Search Results

Search found 6473 results on 259 pages for 'borland together'.

Page 89/259 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

• openwrt uses a single interface bridge?

  - by timbo

  My understanding of bridging is that it ties together two interfaces at layer 2. I am looking at a Ubiquiti Nanostation2 running OpenWRT that has an ethernet port 'eth0' and a wifi port 'ath0'. The ethernet port (the 'wan' port) is not part of the bridge and the bridge is just a single interface. Can anyone clarify this? - seems very different to Ubuntu. /etc/config/network: config 'interface' 'loopback' option 'ifname' 'lo' option 'proto' 'static' option 'ipaddr' '127.0.0.1' option 'netmask' '255.0.0.0' config 'interface' 'wan' option 'ifname' 'eth0' option 'proto' 'dhcp' config 'interface' 'wifi' option 'ipaddr' '192.168.13.1' option 'type' 'bridge' option 'proto' 'static' option 'netmask' '255.255.255.0' option 'ifname' 'wifi0'

  Read the article

• Cant logon to domain over site-to-site vpn

  - by 3molo

  Tied together branch office with main office over two Cisco ASAs. The (internal) networks on either side can communicate with the other. I can ping, use the DC's DNS service and even join a domain on a new client. I can't however logon, I get the "domain controller is not available" error message on client. I find nothing peculiar in DC's event logs. Sicne it's site-to-site (with ping), it's always up so it should work. No firewall rules (except allow any any) between the two networks (of either side). Main site internal net: 10.10.10.0/24 Branch office net: 10.180.3.0/24 Am I overlooking something here? Where should I start investigating this?d

  Read the article

• Finding trends in multi-category data in Excel

  - by Miral

  I have an Excel spreadsheet that contains hundreds of rows of data that each represent a single sample in a larger population. Each row is divided into three columns that contain frequency counts of a specific type of thing. Together the three columns summed on a single row represent 100%, though each row will sum to a different value. What I'm most interested in are the proportions of each of these types (ie. percentages of each column relative to the sum of the three columns). I can easily calculate this on a per-row basis, but what I'm really interested in is trying to find an overall trend from the entire population. I don't really spend much time doing data analysis so the only thing I can think of trying is to create those percentage columns and then average them, but I'm sure there must be a better way to visualise this.

  Read the article

• Linux script to kill process listening on a particular port

  - by Evgeny

  I have a process that listens on a TCP port (?0003). From time to time it crashes - badly. It stops working, but continues hogging the port for some time, so I can't even restart it. I'm looking to automate this. What I do right now is: netstat -ntlp |grep -P "\*\:\d0003" To see what the PID is and then: kill -9 <pid> Does anyone have a script (or EXE for that matter) that would link the two steps together, ie. parse the PID from the first command and pass it to the second?

  Read the article

• How to test if SYN and FIN are both dropped at the same time in hping3?

  - by snow

  One of the rules to prevent unexpected attack is to prevent SYN & FIN being used together. SYN and FIN are both set $IPT -A INPUT -p tcp --tcp-flags SYN,FIN SYN,FIN -j DROP How do I use hping to test if this iptable rule works? hping3 192.168.7.0 --keep -S -F??? Is this complete? When just type iptables -L, it shows: Chain INPUT (policy DROP) target prot opt source destination ACCEPT all -- anywhere anywhere DROP tcp -- anywhere anywhere tcp flags:FIN,SYN/FIN,SYN WHY do I need to put the "SYN,FIN" twice before drop? Is it because one for source and one for destination?

  Read the article

• Connect to internet through DC with 2 network interfaces

  - by Ali Foroughi

  I have a network like this : Client 1 <== Wireless ==> Access Point <== Wire ==> DC <== Wireless ==> ADSL Modem Client 1 : IP : 192.168.1.181 DG : 192.168.1.100 DNS : 192.168.1.100 Access Point : IP : 192.168.1.10 DG : 192.168.1.100 DC : IP : 192.168.1.100 DG : 192.168.1.1 DNS : 127.0.0.1 ADSL Modem : IP : 192.168.1.1 I can ping yahoo.com from client1, but cannot browse the internet. UPDATE1 : my DC has two network interfaces that I bridge together. UPDATE2 : I powered down the DC firewall UPDATE3 : I set a forwarder for my DC to 8.8.8.8 (Google dns)

  Read the article

• Windows 7 User / Documents and Settings folders

  - by Kip

  Yo, I have a machine - Windows 7, nothing remarkable about the install but i have multiple drives in the machine. I have a c:\users\username folder which seems to be current and is the one that all windows properties point to. However, i also have a f:\documents and settings\username folder (which was hidden) which is also current and up to date. If i edit anything from either, they seem to "replicate" or update each other ie if i rename an icon on my desktop, it renames it in c:\users\username\desktop and f:\documents and settings\username\desktop. Likewise if i edit directly in one of those folders, it does the same to the other. Any one got any ideas what might cause this? Problem i have is that I need to remove the f drive all together! Thanks in advance

  Read the article

• Digital audio input on Macbook?

  - by Ken

  I have: a Macbook (not Pro), don't know the exact model but it's a Core 2 Duo 2.0GHz and probably what Wikipedia calls the "Late 2006" or "Mid 2007" model a DVD player, region-free, that has "Coax and TosLink optical digital audio outputs" I want to make an MP3 of the audio track of some DVDs (for learning a new language), and I can't use the Macbook's built-in DVD drive because it's a different region (ugh!). I'm sure I can connect the DVD player to the Macbook with an analog audio cable. However, if it's possible I'd prefer to keep the signal digital. I'm not even positive if my old Macbook has digital audio in, and if so what I need to connect to it. (I've done plenty of home audio geeking, but always in analog!) Will a "Toslink cable" plus a "Toslink Female to Mini-Plug Male Adapter" (found on Amazon) let me connect my things together? It looks like the pieces will fit but I'd like to hear someone confidently knowledgeable on the matter before I buy something. Thanks!

  Read the article

• Automatically keeping two excel data tables in-sync (w/out VBA)

  - by Neil

  I'm putting together a workbook for tracking a stock portfolio. The primary sheet contains a table with the list of the transactions. From this I would like to create an overview table on another sheet with only one row per unique stock symbol that includes things like cost basis, returns, etc. The problem is that nothing I've tried updates the overview table correctly when rows are added to the transaction table. The closest I've got is something like the following: http://www.get-digital-help.com/2009/04/14/create-a-unique-alphabetically-sorted-list-extracted-from-a-column/ However, this requires applying that formula to every cell in the primary column of the overview sheet. And even then the range of the table isn't extended down to include new rows as they become valid. Essentially I'm looking for a way that auto-adds rows to a table and copies the formula based on a different table changing without using VBA. Trivial example data Sheet1 Symbol Type Shares Price F Buy 100 12 MSFT Buy 100 25 MSFT Sell 50 28 F Buy 100 16 Sheet2 Symbol Quantity F 200 MSFT 50

  Read the article

• MediaShield RAID 5 is showing up as 760GB when the actual size is 2.7TB

  - by Ilya Volodin

  I just finished setting up Windows 2003 Server on my new server. And I started setting up a RAID 5 for it. I have 4x1TB Hard Drives. From MediaSheild RAID Utility (at boot time) the RAID size is displayed as 2.7TB. Linux also shows it as 2.7TB. However, in Windows, everything (including Windows Disk Management as well as Windows based MediaShield utility) is reporting only 760Gb. I already tried converting partitioning table to GUID from MBR, because I read somewhere that Windows can only handle up to 2TB MBR tables, that didn't help much. Tried searching for partitioning utilities that I could use, but couldn't find anything free. Formatted the disk as NTFS partition from within Linux, it stop showing in Windows all together, even MediaShield windows utility isn't showing at anymore. Windows is installed on a separate 500Gb hard drive, that's setup not to support RAID. Any ideas?

  Read the article

• Server Room Protocols/Server Room Management

  - by Matthew E

  Hi, I'm new to this site but have found the articles and feedback very useful. We have a Server Room which our Organisation owns and controls, yet there are several thirs party companies that have open access to this room. As such, we have been asked to put together a protocol paper that stipulates the standards that we expect to be adhered to when working in this room. Other than the monitoring of UPS loads, Air Cooling functionality, alarm systems etc, does any one have any guidance on the kind of issues that need to be documented to make this protocol all encompassing? I'm thinking along the lines of not leaving cardboard or other combustibles in the room, not having food and drink in the room, not altering the fabric of the building by drilling through walls etc? Many thanks in advance for any guidance provided.

  Read the article

• What are some topics you'd like to see covered in an 'Introduction to Network Security' book?

  - by seth.vargo

  I'm trying to put together a list of topics in Network Security and prioritize them accordingly. A little background on the book - we are trying to gear the text towards college students, as an introduction to security, and toward IT professionals who have recently been tasked with securing a network. The idea is to create a book that covers the most vital and important parts of securing a network with no assumptions. So, if you were a novice student interested in network security OR an IT professional who needed a crash course on network security, what topics do you feel would be of the upmost importance in such a text?

  Read the article

• Replace an IP address with it's whois using bash

  - by user2099762

  I have a traffic log similar to this "page visited" for xxx.xxx.xxx.xxx at 2013-10-30 and I would like to replace the ip address with the result of it's whois lookup. I can export the ip addresses to a separate file and then do a whois on each line, but im struggling to combine them all together. Ideally i'd like to replace the ip address in the same string and print the new string to a new file. So it would look like "page visited" for example.com at 2013-10-30 Can anyone help Here's what I have so far grep -o '[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}' clean_cites.txt > iplist.txt for i in `cat iplist.txt` do OUTPUT=$(geoiplookup -f /usr/share/GeoIP/GeoIPOrg.dat $i) echo $i,$OUTPUT >> visited.txt done Like I said,this produces a separate file with a list of ip addresses and their relevant hostnames, so I either need to search for the ip address in file and and replace it with the text in file b (which will give the ip address and hostname) or replace the ip address in place. Thanks

  Read the article

• Getting back the old alt-tab windows switching behavior in Windows 7?

  - by Carlos A. Ibarra

  When you run more than 6 applications on Windows 7 and you press alt-TAB, icons representing the first 6 applications and the desktop appear on the first row of the grid and you can cycle with alt-TAB-TAB... through the 6 most recently used windows the usual way, but the 7th and other less recently used windows don't follow the same rules. Instead they get grouped together according to their application but disregarding whether they were recently used or not. This new behavior is mentioned here. I am very used to the old way of cycling and the new system is driving me crazy. I tend to have 20 or so windows open at one time and I frequently need to alt-tab to the 7th or 8th window on the stack but it doesn't work the same anymore. Does anyone know how to put back the old behavior, so that alt-tab-tab-tab... goes through the whole list in most-recent to least-recent order?

  Read the article

• active directory servers synchronization

  - by Mit Naik

  I have 3 AD servers with windows server 2008 R2 at 3 different places, main server is at datacenter and 2 are in our local office which are at 2 different place. I want to synchornize all the 3 server together, were datacenter server should be central server and rest 2 servers should synch with the datacenter server. Please provide us the steps or tutorial to do this. Also we want that once the changes are done in 1 of the AD server the changes are automatically done in all the servers. For example if I change the password of user in our local server it should be updated in our main AD server and other branch server too. Please provide us the steps or tutorial to do this asap. I have one more question I have already created main datacenter AD as domain.local and other domains as xyz.local and abc.local, how can I replicate the additional AD domains with main datacenter DC, also do we require VPN connection, is there any other way to replicate the servers without using VPN connection?

  Read the article

• getting input/output error from NFS client on RHEL5

  - by Andrew Watson

  i have two RHEL5 boxes on a private network together (192.168.2.0/24) and I am trying to export a file system from one to the other but I keep getting the following error: mount.nfs: Input/output error on the client side I see this output: mount: trying 192.168.2.101 prog 100003 vers 3 prot tcp port 2049 mount: trying 192.168.2.101 prog 100005 vers 3 prot tcp port 960 and on the server side I see this: Sep 20 14:14:32 omicron mountd[18739]: authenticated mount request from 192.168.2.87:635 for /srv/nfs/web (/srv/nfs/web) but that's all. I opened up iptables so that the whole 192.168.2.0/24 network is allowed to communicate freely but the public side is locked down to 22,80 etc.... any ideas?

  Read the article

• SASL + postfixadmin - SMTP authentication with hashed password

  - by mateo

  Hi all, I'm trying to set up the mail server. I have problem with my SMTP authentication using sasl. I'm using postfixadmin to create my mailboxes, the password is in some kind of md5, postfixadmin config.inc.php: $CONF['encrypt'] = 'md5crypt'; $CONF['authlib_default_flavor'] = 'md5raw'; the sasl is configured like that (/etc/postfix/sasl/smtpd.conf): pwcheck_method: auxprop auxprop_plugin: sql sql_engine: mysql mech_list: plain login cram-md5 digest-md5 sql_hostnames: 127.0.0.1 sql_user: postfix sql_passwd: **** sql_database: postfix sql_select: SELECT password FROM mailbox WHERE username = '%u@%r' log_level: 7 If I want to authenticate (let's say from Thunderbird) with my password, I can't. If I use hashed password from MySQL I can authenticate and send an email. So I think the problem is with hash algorithm. Do you know how to set up the SASL (or postfixadmin) to work fine together. I don't want to store my passwords in plain text...

  Read the article

• Laptop Touch-pad stops working after reattaching parts

  - by kb67

  I was trying to replace my LCD screen for the first time, and it was a very hard process to do. I had to unscrew everything from the bottom of the laptop (Ram, HD, etc) and detach everything that was under the keyboard. After reattaching the LCD, putting everything back together, the touch-pad has stop working. Everything works except for that. Anybody know why it stopped working? I have an HP G61-429WM Laptop. Sorry if this was the wrong place to ask.

  Read the article

• Setup a DNS wilcard and MX record in the same zone

  - by Nicolas BADIA

  I'd like to know how to configure my DNS to be able to use a wildcard for my domain and an MX record together. Here is what I've done: @ IN SOA dns100.ovh.net. tech.ovh.net. (2012052100 86400 3600 3600000 300) IN NS ns100.ovh.net. IN NS dns100.ovh.net. IN MX 1 mail.gestixi.com. IN A 91.121.39.211 * IN CNAME gestixi.com. www IN CNAME gestixi.com. The problem is that when I check my DNS, I get this error: MX records shall not point to an alias defined by a CNAME Because of this error, it look like I can't send mails from some internet providers.

  Read the article

• Netgear FVX538v2 slow whene connected to Canoga Perkins N525 ETSU

  - by Doomloard

  First of all thank you in advance for helping me. my issue is the old network admin found a problem whene he connected the firewall and the ETSU together the through put went down to less than 1 mega bit a second. his fix was to add a dlink router between the firewall and the etsu which speed it up to 5 mega bits a second. now my boss wants a more clean and proper solution if possible. i have check all the settings in the netgear it dose not seem to be a setting issue. if anyone can help that would be great.

  Read the article

• Connecting HDMI MediaCenter PC to Standard Def TV

  - by Adam

  I just purchased a ASRock ION 330-HT-BD to use as my new Media Center. Sadly I still have a crappy standard-def old tube TV for the foreseeable future. The TV has Coax & Composite (Red, White, Yellow) inputs, and my new MediaCenterr has HDMI & VGA outputs. So my question is, how do I hook up the two together! All of the HDMI-to-Composite cables I have found explicitly state that they can not be used to hook a PC up to a TV. Any ideas?

  Read the article

• Combine Multiple Audio Files into a single higher-quality audio File

  - by namenlos

  BACKGROUND My team gave a demo to a large audience - we recorded the audio of the demo in multiple locations in the room (3) the audio was recorded using cheap laptop microphones I was not involved in the recording of the audio or the demo Both audio files suck in some form the first one is of a recording near the speaker - which clearly gets his voice but the the audience is audience is muffled - also this one is slightly noisy The second recording was done in the middle of the audience - it gets the audience questions clearly but actually gets the speaker rather sometimes well and sometimes poorly (not all the speakers spoke loudly enough to be heard) MY QUESTION Is there any techinque or software which can be used to merge these audio files in such a way that the best qualities of each are preserved. I am NOT asking now to simply merge them together in one track - I've already done that in Audacity and it is certainly better - what I am looking for could be considered closer to how HDR images are created - multiple exposures combined into an enhanced new version which is not simply an average of the inputs. NOTE Am not an "Audio" guy - just a normal user

  Read the article

• Virtualbox PXE Boot Failing with a Windows Server 2008 R2 Server

  - by Vbitz

  Some fast help on this would be good, I have been on this problem for 14 hours. In a Virtualbox test environment I have 2 virtual machines networked together using a internal network (no traffic runs though the host, it is all at a software level). One is a fresh client with 512mb of ram and a dual core set-up, the other is the server with 1.5GB of ram and running server 2008 r2. The server is configured as a dns server, dchp server, domain controller and also serves PXE booting though WDS (Windows Deployment Services). Both machines can see each other and I am able to start a network boot. The issue comes at the second to last stage of the pre windows PE install. On TFTP download of boot.sdi it starts it but stops during the boot process.

  Read the article

• Is there any way to use the xscreensaver gltext to monitor system information?

  - by Shane

  I am trying to get the X screensaver gltext to monitor my system temp and maybe some other stats. Writing a script that puts together the stats periodically is no problem, but the main thing I'm running into is that gltext doesn't refresh - whatever text I feed it stays there. So, for example, I run this command: $ /usr/lib/xscreensaver/gltext -text "`cat /proc/acpi/thermal_zone/THRM/temperature`" and get a gltext window showing: temperature: 60 C I can manipulate it and format it as necessary, but as my CPU heats up and cools down, it doesn't update, even if I include time variables that do. I have a script that feeds gltext the time as the first line and the temp as the second line - and although the time updates continuously as the time changes, the temperature value remains the same as whenever the screensaver started. Is it possible to do what I want, which is change the text every 60 seconds if the temperature changes?

  Read the article

• Help me a routing server on Windows XP

  - by Lu Lu

  I am developing client/server applications and need to test them on Internet environment. However, I only have one PC without connecting the public internet, so I have a plan to simulate a virtual internet environment on my PC. I think I will install the virtual machines for my purpose, but I can install only one machine because of my slowly PC. At the moment, my PC has 2 machines: the host machine (use Windows XP) & the virtual machine (use Windows Server 2003 Ent). Each machine will have 2 network adapter (host-only & internal), and in 2 network adapters, the internal adapter is private on each machine, and host-only adapters are connected together. With Windows 2003, routing server is ok, but I wonder on Windows XP, are there any routing server product? Please help me. Thanks.

  Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >