Search Results

Search found 10810 results on 433 pages for 'port forwarding'.

Page 89/433 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

• Pantech Link II, Ubuntu and Virtual XP

  - by user85041

  Okay this is my problem. I have a Pantech Link II, dmesg states: [ 896.072037] usb 2-3: new high-speed USB device number 3 using ehci_hcd [ 896.258562] cdc_acm 2-3:1.0: ttyACM0: USB ACM device [ 896.260039] usbcore: registered new interface driver cdc_acm [ 896.260042] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters Have it installed through wine (pc suite and driver) and it doesn't see it. Virtual XP through VMWare Player sees my device, knows it needs a driver. The removable devices says Curitel Pantech USB Device (Maybe Driver). I have PC Suite installed in XP, I install the driver through the executable.. it says problem with installing hardware, and then it disappears. Ubuntu sees it after restart, but if I start XP with that driver installed, it disappears from both and I get these errors in dmesg: [ 1047.760555] /dev/vmmon[2882]: PTSC: initialized at 3093322000 Hz using TSC, TSCs are synchronized. [ 1048.174033] /dev/vmmon[2882]: Monitor IPI vector: 0 [ 1055.293060] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1055.293074] /dev/vmnet: port on hub 8 successfully opened [ 1055.293088] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1055.293094] /dev/vmnet: port on hub 8 successfully opened [ 1072.446305] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1072.446316] /dev/vmnet: port on hub 8 successfully opened [ 1072.446328] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1072.446334] /dev/vmnet: port on hub 8 successfully opened [ 1072.856024] usb 1-1: reset high-speed USB device number 2 using ehci_hcd [ 1079.292024] usb 1-1: reset high-speed USB device number 2 using ehci_hcd [ 1079.732024] usb 1-1: reset high-speed USB device number 2 using ehci_hcd [ 1127.743034] NET: Registered protocol family 39 [ 1127.749320] [3163]: VMCI: IOCTL_VMCI_QUEUEPAIR_ALLOC (cid=1522210225,result=4). [ 1144.104031] usb 2-3: reset high-speed USB device number 3 using ehci_hcd [ 1144.412031] usb 2-3: reset high-speed USB device number 3 using ehci_hcd [ 1155.889976] ehci_hcd 0000:00:13.2: force halt; handshake ffffc90000642024 00004000 00000000 -> -110 [ 1155.889980] ehci_hcd 0000:00:13.2: HC died; cleaning up [ 1155.890008] usb 2-3: USB disconnect, device number 3 [ 1155.890013] usb 2-3: usbfs: usb_submit_urb returned -110 [ 1658.310777] [3163]: VMCI: IOCTL_VMCI_QUEUEPAIR_DETACH (cid=1522210225,result=3). [ 1658.392018] NET: Unregistered protocol family 39 [ 1666.546438] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546450] /dev/vmnet: port on hub 8 successfully opened [ 1666.546462] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546467] /dev/vmnet: port on hub 8 successfully opened [ 1671.431383] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0101) [ 1671.432533] input: USB2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input13 lessa@X:~$ dmesg|tail [ 1155.890008] usb 2-3: USB disconnect, device number 3 [ 1155.890013] usb 2-3: usbfs: usb_submit_urb returned -110 [ 1658.310777] [3163]: VMCI: IOCTL_VMCI_QUEUEPAIR_DETACH (cid=1522210225,result=3). [ 1658.392018] NET: Unregistered protocol family 39 [ 1666.546438] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546450] /dev/vmnet: port on hub 8 successfully opened [ 1666.546462] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0) [ 1666.546467] /dev/vmnet: port on hub 8 successfully opened [ 1671.431383] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0101) [ 1671.432533] input: USB2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input13 I have tried uninstalling, and installing manually from the device manager update driver while it's still has the warning sign.. it doesn't see the drivers as valid. No idea how to fix this.. would prefer to not have to go to another computer. I'm not trying to do anything but get the pictures off of it. I have to restart ubuntu, plug in device, for ubuntu to see it correctly again. I am like a month and a half old linux newbie so I have no idea the commands I could use for this, and I don't have a memory card in the phone to mount.

  Read the article

• How to setup a wifi ap hotspot with ipv6 support?

  - by keyman

  How to setup a wifi ap (access point mode) hotspot, with IPv6 support? I've set up a hotspot according to the guide to wifi ap hotspot setup and it works fine. But via the hotspot I failed to visit IPv6 websites. How can I setup a hotspot able to share Ipv6 Internet access? Thanks! Further: Actually I've tried to setup IPv6 forwarding and masquerading. First enabling IPv6 forwarding: echo 1 | sudo tee net/ipv6/conf/default/forwarding Then I tried to execute: sudo ip6tables -t nat -A POSTROUTING -s 2001:db8:0:1::/64 -o eth0 -j MASQUERADE But it gave me an error: ip6tables v1.4.12: Couldn't load target `MASQUERADE':No such file or directory I searched through the Internet but I get confused. So I'm here for help. Thanks!

  Read the article

• VLAN support on Juniper EX - 2200 switches

  - by liv2hak

  I have 6 Juniper switches (EX - 2200) connected to each other as shown in the network topology below. I have two PC's that I am using PC1 - (used for configuring the 6 switches via minicom) PC2 - to monitor the traffic between the switches via the Ports that are marked with arrows in the diagram. STEP 1: I create a new vlan On Switch 3 (SW3) that includes Port 12 and Port 22. I also assign l3-interface to the vlan (vlan_2) with ip address - 192.168.1.7. Now I plug-in Port 0 of Switch 3 on PC2. Now I try pinging 192.168.1.7 from PC2 (192.168.1.10) I want to know what will happen? My postulation is that I will not be able to ping SW3 from PC2.This is because SW3 (Port 12 and Port 22) is a part of a vlan_2 and vlan_2 logically breaks up broadcast domains and so 192.168.1.7 will not be reachable from 192.168.1.10. Now I have an l3-interface on SW1 with IP 192.168.1.1 using default vlan( vlan-id 0). Similarly I have enabled IP on SW2 - 192.168.1.2 SW3 - 192.168.1.3 SW4 - 192.168.1.4 SW5 - 192.168.1.5 SW6 - 192.168.1.6 all using default vlan. Now I plug in Port 12 of SW3 (blue cable) into the PC2. I try to ping 192.168.1.1 from PC2. What will happen at this stage.? My postulation is that I will be able to ping switch 1.Is this correct? Also another question is that can a single port on a Switch be added multiple VLANS? I am a beginner at network configuration? Any help would be highly appreciated. (Please ignore the CISCO symbol on the switches in the diagram.All swithes are Junper EX 22-00.)

  Read the article

• Cygwin, ssh, and git on Windows Server 2008

  - by Paul

  Hi everyone. I'm trying to setup a git repository on an existing Windows 2008 (R2) server. I have successfully installed Cygwin & added git and ssh to the packages, and everything works perfectly (thanks to Mark for his article on it). I can ssh to localhost on the server, and I can do git operations locally on the server. When I try to do either from the client, however, I get the "port 22, Bad file number" error. Detailed SSH output is limited to this: OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug1: Connecting to {myserver} [{myserver}] port 22. debug1: connect to address {myserver} port 22: Attempt to connect timed out without establishing a connection ssh: connect to host {myserver} port 22: Bad file number Google tells me that this means I'm being blocked, usually, by a firewall. So, double-checked the firewall settings on the server, rule is there allowing port 22 traffic. I even tried turning off the firewall briefly, no change in behavior. I can ssh just fine from that client to other servers. The hosting company swears that there's no other firewalls blocking that server on port 22 (or any other port, they claim, but I find that hard to believe). I have another trouble ticket into them, just in case the first support person was full of it, but meanwhile I wanted to see if anyone could think of anything else it can be. Thanks, Paul

  Read the article

• How to determine which ports are open/closed on a FIREWALL?

  - by Rahl

  It seems no one has asked this question before (most regard host-based firewalls). Anyone familiar with port scanning tools (e.g. nmap) knows all about SYN scanning, FIN scanning, and the like to determine open ports on a host machine. Question is though, how do you determine the open ports on a firewall itself (disregard whether the host you're trying to connect to behind the firewall has those particular ports open or closed). This is assuming the firewall is blocking your IP connection. Example: We all communicate with serverfault.com through port 80 (web traffic). A scan on a host would reveal port 80 is open. If serverfault.com is behind a firewall and still allows this traffic through, then we can assume the firewall has port 80 open also. Now let's assume the firewall is blocking you (e.g. your IP address is under the deny list or is missing in the allowed list). You know port 80 has to be open (it works for appropriate IP addresses), but when you (the disallowed IP) attempt any scanning, all port scan attempts on the firewall drop the packet (including port 80, which we know to be open). So, how might we accomplish a direct firewall scan to reveal open/closed ports on the firewall itself, while still using the disallowed IP?

  Read the article

• Are HDMI to VGA Adapters Really Device-Specific?

  - by allquixotic

  There are a lot of devices on the market right now (especially mobile devices) with a Micro-HDMI or Mini-HDMI port and no VGA or D-Sub output. Most manufacturers of said devices sell a cable that looks something like this: I have yet to find a cable like this that claims to work on a wide array of devices. In general, these cables claim to work with one specific device only. The way these cables work, I think, is that analog VGA signals are sent from the HDMI port on the device. This should work for devices that have special hardware on the motherboard/GPU capable of driving this. Is it the case that these cables have to be custom designed for each device? Or, is it rather that any device which possesses this special "signaling of analog VGA over the HDMI port" can be made to work with a cable that is physically compatible (i.e. the HDMI end plugs into the device and the VGA end accepts a VGA monitor cable)? Note that I am not looking for a product recommendation, just a conceptual clarification on what exactly these devices are doing. Also, a few remarks: The cables like the one depicted here are not digital to analog converters. I know about these: they are expensive, and they are the ONLY solution if your device only outputs a digital signal and is incapable of driving analog VGA over the HDMI port. The cables like the one depicted here are not straight crossover cables from VGA to HDMI, either. The crossover cables are designed to send a digital HDMI signal over the VGA port's wires; that is, the wire protocol is HDMI (digital) but the physical pinout is the same as VGA, even though nothing analog is happening. Once again, this is not the behavior that, I believe, the devices which I'm talking about in this question are doing. The cabling and devices that this question is about transmit the analog VGA data over the HDMI port (the HDMI port is in the device outputting the data, and the VGA side is the monitor/projector).

  Read the article

• DD-WRT (WRT54G) and (THOMSON TG782) how to put them togather?

  - by FeRtoll

  Ok so let me explain, i bought WRT54G and successfully installed DD-WRT v24-sp1 (07/26/08) mini-special - build 9994. That's all ok no problems with it all normal functioning. And just to add (i don't need wireless, wireless is turned off always) What i want: ISP's router (TG782) from it's INTERNET port(out) cable "which was before in my pc" is connected to WRT54G's INTERNET port and then from WRT54G LAN port 1 to my pc. The problem: How do i connect and setup all? I have tried many times on many different ways but cant get it to work IF THE CABLE FROM TG782 IS CONNECTED TO WRT54G ON INTERNET PORT. If i connect the TG782 to Lan port 1 on WRT54G and my pc to lan port 2 then all works fine after i setup gateway and all. But i want to connect TG782 to Internet port of WRT54G because i need "Access Restrictions" and this only goes through WAN right? please correct me if i am wrong. What i have tried: This is how i have tried to setup all. The TG782 router ip is 192.168.1.1 And WRT54G ip is 192.168.1.30 so in WRT54G control panel i have setup like this: ----WAN Connection Type---- Connection Type: Automatic Configuration - DHCP STP: Disabled ----Router IP---- Local IP Address: 192.168.1.30 Subnet Mask: 255.255.255.0 Gateway: 192.168.1.1 (the TG782) ----Network Address Server Settings (DHCP)---- DHCP Type: DHCP Server Start IP Address: 192.168.1.100 Maximum DHCP Users: 6 And this wont work i probably miss something more, if anyone can help i would be thankfull. Also i have to note that i have tried to set my network adapter on pc to use the gateway of WRT54G and ip 192.168.1.102 In short: i cant get it to work normal only as a switch! Thanks for any help! -------EDIT:------- Here is an image which maybe can help: http://img27.imageshack.us/img27/4227/allin1w.jpg

  Read the article

• Abysmal transfer speeds on gigabit network

  - by Vegard Larsen

  I am having trouble getting my Gigabit network to work properly between my desktop computer and my Windows Home Server. When copying files to my server (connected through my switch), I am seeing file transfer speeds of below 10MB/s, sometimes even below 1MB/s. The machine configurations are: Desktop Intel Core 2 Quad Q6600 Windows 7 Ultimate x64 2x WD Green 1TB drives in striped RAID 4GB RAM AB9 QuadGT motherboard Realtek RTL8810SC network adapter Windows Home Server AMD Athlon 64 X2 4GB RAM 6x WD Green 1,5TB drives in storage pool Gigabyte GA-MA78GM-S2H motherboard Realtek 8111C network adapter Switch dLink Green DGS-1008D 8-port Both machines report being connected at 1Gbps. The switch lights up with green lights for those two ports, indicating 1Gbps. When connecting the machines through the switch, I am seeing insanely low speeds from WHS to the desktop measured with iperf: 10Kbits/sec (WHS is running iperf -c, desktop is iperf -s). Using iperf the other way (WHS is iperf -s, desktop iperf -c) speeds are also bad (~20Mbits/sec). Connecting the machines directly with a patch cable, I see much higher speeds when connecting from desktop to WHS (~300 Mbits/sec), but still around 10Kbits/sec when connecting from WHS to the desktop. File transfer speeds are also much quicker (both directions). Log from desktop for iperf connection from WHS (through switch): C:\temp>iperf -s ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 8.00 KByte (default) ------------------------------------------------------------ [248] local 192.168.1.32 port 5001 connected with 192.168.1.20 port 3227 [ ID] Interval Transfer Bandwidth [248] 0.0-18.5 sec 24.0 KBytes 10.6 Kbits/sec Log from desktop for iperf connection to WHS (through switch): C:\temp>iperf -c 192.168.1.20 ------------------------------------------------------------ Client connecting to 192.168.1.20, TCP port 5001 TCP window size: 8.00 KByte (default) ------------------------------------------------------------ [148] local 192.168.1.32 port 57012 connected with 192.168.1.20 port 5001 [ ID] Interval Transfer Bandwidth [148] 0.0-10.3 sec 28.5 MBytes 23.3 Mbits/sec What is going on here? Unfortunately I don't have any other gigabit-capable devices to try with.

  Read the article

• Network Misconfiguration when adding first host to new vSphere cluster

  - by dunxd

  I am building a new vSphere cluster from scratch. I have installed ESXi on the first host, and built a vCenter server on a VM residing on that host (storage is on the local hard drive, although we have iSCSI targets which I can reach from the host). The cluster is configured for HA. When I try and add the host to the cluster, I get an error at the point where HA is configured - Cannot complete the . I have stripped the network configuration of the host down to the most basic - a single NIC attached to a single vSwitch - this is running the VMKernel Port on VLAN 8 - that is our Management VLAN. The vCenter server will have a network address on this VLAN, so I also set the initial Virtual Machine Port Group to this VLAN, and connected the vCenter server NIC to this port group. I understand I can't connect the vCenter server to the VMkernel port group, but shouldn't I be able to connect the vCenter server to a Port Group in the same VLAN? If not, do I need to create a VLAN specifically for VMKernel Port Group? I plan to set up another port group for vMotion with a dedicated and isolated VLAN (i.e. VLAN isn't routed) so this wouldn't allow vCenter to communicate. Does anyone have any suggestions, or other ideas for what might be causing the problem. I've read through the documentation, but it isn't giving me any pointers, and the error message isn't helping me beyond telling me something is wrong with my network config.

  Read the article

• Redirect local, not internal, requests using SuSEfirewall2 or an iptables rule

  - by James

  I have a server that is running a web application deployed on Tomcat and is sitting in a test network. We're running SuSE 11 sp1 and have some redirection rules for incoming requests. For example we don't bind port 80 in Tomcat's server.xml file, instead we listen on port 9600 and have a configuration line in SuSEfirewall2 to redirect port 80 to 9640. This is because Tomcat doesn't run as root and can't open up port 80. My web application needs to be able to make requests to port 80 since that is the port it will be using when deployed. What rule can I add so that local requests get redirected by iptables? I tried looking at this question: How do I redirect one port to another on a local computer using iptables? but suggestions there didn't seem to help me. I tried running tcpdump on eth0 and then connecting to my local IP address (not 127.0.0.1, but the actual address) but I didn't see any activity. I did see activity if I connected from an external machine. Then I ran tcmpdump on lo, again tried to connect and this time I saw activity. So this leads me to believe that any requests made to my own IP address locally aren't getting handled by iptables. Just for reference he's what my NAT table looks like now: Chain PREROUTING (policy ACCEPT) target prot opt source destination REDIRECT tcp -- anywhere anywhere tcp dpt:http redir ports 9640 REDIRECT tcp -- anywhere anywhere tcp dpt:xfer redir ports 9640 REDIRECT tcp -- anywhere anywhere tcp dpt:https redir ports 8443 Chain POSTROUTING (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination

  Read the article

• tap interfaces always disabled in linux bridge

  - by Dani Camps

  I have a physical interface eth0, and I want to create two virtual interfaces and bridge them with eth0. For this purpose I do: #Create the virtual interfaces tunctl -t tap0 tunctl -t tap1 ifconfig tap0 up ifconfig tap1 up #Create the bridge brctl addbr br0 brctl stp br0 off brctl addif br0 eth0 brctl addif br0 tap0 brctl addif br0 tap1 #Turning up the bridge ifconfig br0 up However my problem if that the tap interfaces always appear disabled in the bridge, and no traffic flows to them. $brctl show br0 bridge name bridge id STP enabled interfaces br0 8000.080027cabeba no eth2 tap0 tap1 $brctl showstp br0 br0 bridge id 8000.080027cabeba designated root 8000.080027cabeba root port 0 path cost 0 max age 20.00 bridge max age 20.00 hello time 2.00 bridge hello time 2.00 forward delay 15.00 bridge forward delay 15.00 ageing time 300.01 hello timer 0.00 tcn timer 0.00 topology change timer 0.00 gc timer 298.42 flags eth2 (1) port id 8001 state forwarding designated root 8000.080027cabeba path cost 4 designated bridge 8000.080027cabeba message age timer 0.00 designated port 8001 forward delay timer 12.97 designated cost 0 hold timer 1.24 flags tap0 (2) port id 8002 state disabled designated root 8000.080027cabeba path cost 100 designated bridge 8000.080027cabeba message age timer 0.00 designated port 8002 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags tap1 (3) port id 8003 state disabled designated root 8000.080027cabeba path cost 100 designated bridge 8000.080027cabeba message age timer 0.00 designated port 8003 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags Is there any way to set the tap interfaces in forwarding state? I do not understand why they are not because STP is disabled. Cheers Daniel

  Read the article

• Cisco IOS BVI ACL: Only allow established UDP

  - by George Bailey

  Related: Cisco IOS ACL: Don't permit incoming connections just because they are from port 80 I know we can use the established keyword for TCP.. but what can we do for UDP (short of replacing a Bridge or BVI with a NAT)? Answer I found out what "UDP has no connection" means. DNS uses UDP for example.. named (DNS server) is lisenting on port 53 nslookup (DNS client) starts listening on some random port and sends a packet to port 53 of the server and notes the source port in that packet. nslookup will retry 3 times if necessary. Also the packets are so small that it does not have to worry about them coming in the wrong order. If nslookup receives a response on that port that comes from the servers IP and port then it stops listening. If the server tried to send two responses (for example a response and a response to the retry) then the server would not care if either of them made it because the client has the job to retry. In fact.. unless ICMP 3/3 packet gets through the server would not know about a failure. This is different from TCP where you get connection closed or timed out errors. DNS allows for an easy retry from the client as well as small packets.. so UDP is an excellent choice because it is more efficient. In UDP you would see nslookup sends request named sends answer In TCP you would see nslookup's machine sends SYN named's machine sends SYN-ACK nslookup's machine sends ACK and the request named's machine sends the response That is much more than is necessary for a tiny DNS packet

  Read the article

• WWNs,WWPNs and Fibre Channel addresses

  - by user238230

  Lots of contradictory on these subjects and I don't know why. My first question is about the 64 bit WWN. One reference claims the terms WWN and WWPN are synonymous. An online source seems to refute this. They say: A WWPN (world wide port name) is the unique identifier for a fibre channel port where a WWN (world wide name) the unique identifier for the node itself. A good example is a dual port HBA. There will be two WWPN's (one for each port) and only a single WWN for the card itself. Question #1: Which is correct? I’m almost positive I read that every “Port” has a WWN. My next question is about the 24 bit FC address that is dynamically allocated to a port when it is introduced to the switch. The Domain ID field is defined as: "a unique number provided to each switch in the fabric." Question #2: Do Domain IDs only apply to switch ports? For example what would the Domain ID be for a HBA? None? The same as the switch port it is connected to? Question #3: My last question is about the Name Server of a switch. A book example shows the routing of a message through the switch. It uses the WWNs of the source and destination ports to route the message. I am assuming that the Name Server must associate the WWN and the FC address in some way in order to route the message, correct?

  Read the article

• VLAN ACLs and when to go Layer 3

  - by wuckachucka

  I want to: a) segment several departments into VLANs with the hopes of restricting access between them completely (Sales never needs to talk to Support's workstations or printers and vice-versa) or b) certain IP addresses and TCP/UDP ports across VLANS -- i.e. permitting the Sales VLAN to access the CRM Web Server in the Server VLAN on port 443 only. Port-wise, I'll need a 48-port switch and another 24-port switch to go with the two existing 24-port Layer 2 switches (Linksys); I'm looking at going with D-Links or HP Procurves as Cisco is out of our price range. Question #1: From what I understand (and please correct me if I'm wrong), if the Servers (VLAN10) and Sales (VLAN20) are all on the same 48-port switch (or two stacked 24-port switches), afaik, the switch "knows" what VLANs and ports each device belongs to and will switch packets between them; I can also apply ACLs to restrict access between VLANs at this point. Is this correct? Question #2: Now lets say that Support (VLAN30) is on a different switch (one of the Linksys) switches. I'm assuming I'll need to trunk (tag) switch #2's VLANs across to switch #1, so switch #1 sees switch #2's VLAN30 (and vice-versa). Once Switch #1 can "see" VLAN30, I'm assuming I can then apply ACLs as stated in Question #1. Is this correct? Question #3: Once Switch #1 can see all the VLANs, can I achieve the seemingly "Layer 3" ACL filtering of restricting access to Server VLAN on only certain TCP/UDP ports and IP addresses (say, only permitting 3389 to the Terminal Server, 192.168.10.4/32). I say "seemingly" because some of the Layer 2 switches mention the ability to restrict ports and IP addresses through the ACLs; I (perhaps mistakenly) thought that in order to have Layer 3 ACLs (packet filtering), I'd need to have at least one Layer 3 switch acting as a core router. If my assumptions are incorrect, at which point do you need a Layer 3 switch for inter-VLAN routing vs. inter-VLAN switching? Is it generally only when you need that higher-level packet filtering ability between your departments?

  Read the article

• getting base url of web site's root (absolute/relative url)

  - by uzay95

  I want to completely understand how to use relative and absolute url address in static and dynamic files. ~ : / : .. : in a relative URL indicates the parent directory . : refers to the current directory / : always replaces the entire pathname of the base URL // : always replaces everything from the hostname onwards This example is easy when you are working without virtual directory. But i am working on virtual directory. Relative URI Absolute URI about.html http://WebReference.com/html/about.html tutorial1/ http://WebReference.com/html/tutorial1/ tutorial1/2.html http://WebReference.com/html/tutorial1/2.html / http://WebReference.com/ //www.internet.com/ http://www.internet.com/ /experts/ http://WebReference.com/experts/ ../ http://WebReference.com/ ../experts/ http://WebReference.com/experts/ ../../../ http://WebReference.com/ ./ http://WebReference.com/html/ ./about.html http://WebReference.com/html/about.html I want to simulate a site below, like my project which is working on virtual directory. These are my aspx and ascx folder http://hostAddress:port/virtualDirectory/MainSite/ASPX/default.aspx http://hostAddress:port/virtualDirectory/MainSite/ASCX/UserCtrl/login.ascx http://hostAddress:port/virtualDirectory/AdminSite/ASPX/ASCX/default.aspx These are my JS Files(which will be use both with the aspx and ascx files): http://hostAddress:port/virtualDirectory/MainSite/JavascriptFolder/jsFile.js http://hostAddress:port/virtualDirectory/AdminSite/JavascriptFolder/jsFile.js this is my static web page address(I want to show some pictures and run inside some js functions): http://hostAddress:port/virtualDirectory/HTMLFiles/page.html this is my image folder http://hostAddress:port/virtualDirectory/Images/PNG/arrow.png http://hostAddress:port/virtualDirectory/Images/GIF/arrow.png if i want to write and image file's link in my ASPX file i should write aspxImgCtrl.ImageUrl = Server.MapPath("~")+"/Images/GIF/arrow.png"; But if i want to write the path hard coded or from javascript file, what kind of url address it should be?

  Read the article

• PF, load balanced gateways, and Squid

  - by Santa

  Hi, So I have a FreeBSD router running PF and Squid, and it has three network interfaces: two connected to upstream providers (em0 and em1 respectively), and one for LAN (re0) that we serve. There is some load balancing configured with PF. Basically, it routes all traffic to ports 1-1024 through one interface (em0) and everything else through the other (em1). Now, I have a Squid proxy also running on the box that transparently redirects any HTTP request from LAN to port 3128 in 127.0.0.1. Since Squid redirects this request to HTTP outside, it should follow the load balancing rule through em0, no? The problem is, when we tested it out (by browsing from a computer in the LAN to http://whatismyip.com, it reports the external IP of the em1 interface! When we turn Squid off, the external IP of em0 is reported, as expected. How do I make Squid behave with the load balancing rule that we have set up? Here's the related settings in /etc/pf.conf that I have: ext_if1="em1" # DSL ext_if2="em0" # T1 int_if="re0" ext_gw1="x.x.x.1" ext_gw2="y.y.y.1" int_addr="10.0.0.1" int_net="10.0.0.0/16" dsl_ports = "1024:65535" t1_ports = "1:1023" ... squid=3128 rdr on $int_if inet proto tcp from $int_net \ to any port 80 -> 127.0.0.1 port $squid pass in quick on $int_if route-to lo0 inet proto tcp \ from $int_net to 127.0.0.1 port $squid keep state ... # load balancing pass in on $int_if route-to ($ext_if1 $ext_gw1) \ proto tcp from $int_net to any port $dsl_ports keep state pass in on $int_if route-to ($ext_if1 $ext_gw1) \ proto udp from $int_net to any port $dsl_ports pass in on $int_if route-to ($ext_if2 $ext_gw2) \ proto tcp from $int_net to any port $t1_ports keep state pass in on $int_if route-to ($ext_if2 $ext_gw2) \ proto udp from $int_net to any port $t1_ports Thanks!

  Read the article

• How can I work around WinXP using ports 1025-5000 as ephemeral?

  - by Chris Dolan

  If you create a TCP client socket with port 0 instead of a non-zero port, then the operating system chooses any free ephemeral port for you. Most OSes choose ephemeral ports from the IANA dynamic port range of 49152-65535. However in Windows Server 2003 and earlier (including XP) Microsoft used ports 1025-5000 as the ephemeral range, according to their bind() documentation. I run multiple Java services on the same hardware. On rare occasions, this range collides with well-known ports that I use for other services (e.g. port 4160 for Jini discovery). While rare, this has caused real problems. Is there any easy way to tell Windows or Java to use a different port range for client sockets? Microsoft's docs indicate that I can change the high end of that range via the MaxUserPort TcpIP registry setting, but I see no way to change the low end. Update: I've made some progress on this. It looks like Microsoft has a concept of reserved ports that are exceptions to the ephemeral port range. There's a registry setting that lets you change this permanently and apparently there must be an API to do the same thing because there's a data structure that holds high/low values for reserved port ranges, but I can't find the actual function call anywhere... The registry solution may work, but now I'm fixated on this API.

  Read the article

• Give a reference to a python instance attribute at class definition

  - by Guenther Jehle

  I have a class with attributes which have a reference to another attribute of this class. See class Device, value1 and value2 holding a reference to interface: class Interface(object): def __init__(self): self.port=None class Value(object): def __init__(self, interface, name): self.interface=interface self.name=name def get(self): return "Getting Value \"%s\" with interface \"%s\""%(self.name, self.interface.port) class Device(object): interface=Interface() value1=Value(interface, name="value1") value2=Value(interface, name="value2") def __init__(self, port): self.interface.port=port if __name__=="__main__": d1=Device("Foo") print d1.value1.get() # >>> Getting Value "value1" with interface "Foo" d2=Device("Bar") print d2.value1.get() # >>> Getting Value "value1" with interface "Bar" print d1.value1.get() # >>> Getting Value "value1" with interface "Bar" The last print is wrong, cause d1 should have the interface "Foo". I know whats going wrong: The line interface=Interface() line is executed, when the class definition is parsed (once). So every Device class has the same instance of interface. I could change the Device class to: class Device(object): interface=Interface() value1=Value(interface, name="value1") value2=Value(interface, name="value2") def __init__(self, port): self.interface=Interface() self.interface.port=port So this is also not working: The values still have the reference to the original interface instance and the self.interface is just another instance... The output now is: >>> Getting Value "value1" with interface "None" >>> Getting Value "value1" with interface "None" >>> Getting Value "value1" with interface "None" So how could I solve this the pythonic way? I could setup a function in the Device class to look for attributes with type Value and reassign them the new interface. Isn't this a common problem with a typical solution for it? Thanks!

  Read the article

• I have Oracle SQL Developer Installed, Now What?

  - by thatjeffsmith

  If you’re here because you downloaded a copy of Oracle SQL Developer and now you need help connecting to a database, then you’re in the right place. I’ll show you what you need to get up and going so you can finish your homework, teach yourself Oracle database, or get ready for that job interview. You’ll need about 30 minutes to set everything up…and about 5 years to become proficient with Oracle Oracle Database come with SQL Developer but SQL Developer doesn’t include a database If you install Oracle database, it includes a copy of SQL Developer. If you’re running that copy of SQL Developer, please take a second to upgrade now, as it is WAY out of date. But I’m here to talk to the folks that have downloaded SQL Developer and want to know what to do next. You’ve got it running. You see this ‘Connection’ dialog, and… Where am I connecting to, and who as? You NEED a database Installing SQL Developer does not give you a database. So you’re going to need to install Oracle and create a database, or connect to a database that is already up and running somewhere. Basically you need to know the following: where is this database, what’s it called, and what port is the listener running on? The Default Connection properties in SQL Developer These default settings CAN work, but ONLY if you have installed Oracle Database Express Edition (XE). Localhost is a network alias for 127.0.0.1 which is an IP address that maps to the ‘local’ machine, or the machine you are reading this blog post on. The listener is a service that runs on the server and handles connections for the databases on that machine. You can run a database without a listener and you can run a listener without a database, but you can’t connect to a database on a different server unless both that database and listener are up and running. Each listener ‘listens’ on one or more ports, you need to know the port number for each connection. The default port is 1521, but 1522 is often pretty common. I know all of this sounds very complicated Oracle is a very sophisticated piece of software. It’s not analogous to downloading a mobile phone app and and using it 10 seconds later. It’s not like installing Office/Access either – it requires services, environment setup, kernel tweaks, etc. However. Normally an administrator will setup and install Oracle, create the database, and configure the listener for everyone else to use. They’ll often also setup the connection details for everyone via a ‘TNSNAMES.ORA’ file. This file contains a list of database connection details for folks to browse – kind of like an Oracle database phoneboook. If someone has given you a TNSNAMES.ORA file, or setup your machine to have access to a TNSNAMES file, then you can just switch to the ‘TNS’ connection type, and use the dropdown to select the database you want to connect to. Then you don’t have to worry about the server names, database names, and the port numbers. ORCL – that sounds promising! ORCL is the default SID when creating a new database with the Database Creation Assistant (DBCA). It’s just me, and I need help! No administrator, no database, no nothing. What do you do? You have a few options: Buy a copy of Oracle and download, install, and create a database Download and install XE (FREE!) Download, import, and run our Developer Days Hands-on-Lab (FREE!) If you’re a student (or anyone else) with little to no experience with Oracle, then I recommend the third option. Oracle Technology Network Developer Day: Hands-on Database Application Development Lab The OTN lab runs on a A Virtual Box image which contains: 11gR2 Enterprise Edition copy of Oracle a database and listener running for you to connect to lots of demo data for you to play with SQL Developer installed and ready to connect Some browser based labs you can step through to learn Oracle You download the image, you download and install Virtual Box (also FREE!), then you IMPORT the image you previously downloaded. You then ‘Start’ the image. It will boot a copy of Oracle Enterprise Linux (OEL), start your database, and all that jazz. You can then start up and run SQL Developer inside the image OR you can connect to the database running on the image using the copy of SQL Developer you installed on your host machine. Setup Port Forwarding to Make It Easy to Connect From Your Host When you start the image, it will be assigned an IP address. Depending on what network adapter you select in the image preferences, you may get something that can get out to the internet from your image, something your host machine can see and connect to, or something that kind of just lives out there in a vacuum. You want to avoid the ‘vacuum’ option – unless you’re OK with running SQL Developer inside the Linux image. Open the Virtual Box image properties and go to the Networking options. We’re going to setup port forwarding. This will tell your machine that anything that happens on port 1521 (the default Oracle Listener port), should just go to the image’s port 1521. So I can connect to ‘localhost’ and it will magically get transferred to the image that is running. Oracle Virtual Box Port Forwarding 1521 listener database Now You Just Need a Username and Password The default passwords on this image are all ‘oracle’ – so you can connect as SYS, HR, or whatever – just use ‘oracle’ as the password. The Linux passowrds are all ‘oracle’ too, so you can login as ‘root’ or as ‘oracle’ in the Linux desktop. Connect! Connect as HR to your Oracle database running on the OTN Developer Days Virtual Box image If you’re connecting to someone else’s database, you need to ask the person that manages that environment to create for you an account. Don’t try to ‘guess’ or ‘figure out’ what the username and password is. Introduce yourself, explain your situation, and ask kindly for access. This is your first test – can you connect? I know it’s hard to get started with Oracle. There are however many things we offer to make this easier. You’ll need to do a bit of RTM first though. Once you know what’s required, you will be much more likely to succeed. Of course, if you need help, you know where to find me

  Read the article

• Problem receving in RXTX

  - by drhorrible

  I've been using RXTX for about a year now, without too many problems. I just started a new program to interact with a new piece of hardware, so I reused the connect() method I've used on my other projects, but I have a weird problem I've never seen before. The Problem The device works fine, because when I connect with hyperterminal, I send things and receive what I expect, and Serial Port Monitor(SPM) reflects this. However, when I run the simple hyperterminal-clone I wrote to diagnose the problem I'm having with my main app, bytes are sent, according to SPM, but nothing is received, and my SerialPortEventListener never fires. Even when I check for available data in the main loop, reader.ready() returns false. If I ignore this check, then I get an exception, details below. Relevant section of connect() method // Configure and open port port = (SerialPort) CommPortIdentifier.getPortIdentifier(name) .open(owner,1000) port.setSerialPortParams(baud, databits, stopbits, parity); port.setFlowControlMode(fc_mode); final BufferedReader br = new BufferedReader( new InputStreamReader( port.getInputStream(), "US-ASCII")); // Add listener to print received characters to screen port.addEventListener(new SerialPortEventListener(){ public void serialEvent(SerialPortEvent ev) { try { System.out.println("Received: "+br.readLine()); } catch (IOException e) { e.printStackTrace(); } } }); port.notifyOnDataAvailable(); Exception java.io.IOException: Underlying input stream returned zero bytes at sun.nio.cs.StreamDecoder.readBytes(StreamDecoder.java:268) at sun.nio.cs.StreamDecoder.implRead(StreamDecoder.java:306) at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:158) at java.io.InputStreamReader.read(InputStreamReader.java:167) at java.io.BufferedReader.fill(BufferedReader.java:136) at java.io.BufferedReader.read(BufferedReader.java:157) at <my code> The big question (again) I think I've eliminated all possible hardware problems, so what could be wrong with my code, or the RXTX library? Edit: something interesting When I open hyperterminal after sending a bunch of commands from java that should have gotten responses, all of the responses appear immediately, as if they had been put in the buffer somewhere, but unavailable. Edit 2: Tried something new, same results I ran the code example found here, with the same results. No data came in, but when I switched to a new program, it came all at once. Edit 3 The hardware is fine, and even a different computer has the same problem. I am not using any sort of USB adapter. I've started using PortMon, too, and it's giving me some interesting results. Hyperterminal and RXTX are not using the same settings, and RXTX always polls the port, unlike HyperTerminal, but I still can't see what settings would affect this. As soon as I can isolate the configuration from the constant polling, I'll post my PortMon logs. Edit 4 Is it possible that some sort of Windows update in the last 3 months could have caused this? It has screwed up one of my MATLAB mex-based programs once. Edit 5 I've also noticed some things that are different between HyperTerminal, RXTX, and a separate program I found that communicates with the device (but doesn't do what I want, which is why I'm rolling my own program) HyperTerminal - set to no flow control, but Serial Port Monitor's RTS and DTR indicators are green Other program - not sure what settings it thinks it's using, but only SPM's RTS indicator is green RXTX - no matter what flow control I set, only SPM's CTS and DTR indicators are on. From Serial Port Monitor's help files (paraphrased): the indicators display the state of the serial control lines RTS - Request To Send CTS - Clear To Send DTR - Data Terminal Ready

  Read the article

• Squid + Dans Guardian (simple configuration)

  - by The Digital Ninja

  I just built a new proxy server and compiled the latest versions of squid and dansguardian. We use basic authentication to select what users are allowed outside of our network. It seems squid is working just fine and accepts my username and password and lets me out. But if i connect to dans guardian, it prompts for username and password and then displays a message saying my username is not allowed to access the internet. Its pulling my username for the error message so i know it knows who i am. The part i get confused on is i thought that part was handled all by squid, and squid is working flawlessly. Can someone please double check my config files and tell me if i'm missing something or there is some new option i must set to get this to work. dansguardian.conf # Web Access Denied Reporting (does not affect logging) # # -1 = log, but do not block - Stealth mode # 0 = just say 'Access Denied' # 1 = report why but not what denied phrase # 2 = report fully # 3 = use HTML template file (accessdeniedaddress ignored) - recommended # reportinglevel = 3 # Language dir where languages are stored for internationalisation. # The HTML template within this dir is only used when reportinglevel # is set to 3. When used, DansGuardian will display the HTML file instead of # using the perl cgi script. This option is faster, cleaner # and easier to customise the access denied page. # The language file is used no matter what setting however. # languagedir = '/etc/dansguardian/languages' # language to use from languagedir. language = 'ukenglish' # Logging Settings # # 0 = none 1 = just denied 2 = all text based 3 = all requests loglevel = 3 # Log Exception Hits # Log if an exception (user, ip, URL, phrase) is matched and so # the page gets let through. Can be useful for diagnosing # why a site gets through the filter. on | off logexceptionhits = on # Log File Format # 1 = DansGuardian format 2 = CSV-style format # 3 = Squid Log File Format 4 = Tab delimited logfileformat = 1 # Log file location # # Defines the log directory and filename. #loglocation = '/var/log/dansguardian/access.log' # Network Settings # # the IP that DansGuardian listens on. If left blank DansGuardian will # listen on all IPs. That would include all NICs, loopback, modem, etc. # Normally you would have your firewall protecting this, but if you want # you can limit it to only 1 IP. Yes only one. filterip = # the port that DansGuardian listens to. filterport = 8080 # the ip of the proxy (default is the loopback - i.e. this server) proxyip = 127.0.0.1 # the port DansGuardian connects to proxy on proxyport = 3128 # accessdeniedaddress is the address of your web server to which the cgi # dansguardian reporting script was copied # Do NOT change from the default if you are not using the cgi. # accessdeniedaddress = 'http://YOURSERVER.YOURDOMAIN/cgi-bin/dansguardian.pl' # Non standard delimiter (only used with accessdeniedaddress) # Default is enabled but to go back to the original standard mode dissable it. nonstandarddelimiter = on # Banned image replacement # Images that are banned due to domain/url/etc reasons including those # in the adverts blacklists can be replaced by an image. This will, # for example, hide images from advert sites and remove broken image # icons from banned domains. # 0 = off # 1 = on (default) usecustombannedimage = 1 custombannedimagefile = '/etc/dansguardian/transparent1x1.gif' # Filter groups options # filtergroups sets the number of filter groups. A filter group is a set of content # filtering options you can apply to a group of users. The value must be 1 or more. # DansGuardian will automatically look for dansguardianfN.conf where N is the filter # group. To assign users to groups use the filtergroupslist option. All users default # to filter group 1. You must have some sort of authentication to be able to map users # to a group. The more filter groups the more copies of the lists will be in RAM so # use as few as possible. filtergroups = 1 filtergroupslist = '/etc/dansguardian/filtergroupslist' # Authentication files location bannediplist = '/etc/dansguardian/bannediplist' exceptioniplist = '/etc/dansguardian/exceptioniplist' banneduserlist = '/etc/dansguardian/banneduserlist' exceptionuserlist = '/etc/dansguardian/exceptionuserlist' # Show weighted phrases found # If enabled then the phrases found that made up the total which excedes # the naughtyness limit will be logged and, if the reporting level is # high enough, reported. on | off showweightedfound = on # Weighted phrase mode # There are 3 possible modes of operation: # 0 = off = do not use the weighted phrase feature. # 1 = on, normal = normal weighted phrase operation. # 2 = on, singular = each weighted phrase found only counts once on a page. # weightedphrasemode = 2 # Positive result caching for text URLs # Caches good pages so they don't need to be scanned again # 0 = off (recommended for ISPs with users with disimilar browsing) # 1000 = recommended for most users # 5000 = suggested max upper limit urlcachenumber = # # Age before they are stale and should be ignored in seconds # 0 = never # 900 = recommended = 15 mins urlcacheage = # Smart and Raw phrase content filtering options # Smart is where the multiple spaces and HTML are removed before phrase filtering # Raw is where the raw HTML including meta tags are phrase filtered # CPU usage can be effectively halved by using setting 0 or 1 # 0 = raw only # 1 = smart only # 2 = both (default) phrasefiltermode = 2 # Lower casing options # When a document is scanned the uppercase letters are converted to lower case # in order to compare them with the phrases. However this can break Big5 and # other 16-bit texts. If needed preserve the case. As of version 2.7.0 accented # characters are supported. # 0 = force lower case (default) # 1 = do not change case preservecase = 0 # Hex decoding options # When a document is scanned it can optionally convert %XX to chars. # If you find documents are getting past the phrase filtering due to encoding # then enable. However this can break Big5 and other 16-bit texts. # 0 = disabled (default) # 1 = enabled hexdecodecontent = 0 # Force Quick Search rather than DFA search algorithm # The current DFA implementation is not totally 16-bit character compatible # but is used by default as it handles large phrase lists much faster. # If you wish to use a large number of 16-bit character phrases then # enable this option. # 0 = off (default) # 1 = on (Big5 compatible) forcequicksearch = 0 # Reverse lookups for banned site and URLs. # If set to on, DansGuardian will look up the forward DNS for an IP URL # address and search for both in the banned site and URL lists. This would # prevent a user from simply entering the IP for a banned address. # It will reduce searching speed somewhat so unless you have a local caching # DNS server, leave it off and use the Blanket IP Block option in the # bannedsitelist file instead. reverseaddresslookups = off # Reverse lookups for banned and exception IP lists. # If set to on, DansGuardian will look up the forward DNS for the IP # of the connecting computer. This means you can put in hostnames in # the exceptioniplist and bannediplist. # It will reduce searching speed somewhat so unless you have a local DNS server, # leave it off. reverseclientiplookups = off # Build bannedsitelist and bannedurllist cache files. # This will compare the date stamp of the list file with the date stamp of # the cache file and will recreate as needed. # If a bsl or bul .processed file exists, then that will be used instead. # It will increase process start speed by 300%. On slow computers this will # be significant. Fast computers do not need this option. on | off createlistcachefiles = on # POST protection (web upload and forms) # does not block forms without any file upload, i.e. this is just for # blocking or limiting uploads # measured in kibibytes after MIME encoding and header bumph # use 0 for a complete block # use higher (e.g. 512 = 512Kbytes) for limiting # use -1 for no blocking #maxuploadsize = 512 #maxuploadsize = 0 maxuploadsize = -1 # Max content filter page size # Sometimes web servers label binary files as text which can be very # large which causes a huge drain on memory and cpu resources. # To counter this, you can limit the size of the document to be # filtered and get it to just pass it straight through. # This setting also applies to content regular expression modification. # The size is in Kibibytes - eg 2048 = 2Mb # use 0 for no limit maxcontentfiltersize = # Username identification methods (used in logging) # You can have as many methods as you want and not just one. The first one # will be used then if no username is found, the next will be used. # * proxyauth is for when basic proxy authentication is used (no good for # transparent proxying). # * ntlm is for when the proxy supports the MS NTLM authentication # protocol. (Only works with IE5.5 sp1 and later). **NOT IMPLEMENTED** # * ident is for when the others don't work. It will contact the computer # that the connection came from and try to connect to an identd server # and query it for the user owner of the connection. usernameidmethodproxyauth = on usernameidmethodntlm = off # **NOT IMPLEMENTED** usernameidmethodident = off # Preemptive banning - this means that if you have proxy auth enabled and a user accesses # a site banned by URL for example they will be denied straight away without a request # for their user and pass. This has the effect of requiring the user to visit a clean # site first before it knows who they are and thus maybe an admin user. # This is how DansGuardian has always worked but in some situations it is less than # ideal. So you can optionally disable it. Default is on. # As a side effect disabling this makes AD image replacement work better as the mime # type is know. preemptivebanning = on # Misc settings # if on it adds an X-Forwarded-For: <clientip> to the HTTP request # header. This may help solve some problem sites that need to know the # source ip. on | off forwardedfor = on # if on it uses the X-Forwarded-For: <clientip> to determine the client # IP. This is for when you have squid between the clients and DansGuardian. # Warning - headers are easily spoofed. on | off usexforwardedfor = off # if on it logs some debug info regarding fork()ing and accept()ing which # can usually be ignored. These are logged by syslog. It is safe to leave # it on or off logconnectionhandlingerrors = on # Fork pool options # sets the maximum number of processes to sporn to handle the incomming # connections. Max value usually 250 depending on OS. # On large sites you might want to try 180. maxchildren = 180 # sets the minimum number of processes to sporn to handle the incomming connections. # On large sites you might want to try 32. minchildren = 32 # sets the minimum number of processes to be kept ready to handle connections. # On large sites you might want to try 8. minsparechildren = 8 # sets the minimum number of processes to sporn when it runs out # On large sites you might want to try 10. preforkchildren = 10 # sets the maximum number of processes to have doing nothing. # When this many are spare it will cull some of them. # On large sites you might want to try 64. maxsparechildren = 64 # sets the maximum age of a child process before it croaks it. # This is the number of connections they handle before exiting. # On large sites you might want to try 10000. maxagechildren = 5000 # Process options # (Change these only if you really know what you are doing). # These options allow you to run multiple instances of DansGuardian on a single machine. # Remember to edit the log file path above also if that is your intention. # IPC filename # # Defines IPC server directory and filename used to communicate with the log process. ipcfilename = '/tmp/.dguardianipc' # URL list IPC filename # # Defines URL list IPC server directory and filename used to communicate with the URL # cache process. urlipcfilename = '/tmp/.dguardianurlipc' # PID filename # # Defines process id directory and filename. #pidfilename = '/var/run/dansguardian.pid' # Disable daemoning # If enabled the process will not fork into the background. # It is not usually advantageous to do this. # on|off ( defaults to off ) nodaemon = off # Disable logging process # on|off ( defaults to off ) nologger = off # Daemon runas user and group # This is the user that DansGuardian runs as. Normally the user/group nobody. # Uncomment to use. Defaults to the user set at compile time. # daemonuser = 'nobody' # daemongroup = 'nobody' # Soft restart # When on this disables the forced killing off all processes in the process group. # This is not to be confused with the -g run time option - they are not related. # on|off ( defaults to off ) softrestart = off maxcontentramcachescansize = 2000 maxcontentfilecachescansize = 20000 downloadmanager = '/etc/dansguardian/downloadmanagers/default.conf' authplugin = '/etc/dansguardian/authplugins/proxy-basic.conf' Squid.conf http_port 3128 hierarchy_stoplist cgi-bin ? acl QUERY urlpath_regex cgi-bin \? cache deny QUERY acl apache rep_header Server ^Apache #broken_vary_encoding allow apache access_log /squid/var/logs/access.log squid hosts_file /etc/hosts auth_param basic program /squid/libexec/ncsa_auth /squid/etc/userbasic.auth auth_param basic children 5 auth_param basic realm proxy auth_param basic credentialsttl 2 hours auth_param basic casesensitive off refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern . 0 20% 4320 acl NoAuthNec src <HIDDEN FOR SECURITY> acl BrkRm src <HIDDEN FOR SECURITY> acl Dials src <HIDDEN FOR SECURITY> acl Comps src <HIDDEN FOR SECURITY> acl whsws dstdom_regex -i .opensuse.org .novell.com .suse.com mirror.mcs.an1.gov mirrors.kernerl.org www.suse.de suse.mirrors.tds.net mirrros.usc.edu ftp.ale.org suse.cs.utah.edu mirrors.usc.edu mirror.usc.an1.gov linux.nssl.noaa.gov noaa.gov .kernel.org ftp.ale.org ftp.gwdg.de .medibuntu.org mirrors.xmission.com .canonical.com .ubuntu. acl opensites dstdom_regex -i .mbsbooks.com .bowker.com .usps.com .usps.gov .ups.com .fedex.com go.microsoft.com .microsoft.com .apple.com toolbar.msn.com .contacts.msn.com update.services.openoffice.org fms2.pointroll.speedera.net services.wmdrm.windowsmedia.com windowsupdate.com .adobe.com .symantec.com .vitalbook.com vxn1.datawire.net vxn.datawire.net download.lavasoft.de .download.lavasoft.com .lavasoft.com updates.ls-servers.com .canadapost. .myyellow.com minirick symantecliveupdate.com wm.overdrive.com www.overdrive.com productactivation.one.microsoft.com www.update.microsoft.com testdrive.whoson.com www.columbia.k12.mo.us banners.wunderground.com .kofax.com .gotomeeting.com tools.google.com .dl.google.com .cache.googlevideo.com .gpdl.google.com .clients.google.com cache.pack.google.com kh.google.com maps.google.com auth.keyhole.com .contacts.msn.com .hrblock.com .taxcut.com .merchantadvantage.com .jtv.com .malwarebytes.org www.google-analytics.com dcs.support.xerox.com .dhl.com .webtrendslive.com javadl-esd.sun.com javadl-alt.sun.com .excelsior.edu .dhlglobalmail.com .nessus.org .foxitsoftware.com foxit.vo.llnwd.net installshield.com .mindjet.com .mediascouter.com media.us.elsevierhealth.com .xplana.com .govtrack.us sa.tulsacc.edu .omniture.com fpdownload.macromedia.com webservices.amazon.com acl password proxy_auth REQUIRED acl all src all acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 acl to_localhost dst 127.0.0.0/8 acl SSL_ports port 443 563 631 2001 2005 8731 9001 9080 10000 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port # https, snews 443 563 acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port # unregistered ports 1936-65535 acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 10000 acl Safe_ports port 631 acl Safe_ports port 901 # SWAT acl purge method PURGE acl CONNECT method CONNECT acl UTubeUsers proxy_auth "/squid/etc/utubeusers.list" acl RestrictUTube dstdom_regex -i youtube.com acl RestrictFacebook dstdom_regex -i facebook.com acl FacebookUsers proxy_auth "/squid/etc/facebookusers.list" acl BuemerKEC src 10.10.128.0/24 acl MBSsortnet src 10.10.128.0/26 acl MSNExplorer browser -i MSN acl Printers src <HIDDEN FOR SECURITY> acl SpecialFolks src <HIDDEN FOR SECURITY> # streaming download acl fails rep_mime_type ^.*mms.* acl fails rep_mime_type ^.*ms-hdr.* acl fails rep_mime_type ^.*x-fcs.* acl fails rep_mime_type ^.*x-ms-asf.* acl fails2 urlpath_regex dvrplayer mediastream mms:// acl fails2 urlpath_regex \.asf$ \.afx$ \.flv$ \.swf$ acl deny_rep_mime_flashvideo rep_mime_type -i video/flv acl deny_rep_mime_shockwave rep_mime_type -i ^application/x-shockwave-flash$ acl x-type req_mime_type -i ^application/octet-stream$ acl x-type req_mime_type -i application/octet-stream acl x-type req_mime_type -i ^application/x-mplayer2$ acl x-type req_mime_type -i application/x-mplayer2 acl x-type req_mime_type -i ^application/x-oleobject$ acl x-type req_mime_type -i application/x-oleobject acl x-type req_mime_type -i application/x-pncmd acl x-type req_mime_type -i ^video/x-ms-asf$ acl x-type2 rep_mime_type -i ^application/octet-stream$ acl x-type2 rep_mime_type -i application/octet-stream acl x-type2 rep_mime_type -i ^application/x-mplayer2$ acl x-type2 rep_mime_type -i application/x-mplayer2 acl x-type2 rep_mime_type -i ^application/x-oleobject$ acl x-type2 rep_mime_type -i application/x-oleobject acl x-type2 rep_mime_type -i application/x-pncmd acl x-type2 rep_mime_type -i ^video/x-ms-asf$ acl RestrictHulu dstdom_regex -i hulu.com acl broken dstdomain cms.montgomerycollege.edu events.columbiamochamber.com members.columbiamochamber.com public.genexusserver.com acl RestrictVimeo dstdom_regex -i vimeo.com acl http_port port 80 #http_reply_access deny deny_rep_mime_flashvideo #http_reply_access deny deny_rep_mime_shockwave #streaming files #http_access deny fails #http_reply_access deny fails #http_access deny fails2 #http_reply_access deny fails2 #http_access deny x-type #http_reply_access deny x-type #http_access deny x-type2 #http_reply_access deny x-type2 follow_x_forwarded_for allow localhost acl_uses_indirect_client on log_uses_indirect_client on http_access allow manager localhost http_access deny manager http_access allow purge localhost http_access deny purge http_access allow SpecialFolks http_access deny CONNECT !SSL_ports http_access allow whsws http_access allow opensites http_access deny BuemerKEC !MBSsortnet http_access deny BrkRm RestrictUTube RestrictFacebook RestrictVimeo http_access allow RestrictUTube UTubeUsers http_access deny RestrictUTube http_access allow RestrictFacebook FacebookUsers http_access deny RestrictFacebook http_access deny RestrictHulu http_access allow NoAuthNec http_access allow BrkRm http_access allow FacebookUsers RestrictVimeo http_access deny RestrictVimeo http_access allow Comps http_access allow Dials http_access allow Printers http_access allow password http_access deny !Safe_ports http_access deny SSL_ports !CONNECT http_access allow http_port http_access deny all http_reply_access allow all icp_access allow all access_log /squid/var/logs/access.log squid visible_hostname proxy.site.com forwarded_for off coredump_dir /squid/cache/ #header_access Accept-Encoding deny broken #acl snmppublic snmp_community mysecretcommunity #snmp_port 3401 #snmp_access allow snmppublic all cache_mem 3 GB #acl snmppublic snmp_community mbssquid #snmp_port 3401 #snmp_access allow snmppublic all

  Read the article

• Lion built-in VPN client times out connecting to Windows 2003 PPTP server

  - by beporter

  I have a new iMac with OS X 10.7 (Lion) on it that refuses to connect to a PPTP-based VPN server (running Windows 2003 SBS). To shortcut past a lot of questions: There is a Dell workstation running Windows 7 on the same LAN as the Mac that is able to establish a PPTP connection to the same VPN server using the same credentials. That would seem to rule out any possible problems with the server, the port forwards on the server's firewall, the internet connection between the two, and the router local to the Dell and iMac. Here's a "verbose" dump of the PPP log from the iMac: Tue Sep 6 10:13:11 2011 : using link 0 Tue Sep 6 10:13:11 2011 : Using interface ppp0 Tue Sep 6 10:13:11 2011 : Connect: ppp0 socket[34:17] Tue Sep 6 10:13:11 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:11 2011 : PPTP port-mapping for en0, interfaceIndex: 0, Protocol: None, Private Port: 0, Public Address: 45f6f181, Public Port: 0, TTL: 0. Tue Sep 6 10:13:11 2011 : PPTP port-mapping for en0 inconsistent. is Connected: 1, Previous interface: 4, Current interface 0 Tue Sep 6 10:13:11 2011 : PPTP port-mapping for en0 initialized. is Connected: 1, Previous publicAddress: (0), Current publicAddress 45f6f181 Tue Sep 6 10:13:11 2011 : PPTP port-mapping for en0 fully initialized. Flagging up Tue Sep 6 10:13:14 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:17 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:20 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:23 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:26 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:29 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:32 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:35 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:38 2011 : sent [LCP ConfReq id=0x1 ] Tue Sep 6 10:13:41 2011 : LCP: timeout sending Config-Requests Tue Sep 6 10:13:41 2011 : Connection terminated. Tue Sep 6 10:13:41 2011 : PPTP disconnecting... Tue Sep 6 10:13:41 2011 : PPTP clearing port-mapping for en0 Tue Sep 6 10:13:41 2011 : PPTP disconnected The error seems to be focused around the line, LCP: timeout sending Config-Requests, but I haven't had any luck in finding troubleshooting information for this. I've tried completely deleting the entire VPN "connection" from the Network prefpane and recreating it from scratch. I am certain the connection details are correct because they exactly match what successfully connects from the Win7 machine sitting next to the iMac. Any suggestions?

  Read the article

• Glassfish V3 won't start

  - by Zakaria

  Hi everybody, I installed NetBeans 6.8 and tried to run the GlasshFish V3 server. I'm working under Windows Vista 32 Bits. First, it won't run. Then I modified the c:\Windows\System32\drivers\etc\hosts file and put the following line into it: 127.0.0.1 localhost And when I run the GlasshFish V3 Server, no error is showing but only "INFOs" are displayed: 3 avr. 2010 19:23:19 com.sun.enterprise.glassfish.bootstrap.ASMain main INFO: Launching GlassFish on Felix platform Welcome to Felix ================ INFO: Perform lazy SSL initialization for the listener 'http-listener-2' INFO: Starting Grizzly Framework 1.9.18-k - Sat Apr 03 19:23:24 CEST 2010 INFO: Starting Grizzly Framework 1.9.18-k - Sat Apr 03 19:23:25 CEST 2010 INFO: Grizzly Framework 1.9.18-k started in: 423ms listening on port 35127 INFO: GlassFish v3 (74.2) startup time : Felix(4456ms) startup services(1709ms) total(6165ms) INFO: Grizzly Framework 1.9.18-k started in: 459ms listening on port 35116 INFO: Grizzly Framework 1.9.18-k started in: 428ms listening on port 35155 INFO: Grizzly Framework 1.9.18-k started in: 470ms listening on port 35160 INFO: Grizzly Framework 1.9.18-k started in: 513ms listening on port 35159 INFO: javassist.util.proxy.ProxyFactory.classLoaderProvider = org.glassfish.weld.WeldActivator$GlassFishClassLoaderProvider@5be8f4 INFO: Hibernate Validator bean-validator-3.0-JBoss-4.0.2 INFO: Binding RMI port to *:35165 INFO: Instantiated an instance of org.hibernate.validator.engine.resolver.JPATraversableResolver. INFO: JMXStartupService: Started JMXConnector, JMXService URL = service:jmx:rmi://PC-de-Charlotte:35165/jndi/rmi://PC-de-Charlotte:35165/jmxrmi INFO: Using com.sun.enterprise.transaction.jts.JavaEETransactionManagerJTSDelegate as the delegate INFO: [Thread[GlassFish Kernel Main Thread,5,main]] started INFO: Grizzly Framework 1.9.18-k started in: 150ms listening on port 35159 INFO: Perform lazy SSL initialization for the listener 'http-listener-2' INFO: {felix.fileinstall.poll (ms) = 5000, felix.fileinstall.dir = C:\Program Files\sges-v3\glassfish\modules\autostart, felix.fileinstall.debug = 1, felix.fileinstall.bundles.new.start = true, felix.fileinstall.tmpdir = C:\Users\CHARLO~1\AppData\Local\Temp\fileinstall-330907148519261411, felix.fileinstall.filter = null} INFO: {felix.fileinstall.poll (ms) = 5000, felix.fileinstall.dir = C:\Users\Charlotte\.netbeans\6.8\GlassFish_v3\autodeploy\bundles, felix.fileinstall.debug = 1, felix.fileinstall.bundles.new.start = true, felix.fileinstall.tmpdir = C:\Users\CHARLO~1\AppData\Local\Temp\fileinstall-2938963288421854459, felix.fileinstall.filter = null} INFO: Grizzly Framework 1.9.18-k started in: 95ms listening on port 35160 INFO: Updating configuration from org.apache.felix.fileinstall-autodeploy-bundles.cfg INFO: Installed C:\Program Files\sges-v3\glassfish\modules\autostart\org.apache.felix.fileinstall-autodeploy-bundles.cfg INFO: {felix.fileinstall.poll (ms) = 5000, felix.fileinstall.dir = C:\Users\Charlotte\.netbeans\6.8\GlassFish_v3\autodeploy\bundles, felix.fileinstall.debug = 1, felix.fileinstall.bundles.new.start = true, felix.fileinstall.tmpdir = C:\Users\CHARLO~1\AppData\Local\Temp\fileinstall-6474085409014899009, felix.fileinstall.filter = null} And there is no message such as "Glassfish started"! So, when I try to access to the admin web interface: localhost:4848 or localhost:8080 or localhost:8181 , It doesn't work. What should I do? Thank you very much, Regards.

  Read the article

• Preventing Gigabit Loss due to printers [on hold]

  - by Charles

  HOW CAN I MAINTAIN Gigabit Ethernet integrity given this situation: What I have to work with: ** AC-router w/4 port gigabit N-600 router w/4 port gigabit Switch w/8 port gigabit All PCs have gigabit NICs 4-port POE injector at gigabit (all wiring = Cat 6) **Problem = Printer @ 10/100 (built-in) Printer @ 10/100 (built-in) Scanner @ 10/100 (built-in) Printer @ 10/100 (built-in)** What device (not setting up a PC) or configuration would I have to incorporate to get gigabit going given those devices? WILD SHOT: IS THERE SUCH A THING AS A SWITCH THAT CAN ACCOMMODATE THIS? THANK YOU ALL

  Read the article

• Redirect local service to custom proxy

  - by Pedro Laguna

  Hello, I'm trying to create a custom proxy program but I have a problem. My program connects to a fixed port from a random port and I need to tunnel all this traffic by my local proxy. I think the solution is using iptables, but all the topics I found are related to redirect incoming connections, not outbounds. How can I redirect all the traffic from a local port to another local port and later to the internet? Thanks,

  Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >