Search Results

Search found 24232 results on 970 pages for 'net4 client profile'.

Page 89/970 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

• CentOS Client - Unable to Establish iSCSI connection with multiple interfaces on the initiator

  - by slashdot

  So after upgrading to CentOS 6.2, I am seemingly no longer able to login into my iSCSI targets. I have multiple interfaces on different subnets on the system, and I first thought that it had to do with the fact that I may not be binding correct interfaces, which seems to be the case when looking at netstat, as this is clearly wrong: [root]? netstat -na|grep .90 tcp 0 1 10.10.100.60:42354 10.10.8.90:3260 SYN_SENT tcp 0 1 10.10.100.60:40777 10.10.9.90:3260 SYN_SENT I then went ahead and disabled all but one interface, and so as a result netstat appears to be correct, but the issue with login remains. I am positive that the target never sees a packet, because I see nothing by SYN_SENT. I know the problem is on my client, because the target is servicing multiple systems, none of which are CentOS 6.2. At this point I am pretty confident that some things changed between CentOS 6.0/6.1 and 6.2. So, if anyone have any thoughts, or ran into this, I would very much like to hear your thoughts. [root]? iscsiadm --mode node --targetname iqn.2011-12.dom.homer:01:lab-centos-servers-00001 --portal 10.10.8.90:3260,2 --interface=sw-iscsi-0 --login Logging in to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260] (multiple) iscsiadm: Could not login to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not log into all portals [root]? netstat -rn Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 10.10.8.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2.7 10.10.9.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3.7 10.10.100.0 0.0.0.0 255.255.252.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth2.7 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth3.7 0.0.0.0 10.10.100.1 0.0.0.0 UG 0 0 0 eth0 Output of ip addr show for the two interfaces involved: [root]? for i in 2.7 3.7; do ip addr show eth$i; done 6: eth2.7@eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:0c:29:94:5b:8d brd ff:ff:ff:ff:ff:ff inet 10.10.8.60/24 brd 10.10.8.255 scope global eth2.7 inet6 fe80::20c:29ff:fe94:5b8d/64 scope link valid_lft forever preferred_lft forever 7: eth3.7@eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:0c:29:94:5b:97 brd ff:ff:ff:ff:ff:ff inet 10.10.9.60/24 brd 10.10.9.255 scope global eth3.7 inet6 fe80::20c:29ff:fe94:5b97/64 scope link valid_lft forever preferred_lft forever Update 01/06/2012: This issue is getting even more interesting by the day it seems. I went a few weeks back and grabbed a snapshot of this system from before upgrading to 6.2. I spun up a new system from the snapshot, and reconfigured interface info and host keys, as well as iSCSI initiator and iscsi interface info to match new MACs. Changed nothing else. Then, I attempted to connect to my targets, and no issues at all. I cannot say that this was unexpected. I then went ahead and compared sysctl settings from both systems and there were differences after the upgrade, but nothing seemingly relevant to iSCSI or IP that could contribute to this. I also noticed that by default now two sessions per connection were enabled after the upgrade, but I changed it back to 1 session in /etc/iscsi/iscsid.conf. On the problematic system we can see that source interface is seemingly wrong, but even when I disable the 10.10.100 interface, problems persist. So, while this may be relevant, I could not validate it for certain. Needless to say, further research is necessary. Something is clearly different between releases. Working system is on 6.1, and non-working is 6.2. ::Working System:: tcp 0 0 10.10.8.210:39566 10.10.8.90:3260 ESTABLISHED tcp 0 0 10.10.9.210:46518 10.10.9.90:3260 ESTABLISHED [root]? ip route show 10.10.8.0/24 dev eth2.6 proto kernel scope link src 10.10.8.210 10.10.9.0/24 dev eth3.7 proto kernel scope link src 10.10.9.210 10.10.100.0/22 dev eth0 proto kernel scope link src 10.10.100.210 169.254.0.0/16 dev eth0 scope link metric 1002 169.254.0.0/16 dev eth2.6 scope link metric 1006 169.254.0.0/16 dev eth3.7 scope link metric 1007 default via 10.10.100.1 dev eth0 ::Non-working System:: tcp 0 1 10.10.100.60:44737 10.10.9.90:3260 SYN_SENT tcp 0 1 10.10.100.60:55479 10.10.8.90:3260 SYN_SENT [root]? ip route show 10.10.8.0/24 dev eth2.6 proto kernel scope link src 10.10.8.60 10.10.9.0/24 dev eth3.7 proto kernel scope link src 10.10.9.60 10.10.100.0/22 dev eth0 proto kernel scope link src 10.10.100.60 169.254.0.0/16 dev eth0 scope link metric 1002 169.254.0.0/16 dev eth2.6 scope link metric 1006 169.254.0.0/16 dev eth3.7 scope link metric 1007 default via 10.10.100.1 dev eth0 And the result is still same: [root]? iscsiadm: Could not login to [iface: sw-iscsi-0, target: iqn.2011-12.dom.homer:01:lab-centos-servers-00001, portal: 10.10.8.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not login to [iface: sw-iscsi-1, target: iqn.2011-12.dom.homer:02:lab-centos-servers-00001, portal: 10.10.9.90,3260]. iscsiadm: initiator reported error (8 - connection timed out) iscsiadm: Could not log into all portals Update 01/08/2012: I believe I have been able to figure out the answer to my issue. It is quite obscure and I doubt this will happen to anyone else any time soon. It turns out that setting iface.iscsi_ifacename and iface.hwaddress in the interfaces configuration file is not legal. When one manually adds an iscsi target, such as below, all settings from the interface config file are copied into the node config file, that gets created by the below command. Result is parameters iface.iscsi_ifacename and iface.hwaddress together in the same config file. These parameters are seemingly mutually exclusive, which does not exactly make sense, or there is perhaps an oversight in the codepath. Perhaps I will investigate further. # iscsiadm -m node --op new -T iqn.2011-12.dom.homer:01:lab-centos-servers-00001 -p 10.10.8.90,3260,2 -I sw-iscsi-0 # iscsiadm -m node --op new -T iqn.2011-12.dom.homer:02:lab-centos-servers-00001 -p 10.10.9.90,3260,2 -I sw-iscsi-1 Notice, below I commented out iface.hwaddress and iface.ipaddress, after which I re-added targets, with same command as above. All works just fine. [root]? cat * # BEGIN RECORD 2.0-872.33.el6 iface.iscsi_ifacename = sw-iscsi-0 iface.net_ifacename = eth2.6 #iface.hwaddress = XX:XX:XX:XX:XX:XX #iface.ipaddress = 10.10.8.60 iface.transport_name = tcp iface.vlan_id = 6 iface.vlan_priority = 0 iface.iface_num = 0 iface.mtu = 0 iface.port = 0 # END RECORD # BEGIN RECORD 2.0-872.33.el6 iface.iscsi_ifacename = sw-iscsi-1 iface.net_ifacename = eth3.7 #iface.hwaddress = XX:XX:XX:XX:XX:XX #iface.ipaddress = 10.10.9.60 iface.transport_name = tcp iface.vlan_id = 7 iface.vlan_priority = 0 iface.iface_num = 0 iface.mtu = 0 iface.port = 0 # END RECORD Again, chances of this happening to someone else are slim to none, so likely waste of time typing this up. But, if someone does encounter this issue, I hope this post will help.

  Read the article

• Custom prompt doesn't work on Mac's terminal

  - by mareks

  I like to use a custom prompt (current path in blue) on my unix machine: export PS1='\[\e[0;34m\]\w \$\[\e[m\] ' But when I try to use it on Mac's terminal it doesn't work: it fails to detect the end of the prompt and overwrites the prompt when I type commands. This also happens when I'm inputting a long command where it wraps over the same line instead of starting a new line. I don't understand why this is the case since I use bash on both machines. Any suggestions on how to remedy this?

  Read the article

• How to set User Tile image Windows Server 2012?

  - by moontear

  I found this nice article of how to add a user tile image via code: http://joco.name/2010/12/06/i-discovered-the-new-windows-user-tile-api/ This is also explained in depth here: http://msitpros.com/?p=1036 I have problems with doing this in Windows Server 2012. Whenever I run the code: using System; using System.Runtime.InteropServices; namespace FejesJoco { class Program { [DllImport("shell32.dll", EntryPoint = "#262", CharSet = CharSet.Unicode, PreserveSig = false)] public static extern void SetUserTile(string username, int whatever, string picpath); [STAThread] static void Main(string[] args) { SetUserTile(args[0], 0, args[1]); } } } I get an exception: Error HRESULT E_FAIL has been returned from a call to a COM component. Can anyone get this to work and add a user tile image via code?

  Read the article

• Roaming Profiles, Folder redirection or... both

  - by Adrian Perez

  Hello, i'm developing a remote desktop services in w2008r2. Now, it's going to be a server, but in the future it's possible that another server could be added to the farm. Now, i'm creating roaming profiles and folder redirection to save space. Now, i have some doubts... if i'm redirecting all the folders i can do through gpo (start menu, desktop, appdata, My Documents, Videos, Music...), does it make sense to use roaming profiles? I mean, i'm redirecting almost everything. So, if i don't use roaming profiles, what kind of data is not shared/roamed? Perhaps is not necessary and if i set roaming profiles, i will add more unnecessary complexity to the infraestructure. What do you think about? Some advice or recomendation? Thanks!

  Read the article

• OS X Lion - Installing Oracle 10g Standard Edition

  - by Cellze

  Im trying to install oracle 10g on to OS X Lion, I have previous achieved this on snow leopard with the following http://blog.rayapps.com/2009/09/14/how-to-install-oracle-database-10g-on-mac-os-x-snow-leopard/ The issue im having is that the ulimit settings in the oracle/.bash_profile cannot be modified. I have the following in the bash_profile: export DISPLAY=:0.0 export ORACLE_BASE=$HOME umask 022 # must match `sysctl kern.maxprocperuid` ulimit -Hu 512 ulimit -Su 512 # must match `sysctl kern.maxfilesperproc` ulimit -Hn 10240 ulimit -Sn 10240 Upon applying the bash_profile settings . ~/.bash_profile i get the following error: -bash: ulimit: max user processes: cannot be modify limit: Invalid argument This then results in $ sqlplus / as sysdba not functioning correctly with a Segmentation fault: 11 The output of $ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited file size (blocks, -f) unlimited max locked memory (kbytes, -l) unlimited max memory size (kbytes, -m) unlimited open files (-n) 10240 pipe size (512 bytes, -p) 1 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 512 virtual memory (kbytes, -v) unlimited If any one knows how I can apply these ulimit settings to the oracle user I have created to allow me to install sqlplus and therefore create a db, that would be great.

  Read the article

• Can't use command line – "command not found" after editing PATH

  - by MEM

  I'm running OS X Mavericks and was trying to install MAMP PRO 2.2. I was trying to configure the PATH variable to have the PHP binaries of MAMP PRO. I added the following line on my ~/.bash_profile file: export PATH=/Applications/MAMP PRO/bin/php/php5.5.3/bin:$PATH As you may notice, since I have MAMP PRO and not just MAMP, I've added a space. As a consequence, I know have the following error each time I run the terminal: -bash: export: `PRO/bin/php/php5.5.3/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin': not a valid identifier Worst: I can't get any command to run, like: ls, clear etc. I always get: "command not found" I don't even know the absolute path for ls. How can I make the commands work again, so that I can properly fix the path I was trying to setup on the .bash_profile file?

  Read the article

• Roaming Profiles: Best Practices

  - by Noah Clark

  I want to setup roaming profiles for about 50 users. What is the best way to go about doing this? What are the best practices. I've read about desktops/my Documents being TOO big. How big is too big? We have a few users who keep a lot of media on their machine to listen to throughout the day. I would imagine they have a few gigs of MP3's in their My Documents folder. How do you deal with this? Thanks!

  Read the article

• Configure bash_profile for one single terminal emulator

  - by Hugo

  I'm using a new terminal emulator. Terminology is the E17 default terminal, and it have a great command, $ tyls with is a "graphical" $ ls I want to create an alias just for this terminal, because the command "tyls" don't make sense to konsole, rxvt or other terminals. I'm thinking in some kind of "if" in ~/.bash_profile to test if I'm on terminology and then run the following command: alias ls="tyls" But how can I test if I'm in terminology but not xterm? Can someone help me? Thanks!

  Read the article

• All terminal commands (like ls, cd, edit, open) are returning errors on my Mac

  - by park

  From what I can tell from reading other questions/answers is that my .bash_profile file may be corrupt. If I type echo $PATH in terminal the result is: /usr/local/git/bin From what I've read, that's not what the result is supposed to be. But I also can't get any of the commands (like edit or subl, for Sublime Text 2) to open the .bash_profile file to edit it. I was able to open the file in TextEdit using "cmd-shift-.", and here's what's in the file: [[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm" PATH=$PATH:~/bin export PATH export PATH=/usr/local/git/bin But the file is LOCKED, so I can't edit it there either. I'm very new to programming and in the middle of trying to install everything on my Mac to go through a Ruby on Rails tutorial. I can't even check my version of ruby, since even ruby -v returns -bash: ruby: command not found Any help would be greatly appreciated. Thanks.

  Read the article

• Enabling Shell colours through Putty SSH

  - by Jon

  I have set a number of configurations in my .bashrc file to set the appearance of shell on my Redhat machine. However, when I login as root using Putty, the colours are not shown. I can enable them again by typing 'su', which simply puts me back to root like I was when I logged into putty, but that isn't exaclty ideal. Is there some configuration file or something I can use to enable shell colours when I login with Putty? Thanks

  Read the article

• Is there an online identicon creator?

  - by wonsungi

  I thought the pictures associated with our profiles were automatically generated until they were manually changed. A lot of people have these cool identicons based on their IP address. How can I get my own identicon? I am looking for an online generator. Gravator does not seem to have any options to generate identicons. Edit: I will probably accept your answer if you just tell me how you made your identicon (and it did not involve downloading/installing stuff)

  Read the article

• How can I decrease the time spent reformatting / restoring user's workstations?

  - by CT

  I just working for a medium sized company (approx. 150 users). When user's workstations need to be reformatted for any variety of reasons, we reformat, reinstall windows from an oem disk, install drivers, install shop desired software, and restore user's documents from latest backup. While the process isn't very difficult it is very time consuming. What are some options simplify / speed up this process? Mostly a complete Windows shop with most servers running Win2k3 Enterprise and workstations running a variety of XP, Vista, and 7. Workstations are purchased through a variety of OEMs mostly Dell.

  Read the article

• Moving C:\Users to another partition on Windows Server 2008 Standard

  - by binary255

  Hi, On a Windows Server 2008 Standard-server I have two partitons, named C: and P:. I would like to move the user profiles directory C:\Users to P:\Users Is it possible? Is it supported by Microsoft? Could this result in any problems when upgrading etc? Has anyone here done anything similar?

  Read the article

• User sees all Sharepoint document as being from 1938

  - by Ulys

  Hello, I currently have a problem I was unable to solve concerning Sharepoint. One of our user is seeing every file on Sharepoint as being from around 1938. The Created and Last Modified field are affected. When the user saves a file on his computer, the date is correct. If I log on his computer, the date are fine. If he log on my computer, the date are wrong once again, so it is linked to its Sharepoint account. The day and month are wrong to, but files uploaded 3 days apart are still 3 days apart for him. I don't see how anything could affect a date like that... Any help would be appreciated. Thanks, PS: Destroying his account and give him a new one is not a solution for now. He has been in this company for a long time and he has a lot of rights inherited from Sharepoint 2003 that are complicated to create.

  Read the article

• Roaming user profiles in Linux

  - by Nulldevice

  My company is evaluating a plan to migrate from Windows to Linux. Can you suggest something in Linux analogous to roaming user profiles and domain users in an Active Directory environment?

  Read the article

• After deleting a local machines offline file cache, the same user's "my documents" no longer redirects to the network location.

  - by stead1984

  One of my apprentices was tasked with clearing out unused local profiles and clearing the offline file cache. After he cleared the offline file cache and rebooted the machine, he would log in as himself and no longer have his "my documents" redirected to the set network location. More over this seemed to then affect ANY other networked machine he logged into, except his own laptop. All our standard workstations run Windows XP Service Pack 3, the apprentice's laptop runs Windows 7 Professional. I can understand how clearing the offline file cache after deleting old local profiles could cause this issue but draw a complete blank as to why it would affect all networked machines. It's a strange one so this question may be a little hard to understand so any questions or further understanding required please ask.

  Read the article

• Explain why .bash_logout won't run commands?

  - by Droogans

  So I've been wondering how to run these two lines of code everytime I close an open instance of Terminal: history -c cat /dev/null > ~/.bash_history I export HISTFILE=5 on startup, but still want to flush that out when I'm done. I've tried looking around a bit in a couple of places, and haven't had much luck. I run Linux Mint, and would also note here that I ran into a similar issue with .bash_profile; eventually, I discovered I needed to place all start up code in .bashrc, so maybe that has something to do with it. Here's my .bash_logout file: #!/bin/bash # ~/.bash_logout: executed by bash(1) when login shell exits. # when leaving the console clear the screen to increase privacy if [ "$SHLVL" = 1 ]; then history -c cat /dev/null > ~/.bash_history [ -x /usr/bin/clear_console ] && /usr/bin/clear_console -q fi #this does nothing on exit... echo 'logout'; sleep 2s I've tried re-arranging this script many ways, I'm not sure if I don't understand how bash works, and if any of this is running in the first place. Does the fact that I run Xserver make bash consider Terminal something that isn't a log-out on exit?

  Read the article

• How to use process monitor to view or log a windows login?

  - by leeand00

  We're having some issues with Windows 7 Roaming profiles and I was reading here that the login process can be monitored using process monitor. "There are a couple of ways to configure Process Monitor to record logon operations: one is to use Sysinternals PsExec to launch it in the session 0 so that it survives the logoff and subsequent logon and another is to use the boot logging feature to capture activity from early in the boot, including the logon." How does one do either of these options using process monitor to find out what is happening during a user login?

  Read the article

• How to connect Active Directory (AD - W2K3) to Lightweight Directory Access Protocol (LDAP - Fedora + Dogtag)?

  - by JackKnows

  Hey my goal is to connect a Active Directory (AD) to Lightweight Directory Access Protocol (LDAP) using Fedora + Dogtag after that using OS´s like Windows XP or 7 and Linuxs like Ubuntu they can access that connections and take part of some functionalities like "Roaming Profiles", "Printers", "Auth" and other stuff. If anyone can help i appreciate because i am new to this and this very important.

  Read the article

• Can I have a Linux based Server which handles roaming profiles for Windows and Mac OS X ?

  - by _ande_turner_

  Is it possible to have roaming profiles for Windows, and portable home directories for Mac OS X be served up from a Linux Server ? ie: 1 home directory for a mixed environment.

  Read the article

• How do I load UserProfile in IIS6.0?

  - by chugh97

  I know that IIS 7.0 you have an option where you can say load user profile for NETWORKSERVICE or some other custom domain account, but with IIS 6.0 no such option exists. How can thisb e achieved?

  Read the article

• How to create a UserProfile form in Django with first_name, last_name modifications ?

  - by Natim

  If think my question is pretty obvious and almost every developer working with UserProfile should be able to answer it. However, I could not find any help on the django documentation or in the Django Book. When you want to do a UserProfile form in with Django Forms, you'd like to modify the profile fields as well as some User field. But there is no forms.UserProfileForm (yet?) ! How do you do that ?

  Read the article

• How can I crop/scale user images so I can display fixed sized thumbnails without skewing and stretch

  - by KingNestor

  I'm working on allowing users to upload profile pictures for my site. The classic example of what I'm trying to avoid is plentyoffish.com where each users image is skewed and looks very ugly: So, how can I progmatically crop/create standard sized versions of an image without the skewing demonstrated above?

  Read the article

• autu delete file in shellscript

  - by ngoclong

  I need a script to automatically delete the user profile left on ubuntu 9.04, anyone please send me this mail: [email protected] thank you, please indicate how I work not fluent in shellscript.

  Read the article

• Using WCF DLL with VB6 ?

  - by Steven2ic

  I have a VB6 application that needs to communicate with a VS2008 VB.NET WCF server. I have built a VB.NET WCF DLL to be used on the client side, and it --almost-- works with the VB6 application. When I try to run the VB6 app in debug mode, I get "Could not find endpoint element with name 'NetTCPBinding_IComPortManager' and contract 'IComPortManager' in the ServiceModel client configuration section." Using a dummy VB.Net client app, with the same WCF DLL works fine. I presume that the VB6 app/WCF DLL is not finding app.config. Where should app.config be ? Is there a way to tell WCF where to find app.config ?

  Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >