing is if I use the Solr Web Admin page and execute the following query against it, everything works fine. {!spatial lat=50.8371 long=4.35536 radius=100 calc=arc unit=km threadcount=2}text:London What is the best/correct way to call the spatial function using SolrNet. Is the best way to somehow add that bit of the query manually to the query string and is so how? Any help is much appreciated!

  Read the article

• Improve XPath efficiency for repeated, parameterized queries

  - by Chris Allan

  Hi, I am repeatedly performing the following XPath query (though parameterized by 'keywordText') around 40,000 times: String query = SystemGlobal.YAHOO_KEYWORDSSUBNODE + "/" + SystemGlobal.YAHOO_KEYWORDNODE + "[" + SystemGlobal.YAHOO_ATTRKEYPHRASE + "='" + keywordText + "']"; CachedXPathAPI cachedXPathAPI = new CachedXPathAPI(); NodeIterator nl = cachedXPathAPI.selectNodeIterator(doc.getElementsByTagName(SystemGlobal.YAHOO_KEYWORDSROOT).item(0), query); Node n; if ((n = nl.nextNode()) != null) { keyword.setKeywordId(Long.parseLong(cachedXPathAPI.selectSingleNode(n, SystemGlobal.YAHOO_ATTRKEYID).getTextContent())); keyword.setKeyPhrase(cachedXPathAPI.selectSingleNode(n, SystemGlobal.YAHOO_ATTRKEYPHRASE).getTextContent()); keyword.setStatus(mapStatus(cachedXPathAPI.selectSingleNode(n, SystemGlobal.YAHOO_ATTRSTATUS).getTextContent())); keyword.setCampaignId(Long.parseLong(cachedXPathAPI.selectSingleNode(n, "../../" + SystemGlobal.YAHOO_ATTRCAMPAIGNID).getTextContent())); keyword.setAdGroupId(Long.parseLong(cachedXPathAPI.selectSingleNode(n, "../" + SystemGlobal.YAHOO_ATTRADGROUPID).getTextContent())); On the first run of the script, all 40,000 runs of this piece of code will have nl.nextNode() == null, and everything runs quite quickly. However, on the following runs, when nl.nextNode() != null, then things slow down a lot - this takes around an additional 40min to run (whereas the first run takes maybe 1 minute). Oh, and the doc is constructed like so: InputSource in = new InputSource(new FileInputStream(filename)); DocumentBuilderFactory dfactory = DocumentBuilderFactory.newInstance(); dfactory.setNamespaceAware(true); doc = dfactory.newDocumentBuilder().parse(in); I tried including the following lines reportEvaluator = new XPathEvaluatorImpl(reportDoc); reportResolver = reportEvaluator.createNSResolver(reportDoc); and rather creating a NodeIterator, instead creating an XPathResult: XPathResult result = (XPathResult)reportEvaluator.evaluate(query, doc.getElementsByTagName(SystemGlobal.YAHOO_KEYWORDSROOT).item(0), reportResolver, XPathResult.UNORDERED_NODE_ITERATOR_TYPE, null); however this ran even slower Is there a way in which I can speed up the running of this script? I have seen references to precompiled queries, though I haven't seen many actual details. Also, as seen in the code, I am using CachedXPathAPI, though the benefit for this case is not so great. Any help is much appreciated! Chris Allan

  Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >