Search Results

Search found 3293 results on 132 pages for 'comodo firewall'.

Page 89/132 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

  • IPV6 causing issue with DNS

    - by Mike Wells
    I have set up an 'internal' DNS at my work, basically we have ourdomain.com that is for internet, email etc and I have created on one of our linux network servers (debian) a DNS using bind9 with the domain ourdomain.inc. So based on my files below and the symptoms I'm describing; what effect could IPV6 be having on my setup? What can I do to fix this? I assume it is not actually the IPV6 causing the issue, but rather something in my setup. These are the critical (I think) files I have modified: named.conf.local zone "ourdomain.inc" { type master; file "/etc/bind/zones/ourdomain.inc.db"; }; zone "201.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.201.168.192.in-addr.arpa"; }; named.conf.options options { directory "/var/cache/bind"; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. forwarders { 1.2.3.4; //IP of our external DNS provider }; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; ourdomain.inc.db $TTL 86400 ourdomain.inc. IN SOA ns1.ipower.com. admin.ourdomain.inc. ( 2006081401 28800 3600 604800 38400 ) serv1 IN A 192.168.201.223 serv2 IN A 192.168.201.220 serv3 IN A 192.168.201.219 ns1.ipower.com. IN A 1.2.3.4 ns2.ipower.com. IN A 1.2.3.5 @ IN NS ns1.ipower.com. @ IN NS ns2.ipower.com. svn IN CNAME serv1 docs IN CNAME serv2 jira IN CNAME serv3 confluence IN CNAME serv3 fisheye IN CNAME serv3 rev.201.168.192.in-addr.arpa $TTL 86400 201.168.192.in-addr.arpa. IN SOA ns1.ipower.com. admin.ourdomain.inc. ( 2006081401; 28800; 604800; 604800; 86400 ) 223 IN PTR serv1 @ IN NS ns1.ipower.com. @ IN NS ns2.ipower.com. named.conf include "/etc/bind/named.conf.options"; include "/etc/bind/named.conf.local"; include "/etc/bind/named.conf.default-zones"; I then made our internal DNS my preferred DNS with the two external DNSs the next in-line. More the most part this seems to work, I can ping svn.ourdomain.inc and it resolves to the correct IP, I can also ping google.com and it also resolves no problem. So all seem good. However, periodically (couple of times a day at least), I loose the ability to ping the svn.domain.inc (and all others defined under the internal DNS). What seem to fix the issue temporarily is to disable IPV6 on the network adapter of the client machine and then re-enable it. Then it works for a bit but will always fail again. System Info Internal DNS Distributor ID: Debian Description: Debian GNU/Linux 6.0.6 (squeeze) Release: 6.0.6 Codename: squeeze Linux 2.6.32-5-686 i686 BIND 9.7.3 PC OS Name: Microsoft Windows 7 Professional OS Version: 6.1.7601 Service Pack 1 Build 7601 System Type: x64-based PC Network Card(s): 2 NIC(s) Installed. [01]: Realtek PCIe GBE Family Controller Connection Name: WORK LAN DHCP Enabled: No IP address(es) [01]: the.ipv4.address [02]: the:ipv6:address The question... So based on my files above and the symptoms I described; what effect could IPV6 be having on my setup? What can I do to fix this? I assume it is not actually the IPV6 causing the issue, but rather something in my setup.

    Read the article

  • HTTP, HTTPS and FTP is not working but SMTP and IMAP are working.

    - by nWorx
    Yesterday on a computer of a friend a strange thing happened. after booting the ports fo http, https and ftp are closed but e-mail is still working. in the control panel the windows firewall seems active even if he tries to deactivate it. I have a suspision that it is the faul of norton internet security 2010, we have tried to uninstall it, but the uninstallation did not work. when using the removal tool from symantec it just goes to 23% and then it crashes. the process ccSvcHst.exe is still running. How can I safely remove the rest of Norton Internet Security? Edit: Norton Internet Security 2010 is sucesfully removed, but still no connectivity...

    Read the article

  • ssh into my mac from my ipod

    - by mechko
    Ok so this is what I got, but it don't look right... The set up is as follows: My Mac is on a wireless network, presumably behind a firewall over which I have no admin privileges. Further, said wireless network changes my internal IP randomly at random times, so I do not know what my ip is. Note that localhost is a variable ip I forward some port or the other to my dns: ssh -R 19999:localhost:22 sourceuser@remotehost connect to my remotehost from my machine: ssh sourceuser@remotehost and then connect to the port I forwarded: ssh localhost -p 19999 [solved] Second question, there are a bunch of ssh clients for the iphone. Which one should I use? EDIT: Since jailbreak is not illegal, simply frowned upon by the Corporation, I've decided to go with that. I have a nice shell with openssh and the works. Best of all, it's free and it does exactly what you expect.

    Read the article

  • TS connection lost but not local

    - by Owl
    I have an office that is connected to a shared db server and terminal services server, that other offices use as well, through a vpn tunnel. For some reason all workstations in the office will lose connectivity to the remote address but will remain connected to their local internet. I have checked both firewalls to ensure all settings match accordingly. They seem to go down at routine times every day and it doesn't last longer than a minute or two. Any ideas of what this may be? OS: Windows Server 2003R2 Terminal Services 5.2 Symantec Gateway 320 & Symantec Firewall/VPN 100

    Read the article

  • Set Valid IP On Vmware Vm's Help Please

    - by Shahin At
    I Have a VPS.And i on my vps installed vmware workstation version 9.now i have 3 valid ip's: XXX.152.193.66 XXX.152.193.101 XXX.152.193.103 Gateway: XXX.152.193.65 now tow ip's set in host and i want to 1 ip set on vm. network vm is bridge and set ip on vm but this ip from out of internal network not ping and in vm not ping to gateway. What can I do to solve this problem? my ip is unassigned and only set on vm and use bridge network mode.and gw,mask,dns is set.but not ping. i set this ip on host and without problems is worked, But I do not know why on vm not worked. my host OS Is Windows Server 2003 and firewall is off and RRAs(routing and remote access) For VPN service is Enable. Do not host or virtual machines to create a IP route?

    Read the article

  • Why do most routers not include local DNS?

    - by user785194
    I need to change my firewall/router, and I'd prefer something with built-in DNS to resolve queries on the local subnets. I've got a mixed Linux/Windows system, often with only one computer turned on, and I frequently have problems resolving local names. I don't want to keep a Linux box permanently on just for DNS, and I'd prefer to have DNS in my router appliance, which is always on. I search Google for this occasionally but never find anything. You always get the obvious answers - it's not possible, put everything in /etc/hosts, NetBIOS, dedicated box, etc. So what am I missing? Why don't "cheap" routers let you do this? I'm pretty sure that Cisco kit does this. Almost all cheap routers will let you do MAC address reservation, to let them assign static IP addresses for DHCP. So why can't they simply do DNS as well for everything on the local subnets, just passing through remote domains to the ISP?

    Read the article

  • Fresh Apache install can't be connected to

    - by Wayne M
    I've got to be missing something here. I have a brand new CentOS server with a LAMP install on it. My domain host (GoDaddy) has the server's IP address configured as the "A Record". Since the server will host subdomains I have enabled NameVirtualHost and set up a virtual host pointing to the web app on the server. I haven't touched anything else in Apache, and it's listening on Port 80 like it should be. However, I can't connect to the server either by DNS or by IP address. I've set up several servers exactly like this one and never run into this before. What could be causing this? Did someone on the host set up a firewall or something that blocks port 80? As I said, I can't connect to the server via anything, but it's a barebones box with LAMP installed on it.

    Read the article

  • cannot access my own computer through My Network Places

    - by WebMAOhist
    My home Windows XP Pro SP3 machine is DHCP client receiving configurations from ISP. Trying to access in WindowsExplorer -My Network Places - Microsoft Windows Network shows Workgroup with a delay of 3 min and then popups messagebox: Microsoft Windows Network Workgroup is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The list of servers for this workgroup is not currently available OK I am logged-in as local machine Administrator. The internet is accessible (I am writing this post through it) The Firewall is disabled The "Computer Bowser" and all networking services, I could find, are running Control Panel -- Network Connections -- Properties (of connection) --- Internet Protocol (TCP/IP), btn Properties --- --- tab General, btn "Advanced..." -- tab WINS-- rbtn "Enable NetBIOS over TCP/IP" checked Why cannot I access my own PC (and shares on it) through My Network Places What is the possible problem? How to daignose the problem?

    Read the article

  • Broadband Traffic Question

    - by rutherford
    I have a broadband ADSL line with plus.net in the UK. Having checked the modem there is no firewall or any weird features enabled. But since I arrived at the apartment (the broadband already being installed), I cannot log into Twitter nor update any of my wordpress blogs (I can browse them and log in, but cannot save any edits or new posts). It only seems to affect these two sites in their unique ways. If I take the netbook I use in this place out to say a McDonalds or some other wifi access point then these sites work fine again. Anyone know what could possibly be preventing access of the pages in question? The only thing common to these pages are the POST response they are expecting. But POST form submission works fine on other sites...

    Read the article

  • What to do if people can't ping me?

    - by slayerIQ
    Today, I installed my new router so I can connect my other pc and my ps3. In my network, there are some other computers these are connected with each other through another router. So I have one modem with 2 routers that make up my network. Everything works fine the only problem I am having is being pinged by other computers in the network. All the computers are on the same subnet 255.255.255.0. There is no problem with my firewall or anything I tested everything. How can I solve this?

    Read the article

  • routing weirdness - traceroute 'vanishes' en route

    - by The Journeyman geek
    I'm attempting to set up one of my boxes as a server (again), but i'm having some odd connection issues- the box itself connects fine to the internet, but trying to connect to my external ip address seems to result in the trace getting 'lost' partway. http://pastebin.com/HCQAGbvn - this is a traceroute from another system that's connected to another ISP - starhub is my own one, while i have another system that i have access to on singtel. I'm wondering if my ISP is messing around with routing, or is something very odd going on. As you note, the traceroute dosen't reach me, but if it helps, i use a dd-wrt router. edit: Facepalmishly, turning the firewall on my router on and off fixed it. I don't get why it dropped off at different ip addresses each time, or why the router set it self to block.. everything, or why it affected the ipv6 tunnel as well.

    Read the article

  • Can Ping but Cannot Telnet directly to SQL Server 2012 Cluster Nodes

    - by tresstylez
    We have a monitoring tool (Solarwinds Orion) that needs to connect to a 2-node failover SQL Server Cluster. For reasons outside of our control -- we cannot monitor the CLUSTER IP directly at this time, so we have fallen back to monitoring each cluster node IP directly. This is not working. Upon troubleshooting, we tried to test that the cluster node was listening on the proper (fixed) port by using telnet to the cluster node IP/port -- and the telnet failed. However, telnet'ing to the Cluster IP/Port was SUCCESSFUL! Each node has its own IP. Each node is listening on the identical FIXED port. Each node has Dynamic Ports disabled. Each node can be PINGED successfully from the monitoring tool. Windows Firewall is DISABLED. How can I troubleshoot why I cannot telnet to the listening port on the cluster nodes?

    Read the article

  • Does Apache 2.2 (windows) have any default bandwidth limit?

    - by igino manfre'
    I'm running Apache on a server in cloud (Windows server 2008 R2 on VMware, 1 Gbps of BW, http://95.110.164.61 ). I'm streaming many live DVB MPEG Transport Stream, precompressed in loop, (not flash) generated by VLC on port 640xx and then reverse proxied by Apache on port 80. The server's firewall is open for VLC and Apache on all ports. Above 1.5 Mbps the reproduction is affected by continous stop & go. Please note that if you request a stream generated by VLC directly at http://95.110.164.61:64087/mpg2_6.4 you see a correct stream, while if you request http://95.110.164.61/mpg2_6.4 you do not. I know that Flash streaming Server uses Apache to stream on port 80 (and it works). I'm not an expert with Apache, can anyone tell me if any "special" module is required to increase the bandwidth?

    Read the article

  • What is the best way to auto failover to backup WAN link for web server

    - by user66735
    Hi Iam looking for the best way to ensure my server ( application ) remains available for all my users (on web/LAN/WAN ), when my primary ISP link fails. My server is behind a firewall on which both my primary & secondary links land. I have already assigned multiple IPs (both ISP's static IP) to the 'A' record ( host.example.com ) in the DNS. However in a round robin scenario is there a way I can ensure that my web user will not see a "cannot dislay web page" error ever ?? What are the better methods to achieve this??

    Read the article

  • Trying to get a new user up on pfSense IPSec VPN; Config file import failed, now getting gateway err

    - by Chris
    Caveat: I am not a sysadmin, so please forgive the n00bness of the query. We have a new user and I'm trying to get them up on VPN. We use pfsense as an IPSEC endpoint. This person is using Shrewsoft for the client. I had created an entry in pfsense for them and then edited a previous user's config file. Shrewsoft didn't import the config file very well and I had to hand edit the information. Now we are getting gateway errors. One thing I've noticed is that there is a different between the values of the preshared key stored on the firewall and the psk stored in the config file. I assume it has something to do with a hash, but I've no idea if that's the case and whether that might be what's causing the problem. Any suggestions greatly appreciated! Tangentially, is there some software used to generate these config files?

    Read the article

  • What are the essential considerations for setting up systems in a location with unreliable power?

    - by dunxd
    I deal with a lot of remote offices located in parts of the world where the local grid power supply is unreliable. Power can go off anytime with no warning, with outages ranging from minutes to days Power fluctuation is wild, with spikes and brown outs Currently the offices will have some or all of the following: A generator, with an inverter, or some sort of manual switch A big UPS or battery array connecting a number of devices Several smaller APC UPS with computers attached Low cost Voltage Regulators sometimes connected between mains and UPS or device. I know that each of these things needs to be appropriately rated for the equipment to which it is connected (although I am not sure how to calculate the correct rating). The offices will generally have the following equipment (in varying quantities): some sort of internet connection device (VSAT router, ADSL modem, WiMax router) Cisco ASA 5505 firewall a bunch of PCs printers one server I don't seek to replace the advice of an electrician, but in some of these locations they only answer the questions you ask them, so I need to make sure I have enough understanding of the essentials to protect equipment from damage, and possibly get through some power cuts.

    Read the article

  • Why are some UDP packets getting blocked?

    - by Tom
    In our organization, we have two test machines running Windows XP. While attempting to test a roll-my-own UDP message server, I found that both could receive small messages (under 2k) just fine. However, when I test sending large packets to both of these machines, one receives them fine, while the other can't receive them at all. Both machines have SP3 and both have their Windows Firewall shut off, but one still isn't working. Can anyone tell me where to look for anything that might be blocking or limiting the packet size on a Windows Machine? Thanks.

    Read the article

  • Remote desktop won't connect to Win7 Vmware Virtual machine

    - by Rodniko
    created a Virtual machine using VMware. The VM is on and i succeeded to login and work on it with the Vmware console. now i want to use the "remote desktop connection" to connect to it. i enabled the remote access on the home premium Win7 that i installed on the VM. in the Remote Desktop i entered the ip (same network (home network))). it just won't connect. i also disabled the firewall on the Win7 , but it still won;t connect. i have another VM with the same Win7 that remote desktop works fine with.

    Read the article

  • I have a wireless Canon P560 and my computer can't find it

    - by ed
    The printer is wireless and I haven't connected it via USB. I set the configurations for the Wi-Fi access point in the printer and it connected to my Wi-Fi. I have AT&T as the service provider and the 2Wire router. When I access the router in the browser I see that the printer is connected but when I run the software to detect the printer the computer can't find it. I have a Mac with Snow Leopard. I tried to detect the printer with another device and it can't find it. Is there a port that needs to be open for wireless printers? Because I tried putting the routers firewall settings for the device to its lowest and the computer still can't find it. Let me know. Thnx.

    Read the article

  • Windows VPN - NO internet access

    - by sharru
    I host a network of servers behind a Fortigate 200a firewall in the DC. I connect to those servers via a VPN connection. The problem is that when i connect to the VPN, I lose my internet connection on the local PC (windows 7). I would like to be connected to the VPN and still surf the web. i guess this means to only forward a range of ip to the VPN connection. I've read other answers on serverfault, talking about "un-check the 'Use default gateway on remote network' option in your Windows 7 PPTP network connection settings". When i do that , i get internet access but no access to the servers in the VPN. Any idea how to get both working? Should i change something on the fortigate 200a config? Do i need two networks cards? Is there a place in windows to define ip range for the vpn connection?

    Read the article

  • Log with iptalbes which user is delivering email to port 25

    - by Maus
    Because we got blacklisted on CBL I set up the following firewall rules with iptables: #!/bin/bash iptables -A OUTPUT -d 127.0.0.1 -p tcp -m tcp --dport 25 -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 25 -m owner --gid-owner mail -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 25 -m owner --uid-owner root -j ACCEPT iptables -A OUTPUT -p tcp -m tcp --dport 25 -m owner --uid-owner Debian-exim -j ACCEPT iptables -A OUTPUT -p tcp -m limit --limit 15/minute -m tcp --dport 25 -j LOG --log-prefix "LOCAL_DROPPED_SPAM" iptables -A OUTPUT -p tcp -m tcp --dport 25 -j REJECT --reject-with icmp-port-unreachable I'm not able to connect to port 25 from localhost with another user than root or a mail group member - So it seems to work. Still some questions remain: How effective do you rate this rule-set to prevent spam coming from bad PHP-Scripts hosted on the server? Is there a way to block port 25 and 587 within the same statement? Is the usage of /usr/sbin/sendmail also limited or blocked by this rule-set? Is there a way to log the username of all other attempts which try to deliver stuff to port 25?

    Read the article

  • Connect iPad to windows 7 VPN

    - by Linuz
    My iPad keeps spitting out the error: "A connection could not be established to the PPP server." I am trying to connect it to a VPN I set up with Windows 7 as an incoming connection. On the iPad, I went into the VPN settings, added a new PPTP VPN with the following information Server: Windows 7 Computer's IP RSA SecurID: OFF Account: Account Username Password: Account Password Encryption Level: Auto Send All Traffic: ON Proxy: Off Now I know that it is making some connection to the Windows 7 Computer because whenever I intentionally put in the wrong VPN password on the iPad, it makes me put in the correct one before trying to connect again. All the ports are forwarded on my router for PPTP, and my Windows 7 Firewall is even off to try to get this to work. Any help would be greatly appreciated, thanks.

    Read the article

  • ISA Server transforming urls

    - by JohnyD
    I'm not sure if this is possible or not or whether it should be done through ISA 2006, DNS or IIS. In our organization we have domain1.com and domain2.com. Domain2.com is old as the hills but we still need to support it. Is it possible to translate all requests from domain2.com to domain1.com. For example: Client requests: http://www.domain2.com/someprofile.asp?param=1 url is transformed into http://www.domain1.com/someprofile.asp?param=1 Firewall is ISA Server 2006 running on Windows Server 2003. DNS is Windows Server 2003. Webserver is IIS 6. Thank you

    Read the article

  • PPTP: Linux clients unreachable

    - by Bahman
    I have setup a PPTP server on a CentOS 6 box. Several clients (Windows and Linux) connect to this server. All clients use the same subnet. All clients (Win or Lin) can surf the Internet using the VPN successfully. Windows clients can ping any other Windows client (XP/Vista/7) connected to VPN. Linux clients (KVPNC) can ping any Windows client (XP/Vista/7) connected to VPN. So far so good. But there's this weird problem and I've been trying to figure it out with no luck: No client can ping (reach) a Linux client (successfully) connected to VPN. And yes, the firewall is completely disabled. I'd really appreciate any hint/idea. TIA, EDIT: The ultimate goal of this is to share services across the VPN, like accessing a HTTPD running on a Linux box from a Windows client.

    Read the article

  • OpenVPN IPv6 over IPv4 tunnel

    - by user66779
    Today I installed OpenVPN 2.3rc2 on both my windows 7 client machine and centos 6 server. This new version of OpenVPN provides full compatibility for IPv6. The Problem: I am currently able to connect to the server (through the IPv4 tunnel) and ping the IPv6 address which is assigned to my client and I can also ping the tun0 interface on the server. However, I cannot browse to any IPv6 websites. My vps provider has given me this: 2607:f840:0044:0022:0000:0000:0000:0000/64 is routed to this server (2607:f840:0:3f:0:0:0:eda). This is ifconfig after setup with OpenVPN running: eth0 Link encap:Ethernet HWaddr 00:16:3E:12:77:54 inet addr:208.111.39.160 Bcast:208.111.39.255 Mask:255.255.255.0 inet6 addr: 2607:f740:0:3f::eda/64 Scope:Global inet6 addr: fe80::216:3eff:fe12:7754/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2317253 errors:0 dropped:7263 overruns:0 frame:0 TX packets:1977414 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1696120096 (1.5 GiB) TX bytes:1735352992 (1.6 GiB) Interrupt:29 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00 inet addr:10.8.0.1 P-t-P:10.8.0.2 Mask:255.255.255.255 inet6 addr: 2607:f740:44:22::1/64 Scope:Global UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:739567 errors:0 dropped:0 overruns:0 frame:0 TX packets:1218240 errors:0 dropped:1542 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:46512557 (44.3 MiB) TX bytes:1559930874 (1.4 GiB) So OpenVPN is sucessfully creating a tun0 interface and assigning clients IPv6 addresses using 2607:f840:44:22::/64. The first client to connect is getting 2607:f840:44:22::1000 and the second 2607:f840:44:22::1001, and so on... plus 1 each time. After connecting as the first client, I can ping from my windows client machine 2607:f740:44:22::1 and 2607:f740:44:22::1000. However, I have no access to IPv6 websites. I believe the problem is that the tun0 IPv6 addressees are not being forwarded to the eth0 interface. This is the firewall running on the server: #!/bin/sh # # iptables configuration script # # Flush all current rules from iptables # iptables -F iptables -t nat -F # # Allow SSH connections on tcp port 22 # iptables -A INPUT -i eth0 -p tcp --dport 22 -j ACCEPT iptables -A OUTPUT -o eth0 -p tcp --sport 22 -j ACCEPT # # Set access for localhost # iptables -A INPUT -i lo -j ACCEPT # # Accept connections on 1195 for vpn access from client # iptables -A INPUT -i eth0 -p udp --dport 1195 -m state --state NEW,ESTABLISHED -j ACCEPT iptables -A OUTPUT -o eth0 -p udp --sport 1195 -m state --state ESTABLISHED -j ACCEPT # # Apply forwarding for OpenVPN Tunneling # iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j SNAT --to 209.111.39.160 iptables -A FORWARD -j REJECT # # Enable forwarding # echo 1 > /proc/sys/net/ipv4/ip_forward # # Set default policies for INPUT, FORWARD and OUTPUT chains # iptables -P INPUT ACCEPT iptables -P FORWARD ACCEPT iptables -P OUTPUT ACCEPT # # IPv6 # IP6TABLES=/sbin/ip6tables $IP6TABLES -F INPUT $IP6TABLES -F FORWARD $IP6TABLES -F OUTPUT echo -n "1" >/proc/sys/net/ipv6/conf/all/forwarding echo -n "1" >/proc/sys/net/ipv6/conf/all/proxy_ndp echo -n "0" >/proc/sys/net/ipv6/conf/all/autoconf echo -n "0" >/proc/sys/net/ipv6/conf/all/accept_ra $IP6TABLES -A INPUT -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT $IP6TABLES -A INPUT -i eth0 -p tcp --dport 22 -j ACCEPT $IP6TABLES -A INPUT -i eth0 -p icmpv6 -j ACCEPT $IP6TABLES -P INPUT ACCEPT $IP6TABLES -P FORWARD ACCEPT $IP6TABLES -P OUTPUT ACCEPT Server.conf: server-ipv6 2607:f840:44:22::/64 server 10.8.0.0 255.255.255.0 port 1195 proto udp dev tun ca ca.crt cert server.crt key server.key dh dh2048.pem ifconfig-pool-persist ipp.txt push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" keepalive 10 60 tls-auth ta.key 0 cipher AES-256-CBC comp-lzo user nobody group nobody persist-key persist-tun status openvpn-status.log log-append openvpn.log verb 5 Client.conf: client dev tun nobind keepalive 10 60 hand-window 15 remote 209.111.39.160 1195 udp persist-key persist-tun ca ca.crt key client1.key cert client1.crt remote-cert-tls server tls-auth ta.key 1 comp-lzo verb 3 cipher AES-256-CBC I'm not sure where I am going wrong, it could be the firewall, or something missing from server or client.conf. This version of OpenVPN was only released yesterday, and there's little info on the internet about how to setup an IPv6 over IPv4 vpn tunnel. I've read the manual for this new version of OpenVPN (parts pertaining to IPv6) and it provides very little info too. Thanks for any help.

    Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >