Search Results

Search found 4587 results on 184 pages for 'wow 22'.

Page 88/184 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

  • wget has a 4 second delay

    - by guisius
    Hello. I have tried to wget a page with windows/mac, and the response is instant while the linux vesion needs to wait for 4 seconds before it shows the response. I just hope this can be solved. More information added: in Ubuntu : wget xxx://192.168.0.135/test.cgi?cmd= -O test.txt --2011-03-04 14:21:17-- xxx://192.168.0.135/test.cgi?cmd= Connecting to 192.168.0.135:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `test.txt' [ <=> ] 17 --.-K/s in 0s 2011-03-04 14:21:22 (1.88 MB/s) - `test.txt' saved [17] while in Mac OS : wget xxx://192.168.0.135/test.cgi?cmd= -O test.txt --2011-03-04 14:22:33-- xxx://192.168.0.135/test.cgi?cmd= Connecting to 192.168.0.135:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] Saving to: `test.txt' [ <=> ] 17 --.-K/s in 0s 2011-03-04 14:22:33 (755 KB/s) - `test.txt' saved [17] in ubuntu it delays 4 seconds while windows and mac will not i believe it may related to some setting in the network config such as packet size , window frame , but i have no idea to set this PS: because the limit of the post not allow to post the url so i mark this as xxx

    Read the article

  • wireless card not detected

    - by user281219
    i have a old HP Compaq NX6125 with a new lunbuntu 14.04 32 bits install , but the wireless card is not working I have already done this steps and the wireless leds on the laptop are on but can't see any where the wireless interface , cloud`t do the last two steps . sudo apt-get remove bcmwl-kernel-source sudo apt-get install firmware-b43-installer b43-fwcutter Then Reboot And you need to activate the card from settings/network/wireless make it ON After this search for wireless icon at the task bar and look for your wifi. lshw -class network: *-network:0 description: Ethernet interface product: NetXtreme BCM5788 Gigabit Ethernet vendor: Broadcom Corporation physical id: 1 bus info: pci@0000:02:01.0 logical name: eth0 version: 03 serial: 00:0f:b0:f7:d1:0f size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 66MHz capabilities: pm vpd msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.134 duplex=full firmware=5788-v3.26 ip=192.168.1.120 latency=64 link=yes mingnt=64 multicast=yes port=twisted pair speed=100Mbit/s resources: irq:23 memory:d0000000-d000ffff *-network:1 description: Network controller product: BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller vendor: Broadcom Corporation physical id: 2 bus info: pci@0000:02:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: bus_master configuration: driver=b43-pci-bridge latency=64 resources: irq:22 memory:d0010000-d0011fff *-network description: Wireless interface physical id: 1 logical name: wlan2 serial: 00:14:a5:77:9e:10 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.13.0-29-generic firmware=666.2 link=no multicast=yes wireless=IEEE 802.11bg

    Read the article

  • NVIDIA X Server TwinView isses with 2 GeForce 8600GT cards

    - by Big Daddy
    Full disclosure, I am relatively new to Linux and loving the learning curve but I am undoubtedly capable of ignorant mistakes I have a rig I am building for my home office desktop. The basics: Gigabyte MB AMD 64bt processor Ubuntu 12.04 64bit two Nvidia GeForce 8600GT video cards using a SLI bridge two 22" DVI input HP monitors So here is my issue (it is driving me nuts) with X Server. If I plug both monitors into GPU 0 X Server auto configures TwinView and all is grand, works like a charm, though both are running off of GPU 0. If I plug one monitor into GPU 0 and one monitor into GPU 1, X Server enables the monitor on GPU 0, sees but keeps the monitor on GPU 1 disabled. My presumption (we all know the saying about presumptions) is that all I would have to do is select the disabled monitor on GPU 1 and drop down the Configure pull down and select TwinView...problem is when the monitors are plugged in this way, the TwinView option is greyed out and can not be selected. What am I not understanding here? Is there some sort of configuration I need to do elsewhere for Ubuntu to utilize both GPU's? Any help will be most appreciated, thanks in advance.

    Read the article

  • Logitech C510 HD Webcam related question

    - by Ashfame
    I am going to buy Logitech C510 HD webcam and I just checked on other questions here on AskUbuntu that it works out of the box with cheese. My question is can it be limited in any functionality that I would like to do with it? I would like it to be used with everything - Skype, Gtalk video chat, Facebook, Youtube etc I would like the ability to record or do a video call in lesser resolution video (its a 720p one). Also since I read that I should have a Core2Duo 2.2Ghz for 720p but I have a 2.0Ghz one, would it be possible for me to first record it and then encode it after recording if my processor really start giving issue when doing on-the-fly encoding? Anything else that I should consider? I also have a ATI HD 4850 512MB card, if it can help in encoding on-the-fly or is there a chance that my graphics card alone can handle it and those specs were just for a system without a graphics card? I believe so. Also, I got no worries in dealing with console, if I have to do some of the things above in terminal. Other possible significant details: I have a dual screen setup 29" (1360X768) & 22" (1680X1050) which might be using some good power from GPU and I have 2GB DDR2 800Mhz RAM.

    Read the article

  • How do I debug an overheating problem?

    - by Tab
    Hello guys. I have a problem with my Laptop (Dell Inspiron 1564 Core i5 4GB Ram VGA ATI Mobility Radeon HD 4300 running Ubuntu 10.10 32bit). It shuts down abruptly without even a lag in the application I am working with before shutdown. I think it's overheating problem. Actually the laptop is hot all the time when I am running Ubuntu. When I switch back to windows, even with intense load it won't shutdown or show any problem as long as I keep proper ventilation (when the air openings are blocked it does the same). Actually on Ubuntu i don't usually do things that need much CPU power, usually surfing internet, coding web pages and sometimes playing with python and ruby. I am not enabling desktop effects so no GPU load except the normal GNOME gui. Now as I am writing the Processor load in the panel monitor applet is 0%, Memory 11% by programs, 22% by cache. And i have CPU Frequency monitor for each of the 4 cores set to 1.20 Ghz (the lowest possible value, i am not sure if this applet does really limit CPU usage). Running sensors in terminal gave me temp1: +26.8°C (crit = +100.0°C) temp2: +0.0°C (crit = +100.0°C) hddtemp /dev/sda at the terminal gave me /dev/sda: WDC WD3200BEVT-75ZCT2: 46°C All that fine but the laptop is Really hot i can feel it in the keyboard, mouse pad is painful to touch, and the fan is always spinning. I am also placing 2 small fans running on USB under the laptop right now and the laptop is lifted over the fans so it's well ventilated. When I am running windows it doesn't get that hot except when there is a really big load on the CPU and this is keeping me away from using Linux for everyday tasks. Actually I don't care much for speed as I can deal with low speed it's not going to shutdown abruptly. So please if you can help me and tell me what are the possible causes, where should I start ?

    Read the article

  • Code Clone Analysis on Rawr &ndash; Part 1

    - by Dylan Smith
    In this post we’ll take a look at the first result from the Code Clone Analysis, and do some refactoring to eliminate the duplication.  The first result indicated that it found an exact match repeated 14 times across the solution, with 18 lines of duplicated code in each of the 14 blocks.   Net Lines Of Code Deleted: 179     In this case the code in question was a bunch of classes representing the various Bosses.  Every Boss class has a constructor that initializes a whole bunch of properties of that boss, however, for most bosses a lot of these are simply set to 0’s.     Every Boss class inherits from the class MultiDiffBoss, so I simply moved all the initialization of the various properties to the base class constructor, and left it up to the Boss subclasses to only set those that are different than the default values. In this case there are actually 22 Boss subclasses, however, due to some inconsistencies in the code structure Code Clone only identified 14 of them as identical blocks.  Since I was in there refactoring the 14 identified already, it was pretty straightforward to identify the other 8 subclasses that had the same duplicated behavior and refactor those also.   Note: Code Clone Analysis is pretty slow right now.  It takes approx 1 min to build this solution, but it takes 9 mins to run Code Clone Analysis.  Personally, if the results are high quality I’m OK with it taking a long time to run since I don’t expect it’s something I would be running all that often.  However, it would be nice to be able to run it as part of a nightly build, but at this time I don’t believe it’s possible to run outside of Visual Studio due to a dependency on the meta-data available in the VS environment.

    Read the article

  • VMware Kernel Module Updater hangs on Ubuntu 13.04

    VMware Player has a nice auto-detection of kernel changes, and requests the user to compile the required modules in order to load them. This happens from time to time after a regular update of your system. Usually, the dialog of VMware Kernel Module Updater pops up, asks for root access authentication, and completes the compilation. VMware Player or Workstation checks if modules for the active kernel are available. In theory this is supposed to work flawlessly but in reality there are pitfalls occassionally. With the recent upgrade to Ubuntu 13.04 Raring Ringtail and the latest kernel 3.8.0-21 the actual VMware Kernel Module Updater simply disappeared and the application wouldn't start as expected. When you launch VMware Player as super user (root) the dialog would stall like so: VMware Kernel Module Updater stalls while stopping the services Prior to version 5.x of VMware Player or version 7.x of VMware Workstation you would run a command like: $ sudo vmware-config.pl to resolve the module version conflict but this doesn't work anyway. Solution Instead, you have to execute the following line in a terminal or console window: $ sudo vmware-modconfig --console --install-all Those switches are (as of writing this article) not documented in the output of the --help switch. But VMware already documented this procedure in their knowledge base: VMware Workstation stops functioning after updating the kernel on a Linux host (1002411). Update As of today I had the first kernel upgrade to version 3.8.0-22 in Ubuntu 13.04. Don't even try it without vmware-modconfig...

    Read the article

  • How do I fix the HDMI/DVI display output with Intel HD 4000 Graphics in 12.04?

    - by YumYumYum
    I have an Alienware Dell PC with Intel HD 4000 Graphics (Ivy Bridge) as verified by the output of lspci | grep VGA posted below. 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) The PC only has HDMI and DVI display outputs and using the HDMI output I am only being offered abnormal resolutions. As you can see below it does not even list HDMI1 or DVI1 but just only a fallback. $ export DISPLAY=:0.0 && xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 1360 x 768, maximum 1360 x 768 default connected 1360x768+0+0 0mm x 0mm 1360x768 0.0* 1024x768 0.0 800x600 0.0 640x480 0.0 How can I fix this? Does it just need to be configured differently or will I need to use a newer kernel (as Intel Graphics drivers are included in the kernel)? Follow up: kernel to latest Step 1: Go to: http://kernel.ubuntu.com/~kernel-ppa/mainline/ Go to last: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/ Download: http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-headers-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-headers-3.6.0-030600rc3_3.6.0-030600rc3.201208221735_all.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-image-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb http://kernel.ubuntu.com/~kernel-ppa/mainline/v3.6-rc3-quantal/linux-image-extra-3.6.0-030600rc3-generic_3.6.0-030600rc3.201208221735_amd64.deb Step 2: sudo dpkg -i linux*.deb Step 3: reboot which shows that i have Ubuntu 12.04 with latest $ uname -a Linux sun-Alienware-X51 3.6.0-030600rc3-generic #201208221735 SMP Wed Aug 22 21:36:32 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux But still same problem remain.

    Read the article

  • CCSpriteHole in cocos2d 2.0?

    - by rakkarage
    i was using this cocos2d class CCSpriteHole in cocos2d 1.0 fine... http://jpsarda.tumblr.com/post/15779708304/new-cocos2d-iphone-extensions-a-progress-bar-and-a i am trying to convert it to cocos2d 2.0... i got it to compile by changing glVertexPointer to glVertexAttribPointer like in the 2.0 version of CCSpriteScale9 here http://jpsarda.tumblr.com/post/9162433577/scale9grid-for-cocos2d and changing contentSizeInPixels_ to contentSize_... -(id) init { if( (self=[super init]) ) { opacityModifyRGB_ = YES; opacity_ = 255; color_ = colorUnmodified_ = ccWHITE; capSize=capSizeInPixels=CGSizeZero; //Not used blendFunc_.src = CC_BLEND_SRC; blendFunc_.dst = CC_BLEND_DST; // update texture (calls updateBlendFunc) [self setTexture:nil]; // default transform anchor anchorPoint_ = ccp(0.5f, 0.5f); vertexDataCount=24; vertexData = (ccV2F_C4F_T2F*) malloc(vertexDataCount * sizeof(ccV2F_C4F_T2F)); [self setTextureRectInPixels:CGRectZero untrimmedSize:CGSizeZero]; } return self; } -(id) initWithTexture:(CCTexture2D*)texture rect:(CGRect)rect { NSAssert(texture!=nil, @"Invalid texture for sprite"); // IMPORTANT: [self init] and not [super init]; if( (self = [self init]) ) { [self setTexture:texture]; [self setTextureRect:rect]; } return self; } -(id) initWithTexture:(CCTexture2D*)texture { NSAssert(texture!=nil, @"Invalid texture for sprite"); CGRect rect = CGRectZero; rect.size = texture.contentSize; return [self initWithTexture:texture rect:rect]; } -(id) initWithFile:(NSString*)filename { NSAssert(filename!=nil, @"Invalid filename for sprite"); CCTexture2D *texture = [[CCTextureCache sharedTextureCache] addImage: filename]; if( texture ) return [self initWithTexture:texture]; return nil; } +(id)spriteWithFile:(NSString*)f { return [[self alloc] initWithFile:f]; } - (void) dealloc { if (vertexData) free(vertexData); } -(void) updateColor { ccColor4F color4; color4.r=(float)color_.r/255.0f; color4.g=(float)color_.g/255.0f; color4.b=(float)color_.b/255.0f; color4.a=(float)opacity_/255.0f; for (int i=0; i<vertexDataCount; i++) { vertexData[i].colors=color4; } } -(void)updateTextureCoords:(CGRect)rect { CCTexture2D *tex = texture_; if(!tex) return; float atlasWidth = (float)tex.pixelsWide; float atlasHeight = (float)tex.pixelsHigh; float left,right,top,bottom; left = rect.origin.x/atlasWidth; right = left + rect.size.width/atlasWidth; top = rect.origin.y/atlasHeight; bottom = top + rect.size.height/atlasHeight; // // |/|/|/| // CGSize capTexCoordsSize=CGSizeMake(capSizeInPixels.width/atlasWidth, capSizeInPixels.height/atlasHeight); // From left to right //Top band // Left vertexData[0].texCoords=(ccTex2F){left,top}; vertexData[1].texCoords=(ccTex2F){left,top+capTexCoordsSize.height}; vertexData[2].texCoords=(ccTex2F){left+capTexCoordsSize.width,top}; vertexData[3].texCoords=(ccTex2F){left+capTexCoordsSize.width,top+capTexCoordsSize.height}; // Center vertexData[4].texCoords=(ccTex2F){right-capTexCoordsSize.width,top}; vertexData[5].texCoords=(ccTex2F){right-capTexCoordsSize.width,top+capTexCoordsSize.height}; // Right vertexData[6].texCoords=(ccTex2F){right,top}; vertexData[7].texCoords=(ccTex2F){right,top+capTexCoordsSize.height}; //Center band // Left vertexData[8].texCoords=(ccTex2F){left,bottom-capTexCoordsSize.height}; vertexData[9].texCoords=(ccTex2F){left,top+capTexCoordsSize.height}; vertexData[10].texCoords=(ccTex2F){left+capTexCoordsSize.width,bottom-capTexCoordsSize.height}; vertexData[11].texCoords=(ccTex2F){left+capTexCoordsSize.width,top+capTexCoordsSize.height}; // Center vertexData[12].texCoords=(ccTex2F){right-capTexCoordsSize.width,bottom-capTexCoordsSize.height}; vertexData[13].texCoords=(ccTex2F){right-capTexCoordsSize.width,top+capTexCoordsSize.height}; // Right vertexData[14].texCoords=(ccTex2F){right,bottom-capTexCoordsSize.height}; vertexData[15].texCoords=(ccTex2F){right,top+capTexCoordsSize.height}; //Bottom band //Left vertexData[16].texCoords=(ccTex2F){left,bottom}; vertexData[17].texCoords=(ccTex2F){left,bottom-capTexCoordsSize.height}; vertexData[18].texCoords=(ccTex2F){left+capTexCoordsSize.width,bottom}; vertexData[19].texCoords=(ccTex2F){left+capTexCoordsSize.width,bottom-capTexCoordsSize.height}; // Center vertexData[20].texCoords=(ccTex2F){right-capTexCoordsSize.width,bottom}; vertexData[21].texCoords=(ccTex2F){right-capTexCoordsSize.width,bottom-capTexCoordsSize.height}; // Right vertexData[22].texCoords=(ccTex2F){right,bottom}; vertexData[23].texCoords=(ccTex2F){right,bottom-capTexCoordsSize.height}; } -(void) updateVertices { float left=0; //-spriteSizeInPixels.width*0.5f; float right=left+contentSize_.width; float bottom=0; //-spriteSizeInPixels.height*0.5f; float top=bottom+contentSize_.height; float holeLeft=holeRect.origin.x*CC_CONTENT_SCALE_FACTOR(); float holeRight=holeLeft+holeRect.size.width*CC_CONTENT_SCALE_FACTOR(); float holeBottom=holeRect.origin.y*CC_CONTENT_SCALE_FACTOR(); float holeTop=holeBottom+holeRect.size.height*CC_CONTENT_SCALE_FACTOR(); // // |/|/|/| // // From left to right //Top band // Left vertexData[0].vertices=(ccVertex2F){left,top}; vertexData[1].vertices=(ccVertex2F){left,holeTop}; vertexData[2].vertices=(ccVertex2F){holeLeft,top}; vertexData[3].vertices=(ccVertex2F){holeLeft,holeTop}; // Center vertexData[4].vertices=(ccVertex2F){holeRight,top}; vertexData[5].vertices=(ccVertex2F){holeRight,holeTop}; // Right vertexData[6].vertices=(ccVertex2F){right,top}; vertexData[7].vertices=(ccVertex2F){right,holeTop}; //Center band // Left vertexData[8].vertices=(ccVertex2F){left,holeBottom}; vertexData[9].vertices=(ccVertex2F){left,holeTop}; vertexData[10].vertices=(ccVertex2F){holeLeft,holeBottom}; vertexData[11].vertices=(ccVertex2F){holeLeft,holeTop}; // Center vertexData[12].vertices=(ccVertex2F){holeRight,holeBottom}; vertexData[13].vertices=(ccVertex2F){holeRight,holeTop}; // Right vertexData[14].vertices=(ccVertex2F){right,holeBottom}; vertexData[15].vertices=(ccVertex2F){right,holeTop}; //Bottom band //Left vertexData[16].vertices=(ccVertex2F){left,bottom}; vertexData[17].vertices=(ccVertex2F){left,holeBottom}; vertexData[18].vertices=(ccVertex2F){holeLeft,bottom}; vertexData[19].vertices=(ccVertex2F){holeLeft,holeBottom}; // Center vertexData[20].vertices=(ccVertex2F){holeRight,bottom}; vertexData[21].vertices=(ccVertex2F){holeRight,holeBottom}; // Right vertexData[22].vertices=(ccVertex2F){right,bottom}; vertexData[23].vertices=(ccVertex2F){right,holeBottom}; } -(void) setHole:(CGRect)r inRect:(CGRect)totalSurface { holeRect=r; self.contentSize=totalSurface.size; holeRect.origin=ccpSub(holeRect.origin,totalSurface.origin); CGPoint holeCenter=ccp(holeRect.origin.x+holeRect.size.width*0.5f,holeRect.origin.y+holeRect.size.height*0.5f); self.anchorPoint=ccp(holeCenter.x/contentSize_.width,holeCenter.y/contentSize_.height); //[self updateTextureCoords:rectInPixels_]; [self updateVertices]; [self updateColor]; } -(void) draw { BOOL newBlend = NO; if( blendFunc_.src != CC_BLEND_SRC || blendFunc_.dst != CC_BLEND_DST ) { newBlend = YES; glBlendFunc( blendFunc_.src, blendFunc_.dst ); } glBindTexture(GL_TEXTURE_2D, [texture_ name]); glVertexAttribPointer(kCCVertexAttrib_Position, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[0].vertices); glVertexAttribPointer(kCCVertexAttrib_TexCoords, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[0].texCoords); glVertexAttribPointer(kCCVertexAttrib_Color, 4, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[0].colors); glDrawArrays(GL_TRIANGLE_STRIP, 0, 8); glVertexAttribPointer(kCCVertexAttrib_Position, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[8].vertices); glVertexAttribPointer(kCCVertexAttrib_TexCoords, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[8].texCoords); glVertexAttribPointer(kCCVertexAttrib_Color, 4, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[8].colors); glDrawArrays(GL_TRIANGLE_STRIP, 0, 8); glVertexAttribPointer(kCCVertexAttrib_Position, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[16].vertices); glVertexAttribPointer(kCCVertexAttrib_TexCoords, 2, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[16].texCoords); glVertexAttribPointer(kCCVertexAttrib_Color, 4, GL_FLOAT, GL_FALSE, sizeof(ccV2F_C4F_T2F), &vertexData[16].colors); glDrawArrays(GL_TRIANGLE_STRIP, 0, 8); if( newBlend ) glBlendFunc(CC_BLEND_SRC, CC_BLEND_DST); } -(void)setTextureRectInPixels:(CGRect)rect untrimmedSize:(CGSize)untrimmedSize { rectInPixels_ = rect; rect_ = CC_RECT_PIXELS_TO_POINTS( rect ); //[self setContentSizeInPixels:untrimmedSize]; [self updateTextureCoords:rectInPixels_]; } -(void)setTextureRect:(CGRect)rect { CGRect rectInPixels = CC_RECT_POINTS_TO_PIXELS( rect ); [self setTextureRectInPixels:rectInPixels untrimmedSize:rectInPixels.size]; } // // RGBA protocol // #pragma mark CCSpriteHole - RGBA protocol -(GLubyte) opacity { return opacity_; } -(void) setOpacity:(GLubyte) anOpacity { opacity_ = anOpacity; // special opacity for premultiplied textures if( opacityModifyRGB_ ) [self setColor: (opacityModifyRGB_ ? colorUnmodified_ : color_ )]; [self updateColor]; } - (ccColor3B) color { if(opacityModifyRGB_){ return colorUnmodified_; } return color_; } -(void) setColor:(ccColor3B)color3 { color_ = colorUnmodified_ = color3; if( opacityModifyRGB_ ){ color_.r = color3.r * opacity_/255; color_.g = color3.g * opacity_/255; color_.b = color3.b * opacity_/255; } [self updateColor]; } -(void) setOpacityModifyRGB:(BOOL)modify { ccColor3B oldColor = self.color; opacityModifyRGB_ = modify; self.color = oldColor; } -(BOOL) doesOpacityModifyRGB { return opacityModifyRGB_; } #pragma mark CCSpriteHole - CocosNodeTexture protocol -(void) updateBlendFunc { if( !texture_ || ! [texture_ hasPremultipliedAlpha] ) { blendFunc_.src = GL_SRC_ALPHA; blendFunc_.dst = GL_ONE_MINUS_SRC_ALPHA; [self setOpacityModifyRGB:NO]; } else { blendFunc_.src = CC_BLEND_SRC; blendFunc_.dst = CC_BLEND_DST; [self setOpacityModifyRGB:YES]; } } -(void) setTexture:(CCTexture2D*)texture { // accept texture==nil as argument NSAssert( !texture || [texture isKindOfClass:[CCTexture2D class]], @"setTexture expects a CCTexture2D. Invalid argument"); texture_ = texture; [self updateBlendFunc]; } -(CCTexture2D*) texture { return texture_; } @end but now positioning and scaling seem to not work? and it starts in the wrong position... but changing the opacity still works. so i was wondering if anyone can see why my 2.0 version is not working? or if maybe there is a better way to do a sprite hole with cocos2d/opengl 2.0? shaders? thanks

    Read the article

  • Where does the YouTube video files stored on system nowadays?

    - by souravc
    When I open a youtube video with firefox I could not find any video file inside ~/.mozilla/firefox/<some_string>.default/Cache/. I also tried with google-chrome like, ps ax | grep flash ls -l /proc/[*PID*]/fd | grep Flash But again /proc/[*PID*]/fd does not have any video like file. ls -l /proc/[*PID*]/fd have some results like lrwx------ 1 root root 64 Nov 9 12:18 22 -> /run/shm/.com.google.Chrome.eOsHNu (deleted) lrwx------ 1 root root 64 Nov 9 12:18 23 -> /run/shm/.com.google.Chrome.p8h6BL (deleted) Result of ls -l /proc/[*PID*]/fd | grep Flash for some videos from other site is like lrwx------ 1 root root 64 Nov 9 12:35 26 -> /home/username/.config/google-chrome/Default/Pepper Data/Shockwave Flash/.com.google.Chrome.QMzxP8 (deleted) But could not be copied. Then what are the places where firefox or google-chrome stores the streaming videos? And is it possible to recover(copy) a video from there to watch them offline? P.S I have other ways(downloaders) to have streaming videos, but my question is very specific.

    Read the article

  • Google+ Platform Office Hours for April 25, 2012: Q&A with the Hangouts API Team

    Google+ Platform Office Hours for April 25, 2012: Q&A with the Hangouts API Team This week we were joined by Richard Dunn of the Hangouts API team who answered questions about the Hangouts API. Discuss this video on Google+: goo.gl 1:09 - What's going on with the Hangouts API? 3:43 - Jason shares information about his current projects 5:40 - Can I prevent a Hangout app from running within a Hangout On Air? 8:05 - Can we have APIs to control On Air features? 10:05 - Could a Silverlight / JavaScript bridge be created so we can use them in Hangout Apps? 12:01 - Is there a way to obfuscate the code for a Hangouts app? 15:24 - Are there plans to consolidate the various comment and chat channels for Hangouts On Air? 18:53 - When will Hangouts On Air come to Android? 20:48 - How can I access the OAuth token from the API? - developers.google.com 22:39 - When will we have Hangout apps on the mobile devices? 24:57 - Is it possible to search for 2 or more hash tags via the search REST API? 25:45 - Will we see a PHP REST API demo today? 26:20 - How can I restrict usage of a Hangout app? 30:07 - How do you hold a hangout that is simulcast on YouTube? 31:07 - Why do users show up as empty objects before they've authorized the app? 32:52 - What are the best practice for storing user specific configuration? 38:06 - Is anyone doing in application payment? 39:22 - Has anyone written any books about Hangout apps? From: GoogleDevelopers Views: 1619 19 ratings Time: 42:04 More in Science & Technology

    Read the article

  • Calendar issue in simple java form using swing package?

    - by Rand Mate
    I have created a form using java swing package, For the purpose of adding Date of Birth in the form I have used the following code particularly to add in java Frame via Swing Package. Is there any alternative way to simplify the code. JLabel l2 = new JLabel("Date of Birth"); l2.setBounds(200,160,100,20); String day[] ={"1","2","3","4","5","6","7","8","9","10","11","12","13","14","15","16","17","18","19","20","21","22","23","24","25","26","27","28","29","30"}; String month[] = {"Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", "Dec"}; String year[] = {"2012","2011","2010","2009","2008","2007","2006","2005","2004","2003","2002","2001","2000","1999","1998","1997","1996","1995","1994","1993","1992","1991","1990","1989","1988","1987","1986","1985","1984","1983","1982","1981","1980","1979","1976","1975"}; JComboBox cb1 = new JComboBox(day); cb1.setBounds(450,160,50,20); JComboBox cb2 = new JComboBox(month); cb2.setBounds(500,160,50,20); JComboBox cb3 = new JComboBox(year); cb3.setBounds(550,160,60,20);

    Read the article

  • Only one user can connect to Ubuntu samba server

    - by StaticMethod
    I setup a samba server on 12.04 LTS, and it works great for one user but not the others. I am trying to map a network drive from a windows 7 laptop. I can successfully authenticate with one user, but the other two both get "Access is denied" errors. Here is my smb.conf file. [global] server string = %h server (Samba, Ubuntu) map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers [share] comment = Ubuntu File Server Share path = /srv/share read only = No create mask = 0755 I know that the service is successfully reading from the /etc/passwd file because if I change the Linux password for the user that works, I have to use the new password when I connect. I changed all the users so they are all members of the same groups (all three users are admins anyway). I only ever have one user connected at a time. Here are the permissions on the shared folder /srv$ ls -l drwxrwxrwx 1 nobody nogroup 16 Feb 22 17:05 share Any ideas?

    Read the article

  • Reduce weight in healthy way

    - by krnites
    This post is my daily summary of activities that I am going to take to reduce my overall weight by 15 lbs. I am not an overweight person as per my height of 5.11 I have decent weight of 178.4 and good body build. But from a long time(approx 3 month) I am thinking of getting 2-3 abs (note not 6 abs) and reducing my weight to below 170 ( which I was 2 years ago). This post will work as my daily diary of what I ate, what exercises I did, what apps/software I used to monitor my weight loss. Sometime it will not contain much information but some time when I will research will contain information for people who really want to reduce weight. My current target for next few week is to run 2.5 miles everyday under 30 minutes. Eat a lot of fruits and vegetable. No burger or tacos. No meat either fat or lean. And checking body weight after every four hour. Here are reading for today10:00 AM  - 178.22:00 PM    - 178.4I have already ran for 2 miles in 25 minutes, did a little bit of shoulder exercise and had eaten small bowl of vegetable biryani and two bread.I hope this post and all coming post will give the reader the first hand experience of a person who had read every blog and articles related to reducing weight and now trying to do it by implementing all of them by self. My approach will be a healthy way of reducing weight, I am not going to starve my self or going to eat only fruits all day. I will enjoy all the food item that I like to eat and will work hard on my body. This way I will / reduce the weight naturally and will increase the flexibility, durability and immunity of my system /body.

    Read the article

  • Loading Entities Dynamically with Entity Framework

    - by Ricardo Peres
    Sometimes we may be faced with the need to load entities dynamically, that is, knowing their Type and the value(s) for the property(ies) representing the primary key. One way to achieve this is by using the following extension methods for ObjectContext (which can be obtained from a DbContext, of course): 1: public static class ObjectContextExtensions 2: { 3: public static Object Load(this ObjectContext ctx, Type type, params Object [] ids) 4: { 5: Object p = null; 6:  7: EntityType ospaceType = ctx.MetadataWorkspace.GetItems<EntityType>(DataSpace.OSpace).SingleOrDefault(x => x.FullName == type.FullName); 8:  9: List<String> idProperties = ospaceType.KeyMembers.Select(k => k.Name).ToList(); 10:  11: List<EntityKeyMember> members = new List<EntityKeyMember>(); 12:  13: EntitySetBase collection = ctx.MetadataWorkspace.GetEntityContainer(ctx.DefaultContainerName, DataSpace.CSpace).BaseEntitySets.Where(x => x.ElementType.FullName == type.FullName).Single(); 14:  15: for (Int32 i = 0; i < ids.Length; ++i) 16: { 17: members.Add(new EntityKeyMember(idProperties[i], ids[i])); 18: } 19:  20: EntityKey key = new EntityKey(String.Concat(ctx.DefaultContainerName, ".", collection.Name), members); 21:  22: if (ctx.TryGetObjectByKey(key, out p) == true) 23: { 24: return (p); 25: } 26:  27: return (p); 28: } 29:  30: public static T Load<T>(this ObjectContext ctx, params Object[] ids) 31: { 32: return ((T)Load(ctx, typeof(T), ids)); 33: } 34: } This will work with both single-property primary keys or with multiple, but you will have to supply each of the corresponding values in the appropriate order. Hope you find this useful!

    Read the article

  • SSH asks for password

    - by user1435470
    I have already : Installed the server Generated the pub/pri keys with -P "" Copied the id_rsa.pub to authorized_keys ssh localhost answered "yes", copied to known_hosts tried ssh localhost still asks for password Output: hduser@hduser1-desktop:~$ ssh -v localhost OpenSSH_5.3p1 Debian-3ubuntu7, OpenSSL 0.9.8k 25 Mar 2009 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to localhost [127.0.0.1] port 22. debug1: Connection established. debug1: identity file /home/hduser/.ssh/identity type -1 debug1: identity file /home/hduser/.ssh/id_rsa type 1 debug1: Checking blacklist file /usr/share/ssh/blacklist.RSA-2048 debug1: Checking blacklist file /etc/ssh/blacklist.RSA-2048 debug1: identity file /home/hduser/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3p1 Debian- 3ubuntu7 debug1: match: OpenSSH_5.3p1 Debian-3ubuntu7 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3p1 Debian-3ubuntu7 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'localhost' is known and matches the RSA host key. debug1: Found key in /home/hduser/.ssh/known_hosts:3 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Offering public key: /home/hduser/.ssh/id_rsa debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/hduser/.ssh/identity debug1: Trying private key: /home/hduser/.ssh/id_dsa debug1: Next authentication method: password Any suggestions ? Cheers

    Read the article

  • Nvidia GeForce Gt-520M-cn on intel dh61ww Ubuntu 12.04

    - by j goseeped
    hi people i hope you can help a little bit , i appreciate your time look: i have a this desktop i7 2600, 8gb ram ddr3, board intel dh61ww, Geforce Nvidia GT520-cn 2Gb ddr3, i just install ubuntu 64bits 12.04 kernel 3.2.0-23-generic , i want to setup two monitors samsung led 22" and get start mi video card 1) i download and installed nvidia driver 295.59 and also try with 302.17 to apt-update and upgrade, apt-get install build-essential linux-headers-$(uname -r), apt-get remove --purge nvidia*, apt-get remove --purge xserver-xorg-video-nouveau, vim /etc/modprobe.d/blacklist.conf blacklist vga16fb blacklist nouveau blacklist rivafb blacklist nvidiafb blacklist rivatv sh NVIDIA.run, sudo service lightdm start, reboot, nvidia-xorgconf 2)after reboot i get 800x600 and nvidia-settings say this. You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server. 3) i change a little bit xorg.conf to set up a resolution to work property 4) i dont have any image in the monito and i dont have any option on Nvidia X server settings lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [GeForce GT 520] (rev a1) egrep -i 'glx|nvidia' /var/log/Xorg.0.log [ 12.005] (II) LoadModule: "glx" [ 12.005] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 12.575] (II) Module glx: vendor="NVIDIA Corporation" [ 12.585] (II) NVIDIA GLX Module 302.17 Tue Jun 12 16:22:45 PDT 2012 [ 12.585] (II) Loading extension GLX [ 13.037] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found) [ 13.044] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event10) [ 13.044] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event9) glxinfo | grep direct Xlib: extension "GLX" missing on display ":0.0". Error: couldn't find RGB GLX visual or fbconfig sorry my english is no very well. and thanks guys

    Read the article

  • TCO Models: Oracle invites you to the next webcast dedicated to Partners on Oracle Hardware and Solutions

    - by mseika
    The Oracle Hardware and Solutions Webcast Series is a sequence of one-hour Sales-Oriented Web Seminars, dedicated to Oracle Partners. This is your opportunity to learn about Oracle's Servers, Storage and Solutions strategy and portfolio, and their business value for you and your customers. The next appointment is for Wednesday, June 22, at 9am UKT / 10am CET:Total Cost of Ownership Models Examples: How we can sell Oracle HW and SW together, with better TCO, and benefits for both Oracle and the Partner!with Ilkka Vanhanen, Business Development Manager, Oracle EMEA Hardware Strategy Organization, who will talk about:   Concrete examples of the HW/SW TCO Model   Understand the competitive advantage provided by Oracle-on-Oracle Solutions   How Partners get new business from Oracle-on-Oracle Solutions   How Oracle is changing the game in Enterprise IT   Key benefits for both SW Resellers and HW Resellers   To register click here , then click on the “Servers and Solutions Webcasts” tab.          

    Read the article

  • Unable to free space in /boot

    - by wadesworld
    Running: Linux ips-svf-1 3.0.0-22-server #36-Ubuntu SMP Tue Jun 12 17:56:20 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I'm trying to free space in /boot with apt-get -y purge, but every time I run the command I get an error about unmet dependencies: sudo apt-get -y purge linux-headers-3.0.0-12 Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-headers-3.0.0-12-server : Depends: linux-headers-3.0.0-12 but it is not going to be installed linux-image-server : Depends: linux-image-3.0.0-26-server but it is not going to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). However, I can't run apt-get -f install since /boot is full. I also tried running dpkg --purge and dpkg --remove manually, but both give the same unmet dependency error. Any suggestions on how I can successfully free space in /boot? Is there anything I can delete with rm?

    Read the article

  • How to set permalink of your blog post according to date and title of post?

    - by Amit
    I am having this website http://www.finalyearondesk.com . My blogs post link are set like this.. http://www.finalyearondesk.com/index.php?id=28 . I want it to set like this ... finalyearondesk.com/2011/09/22/how-to-recover-ubuntu-after-it-is-crashed/ . I am using the following function to get these posts... function get_content($id = '') { if($id != ""): $id = mysql_real_escape_string($id); $sql = "SELECT * from blog WHERE id = '$id'"; $return = '<p><a href="http://www.finalyearondesk.com/">Go back to Home page</a></p>'; echo $return; else: $sql = "select * from blog ORDER BY id DESC"; endif; $res = mysql_query($sql) or die(mysql_error()); if(mysql_num_rows($res) != 0): while($row = mysql_fetch_assoc($res)) { echo '<h1><a href="index.php?id=' . $row['id'] . '">' . $row['title'] . '</a></h1>'; echo '<p>' . "By: " . '<font color="orange">' . $row['author'] . '</font>' . ", Posted on: " . $row['date'] . '<p>'; echo '<p>' . $row['body'] . '</p><br />'; } else: echo '<p>We are really very sorry, this page does not exist!</p>'; endif; } Any suggestions how to do this? And can we do this by using .htaccess?

    Read the article

  • I just received a complaint from a user of the website I maintain. Should I do anything?

    - by Chris
    I was sent sent a large wall of text from a user of the website I maintain at my job. They are clearly upset for having to deal with a horribly outdated web application that has not seen any serious updates in over 6+ years. No refactoring has been done, the code quality is terrible, the security unchecked, policy compliances ignored, in addition to being ugly and frankly embarrassing. Keep in mind this is a small business but the website is used by hundreds daily. I'm one of two programmers there, and I've been working there for two years. This person says they are about my age (22) and understand technology (but can't use proper grammar). The complaint mentioned awkward pages and actions on the website, but they don't even have a clue as to the depth of the flaws in this website. Now, I would love to honestly tell them that there's a lot wrong with this company and that this application was built when we were in high school. And that while it's not my fault that the website is terrible, I'm the one in position to fix it. But on the other hand, I could just say nothing and ignore it. Would doing this publicly have any advantage to future employees (showing integrity) or would it just be a completely pointless mistake? Odds are, even if I respond only that one person will ever read it. Regardless, I'm probably just going to ignore it and continue starting my project to refactor the website.

    Read the article

  • M-Audio Delta 1010LT on 12.04

    - by user74039
    I have 12.04 64bit installed, my soundcard is a Delta 1010LT, it seems to be partially detected, I've been following steps here: https://help.ubuntu.com/community/SoundTroubleshooting/ lspci -v | grep -A7 -i "audio" shows this: 04:07.0 Multimedia audio controller: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller (rev 02) Subsystem: VIA Technologies Inc. M-Audio Delta 1010LT Flags: bus master, medium devsel, latency 64, IRQ 22 I/O ports at ec00 [size=32] I/O ports at e880 [size=16] I/O ports at e800 [size=16] I/O ports at e480 [size=64] Capabilities: <access denied> Kernel driver in use: snd_ice1712 aplay shows this: **** List of PLAYBACK Hardware Devices **** card 0: M1010LT [M Audio Delta 1010LT], device 0: ICE1712 multi [ICE1712 multi] Subdevices: 1/1 Subdevice #0: subdevice #0 In the sound settings on the desktop all I see is the ICE1712 S/PDIF, which I don't use, I want to use the individual outputs on the card, I'm not so bothered about inputs, I just want the playback for now. If I open alsamixer in the console, I see all of the output and input channels, i've raised the volume on them but I don't get anything in the sound settings on the desktop and when I play any sound, I hear nothing. Can someone help?

    Read the article

  • Advanced Exalytics, Endeca and OBI Training for Partners

    - by Mike.Hallett(at)Oracle-BI&EPM
    Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 In Sweden and in Saudi Arabia there will be the next set of hands-on advanced Exalytics, Endeca and OBI Training workshops for Partners: partners from any country may attend these. These are free of charge to OPN Specialised member partners, but are subject to availability (please do not attend unless you have received a confirmation from Oracle to do so). Check the workshop agendas and pre-requisites, and register from the links below: Exalytics and Business Intelligence Hands-on Workshop (3-days) August 24-26, 2013: Oracle Riyadh, Saudi Arabia September 3-5, 2013: Oracle Kista, Sweden Endeca Information Discovery Hands-on Workshop (3-days) October 22-24, 2013: Oracle Kista, Sweden Advanced Oracle Business Intelligence Hands-on Workshop (3-days) August 19-21, 2013: Oracle Riyadh, Saudi Arabia /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

    Read the article

  • How can I malloc an array of struct to do the following using file operation?

    - by RHN
    How can malloc an array of struct to do the following using file operation? the file is .txt input in the file is like: 10 22 3.3 33 4.4 I want to read the first line from the file and then I want to malloc an array of input structures equal to the number of lines to be read in from the file. Then I want to read in the data from the file and into the array of structures malloc. Later on I want to store the size of the array into the input variable size. return an array.After this I want to create another function that print out the data in the input variable in the same form like input file and suppose a function call clean_data will free the malloc memory at the end. I have tried somthing like: struct input { int a; float b,c; } struct input* readData(char *filename,int *size); int main() { return 0; } struct input* readData(char *filename,int *size) { char filename[] = "input.txt"; FILE *fp = fopen(filename, "r"); int num; while(!feof(fp)) { fscanf(fp,"%f", &num); struct input *arr = (struct input*)malloc(sizeof(struct input)); } }

    Read the article

  • Wired connection not working

    - by YokoBlac
    I am using a Acer Aspire One. Here is the Ubuntu Wiki Page about my computer. I have a working wireless connection however when I plug a cat5 (Ethernet) cable in the lights flicker on the computer, but then nothing happens. Output of iconfig: eth0 Link encap:Ethernet HWaddr 00:1e:68:96:1a:6b inet6 addr: fe80::21e:68ff:fe96:1a6b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:43 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2622 (2.6 KB) TX bytes:936 (936.0 B) Interrupt:28 Base address:0xe000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:480 (480.0 B) TX bytes:480 (480.0 B) wlan0 Link encap:Ethernet HWaddr 00:22:68:92:7f:36 inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::222:68ff:fe92:7f36/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5702 errors:0 dropped:0 overruns:0 frame:0 TX packets:5284 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4117327 (4.1 MB) TX bytes:936709 (936.7 KB) Any understanding of this output is greatly appreciated.

    Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >