Search Results

Search found 22380 results on 896 pages for 'hard drive failure'.

Page 88/896 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

  • Recover harddrive data

    - by gameshints
    I have a dell laptop that recently "died" (It would get the blue screen of death upon starting) and the hard drive would make a weird cyclic clicking noises. I wanted to see if I could use some tools on my linux machine to recover the data, so I plugged it into there. If I run "fdisk" I get: Disk /dev/sdb: 20.0 GB, 20003880960 bytes 64 heads, 32 sectors/track, 19077 cylinders Units = cylinders of 2048 * 512 = 1048576 bytes Disk identifier: 0x64651a0a Disk /dev/sdb doesn't contain a valid partition table Fine, the partition table is messed up. However if I run "testdisk" in attempt to fix the table, it freezes at this point, making the same cyclical clicking noises: Disk /dev/sdb - 20 GB / 18 GiB - CHS 19078 64 32 Analyse cylinder 158/19077: 00% I don't really care about the hard drive working again, and just the data, so I ran "gpart" to figure out where the partitions used to be. I got this: dev(/dev/sdb) mss(512) chs(19077/64/32)(LBA) #s(39069696) size(19077mb) * Warning: strange partition table magic 0x2A55. Primary partition(1) type: 222(0xDE)(UNKNOWN) size: 15mb #s(31429) s(63-31491) chs: (0/1/1)-(3/126/63)d (0/1/32)-(15/24/4)r hex: 00 01 01 00 DE 7E 3F 03 3F 00 00 00 C5 7A 00 00 Primary partition(2) type: 007(0x07)(OS/2 HPFS, NTFS, QNX or Advanced UNIX) (BOOT) size: 19021mb #s(38956987) s(31492-38988478) chs: (4/0/1)-(895/126/63)d (15/24/5)-(19037/21/31)r hex: 80 00 01 04 07 7E FF 7F 04 7B 00 00 BB 6F 52 02 So I tried to mount just to the old NTFS partition, but got an error: sudo mount -o loop,ro,offset=16123904 -t ntfs /dev/sdb /mnt/usb NTFS signature is missing. Ugh. Okay. But then I tried to get a raw data dump by running dd if=/dev/sdb of=/home/erik/brokenhd skip=31492 count=38956987 But the file got up to 59885568 bytes, and made the same cyclical clicking noises. Obviously there is a bad sector, but I don't know what to do about it! The data is still there... if I view that 57MB file in textpad... I can see raw data from files. How can I get my data back? Thanks for any suggestions, Solution: I was able to recover about 90% of my data: Froze harddrive in freezer Used Ddrescue to make a copy of the drive Since Ddrescue wasn't able to get enough of my drive to use testdisk to recover my partitions/file system, I ended up using photorec to recover most of my files

    Read the article

  • DVD drive won't work after installing software

    - by Dan
    DVD drive was already region-free but for some reason would not play a certain DVD as it was the "wrong region". This is the first time I've played a DVD on the drive, but I've imported a lot of CDs before and they always worked fine, even CDs bought from the USA (I live in the UK). To get around this, I downloaded a piece of software called "DVD Region Killer". (Clicking the link won't start the download, so go ahead and check it.) After this, the drive isn't recognised. It won't show up in "My Computer", and when I insert a disc it will start to whir but not take action, i.e. iTunes won't recognise that I have put a CD in. In the Device Manager, the drive shows up with a caution-sign. The device status reads: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Disabling, uninstalling and reinstalling does not help. Clearly the software download is the issue, but it is difficult to remove. The only files I can find in Program Files are: C:\Program Files (x86)\Elaborate Bytes\DVD Region Killer which contains a changelog and a HTML document which has no info on uninstalling. It doesn't show up on "Add or Remove Programs", or even as a background process when I press ctrl-alt-del. Apparently it has no interface as such, and can be accessed by an icon in the system tray, (see review in link) but I don't see the icon. If it helps to know, I have a Dell Inspiron running Windows 8 64-bit, and the model of the DVD drive is: MATSHITA DVD+-RW UJ8C2 Thanks in advance.

    Read the article

  • I/O Error on LG GSA-H12N DVD drive on Windows 7

    - by Ashwin
    I am facing an I/O Error when I try to burn DVD data discs on my LG GSA-H12N DVD drive on Windows 7. Note that I was able to do this same operation on the same hardware/software just a day earlier without any problems, but with Windows XP. The only change (AFAIK) has been the installation of Windows 7 to replace Windows XP on this PC. Here is the error I get when I try to burn a DVD data disc using CDBurnerXP 4.2.7.1801: Burning error occured An error occured while burning the disc. Most likely the disc is not usable. Usually these errors happen if the inserted media is not compatible to the drive or of poor quality. (devNTSPTI_IO_Error) Could not write to Disc (LBA: 52864 Length: 32). SCSI Pass-through Interface I/O Error. - 0xFF045D Note that there can be no problem with the discs since I have been using the same discs (from the same box) just before the Windows 7 installation with no problems. The only change has been Windows 7. I tried InfraRecorder v0.5 and ImgBurn v2.5 and got similar I/O errors: Note that Windows 7 lists the LG GSA-H21N drive as being compatible (see this link). I also checked the LG Drivers website and using the firware update from there updated the drive firmware from version UL01 to UL02. But, even this has not helped. The drive reads DVDs without any problem, but continues to produce coasters. Could someone help me figure out what is the problem? Thanks :)

    Read the article

  • How can one undo many hard links?

    - by tOM Trottier
    I foolishly used Dupemerge to change all my duplicate files into hard links. Now Windows XP is not running right, eg, explorer won't start. Is there a utility which would traverse the filesystem looking for hard links, copy the file, delete the original link, and rename the copy, keeping the original attributes and name?

    Read the article

  • Disk boot failure in Windows 7 64-bit after installing the latest NVIDIA drivers

    - by Domchi
    I successfully installed the newest NVIDIA drivers (275.33) in Windows 7 64-bit and rebooted afterwards just in case. After the reboot, I got an error about missing MBR. I disconnected the slave disk so that Windows doesn't get confused and got this message: DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER It seems that Windows doesn't recognize the main disk anymore. I booted from Windows install disk but the main disk doesn't get listed as possible Windows locations to repair, and I can't get to it from the recovery prompt. The BIOS does recognize it, and I'm able to see it if I run diskpart - however "detail disk" in diskpart says that there are no volumes on the disk. I also tried bootrec /FixMbr without effect, and bootrec /FixBoot which gives the error message: Element not found. What else can I do? Why would diskpart say there are no volumes on the disk?

    Read the article

  • Page File - Why set one for each drive?

    - by Magic
    Hello, I have Windows Vista Business Edition running on my laptop (brand is HCL). I have 4 HDD which are as follows - C - 29.2 GB (of which only 3.68 GB is free) D - 39 GB (of which 37.8 GB is free) E - 39 GB (of which 37.3 GB is free) F - 41.6 (of which 41.4 GB is free) However, my page file settings are as below. Automatically manage paging file for all drives. Question - Why should I set one for each drive? Should I set my page file on the OS Root Drive. I happen to talk to a System Administrator in an IT company and he advised that we should never set the page file on the OS drive but on an alternate drive wherever possible. It would be really helpful, if you can guide me here or at least point me to the right resources so that I can read about paging and best practices of paging. Cheers,

    Read the article

  • Command line: Map network drive

    - by Seb Nilsson
    How do I write a command line in a .bat or .cmd that maps a network drive? I want the script to first check if the drive-letter is mapped, and if it is delete it and then map the drive. I only have the mapping-command right now. Please help me fill in the blanks: REM Check if drive exists, if it does, delete it @echo off net use q: /persistent:yes \\localhost\C$\MyFolder pause Are there any of the parameters wrong? Any that should be added?

    Read the article

  • Does reformatting the drive really removes spywares and viruses

    - by user23950
    I've recently read that the data that you deleted in windows using shift+del doesn't actually get deleted it is just made to be overwritable by other data that will soon be stored in your hard drive. And just marked as deleted. And there are some articles like this: http://www.howtogeek.com/howto/15037/use-an-ubuntu-live-cd-to-securely-wipe-your-pcs-hard-drive/ that shows how to completely wipe out the hard drive of all the data. And thus the data can't be recovered even by the most advanced software for recovering deleted data. Now my question is, does spyware, virus or other harmful really are lost forever if you reformat your drive?

    Read the article

  • How to reassign drive back into MediaShield (nvidia) RAID stripe

    - by scottwed
    So I managed to inadvertently remove the RAID configuration from 1 drive of a 2 drive stripe. I have both drives, unmodified, and undamaged. Specifically for MediaShield RAID, is there any way to reattach the 2nd drive back into the stripe? Current state is the stripe is displayed in Error status, and I have the other drive available, but unassigned. I strongly suspect there is no solution without purging the array completely and redefining the stripe, but I figured it was worth asking before I wipe out the data.

    Read the article

  • Daisychain external USB drive to WD My Book World Edition (Blue rings)

    - by d03boy
    I recently bought a new My Book Essential 1TB (WDBACW0010HBK-NESN) to daisychain to my older My Book World Edition 500GB (blue rings) with one of the version 01.xx.xx firmwares. At first when I connected the USB drive to the MBWE, it showed up in the System Summary section of the administration page without any issue. I was able to set up a new share on the new drive. The administration website moved very, very slow though. The administration pages became nearly unresponsive during this setup process. Once the share was set up I could access the new share but again, it was very slow, now through Windows Explorer. I looked around the internet and it seems that this is caused by the USB drive being formatted with NTFS. I tried reformatting it (again, as NTFS) just to double check and the same problem occurred. I then tried FAT32 but realized it would only support files of approximately 2GB and that is not acceptable for me. I decided to try a firmware upgrade on the MBWE to version 02.00.19. The firmware upgrade completed successfully but now the MBWE does not display the USB drive in the System Summary like it did with the earlier firmware version. The USB drive works perfectly fine when connected directly to my computer. Is there a way to solve this issue?

    Read the article

  • Installed Paragon HFS+ for Windows 8, now my pc won't recognize the external firewire drive

    - by Steve
    I'm not incredibly knowledgeable about computers and I really need some help. Just got a Seagate external firewire drive this morning. I downloaded the necessary pc driver (Paragon HFS+ for Windows 8) through their website per the instructions that came with the drive. After installation, I restarted and the pc recognized the firewire drive just fine. About three hours into copying files from my pc to the firewire drive, it gave me an error and told me the files couldn't be copied. When I clicked to get out of the message, the computer crashed. After an hour of it trying to repair itself in safe mode, it restored me to an earlier version before the system crashed. Here's my current dilemma: The Paragon HFS+ is still showing up in my programs as installed, but the Device Manager is not recognizing the drive. When I try to uninstall and reinstall Paragon, it interrupts me with a message saying "The setup must update files or services that cannot be updated while the system is running" and basically gives me the finger. I have no idea what to do now, as it won't let me uninstall and reinstall Paragon, and I have no idea why it crashed my computer in the first place. Is there possibly another Mac - PC firewire driver I can try downloading instead? I really don't know what I'm doing and any help would be greatly appreciated.

    Read the article

  • Eject a bad disk from optical drive

    - by Chuck
    I have an Alienware computer with one of the optical DVD drives that does not have a manual tray, just a slot to insert the disk. I recently inserted a disk that was apparently bad. It is unreadable does not show up in Windows Explorer. I tried right clicking on the Drive letter and hitting eject, but get an error message that there is no disk in the drive. How do I get the d--ned disk out so I can use the drive?

    Read the article

  • How to install Windows 7 on a MacBook with HDDs and no optical drive, without rEFIt

    - by user1238528
    I just removed the SuperDrive on my MacBook Pro and replaced it with an SSD. So now my laptop has a SSD, and a HDD, but no optical drive. I have Lion on the SSD and I want to install Windows 7 on the HDD. Unfortunately, Boot Camp only will install Windows off of the Windows DVD. I have made a bootable Windows 7 thumb drive but my MacBook Pro won’t boot off it. So my question is how can I install Windows on the other HDD? I have thought about maybe using Oracle VirtualBox to install it on that hard drive, but I don’t know if that would allow me to boot directly into Windows. I really don't want to go down the whole virtualization route. I know I could just take out the SSD, put back in the optical drive, run the Windows 7 DVD, take the optical drive back out, put the SSD back in. But that sounds like a nightmare. Also, I really don’t want to use things like rEFIt. Any advice?

    Read the article

  • Accessing clearcase view drive from virtual machine is slow

    - by PermanentGuest
    I have a windows XP virtual machine running under a Windows XP host. On the host : On the host clearcase 7.1.1.2 is installed. I have a dynamic view mapped onto some drive. The view has certain VOB/directory structure where my application DLLs from the nightly build and config files are stored. I run my application on the host machine which uses the DLLs and config files from the VOB and everything runs smooth. Now I want to move this set-up to a virtual machine. On the guest : I'm running the guest with a vm-player. I don't want to install clear-case on this as I don't want to expose this machine onto the network. The network setting in the guest is 'host-only'. I have mapped the host's clearcase view drive as a shared folder and I'm able to access this drive from the virtual machine. Also, the application is running. However, the problem is that the access of the clearcase drive from the virtual machine is very slow. I can experience this from the windows explorer. Due to this, the starting of my application takes several seconds in the virtual machine while on the guest it comes up pretty fast. My question is : Is there any way to speed up the performance? I have managed to copy some of the DLLs which don't change frequently to the virtual machine to improve the performance. However, there are still lot of DLLs which have to be taken from the clearcase drive as they change frequently. VMplayer version is : VM Player 3.0.1 build-227600 Both guest and host is : Windows XP service pack 3 Host clearcase is : clearcase 7.1.1.2

    Read the article

  • Trying to turn an WD Mybook 1TB to slave drive in PC

    - by Steph W
    Yes I realise that most external Hard Drives would not be transitioned into internal sitting Hard Drives, but unfortunately we broke the miniUSB connection that transfers the data from external Hard Drive to laptop. What we are TRYING to do now, is get the WD MyBook 1TB to funtion alongside (preferably as SLAVE) to my currently exsisting Desktop Hard Drive. both are SATA drives. We have the SATA power, and Data cables, and these are in place (but - somehow NOT working) - Help please - I am not computer illeterate, just don't know how to switch this so it works. How do I turn one into master, and the newer one (that was external) into the slave drive?

    Read the article

  • Virtual system drive is split between separate LUNs

    - by Tigran
    My hardware VMWare guy told me that a Win2008R2 server I have has a D drive that is split between two separate LUNs. He could not tell me if that's a good thing or bad just that it's not standard practice for him. Would you please explain the benefits or drawbacks of this setup? Thanks EDIT Some additional info. What happened was I had D drive already allocated. Then I asked for more. They said there's no more space on whatever LUN my D drive is on so the option they gave me was that part of the D drive will be on one LUN and other part will be on another LUN. Hope that helps

    Read the article

  • iMac boot from linux partition on external drive

    - by user74757
    I have the following "setup:" iMac (no internal drive/dead) --------- (Firewire) ------- [[MAC OS X]] | | | | (USB) | | | | [[MISC STORAGE PARTITION] [MISC STORAGE PARTITION] [EXT2 UBUNTU PARTITION]] I routinely use the firewire drive to boot MAC OS X. However, I would like to boot from the linux partition of the USB drive. This linux partition had linux installed on it from a live cd, and during that process, I told the installer to install GRUB on the usb drive (which happened to be /dev/sdd). My question is, how do I get this disk to show up during the iMac option-boot? Currently, only the firewire MAC OS X option shows up. I have read about rEFIT, but that appears to install it to the Mac OS X disk (would that still work?)... Also mentioned was installing rEFIT to the internal EFI system partition, but I don't know if that is wise.

    Read the article

  • Windows Login Failure

    - by Chris Bateson
    I'm getting an error in the Event Viewer, which is also generating a lot of Logon Failure messages on our syslog server. Pretty much stuck on how to resolve. EventID: 536 Logon Type: 3 Reason: The NetLogon component is not active This is for a Windows Server 2003 system. I have checked here We're using Shavlik Protect 9 to scan and deploy patches. Shavlik stores the credentials for the systems and uses those stored credentials to deploy patches. This system is able to scan and deploy to other systems on the network using those credentials and no errors are generated. When installing to the local system that Shavlik is physically on then this error is generated. Whats interesting is that it doesn't generate during a scan, and the patches install fine. We've contacted Shavlik to get the response that they are unable to help since it's a Microsoft error. Has anyone seen this?

    Read the article

  • Imac g5 with no OS nor CD drive

    - by sinekonata
    What I want: Ubuntu on a g5 Imac. What I have: An empty PC (Intel g5 17" Imac) with broken CD drive. Its model is A1173. This PC with Ubuntu 12.04 and an old Vista partition. a usb flash drive. Problems: No CD means the only boot Drive I could use is USB. There are no BIOS on Macs so I can't set boot settings or even see if it detects my USB drive. When I start the machine and press ALT the first and only thing I see is an old corrupted winXP partition and not a single option or additional information. So assuming blindly that the Mac hardware/firmware works normally, I don't have any Mac OS to use any of the tools that I found on different tutorials for building a bootable .img drive for macs. I can't find much software on Linux/Windows to substitute to those tools, for example among others converting an .iso file (win/linux) to .img (mac I guess). Which makes me think that the scenario where someone like me has Mac hardware but no Mac OS is extremely rare. So other than finding someone that has a Mac I have no solution. So I ask what would you do? the only thing is it should not involve any money (I know mac soft is rarely free) which also excludes getting any MacOS unless I can use a free macos.img for VM or restore the original Mac for free. Thank you

    Read the article

  • Hiding mapped drives for all users but letting programs access them

    - by AgainstClint
    What I'm looking for (and not sure if it's possible) is that we have 16 mapped network drives that are mapped when any user logs on, what I would like is to cut this down to just one visible drive yet leaving the other ones still usable to certain programs. I would just un-map them, however one of our constantly used programs writes to almost all of the drive letters so they need to be mapped for just that program, however they do not need to be visible to the user. Is this possible?

    Read the article

  • Form-Fitting Laptop Hard Drive?

    - by Peder Rice
    Not sure how to explain this exactly... if you need me to clarify, please add a comment and I'll address it. I'm looking for a USB hard drive that conforms to a laptop. Perhaps something that can be plugged in and carried around, tossed into a backpack without fear of ruining the connector or accidentally coming unplugged. Has anyone seen a hard drive like this?

    Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >